Sat, 06 Jun 2020 08:50:36 +0100add comment
Mario de Sousa <msousa@fe.up.pt> [Sat, 06 Jun 2020 08:50:36 +0100] rev 2660
add comment

Sat, 06 Jun 2020 08:43:41 +0100merge
Mario de Sousa <msousa@fe.up.pt> [Sat, 06 Jun 2020 08:43:41 +0100] rev 2659
merge

Sat, 06 Jun 2020 07:34:02 +0100Modbus plugin web configuration: fix comments, and delete un-used code
Mario de Sousa <msousa@fe.up.pt> [Sat, 06 Jun 2020 07:34:02 +0100] rev 2658
Modbus plugin web configuration: fix comments, and delete un-used code

Sat, 06 Jun 2020 07:24:42 +0100Modbus plugin web configuration: use drop down choices for baud, parity and stop bits.
Mario de Sousa <msousa@fe.up.pt> [Sat, 06 Jun 2020 07:24:42 +0100] rev 2657
Modbus plugin web configuration: use drop down choices for baud, parity and stop bits.

Fri, 05 Jun 2020 18:02:12 +0100Modbus plugin web configuration: save node type and addr type to persistant storage
Mario de Sousa <msousa@fe.up.pt> [Fri, 05 Jun 2020 18:02:12 +0100] rev 2656
Modbus plugin web configuration: save node type and addr type to persistant storage

Mon, 01 Jun 2020 14:11:22 +0100Add web extension: configure Modbus Server plugin parameters
Mario de Sousa <msousa@fe.up.pt> [Mon, 01 Jun 2020 14:11:22 +0100] rev 2655
Add web extension: configure Modbus Server plugin parameters

Mon, 01 Jun 2020 08:54:26 +0100Add web extension: configure Modbus plugin parameters (currently only supports Modbus clients)
Mario de Sousa <msousa@fe.up.pt> [Mon, 01 Jun 2020 08:54:26 +0100] rev 2654
Add web extension: configure Modbus plugin parameters (currently only supports Modbus clients)

Tue, 02 Jun 2020 13:37:34 +0200Runtime: create .md5 file at the end of all transfered files being written to disk, so that it presence indicates completeness of transfer.
Edouard Tisserant [Tue, 02 Jun 2020 13:37:34 +0200] rev 2653
Runtime: create .md5 file at the end of all transfered files being written to disk, so that it presence indicates completeness of transfer.

Tue, 02 Jun 2020 11:34:50 +0200IDE: Main toolbar : Show repair button also in stop mode. Move repair button after disconnect button.
Edouard Tisserant [Tue, 02 Jun 2020 11:34:50 +0200] rev 2652
IDE: Main toolbar : Show repair button also in stop mode. Move repair button after disconnect button.

Mon, 01 Jun 2020 14:47:31 +0200Runtime: fsync() files when transfering them, to prebent data loss when poweroff soon after programming. Fixed variable naming as a side effect.
Edouard Tisserant [Mon, 01 Jun 2020 14:47:31 +0200] rev 2651
Runtime: fsync() files when transfering them, to prebent data loss when poweroff soon after programming. Fixed variable naming as a side effect.

Thu, 28 May 2020 11:16:59 +0100merge
Mario de Sousa <msousa@fe.up.pt> [Thu, 28 May 2020 11:16:59 +0100] rev 2650
merge

Thu, 28 May 2020 11:15:22 +0100BACnet plugin: Add web interface for online parameter configuration
Mario de Sousa <msousa@fe.up.pt> [Thu, 28 May 2020 11:15:22 +0100] rev 2649
BACnet plugin: Add web interface for online parameter configuration

Thu, 28 May 2020 11:01:42 +0100modbus_plugin: generate nicer error message, instead of a traceback
Mario de Sousa <msousa@fe.up.pt> [Thu, 28 May 2020 11:01:42 +0100] rev 2648
modbus_plugin: generate nicer error message, instead of a traceback

Thu, 28 May 2020 10:54:48 +0100Modbus plugin: Add "exec. req. flag" and "write on change" features
Mario de Sousa <msousa@fe.up.pt> [Thu, 28 May 2020 10:54:48 +0100] rev 2647
Modbus plugin: Add "exec. req. flag" and "write on change" features

Thu, 28 May 2020 11:38:09 +0200PLCObject : reorganize code in StartPLC(), add a PreStartPLC() empty method, to be overloaded by runtime extensions.
Edouard Tisserant [Thu, 28 May 2020 11:38:09 +0200] rev 2646
PLCObject : reorganize code in StartPLC(), add a PreStartPLC() empty method, to be overloaded by runtime extensions.

Tue, 26 May 2020 09:58:20 +0200Solve import order problem when POULibrary imports ConfigTreeNode because of UserAddressedException. Now UserAddressedException is declared in POULibrary.py, as a quick and dirty fix, but some independant module should be created for beremiz exceptions in general.
Edouard Tisserant [Tue, 26 May 2020 09:58:20 +0200] rev 2645
Solve import order problem when POULibrary imports ConfigTreeNode because of UserAddressedException. Now UserAddressedException is declared in POULibrary.py, as a quick and dirty fix, but some independant module should be created for beremiz exceptions in general.

Wed, 18 Dec 2019 13:31:22 +0100Add --on-plc-start --on-plc-stop and --status-change to runtime command line, calling given command respectively on start stop or any event. Command line string is python formated (to eventually include status with {}) before being split (supports quoted strings) and passed to Popen for non-blocking execution.
Edouard Tisserant [Wed, 18 Dec 2019 13:31:22 +0100] rev 2644
Add --on-plc-start --on-plc-stop and --status-change to runtime command line, calling given command respectively on start stop or any event. Command line string is python formated (to eventually include status with {}) before being split (supports quoted strings) and passed to Popen for non-blocking execution.

Mon, 25 Nov 2019 08:10:45 +0100Etherlab : Merged 2014-2018 changes from jblee and others
Edouard Tisserant <edouard.tisserant@gmail.com> [Mon, 25 Nov 2019 08:10:45 +0100] rev 2643
Etherlab : Merged 2014-2018 changes from jblee and others

Mon, 25 Nov 2019 08:26:55 +0100Close branch ethercat_from_kosmos ethercat_from_kosmos
Edouard Tisserant <edouard.tisserant@gmail.com> [Mon, 25 Nov 2019 08:26:55 +0100] rev 2642
Close branch ethercat_from_kosmos

Wed, 20 Nov 2019 16:57:15 +0100EtherCat master plugin : commit changes recovered from KOSMOS 2018 installer, unkown author(s). ethercat_from_kosmos
Edouard Tisserant <edouard.tisserant@gmail.com> [Wed, 20 Nov 2019 16:57:15 +0100] rev 2641
EtherCat master plugin : commit changes recovered from KOSMOS 2018 installer, unkown author(s).

Wed, 13 Nov 2019 11:21:04 +0100Add FatalError() method to ConfigTreeNode.
Edouard Tisserant [Wed, 13 Nov 2019 11:21:04 +0100] rev 2640
Add FatalError() method to ConfigTreeNode.
Extensions can report error addressed to user, without a traceback.

Thu, 24 Oct 2019 11:20:04 +0200Fixed one more sequel of marking temporary variables created while generating ST code out of FBD
Edouard Tisserant <edouard.tisserant@gmail.com> [Thu, 24 Oct 2019 11:20:04 +0200] rev 2639
Fixed one more sequel of marking temporary variables created while generating ST code out of FBD

Wed, 09 Oct 2019 09:04:35 +0200Changed yslt_noindent.yml2 again
Edouard Tisserant [Wed, 09 Oct 2019 09:04:35 +0200] rev 2638
Changed yslt_noindent.yml2 again

Wed, 25 Sep 2019 08:53:27 +0200Non significant changes in generated xslt, side effect of changes in yslt_noindent.yml2
Edouard Tisserant [Wed, 25 Sep 2019 08:53:27 +0200] rev 2637
Non significant changes in generated xslt, side effect of changes in yslt_noindent.yml2

Thu, 19 Sep 2019 15:32:36 +0200More customizations to yslt
Edouard Tisserant [Thu, 19 Sep 2019 15:32:36 +0200] rev 2636
More customizations to yslt

Wed, 18 Sep 2019 11:03:56 +0200PLCobject: Call "stop" and "cleanup" methods from python runtime files in reverse order compared to "init" and "start".
Edouard Tisserant [Wed, 18 Sep 2019 11:03:56 +0200] rev 2635
PLCobject: Call "stop" and "cleanup" methods from python runtime files in reverse order compared to "init" and "start".

Wed, 11 Sep 2019 11:20:11 +0200Non significant changes to mute GCC warnings about unused variables.
Edouard Tisserant [Wed, 11 Sep 2019 11:20:11 +0200] rev 2634
Non significant changes to mute GCC warnings about unused variables.

Thu, 05 Sep 2019 08:35:33 +0200Fixed sequel of earlier commit in PLCGenerator.py. Some ref to temporary variables are still not using the _TMP_ prefix. They are quite hard to find, so to be continued...
Edouard Tisserant [Thu, 05 Sep 2019 08:35:33 +0200] rev 2633
Fixed sequel of earlier commit in PLCGenerator.py. Some ref to temporary variables are still not using the _TMP_ prefix. They are quite hard to find, so to be continued...

Mon, 26 Aug 2019 08:54:02 +0200variable access code moved from plc_debug.c to targets/var_access.c for easiewr re-use in ext.
Edouard Tisserant [Mon, 26 Aug 2019 08:54:02 +0200] rev 2632
variable access code moved from plc_debug.c to targets/var_access.c for easiewr re-use in ext.

Tue, 20 Aug 2019 10:08:11 +0200Swap CTN code gen and Libraries code generation order. In general library part of an extension needs to be computed before CTN part.
Edouard Tisserant [Tue, 20 Aug 2019 10:08:11 +0200] rev 2631
Swap CTN code gen and Libraries code generation order. In general library part of an extension needs to be computed before CTN part.

Tue, 20 Aug 2019 10:01:18 +0200yslt_noindent : Avoid YSLT's indent logic to interfere when using linequote.
Edouard Tisserant [Tue, 20 Aug 2019 10:01:18 +0200] rev 2630
yslt_noindent : Avoid YSLT's indent logic to interfere when using linequote.

Wed, 14 Aug 2019 11:05:17 +0200Add marker to temporary variables created while generating ST code out of FBD, so that they can be recognized as such.
Edouard Tisserant [Wed, 14 Aug 2019 11:05:17 +0200] rev 2629
Add marker to temporary variables created while generating ST code out of FBD, so that they can be recognized as such.

Mon, 12 Aug 2019 13:06:11 +0200Allow using docutil.get_inkscape_path() on Linux also.
Edouard Tisserant [Mon, 12 Aug 2019 13:06:11 +0200] rev 2628
Allow using docutil.get_inkscape_path() on Linux also.

Fri, 09 Aug 2019 12:07:33 +0200Moved XSLT model query python code so that XSLT part can be reused for other transformations
Edouard Tisserant [Fri, 09 Aug 2019 12:07:33 +0200] rev 2627
Moved XSLT model query python code so that XSLT part can be reused for other transformations

Tue, 24 Sep 2019 11:55:59 +0200Fixed unitialized parameter in instances_path stylesheet, leading to
Edouard Tisserant [Tue, 24 Sep 2019 11:55:59 +0200] rev 2626
Fixed unitialized parameter in instances_path stylesheet, leading to
calls to add_instance with no data when passing datatypes insteatd of project
root. That bug was making exceptions (for exemple when editing type) when
having arrays of derivated types in project.

Sun, 14 Jul 2019 08:43:12 +0200Fixed code quality according to pep8 and pylint.
Edouard Tisserant <edouard.tisserant@gmail.com> [Sun, 14 Jul 2019 08:43:12 +0200] rev 2625
Fixed code quality according to pep8 and pylint.

Sat, 13 Jul 2019 10:57:25 +0200Fix exception on exit in some case, sequel of an earlier cleanup commit I couldn't find back. Disconnecting the event is apparently the way to go. https://wiki.wxpython.org/Surviving%20with%20wxEVT%20KILL%20FOCUS%20under%20Microsoft%20Windows
Edouard Tisserant <edouard.tisserant@gmail.com> [Sat, 13 Jul 2019 10:57:25 +0200] rev 2624
Fix exception on exit in some case, sequel of an earlier cleanup commit I couldn't find back. Disconnecting the event is apparently the way to go. https://wiki.wxpython.org/Surviving%20with%20wxEVT%20KILL%20FOCUS%20under%20Microsoft%20Windows

Fri, 12 Jul 2019 11:53:04 +0200PurgeBlobs was faulty, but it was never having anything to purge. Fixed.
Edouard Tisserant [Fri, 12 Jul 2019 11:53:04 +0200] rev 2623
PurgeBlobs was faulty, but it was never having anything to purge. Fixed.

Fri, 12 Jul 2019 11:51:47 +0200Fixed repetitive freezing of IDE when connection drops.
Edouard Tisserant [Fri, 12 Jul 2019 11:51:47 +0200] rev 2622
Fixed repetitive freezing of IDE when connection drops.
when connection lost error was beeing displayed, the involved wxYield
was calling pending plc status periodic update, itself trying to use connector.
At that time connector is still not destroyed and connection
is attempted again when calling GetPLCStatus.
=> Hack : Ensure connector is destroyed before reporting error.

Wed, 10 Jul 2019 11:21:13 +0200Better error handling when blob transfer fail
Edouard Tisserant [Wed, 10 Jul 2019 11:21:13 +0200] rev 2621
Better error handling when blob transfer fail

Wed, 10 Jul 2019 10:43:14 +0200Removed dead code.
Edouard Tisserant [Wed, 10 Jul 2019 10:43:14 +0200] rev 2620
Removed dead code.

Tue, 09 Jul 2019 09:49:30 +0200Now expects 1 more columns in VARIABLE.CSV file generated by MatIEC. Pair with MatIEC commit 9cb7c8bf7dbc :
Edouard Tisserant [Tue, 09 Jul 2019 09:49:30 +0200] rev 2619
Now expects 1 more columns in VARIABLE.CSV file generated by MatIEC. Pair with MatIEC commit 9cb7c8bf7dbc :
Add a column to VARIABLES.CSV, containing variable (derived) type name, additionally to current last column contyaining base type name

Tue, 18 Jun 2019 14:09:23 +0200Merged workaround for loading bug happening after automatic resize of function blocks. It appears that some code in GraphicCommons.py loop endlessly when wires coordinate do not align with x or y axis. Those erroneous coordinate are now filtered out when loaded in the view.
Edouard Tisserant [Tue, 18 Jun 2019 14:09:23 +0200] rev 2618
Merged workaround for loading bug happening after automatic resize of function blocks. It appears that some code in GraphicCommons.py loop endlessly when wires coordinate do not align with x or y axis. Those erroneous coordinate are now filtered out when loaded in the view.

Tue, 18 Jun 2019 14:03:08 +0200Removed debug code and closed branch fix_fb_resize_wire_bug
Edouard Tisserant [Tue, 18 Jun 2019 14:03:08 +0200] rev 2617
Removed debug code and closed branch

Tue, 18 Jun 2019 13:58:45 +0200GraphicCommons.py : Wire.SetPoints() move filtering before computation of Start and End points to avoid setting them with arbitrary directions. fix_fb_resize_wire_bug
Edouard Tisserant [Tue, 18 Jun 2019 13:58:45 +0200] rev 2616
GraphicCommons.py : Wire.SetPoints() move filtering before computation of Start and End points to avoid setting them with arbitrary directions.

Tue, 18 Jun 2019 09:38:20 +0200GraphicCommons.py : rewrote Wire.Setpoints. fix_fb_resize_wire_bug
Edouard Tisserant [Tue, 18 Jun 2019 09:38:20 +0200] rev 2615
GraphicCommons.py : rewrote Wire.Setpoints.
- trying to make it fix diagonal wires,
- wasn't clear what was intended before, so made it clear :
- duplicate point removal
- segment merging (only if asked)
- remove corners made of opposite direction segments

Thu, 13 Jun 2019 15:49:48 +0200'Change POU Type To' becomes 'Duplicate as...', avoiding side effects of type change when POU is already instanciated. Also remove leftover returType tag in ex-function POUs, triggering exceptions at build time.
Edouard Tisserant [Thu, 13 Jun 2019 15:49:48 +0200] rev 2614
'Change POU Type To' becomes 'Duplicate as...', avoiding side effects of type change when POU is already instanciated. Also remove leftover returType tag in ex-function POUs, triggering exceptions at build time.

Thu, 06 Jun 2019 14:03:16 +0200Fix PLCObject's purge failing silently with extra_files.
Edouard Tisserant [Thu, 06 Jun 2019 14:03:16 +0200] rev 2613
Fix PLCObject's purge failing silently with extra_files.