Mon, 21 May 2012 09:31:15 +0200Merged
laurent [Mon, 21 May 2012 09:31:15 +0200] rev 2052
Merged

Fri, 18 May 2012 18:51:07 +0200refactoring
laurent [Fri, 18 May 2012 18:51:07 +0200] rev 2051
refactoring

Mon, 21 May 2012 04:34:10 +0200Fixed example build with installer 1.1
Edouard Tisserant [Mon, 21 May 2012 04:34:10 +0200] rev 2050
Fixed example build with installer 1.1

Sun, 20 May 2012 23:05:36 +0200updated examples also
Edouard Tisserant [Sun, 20 May 2012 23:05:36 +0200] rev 2049
updated examples also

Sun, 20 May 2012 22:42:37 +0200reflected changes in beremiz extension mechanism
Edouard Tisserant [Sun, 20 May 2012 22:42:37 +0200] rev 2048
reflected changes in beremiz extension mechanism

Mon, 14 May 2012 07:43:40 +0900Fixed wrong PDO in unused sync managers\nFix higen drive ethercat example
edouard_and_laurent [Mon, 14 May 2012 07:43:40 +0900] rev 2047
Fixed wrong PDO in unused sync managers\nFix higen drive ethercat example

Mon, 30 Apr 2012 16:21:30 +0200Fix Ethercat xsd files
laurent [Mon, 30 Apr 2012 16:21:30 +0200] rev 2046
Fix Ethercat xsd files

Sun, 01 Apr 2012 16:36:41 +0200Adding test project using higen drive
laurent [Sun, 01 Apr 2012 16:36:41 +0200] rev 2045
Adding test project using higen drive

Sat, 31 Mar 2012 15:13:14 +0200Adding forgotten icons
laurent [Sat, 31 Mar 2012 15:13:14 +0200] rev 2044
Adding forgotten icons

Wed, 21 Mar 2012 11:15:47 +0100Adding plugin icons and replacing reference to DS402 by CIA402
laurent [Wed, 21 Mar 2012 11:15:47 +0100] rev 2043
Adding plugin icons and replacing reference to DS402 by CIA402

Mon, 19 Mar 2012 00:45:19 +0100Adding support for remotely scanning Etherlab network and automatically configure it
laurent [Mon, 19 Mar 2012 00:45:19 +0100] rev 2042
Adding support for remotely scanning Etherlab network and automatically configure it

Sun, 18 Mar 2012 23:57:32 +0100Defining all slaves as Etherlab master subplugin instead of editing them in an editor with vertical notebook
laurent [Sun, 18 Mar 2012 23:57:32 +0100] rev 2041
Defining all slaves as Etherlab master subplugin instead of editing them in an editor with vertical notebook

Sun, 11 Mar 2012 21:57:00 +0100Adding Ethercat network scan command for testing (print result, network configuration not modified)
laurent [Sun, 11 Mar 2012 21:57:00 +0100] rev 2040
Adding Ethercat network scan command for testing (print result, network configuration not modified)

Sun, 11 Mar 2012 21:53:35 +0100Adding support for uploading default value for unused entries in output pdos from slaves before starting master
laurent [Sun, 11 Mar 2012 21:53:35 +0100] rev 2039
Adding support for uploading default value for unused entries in output pdos from slaves before starting master

Sun, 11 Mar 2012 19:32:44 +0100Replacing wx.Grid control by a wx.TreeListCtrl for displaying slaves entries
laurent [Sun, 11 Mar 2012 19:32:44 +0100] rev 2038
Replacing wx.Grid control by a wx.TreeListCtrl for displaying slaves entries

Wed, 29 Feb 2012 12:00:20 +0100Fix bug when trying to drag'n drop variable from slave variables grid
laurent [Wed, 29 Feb 2012 12:00:20 +0100] rev 2037
Fix bug when trying to drag'n drop variable from slave variables grid

Thu, 23 Feb 2012 23:34:40 +0100Adding support for setting TargetPosition only if PositionSetPoint value from MCL is valid
laurent [Thu, 23 Feb 2012 23:34:40 +0100] rev 2036
Adding support for setting TargetPosition only if PositionSetPoint value from MCL is valid

Thu, 23 Feb 2012 15:48:19 +0100Fix bug with PowerFeedback value
laurent [Thu, 23 Feb 2012 15:48:19 +0100] rev 2035
Fix bug with PowerFeedback value

Wed, 22 Feb 2012 01:39:22 +0100Adding support for MCL
laurent [Wed, 22 Feb 2012 01:39:22 +0100] rev 2034
Adding support for MCL

Thu, 16 Feb 2012 18:40:13 +0100Added test directory
Edouard Tisserant [Thu, 16 Feb 2012 18:40:13 +0100] rev 2033
Added test directory

Wed, 15 Feb 2012 00:38:26 +0100Adding support for DS402 node subplugin (only simple state transition implemented)
laurent [Wed, 15 Feb 2012 00:38:26 +0100] rev 2032
Adding support for DS402 node subplugin (only simple state transition implemented)

Tue, 07 Feb 2012 19:45:45 +0100Fix some issues regarding arbitrary variable mapping
laurent [Tue, 07 Feb 2012 19:45:45 +0100] rev 2031
Fix some issues regarding arbitrary variable mapping

Wed, 01 Feb 2012 00:04:58 +0100Moving Add and Remove button to Plugin menu items
laurent [Wed, 01 Feb 2012 00:04:58 +0100] rev 2030
Moving Add and Remove button to Plugin menu items

Tue, 17 Jan 2012 17:24:53 +0100Adding support for displaying slave sync managers and profile object dictionary and for arbitrarily mapping variable through variable location
laurent [Tue, 17 Jan 2012 17:24:53 +0100] rev 2029
Adding support for displaying slave sync managers and profile object dictionary and for arbitrarily mapping variable through variable location

Tue, 10 Jan 2012 15:11:22 +0100Merge with Donggu modifications
laurent [Tue, 10 Jan 2012 15:11:22 +0100] rev 2028
Merge with Donggu modifications

Tue, 10 Jan 2012 15:10:08 +0100Merge with Donggu modifications
laurent [Tue, 10 Jan 2012 15:10:08 +0100] rev 2027
Merge with Donggu modifications

Sun, 08 Jan 2012 19:05:05 +0100Adding support for drag'n dropping located variables from topology panel to configurations and resources variable panel for declaring global located variables
laurent [Sun, 08 Jan 2012 19:05:05 +0100] rev 2026
Adding support for drag'n dropping located variables from topology panel to configurations and resources variable panel for declaring global located variables

Thu, 22 Dec 2011 14:52:18 +0900Master relase code added
Donggu Kang <dgkang@higenmotor.com> [Thu, 22 Dec 2011 14:52:18 +0900] rev 2025
Master relase code added

Thu, 22 Dec 2011 14:44:58 +0900Master release code added
Donggu Kang <dgkang@higenmotor.com> [Thu, 22 Dec 2011 14:44:58 +0900] rev 2024
Master release code added

Tue, 20 Dec 2011 23:43:27 +0100Adding support for not configuring pdos when not mandatory and not needed by locations defined in PLC program. Adding support for displaying locations tree in Topology panel and BrowseLocationsDialog. Merging pdos grid and variables grid into one single grid in slave infos panel.
laurent [Tue, 20 Dec 2011 23:43:27 +0100] rev 2023
Adding support for not configuring pdos when not mandatory and not needed by locations defined in PLC program. Adding support for displaying locations tree in Topology panel and BrowseLocationsDialog. Merging pdos grid and variables grid into one single grid in slave infos panel.

Sun, 18 Dec 2011 19:42:13 +0100First working implementation of Beremiz plugin for etherlab
laurent [Sun, 18 Dec 2011 19:42:13 +0100] rev 2022
First working implementation of Beremiz plugin for etherlab

Mon, 11 Jun 2018 08:34:15 +0200merge
Edouard Tisserant <edouard.tisserant@gmail.com> [Mon, 11 Jun 2018 08:34:15 +0200] rev 2021
merge

Fri, 08 Jun 2018 13:28:00 +0200Add BACnet extension from Mario de Sousa <msousa@fe.up.pt>
Edouard Tisserant [Fri, 08 Jun 2018 13:28:00 +0200] rev 2020
Add BACnet extension from Mario de Sousa <msousa@fe.up.pt>

Fri, 08 Jun 2018 09:43:48 +0200Make Modbus extension license compatible with the rest of Beremiz IDE python code : GPLv2.
Edouard Tisserant [Fri, 08 Jun 2018 09:43:48 +0200] rev 2019
Make Modbus extension license compatible with the rest of Beremiz IDE python code : GPLv2.

Mon, 04 Jun 2018 11:22:08 +0200Commented out safety check to prevent deadlock in wxEvaluator, since wx Mainloop is not anymore in main thread. That safety check actually leads to having wx code running outside of MainLoop
Edouard Tisserant [Mon, 04 Jun 2018 11:22:08 +0200] rev 2018
Commented out safety check to prevent deadlock in wxEvaluator, since wx Mainloop is not anymore in main thread. That safety check actually leads to having wx code running outside of MainLoop

Wed, 23 May 2018 20:22:45 +0200Merge
Edouard Tisserant <edouard.tisserant@gmail.com> [Wed, 23 May 2018 20:22:45 +0200] rev 2017
Merge

Wed, 23 May 2018 12:13:48 +0300Print version information about software used for tests
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 23 May 2018 12:13:48 +0300] rev 2016
Print version information about software used for tests

Wed, 23 May 2018 11:48:34 +0300Fix codestyle
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 23 May 2018 11:48:34 +0300] rev 2015
Fix codestyle

Wed, 23 May 2018 11:47:56 +0300Fix typos introduced by 9fa2f8e "Fixed random segfault happening when loading new PLC in runtime, when using Xenonai."
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 23 May 2018 11:47:56 +0300] rev 2014
Fix typos introduced by 9fa2f8e "Fixed random segfault happening when loading new PLC in runtime, when using Xenonai."

Tue, 22 May 2018 17:28:18 +0300merged changes in README.md
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 22 May 2018 17:28:18 +0300] rev 2013
merged changes in README.md

Mon, 12 Mar 2018 14:10:19 +0000add python-cycler dependence in readme
Sergey Surkov <surkovsv93@gmail.com> [Mon, 12 Mar 2018 14:10:19 +0000] rev 2012
add python-cycler dependence in readme

Wed, 23 May 2018 10:53:57 +0200Make Modbus mutexes non blocking for PLC. If data related to some modbus request is alredy locked when PLC wants to access it, then data isn't copied to/from PLC
Edouard Tisserant [Wed, 23 May 2018 10:53:57 +0200] rev 2011
Make Modbus mutexes non blocking for PLC. If data related to some modbus request is alredy locked when PLC wants to access it, then data isn't copied to/from PLC

Thu, 17 May 2018 09:33:58 +0200Merged #2476, URI dialog fixes
Edouard Tisserant [Thu, 17 May 2018 09:33:58 +0200] rev 2010
Merged #2476, URI dialog fixes

Thu, 17 May 2018 09:33:14 +0200close branch #2476 - URI dialog fixed #2476
Edouard Tisserant [Thu, 17 May 2018 09:33:14 +0200] rev 2009
close branch #2476 - URI dialog fixed

Mon, 14 May 2018 13:26:35 +0200#2476 Changes to the comment. #2476
dporopat <denis.poropat@smarteh.si> [Mon, 14 May 2018 13:26:35 +0200] rev 2008
#2476 Changes to the comment.

Thu, 10 May 2018 13:11:11 +0200#2476 Connectors dialog module added. #2476
dporopat <denis.poropat@smarteh.si> [Thu, 10 May 2018 13:11:11 +0200] rev 2007
#2476 Connectors dialog module added.

Wed, 09 May 2018 15:09:54 +0200#2476 Separate connectors dialogs from connectors module. #2476
dporopat <denis.poropat@smarteh.si> [Wed, 09 May 2018 15:09:54 +0200] rev 2006
#2476 Separate connectors dialogs from connectors module.

Wed, 09 May 2018 11:16:27 +0200#2476 Additional check added if we can import wx. #2476
dporopat <denis.poropat@smarteh.si> [Wed, 09 May 2018 11:16:27 +0200] rev 2005
#2476 Additional check added if we can import wx.

Thu, 10 May 2018 08:33:50 +0200Allow deleting configuration tree node with no corresponding directory in project tree
Edouard Tisserant [Thu, 10 May 2018 08:33:50 +0200] rev 2004
Allow deleting configuration tree node with no corresponding directory in project tree

Mon, 07 May 2018 15:10:39 +0200Support unicode in LDFLAGS returned by extensions
Edouard Tisserant [Mon, 07 May 2018 15:10:39 +0200] rev 2003
Support unicode in LDFLAGS returned by extensions

Mon, 07 May 2018 14:19:08 +0200Fixed typos
Edouard Tisserant [Mon, 07 May 2018 14:19:08 +0200] rev 2002
Fixed typos

Fri, 20 Apr 2018 11:21:20 +0200#2476 Added uri location editor, getting connectors from list in Beremiz. #2476
dporopat <denis.poropat@smarteh.si> [Fri, 20 Apr 2018 11:21:20 +0200] rev 2001
#2476 Added uri location editor, getting connectors from list in Beremiz.

Fri, 27 Apr 2018 16:32:53 +0200Fixed random segfault happening when loading new PLC in runtime, when using Xenonai.
Edouard Tisserant [Fri, 27 Apr 2018 16:32:53 +0200] rev 2000
Fixed random segfault happening when loading new PLC in runtime, when using Xenonai.

Thu, 19 Apr 2018 15:17:05 +0200PEP-8 and PyLint
Edouard Tisserant [Thu, 19 Apr 2018 15:17:05 +0200] rev 1999
PEP-8 and PyLint

Thu, 19 Apr 2018 15:03:23 +0200merged Denis change to apply input as we type in CTN configuration forms text fieds
Edouard Tisserant [Thu, 19 Apr 2018 15:03:23 +0200] rev 1998
merged Denis change to apply input as we type in CTN configuration forms text fieds

Thu, 19 Apr 2018 14:53:42 +0200PEP-8 and PyLint
Edouard Tisserant [Thu, 19 Apr 2018 14:53:42 +0200] rev 1997
PEP-8 and PyLint

Thu, 19 Apr 2018 13:09:41 +0200Add safety check to prevent exception when disconnecting while debugging
Edouard Tisserant [Thu, 19 Apr 2018 13:09:41 +0200] rev 1996
Add safety check to prevent exception when disconnecting while debugging

Thu, 19 Apr 2018 13:02:13 +0200Removed DebugThread. Take advantage of the fact that buffering is done in runtime. No need to poll for traces more than ten per second, then use simple wxTimer for that. Also removed Debug Lock since now everything happens in wx' mainloop.
Edouard Tisserant [Thu, 19 Apr 2018 13:02:13 +0200] rev 1995
Removed DebugThread. Take advantage of the fact that buffering is done in runtime. No need to poll for traces more than ten per second, then use simple wxTimer for that. Also removed Debug Lock since now everything happens in wx' mainloop.

Thu, 19 Apr 2018 12:22:40 +0200Rework of runtime non-real-time threading, and shared object dynamic loading :
Edouard Tisserant [Thu, 19 Apr 2018 12:22:40 +0200] rev 1994
Rework of runtime non-real-time threading, and shared object dynamic loading :
- All exposed operations on PLCObject are now serialized through main thread
(@RunInMain). Only one exception : python trace thread calling _GetDebugData
- Re-loading of same shared object is prevented. dlclose/delte/rewrite/dlopen
don't happen in that case. This is a workaround for some xenomai copperplate
bug triggering segfault, inbetween delete and rewrite.
- Trace thread now waits for data, dies if no data, and dies instead of
suspending as before when no data consumed after 3 seconds.
- Disabled threading in Pyro client
- Enforced auxiliary threads starting sequence : Pyro -> [UI] ->
PLCWorker.RunLoop

Tue, 17 Apr 2018 11:19:18 +0200Stripped forgotten debug code
Edouard Tisserant [Tue, 17 Apr 2018 11:19:18 +0200] rev 1993
Stripped forgotten debug code

Thu, 19 Apr 2018 15:06:10 +0200close branch #2476
Edouard Tisserant <edouard.tisserant@gmail.com> [Thu, 19 Apr 2018 15:06:10 +0200] rev 1992
close branch

Thu, 19 Apr 2018 09:50:00 +0200#2476 Fix for saving text in URI edit text box. No need to click out of URI edit text box to save edited text. #2476
dporopat <denis.poropat@smarteh.si> [Thu, 19 Apr 2018 09:50:00 +0200] rev 1991
#2476 Fix for saving text in URI edit text box. No need to click out of URI edit text box to save edited text.

Mon, 16 Apr 2018 16:11:18 +0200Fixed Xenomai 3 PLC stop freeze. Now use explicit finish command with pipes. Closing both ends of pipes doesn't abort blocking read anymore.
Edouard Tisserant [Mon, 16 Apr 2018 16:11:18 +0200] rev 1990
Fixed Xenomai 3 PLC stop freeze. Now use explicit finish command with pipes. Closing both ends of pipes doesn't abort blocking read anymore.

Mon, 16 Apr 2018 11:00:04 +0200More canonical test.
Edouard Tisserant [Mon, 16 Apr 2018 11:00:04 +0200] rev 1989
More canonical test.
There is an exception happening around here in some cases when connection is dropped while waiting for answer. Not sure that this fixes it but this is anyhow better.

Sat, 14 Apr 2018 10:09:33 +0200PLCObject got more methods serialized through worker : Start, Stop, NewPLC.
Edouard Tisserant [Sat, 14 Apr 2018 10:09:33 +0200] rev 1988
PLCObject got more methods serialized through worker : Start, Stop, NewPLC.
This particularly helps with initialization/startup/re-load problems
when targeting Xenomai. It should help in general for runtime robustness,
since those operations aren't meant to be executed concurrently.

Fri, 13 Apr 2018 00:29:52 +0200Fixed implementation of runtime worker that ensure that PLCObject Load and Unload methods always run main thread.
Edouard Tisserant <edouard.tisserant@gmail.com> [Fri, 13 Apr 2018 00:29:52 +0200] rev 1987
Fixed implementation of runtime worker that ensure that PLCObject Load and Unload methods always run main thread.

Thu, 12 Apr 2018 22:32:43 +0200merged
Edouard Tisserant <edouard.tisserant@gmail.com> [Thu, 12 Apr 2018 22:32:43 +0200] rev 1986
merged

Thu, 12 Apr 2018 22:32:12 +0200merged
Edouard Tisserant <edouard.tisserant@gmail.com> [Thu, 12 Apr 2018 22:32:12 +0200] rev 1985
merged

Thu, 12 Apr 2018 22:20:38 +0200Intermediate state while implementing runtime worker to ensure that PLCObject Load and Unload methods always run main thread.
Edouard Tisserant [Thu, 12 Apr 2018 22:20:38 +0200] rev 1984
Intermediate state while implementing runtime worker to ensure that PLCObject Load and Unload methods always run main thread.

Thu, 12 Apr 2018 16:38:09 +0200Stripped more dead code.
Edouard Tisserant [Thu, 12 Apr 2018 16:38:09 +0200] rev 1983
Stripped more dead code.

Thu, 12 Apr 2018 16:33:44 +0200Cleanup of some dead code in PYRO connector.
Edouard Tisserant [Thu, 12 Apr 2018 16:33:44 +0200] rev 1982
Cleanup of some dead code in PYRO connector.

Thu, 12 Apr 2018 16:31:30 +0200Added logging in Xenomai init phase.
Edouard Tisserant [Thu, 12 Apr 2018 16:31:30 +0200] rev 1981
Added logging in Xenomai init phase.

Thu, 12 Apr 2018 16:29:43 +0200Apply new RT Pipes API from Xenomai 3
Edouard Tisserant [Thu, 12 Apr 2018 16:29:43 +0200] rev 1980
Apply new RT Pipes API from Xenomai 3

Thu, 12 Apr 2018 16:27:22 +0200Removed useless try/except in Canfestival.py
Edouard Tisserant [Thu, 12 Apr 2018 16:27:22 +0200] rev 1979
Removed useless try/except in Canfestival.py

Tue, 10 Apr 2018 13:36:36 +0200#2579 On showing search result, text color of tree item is set to white. We need to change back color to show the result.
dporopat <denis.poropat@smarteh.si> [Tue, 10 Apr 2018 13:36:36 +0200] rev 1978
#2579 On showing search result, text color of tree item is set to white. We need to change back color to show the result.

Thu, 29 Mar 2018 23:33:36 +0200PEP-8...
Edouard Tisserant <edouard.tisserant@gmail.com> [Thu, 29 Mar 2018 23:33:36 +0200] rev 1977
PEP-8...

Thu, 29 Mar 2018 23:25:26 +0200Fixed bug that was creating many frames at starup on Windows
Edouard Tisserant <edouard.tisserant@gmail.com> [Thu, 29 Mar 2018 23:25:26 +0200] rev 1976
Fixed bug that was creating many frames at starup on Windows

Sun, 25 Mar 2018 16:22:36 +0200re-merge
Edouard Tisserant <edouard.tisserant@gmail.com> [Sun, 25 Mar 2018 16:22:36 +0200] rev 1975
re-merge

Mon, 19 Mar 2018 16:18:17 +0100Xenomai 3
Edouard Tisserant [Mon, 19 Mar 2018 16:18:17 +0100] rev 1974
Xenomai 3

Fri, 02 Mar 2018 17:01:25 +0100merged Sergeys changes
Edouard Tisserant <edouard.tisserant@gmail.com> [Fri, 02 Mar 2018 17:01:25 +0100] rev 1973
merged Sergeys changes

Mon, 19 Feb 2018 19:36:43 +0300fix bug with indelible values in some 'optional' fields in project properties panel
Surkov Sergey <surkovsv93@gmail.com> [Mon, 19 Feb 2018 19:36:43 +0300] rev 1972
fix bug with indelible values in some 'optional' fields in project properties panel

only 'required' fields should be indelible

Mon, 19 Feb 2018 19:10:07 +0300make the URI model compatible with https
Surkov Sergey <surkovsv93@gmail.com> [Mon, 19 Feb 2018 19:10:07 +0300] rev 1971
make the URI model compatible with https

Mon, 19 Feb 2018 19:02:25 +0300add address validation in Company URL field
Surkov Sergey <surkovsv93@gmail.com> [Mon, 19 Feb 2018 19:02:25 +0300] rev 1970
add address validation in Company URL field

Fri, 02 Feb 2018 17:16:04 +0300remove duplicating code for variables name generate
Surkov Sergey <surkovsv93@gmail.com> [Fri, 02 Feb 2018 17:16:04 +0300] rev 1969
remove duplicating code for variables name generate

Wed, 31 Jan 2018 16:31:01 +0300add fields autocomplete when adding task or instance in resources
Surkov Sergey <surkovsv93@gmail.com> [Wed, 31 Jan 2018 16:31:01 +0300] rev 1968
add fields autocomplete when adding task or instance in resources

values will be copied from previous row, first row fills with the default values

Thu, 18 Jan 2018 14:24:44 +0300fix search in TextViewer objects, search returns only first entry
Surkov Sergey <surkovsv93@gmail.com> [Thu, 18 Jan 2018 14:24:44 +0300] rev 1967
fix search in TextViewer objects, search returns only first entry

side effect of a63bb40

Thu, 18 Jan 2018 14:03:29 +0300fix import order according to PEP8
Surkov Sergey <surkovsv93@gmail.com> [Thu, 18 Jan 2018 14:03:29 +0300] rev 1966
fix import order according to PEP8

Mon, 15 Jan 2018 12:06:24 +0300fix default time range choice for debug variable panel
Surkov Sergey <surkovsv93@gmail.com> [Mon, 15 Jan 2018 12:06:24 +0300] rev 1965
fix default time range choice for debug variable panel

only localized versions were affected

Fri, 12 Jan 2018 18:36:02 +0300enlarge canvas border for debug variable graphic viewer
Surkov Sergey <surkovsv93@gmail.com> [Fri, 12 Jan 2018 18:36:02 +0300] rev 1964
enlarge canvas border for debug variable graphic viewer

Fri, 12 Jan 2018 18:33:54 +0300fix rounding milliseconds from nanoseconds
Surkov Sergey <surkovsv93@gmail.com> [Fri, 12 Jan 2018 18:33:54 +0300] rev 1963
fix rounding milliseconds from nanoseconds

example:rounding 299999 ns to 300ms, if division result is an
integer, remainder will be lost, and result will be 299.

Fri, 12 Jan 2018 17:56:48 +0300fix display TIME type variables in debug variable panel
Surkov Sergey <surkovsv93@gmail.com> [Fri, 12 Jan 2018 17:56:48 +0300] rev 1962
fix display TIME type variables in debug variable panel

Thu, 01 Mar 2018 14:28:55 +0100fix for test app from skv. thanks
Edouard Tisserant <edouard.tisserant@gmail.com> [Thu, 01 Mar 2018 14:28:55 +0100] rev 1961
fix for test app from skv. thanks

Thu, 01 Mar 2018 10:28:17 +0100Prevent catching exception if exception handling was not enabled (or disabled by test test app).
Edouard Tisserant <edouard.tisserant@gmail.com> [Thu, 01 Mar 2018 10:28:17 +0100] rev 1960
Prevent catching exception if exception handling was not enabled (or disabled by test test app).

Thu, 01 Mar 2018 09:41:12 +0100pep8 and pylint hate me
Edouard Tisserant <edouard.tisserant@gmail.com> [Thu, 01 Mar 2018 09:41:12 +0100] rev 1959
pep8 and pylint hate me

Wed, 28 Feb 2018 16:10:05 +0100Fixed typo introduced in 5736d25bb393
Edouard Tisserant [Wed, 28 Feb 2018 16:10:05 +0100] rev 1958
Fixed typo introduced in 5736d25bb393

Fri, 23 Feb 2018 11:16:25 +0100GetEditedElementInstancesInfos now optimized as well. Forgotten because not using [R.I.P]LibraryResolver, but still XSLT compiling was hapenning on each call.
Edouard Tisserant [Fri, 23 Feb 2018 11:16:25 +0100] rev 1957
GetEditedElementInstancesInfos now optimized as well. Forgotten because not using [R.I.P]LibraryResolver, but still XSLT compiling was hapenning on each call.

Tue, 20 Feb 2018 15:09:01 +0100Another attempt to make BitBuket's version of pylint happy.
Edouard Tisserant [Tue, 20 Feb 2018 15:09:01 +0100] rev 1956
Another attempt to make BitBuket's version of pylint happy.

Tue, 20 Feb 2018 14:46:12 +0100Attempt to make BitBuket's version of pep8 and pylint happy.
Edouard Tisserant [Tue, 20 Feb 2018 14:46:12 +0100] rev 1955
Attempt to make BitBuket's version of pep8 and pylint happy.

Tue, 20 Feb 2018 14:24:30 +0100Removed dead slow code
Edouard Tisserant [Tue, 20 Feb 2018 14:24:30 +0100] rev 1954
Removed dead slow code

Tue, 20 Feb 2018 14:16:51 +0100PEP8 and PyLint conformance: whitespaces and stuff
Edouard Tisserant [Tue, 20 Feb 2018 14:16:51 +0100] rev 1953
PEP8 and PyLint conformance: whitespaces and stuff

Tue, 20 Feb 2018 11:24:40 +0100Copy pasted, no time wasted !
Edouard Tisserant [Tue, 20 Feb 2018 11:24:40 +0100] rev 1952
Copy pasted, no time wasted !

Tue, 20 Feb 2018 11:24:10 +0100GetVariableDictionary and GetPouInterfaceReturnType optimized with new VariableInfoCollector based on XSLTModelQuery. Moved corresponding definitions out of PLCControler.py.
Edouard Tisserant [Tue, 20 Feb 2018 11:24:10 +0100] rev 1951
GetVariableDictionary and GetPouInterfaceReturnType optimized with new VariableInfoCollector based on XSLTModelQuery. Moved corresponding definitions out of PLCControler.py.

Mon, 19 Feb 2018 15:46:50 +0100GetPouInstanceTagName optimized with XSLTModelQuery.
Edouard Tisserant [Mon, 19 Feb 2018 15:46:50 +0100] rev 1950
GetPouInstanceTagName optimized with XSLTModelQuery.

Mon, 19 Feb 2018 15:15:36 +0100Better writing of some xpath added in previous commits about XSLT optimization.
Edouard Tisserant [Mon, 19 Feb 2018 15:15:36 +0100] rev 1949
Better writing of some xpath added in previous commits about XSLT optimization.

Mon, 19 Feb 2018 15:14:30 +0100Moved some definitions away from controller class, and adaped references them through all code.
Edouard Tisserant [Mon, 19 Feb 2018 15:14:30 +0100] rev 1948
Moved some definitions away from controller class, and adaped references them through all code.

Mon, 19 Feb 2018 13:24:57 +0100Hook Beremiz Launcher AppStart to AdvancedSplash OnPaint event in order to ensure image is beeing displayed before loading.
Edouard Tisserant [Mon, 19 Feb 2018 13:24:57 +0100] rev 1947
Hook Beremiz Launcher AppStart to AdvancedSplash OnPaint event in order to ensure image is beeing displayed before loading.

Sun, 18 Feb 2018 22:29:35 +0100Avoid endline escaping in multiline xpath epressions in xslt. '&#10;' Is apparently ignored but never know...
Edouard Tisserant <edouard.tisserant@gmail.com> [Sun, 18 Feb 2018 22:29:35 +0100] rev 1946
Avoid endline escaping in multiline xpath epressions in xslt. '&#10;' Is apparently ignored but never know...

Sun, 18 Feb 2018 21:51:33 +0100Fixed earlier XSLT optimizations. Some/most results were missing.
Edouard Tisserant <edouard.tisserant@gmail.com> [Sun, 18 Feb 2018 21:51:33 +0100] rev 1945
Fixed earlier XSLT optimizations. Some/most results were missing.

Sun, 18 Feb 2018 21:30:48 +0100Moved some code from PLCController.py to other modules. Added necessary imports.
Edouard Tisserant <edouard.tisserant@gmail.com> [Sun, 18 Feb 2018 21:30:48 +0100] rev 1944
Moved some code from PLCController.py to other modules. Added necessary imports.

Sat, 17 Feb 2018 23:58:47 +0100GetPouVariables optimized with XSLTModelQuery
Edouard Tisserant <edouard.tisserant@gmail.com> [Sat, 17 Feb 2018 23:58:47 +0100] rev 1943
GetPouVariables optimized with XSLTModelQuery

Sat, 17 Feb 2018 16:42:56 +0100Added /plcopen/InstancesPathCollector.py, to move more model xslt querying code away from PLCController.py.
Edouard Tisserant <edouard.tisserant@gmail.com> [Sat, 17 Feb 2018 16:42:56 +0100] rev 1942
Added /plcopen/InstancesPathCollector.py, to move more model xslt querying code away from PLCController.py.

Fri, 16 Feb 2018 18:38:30 +0100Fixed Exception dialog disapearing after a view second when exception occurs during app startup.
Edouard Tisserant <edouard.tisserant@gmail.com> [Fri, 16 Feb 2018 18:38:30 +0100] rev 1941
Fixed Exception dialog disapearing after a view second when exception occurs during app startup.
Problem was caused by splashscreen timeout, wx closing averything else if there is no more main frame.
Changes:
- no more timeout for splashscreen
- use wx.App OnInit method to give first operation to mainloop, object are then now created in mainloop
- main loop is then created _before_ showing splash screen
- no more wxyield or wx processevent tricks needed to display splash screen
- exception handler not blocking anymore on dialog (callafter)
- because of mainloop being there before everything, exit must be called explicitely if exception caught during startup -> exit parameter in handle_exception + try/except around startup calls

UNTESTED ON WINDOWS

Fri, 16 Feb 2018 18:24:55 +0100Moved XSLTModelQuery class to own module in plcopen package.
Edouard Tisserant <edouard.tisserant@gmail.com> [Fri, 16 Feb 2018 18:24:55 +0100] rev 1940
Moved XSLTModelQuery class to own module in plcopen package.

Fri, 16 Feb 2018 13:00:06 +0100Added a class to speedup all XSLT queries. WIP, now only for instances_path.xslt / GetInstanceList()
Edouard Tisserant <edouard.tisserant@gmail.com> [Fri, 16 Feb 2018 13:00:06 +0100] rev 1939
Added a class to speedup all XSLT queries. WIP, now only for instances_path.xslt / GetInstanceList()

Fri, 16 Feb 2018 03:24:11 +0100Stripped useless node creation in instances_path stylesheet.
Edouard Tisserant <edouard.tisserant@gmail.com> [Fri, 16 Feb 2018 03:24:11 +0100] rev 1938
Stripped useless node creation in instances_path stylesheet.

Fri, 16 Feb 2018 02:29:10 +0100This should really help GetInstanceList to perform better: resolver removed, no more deepcopy, no more useless xml serialization, no more node-set() calls.
Edouard Tisserant <edouard.tisserant@gmail.com> [Fri, 16 Feb 2018 02:29:10 +0100] rev 1937
This should really help GetInstanceList to perform better: resolver removed, no more deepcopy, no more useless xml serialization, no more node-set() calls.

Fri, 16 Feb 2018 01:48:48 +0100YSLT auto indent trick is useless here, added yslt_noindent.yml2, regenerated XSLT files
Edouard Tisserant <edouard.tisserant@gmail.com> [Fri, 16 Feb 2018 01:48:48 +0100] rev 1936
YSLT auto indent trick is useless here, added yslt_noindent.yml2, regenerated XSLT files

Fri, 16 Feb 2018 01:38:34 +0100Prevent compiling XSLT on each call of GetInstanceList. To be continued. More optimization needed here. 100x would be fine...
Edouard Tisserant [Fri, 16 Feb 2018 01:38:34 +0100] rev 1935
Prevent compiling XSLT on each call of GetInstanceList. To be continued. More optimization needed here. 100x would be fine...

Wed, 14 Feb 2018 15:39:27 +0100Changed meaning of -c commandline argument for Beremiz service : only gives DEFAULT wamp config.
Edouard Tisserant [Wed, 14 Feb 2018 15:39:27 +0100] rev 1934
Changed meaning of -c commandline argument for Beremiz service : only gives DEFAULT wamp config.
If existing project already has a wamp config, it is taken instead.

Wed, 14 Feb 2018 14:50:10 +0100Factorized duplicated code
Edouard Tisserant [Wed, 14 Feb 2018 14:50:10 +0100] rev 1933
Factorized duplicated code

Wed, 14 Feb 2018 14:48:40 +0100Better variable naming, and small optimization.
Edouard Tisserant [Wed, 14 Feb 2018 14:48:40 +0100] rev 1932
Better variable naming, and small optimization.

Tue, 13 Feb 2018 14:01:20 +0100Unclutter graphics package scope.
Edouard Tisserant [Tue, 13 Feb 2018 14:01:20 +0100] rev 1931
Unclutter graphics package scope.
Moved some import statements from "graphics" package to "viewer" module.
It also avoid systematic import of everything in graphics when we only need one submodule.

Tue, 13 Feb 2018 13:57:53 +0100Removed dead code
Edouard Tisserant [Tue, 13 Feb 2018 13:57:53 +0100] rev 1930
Removed dead code

Mon, 12 Feb 2018 13:18:53 +0100Fixed pyro timeout for runtime, was set too short and runtime was disconnecting when building PLC
Edouard Tisserant [Mon, 12 Feb 2018 13:18:53 +0100] rev 1929
Fixed pyro timeout for runtime, was set too short and runtime was disconnecting when building PLC

Mon, 12 Feb 2018 11:34:07 +0100Ask to stop PLC before transfer if it is running
Edouard Tisserant [Mon, 12 Feb 2018 11:34:07 +0100] rev 1928
Ask to stop PLC before transfer if it is running

Mon, 12 Feb 2018 11:32:48 +0100Factorized some repeated refresh code into a method, to allow customisation.
Edouard Tisserant [Mon, 12 Feb 2018 11:32:48 +0100] rev 1927
Factorized some repeated refresh code into a method, to allow customisation.

Mon, 05 Feb 2018 16:23:51 +0100Launcher : add a debug attribute, instead of BMZ_DBG, so that customization can use it.
Edouard Tisserant [Mon, 05 Feb 2018 16:23:51 +0100] rev 1926
Launcher : add a debug attribute, instead of BMZ_DBG, so that customization can use it.

Fri, 02 Feb 2018 16:25:32 +0100Stripped old dead code.
Edouard Tisserant [Fri, 02 Feb 2018 16:25:32 +0100] rev 1925
Stripped old dead code.

Fri, 02 Feb 2018 16:24:56 +0100More changes in Launcher. Modules to be loaded in the background are given in a list, and assigned as object attributes. Also splitted CreateUI into CloseSplashScreen and CreatueUI.
Edouard Tisserant [Fri, 02 Feb 2018 16:24:56 +0100] rev 1924
More changes in Launcher. Modules to be loaded in the background are given in a list, and assigned as object attributes. Also splitted CreateUI into CloseSplashScreen and CreatueUI.

Fri, 02 Feb 2018 16:22:25 +0100ClassImporter now accepts string, callable or class, for compatibility with some old extensions.
Edouard Tisserant [Fri, 02 Feb 2018 16:22:25 +0100] rev 1923
ClassImporter now accepts string, callable or class, for compatibility with some old extensions.

Fri, 02 Feb 2018 11:12:03 +0100Launcher: ShowUI call moves from preStart to start. ShowUI() split into CreateUI() and ShowUI(). Start()'s arguments are passed to CreateUI()
Edouard Tisserant [Fri, 02 Feb 2018 11:12:03 +0100] rev 1922
Launcher: ShowUI call moves from preStart to start. ShowUI() split into CreateUI() and ShowUI(). Start()'s arguments are passed to CreateUI()
This is meant to allow customizations to pass own pre-instanciated controller to UI at startup.

Fri, 02 Feb 2018 11:07:39 +0100Launcher: allows customizations to specify what globals passed to extensions
Edouard Tisserant [Fri, 02 Feb 2018 11:07:39 +0100] rev 1921
Launcher: allows customizations to specify what globals passed to extensions

Fri, 02 Feb 2018 11:06:41 +0100Documentation
Edouard Tisserant [Fri, 02 Feb 2018 11:06:41 +0100] rev 1920
Documentation

Thu, 01 Feb 2018 14:51:18 +0100Another set of meaningless changes to satisfy PEP8 and PyLint.
Edouard Tisserant [Thu, 01 Feb 2018 14:51:18 +0100] rev 1919
Another set of meaningless changes to satisfy PEP8 and PyLint.

Wed, 31 Jan 2018 15:25:30 +0100PEP8 conformity for modbus. Most of it done by autopep8, plus some easy refactoring.
Edouard Tisserant [Wed, 31 Jan 2018 15:25:30 +0100] rev 1918
PEP8 conformity for modbus. Most of it done by autopep8, plus some easy refactoring.

Wed, 31 Jan 2018 15:22:43 +0100Add some class factory function to ease declaration of simple POU libraries in customizations (i.e. TC6 XML file only, no special C code generation)
Edouard Tisserant [Wed, 31 Jan 2018 15:22:43 +0100] rev 1917
Add some class factory function to ease declaration of simple POU libraries in customizations (i.e. TC6 XML file only, no special C code generation)

Wed, 31 Jan 2018 15:20:42 +0100Small pep8 conformity enforcement.
Edouard Tisserant [Wed, 31 Jan 2018 15:20:42 +0100] rev 1916
Small pep8 conformity enforcement.

Wed, 31 Jan 2018 11:29:17 +0100Better have globals passed to python extensions (-e) than locals.
Edouard Tisserant [Wed, 31 Jan 2018 11:29:17 +0100] rev 1915
Better have globals passed to python extensions (-e) than locals.

Wed, 31 Jan 2018 11:21:08 +0100launcher : move call to ShowSplashScreen and BackgroundInitialization to PreStart()
Edouard Tisserant [Wed, 31 Jan 2018 11:21:08 +0100] rev 1914
launcher : move call to ShowSplashScreen and BackgroundInitialization to PreStart()
It doesn't change behaviour of launcher in beremiz, but may have some impact on some customizations.
Some customizations need to squeeze some bitmap folder init in between app creation and ShowSplashScreen

Tue, 30 Jan 2018 16:23:50 +0100modbus extension code cleanup, from smarteh's patch
Edouard Tisserant [Tue, 30 Jan 2018 16:23:50 +0100] rev 1913
modbus extension code cleanup, from smarteh's patch

Tue, 30 Jan 2018 16:06:58 +0100Merged Mario's modbus branch. Fixed line endings.
Edouard Tisserant [Tue, 30 Jan 2018 16:06:58 +0100] rev 1912
Merged Mario's modbus branch. Fixed line endings.

Fri, 24 Mar 2017 12:07:47 +0000merge
Mario de Sousa <msousa@fe.up.pt> [Fri, 24 Mar 2017 12:07:47 +0000] rev 1911
merge

Sun, 05 Mar 2017 00:38:25 +0000Ignore bug report files.
Mario de Sousa <msousa@fe.up.pt> [Sun, 05 Mar 2017 00:38:25 +0000] rev 1910
Ignore bug report files.

Sun, 05 Mar 2017 00:37:54 +0000Add support for Modbus (TCP and RTU) working as master & slave
Mario de Sousa <msousa@fe.up.pt> [Sun, 05 Mar 2017 00:37:54 +0000] rev 1909
Add support for Modbus (TCP and RTU) working as master & slave

Mon, 29 Jan 2018 13:31:14 +0100merge
Edouard Tisserant <edouard.tisserant@gmail.com> [Mon, 29 Jan 2018 13:31:14 +0100] rev 1908
merge

Wed, 24 Jan 2018 16:12:49 +0100fixed erro introduced 2 commits ago (-e) : tuples have no reverse() method
Edouard Tisserant [Wed, 24 Jan 2018 16:12:49 +0100] rev 1907
fixed erro introduced 2 commits ago (-e) : tuples have no reverse() method

Wed, 24 Jan 2018 15:44:36 +0100Trying to get better logging/display of exceptions at runtime's startup
Edouard Tisserant [Wed, 24 Jan 2018 15:44:36 +0100] rev 1906
Trying to get better logging/display of exceptions at runtime's startup

Wed, 24 Jan 2018 14:48:49 +0100Changed way to deal with extensions arguments (-e) so that path and filename are stored independently and accessible for extensions themselves.
Edouard Tisserant [Wed, 24 Jan 2018 14:48:49 +0100] rev 1905
Changed way to deal with extensions arguments (-e) so that path and filename are stored independently and accessible for extensions themselves.

Mon, 29 Jan 2018 12:56:49 +0100Textviewer : moved call to Colourise in a better place, so that ST highlighting gets also updated when typing in some case, not only IL
Edouard Tisserant <edouard.tisserant@gmail.com> [Mon, 29 Jan 2018 12:56:49 +0100] rev 1904
Textviewer : moved call to Colourise in a better place, so that ST highlighting gets also updated when typing in some case, not only IL

Fri, 19 Jan 2018 15:12:23 +0100Main runtime template C code : Added HAVE_RETAIN preprocessor definition for customized build to signal it provides IEC-61131 Retain memory handling function. Removed targets/Xenomai/plc_Xenomai_noretain.c, now useless.
Edouard Tisserant [Fri, 19 Jan 2018 15:12:23 +0100] rev 1903
Main runtime template C code : Added HAVE_RETAIN preprocessor definition for customized build to signal it provides IEC-61131 Retain memory handling function. Removed targets/Xenomai/plc_Xenomai_noretain.c, now useless.

Mon, 15 Jan 2018 14:43:53 +0100Clarify licensing, and packaging of runtime only files :
Edouard Tisserant [Mon, 15 Jan 2018 14:43:53 +0100] rev 1902
Clarify licensing, and packaging of runtime only files :
- moved and split targets/typemapping.py into runtime/typemapping.py and runtime/loglevels.py
- added runtime_files.list pointing to files necessary for runtime, and referring to runtime license

Thu, 11 Jan 2018 15:41:20 +0100Enforced check_source.sh pep8 and pylint rules.
Edouard Tisserant [Thu, 11 Jan 2018 15:41:20 +0100] rev 1901
Enforced check_source.sh pep8 and pylint rules.

Thu, 11 Jan 2018 15:39:58 +0100runtime/WAMP: Fixed secret loading into configuration. Fixed secret commandline switch handling.
Edouard Tisserant [Thu, 11 Jan 2018 15:39:58 +0100] rev 1900
runtime/WAMP: Fixed secret loading into configuration. Fixed secret commandline switch handling.

Thu, 11 Jan 2018 13:02:09 +0100runtime/WAMP : was 'Added time print on session left.' from dporopat. Purpose is to log (dis/re)connection, to help debugging connection problem
Edouard Tisserant [Thu, 11 Jan 2018 13:02:09 +0100] rev 1899
runtime/WAMP : was 'Added time print on session left.' from dporopat. Purpose is to log (dis/re)connection, to help debugging connection problem

Thu, 11 Jan 2018 12:48:49 +0100runtime/Wamp : adapt to unicode being enforced in latest crossbar API. Updated some documentation, to explain why there is unused definitions like SubscribedEvents or DoOnJoin.
Edouard Tisserant [Thu, 11 Jan 2018 12:48:49 +0100] rev 1898
runtime/Wamp : adapt to unicode being enforced in latest crossbar API. Updated some documentation, to explain why there is unused definitions like SubscribedEvents or DoOnJoin.

Wed, 10 Jan 2018 15:36:03 +0100Extend python<->PLC global variable description "GlobalDesc" to support Initial value setting.
Edouard Tisserant [Wed, 10 Jan 2018 15:36:03 +0100] rev 1897
Extend python<->PLC global variable description "GlobalDesc" to support Initial value setting.

Rebased from dporopat change "add initial value to runtime.py file", which means :
- GlobalDesc is used by some customized beremiz python runtime
- Those runtimes need to know what is initial value of these special variables

Wed, 10 Jan 2018 14:35:04 +0100update tests/wamp README file, based on changes from dporopat.
Edouard Tisserant [Wed, 10 Jan 2018 14:35:04 +0100] rev 1896
update tests/wamp README file, based on changes from dporopat.

Wed, 10 Jan 2018 13:23:40 +0100Fixed WAMP test (crossbar confile upgrade and use same ID on both PLC and IDE side)
Edouard Tisserant [Wed, 10 Jan 2018 13:23:40 +0100] rev 1895
Fixed WAMP test (crossbar confile upgrade and use same ID on both PLC and IDE side)

Wed, 10 Jan 2018 13:21:42 +0100Fixed changes from dporopat and agregorcic about WAMP CRA and config.
Edouard Tisserant [Wed, 10 Jan 2018 13:21:42 +0100] rev 1894
Fixed changes from dporopat and agregorcic about WAMP CRA and config.

Tue, 09 Jan 2018 15:08:08 +0100WAMP runtime : changes from dporopat and agregorcic, adding CRA (-s) and changed way to load WAMP conf (-c)
Edouard Tisserant [Tue, 09 Jan 2018 15:08:08 +0100] rev 1893
WAMP runtime : changes from dporopat and agregorcic, adding CRA (-s) and changed way to load WAMP conf (-c)
- added Challenge Response Authentication,
- use -s commandline switch to give the shared secret.
- WAMP configuration now either given as -c commandline switch
or taken as default wampconf.json in project files.

Tue, 09 Jan 2018 14:52:56 +0100Set WAMP registration option so that reconnecting while earlier session still didn't timeout is possible (in case of connection lost, for example).
Edouard Tisserant [Tue, 09 Jan 2018 14:52:56 +0100] rev 1892
Set WAMP registration option so that reconnecting while earlier session still didn't timeout is possible (in case of connection lost, for example).

Tue, 09 Jan 2018 14:50:41 +0100More canonical overload of ReconnectingClientFactory (according twisted doc)
Edouard Tisserant [Tue, 09 Jan 2018 14:50:41 +0100] rev 1891
More canonical overload of ReconnectingClientFactory (according twisted doc)

Tue, 09 Jan 2018 14:42:23 +0100non significant print syntax change. ready for py3.
Edouard Tisserant [Tue, 09 Jan 2018 14:42:23 +0100] rev 1890
non significant print syntax change. ready for py3.

Tue, 09 Jan 2018 14:38:45 +0100whitespace cosmetic for pep8
Edouard Tisserant [Tue, 09 Jan 2018 14:38:45 +0100] rev 1889
whitespace cosmetic for pep8

Mon, 08 Jan 2018 11:09:02 +0100Added arbitrary timeout on Pyro, to force it to free memory after disconnect.
Edouard Tisserant [Mon, 08 Jan 2018 11:09:02 +0100] rev 1888
Added arbitrary timeout on Pyro, to force it to free memory after disconnect.

Fri, 05 Jan 2018 15:39:02 +0100Moved code from to Beremiz_service.py Server class Start method to Loop method to allow customisation by hot patching. Also renamed Stop method as _stop and use Restart instead of Stop from everywhere else to make it clear that _stop actually does restart...
Edouard Tisserant [Fri, 05 Jan 2018 15:39:02 +0100] rev 1887
Moved code from to Beremiz_service.py Server class Start method to Loop method to allow customisation by hot patching. Also renamed Stop method as _stop and use Restart instead of Stop from everywhere else to make it clear that _stop actually does restart...

Thu, 04 Jan 2018 16:00:35 +0100enforce PEP8 in previous commit
Edouard Tisserant [Thu, 04 Jan 2018 16:00:35 +0100] rev 1886
enforce PEP8 in previous commit

Fri, 20 Jan 2017 13:22:31 +0100replaced normal panel with scrolled panel under project properties
dporopat <denis.poropat@smarteh.si> [Fri, 20 Jan 2017 13:22:31 +0100] rev 1885
replaced normal panel with scrolled panel under project properties

Tue, 05 Dec 2017 12:38:04 +0300fix missing root in empty search results panel
Surkov Sergey <surkovsv93@gmail.com> [Tue, 05 Dec 2017 12:38:04 +0300] rev 1884
fix missing root in empty search results panel

Mon, 04 Dec 2017 19:35:31 +0300add possibility to specify subprocess stdout encoding
Surkov Sergey <surkovsv93@gmail.com> [Mon, 04 Dec 2017 19:35:31 +0300] rev 1883
add possibility to specify subprocess stdout encoding

Mon, 04 Dec 2017 11:20:46 +0300fix deadlock if method kill() is called after process is already finished
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 04 Dec 2017 11:20:46 +0300] rev 1882
fix deadlock if method kill() is called after process is already finished

Wed, 25 Oct 2017 13:50:26 +0300fix pylint py3k conversion warning: "(no-absolute-import) import missing `from __future__ import absolute_import`"
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 25 Oct 2017 13:50:26 +0300] rev 1881
fix pylint py3k conversion warning: "(no-absolute-import) import missing `from __future__ import absolute_import`"

Mon, 23 Oct 2017 18:25:45 +0300make CanFestival to be at the expected place in bitbucket pipelines container
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 23 Oct 2017 18:25:45 +0300] rev 1880
make CanFestival to be at the expected place in bitbucket pipelines container

Thu, 19 Oct 2017 13:33:01 +0300fix pylint error '(unsubscriptable-object) Value 'X' is unsubscriptable'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 19 Oct 2017 13:33:01 +0300] rev 1879
fix pylint error '(unsubscriptable-object) Value 'X' is unsubscriptable'

Thu, 19 Oct 2017 11:03:03 +0300fix pylint warning '(bad-continuation) Wrong hanging indentation before block'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 19 Oct 2017 11:03:03 +0300] rev 1878
fix pylint warning '(bad-continuation) Wrong hanging indentation before block'

Thu, 19 Oct 2017 10:57:35 +0300force all python source code to have LF line ending
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 19 Oct 2017 10:57:35 +0300] rev 1877
force all python source code to have LF line ending

Wed, 18 Oct 2017 12:23:19 +0300fix pylint warning '(expression-not-assigned) Expression "X" is assigned to nothing'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 18 Oct 2017 12:23:19 +0300] rev 1876
fix pylint warning '(expression-not-assigned) Expression "X" is assigned to nothing'

Tue, 17 Oct 2017 11:29:20 +0300fix pylint warning '(redefine-in-handler) Redefining name 'X' from outer scope (line Y) in exception handler'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 17 Oct 2017 11:29:20 +0300] rev 1875
fix pylint warning '(redefine-in-handler) Redefining name 'X' from outer scope (line Y) in exception handler'

Tue, 17 Oct 2017 11:09:01 +0300fix displaying result of update check during Beremiz startup
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 17 Oct 2017 11:09:01 +0300] rev 1874
fix displaying result of update check during Beremiz startup

Tue, 17 Oct 2017 09:51:43 +0300fix pylint warning '(no-init) Class has no __init__ method'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 17 Oct 2017 09:51:43 +0300] rev 1873
fix pylint warning '(no-init) Class has no __init__ method'

Mon, 16 Oct 2017 17:20:31 +0300fix pylint error "(undefined-variable) Undefined variable 'X'"
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 16 Oct 2017 17:20:31 +0300] rev 1872
fix pylint error "(undefined-variable) Undefined variable 'X'"

Fri, 13 Oct 2017 13:17:42 +0300fix problem happend when tests are running under python-coverage
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 13 Oct 2017 13:17:42 +0300] rev 1871
fix problem happend when tests are running under python-coverage

$ python-coverage run ./tests/tools/test_application.py

Exception while connecting LOCAL://!
Traceback (most recent call last):
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 1753, in _Connect
self._SetConnector(connectors.ConnectorFactory(uri, self)
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 1702, in _SetConnector
if connector is not None:
PyAssertionError: C++ assertion "m_window" failed at ../src/gtk/dcclient.cpp(2043) in DoGetSize(): GetSize() doesn't work without window

Thu, 12 Oct 2017 16:18:05 +0300fix pylint error '(too-many-function-args) Too many positional arguments for function call'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 12 Oct 2017 16:18:05 +0300] rev 1870
fix pylint error '(too-many-function-args) Too many positional arguments for function call'

Wed, 11 Oct 2017 13:55:56 +0300fix pylint error '(import-error) Unable to import X'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 11 Oct 2017 13:55:56 +0300] rev 1869
fix pylint error '(import-error) Unable to import X'

Wed, 11 Oct 2017 13:15:21 +0300fix pylint error '(no-self-argument) Method should have "self" as first argument'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 11 Oct 2017 13:15:21 +0300] rev 1868
fix pylint error '(no-self-argument) Method should have "self" as first argument'

Wed, 11 Oct 2017 11:54:55 +0300fix pylint error "(no-name-in-module) No name 'X' in module 'Y'"
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 11 Oct 2017 11:54:55 +0300] rev 1867
fix pylint error "(no-name-in-module) No name 'X' in module 'Y'"

Wed, 11 Oct 2017 11:41:32 +0300fix pylint error '(bad-except-order) Bad except clauses order (X is an ancestor class of Y)'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 11 Oct 2017 11:41:32 +0300] rev 1866
fix pylint error '(bad-except-order) Bad except clauses order (X is an ancestor class of Y)'

Wed, 11 Oct 2017 11:35:19 +0300fix pylint warning "(no-value-for-parameter) No value for argument 'X' in function call"
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 11 Oct 2017 11:35:19 +0300] rev 1865
fix pylint warning "(no-value-for-parameter) No value for argument 'X' in function call"

Wed, 11 Oct 2017 10:34:45 +0300fix problems with unconnected input of InOut function variables and
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 11 Oct 2017 10:34:45 +0300] rev 1864
fix problems with unconnected input of InOut function variables and
enfoce InOut variables to be connected for functions and function blocks

Tue, 10 Oct 2017 16:38:57 +0300fix error for functions with VAR_IN_OUT
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 10 Oct 2017 16:38:57 +0300] rev 1863
fix error for functions with VAR_IN_OUT

The problem was found by pylint '(used-before-assignment) Using variable "X" before assignment'

Tue, 10 Oct 2017 14:01:46 +0300fix pylint warning '(unidiomatic-typecheck) Using type() instead of isinstance() for a typecheck'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 10 Oct 2017 14:01:46 +0300] rev 1862
fix pylint warning '(unidiomatic-typecheck) Using type() instead of isinstance() for a typecheck'

Tue, 10 Oct 2017 13:49:13 +0300fix pylint warning '(misplaced-bare-raise) The raise statement is not inside an except clause'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 10 Oct 2017 13:49:13 +0300] rev 1861
fix pylint warning '(misplaced-bare-raise) The raise statement is not inside an except clause'

Tue, 10 Oct 2017 13:43:55 +0300fix format string argument error found by pylint '(too-many-format-args) Too many arguments for format string'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 10 Oct 2017 13:43:55 +0300] rev 1860
fix format string argument error found by pylint '(too-many-format-args) Too many arguments for format string'

Tue, 10 Oct 2017 13:33:46 +0300fix pylint warning '(wrong-import-position) Import "import X" should be placed at the top of the module'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 10 Oct 2017 13:33:46 +0300] rev 1859
fix pylint warning '(wrong-import-position) Import "import X" should be placed at the top of the module'

Tue, 10 Oct 2017 13:21:48 +0300fix pylint warning '(import-self) Module import itself'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 10 Oct 2017 13:21:48 +0300] rev 1858
fix pylint warning '(import-self) Module import itself'

Tue, 10 Oct 2017 12:50:10 +0300remove old code useless code found by pylint "(unnecessary-pass) Unnecessary pass statement"
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 10 Oct 2017 12:50:10 +0300] rev 1857
remove old code useless code found by pylint "(unnecessary-pass) Unnecessary pass statement"

Tue, 10 Oct 2017 12:34:50 +0300fix error found by pylint 'W0104(pointless-statement) Statement seems to have no effect'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 10 Oct 2017 12:34:50 +0300] rev 1856
fix error found by pylint 'W0104(pointless-statement) Statement seems to have no effect'

Tue, 10 Oct 2017 12:21:46 +0300fix pylint warning "(undefined-loop-variable) Using possibly undefined loop variable 'X'"
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 10 Oct 2017 12:21:46 +0300] rev 1855
fix pylint warning "(undefined-loop-variable) Using possibly undefined loop variable 'X'"

Tue, 10 Oct 2017 11:58:30 +0300fix pylint warning 'C0112(empty-docstring) Empty function docstring'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 10 Oct 2017 11:58:30 +0300] rev 1854
fix pylint warning 'C0112(empty-docstring) Empty function docstring'

Mon, 09 Oct 2017 18:13:26 +0300fix pylint warning "(relative-import) Relative import 'Y', should be 'X.Y'"
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 09 Oct 2017 18:13:26 +0300] rev 1853
fix pylint warning "(relative-import) Relative import 'Y', should be 'X.Y'"

Mon, 09 Oct 2017 16:04:39 +0300fix pylint warning '(dangerous-default-value) Dangerous default value {} as argument'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 09 Oct 2017 16:04:39 +0300] rev 1852
fix pylint warning '(dangerous-default-value) Dangerous default value {} as argument'

Mon, 09 Oct 2017 12:30:14 +0300fix pylint warning '(old-style-class) Old-style class defined.'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 09 Oct 2017 12:30:14 +0300] rev 1851
fix pylint warning '(old-style-class) Old-style class defined.'

This warning is ignored for classes from PyJSLib, because library
overrides base object class.

Fri, 06 Oct 2017 17:52:34 +0300fix pylint warning '(unused-import), Unused import connectors'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 06 Oct 2017 17:52:34 +0300] rev 1850
fix pylint warning '(unused-import), Unused import connectors'

Thu, 05 Oct 2017 16:46:29 +0300fix typos
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 05 Oct 2017 16:46:29 +0300] rev 1849
fix typos

Thu, 05 Oct 2017 16:41:31 +0300comment out unused code SFC_Step.RefreshBoundingBox()
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 05 Oct 2017 16:41:31 +0300] rev 1848
comment out unused code SFC_Step.RefreshBoundingBox()

Thu, 05 Oct 2017 16:38:49 +0300explicitly mark unused variables found by pylint with _ or dummy
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 05 Oct 2017 16:38:49 +0300] rev 1847
explicitly mark unused variables found by pylint with _ or dummy

pylint don't ignores unused variables with '_' in the name, even when
they are started with '_'. This bug is already fixed upstream, to fix
this in all versions of pylint custom dummy-variables-rgx is used
'_+$|(_[a-zA-Z0-9_]*[a-zA-Z0-9]+?$)|dummy'

Tue, 03 Oct 2017 16:31:31 +0300remove unused variables found by pylint
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 03 Oct 2017 16:31:31 +0300] rev 1846
remove unused variables found by pylint

Tue, 03 Oct 2017 16:12:55 +0300update .PHONE target in Makefile for mki18n.py
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 03 Oct 2017 16:12:55 +0300] rev 1845
update .PHONE target in Makefile for mki18n.py

Tue, 03 Oct 2017 16:08:40 +0300make mki18n return 0 on success
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 03 Oct 2017 16:08:40 +0300] rev 1844
make mki18n return 0 on success

Tue, 03 Oct 2017 16:08:00 +0300update list with files for internatialization, app.fil
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 03 Oct 2017 16:08:00 +0300] rev 1843
update list with files for internatialization, app.fil

Tue, 03 Oct 2017 16:07:02 +0300move README content to Makefile
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 03 Oct 2017 16:07:02 +0300] rev 1842
move README content to Makefile

It's not necessary to copy commands from README anymore. Just use
'make source_list', 'make template' or 'make locales'.

Mon, 02 Oct 2017 13:19:06 +0300fix pylint warning '(global-variable-not-assigned) Using global for 'X' but no assignment is done'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 02 Oct 2017 13:19:06 +0300] rev 1841
fix pylint warning '(global-variable-not-assigned) Using global for 'X' but no assignment is done'

Mon, 02 Oct 2017 12:43:01 +0300fix pylint error '(function-redefined) method already defined'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 02 Oct 2017 12:43:01 +0300] rev 1840
fix pylint error '(function-redefined) method already defined'

Fri, 29 Sep 2017 16:48:42 +0300fix pylint warning '(unreachable) Unreachable code'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 29 Sep 2017 16:48:42 +0300] rev 1839
fix pylint warning '(unreachable) Unreachable code'

Fri, 29 Sep 2017 16:39:52 +0300fix pylint warning (bad-indentation) Bad indentation. Found X spaces, expected Y
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 29 Sep 2017 16:39:52 +0300] rev 1838
fix pylint warning (bad-indentation) Bad indentation. Found X spaces, expected Y

Fri, 29 Sep 2017 16:26:15 +0300fix pylint warning '(pointless-string-statement) String statement has no effect'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 29 Sep 2017 16:26:15 +0300] rev 1837
fix pylint warning '(pointless-string-statement) String statement has no effect'

Python doesn't support docstring for variables directly. Where
appropriate Sphinx style for docstrings for variables is used
'#: some-docstring'

Fri, 29 Sep 2017 15:36:33 +0300fix error __init__ method from base class is not called
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 29 Sep 2017 15:36:33 +0300] rev 1836
fix error __init__ method from base class is not called

Thu, 28 Sep 2017 17:24:33 +0300fix more than one statement on a single line
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 28 Sep 2017 17:24:33 +0300] rev 1835
fix more than one statement on a single line

Thu, 28 Sep 2017 17:20:31 +0300fix ungrouped imports from package X
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 28 Sep 2017 17:20:31 +0300] rev 1834
fix ungrouped imports from package X

Thu, 28 Sep 2017 16:25:05 +0300fix unnecessary lambda and enable corresponding pylint check
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 28 Sep 2017 16:25:05 +0300] rev 1833
fix unnecessary lambda and enable corresponding pylint check

Thu, 28 Sep 2017 15:17:57 +0300fix wrong-import-order. first standard modules are imported, then others
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 28 Sep 2017 15:17:57 +0300] rev 1832
fix wrong-import-order. first standard modules are imported, then others

Thu, 28 Sep 2017 12:20:40 +0300fix (old-style-class) Old-style class defined error for most parts of
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 28 Sep 2017 12:20:40 +0300] rev 1831
fix (old-style-class) Old-style class defined error for most parts of
the code

only PyJS code is left, because it does some fancy tricks and can't be
easily fixed. So far PyJS doesn't support Python3 anyway.

Fri, 22 Sep 2017 20:12:22 +0300remove in-tree version of Zeroconf and use upstream from
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 22 Sep 2017 20:12:22 +0300] rev 1830
remove in-tree version of Zeroconf and use upstream from
python-zeroconf package

Fri, 22 Sep 2017 18:06:15 +0300remove reimported modules
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 22 Sep 2017 18:06:15 +0300] rev 1829
remove reimported modules

Fri, 22 Sep 2017 16:37:38 +0300fix unnecessary parens after keyword
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 22 Sep 2017 16:37:38 +0300] rev 1828
fix unnecessary parens after keyword

Fri, 22 Sep 2017 10:57:57 +0300enable pylint checker
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 22 Sep 2017 10:57:57 +0300] rev 1827
enable pylint checker

so far only print statement is checked

Fri, 22 Sep 2017 10:54:42 +0300fix usage of python2-only print statement
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 22 Sep 2017 10:54:42 +0300] rev 1826
fix usage of python2-only print statement

Fri, 22 Sep 2017 10:52:44 +0300run python tests with non-english locale to catch bugs related to localization
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 22 Sep 2017 10:52:44 +0300] rev 1825
run python tests with non-english locale to catch bugs related to localization

Thu, 21 Sep 2017 17:19:18 +0300make it possible to update XSD schema in project controller after new
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 21 Sep 2017 17:19:18 +0300] rev 1824
make it possible to update XSD schema in project controller after new
target PLC is added or removed.

For example:


...
import targets
targets.targets["PLC"] = {"xsd": os.path.join(self.customBeremizPath, "PLCtarget", xsd),
"class": lambda: PLC_target,
"code": {"plc_PLC_main.c": os.path.join(self.customBeremizPath, "PLCtarget", "plc_PLC_main.c")}
}

from ProjectController import ProjectController, GetProjectControllerXSD
ProjectController.XSD = GetProjectControllerXSD()

Thu, 21 Sep 2017 16:06:51 +0300fix commit "lazy initialization of highlight pens and brushes
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 21 Sep 2017 16:06:51 +0300] rev 1823
fix commit "lazy initialization of highlight pens and brushes
for DebugVariableViewer" (5562f34f)

Thu, 21 Sep 2017 15:04:15 +0300clean build example project after running test
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 21 Sep 2017 15:04:15 +0300] rev 1822
clean build example project after running test

Thu, 21 Sep 2017 15:02:36 +0300fix problem if DataTypeEditor was imported before localization is
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 21 Sep 2017 15:02:36 +0300] rev 1821
fix problem if DataTypeEditor was imported before localization is
loaded

That doesn't affect systems with english locales.

Sat, 16 Sep 2017 21:26:17 +0300add shell script to run all python tests and automatically handle Xvfb
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 16 Sep 2017 21:26:17 +0300] rev 1820
add shell script to run all python tests and automatically handle Xvfb

Sat, 16 Sep 2017 21:24:22 +0300add PLCOpenEditor tests
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 16 Sep 2017 21:24:22 +0300] rev 1819
add PLCOpenEditor tests

Sat, 16 Sep 2017 21:22:53 +0300run application tests in full screen mode
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 16 Sep 2017 21:22:53 +0300] rev 1818
run application tests in full screen mode

Sat, 16 Sep 2017 21:22:06 +0300clean sys.argv, because if test is running from pytest
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 16 Sep 2017 21:22:06 +0300] rev 1817
clean sys.argv, because if test is running from pytest
sys.argv contains string "pytest --timeout 0 ./tests/tools"
Beremiz application parses it and throws exception.

Sat, 16 Sep 2017 21:19:19 +0300rework Beremiz application "testCheckProject" test to allow easier reuse later
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 16 Sep 2017 21:19:19 +0300] rev 1816
rework Beremiz application "testCheckProject" test to allow easier reuse later

Sat, 16 Sep 2017 21:04:34 +0300add application name for PLCOpenEditor
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 16 Sep 2017 21:04:34 +0300] rev 1815
add application name for PLCOpenEditor

This is needed to work user configuration load/store, if PLCOpenEditor
is launched from test environment.

Fri, 15 Sep 2017 20:30:24 +0300rewrite PLCOpenEditor. Add PLCOpenEditorApp class for easier customizations.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 15 Sep 2017 20:30:24 +0300] rev 1814
rewrite PLCOpenEditor. Add PLCOpenEditorApp class for easier customizations.

Fri, 15 Sep 2017 20:28:54 +0300lazy locale initialization
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 15 Sep 2017 20:28:54 +0300] rev 1813
lazy locale initialization

wx.Locale() can't be called without wx.App. So don't call it at
import. It makes PLCOpenEditor simpler.

Fri, 15 Sep 2017 20:05:41 +0300use CustomIntCtrl instead of wx.SpinCtrl because it doesn't support
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 15 Sep 2017 20:05:41 +0300] rev 1812
use CustomIntCtrl instead of wx.SpinCtrl because it doesn't support
long integer needed for UDINT, (U)LINT types.

This commit complements commit 74a3f4d "fix LINT and ULINT ranges".

Fri, 15 Sep 2017 20:01:21 +0300add custom TextCtrl allowed to enter long integer with bounds checking
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 15 Sep 2017 20:01:21 +0300] rev 1811
add custom TextCtrl allowed to enter long integer with bounds checking

It's needed because wx.SpinCtrl supports only 'int' type. For UDINT
and (U)LINT long type is necessary.

Fri, 15 Sep 2017 19:53:49 +0300use pytest for testing
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 15 Sep 2017 19:53:49 +0300] rev 1810
use pytest for testing

Fri, 15 Sep 2017 19:51:31 +0300run separate test on every project instead of one big long test all projects
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 15 Sep 2017 19:51:31 +0300] rev 1809
run separate test on every project instead of one big long test all projects

Fri, 15 Sep 2017 19:45:41 +0300move configuration for test environment into separate file conftest.py
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 15 Sep 2017 19:45:41 +0300] rev 1808
move configuration for test environment into separate file conftest.py

Fri, 15 Sep 2017 19:01:31 +0300lazy initialization of highlight pens and brushes for DebugVariableViewer
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 15 Sep 2017 19:01:31 +0300] rev 1807
lazy initialization of highlight pens and brushes for DebugVariableViewer

Constructors wx.Pen() and wx.Brush() require wx.App to exist already.
That causes crash during import of the control,
because import is done before calling main application code.

Fri, 15 Sep 2017 18:57:20 +0300add '_' function to builtin dictionary at import time
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 15 Sep 2017 18:57:20 +0300] rev 1806
add '_' function to builtin dictionary at import time

This allows to import many Beremiz python modules before calling
util.misc.InstallLocalRessources().

Fri, 15 Sep 2017 18:51:42 +0300remove builtin BMZ_DBG. It's not used.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 15 Sep 2017 18:51:42 +0300] rev 1805
remove builtin BMZ_DBG. It's not used.

Wed, 13 Sep 2017 15:39:48 +0300update translation strings
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 13 Sep 2017 15:39:48 +0300] rev 1804
update translation strings

Wed, 13 Sep 2017 15:35:43 +0300updated all existing translations
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 13 Sep 2017 15:35:43 +0300] rev 1803
updated all existing translations
added new languages: Portuguese (Portugal), Italian, Hungarian,
Spanish and Bengali. See version.py for information about translators.

Wed, 13 Sep 2017 10:18:04 +0300fix LINT and ULINT ranges
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 13 Sep 2017 10:18:04 +0300] rev 1802
fix LINT and ULINT ranges

Tue, 12 Sep 2017 18:32:13 +0300found installed Inkscape on Windows
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 12 Sep 2017 18:32:13 +0300] rev 1801
found installed Inkscape on Windows

tested with Inkscape version 0.9 on Windows 7.

Tue, 12 Sep 2017 16:49:35 +0300make possible to turn off at compile time online debugging, logging
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 12 Sep 2017 16:49:35 +0300] rev 1800
make possible to turn off at compile time online debugging, logging
and external sync functionality

Defines TARGET_DEBUG_DISABLE, TARGET_LOGGING_DISABLE, TARGET_EXT_SYNC_DISABLE
allow to use generated PLC code in low-cost microcontrollers,
integrate into external programs and so on.

main.c:
extern void __run(void);
int main(void)
{
for(;;) {
__run();
// sleep common_ticktime__ ns
// add common_ticktime__ ns to __CURRENT_TIME
}
return 0;
}

Compile for example for arm bare-metal:
../build$ arm-none-eabi-gcc \
-DTARGET_DEBUG_DISABLE -DTARGET_LOGGER_DISABLE
-DTARGET_EXT_SYNC_DISABLE \
-flto -ffunction-sections -fdata-sections -I../../../../matiec/lib/C \
*.c \
-nodefaultlibs --specs=nano.specs -Wl,--static -Wl,--gc-section -Wl,--start-group -lc -lm -lnosys -lgcc -Wl,--end-group

Tue, 12 Sep 2017 14:22:17 +0300make default caption for PouNameDialog translatable
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 12 Sep 2017 14:22:17 +0300] rev 1799
make default caption for PouNameDialog translatable

Tue, 12 Sep 2017 14:18:50 +0300fix max value for UDINT and ULINT types
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 12 Sep 2017 14:18:50 +0300] rev 1798
fix max value for UDINT and ULINT types

Tue, 12 Sep 2017 14:13:39 +0300update Build icon
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 12 Sep 2017 14:13:39 +0300] rev 1797
update Build icon

Tue, 12 Sep 2017 10:21:51 +0300add couple Beremiz application tests
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 12 Sep 2017 10:21:51 +0300] rev 1796
add couple Beremiz application tests

These tests trigger around 45% of python code.
Used in tests docker files are avaiable here:
https://bitbucket.org/skvorl/beremiz-dockerfiles

Fri, 08 Sep 2017 11:53:48 +0300fix problem if _should_write is called by expired timer after
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 08 Sep 2017 11:53:48 +0300] rev 1795
fix problem if _should_write is called by expired timer after
termination of wx application.

Mon, 28 Aug 2017 10:49:53 +0000Initial Bitbucket Pipelines configuration
Sergey Surkov <surkovsv93@gmail.com> [Mon, 28 Aug 2017 10:49:53 +0000] rev 1794
Initial Bitbucket Pipelines configuration

Mon, 28 Aug 2017 13:43:46 +0300fix bug with unfinished debug thread
Surkov Sergey <surkovsv93@gmail.com> [Mon, 28 Aug 2017 13:43:46 +0300] rev 1793
fix bug with unfinished debug thread
this bug occurs when user doesn't stop debugging process in current project, and opens another project

Fri, 25 Aug 2017 14:01:44 +0300unify exception handling of Beremiz and PLCOpenEditor
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 25 Aug 2017 14:01:44 +0300] rev 1792
unify exception handling of Beremiz and PLCOpenEditor

Fri, 25 Aug 2017 12:23:45 +0300fix problem running PLCOpenEditor
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 25 Aug 2017 12:23:45 +0300] rev 1791
fix problem running PLCOpenEditor

$ ./PLCOpenEditor.py
../src/common/stdpbase.cpp(62): assert "traits" failed in Get(): create wxApp before calling this

Regression was introduced by '3311eea' (clean-up: fix PEP8 E402 module level import not at top of file)

Fri, 25 Aug 2017 12:01:23 +0300don't check any particular wx version
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 25 Aug 2017 12:01:23 +0300] rev 1790
don't check any particular wx version

Beremiz works with any version of wx.

Fri, 25 Aug 2017 11:22:08 +0300fix problem when Beremiz is running without matiec installed
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 25 Aug 2017 11:22:08 +0300] rev 1789
fix problem when Beremiz is running without matiec installed

set matiec settings only once on first use of ProjectController class and give
user-friendly message on compilation about missing matiec
installation.


Traceback (most recent call last):
File "Beremiz.py", line 197, in <module>
beremiz.Start()
File "Beremiz.py", line 192, in Start
self.CreateApplication()
File "Beremiz.py", line 130, in CreateApplication
self.BackgroundInitialization()
File "Beremiz.py", line 137, in BackgroundInitialization
self.ImportModules()
File "Beremiz.py", line 176, in ImportModules
import BeremizIDE
File
"BeremizIDE.py", line 76, in <module>
from ProjectController import ProjectController, GetAddMenuItems,
MATIEC_ERROR_MODEL, ITEM_CONFNODE
File
"ProjectController.py", line 177, in <module>
iec2c_cfg = Iec2CSettings()
File
"ProjectController.py", line 101, in __init__
self.ieclib_c_path = self.findLibCPath()
File
"ProjectController.py", line 135, in findLibCPath
os.path.join(self.ieclib_path, "C"),
File "/usr/lib/python2.7/posixpath.py", line 70, in join
elif path == '' or path.endswith('/'):
AttributeError: 'NoneType' object has no attribute 'endswith'

Tue, 22 Aug 2017 14:15:49 +0000Initial Bitbucket Pipelines configuration
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 22 Aug 2017 14:15:49 +0000] rev 1788
Initial Bitbucket Pipelines configuration

Tue, 22 Aug 2017 17:14:40 +0300add configuration for Bitbucket pipelines
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 22 Aug 2017 17:14:40 +0300] rev 1787
add configuration for Bitbucket pipelines

Tue, 22 Aug 2017 17:14:08 +0300add shell script to test Beremiz python code
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 22 Aug 2017 17:14:08 +0300] rev 1786
add shell script to test Beremiz python code

currently only codestyle checking is done using pycodestyle (ex-pep8).
Later checks by flake8 and pylint maybe enabled.

Tue, 22 Aug 2017 12:45:06 +0300clean-up: fix PEP8 W503 line break before binary operator
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 22 Aug 2017 12:45:06 +0300] rev 1785
clean-up: fix PEP8 W503 line break before binary operator

Mon, 21 Aug 2017 23:22:58 +0300fix codestyle issues according to PEP8
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 21 Aug 2017 23:22:58 +0300] rev 1784
fix codestyle issues according to PEP8

Mon, 21 Aug 2017 22:41:37 +0300clean-up: fix PEP8 E402 module level import not at top of file
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 21 Aug 2017 22:41:37 +0300] rev 1783
clean-up: fix PEP8 E402 module level import not at top of file

Mon, 21 Aug 2017 21:55:18 +0300clean-up: fix PEP8 E265 block comment should start with '# '
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 21 Aug 2017 21:55:18 +0300] rev 1782
clean-up: fix PEP8 E265 block comment should start with '# '

Sat, 19 Aug 2017 21:06:54 +0300clean-up: fix PEP8 E266 too many leading '#' for block comment
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 19 Aug 2017 21:06:54 +0300] rev 1781
clean-up: fix PEP8 E266 too many leading '#' for block comment

Sat, 19 Aug 2017 18:12:20 +0300clean-up: fix PEP8 E722 do not use bare except'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 19 Aug 2017 18:12:20 +0300] rev 1780
clean-up: fix PEP8 E722 do not use bare except'

better it'd be to use particular exception instead of 'except Exception'.

Sat, 19 Aug 2017 17:17:54 +0300clean-up: fix PEP8 E115 expected an indented block (comment)
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 19 Aug 2017 17:17:54 +0300] rev 1779
clean-up: fix PEP8 E115 expected an indented block (comment)

Sat, 19 Aug 2017 17:12:12 +0300clean-up: fix PEP8 E721 do not compare types, use 'isinstance()'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 19 Aug 2017 17:12:12 +0300] rev 1778
clean-up: fix PEP8 E721 do not compare types, use 'isinstance()'

Sat, 19 Aug 2017 17:04:31 +0300clean-up: fix PEP8 E131 continuation line unaligned for hanging indent
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 19 Aug 2017 17:04:31 +0300] rev 1777
clean-up: fix PEP8 E131 continuation line unaligned for hanging indent

Sat, 19 Aug 2017 16:45:37 +0300clean-up: fix PEP8 E122 continuation line missing indentation or outdented
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 19 Aug 2017 16:45:37 +0300] rev 1776
clean-up: fix PEP8 E122 continuation line missing indentation or outdented

Sat, 19 Aug 2017 16:30:15 +0300clean-up: fix PEP8 E713 test for membership should be 'not in'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 19 Aug 2017 16:30:15 +0300] rev 1775
clean-up: fix PEP8 E713 test for membership should be 'not in'

Sat, 19 Aug 2017 01:11:27 +0300clean-up: fix PEP8 E272 multiple spaces before keyword
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 19 Aug 2017 01:11:27 +0300] rev 1774
clean-up: fix PEP8 E272 multiple spaces before keyword

Sat, 19 Aug 2017 00:58:44 +0300clean-up: fix PEP8 E124 closing bracket does not match visual indentation
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 19 Aug 2017 00:58:44 +0300] rev 1773
clean-up: fix PEP8 E124 closing bracket does not match visual indentation

Sat, 19 Aug 2017 00:30:22 +0300clean-up: fix PEP8 W191 indentation contains tabs
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 19 Aug 2017 00:30:22 +0300] rev 1772
clean-up: fix PEP8 W191 indentation contains tabs

Sat, 19 Aug 2017 00:11:12 +0300clean-up: fix PEP8 E211 whitespace before '[' or '('
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 19 Aug 2017 00:11:12 +0300] rev 1771
clean-up: fix PEP8 E211 whitespace before '[' or '('

Sat, 19 Aug 2017 00:04:33 +0300clean-up: fix PEP8 E114 indentation is not a multiple of four (comment)
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 19 Aug 2017 00:04:33 +0300] rev 1770
clean-up: fix PEP8 E114 indentation is not a multiple of four (comment)

Fri, 18 Aug 2017 23:39:15 +0300clean-up: fix PEP8 E125 continuation line with same indent as next logical line
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 18 Aug 2017 23:39:15 +0300] rev 1769
clean-up: fix PEP8 E125 continuation line with same indent as next logical line

Fri, 18 Aug 2017 20:14:38 +0300clean-up: fix PEP8 E128 continuation line under-indented for visual indent
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 18 Aug 2017 20:14:38 +0300] rev 1768
clean-up: fix PEP8 E128 continuation line under-indented for visual indent

Fri, 18 Aug 2017 12:36:31 +0300clean-up: fix PEP8 E127 continuation line over-indented for visual indent
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 18 Aug 2017 12:36:31 +0300] rev 1767
clean-up: fix PEP8 E127 continuation line over-indented for visual indent

Thu, 17 Aug 2017 17:25:17 +0300clean-up: fix PEP8 E129 visually indented line with same indent as next logical line
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 17 Aug 2017 17:25:17 +0300] rev 1766
clean-up: fix PEP8 E129 visually indented line with same indent as next logical line

Thu, 17 Aug 2017 16:26:32 +0300clean-up: fix PEP8 W602 deprecated form of raising exception
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 17 Aug 2017 16:26:32 +0300] rev 1765
clean-up: fix PEP8 W602 deprecated form of raising exception

Thu, 17 Aug 2017 15:43:25 +0300clean-up: fix PEP8 E502 the backslash is redundant between brackets
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 17 Aug 2017 15:43:25 +0300] rev 1764
clean-up: fix PEP8 E502 the backslash is redundant between brackets

Thu, 17 Aug 2017 14:27:06 +0300clean-up: fix PEP8 W601 .has_key() is deprecated, use 'in'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 17 Aug 2017 14:27:06 +0300] rev 1763
clean-up: fix PEP8 W601 .has_key() is deprecated, use 'in'

Thu, 17 Aug 2017 11:39:10 +0300clean-up: fix PEP8 E731 do not assign a lambda expression, use a def
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 17 Aug 2017 11:39:10 +0300] rev 1762
clean-up: fix PEP8 E731 do not assign a lambda expression, use a def

Thu, 17 Aug 2017 10:12:04 +0300clean-up: fix PEP8 E203 whitespace before ','
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 17 Aug 2017 10:12:04 +0300] rev 1761
clean-up: fix PEP8 E203 whitespace before ','

Thu, 17 Aug 2017 10:08:23 +0300clean-up: fix PEP8 E262 inline comment should start with '# '
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 17 Aug 2017 10:08:23 +0300] rev 1760
clean-up: fix PEP8 E262 inline comment should start with '# '

Thu, 17 Aug 2017 10:04:24 +0300clean-up: fix PEP8 E712 comparison to True should be 'if cond is True:' or 'if cond:'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 17 Aug 2017 10:04:24 +0300] rev 1759
clean-up: fix PEP8 E712 comparison to True should be 'if cond is True:' or 'if cond:'

Thu, 17 Aug 2017 09:55:39 +0300clean-up: fix PEP8 E222 multiple spaces after operator
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 17 Aug 2017 09:55:39 +0300] rev 1758
clean-up: fix PEP8 E222 multiple spaces after operator

Wed, 16 Aug 2017 17:27:58 +0300clean-up: fix PEP8 E111 indentation is not a multiple of four
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 16 Aug 2017 17:27:58 +0300] rev 1757
clean-up: fix PEP8 E111 indentation is not a multiple of four

Wed, 16 Aug 2017 16:37:45 +0300clean-up: fix PEP8 E701 multiple statements on one line (colon)
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 16 Aug 2017 16:37:45 +0300] rev 1756
clean-up: fix PEP8 E701 multiple statements on one line (colon)

Wed, 16 Aug 2017 15:18:57 +0300clean-up: fix PEP8 E741 ambiguous variable name
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 16 Aug 2017 15:18:57 +0300] rev 1755
clean-up: fix PEP8 E741 ambiguous variable name

Wed, 16 Aug 2017 13:56:36 +0300clean-up: fix most PEP8 E221 multiple spaces before operator
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 16 Aug 2017 13:56:36 +0300] rev 1754
clean-up: fix most PEP8 E221 multiple spaces before operator

Wed, 16 Aug 2017 13:49:02 +0300clean-up: fix most PEP8 E266 too many leading '#' for block comment
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 16 Aug 2017 13:49:02 +0300] rev 1753
clean-up: fix most PEP8 E266 too many leading '#' for block comment

Wed, 16 Aug 2017 13:01:13 +0300clean-up: fix PEP8 E703 statement ends with a semicolon
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 16 Aug 2017 13:01:13 +0300] rev 1752
clean-up: fix PEP8 E703 statement ends with a semicolon

Wed, 16 Aug 2017 12:57:52 +0300clean-up: fix PEP8 E301 expected 1 blank line, found 0
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 16 Aug 2017 12:57:52 +0300] rev 1751
clean-up: fix PEP8 E301 expected 1 blank line, found 0

Wed, 16 Aug 2017 12:53:23 +0300clean-up: fix PEP8 E306 expected 1 blank line before a nested definition, found X
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 16 Aug 2017 12:53:23 +0300] rev 1750
clean-up: fix PEP8 E306 expected 1 blank line before a nested definition, found X

Wed, 16 Aug 2017 12:48:08 +0300clean-up: fix PEP8 E305 expected 2 blank lines after class or function definition
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 16 Aug 2017 12:48:08 +0300] rev 1749
clean-up: fix PEP8 E305 expected 2 blank lines after class or function definition

Wed, 16 Aug 2017 12:30:31 +0300clean-up: fix PEP8 W391 blank line at end of file
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 16 Aug 2017 12:30:31 +0300] rev 1748
clean-up: fix PEP8 W391 blank line at end of file

Wed, 16 Aug 2017 12:21:05 +0300clean-up: fix PEP8 E201 whitespace after '{'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 16 Aug 2017 12:21:05 +0300] rev 1747
clean-up: fix PEP8 E201 whitespace after '{'

Wed, 16 Aug 2017 12:03:46 +0300clean-up: fix PEP8 E202 whitespace before ')'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 16 Aug 2017 12:03:46 +0300] rev 1746
clean-up: fix PEP8 E202 whitespace before ')'

Wed, 16 Aug 2017 11:47:27 +0300clean-up: fix PEP8 E227 missing whitespace around bitwise or shift operator
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 16 Aug 2017 11:47:27 +0300] rev 1745
clean-up: fix PEP8 E227 missing whitespace around bitwise or shift operator

Tue, 15 Aug 2017 22:38:43 +0300clean-up: fix PEP8 E251 unexpected spaces around keyword / parameter equals
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 15 Aug 2017 22:38:43 +0300] rev 1744
clean-up: fix PEP8 E251 unexpected spaces around keyword / parameter equals

Tue, 15 Aug 2017 17:01:51 +0300clean-up: fix PEP8 E711 comparison to None should be 'if cond is not None:'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 15 Aug 2017 17:01:51 +0300] rev 1743
clean-up: fix PEP8 E711 comparison to None should be 'if cond is not None:'

Tue, 15 Aug 2017 16:48:49 +0300clean-up: fix PEP8 E225 missing whitespace around operator
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 15 Aug 2017 16:48:49 +0300] rev 1742
clean-up: fix PEP8 E225 missing whitespace around operator

Tue, 15 Aug 2017 16:01:18 +0300clean-up: fix PEP8 E303 too many blank lines
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 15 Aug 2017 16:01:18 +0300] rev 1741
clean-up: fix PEP8 E303 too many blank lines

Tue, 15 Aug 2017 15:50:30 +0300clean-up: fix PEP8 E231 missing whitespace after ':' or ','
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 15 Aug 2017 15:50:30 +0300] rev 1740
clean-up: fix PEP8 E231 missing whitespace after ':' or ','

Tue, 15 Aug 2017 12:17:51 +0300clean-up: fix PEP8 E203 whitespace before ':' and whitespace before ','
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 15 Aug 2017 12:17:51 +0300] rev 1739
clean-up: fix PEP8 E203 whitespace before ':' and whitespace before ','

Mon, 14 Aug 2017 23:38:28 +0300clean-up: fix PEP8 E271 multiple spaces after keyword
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 14 Aug 2017 23:38:28 +0300] rev 1738
clean-up: fix PEP8 E271 multiple spaces after keyword

Mon, 14 Aug 2017 23:34:22 +0300clean-up: fix PEP8 E261 at least two spaces before inline comment
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 14 Aug 2017 23:34:22 +0300] rev 1737
clean-up: fix PEP8 E261 at least two spaces before inline comment

Mon, 14 Aug 2017 23:27:15 +0300clean-up: fix PEP8 E302 expected 2 blank lines, found 1
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 14 Aug 2017 23:27:15 +0300] rev 1736
clean-up: fix PEP8 E302 expected 2 blank lines, found 1

Mon, 14 Aug 2017 22:30:41 +0300clean-up: fix PEP8 W293 blank line contains whitespace
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 14 Aug 2017 22:30:41 +0300] rev 1735
clean-up: fix PEP8 W293 blank line contains whitespace

Mon, 14 Aug 2017 22:23:17 +0300clean-up: fix some PEP8 E228 missing whitespace around modulo operator
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 14 Aug 2017 22:23:17 +0300] rev 1734
clean-up: fix some PEP8 E228 missing whitespace around modulo operator

Mon, 14 Aug 2017 21:31:01 +0300clean-up: fix some PEP8 E265 block comment should start with '# '
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 14 Aug 2017 21:31:01 +0300] rev 1733
clean-up: fix some PEP8 E265 block comment should start with '# '

Mon, 14 Aug 2017 21:20:32 +0300clean-up: fix PEP8 E401 multiple imports on one line
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 14 Aug 2017 21:20:32 +0300] rev 1732
clean-up: fix PEP8 E401 multiple imports on one line

Mon, 14 Aug 2017 21:09:48 +0300convert some files from CRLF to LF
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 14 Aug 2017 21:09:48 +0300] rev 1731
convert some files from CRLF to LF

It'll break for these files hg blame/annotate. Fortunately not many
files are affected.

Mon, 14 Aug 2017 19:13:01 +0300clean-up for PEP8: fix W291 trailing whitespace
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 14 Aug 2017 19:13:01 +0300] rev 1730
clean-up for PEP8: fix W291 trailing whitespace

Mon, 21 Aug 2017 20:17:19 +0000README.md edited online with Bitbucket
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 21 Aug 2017 20:17:19 +0000] rev 1729
README.md edited online with Bitbucket

Mon, 21 Aug 2017 20:16:00 +0000fix link to documentation in README.md
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 21 Aug 2017 20:16:00 +0000] rev 1728
fix link to documentation in README.md

Mon, 21 Aug 2017 20:14:34 +0000Add information about built official documentation to README.md
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 21 Aug 2017 20:14:34 +0000] rev 1727
Add information about built official documentation to README.md

Fri, 11 Aug 2017 15:18:19 +0300don't allow empty dimension for ARRAY types
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 11 Aug 2017 15:18:19 +0300] rev 1726
don't allow empty dimension for ARRAY types

Wed, 09 Aug 2017 14:34:28 +0300ignore built documentation
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 09 Aug 2017 14:34:28 +0300] rev 1725
ignore built documentation

Wed, 09 Aug 2017 14:13:17 +0300manual: add untranslated po files for French and Korean
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 09 Aug 2017 14:13:17 +0300] rev 1724
manual: add untranslated po files for French and Korean

Wed, 09 Aug 2017 14:11:20 +0300build missing pot files, when building HTML documentation
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 09 Aug 2017 14:11:20 +0300] rev 1723
build missing pot files, when building HTML documentation

Mon, 07 Aug 2017 14:28:29 +0300fix some typos
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 07 Aug 2017 14:28:29 +0300] rev 1722
fix some typos

Sun, 30 Jul 2017 13:54:51 -0700Changed title of new project dialog from:
janbarslo [Sun, 30 Jul 2017 13:54:51 -0700] rev 1721
Changed title of new project dialog from:
Choose a project
to
Choose an empty directory for new project

Sun, 30 Jul 2017 13:51:43 -0700Changed title of New Project dialog
janbarslo [Sun, 30 Jul 2017 13:51:43 -0700] rev 1720
Changed title of New Project dialog
from
Chose a project
to
Choose an empty directory for new project

Fri, 28 Jul 2017 15:34:11 +0300skip hidden files and directories on permission check
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 28 Jul 2017 15:34:11 +0300] rev 1719
skip hidden files and directories on permission check

To fix problems with git, because .git subdirectory contains
read-only repository objects.

Fri, 14 Jul 2017 18:26:20 +0300change structure of filename for bug reports in Beremiz and
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 14 Jul 2017 18:26:20 +0300] rev 1718
change structure of filename for bug reports in Beremiz and
PLCOpenEditor so bug reports could be easily sorted by name

Wed, 05 Jul 2017 13:11:45 +0300fix target Xenomai missing functions
wuyangtang <wuyangtang@live.com> [Wed, 05 Jul 2017 13:11:45 +0300] rev 1717
fix target Xenomai missing functions

Wed, 05 Jul 2017 13:03:58 +0300update messages.pot and messages.po
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 05 Jul 2017 13:03:58 +0300] rev 1716
update messages.pot and messages.po

Wed, 05 Jul 2017 13:02:30 +0300mki18n.py: generate messages.po (contains English strings in msgstr)
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 05 Jul 2017 13:02:30 +0300] rev 1715
mki18n.py: generate messages.po (contains English strings in msgstr)

This po file is necessary because Transifex translation platform
automatically can only import PO files. Usually messages.pot is
enough.

Wed, 05 Jul 2017 12:59:43 +0300add to i18n/README forgotten commands to add some XML schemes as source
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 05 Jul 2017 12:59:43 +0300] rev 1714
add to i18n/README forgotten commands to add some XML schemes as source
for strings and update app.fil

Tue, 04 Jul 2017 14:00:42 +0300Backout commit 92537ed because of writing localized string in node *.xml file
Surkov Sergey <surkovsv93@gmail.com> [Tue, 04 Jul 2017 14:00:42 +0300] rev 1713
Backout commit 92537ed because of writing localized string in node *.xml file

Tue, 04 Jul 2017 13:46:48 +0300Backout changeset 92537edeb2052d53ba5cad8b6da8463dbc660bb1
Surkov Sergey <surkovsv93@gmail.com> [Tue, 04 Jul 2017 13:46:48 +0300] rev 1712
Backout changeset 92537edeb2052d53ba5cad8b6da8463dbc660bb1

Wed, 28 Jun 2017 18:38:52 +0300fixes double mouse capturing after forcing variable in debug mode
Surkov Sergey <surkovsv93@gmail.com> [Wed, 28 Jun 2017 18:38:52 +0300] rev 1711
fixes double mouse capturing after forcing variable in debug mode
this problem appears on Linux

Tue, 27 Jun 2017 19:21:09 +0300fix bug with TextViewer instance in debug mode, appears after transferring new program on PLC
Surkov Sergey <surkovsv93@gmail.com> [Tue, 27 Jun 2017 19:21:09 +0300] rev 1710
fix bug with TextViewer instance in debug mode, appears after transferring new program on PLC
TextViewer isn't able to display debug values, so calling for this class SubscribeAllDataConsumers method causes error

Tue, 27 Jun 2017 13:30:48 +0300fix build problem when make command have trailing whitespace(s)
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 27 Jun 2017 13:30:48 +0300] rev 1709
fix build problem when make command have trailing whitespace(s)

whitespaces at the end are replaced with "", that causes make problem

Mon, 26 Jun 2017 19:42:42 +0300add dialog "add program", that appears after creating new project
Surkov Sergey <surkovsv93@gmail.com> [Mon, 26 Jun 2017 19:42:42 +0300] rev 1708
add dialog "add program", that appears after creating new project
also, sets one task and one instance of created program in main project resource

Mon, 26 Jun 2017 19:38:51 +0300fix i18n string selection for combobox generated from XSD
Surkov Sergey <surkovsv93@gmail.com> [Mon, 26 Jun 2017 19:38:51 +0300] rev 1707
fix i18n string selection for combobox generated from XSD

Thu, 22 Jun 2017 16:43:38 +0300update Russian and French (Fabien M) translations
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 22 Jun 2017 16:43:38 +0300] rev 1706
update Russian and French (Fabien M) translations
added Slovenian (Janez Pregelj) and Portuguese (Thiago Alves) translations

Thu, 22 Jun 2017 16:08:50 +0300l18n: update messages.pot and app.fil
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 22 Jun 2017 16:08:50 +0300] rev 1705
l18n: update messages.pot and app.fil

Thu, 22 Jun 2017 16:07:56 +0300add l18n support to variable table in CodeFileEditor (python/C extension)
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 22 Jun 2017 16:07:56 +0300] rev 1704
add l18n support to variable table in CodeFileEditor (python/C extension)

Thu, 22 Jun 2017 16:06:34 +0300set project name and character set in generated messages.pot
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 22 Jun 2017 16:06:34 +0300] rev 1703
set project name and character set in generated messages.pot

Thu, 22 Jun 2017 15:55:26 +0300close DurationEditorDialog on ENTER key
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 22 Jun 2017 15:55:26 +0300] rev 1702
close DurationEditorDialog on ENTER key

Wed, 21 Jun 2017 17:08:52 +0300add button to ForceVariableDialog to toggle forced boolean value
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 21 Jun 2017 17:08:52 +0300] rev 1701
add button to ForceVariableDialog to toggle forced boolean value

Button is added only for boolean variables.

Tue, 20 Jun 2017 18:57:29 +0300fix problem with hidden FindInPou dialog with wxPython 3.0 on Windows
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 20 Jun 2017 18:57:29 +0300] rev 1700
fix problem with hidden FindInPou dialog with wxPython 3.0 on Windows

FindInPou.IsShown() returned True, but dialog was hidden.
At same time On GNU/Linux with wxPython 3.0 there wasn't such problem.
So it's Windows specific.

Tue, 20 Jun 2017 17:01:19 +0300enable non-latin variable descriptions in CodeFileEditor
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 20 Jun 2017 17:01:19 +0300] rev 1699
enable non-latin variable descriptions in CodeFileEditor

fix following backtrace:

UnicodeEncodeError: 'ascii' codec can't encode characters in position 0-7: ordinal not in range(128)
Traceback (most recent call last):
File "beremiz/editors/CodeFileEditor.py", line 610, in GetValue
return str(self.data[row].get(self.GetColLabelValue(col, False), ""))
UnicodeEncodeError: 'ascii' codec can't encode characters in position 0-7: ordinal not in range(128)

Tue, 20 Jun 2017 16:36:17 +0300disable empty coils and contacts in LD/SFC editors
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 20 Jun 2017 16:36:17 +0300] rev 1698
disable empty coils and contacts in LD/SFC editors

Closes #30

Mon, 19 Jun 2017 19:23:31 +0300remove debug code
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 19 Jun 2017 19:23:31 +0300] rev 1697
remove debug code

Mon, 19 Jun 2017 18:49:43 +0300make all dialog have non-fixed size
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 19 Jun 2017 18:49:43 +0300] rev 1696
make all dialog have non-fixed size

this fixes the problem, that some controls may be hidden in some cases, because
dialog size is too small. This can happen when system fonts are bigger
than expected, default system them controls are bigger or if localized
strings are bigger than in English.

Fri, 09 Jun 2017 18:12:12 +0300avoid infinite loop in search
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 09 Jun 2017 18:12:12 +0300] rev 1695
avoid infinite loop in search

for example following regexp '()' creates infinite list of result

Thu, 08 Jun 2017 17:30:23 +0300make adjustable size of ArrayTypeDialog
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 08 Jun 2017 17:30:23 +0300] rev 1694
make adjustable size of ArrayTypeDialog

Thu, 08 Jun 2017 17:29:41 +0300fix problem with initial values for array of structures
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 08 Jun 2017 17:29:41 +0300] rev 1693
fix problem with initial values for array of structures

for structures wrong empty repetition attributes were generated

Tue, 06 Jun 2017 14:21:53 +0300add information about community support channel to Beremiz and PLCOpenEditor
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 06 Jun 2017 14:21:53 +0300] rev 1692
add information about community support channel to Beremiz and PLCOpenEditor

Tue, 06 Jun 2017 13:13:57 +0300cleanup wxHMI example
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 06 Jun 2017 13:13:57 +0300] rev 1691
cleanup wxHMI example

Tue, 06 Jun 2017 13:12:10 +0300cleanup wxGlade example
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 06 Jun 2017 13:12:10 +0300] rev 1690
cleanup wxGlade example

Tue, 06 Jun 2017 13:11:18 +0300add comments to wiimote example
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 06 Jun 2017 13:11:18 +0300] rev 1689
add comments to wiimote example

Tue, 06 Jun 2017 13:05:30 +0300fix running wxGlade on current Debian systems
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 06 Jun 2017 13:05:30 +0300] rev 1688
fix running wxGlade on current Debian systems

wxGlade was moved from python import path to /usr/share/wxglade

Fri, 02 Jun 2017 19:58:27 +0300rename text field in SVG graphic to match IEC code in svgui example
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 02 Jun 2017 19:58:27 +0300] rev 1687
rename text field in SVG graphic to match IEC code in svgui example

This caused svgui example to crash.

Thu, 01 Jun 2017 14:37:14 +0300disallow setting IEC location addresses for TIME, DATE, DT and TOD variables
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 01 Jun 2017 14:37:14 +0300] rev 1686
disallow setting IEC location addresses for TIME, DATE, DT and TOD variables

Size of these types is not defined and depends on the implementation
(IEC 61131-3 2.3.1).

Tue, 30 May 2017 17:09:33 +0300if there is no users matiec installation, then use system path to run iec2c
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 30 May 2017 17:09:33 +0300] rev 1685
if there is no users matiec installation, then use system path to run iec2c

search for matiec libraries in system path as well

Closes #29

Tue, 23 May 2017 16:06:29 +0300remove child node from add child node menu, if max count of the same type nodes reached
Surkov Sergey <surkovsv93@gmail.com> [Tue, 23 May 2017 16:06:29 +0300] rev 1684
remove child node from add child node menu, if max count of the same type nodes reached

Thu, 18 May 2017 18:00:56 +0300fix reducing groups with ordered elements
Surkov Sergey <surkovsv93@gmail.com> [Thu, 18 May 2017 18:00:56 +0300] rev 1683
fix reducing groups with ordered elements

Wed, 03 May 2017 11:03:44 +0300fix extra brace
Anton Midyukov [Wed, 03 May 2017 11:03:44 +0300] rev 1682
fix extra brace

Fri, 28 Apr 2017 13:28:22 +0300add getCompiler and getLinker methods, to abstract from XSD.
Paul Beltyukov <beltyukov.p.a@gmail.com> [Fri, 28 Apr 2017 13:28:22 +0300] rev 1681
add getCompiler and getLinker methods, to abstract from XSD.
add calc_source_md5 as it's more convenient especially for embedded
targets to add -DPLC_MD5="something" option at compile time than
to mess with editing binary.
add some more helper methods

Thu, 20 Apr 2017 13:01:45 +0300make run Beremiz and PLCOpen Editor, if full path contain non-lating
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 20 Apr 2017 13:01:45 +0300] rev 1680
make run Beremiz and PLCOpen Editor, if full path contain non-lating
characters

There was a problem in About dialog and in project properites tab and
probably in my other places, when str is automatically converted to
unicode string using ascii.
This patch converts str to unicode using proper encoding at the very beggining.

Wed, 12 Apr 2017 10:20:01 +0000README.md edited online with Bitbucket
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 12 Apr 2017 10:20:01 +0000] rev 1679
README.md edited online with Bitbucket

Tue, 11 Apr 2017 19:09:34 +0300fix clearing project name on opening project properties page.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 11 Apr 2017 19:09:34 +0300] rev 1678
fix clearing project name on opening project properties page.

The problem exists only on Windows with wxPython-3.0.

This happens because callback for EVT_KILL_FOCUS for a first text
control (project name) is called just after creating page with project
properties. It happens before initializing text controls from PLCController.

Tue, 11 Apr 2017 17:45:49 +0300fix problem with debugging external string variables
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 11 Apr 2017 17:45:49 +0300] rev 1677
fix problem with debugging external string variables

Debug update stopped if external string variable added to debug
variable panel.

Tue, 11 Apr 2017 12:51:35 +0300fix problem with clearing non-empty location field after changing type of config variable
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 11 Apr 2017 12:51:35 +0300] rev 1676
fix problem with clearing non-empty location field after changing type of config variable

introduced by cd9db17 ("clear variable location cell in variable
panel, if variable class or type changed").

Closes #26

Mon, 10 Apr 2017 18:29:12 +0300fix backtrace on opening program/resource on small screens
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 10 Apr 2017 18:29:12 +0300] rev 1675
fix backtrace on opening program/resource on small screens

Fix regression introduced by f4696d8 ("add stretching to columns Name,
Type, Doc in variable panel").
This problem happens only on wxPython-3.0.

Fri, 07 Apr 2017 16:54:31 +0300show whether instance of SFC action is currently active or not in its
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 07 Apr 2017 16:54:31 +0300] rev 1674
show whether instance of SFC action is currently active or not in its
debug instance view

Wed, 05 Apr 2017 14:24:52 +0300clean PLC log only if there is something to clean
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 05 Apr 2017 14:24:52 +0300] rev 1673
clean PLC log only if there is something to clean

Otherwise exception happens in Beremiz service.

Traceback (most recent call last):
File "/home/developer/WorkData/PLC/beremiz/beremiz/connectors/PYRO/_init_.py", line 113, in catcher_func
return func(*args, **kwargs)
File "/home/developer/WorkData/PLC/beremiz/beremiz/connectors/PYRO/_init_.py", line 194, in my_local_func
return RemotePLCObjectProxy._getattr_(attrName)(*args, **kwargs)
File "/usr/lib/python2.7/dist-packages/Pyro/core.py", line 381, in _call_
return self._send(self._name, args, kwargs)
File "/usr/lib/python2.7/dist-packages/Pyro/core.py", line 456, in _invokePYRO
return self.adapter.remoteInvocation(name, Pyro.constants.RIF_VarargsAndKeywords, vargs, kargs)
File "/usr/lib/python2.7/dist-packages/Pyro/protocol.py", line 457, in remoteInvocation
return self._remoteInvocation(method, flags, *args)
File "/usr/lib/python2.7/dist-packages/Pyro/protocol.py", line 532, in _remoteInvocation
answer.raiseEx()
File "/usr/lib/python2.7/dist-packages/Pyro/errors.py", line 72, in raiseEx
raise self.excObj
AttributeError: 'PLCObject' object has no attribute '_ResetLogCount'
+--- This exception occured remotely (Pyro) - Remote traceback:
Traceback (most recent call last):
File "/usr/lib/python2.7/dist-packages/Pyro/protocol.py", line 719, in _handleInvocation2
res = obj.Pyro_dyncall(req[1],flags,req[3]) # (method,flags,args)
File "/usr/lib/python2.7/dist-packages/Pyro/core.py", line 108, in Pyro_dyncall
return getattr(self.delegate or self,method) (args,*keywords)
File "/home/developer/WorkData/PLC/beremiz/beremiz/runtime/PLCObject.py", line 101, in ResetLogCount
if self._ResetLogCount is not None:
AttributeError: 'PLCObject' object has no attribute '_ResetLogCount'
+--- End of remote traceback

Wed, 05 Apr 2017 14:17:02 +0300reset loaded messages counts on new PLC program trasnfer
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 05 Apr 2017 14:17:02 +0300] rev 1672
reset loaded messages counts on new PLC program trasnfer

This fixes the problem that first message from newer PLC program maybe
lost, if it's issued before first PLC log fetching.

Closes #23

Tue, 04 Apr 2017 11:34:31 +0300add function block to variable panel if fb is added using toolbar
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 04 Apr 2017 11:34:31 +0300] rev 1671
add function block to variable panel if fb is added using toolbar

Closes #25

Tue, 28 Mar 2017 19:48:51 +0300enable to write SFC transition in IL
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 28 Mar 2017 19:48:51 +0300] rev 1670
enable to write SFC transition in IL

This commit reverts previous commit 3f3d97be9a9f.
Because the fix for the matiec problem is already upstream
(https://bitbucket.org/mjsousa/matiec/commits/ce026aee03e00c0790948a18bd7b35805457da81)

Tue, 28 Mar 2017 17:09:31 +0300fix debug button and variable tree generate for actions and transitions in POU instance variable panel
Surkov Sergey <surkovsv93@gmail.com> [Tue, 28 Mar 2017 17:09:31 +0300] rev 1669
fix debug button and variable tree generate for actions and transitions in POU instance variable panel
for 'None' type instances(Python POU's, Native, SVGUI, user-defined pou's, etc.) debug button will be disabled. If action or transition instances have opened in instance variable panel,variables from main POU will be loaded. When user press debug button on variable instance in action or transition, instance path to main POU will be used, because all variables of action or transition in instance variable tree belong to main POU.

Tue, 28 Mar 2017 11:31:05 +0300clear variable location cell in variable panel, if variable class or type changed
Surkov Sergey <surkovsv93@gmail.com> [Tue, 28 Mar 2017 11:31:05 +0300] rev 1668
clear variable location cell in variable panel, if variable class or type changed
if variable class is not local or global, or variable type is not locatable, variable location cell would be empty and read-only

Mon, 27 Mar 2017 18:03:26 +0300runtime is licensed under LGPLv2.1
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 27 Mar 2017 18:03:26 +0300] rev 1667
runtime is licensed under LGPLv2.1

Mon, 27 Mar 2017 17:40:56 +0300make command line help message for Beremiz more verbose
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 27 Mar 2017 17:40:56 +0300] rev 1666
make command line help message for Beremiz more verbose

Tue, 21 Mar 2017 18:01:09 +0300fix typos and small errors in Russian translation
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 21 Mar 2017 18:01:09 +0300] rev 1665
fix typos and small errors in Russian translation

Fri, 10 Mar 2017 19:17:43 +0300merge Beremiz launcher support
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 10 Mar 2017 19:17:43 +0300] rev 1664
merge Beremiz launcher support

Closes #13

Fri, 10 Mar 2017 19:12:43 +0300rename BeremizIDELauncher.py to Beremiz.py
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 10 Mar 2017 19:12:43 +0300] rev 1663
rename BeremizIDELauncher.py to Beremiz.py

Fri, 10 Mar 2017 17:36:18 +0300rename Beremiz.py to BeremizIDE.py
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 10 Mar 2017 17:36:18 +0300] rev 1662
rename Beremiz.py to BeremizIDE.py

Fri, 10 Mar 2017 17:09:48 +0300wrap Beremiz startup code into separate launcher class
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 10 Mar 2017 17:09:48 +0300] rev 1661
wrap Beremiz startup code into separate launcher class

this should make it easier to make customized version of Beremiz IDE.
It's easy to add own splash, change version, add/disable extensions
and many other things.

For example:

[----- MyBeremiz.py ------]
#!/usr/bin/env python
from BeremizIDELauncher import BeremizIDELauncher

class MyBeremizIDELauncher(BeremizIDELauncher):
def __init__(self):
BeremizIDELauncher.__init__(self)
self.splashPath = self.Bpath("", "splash.png")

def ShowSplashScreen(self):
# comment next line to disable splash entirely
BeremizIDELauncher.ShowSplashScreen(self)

# change version
import version
version.app_version = "3.141-rc52"

def LoadExtensions(self):
# add/modifine list of extensions
# in self.extensions
BeremizIDELauncher.LoadExtensions(self)

if __name__ == '__main__':
beremiz = MyBeremizIDELauncher()
beremiz.Start()

[-------------------------]

Fri, 10 Mar 2017 18:42:24 +0300dynamically increase size of dialog window for editing comment block
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 10 Mar 2017 18:42:24 +0300] rev 1660
dynamically increase size of dialog window for editing comment block

Thu, 09 Mar 2017 18:03:57 +0300add hotkeys to open recent projects
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 09 Mar 2017 18:03:57 +0300] rev 1659
add hotkeys to open recent projects

For simplicity only last 9 projects are saved.

Alt-F, R, 1 - to open last opened project
Alt-F, R, 2 ...
...
Alt-F, R, 9 ...

Thu, 09 Mar 2017 17:29:17 +0300fix twice shown error message box, when wrong non-valid IEC identifier entered
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 09 Mar 2017 17:29:17 +0300] rev 1658
fix twice shown error message box, when wrong non-valid IEC identifier entered

It happens when non-valid name for variable name or name of field in
structure entered. This issue is described in details here:
http://trac.wxwidgets.org/ticket/16333

Thu, 09 Mar 2017 15:35:19 +0300apply constraints to names for tasks and task instances in resource configuration
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 09 Mar 2017 15:35:19 +0300] rev 1657
apply constraints to names for tasks and task instances in resource configuration

The same rules as for IEC identifiers are applied.
- no non-lating characters, ...
- no IEC keywords
- check for duplicate names in resource configuration

closes #19

Thu, 09 Mar 2017 13:01:28 +0500Fix russian translation
PaulBeltyukov [Thu, 09 Mar 2017 13:01:28 +0500] rev 1656
Fix russian translation

Mon, 06 Mar 2017 17:39:29 +0300Merged skvorl/beremiz into default
Sergey Surkov <surkovsv93@gmail.com> [Mon, 06 Mar 2017 17:39:29 +0300] rev 1655
Merged skvorl/beremiz into default

Fri, 03 Mar 2017 15:57:58 +0300add stretching to columns Name, Type, Doc in variable panel
Surkov Sergey <surkovsv93@gmail.com> [Fri, 03 Mar 2017 15:57:58 +0300] rev 1654
add stretching to columns Name, Type, Doc in variable panel

Mon, 06 Feb 2017 20:30:39 +0300fix SFC Step flush method
Surkov Sergey <surkovsv93@gmail.com> [Mon, 06 Feb 2017 20:30:39 +0300] rev 1653
fix SFC Step flush method

Mon, 06 Feb 2017 20:23:45 +0300fix redraw debug instance tab after transferring new build to PLC. closes #15
Surkov Sergey <surkovsv93@gmail.com> [Mon, 06 Feb 2017 20:23:45 +0300] rev 1652
fix redraw debug instance tab after transferring new build to PLC. closes #15

Mon, 06 Mar 2017 17:24:05 +05001. Deleted .directory file, and added it to .hgignore.
PaulBeltyukov [Mon, 06 Mar 2017 17:24:05 +0500] rev 1651
1. Deleted .directory file, and added it to .hgignore.
2. Added russian locale .mo file.

Mon, 06 Mar 2017 12:04:15 +0500Fix russian translation
PaulBeltyukov [Mon, 06 Mar 2017 12:04:15 +0500] rev 1650
Fix russian translation

Thu, 16 Feb 2017 14:35:12 +0500Merge
PaulBeltyukov [Thu, 16 Feb 2017 14:35:12 +0500] rev 1649
Merge

Thu, 16 Feb 2017 14:34:40 +0500Safe
PaulBeltyukov [Thu, 16 Feb 2017 14:34:40 +0500] rev 1648
Safe

Fri, 27 Jan 2017 16:53:04 +0300broken code is temporarily blocked
Surkov Sergey <surkovsv93@gmail.com> [Fri, 27 Jan 2017 16:53:04 +0300] rev 1647
broken code is temporarily blocked
This code used to highlight with green color text in upper-left corner (path to current instance) in debug mode, if current instance active. Only SFC actions are affected. #16

Fri, 27 Jan 2017 16:01:23 +0300fix exception handling
Surkov Sergey <surkovsv93@gmail.com> [Fri, 27 Jan 2017 16:01:23 +0300] rev 1646
fix exception handling
now only one exception dialog is displayed, if many same type exceptions handled (like in #16), and bug reports files always save after exception, not only after pressing "OK" button in exception dialog, closes #17

Fri, 27 Jan 2017 13:04:25 +0300change directory for saving Beremiz bug reports from current working directory to TEMP directory.
Surkov Sergey <surkovsv93@gmail.com> [Fri, 27 Jan 2017 13:04:25 +0300] rev 1645
change directory for saving Beremiz bug reports from current working directory to TEMP directory.

Thu, 26 Jan 2017 17:16:54 +0300Correct element size, if block type or variable name is wider than block width.
Surkov Sergey <surkovsv93@gmail.com> [Thu, 26 Jan 2017 17:16:54 +0300] rev 1644
Correct element size, if block type or variable name is wider than block width.
Previously, if size corrected, element changed position to the right (or down, if height is corrected). Now upper-left corner is fixed.

Thu, 26 Jan 2017 15:38:21 +0300remove non-existed and not necessary self.logger from detecting options in iec2c
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 26 Jan 2017 15:38:21 +0300] rev 1643
remove non-existed and not necessary self.logger from detecting options in iec2c

Mon, 23 Jan 2017 16:22:04 +0300remove Linux target from first_steps example
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 23 Jan 2017 16:22:04 +0300] rev 1642
remove Linux target from first_steps example

Then default target on the system will be used.

Tue, 24 Jan 2017 01:09:54 +01001.2rc1 1.2
Edouard Tisserant 7BB06627 <edouard.tisserant@gmail.com> [Tue, 24 Jan 2017 01:09:54 +0100] rev 1641
1.2rc1

Tue, 24 Jan 2017 01:07:56 +0100closing 1.1 branch 1.1 Korean release
Edouard Tisserant 7BB06627 <edouard.tisserant@gmail.com> [Tue, 24 Jan 2017 01:07:56 +0100] rev 1640
closing 1.1 branch

Thu, 19 Jan 2017 13:56:09 +0300for tests svgui and logging move code from old py_ext.xml to the new pyfile.xml
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 19 Jan 2017 13:56:09 +0300] rev 1639
for tests svgui and logging move code from old py_ext.xml to the new pyfile.xml

Tue, 17 Jan 2017 16:34:24 +0300merge
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 17 Jan 2017 16:34:24 +0300] rev 1638
merge

Tue, 17 Jan 2017 13:30:38 +0300fix IL jumps highlighting in Text Viewer
Surkov Sergey <surkovsv93@gmail.com> [Tue, 17 Jan 2017 13:30:38 +0300] rev 1637
fix IL jumps highlighting in Text Viewer

Mon, 16 Jan 2017 12:22:58 +0300change white background for icons in PouInstanceVariablePanel to transparent
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 16 Jan 2017 12:22:58 +0300] rev 1636
change white background for icons in PouInstanceVariablePanel to transparent

in wxPython 2.8 panel has white background and therefore white
background is appropriate, but in wxPython 3.0 panel has grey
background (on GNU/Linux and on Windows).
Transparent background looks good on both wxPython versions and on all platforms.

Mon, 16 Jan 2017 12:15:20 +0300change white background for project tree element to transparent
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 16 Jan 2017 12:15:20 +0300] rev 1635
change white background for project tree element to transparent

because on GNU/Linux project tree has grey background, therefore
white background looks not good.

Mon, 16 Jan 2017 01:19:58 +0100fix second error message in case of error appearing too early to have a wx frame
Edouard Tisserant 7BB06627 <edouard.tisserant@gmail.com> [Mon, 16 Jan 2017 01:19:58 +0100] rev 1634
fix second error message in case of error appearing too early to have a wx frame

Mon, 16 Jan 2017 01:14:57 +0100fix a side effect of 95ecb26fdc4e
Edouard Tisserant 7BB06627 <edouard.tisserant@gmail.com> [Mon, 16 Jan 2017 01:14:57 +0100] rev 1633
fix a side effect of 95ecb26fdc4e

Fri, 13 Jan 2017 20:05:59 +0300remove old unused .cvsignore
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 13 Jan 2017 20:05:59 +0300] rev 1632
remove old unused .cvsignore

Fri, 13 Jan 2017 19:51:36 +0300fix issue with printing scheme (FBD, LD or SFC) with comment element on GNU/Linux
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 13 Jan 2017 19:51:36 +0300] rev 1631
fix issue with printing scheme (FBD, LD or SFC) with comment element on GNU/Linux

If you draw FBD scheme and place comment on it and then try to print
it, then no wires will be printed and comment box is empty (text is
missing). This happens only for wx.PrinterDC and not on wx.MemoryDC
that is used to draw print preview window in Beremiz IDE.
Looks like a bug in wxPython or wxWidgets.

There were found several workaround for this issue.
1) If some dc.DrawLines call is placed before dc.DrawPolygon, then the
problem is gone.

...
dc.DrawLines(polygon)
dc.DrawPolygon(polygon)
...

2) Reseting DC brush solves the problem as well (see this changeset).

Fri, 13 Jan 2017 16:47:46 +0300detect iec2c options and ieclib path only once during the first build
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 13 Jan 2017 16:47:46 +0300] rev 1630
detect iec2c options and ieclib path only once during the first build

Fri, 13 Jan 2017 15:08:40 +0300attach checkedBlockDict variable to the body object
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 13 Jan 2017 15:08:40 +0300] rev 1629
attach checkedBlockDict variable to the body object

Fri, 13 Jan 2017 15:03:35 +0300fix file header in AboutDialog.py
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 13 Jan 2017 15:03:35 +0300] rev 1628
fix file header in AboutDialog.py

Thu, 12 Jan 2017 14:47:15 +0300update Russian translation
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 12 Jan 2017 14:47:15 +0300] rev 1627
update Russian translation

Thu, 12 Jan 2017 14:37:55 +0300check before program generation whether SFC step, that is referenced
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 12 Jan 2017 14:37:55 +0300] rev 1626
check before program generation whether SFC step, that is referenced
by SFC jump, does exists

Wed, 11 Jan 2017 14:15:45 +0300use translatable descriptions for stadard and additional IEC function
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 11 Jan 2017 14:15:45 +0300] rev 1625
use translatable descriptions for stadard and additional IEC function
blocks from xml files instead of hardcoded in python

Wed, 11 Jan 2017 12:57:40 +0300move code in mki18n.py generated translation strings from custom files into separate function
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 11 Jan 2017 12:57:40 +0300] rev 1624
move code in mki18n.py generated translation strings from custom files into separate function

Wed, 11 Jan 2017 11:40:53 +0300clean search result panel after open another project
Surkov Sergey <surkovsv93@gmail.com> [Wed, 11 Jan 2017 11:40:53 +0300] rev 1623
clean search result panel after open another project

Tue, 10 Jan 2017 13:45:56 +0300fix highlight of search result in Search Result Panel
Surkov Sergey <surkovsv93@gmail.com> [Tue, 10 Jan 2017 13:45:56 +0300] rev 1622
fix highlight of search result in Search Result Panel
Remove previous highlight, after next search result clicked.

Tue, 10 Jan 2017 14:08:49 +0300fix doubling search results in Search Result Panel
Surkov Sergey <surkovsv93@gmail.com> [Tue, 10 Jan 2017 14:08:49 +0300] rev 1621
fix doubling search results in Search Result Panel

After fix local search in SFC POU in 163d3a8, search results tree assemble with "children" branches: results of search in actions anf transitions. Deleted code doubling this search results into one more separate branch, so it's useless.

Thu, 29 Dec 2016 18:41:38 +0300make FindInPouDialog work on Windows with wxPython 2.8
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 29 Dec 2016 18:41:38 +0300] rev 1620
make FindInPouDialog work on Windows with wxPython 2.8

additional fix for changeset 474de7f

Thu, 29 Dec 2016 18:36:00 +0300fix local search in actions and transitions
Surkov Sergey <surkovsv93@gmail.com> [Thu, 29 Dec 2016 18:36:00 +0300] rev 1619
fix local search in actions and transitions

Wed, 28 Dec 2016 19:05:28 +0300convert FindInPouDialog from wx.Frame to wx.Dialog
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 28 Dec 2016 19:05:28 +0300] rev 1618
convert FindInPouDialog from wx.Frame to wx.Dialog

In this case FindInPouDialog Windows isn't listed in windows manager
on Alt-Tab. And it's not shown on top of other applications. For
example, previously the dialog was shown even on top of web browser or
word processor.

Wed, 28 Dec 2016 17:10:04 +0300temporary disable SFC transitions in IL, because matiec can't compile it
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 28 Dec 2016 17:10:04 +0300] rev 1617
temporary disable SFC transitions in IL, because matiec can't compile it

matiec freezes in this case.
See https://bitbucket.org/mjsousa/matiec/issues/58/iec2c-freezes-if-sfc-transition-is-in-il

Wed, 28 Dec 2016 16:33:50 +0300fix issue with creating SFC transitions using ST and IL
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 28 Dec 2016 16:33:50 +0300] rev 1616
fix issue with creating SFC transitions using ST and IL

Beremiz generates text representation for transitions without names.
Therefore transition name in its IL code is not needed.

Mon, 26 Dec 2016 14:01:54 +0300replace '-' with '.' in resource tab and transition/action SFC code
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 26 Dec 2016 14:01:54 +0300] rev 1615
replace '-' with '.' in resource tab and transition/action SFC code


This makes tab names consistent with the way the same information is shown in variable panel.

Mon, 26 Dec 2016 13:49:38 +0300check during program generation whether source signal is defined for single task
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 26 Dec 2016 13:49:38 +0300] rev 1614
check during program generation whether source signal is defined for single task

Fri, 23 Dec 2016 18:40:31 +0300fix strange behavior on Backspace press in ST
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 23 Dec 2016 18:40:31 +0300] rev 1613
fix strange behavior on Backspace press in ST

Before:
if text was selected and cursor was at indention, one indention (two
spaces) was removed.

if cursor was at start position of the line, then nothing happened.

if cursor was in the middle of indention then on backspace more
indention were added


Now:
if text is selected, it will be removed.
if cursor is at start position, then new line will be removed.
if cursor was in the middle of indention one indention is removed.

Thu, 22 Dec 2016 17:39:58 +0300fix close button in system menu for AboutDialog on Windows
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 22 Dec 2016 17:39:58 +0300] rev 1612
fix close button in system menu for AboutDialog on Windows


If SetEscapeId receives wx.ID_CLOSE as parameter, then on Windows with
wxPython 2.8 system close button in title bar stops working.
If wx.ID_CANCEL or wx.ID_OK is used in SetEscapeId call, then close
button works correctly.

Thu, 22 Dec 2016 14:38:56 +0300make renames caseinsensitive
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 22 Dec 2016 14:38:56 +0300] rev 1611
make renames caseinsensitive

Tue, 20 Dec 2016 17:11:36 +0300fix problem with SFC action/transition rename
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 20 Dec 2016 17:11:36 +0300] rev 1610
fix problem with SFC action/transition rename

Traceback (most recent call last):
File "/home/developer/WorkData/PLC/beremiz/beremiz/IDEFrame.py", line
1636, in OnProjectTreeItemEndEdit
elif new_name.upper() in [name.upper() for name in
self.Controler.GetProjectPouVariableNames(pou_name) if name !=
old_name]:
NameError: global name 'pou_name' is not defined

Tue, 20 Dec 2016 14:41:10 +0300fix problem that it was impossible to edit SFC jump, if it references non-existent SFC step
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 20 Dec 2016 14:41:10 +0300] rev 1609
fix problem that it was impossible to edit SFC jump, if it references non-existent SFC step

Tue, 20 Dec 2016 13:26:54 +0300remove all corresponding SFC jumps when SFC step is removed (but only in DRIVENDRAWING_MODE)
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 20 Dec 2016 13:26:54 +0300] rev 1608
remove all corresponding SFC jumps when SFC step is removed (but only in DRIVENDRAWING_MODE)

Tue, 20 Dec 2016 13:26:24 +0300rename all corresponding SFC jumps when SFC step is renamed (but only in DRIVENDRAWING_MODE)
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 20 Dec 2016 13:26:24 +0300] rev 1607
rename all corresponding SFC jumps when SFC step is renamed (but only in DRIVENDRAWING_MODE)

Wed, 14 Dec 2016 13:14:45 +0300add check of new project path in Save As
Sergey Surkov <surkovsv93@gmail.com> [Wed, 14 Dec 2016 13:14:45 +0300] rev 1606
add check of new project path in Save As
add dialog window if selected directory is the current directory project, or already contains another project

Wed, 14 Dec 2016 12:44:30 +0300fix issue that in Debug mode LD instance doesn't show correctly its state after
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 14 Dec 2016 12:44:30 +0300] rev 1605
fix issue that in Debug mode LD instance doesn't show correctly its state after
continuation of FBD_Connector.

Previously state signals doesn't propogate through FBD_Connector.

Wed, 14 Dec 2016 12:36:04 +0300fix issue with task rename if "Name" column label is translated into
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 14 Dec 2016 12:36:04 +0300] rev 1604
fix issue with task rename if "Name" column label is translated into
other language

Wed, 14 Dec 2016 12:31:06 +0300fix issue with compiling SFC POU with non-connected transition (type "connection")
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 14 Dec 2016 12:31:06 +0300] rev 1603
fix issue with compiling SFC POU with non-connected transition (type "connection")

Tue, 13 Dec 2016 17:47:34 +0300fix bug with recent projects menu, remove path to the project from menu, if project directory doesn't exist
Sergey Surkov <surkovsv93@gmail.com> [Tue, 13 Dec 2016 17:47:34 +0300] rev 1602
fix bug with recent projects menu, remove path to the project from menu, if project directory doesn't exist

Tue, 13 Dec 2016 17:40:03 +0300fix bug with empty directories in recent projects menu
Sergey Surkov <surkovsv93@gmail.com> [Tue, 13 Dec 2016 17:40:03 +0300] rev 1601
fix bug with empty directories in recent projects menu
remove path to a project from recent projects menu, if project directory is empty

Mon, 12 Dec 2016 14:29:40 +0300fix list of recent projects in File menu, add path to current project after Save As
Sergey Surkov <surkovsv93@gmail.com> [Mon, 12 Dec 2016 14:29:40 +0300] rev 1600
fix list of recent projects in File menu, add path to current project after Save As

Thu, 08 Dec 2016 17:54:43 +0300by default init input and output in step sfc block, and output for initial step sfc block
Sergey Surkov <surkovsv93@gmail.com> [Thu, 08 Dec 2016 17:54:43 +0300] rev 1599
by default init input and output in step sfc block, and output for initial step sfc block

Wed, 07 Dec 2016 19:28:13 +0300update PLC status after initialization
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 19:28:13 +0300] rev 1598
update PLC status after initialization

This is necessary especially if existed PLC program is loaded, but PLC
is not started automatically. In this case taskbar icon shows that PLC
isn't empty.

Wed, 07 Dec 2016 19:25:58 +0300always load existing PLC program from the working directory
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 19:25:58 +0300] rev 1597
always load existing PLC program from the working directory

Wed, 07 Dec 2016 19:24:16 +0300stop PLC before unloading
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 19:24:16 +0300] rev 1596
stop PLC before unloading


This fixes segmentation fault if service was quit without stopping it.
It has happened if Beremiz service was quit using taskbar icon or by
closing Beremiz IDE (in case of autostarted local service).

In second case to trigger the bug following step has to be done:
1. Open Beremiz IDE
2. Open project, compile and connect to LOCAL:// runtime
3. Transfer and start the PLC program
4. Open other project without disconneting the PLC runtime
5. Close Beremiz IDE

Wed, 07 Dec 2016 18:32:34 +0300add internatialization support for Beremiz_service.py
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 18:32:34 +0300] rev 1595
add internatialization support for Beremiz_service.py

Wed, 07 Dec 2016 18:25:37 +0300fix issue with changing annonced Pyro service name via taskbar icon
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 18:25:37 +0300] rev 1594
fix issue with changing annonced Pyro service name via taskbar icon

Wed, 07 Dec 2016 18:23:59 +0300don't crash on trying to change IP interface for Beremiz_service using taskbar icon if IP wasn't previously
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 18:23:59 +0300] rev 1593
don't crash on trying to change IP interface for Beremiz_service using taskbar icon if IP wasn't previously


By default IP is not set (None) and service listen only on localhost interface.

Wed, 07 Dec 2016 18:15:04 +0300start/stop from taskbar icon only if PLC is stopped/started
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 18:15:04 +0300] rev 1592
start/stop from taskbar icon only if PLC is stopped/started

Wed, 07 Dec 2016 17:54:41 +0300close Pyro socket after daemon stop
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 17:54:41 +0300] rev 1591
close Pyro socket after daemon stop


without that socket port is open after daemon shutdown.
As a result if you restart daemon with new settings (service name, for example),
it can't listen on already used port and opens the next free TCP port
regardless of requested settings.

Wed, 07 Dec 2016 17:51:20 +0300add python-wxgtk3.0 support to Beremiz_service.py
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 17:51:20 +0300] rev 1590
add python-wxgtk3.0 support to Beremiz_service.py

Fri, 02 Dec 2016 17:48:26 +0300make about dialog on Windows not so big
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 02 Dec 2016 17:48:26 +0300] rev 1589
make about dialog on Windows not so big


It was automatically expanded to place description in one line.

Thu, 01 Dec 2016 18:31:10 +0300update Russian translation
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 01 Dec 2016 18:31:10 +0300] rev 1588
update Russian translation

Thu, 01 Dec 2016 18:30:34 +0300add i18n to PLC status
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 01 Dec 2016 18:30:34 +0300] rev 1587
add i18n to PLC status

Extra strings are added to the code to make mki18n.py to find these
strings in source files and put them into i18n/messages.pot.

Thu, 01 Dec 2016 16:59:16 +0300remove clear and reset execution order buttons in popup menu in SFC and LD viewers.
Sergey Surkov <surkovsv93@gmail.com> [Thu, 01 Dec 2016 16:59:16 +0300] rev 1586
remove clear and reset execution order buttons in popup menu in SFC and LD viewers.

Thu, 01 Dec 2016 16:52:28 +0300fix initial(equal to the min) number of sequences in SFC Divergence dialog.
Sergey Surkov <surkovsv93@gmail.com> [Thu, 01 Dec 2016 16:52:28 +0300] rev 1585
fix initial(equal to the min) number of sequences in SFC Divergence dialog.

Thu, 01 Dec 2016 16:40:49 +0300make only correct blocks(by IEC 61131-3 standard) available in wire popup menu in SFC Viewer
Sergey Surkov <surkovsv93@gmail.com> [Thu, 01 Dec 2016 16:40:49 +0300] rev 1584
make only correct blocks(by IEC 61131-3 standard) available in wire popup menu in SFC Viewer

Wed, 30 Nov 2016 14:27:18 +0300move EnhancedStatusBar.py to the right location
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 30 Nov 2016 14:27:18 +0300] rev 1583
move EnhancedStatusBar.py to the right location

Tue, 29 Nov 2016 11:41:09 +0300add internatialization support to startup messages during checking software updates
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 29 Nov 2016 11:41:09 +0300] rev 1582
add internatialization support to startup messages during checking software updates

Mon, 28 Nov 2016 16:47:01 +0300fix translation strings with multiple parameters
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 28 Nov 2016 16:47:01 +0300] rev 1581
fix translation strings with multiple parameters


this fixes a lot of warnings given by msgmerge:

../PLCOpenEditor.py:196: warning: 'msgid' format string with unnamed arguments cannot be properly localized:
The translator cannot reorder the arguments.
Please consider using a format string with named arguments,

Mon, 28 Nov 2016 16:27:24 +0300change bug report address for PLCOpenEditor to beremiz-devel@lists.sourceforge.net
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 28 Nov 2016 16:27:24 +0300] rev 1580
change bug report address for PLCOpenEditor to beremiz-devel@lists.sourceforge.net

make error message to be the same as in Beremiz IDE

Mon, 28 Nov 2016 16:12:27 +0300fix segmentation fault on clicking red point in compilation console if that compilation error coverts several units in plcopen file
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 28 Nov 2016 16:12:27 +0300] rev 1579
fix segmentation fault on clicking red point in compilation console if that compilation error coverts several units in plcopen file

closes #11

Thu, 24 Nov 2016 18:33:56 +0300add localization to time strings in DebugVariablePanel and to dialog shown after variable drag'n'drop
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 24 Nov 2016 18:33:56 +0300] rev 1578
add localization to time strings in DebugVariablePanel and to dialog shown after variable drag'n'drop

Thu, 24 Nov 2016 15:46:17 +0300fix issue that if located variable was dropped in location column, then address was changed in wrong row (row - 1).
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 24 Nov 2016 15:46:17 +0300] rev 1577
fix issue that if located variable was dropped in location column, then address was changed in wrong row (row - 1).

It's not neccessary to carry about label size. YToRow() does the work.

Thu, 24 Nov 2016 15:37:03 +0300increase size for time buttons in LogViewer
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 24 Nov 2016 15:37:03 +0300] rev 1576
increase size for time buttons in LogViewer

The buttons are slightly bigger now. This gives more space for label
translations in other languages.
closes #12

Thu, 24 Nov 2016 13:17:06 +0300don't rebuild the makefile based project if only companyName, projectName or productName are changed
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 24 Nov 2016 13:17:06 +0300] rev 1575
don't rebuild the makefile based project if only companyName, projectName or productName are changed

And this fix current encoding issues, because all these information fields can
contain non-latin characters.

Tue, 22 Nov 2016 18:42:48 +0300add progress bar to status bar
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 22 Nov 2016 18:42:48 +0300] rev 1574
add progress bar to status bar

It can be used to display progress during program upload.
To use it call ShowPLCProgress (like ShowPLCProgress("transfered",
10)) in your PLCObject implementation.

Sat, 19 Nov 2016 23:42:49 +0100fix warning: 'return' with no value in function startPLC
ctbenergy <ewald.weinahndl@gmail.com> [Sat, 19 Nov 2016 23:42:49 +0100] rev 1573
fix warning: 'return' with no value in function startPLC