Better error handling when blob transfer fail

Removed dead code.

Now expects 1 more columns in VARIABLE.CSV file generated by MatIEC. Pair with MatIEC commit 9cb7c8bf7dbc :
Add a column to VARIABLES.CSV, containing variable (derived) type name, additionally to current last column contyaining base type name

Merged workaround for loading bug happening after automatic resize of function blocks. It appears that some code in GraphicCommons.py loop endlessly when wires coordinate do not align with x or y axis. Those erroneous coordinate are now filtered out when loaded in the view.

Removed debug code and closed branch

GraphicCommons.py : Wire.SetPoints() move filtering before computation of Start and End points to avoid setting them with arbitrary directions.

GraphicCommons.py : rewrote Wire.Setpoints.
- trying to make it fix diagonal wires,
- wasn't clear what was intended before, so made it clear :
- duplicate point removal
- segment merging (only if asked)
- remove corners made of opposite direction segments

'Change POU Type To' becomes 'Duplicate as...', avoiding side effects of type change when POU is already instanciated. Also remove leftover returType tag in ex-function POUs, triggering exceptions at build time.

Fix PLCObject's purge failing silently with extra_files.

LogMessage shouldn't be serialized (can lead to blocking in case of exception in main thread), and do not require it.

Fixed typo leading to some exception in some rare corner cases in worker.py

Added missing 'path' field to WAMP addresses in URI editor.

Fixed exception when using URI editor for PYRO addresses

Avoid loading PLC at startup when autostart is not set in command line. As a side effect PLC status is artificially set to Stopped, and StartPLC eventually loads PLC if it is not already loaded.

Add Repair() to WAMP interface

Merged fix_PLC_runtime_shutdown

Close fix_PLC_runtime_shutdown

Runtime worker : unblock the last waiting job and prevent any new job to wait when Main Worker is being shut down.

Add some "pipe to self" trick in Pyro server to accelerate runtime shutdown instead of waiting for arbitrary pyro timeout.

If call to GetPLCstatus can't be executed in PLC, then obtained status is disconnected. Status on "None" is not relevant anymore, and is replaced by Disconnected.

Enure that all threads are joined before trying to exit

Named runtime's threads to ease debugging

Added Repair() png icon

pep8 again...
./connectors/PYRO/PSK_Adapter.py:49:1: E302 expected 2 blank lines, found 1
./connectors/PYRO/PSK_Adapter.py:57:5: E303 too many blank lines (2)

PEP8 fix : ./connectors/PYRO/PSK_Adapter.py:49:1: E302 expected 2 blank lines, found 1

Added RepairPLC() to PLCObject. For now just calling PurgePLC and quit PLC runtime.

Ensure Beremiz_service.py quits properly when Main Worker stops and wa are using Wx and/or Twisted.

Added PurgePLC() method to PLCObject, to be invoked when PLC Status is broken. It clears PLC shared object an extra files and force status to Empty. Added correponding Repair button to toolbar, visible only when PLC status is broken.

Background erase of debug variable panel was disabled for some reason, and it not anymore compatible with EVT_PAINT based refresh. It was leaving traces behind when removing traced variable. Fixed.

force redraw only through EVT_PAINT event and use wxPaintDC, as described in wx documentation

Fixed refresh problem following 9c5f835b031e, 9622418ac28c, c67488bd8134 : force redraw only through EVT_PAINT event and use wxPaintDC, as described in wx documentation

merged

Nicer name than 'var_name' for variable auto-renaming in Modbus

Allow starting IDE without sslpsk module installed. Fail when connecting to PYROS if sslpsk unavailable.

Fixed preview drawing/refresh problem in sfc/ld/fbd graphical element creation dialogs on windows (introduced in 9c5f835b031e, continuation of 9622418ac28c)

pep8 white spaces

Now default_evaluator is provided by runtime package

merge

Continue fixing deadlock of previous commit, this time occuring when waiting for 'cleanup' python runtime call to finish. Now 'init' and 'cleanup' python runtime calls are called directly from main thread, and aren't anymore invoked in the context of wxMainloop and/or twisted reactor.

Fix deadlock when indirectly calling PLCObject's evaluator() from twisted of wx event loops. Was freezing while transfer/start/stop through Wamp. Serialize all PLCObject's call to self.PythonRuntimeCall into the same PythonThread thread.

Fixed Wamp assertion because of unexpected type

Enhanced statistics display code, used it and saw no more noticable leak while editing. Closing branch.

Conform to pep8 and pylint :

pep8 version: 2.3.1
./ConfigTreeNode.py:130:49: E231 missing whitespace after ','
./editors/Viewer.py:643:24: E128 continuation line under-indented for visual indent
./editors/Viewer.py:670:12: E221 multiple spaces before operator
./editors/Viewer.py:671:13: E221 multiple spaces before operator
./editors/Viewer.py:2138:52: E203 whitespace before ':'
./editors/Viewer.py:2139:66: W291 trailing whitespace
./controls/VariablePanel.py:154:25: E231 missing whitespace after ','
./controls/LocationCellEditor.py:88:1: W293 blank line contains whitespace
./controls/LocationCellEditor.py:191:25: E221 multiple spaces before operator
./controls/LocationCellEditor.py:200:17: E128 continuation line under-indented for visual indent

pylint 1.8.3,
************* Module controls.LocationCellEditor
controls/LocationCellEditor.py:200: [C0330(bad-continuation), ] Wrong continued indentation (add 9 spaces).
_("Selected location is identical to previous one"))
^ |
************* Module controls.VariablePanel
controls/VariablePanel.py:154: [E1601(print-statement), VariableTable.SetValue] print statement used
************* Module editors.Viewer
editors/Viewer.py:643: [C0330(bad-continuation), ] Wrong continued indentation (add 1 space).
self.GetAddMenuCallBack(self.AddNewComment))
^|
editors/Viewer.py:598: [W0612(unused-variable), Viewer.AddDivergenceMenuItems] Unused variable 'add_branch'
editors/Viewer.py:1655: [E0602(undefined-variable), Viewer.PopupConnectionMenu] Undefined variable 'variable_type'
editors/Viewer.py:1649: [W0612(unused-variable), Viewer.PopupConnectionMenu] Unused variable 'connection_type'
************* Module connectors.PYRO.PSK_Adapter

Merged

Fix typo in README.md

Closes #80

merged rename_on_location_change branch

Rename checkbox and immediately apply.
Added a checkbox in Location selection dialog (saved as user settings) to let user choose if variable is being renamed.
Also forced closing celle editor once new location is selected.

LocationCellEditor use better source for variable name replacement, and validate variable name before applying it or complains otherwise.

LocationCellEditor now systematically change variable name according to name given by CTN, calls VariablePanel' OnVariableNameChange to update POU accordingly.

Fix problem introduced in 9c5f835b031e : Exception in LDPowerRailDialog.py because of change in OnPaint/RefreshView/DrawPreview.

Fixed RecentProjectMenu in BeremizIDE.py broken by untested changes in wx.NewID_abuse_fix.

Merged wx.NewID_abuse_fix branch

More wx.NewID abuse removal. This time BeremizIDE.py was cleaned.

Merged more of wx.NewID_abuse_fix branch

More wx.NewID abuse removal. All Viewer.py got cured.

More wx.NewID abuse removal. This one was apparently silently unbinding toolbar butons when running out of mew wx IDs.

Dyslectic typos

Close branch py3-fix.

Close branch 1.1 Korean release.

Close branch generate-button.

close #2486 head

Close branch nevow_service_rework.

Close branch wx3-fix.

Intermediate merge of wx.NewID_abuse_fix branch but kept debug code in the branch. This is still work in progress, banch is NOT closed.

Continued wx.NewID abuse removal in Viewer.py : Added AppendItem to use instead of AppendMenu, made examples with AddBlockPinMenuItems and AddAlignmentMenuItems

Continued wx.NewID abuse removal in Viewer.py : get rid of one call to AppendMenu method, having no real purpose apparently. To be continued.

Start fixing wx.NewId abuse in viewer.py. This shows how to avoid using AppendMenu() function, definitely useless.

VariablePanel's menu do not waste Wx IDs anymore (directly binds wx objects rather than crating new ID wit wx.NewId)

Instrument IDE code to find code abusing wx.NewId.

Fix error when searching accross project. Collection of result wasn't initialized and was failing in case some CTN was returning no result.

Make spaghetti-code-quality great again.

Merged

Add Docker files to build containers to run automated tests

merge

check_source.sh: fix sed error: -e expression #1, char 25: Invalid range end

Warning happen only if old sed (4.4) is used.

Fix pylint warning [C0325(superfluous-parens), ] Unnecessary parens after u'if' keyword

************* Module runtime.PLCObject
runtime/PLCObject.py:609: [C0325(superfluous-parens), ] Unnecessary parens after u'if' keyword

Update Beremiz dependencies because of added PYROS:// support

Fix header and convert comments to docstrings in PSK_Adapter

Fix Pyro work with SSL wrapper (sslpsk)

Following error was shown in Beremiz console:
PYRO connecting to URI : PYROS://127.0.0.1:3001#beremiz
Exception while connecting to 'PYROS://127.0.0.1:3001#beremiz': non-zero flags not allowed in calls to recv() on <class 'ssl.SSLSocket'>
Connection failed to PYROS://127.0.0.1:3001#beremiz!

Reason is that Pyro calls socket recv() with MSGWAITALL flag, that causes ValueError exception.

https://docs.python.org/2/library/ssl.html
recv(), recv_into() (but passing a non-zero flags argument is not allowed)

Fix crash in runtime if PSK secret is missing

./Beremiz_service.py -s $PWD/psk2.txt -n beremiz /tmp/beremiz
Beremiz_service: 1.2-1378c18402c3+

Traceback (most recent call last):
File "./Beremiz_service.py", line 511, in <module>
ensurePSK(servicename, PSKpath)
File "/home/developer/WorkData/PLC/beremiz/beremiz/runtime/Stunnel.py", line 32, in ensurePSK
PSKgen(ID, PSKpath)
File "/home/developer/WorkData/PLC/beremiz/beremiz/runtime/Stunnel.py", line 23, in PSKgen
call(restart_stunnel_cmdline)
File "/home/developer/WorkData/PLC/beremiz/beremiz/runtime/spawn_subprocess.py", line 116, in call
pid = posix_spawn.posix_spawnp(cmd[0], cmd)
File "/home/developer/.local/lib/python2.7/site-packages/posix_spawn/_impl.py", line 120, in posix_spawnp
return _posix_spawn(lib.posix_spawnp, *args, **kwargs)
File "/home/developer/.local/lib/python2.7/site-packages/posix_spawn/_impl.py", line 111, in _posix_spawn
_check_error(res, path)
File "/home/developer/.local/lib/python2.7/site-packages/posix_spawn/_impl.py", line 10, in _check_error
raise OSError(errno, os.strerror(errno), path)
OSError: [Errno 2] No such file or directory: '/etc/init.d/S50stunnel'

Update build instruction for BACNet in README

in r3189 Steve added new feature to bacnet-stack: network port - to
access configuration and properties of network ports of a device.
https://sourceforge.net/p/bacnet/code/3189/

It's not implemented by Beremiz.

Replace md5 module with hashlib

fix following pylint error:

************* Module connectors.ConnectorBase
connectors/ConnectorBase.py:7: [W1648(bad-python3-import), ] Module moved in Python 3
************* Module runtime.PLCObject
runtime/PLCObject.py:33: [W1648(bad-python3-import), ] Module moved in Python 3

Remove execute attributes from runtime/PLCObject.py

Fix typo

Fix various pylint and pep8 errors

Check basic code-style problems for PEP-8
pep8 version: 2.4.0
./connectors/PYRO/__init__.py:57:43: E261 at least two spaces before inline comment
./connectors/SchemeEditor.py:29:21: E128 continuation line under-indented for visual indent
./controls/IDBrowser.py:101:23: E127 continuation line over-indented for visual indent
./controls/IDBrowser.py:102:23: E127 continuation line over-indented for visual indent

Check for problems using pylint ...
No config file found, using default configuration
pylint 1.9.4,
astroid 1.6.5
Python 2.7.16rc1 (default, Feb 18 2019, 11:05:09)
[GCC 8.2.0]
Use multiple threads for pylint
Using config file /home/developer/WorkData/PLC/beremiz/beremiz/.pylint
************* Module connectors.PYRO_dialog
connectors/PYRO_dialog.py:9: [W0611(unused-import), ] Unused import wx
************* Module connectors
connectors/__init__.py:32: [W1652(deprecated-types-field), ] Accessing a deprecated fields on the types module
connectors/__init__.py:32: [C0411(wrong-import-order), ] standard import "from types import ClassType" should be placed before "from connectors.ConnectorBase import ConnectorBase"
************* Module connectors.PYRO.PSK_Adapter
connectors/PYRO/PSK_Adapter.py:7: [C0411(wrong-import-order), ] standard import "import ssl" should be placed before "import sslpsk"
************* Module connectors.SchemeEditor
connectors/SchemeEditor.py:29: [C0330(bad-continuation), ] Wrong continued indentation (add 1 space).
wx.ALIGN_CENTER_VERTICAL),
^|
connectors/SchemeEditor.py:42: [W0631(undefined-loop-variable), SchemeEditor.__init__] Using possibly undefined loop variable 'tag'
************* Module runtime.WampClient
runtime/WampClient.py:138: [W1612(unicode-builtin), WampSession.onJoin] unicode built-in referenced
runtime/WampClient.py:154: [W1612(unicode-builtin), WampSession.publishWithOwnID] unicode built-in referenced
runtime/WampClient.py:346: [W1612(unicode-builtin), PublishEvent] unicode built-in referenced
runtime/WampClient.py:351: [W1612(unicode-builtin), PublishEventWithOwnID] unicode built-in referenced
runtime/WampClient.py:31: [W0611(unused-import), ] Unused str imported from builtins as text
************* Module runtime.PLCObject
runtime/PLCObject.py:35: [W1648(bad-python3-import), ] Module moved in Python 3
runtime/PLCObject.py:35: [C0411(wrong-import-order), ] standard import "import md5" should be placed before "from six.moves import xrange"
runtime/PLCObject.py:36: [C0411(wrong-import-order), ] standard import "from tempfile import mkstemp" should be placed before "from six.moves import xrange"
runtime/PLCObject.py:37: [C0411(wrong-import-order), ] standard import "import shutil" should be placed before "from six.moves import xrange"
runtime/PLCObject.py:38: [C0411(wrong-import-order), ] standard import "from functools import wraps, partial" should be placed before "from six.moves import xrange"
************* Module runtime.Worker
runtime/Worker.py:12: [W1648(bad-python3-import), ] Module moved in Python 3
************* Module runtime.spawn_subprocess
runtime/spawn_subprocess.py:125: [C0325(superfluous-parens), ] Unnecessary parens after 'print' keyword
runtime/spawn_subprocess.py:130: [C0325(superfluous-parens), ] Unnecessary parens after 'print' keyword
runtime/spawn_subprocess.py:125: [E1601(print-statement), ] print statement used
runtime/spawn_subprocess.py:130: [E1601(print-statement), ] print statement used
************* Module controls.IDBrowser
controls/IDBrowser.py:101: [C0330(bad-continuation), ] Wrong continued indentation (remove 5 spaces).
if self.isManager
| ^
controls/IDBrowser.py:102: [C0330(bad-continuation), ] Wrong continued indentation (remove 5 spaces).
else dv.DATAVIEW_CELL_INERT),
| ^
************* Module Beremiz_service
Beremiz_service.py:34: [W0611(unused-import), ] Unused import __builtin__

Fix invalid python3 syntax

Syntax checking using python3 ...
Python 3.7.2+
File "./connectors/PYRO/__init__.py", line 76
except Exception, e:
^
SyntaxError: invalid syntax

Syntax error in ./connectors/PYRO/__init__.py
File "./connectors/PYRO/PSK_Adapter.py", line 40
except ProtocolError, x:
^
SyntaxError: invalid syntax

Syntax error in ./s.py
File "./runtime/Worker.py", line 67
raise _job.exc_info[0], _job.exc_info[1], _job.exc_info[2]
^
SyntaxError: invalid syntax

Exclude pyjslib.py from python3 syntax correction check

pyjs doesn't support python3 and it's unmaintained.
async is a new keyword introduced in python 3.7.

./tests/tools/check_source.sh
Syntax checking using python3 ...
Python 3.7.2+

Syntax error in ./runtime/Worker.py
File "./svgui/pyjs/lib/pyjslib.py", line 24
def import_module(path, parent_module, module_name, dynamic=1, async=False):
^
SyntaxError: invalid syntax

revert occasionally committed changed first_steps project.

project was changed by commit:
update translations from https://www.transifex.com/beremiz/beremiz-ide (756d02cf78db)

Merged in masterschlumpf/beremiz/generate-button (pull request #38)

"Generate Prgram" button

Approved-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>

Create a "Generate Program As..." menu to make the "Generate Program" toolbutton even more useful.

The behaviour is the same as "Save" and "Save As...". Now "Generate Program" uses the last filename
if known and "Generate Progam As..." asks every time.

Add "Generate Program" to toolbar in PLCOpenEditor standalone mode.

Currently you can find the "Generate Program" action only in the file menu,
but this action is very often used in standalone mode, so I added toolbuffon.

Merged search in CTN branch

Finished adding search in python and C files. Stripped debug code and useless comments. Close branch

WIP adding searching capabilities in python files. was done :
- added search in body of Code File Tree Nodes (moved editor code so that we CTN search can have the same sections text layout as editor to search in)

WIP adding searching capabilities in python files. was done :
- added search in global variables used by Code File Tree Nodes

WIP adding searching capabilities in python files. was done :
- fixed highlighting search result in text body of CTN code editor.

WIP adding searching capabilities in python files. was done :
- change stub search results to trigger highlighting un variable panel
- trying to highlight in CTN code file editors -> problem with EditorPanel not having self.VariableEditor set...
- added highlight capability to CTN's CodeFileEditor's VariablePanel

WIP adding searching capabilities in python files. was done :
- fixed stub CTN search results so that they can be accepted by search result panel
- worked on search result panel so that it can display those CTN results
- made search result panel display correctly stub search result, for variables and body matches
- EditProjectElement now opens CTN node as well as PlcOpen project nodes

WIP adding searching capabilities in python files:
- Added recursive Search capability to config tree nodes
- Added stub search to code editors, for test

Fixed more pylint reports :
connectors/__init__.py:31: [W1652(deprecated-types-field), ] Accessing a deprecated fields on the types module
in fact, it should have been unused import.

Long due merge

Fix backtrace on printing localized (non-ascii) error message in PLCGenerator.

traceback:
File "C:\Beremiz\targets\st\beremiz\..\..\..\beremiz\beremiz\BeremizIDE.py", line 811, in OnMenu
getattr(self.CTR, method)()
File "C:\Beremiz\targets\st\beremiz\..\..\..\beremiz\beremiz\ProjectController.py", line 1134, in _Build
IECGenRes = self._Generate_SoftPLC()
File "C:\Beremiz\targets\st\beremiz\..\..\..\beremiz\beremiz\ProjectController.py", line 746, in _Generate_SoftPLC
if self._Generate_PLC_ST():
File "C:\Beremiz\targets\st\beremiz\..\..\..\beremiz\beremiz\ProjectController.py", line 763, in _Generate_PLC_ST
self._getIECgeneratedcodepath())
File "C:\Beremiz\targets\st\beremiz\..\..\..\beremiz\beremiz\PLCControler.py", line 466, in GenerateProgram
errors.append(str(ex))
<type 'exceptions.UnicodeEncodeError'>: 'ascii' codec can't encode characters in position 0-9: ordinal not in range(128)
Fix backtrace on printing localized (non-ascii) error message in PLCGenerator.

traceback:
File "C:\Beremiz\targets\st\beremiz\..\..\..\beremiz\beremiz\BeremizIDE.py", line 811, in OnMenu
getattr(self.CTR, method)()
File "C:\Beremiz\targets\st\beremiz\..\..\..\beremiz\beremiz\ProjectController.py", line 1134, in _Build
IECGenRes = self._Generate_SoftPLC()
File "C:\Beremiz\targets\st\beremiz\..\..\..\beremiz\beremiz\ProjectController.py", line 746, in _Generate_SoftPLC
if self._Generate_PLC_ST():
File "C:\Beremiz\targets\st\beremiz\..\..\..\beremiz\beremiz\ProjectController.py", line 763, in _Generate_PLC_ST
self._getIECgeneratedcodepath())
File "C:\Beremiz\targets\st\beremiz\..\..\..\beremiz\beremiz\PLCControler.py", line 466, in GenerateProgram
errors.append(str(ex))
<type 'exceptions.UnicodeEncodeError'>: 'ascii' codec can't encode characters in position 0-9: ordinal not in range(128)


Close #67

Fix crash if LD input contact isn't connected

Traceback (most recent call last):
File "/home/developer/WorkData/PLC/beremiz/beremiz/BeremizIDE.py", line 339, in OnMethod
obj.CTR.CallMethod('_'+meth)
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 1996, in CallMethod
getattr(self, method)()
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 1134, in _Build
IECGenRes = self._Generate_SoftPLC()
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 746, in _Generate_SoftPLC
if self._Generate_PLC_ST():
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 763, in _Generate_PLC_ST
self._getIECgeneratedcodepath())
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCControler.py", line 456, in GenerateProgram
self.ProgramChunks = GenerateCurrentProgram(self, self.Project, errors, warnings)
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 1762, in GenerateCurrentProgram
generator.GenerateProgram()
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 478, in GenerateProgram
self.GeneratePouProgram(pou_name)
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 260, in GeneratePouProgram
program = pou_program.GenerateProgram(pou)
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 1718, in GenerateProgram
self.ComputeProgram(pou)
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 1028, in ComputeProgram
self.GenerateBlock(instance, block_infos, body, None)
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 1144, in GenerateBlock
expression = self.ComputeExpression(body, connections, executionOrderId > 0)
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 1373, in ComputeExpression
paths = self.GeneratePaths(connections, body, order, to_inout)
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 1344, in GeneratePaths
elif isinstance(result[0], list):
IndexError: list index out of range


Close #70

Fix section styling in code editor (python and c extensions) if non-latin symbols are used in the code

Problem exists even if non-latin characters are placed in comments.
Close #76

update localization template

merge

updated list of translators

update translations from https://www.transifex.com/beremiz/beremiz-ide

added Basque (eu) and Vietnamese (Viet Nam) (vi_VN) translations

Add SpinButtons for integer and floating point variables in ForceVariableDialog

it allows to change variable value using only mouse.

Fix non-marking as manually forced floating point variable if the value isn't integer

For example, if user in debug variable panel set any floating point
variable to 34.3, then it's not shown as forced (blue color) and user
can't release this enforcement.

If user changes the value to 34.0, then enforcement shows
correctly. This is done because binary representation of floating point
numbers in IDE and runtime can be slightly different (double vs float)
and as a result values aren't equal.

Don't close ForceVariableDialog if user entered wrong new value

return back to edit field in this case

Additional fix for rewrite ForceVariableDialog commit (9076249f)

fix following backtrace:

Traceback (most recent call last):
File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk3/wx/_core.py", line 16765, in <lambda>
lambda event: event.callable(*event.args, **event.kw) )
File "/home/developer/WorkData/PLC/beremiz/beremiz/controls/DebugVariablePanel/DebugVariableViewer.py", line 232, in HandleButton
button.ProcessCallback()
File "/home/developer/WorkData/PLC/beremiz/beremiz/controls/DebugVariablePanel/GraphButton.py", line 156, in ProcessCallback
self.Callback()
File "/home/developer/WorkData/PLC/beremiz/beremiz/controls/DebugVariablePanel/DebugVariableViewer.py", line 350, in OnForceButton
self.ForceValue(self.ItemsDict.values()[0])
File "/home/developer/WorkData/PLC/beremiz/beremiz/controls/DebugVariablePanel/DebugVariableViewer.py", line 428, in ForceValue
dialog.GetValue())
File "/home/developer/WorkData/PLC/beremiz/beremiz/dialogs/ForceVariableDialog.py", line 232, in GetValue
return GetTypeValue[self.IEC_Type](wx.TextEntryDialog.GetValue(self))
TypeError: unbound method GetValue() must be called with TextEntryDialog instance as first argument (got ForceVariableDialog instance instead)

Fix redraw problems in preview frames and debug panel

The problem was that direct call of RefreshView (now DrawView) doesn't
generate EVT_PAINT (at least on GNU/Linux with Wayland and wxgtk build
with gtk3+ support).
Now RefreshView simply triggers EVT_PAINT and EVT_PAINT handler does actual work.

Rewrite ForceVariableDialog. It's not based on wx.TextEntryDialog

Don't customize standard wx.TextEntryDialog on the fly, implement your
own dialog for that with expected behavior and without any hacks.

merge updates to modbus/mb_runtime.c

fix 'SaveAs' in case of overwriting existing project

Traceback (most recent call last):
File "/home/developer/WorkData/PLC/beremiz/beremiz/BeremizIDE.py", line 959, in OnSaveProjectAsMenu
self.CTR.SaveProjectAs()
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 600, in SaveProjectAs
self.SaveProject(old_project_path)
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 579, in SaveProject
self._getProjectFilesPath(self.ProjectPath))
File "/usr/lib/python2.7/shutil.py", line 200, in copytree
os.makedirs(dst)
File "/usr/lib/python2.7/os.py", line 157, in makedirs
mkdir(name, mode)
OSError: [Errno 17] File exists: '/tmp/tests/project_files'

fix 'SaveAs' to non-empty directory and directory without write permissions

fix problems with recursive beremiz.h inclusion

remove LogMessage prototype from plc_main_head.c

it's not needed, because prototype is included in beremiz.h
But it caused problems with TARGET_LOGGING_DISABLE.

merge

Make online debug optional

It could be useful for very small targets like Atmega (Arduino) and
for target bring-up there developer want to have running PLC program,
but has not implemented runtime communication yet.


TARGET_DEBUG_AND_RETAIN_DISABLE - completely disable debug and retain
functionality. Previously named TARGET_DEBUG_DISABLE.

TARGET_ONLINE_DEBUG_DISABLE - can be used to enable retain
functionality (no define TARGET_DEBUG_AND_RETAIN_DISABLE is used), but disable
online debug with corresponding RAM/FLASH overhead.

TARGET_LOGGING_DISABLE - disables logging functionality from runtime and PLC program

TARGET_EXT_SYNC_DISABLE - disables PLC program synchronization with
external events. For example, it could be used to synchronize several
PLCs that control motors for different axes.

By default all these options are off.

To test generate program for Generic target, put following files in
project files directory and run build.sh after generating PLC program.
This is very easy to integrate into makefile (Generic target).

[------------- build.sh --------------------------]
files=$(find $PWD/../build -iname '*.c' | grep -v POUS.c)
arm-none-eabi-gcc \
-DTARGET_DEBUG_AND_RETAIN_DISABLE \
-DTARGET_ONLINE_DEBUG_DISABLE \
-DTARGET_LOGGING_DISABLE \
-DTARGET_EXT_SYNC_DISABLE \
-flto -ffunction-sections -fdata-sections -I../../../../matiec/lib/C \
$files \
main.c \
-Wl,--Map=./program.map,--cref \
-nodefaultlibs --specs=nano.specs -Wl,--static -Wl,--gc-section -Wl,--start-group -lc -lm -lnosys -lgcc -Wl,--end-group
[------------------------------------------------]

[------------- main.c --------------------------]
#ifndef TARGET_DEBUG_AND_RETAIN_DISABLE
void Retain(void){}
void InValidateRetainBuffer(void){}
void ValidateRetainBuffer(void){}
#endif

extern void __run(void);
int main(void)
{
for(;;) {
__run();
// sleep common_ticktime__ ns
// add common_ticktime__ ns to __CURRENT_TIME
}
return 0;
}
[------------------------------------------------]

Disable Python extension in First steps example

use pregenerated CRC32 lookup tables for retain on Win32 and GNU/Linux

This code could be possible reused on low-end targets with limited RAM.

code to generate lookup table:
[---------------------------------------------------------------------]

/* CRC lookup table and initial state. */
uint32_t crc32_table[256];

/* Generate CRC32 lookup table. */
void GenerateCRC32Table(void)
{
unsigned int i, j;
/* Use CRC-32-IEEE 802.3 polynomial 0x04C11DB7 (bit reflected). */
uint32_t poly = 0xEDB88320;

for (i = 0; i <= 0xFF; i++)
{
uint32_t c = i;
for (j = 0 ; j < 8 ; j++)
c = (c & 1) ? (c >> 1 ) ^ poly : (c >> 1);
crc32_table[i] = c;
}
}

void main(void)
{
GenerateCRC32Table();
int j=0;
for(int i=0; i<256; i++) {
printf("0x%08X, ", crc32_table[i]);
if (++j >= 8) {
j = 0;
printf("\n");
}
}
}
[---------------------------------------------------------------------]

Merged in masterschlumpf/beremiz/wx3-fix (pull request #37)

Fix an exception with wx-3.0-gtk3 in PLCOpenEditor when generating ST files

Approved-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>

Fix an exception on wx-3.0-gtk3 in PLCOpenEditor when generating ST files.

On Python2.7 with WX3.0 and GTK3, an assertionError rises on generating a ST file if the name is already set. The first generation works without problems, if you generate the file a second one, PLCOpenEditor tries to open the file
save dialog with the pre entered name from last run. Then the following assertion pops up:

PyAssertionError: C++ assertion "volDummy.empty() && pathDummy.empty()" failed at ./src/common/filename.cpp(568) in Assign(): the file name shouldn't contain the path

This fix reduces the filepath of the ST file the to the filename. Now it works fine.

Fix typos in function names

update links to matiec and beremiz repos in README

fix zoom-in/zoom-out using mouse wheel

regression introduced by 2393:235f847be37e "python3 support: pylint, W1619 #(old-division) division w/o __future__ statement"

better pylint complain workaround

check_sources.sh makes me become even less productive

Added stub axis_s type in EtherLAB CiA402 support code, until Motion Contol Library comes back

Allow using one XSD based target description for many targets. Target description XSD can now use %(target_name)s to refer to target name.

Fix previous commit : Using wx.CallAfter shouldn't have been necessary, and was a symptom of failing evaluator's deadlock detection.

Fix startup of wxGlade base HMI. Wx calls were issued from non-wx thread (main).

Reworked chunk based transfer to support duplicated files (i.e. files with same content, but different names)

Fixed deadlock in runtime's Worker. Was discovered while using WAMP and PYRO simultaneously.

Add a debugger token to SetTraceVariables and GetTraceVariables to prevent crash an inconsistant data in case of multiple connections. Last connection now takes over existing connections's debug, and first connected IDE gets a wrning.

Fixed deadlock when using Wx together with Twisted in runtime.

Split IDE's frame OnCloseFrame() into TryCloseFrame() and OnCloseFrame(), to help further customization

fixed exception happening randomly just after showing discovery panel.

fixed exception happening when connecting to empty URI, and set URI through URI Editor Dialog popping up becaue empty.

Merged Mario's modbus fix : Modbus plugin: reset periodic activation timer when overrun occurs (delays due to communication errors, ...)

Modbus plugin: reset periodic activation timer when overrun occurs (delays due to communication errors, ...)

Disable MDNS:// scheme support. Also prevent discovery pannel to produce some. For now it seems that that feature is unused, and could be a security issue.

Added support to PYROS in Zeroconf discovery and publish. For now, PYRO://mdnsname._tcp.local. URI are broken, and discovery panel generate IP based URI by default.

PyroServer: fixed naming of class, and reorganized methods in order to ease subclassing, in case of customization of service publication on the local network (i.e. zeroconf)

Fix exception dialog with non recognized URI schemes

Fixed runtime's reconnecting loop not stopping when re-configuring WAMP.
In case WAMP was already trying to connect without success and user change WAMP configuration through web interface, previous ReconnectingClient wasn't stopped.

Removed nonsense code, that I should have check more in details before merging m(

Allow easier monkey patching of WAMP connector Session class

Expose new PLCObject API members to WAMP interface.

Use another way to ensure compatibility with Py3 about text type.

Make easier to read console error message in case of connection problem.

PYRO(S): Added timeout on client side to allow unfreezing IDE after some time when communication with target dropped

Enure that autostart blocks other @RunInMain PLCObject methods, and _unblocks_ them once autostart is done...

Fixed Discovery panel in URI Editor dialog : double click works back again, and avoid setting URI to unicode type.

Bigger chunks, from 16k to 1M

Empirically reverted calls done just after NewPLC back to the order as it was before chunked transfer. Apparently I broke something... To be continued

Chunk based transfer for PLC binary and extra files, and some collateral code refactoring.

Fix failing PLC build when building freshly created project that use default libraries blocks. When controller loads libraries according to attibutes in project files (BeremizRoot/Enable_{libname}_Library), use known default if attribute is missing.

Cosmetic change in PSKManagement.py

Fixed ID,last URI, or last connection date not being updated when connnecting to target.

Merged. Some changes that should already have been incuded during previous merge (mostly about PlcStatus) have been included this time.

IDManager : small cosmetic fixes and cleanup.

python3 support: pylint, W1633 # (round-builtin) round built-in referenced

because round behavior is changed to default behavior in Python3
(Banker round). It can cause slight differences in some cases.
Mostly graphical editors are affected, there could be single pixel differences.
Now I couldn't locate any visual differences in test programs.

python3 support: pylint,W1610 # (reduce-builtin) reduce built-in referenced

python3 support: pylint, W1653 # (next-method-defined) next method defined

python3 support: pylint, W1622 # (next-method-called) Called a next() method on an object

python3 support: pylint, W1625 # (raising-string) Raising a string exception

python3 support: pylint, W1624 # (indexing-exception) Indexing exceptions will not work on Python 3

python3 support: pylint, W1611 # (standarderror-builtin) StandardError built-in referenced

python3 support: pylint, W1652 # (deprecated-types-field) Accessing a deprecated fields on the types module

python3 support: pylint, W1651 (deprecated-itertools-function) Accessing a deprecated function on the itertools module

It's even 20% faster, than previous code. On python3 zip is even much more faster.

python3 support: pylint, W1649 # (deprecated-string-function) Accessing a deprecated function on the string module

python3 support: pylint, W1645 # (exception-message-attribute) Exception.message removed in Python 3

python3 support: pylint, W1646 # (invalid-str-codec) non-text encoding used in str.decode

python3 support: pylint,W1602 # (basestring-builtin) basestring built-in referenced

python3 support: pylint, W1629 # (nonzero-method) __nonzero__ method defined

python3 support: pylint, W1606 # (execfile-builtin) execfile built-in referenced

python3 support: pylint, W1607 # (file-builtin) file built-in referenced

python3 support: pylint, W1659 # (xreadlines-attribute) Accessing a removed xreadlines attribute

python3 support: pylint, W1601 # (apply-builtin) apply built-in referenced

Fix pep8 warning: W605 invalid escape sequence ?x?

pep8, ignore W606 'async' and 'await' are reserved keywords starting with Python 3.7

This error exists in pyjs extension, but pyjs isn't going to Python3.
'noqa' isn't working for W606, so this warning is disabled completely.
'async' and 'await' are still checked by pylint.

python3 support: pylint, W1619 #(old-division) division w/o __future__ statement

Make easier to run pytest on local X-server

cleanup pyc files between running pytest

this is need to avoid problem sometimes tests are run inside docker
container and sometimes local.

Traceback (most recent call last):
File "/usr/lib/python2.7/dist-packages/_pytest/config/__init__.py", line 409, in _importconftest
mod = conftestpath.pyimport()
File "/usr/lib/python2.7/dist-packages/py/_path/local.py", line 686, in pyimport
raise self.ImportMismatchError(modname, modfile, self)
ImportMismatchError: ('conftest', '/beremiz/tests/tools/conftest.py', local('/home/developer/beremiz/tests/tools/conftest.py'))
ERROR: could not load /home/developer/beremiz/tests/tools/conftest.py

python3 support: pylint, W1612 # (unicode-builtin) unicode built-in referenced

Use multiple processes to speed up pylint

0 will auto-detect the number of processors available to use.
version 1.6.5 (Debian 9.5) hangs for some reason in multi-process mode.

python3 support: pylint, W1613 # (xrange-builtin) xrange built-in referenced

python3 support: pylint, W1648 # (bad-python3-import) Module moved in Python 3

Fixed regression in connecting to LOCAL:// targets

Merge, with surprizingly little conflicts

IDManager : finished Import/Export. Added merging capability to import (asks if particular ID is replaced during import). Added ESC as closing shortcut to IDManager dialog, and adjusted its size.

merge

Update localization template

Fix 'msgid' format string with unnamed arguments cannot be properly localized

Add automatic check for localization strings with multiple unnamed arguments

Improve localization support in etherlab (mostly)

cleanup etherlab: pylint, W0602 (global-variable-not-assigned) Using global for 'X' but no assignment is done

cleanup: pylint, W0109 # (duplicate-key) Duplicate key 'X' in dictionary

Add python3 syntax checking to CI

Fix old style exception raise and exec syntax

Use python 3 compatible exception syntax everywhere

cleanup: pylint, R0123 # (literal-comparison) Comparison to literal

Use predefined constants for PlcStatus instead of string literals

cleanup: pylint, R1704 # (redefined-argument-from-local) Redefining argument with the local name 'Y'

cleanup: pylint, R1701 # (consider-merging-isinstance) Consider merging these isinstance calls to isinstance(CTNLDFLAGS, (str, unicode))

cleanup: pylint, E1304 # (missing-format-string-key) Missing key 'X_name' in format string dictionary

cleanup: pylint, E1300 # (bad-format-character) Unsupported format character '"' (0x22) at index 17

cleanup: pylint, W0111 # (assign-to-new-keyword) Name async will become a keyword in Python 3.7

cleanup: pylint, E1310 (bad-str-strip-call) Suspicious argument in str.strip call

Fix segmentation fault when last lines in text POUs should be highlighted

enable etherlab checks

resort enabled pylint check to move likely-most invasive changes to the end

clean etherlab: pylint, C0330 # (bad-continuation) Wrong hanging indentation before block

clean etherlab: pylint, W0612 # (unused-variable) Unused variable 'X'

clean etherlab: pylint, W1618 # (no-absolute-import) import missing `from __future__ import absolute_import`

clean etherlab: pylint,E0602 # (undefined-variable) Undefined variable 'X'

clean etherlab: pylint, E1136 # (unsubscriptable-object) Value 'X' is unsubscriptable

ignore missing MotionLibrary

to fix pylint error 'E0401 # (import-error) Unable to import 'X'

clean etherlab: pylint, E0611 # (no-name-in-module) No name 'X' in module 'Y'

clean etherlab: pylint, C0123 # (unidiomatic-typecheck) Using type() instead of isinstance() for a typecheck.

clean etherlab: pylint, W0104 # (pointless-statement) Statement seems to have no effect

clean etherlab: pylint, W0631 # (undefined-loop-variable) Using possibly undefined loop variable 'X'

clean etherlab: pylint, C1001 # (old-style-class) Old-style class defined.

clean etherlab: pylint, W0611 # (unused-import) Unused import X

clean etherlab: pylint, E0102 # (function-redefined) method already defined

clean etherlab: pylint, W0105 # (pointless-string-statement) String statement has no effect

clean etherlab: pylint,W0231 # (super-init-not-called) __init__ method from base class is not called

clean etherlab: pylint, C0412 # (ungrouped-imports) Imports from package X are not grouped

clean etherlab: pylint,W0108 # (unnecessary-lambda) Lambda may not be necessary

clean etherlab: pylint, C0411 # (wrong-import-order) standard import "import x" comes before "import y"

clean etherlab: pylint, W0404 # reimported module

check_source.sh: add E301 check to the list of selected PEP8 errors

clean etherlab: pep8, E301 expected 2 blank lines, found 1

clean etherlab: pep8, W503 line break before binary operator

clean etherlab: pep8, E266 too many leading '#' for block comment

clean etherlab: pep8, E122 continuation line missing indentation or outdented

clean etherlab: pep8, W191 indentation contains tabs

clean etherlab: pep8, E211 whitespace before '['

clean etherlab: pep8, E129 visually indented line with same indent as next logical line

clean etherlab: pep8, E127 continuation line over-indented for visual indent

clean etherlab: pep8, E129 visually indented line with same indent as next logical line

clean etherlab: pep8, W602 deprecated form of raising exception

clean etherlab: pep8, W601 .has_key() is deprecated, use 'in'

clean etherlab: pep8, E731 do not assign a lambda expression, use a def

clean etherlab: pep8, E203 whitespace before ','

clean etherlab: pep8, E712 comparison to True should be 'if cond is True:' or 'if cond:'

clean etherlab: pep8, E222 multiple spaces after operator

clean etherlab: pep8, E741 ambiguous variable name 'l'

cleanup etherlab: pep8, E306 expected 1 blank line before a nested definition, found X

cleanup etherlab: pep8, E305 expected 2 blank lines after class or function definition, found X

cleanup etherlab: pep8, E201 whitespace after '('

cleanup etherlab: pep8, E202 whitespace before ')'

cleanup etherlab: pep8, E227 missing whitespace around bitwise or shift operator

cleanup etherlab: pep8, E251 unexpected spaces around keyword / parameter equals

cleanup etherlab: pep8, E225 missing whitespace around operator

cleanup etherlab: pep8, E303 too many blank lines (2)

cleanup etherlab: pep8, E231 missing whitespace after ','

cleanup etherlab: pep8, E271 multiple spaces after keyword

cleanup etherlab: pep8, E261 at least two spaces before inline comment

cleanup etherlab: pep8, E302 expected 2 blank lines, found 1

cleanup etherlab: pep8, W293 blank line contains whitespace

cleanup etherlab: pep8, E228 missing whitespace around modulo operator

cleanup etherlab: pep8, E401 multiple imports on one line

cleanup etherlab: pep8, E265 block comment should start with '# '

cleanup etherlab: pep8, W291 trailing whitespace

convert some etherlab source files to unix format

cleanup etherlab: pep8, E722 do not use bare except

Ignore cache files and generated test reports

Update Beremiz translations and list of translators

Added Turkish, Romania, Portuguese, Polish, Dutch, Hungarian.
Most existed translation are updated.

Use the list of supported by app translations instead of supported translations by wx

This will make possible to translate application into locales, that
are not explicitly supported by wx: for example, 'pl' or 'bn_BD', 'bn_IN'.

Suppress message box in case current locale is unsupported or missing in wx

Beremiz can still be translated into it using own locales
available in './locale'.

Add commands to pull translation from transifex

tx - transifex cli client should be installed in the system.
It's free software and is available in Debian archive.

Run following commands:
1. Init your authorization token
$ make transifex_init

2. Pull translations
$ make transifex_pull

Add custom dialog to add/edit comment block in graphical editors

That allows to edit comment and immediately see how it'll be shown on wiresheet.

Cleanup examples so they look clean, nice and almost the same on Windows and GNU/Linux

use the same font size on Windows and GNU/Linux

use nice and pretty mono font in graphical languages (SFC, FBD, LD) as well

it looks like that was original idea, but some bug squashed in and
default font was used for POU.

at the same time fix use of mono font in the header of Variable panel
for SFC/FBD/LD POUs.

Don't need to call extra _init_

_init_ is already called for value in infos["elmt_type"]["initial"]().
Additional _init_() creates second set of child element and that
creates unusable xml project.
This regression cause by not well tested commit "Proper fix for error
'object has no attribute 'getSlave' in EtherCAT extension" (96ca6b056c55595f71bfaca9f54b9e8646460c23)

Fix black background in preview window

Problem found and fixed on GNU/Linux
wxWidgets 3.0 built with GTK3+ support and running on Xorg.

Avoid division by zero in case width or height for page are not specified

traceback:
File "/home/developer/WorkData/PLC/beremiz/beremiz/editors/Viewer.py", line 3755, in OnPaint
self.DoDrawing(dc)
File "/home/developer/WorkData/PLC/beremiz/beremiz/editors/Viewer.py", line 3723, in DoDrawing
for y in xrange(self.PageSize[1] - (ystart * SCROLLBAR_UNIT) % self.PageSize[1], int(window_size[1] / self.ViewScale[1]), self.PageSize[1]):
<type 'exceptions.ZeroDivisionError'>: integer division or modulo by zero

IDManager: added import/export plus little cosmetic enhancements.

IDManager : refactored a bit, moved some code into PSKManagement.py. Now captures URI and PSK on new PYRO(S) and propose them when editing URI. Import/export still to be implemented.

Renaming servicetype into scheme.

Added toolbar button to launch ID Manager dialog.

Renamed IDManager control into IDBrowser, because dialog will be named IDManager

IDManager.py : finished selector mode.

Added early implementation of IDManager.py. For now only used to select ID in URIEditor

Path may contain spaces... sequel of d1359cb

'Merged' URI editor dialog and Discovery dialog, also clean up related code

Cut more useless code from URI Editor

URI Editor Dialog : moved it to /dialog, and fixed naming.

URI editor : Rewrote most of it, cleaner.

PSK : Stunnel and/or OpenSSL (undocumented) handles PSK better without special chars, apparently

Prevent PLCObject to be imported from IDE as a side effect of importing runtime package

WAMP : ensure that unicode string is passed for published events IDs

PYRO PSK: adjusted cipher and key length to be usable with openSSL 1.0.2k.

Automatically get PSK and ID when connecting to PYRO[S], so that future connection through PYROS can use that same key. Also fixed case to UPPER for *PSK.

Runtime : Ensure that a random PSK secret compatible with stunnel is generated if -s commandline switch is used. Stunnel service is restarted after generation, using spawn_subprocess. TODO : give stunnel restart command as a commandline parameter.

Added runtime/spawn_subprocess.py. Force use posix spawn instead of fork, with API similar to subprocess. Using fork in runtime is incompatible with Xenomai, because memory is locked and this can lead to out of memory error.

Small cosmetic change to enhance readability and avoid confusion.

Force Zeroconf to listen and answer only on interface specified with '-i' command line argument.

Useless __name__ == '__main__' tests.

Fixed PYRO's PSK_Adapter : monkey patching was breaking non-PSK protocol, and import ssl was missing.

merge

Fix PYROPSK protocol configuration. After a few iteration of trial and error it appears that TSLv1 and PSK ciphers needs to be specified

merge

PYRO/TLSPSK : must use PYROLOC* protocol scheme in pyro URI, otherwise object ID is missing. Had to use more persuasive pyro3 monkey patching to have PYROLOCPSK resolved properly

PYRO/TLSPSK : fixed typos, used appropriate ciphers (https://github.com/drbild/sslpsk/issues/3), use PYROPSK instead of unresolvable PYROLOCPSK.

Replaced PYROSSL with PYROPSK.
Secrets are files named $ID.secret in project's /psk directory.
Connect with URI formated PYROPSK://host[:port]#ID

Beremiz_service now binds both pyro and nevow ports to interface given with '-i' argument.

Fixed typo in Wampclient.py

Please pylint and pep8

Merged

Show more exceptions on stdout, particularly those that are raised by AutoLoad (first item in Main Thread worker)

Some cleanup in WampClient and added functions that are usefull for extensions that need to use pub/sub.

Merged in Andrey's branch

Merged in yegorich/beremiz/py3-fix (pull request #36)

Use Python 3 compatible syntax for exceptions

Use Python 3 compatible syntax for exceptions

Fix non-usable toolbar on wxPython with GTK3+ in PLCOpenEditor

this problem is related to 'Fix non-usable toolbar on wxPython with
GTK3+' (5927710b). This problem does not happen in Beremiz because
additional necessary self.AUIManager.Update() is called
BeremizIDE. Therefore minimal change in the mentioned commit was
enough for Beremiz, but is not enough for PLCOpenEditor.

Avoid usage of localized strings before initialization during import in many modules

This happens if import is done before i18n setup
(InstallLocalRessources()).
This affects PLCOpenEditor mostly. Beremiz IDE is free from this issue, but moving
initialization from import should make modules more robust.
Otherwise execution result depends on where and when import was done
and this is not a good thing.

Some modules (ConfigTreeNode, features, CodeFileEditor related
classes) still have this, but they are used only in Beremiz.
Most problems result in non-working internatialization.
In some cases (VariablePanel) there is backtrace, because localized
key is not found in non-localized dictionary.

Remove executable bit from source files where it's not needed.

Avoid dictionary initialization during import in PouDialog

Because initialization happened before i18n setup, then it causes later
problems during creating new POU on non-English locales (Russian for example).

Traceback (most recent call last):
File "/home/developer/WorkData/PLC/beremiz/beremiz/IDEFrame.py", line 2332, in OnAddPouMenu
dialog = PouDialog(self, pou_type, type_readonly)
File "/home/developer/WorkData/PLC/beremiz/beremiz/dialogs/PouDialog.py", line 101, in __init__
self.RefreshLanguage()
File "/home/developer/WorkData/PLC/beremiz/beremiz/dialogs/PouDialog.py", line 154, in RefreshLanguage
if language != "SFC" or PouDialog.POU_TYPES_DICT[self.PouType.GetStringSelection()] != "function":
KeyError: u'\u043f\u0440\u043e\u0433\u0440\u0430\u043c\u043c\u0430'

Increase size of comment block in WAMP example, so all information is visible

Proper fix for error 'object has no attribute 'getSlave' in EtherCAT extension

traceback:
File "/home/developer/WorkData/PLC/beremiz/beremiz/IDEFrame.py", line 1433, in OnPouSelectedChanged
window.RefreshView()
File "/home/developer/WorkData/PLC/beremiz/beremiz/etherlab/ConfigEditor.py", line 837, in RefreshView
self.RefreshProcessVariables()
File "/home/developer/WorkData/PLC/beremiz/beremiz/etherlab/ConfigEditor.py", line 886, in RefreshProcessVariables
slaves = self.Controler.GetSlaves(**self.CurrentNodesFilter)
File "/home/developer/WorkData/PLC/beremiz/beremiz/etherlab/EthercatMaster.py", line 341, in GetSlaves
for slave in self.Config.getConfig().getSlave():
<type 'exceptions.AttributeError'>:_'lxml.etree._Element'_object_has_no_attribute_'getSlave'

Steps to reproduce problem:

- Add new EtherCAT master
- Add new EthercatNode to the master
- double click on


Revert commit "Dirty fix for error '_object_has_no_attribute_'getSlave' in EtherCAT extension"
[a3ac46366b86a0b237dac93be6b2281ac70b98a8].

The problem was that XML elements (proxy object) in some cases were created using custom XML
classes constructors and lxml.etree.Element() call and live python
patching. This causes that lxml backend doesn't know that custom python class
should be used for these XML elements.
Proxy object can be move/deleted and recreated by lxml
backend at any point in time or this can be done in python by copy/deepcopy operations.
If this happens, then newly created
proxy elements are using default class lxml.etree._Element. And all
custom functionality is lost.

All created XML elements should be always created through corresponding
parser and class lookup callback done by lxml backend.
It's described in more details in lxml documentation:
https://lxml.de/element_classes.html

Make comment blocks in examples slightly bigger so text inside is always visible

Separate application tests and code-style checking in different steps in bitbucket-pipelines

Make Beremiz_service print version information

Add support for long options '--help' and '--version' as
is recommended by GNU Coding Standards.

leave execute permissions only on Beremiz.py, Beremiz_serivce.py and PLCOpenEditor.py

Update requirements to include WAMP support

Use static library for Modbus

It makes easier deployment of projects with Modbus (similar to BACnet implementation)

Cleanup WAMP example

Closes #39

Update README for WAMP example to use crossbar with python3

crossbar python2 support is broken in v18.7.2.
I've submitted with fixes for that.
https://github.com/crossbario/crossbar/pull/1376

But they don't test crossbar with python2 in CI, so it's going to be
broken again in the future.
And there is no much reason to use crossbar with python2.

Make ID in WAMP project match with ID PLC runtime.

See project_files/wampconf.json. ID for runtime is "wamptest". The
same id should be used in project's location URI: WAMP://127.0.0.1:8888#Automation#wamptest

Fix SetServer method in WAMP

Remove non-existed PLCObject method 'ForceReload'

remote execute permissions from README file

Fix wxHMI example after upgrading wxGlade

Newer wxGlade generates code to initialize GridSizer's with empty
elements.

...
grid_sizer_1.Add(self.window_1, 1, wx.ALIGN_CENTER, 0)
sizer_2.Add((0, 0), 0, 0, 0)
sizer_2.Add((0, 0), 0, 0, 0)
sizer_2.Add((0, 0), 0, 0, 0)
sizer_2.Add((0, 0), 0, 0, 0)
...

That causes following traceback, if new buttons are added
to already full sizer.

PLCobject : Traceback (most recent call last):

File "./Beremiz_service.py", line 389, in default_evaluator
res = (tocall(*args, **kwargs), None)

File "/tmp/tmpQS8ct2/runtime_0.py", line 540, in _runtime_0_start
wx.MessageBox(_("Please stop PLC to close"))

File "/tmp/tmpQS8ct2/runtime_0.py", line 504, in Init
lambda axis:( MakeButtonFunc(self, sizer, axis+"axisMinus"),

File "/tmp/tmpQS8ct2/runtime_0.py", line 502, in <lambda>
lambda btname: MakeButtonFunc(self, sizer, btname), ActionButtons)

File "/tmp/tmpQS8ct2/runtime_0.py", line 461, in MakeButtonFunc
print sizer, btname

File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk3/wx/_core.py", line 14453, in Add
return _core_.Sizer_Add(*args, **kwargs)

PyAssertionError: C++ assertion "Assert failure" failed at
../src/common/sizer.cpp(1401) in DoInsert(): too many items (11 > 2*5)
in grid sizer (maybe you should omit the number of either rows or
columns?)


Tested with wxGlade version 0.8.3
Closes #41

Remove useless print statement from wxHMI GUI code

It's py3k incompatible.

Rename extension instance 'wxHMI' to 'wxglade_hmi'

It is necessary because of following commit 7f59aa398669 ('WxGlade HMI extension now does
only instanciate wx object who's name match extension's name. If no
object match the name and no code is provided in 'start' user python
code section, then a warning is issued')

Remove backup .bak files

Drop EtherCAT examples, because they are non-functional without releasing motion control library

Closes #38

merge

Dirty fix for error '_object_has_no_attribute_'getSlave' in EtherCAT extension

traceback:
File "/home/developer/WorkData/PLC/beremiz/beremiz/IDEFrame.py", line 1433, in OnPouSelectedChanged
window.RefreshView()
File "/home/developer/WorkData/PLC/beremiz/beremiz/etherlab/ConfigEditor.py", line 837, in RefreshView
self.RefreshProcessVariables()
File "/home/developer/WorkData/PLC/beremiz/beremiz/etherlab/ConfigEditor.py", line 886, in RefreshProcessVariables
slaves = self.Controler.GetSlaves(**self.CurrentNodesFilter)
File "/home/developer/WorkData/PLC/beremiz/beremiz/etherlab/EthercatMaster.py", line 341, in GetSlaves
for slave in self.Config.getConfig().getSlave():
<type 'exceptions.AttributeError'>:_'lxml.etree._Element'_object_has_no_attribute_'getSlave'

Steps to reproduce problem:

- Add new EtherCAT master
- Add new EthercatNode to the master
- double click on


this is looks like dirty hack to fix strange problem with initial[0]
changing its type after returning from _init_ method to lxml.etree._Element
As a result all methods generated by class factory are lost.

For example, in function initMethod initial[0].__class__ points to
xmlclass.xmlclass.Config. After map(self.append, initial)
self.Config.__class__ is 'xmlclass.xmlclass.Config' as well.
But after returning from initMethod (_init) in CreateElement
self.Config.__class__ has changed to lxml.etree._Element.


I've noticed similar behavior if copy/deepcopy is used for any child
of etree.ElementBase. See simple example below.
[-------------------------------------------------------------]
#!/usr/bin/python

from __future__ import print_function
from lxml import etree
import copy

class DefaultElementClass(etree.ElementBase):
def getLocalTag(self):
return etree.QName(self.tag).localname


def printInformation(x):
print(x, x.__class__, "getLocalTag" in dir(x))


a = DefaultElementClass()
printInformation(a)

#
printInformation(copy.copy(a))
printInformation(copy.deepcopy(a))
[-------------------------------------------------------------]

Fix wrong ST code generation in case of several coils connected to each other.


For example,
|---|Var0|----(Var1)--(Var2)---|

Closes #32

Update README with instruction to build BACnet library for BACnet support

Improve fix wrong code generation if EN/ENO are used in FBD/LD/SFC

Commit c9915bc6 "Fix wrong code generation if EN/ENO are used in
FBD/LD/SFC" caused following backtrace in some cases:

File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 476, in GenerateProgram
self.GeneratePouProgram(pou_name)
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 258, in GeneratePouProgram
program = pou_program.GenerateProgram(pou)
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 1713, in GenerateProgram
self.ComputeProgram(pou)
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 997, in ComputeProgram
eno_var = self.GetUsedEno(body, connections)
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 929, in GetUsedEno
for invar in blk.inputVariables.getvariable():
File "/home/developer/WorkData/PLC/beremiz/beremiz/xmlclass/xmlclass.py", line 1363, in getattrMethod
return DefaultElementClass.__getattribute__(self, name)
<type 'exceptions.AttributeError'>: 'inOutVariable' object has no attribute 'inputVariables'

Load images for EtherCAT extension

Fixes following backtrace:

Traceback (most recent call last):
File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk3/wx/_core.py", line 16765, in <lambda>
lambda event: event.callable(*event.args, **event.kw) )
File "/home/developer/WorkData/PLC/beremiz/beremiz/BeremizIDE.py", line 1074, in AddConfNode
self._Refresh(TITLE, FILEMENU, PROJECTTREE)
File "/home/developer/WorkData/PLC/beremiz/beremiz/IDEFrame.py", line 917, in _Refresh
self.RefreshFunctions[element]()
File "/home/developer/WorkData/PLC/beremiz/beremiz/IDEFrame.py", line 1526, in RefreshProjectTree
self.GenerateProjectTreeBranch(root, infos)
File "/home/developer/WorkData/PLC/beremiz/beremiz/IDEFrame.py", line 1565, in GenerateProjectTreeBranch
self.GenerateProjectTreeBranch(item, values)
File "/home/developer/WorkData/PLC/beremiz/beremiz/IDEFrame.py", line 1554, in GenerateProjectTreeBranch
self.TreeImageDict[icon_name] = self.TreeImageList.Add(GetBitmap(icon_name))
File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk3/wx/_gdi.py", line 6735, in Add
return _gdi_.ImageList_Add(*args, **kwargs)
ValueError: invalid null reference in method 'ImageList_Add', expected argument 2 of type 'wxBitmap const &

Flush standard output when runtime ready, so that IDE knows it, and can continue connection to LOCAL:// uri

Change behaviour of python_eval function block : if TRIG is false, then ACK is also false except a pulse precisely when receiving answer from interpreter

Removed useless condition in Worker.py that was allowing misfit non-serialized call when worker still not running its loop.

Refactoring. Separated PLC Object, PYRO Server and MainWorker :
- PLC Object is now a Singleton, instantiated through runtime.CreatePLCObjectSingleton(...)
- Pyro server doesn't hold any reference to PLCObject, and doesn't create it anymore
- PLC Object class doesn't inherit from Pyro.ObjBase anymore
- Pyro related code moved to runtime.PyroServer.py
- MainWorker class moved to runtime/Worker.py
- Both PLC Object and MainWorker creation happens in runtime/__init__.py

Fixed new code-generation code, that was making exception with simple variable-to-variable assignments.

BACnet : Fixed missing header include in server.c introduced in 37ef7a3c6b8b

merged

NevowServer : Added minimalist css style customization and a link to go to settings page and back

fixed setServer call in WampClient module. Was doing nothing because _PySrv wasn't global.

Removed now deprecated ForceReload from WAMP exposed calls

fixed documentation bug

NevowServer : added addInfoString to allow extensions to declare some read-only strings to be displayed in settings. Also renamed addExtension in addSettings for clarity.

fixed problems reported by certification testing : vendor identifier acces rights (now read only), and bvlc_maintenance timer was increasing too fast.

Some blank lines to make bitbucket's PEP8 2.2.0 happy

merged Andrey's default

Fix wrong code generation if EN/ENO are used in FBD/LD/SFC

This problem appears for example here

--------
------- | MOVE |
| MOVE1 |------|EN ENO|
------- | |
| |
------- | | -----------
| 23 |------|IN OUT|---| LocalVar0 |
------- -------- -----------


--------
------- | MOVE |
| MOVE2 |------|EN ENO|
------- | |
| |
------- | | -----------
| 15 |------|IN OUT|---| LocalVar0 |
------- -------- -----------

Before wrong code was generated for this case:

MOVE6_OUT := MOVE(EN := move1, IN := 23, ENO => MOVE6_ENO);
LocalVar0 := MOVE6_OUT;
MOVE4_OUT := MOVE(EN := move2, IN := 15, ENO => MOVE4_ENO);
LocalVar0 := MOVE4_OUT;

With this patch now following code is generated:

MOVE6_OUT := MOVE(EN := move1, IN := 23, ENO => MOVE6_ENO);
IF MOVE6_ENO THEN
LocalVar0 := MOVE6_OUT;
END_IF;
MOVE4_OUT := MOVE(EN := move2, IN := 15, ENO => MOVE4_ENO);
IF MOVE4_ENO THEN
LocalVar0 := MOVE4_OUT;
END_IF;


See discussion here:
https://sourceforge.net/p/beremiz/mailman/message/36378805/

Fix flickering in debug panel

This flickering made debug panel unusable, because most of the time
panel was white. This problem effects wxPython with GTK3+ backend
(at least on GNU/Linux systems).

Removed code IIUC draws box with content of moved debug variable, I
don't see any effect of it neither on GNU/Linux nor on Windows. It
should be safe to remove.

Fix non-usable toolbar on wxPython with GTK3+

On GNU/Linux if wxPython uses wxWidget with GTK3+ backend (this is
what most modern distributions do), then size of EditorToolBar was
always to store only one button.
This is because GetBestSize() is updated only after pane is shown and
updated.
The code does work correctly on python-wxgtk3.0 (gtk2 backend) on
GNU/Linux and with wxpython 2.8 on Windows.

Fix problem with decreasing size of StatusToolBar when tools are removed from toolbar.

StatusToolBar - toolbar with tool to build, clear, connect, ...
This problem appears only in python-wxgtk3.0. In python-wxgtk2.8 there
was not such problem.

If call StatusToolBar.SetMinSize(wx.DefaultSize), all is working, but
following warning message appears:

(Beremiz.py:15155): Gtk-WARNING **: 18:42:24.115: Negative content
width -6 (allocation 1, extents 4x3) while allocating gadget (node
toolbar, owner GtkToolbar)

To avoid that StatusToolBar.GetToolBitmapSize() is used instead of wx.DefaultSize

Add BACnet example

Rework README.md, add examples section, add instructions for Modbus extension, more information about runtime.

Add Modbus example

Disable source quality checking on ethercat plugin - will fix it later

Passed bacnet*.py through autopep8, and attemped to fix manually what went wrong + fixed pylint complains

More pylint+pep8 conformance

autopep8 + hand made fixes on ProjectController.py runtime/WampClient.py wxglade_hmi/wxglade_hmi.py

pylint on runtime/NevowServer.py

pep8 on runtime/NevowServer.py

merged

Make some POU libraries selected by default or not. This changes structure of features.libraries, please check and update your extensions if they use libraries

remove useless code

1. hotkey is already defined in menu string
2. remove duplicated code

Add full screen mode (menu and title are hidden)

It's can be switched by pressing Shift-F12 or by clicking button on the toolbar

Add information how to make shelve command work with check_source.sh called from hg hook

and added coresponding flag handling in check_source.sh

Automatically increment IEC-location address if copy of the variable is created

Make information about translation to be in unicode

This is necessary because some translator's names contains non-ASCII
characters and they are not handled properly in about dialog on Windows

Take plcopen_icons.svg as source of png icons as well

generate poe.ico from png images of different sizes.