Thu, 09 Mar 2017 18:03:57 +0300add hotkeys to open recent projects
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 09 Mar 2017 18:03:57 +0300] rev 1659
add hotkeys to open recent projects

For simplicity only last 9 projects are saved.

Alt-F, R, 1 - to open last opened project
Alt-F, R, 2 ...
...
Alt-F, R, 9 ...

Thu, 09 Mar 2017 17:29:17 +0300fix twice shown error message box, when wrong non-valid IEC identifier entered
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 09 Mar 2017 17:29:17 +0300] rev 1658
fix twice shown error message box, when wrong non-valid IEC identifier entered

It happens when non-valid name for variable name or name of field in
structure entered. This issue is described in details here:
http://trac.wxwidgets.org/ticket/16333

Thu, 09 Mar 2017 15:35:19 +0300apply constraints to names for tasks and task instances in resource configuration
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 09 Mar 2017 15:35:19 +0300] rev 1657
apply constraints to names for tasks and task instances in resource configuration

The same rules as for IEC identifiers are applied.
- no non-lating characters, ...
- no IEC keywords
- check for duplicate names in resource configuration

closes #19

Thu, 09 Mar 2017 13:01:28 +0500Fix russian translation
PaulBeltyukov [Thu, 09 Mar 2017 13:01:28 +0500] rev 1656
Fix russian translation

Mon, 06 Mar 2017 17:39:29 +0300Merged skvorl/beremiz into default
Sergey Surkov <surkovsv93@gmail.com> [Mon, 06 Mar 2017 17:39:29 +0300] rev 1655
Merged skvorl/beremiz into default

Fri, 03 Mar 2017 15:57:58 +0300add stretching to columns Name, Type, Doc in variable panel
Surkov Sergey <surkovsv93@gmail.com> [Fri, 03 Mar 2017 15:57:58 +0300] rev 1654
add stretching to columns Name, Type, Doc in variable panel

Mon, 06 Feb 2017 20:30:39 +0300fix SFC Step flush method
Surkov Sergey <surkovsv93@gmail.com> [Mon, 06 Feb 2017 20:30:39 +0300] rev 1653
fix SFC Step flush method

Mon, 06 Feb 2017 20:23:45 +0300fix redraw debug instance tab after transferring new build to PLC. closes #15
Surkov Sergey <surkovsv93@gmail.com> [Mon, 06 Feb 2017 20:23:45 +0300] rev 1652
fix redraw debug instance tab after transferring new build to PLC. closes #15

Mon, 06 Mar 2017 17:24:05 +05001. Deleted .directory file, and added it to .hgignore.
PaulBeltyukov [Mon, 06 Mar 2017 17:24:05 +0500] rev 1651
1. Deleted .directory file, and added it to .hgignore.
2. Added russian locale .mo file.

Mon, 06 Mar 2017 12:04:15 +0500Fix russian translation
PaulBeltyukov [Mon, 06 Mar 2017 12:04:15 +0500] rev 1650
Fix russian translation

Thu, 16 Feb 2017 14:35:12 +0500Merge
PaulBeltyukov [Thu, 16 Feb 2017 14:35:12 +0500] rev 1649
Merge

Thu, 16 Feb 2017 14:34:40 +0500Safe
PaulBeltyukov [Thu, 16 Feb 2017 14:34:40 +0500] rev 1648
Safe

Fri, 27 Jan 2017 16:53:04 +0300broken code is temporarily blocked
Surkov Sergey <surkovsv93@gmail.com> [Fri, 27 Jan 2017 16:53:04 +0300] rev 1647
broken code is temporarily blocked
This code used to highlight with green color text in upper-left corner (path to current instance) in debug mode, if current instance active. Only SFC actions are affected. #16

Fri, 27 Jan 2017 16:01:23 +0300fix exception handling
Surkov Sergey <surkovsv93@gmail.com> [Fri, 27 Jan 2017 16:01:23 +0300] rev 1646
fix exception handling
now only one exception dialog is displayed, if many same type exceptions handled (like in #16), and bug reports files always save after exception, not only after pressing "OK" button in exception dialog, closes #17

Fri, 27 Jan 2017 13:04:25 +0300change directory for saving Beremiz bug reports from current working directory to TEMP directory.
Surkov Sergey <surkovsv93@gmail.com> [Fri, 27 Jan 2017 13:04:25 +0300] rev 1645
change directory for saving Beremiz bug reports from current working directory to TEMP directory.

Thu, 26 Jan 2017 17:16:54 +0300Correct element size, if block type or variable name is wider than block width.
Surkov Sergey <surkovsv93@gmail.com> [Thu, 26 Jan 2017 17:16:54 +0300] rev 1644
Correct element size, if block type or variable name is wider than block width.
Previously, if size corrected, element changed position to the right (or down, if height is corrected). Now upper-left corner is fixed.

Thu, 26 Jan 2017 15:38:21 +0300remove non-existed and not necessary self.logger from detecting options in iec2c
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 26 Jan 2017 15:38:21 +0300] rev 1643
remove non-existed and not necessary self.logger from detecting options in iec2c

Mon, 23 Jan 2017 16:22:04 +0300remove Linux target from first_steps example
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 23 Jan 2017 16:22:04 +0300] rev 1642
remove Linux target from first_steps example

Then default target on the system will be used.

Tue, 24 Jan 2017 01:09:54 +01001.2rc1 1.2
Edouard Tisserant 7BB06627 <edouard.tisserant@gmail.com> [Tue, 24 Jan 2017 01:09:54 +0100] rev 1641
1.2rc1

Tue, 24 Jan 2017 01:07:56 +0100closing 1.1 branch 1.1 Korean release
Edouard Tisserant 7BB06627 <edouard.tisserant@gmail.com> [Tue, 24 Jan 2017 01:07:56 +0100] rev 1640
closing 1.1 branch

Thu, 19 Jan 2017 13:56:09 +0300for tests svgui and logging move code from old py_ext.xml to the new pyfile.xml
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 19 Jan 2017 13:56:09 +0300] rev 1639
for tests svgui and logging move code from old py_ext.xml to the new pyfile.xml

Tue, 17 Jan 2017 16:34:24 +0300merge
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 17 Jan 2017 16:34:24 +0300] rev 1638
merge

Tue, 17 Jan 2017 13:30:38 +0300fix IL jumps highlighting in Text Viewer
Surkov Sergey <surkovsv93@gmail.com> [Tue, 17 Jan 2017 13:30:38 +0300] rev 1637
fix IL jumps highlighting in Text Viewer

Mon, 16 Jan 2017 12:22:58 +0300change white background for icons in PouInstanceVariablePanel to transparent
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 16 Jan 2017 12:22:58 +0300] rev 1636
change white background for icons in PouInstanceVariablePanel to transparent

in wxPython 2.8 panel has white background and therefore white
background is appropriate, but in wxPython 3.0 panel has grey
background (on GNU/Linux and on Windows).
Transparent background looks good on both wxPython versions and on all platforms.

Mon, 16 Jan 2017 12:15:20 +0300change white background for project tree element to transparent
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 16 Jan 2017 12:15:20 +0300] rev 1635
change white background for project tree element to transparent

because on GNU/Linux project tree has grey background, therefore
white background looks not good.

Mon, 16 Jan 2017 01:19:58 +0100fix second error message in case of error appearing too early to have a wx frame
Edouard Tisserant 7BB06627 <edouard.tisserant@gmail.com> [Mon, 16 Jan 2017 01:19:58 +0100] rev 1634
fix second error message in case of error appearing too early to have a wx frame

Mon, 16 Jan 2017 01:14:57 +0100fix a side effect of 95ecb26fdc4e
Edouard Tisserant 7BB06627 <edouard.tisserant@gmail.com> [Mon, 16 Jan 2017 01:14:57 +0100] rev 1633
fix a side effect of 95ecb26fdc4e

Fri, 13 Jan 2017 20:05:59 +0300remove old unused .cvsignore
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 13 Jan 2017 20:05:59 +0300] rev 1632
remove old unused .cvsignore

Fri, 13 Jan 2017 19:51:36 +0300fix issue with printing scheme (FBD, LD or SFC) with comment element on GNU/Linux
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 13 Jan 2017 19:51:36 +0300] rev 1631
fix issue with printing scheme (FBD, LD or SFC) with comment element on GNU/Linux

If you draw FBD scheme and place comment on it and then try to print
it, then no wires will be printed and comment box is empty (text is
missing). This happens only for wx.PrinterDC and not on wx.MemoryDC
that is used to draw print preview window in Beremiz IDE.
Looks like a bug in wxPython or wxWidgets.

There were found several workaround for this issue.
1) If some dc.DrawLines call is placed before dc.DrawPolygon, then the
problem is gone.

...
dc.DrawLines(polygon)
dc.DrawPolygon(polygon)
...

2) Reseting DC brush solves the problem as well (see this changeset).

Fri, 13 Jan 2017 16:47:46 +0300detect iec2c options and ieclib path only once during the first build
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 13 Jan 2017 16:47:46 +0300] rev 1630
detect iec2c options and ieclib path only once during the first build

Fri, 13 Jan 2017 15:08:40 +0300attach checkedBlockDict variable to the body object
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 13 Jan 2017 15:08:40 +0300] rev 1629
attach checkedBlockDict variable to the body object

Fri, 13 Jan 2017 15:03:35 +0300fix file header in AboutDialog.py
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 13 Jan 2017 15:03:35 +0300] rev 1628
fix file header in AboutDialog.py

Thu, 12 Jan 2017 14:47:15 +0300update Russian translation
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 12 Jan 2017 14:47:15 +0300] rev 1627
update Russian translation

Thu, 12 Jan 2017 14:37:55 +0300check before program generation whether SFC step, that is referenced
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 12 Jan 2017 14:37:55 +0300] rev 1626
check before program generation whether SFC step, that is referenced
by SFC jump, does exists

Wed, 11 Jan 2017 14:15:45 +0300use translatable descriptions for stadard and additional IEC function
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 11 Jan 2017 14:15:45 +0300] rev 1625
use translatable descriptions for stadard and additional IEC function
blocks from xml files instead of hardcoded in python

Wed, 11 Jan 2017 12:57:40 +0300move code in mki18n.py generated translation strings from custom files into separate function
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 11 Jan 2017 12:57:40 +0300] rev 1624
move code in mki18n.py generated translation strings from custom files into separate function

Wed, 11 Jan 2017 11:40:53 +0300clean search result panel after open another project
Surkov Sergey <surkovsv93@gmail.com> [Wed, 11 Jan 2017 11:40:53 +0300] rev 1623
clean search result panel after open another project

Tue, 10 Jan 2017 13:45:56 +0300fix highlight of search result in Search Result Panel
Surkov Sergey <surkovsv93@gmail.com> [Tue, 10 Jan 2017 13:45:56 +0300] rev 1622
fix highlight of search result in Search Result Panel
Remove previous highlight, after next search result clicked.

Tue, 10 Jan 2017 14:08:49 +0300fix doubling search results in Search Result Panel
Surkov Sergey <surkovsv93@gmail.com> [Tue, 10 Jan 2017 14:08:49 +0300] rev 1621
fix doubling search results in Search Result Panel

After fix local search in SFC POU in 163d3a8, search results tree assemble with "children" branches: results of search in actions anf transitions. Deleted code doubling this search results into one more separate branch, so it's useless.

Thu, 29 Dec 2016 18:41:38 +0300make FindInPouDialog work on Windows with wxPython 2.8
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 29 Dec 2016 18:41:38 +0300] rev 1620
make FindInPouDialog work on Windows with wxPython 2.8

additional fix for changeset 474de7f

Thu, 29 Dec 2016 18:36:00 +0300fix local search in actions and transitions
Surkov Sergey <surkovsv93@gmail.com> [Thu, 29 Dec 2016 18:36:00 +0300] rev 1619
fix local search in actions and transitions

Wed, 28 Dec 2016 19:05:28 +0300convert FindInPouDialog from wx.Frame to wx.Dialog
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 28 Dec 2016 19:05:28 +0300] rev 1618
convert FindInPouDialog from wx.Frame to wx.Dialog

In this case FindInPouDialog Windows isn't listed in windows manager
on Alt-Tab. And it's not shown on top of other applications. For
example, previously the dialog was shown even on top of web browser or
word processor.

Wed, 28 Dec 2016 17:10:04 +0300temporary disable SFC transitions in IL, because matiec can't compile it
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 28 Dec 2016 17:10:04 +0300] rev 1617
temporary disable SFC transitions in IL, because matiec can't compile it

matiec freezes in this case.
See https://bitbucket.org/mjsousa/matiec/issues/58/iec2c-freezes-if-sfc-transition-is-in-il

Wed, 28 Dec 2016 16:33:50 +0300fix issue with creating SFC transitions using ST and IL
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 28 Dec 2016 16:33:50 +0300] rev 1616
fix issue with creating SFC transitions using ST and IL

Beremiz generates text representation for transitions without names.
Therefore transition name in its IL code is not needed.

Mon, 26 Dec 2016 14:01:54 +0300replace '-' with '.' in resource tab and transition/action SFC code
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 26 Dec 2016 14:01:54 +0300] rev 1615
replace '-' with '.' in resource tab and transition/action SFC code


This makes tab names consistent with the way the same information is shown in variable panel.

Mon, 26 Dec 2016 13:49:38 +0300check during program generation whether source signal is defined for single task
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 26 Dec 2016 13:49:38 +0300] rev 1614
check during program generation whether source signal is defined for single task

Fri, 23 Dec 2016 18:40:31 +0300fix strange behavior on Backspace press in ST
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 23 Dec 2016 18:40:31 +0300] rev 1613
fix strange behavior on Backspace press in ST

Before:
if text was selected and cursor was at indention, one indention (two
spaces) was removed.

if cursor was at start position of the line, then nothing happened.

if cursor was in the middle of indention then on backspace more
indention were added


Now:
if text is selected, it will be removed.
if cursor is at start position, then new line will be removed.
if cursor was in the middle of indention one indention is removed.

Thu, 22 Dec 2016 17:39:58 +0300fix close button in system menu for AboutDialog on Windows
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 22 Dec 2016 17:39:58 +0300] rev 1612
fix close button in system menu for AboutDialog on Windows


If SetEscapeId receives wx.ID_CLOSE as parameter, then on Windows with
wxPython 2.8 system close button in title bar stops working.
If wx.ID_CANCEL or wx.ID_OK is used in SetEscapeId call, then close
button works correctly.

Thu, 22 Dec 2016 14:38:56 +0300make renames caseinsensitive
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 22 Dec 2016 14:38:56 +0300] rev 1611
make renames caseinsensitive

Tue, 20 Dec 2016 17:11:36 +0300fix problem with SFC action/transition rename
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 20 Dec 2016 17:11:36 +0300] rev 1610
fix problem with SFC action/transition rename

Traceback (most recent call last):
File "/home/developer/WorkData/PLC/beremiz/beremiz/IDEFrame.py", line
1636, in OnProjectTreeItemEndEdit
elif new_name.upper() in [name.upper() for name in
self.Controler.GetProjectPouVariableNames(pou_name) if name !=
old_name]:
NameError: global name 'pou_name' is not defined

Tue, 20 Dec 2016 14:41:10 +0300fix problem that it was impossible to edit SFC jump, if it references non-existent SFC step
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 20 Dec 2016 14:41:10 +0300] rev 1609
fix problem that it was impossible to edit SFC jump, if it references non-existent SFC step

Tue, 20 Dec 2016 13:26:54 +0300remove all corresponding SFC jumps when SFC step is removed (but only in DRIVENDRAWING_MODE)
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 20 Dec 2016 13:26:54 +0300] rev 1608
remove all corresponding SFC jumps when SFC step is removed (but only in DRIVENDRAWING_MODE)

Tue, 20 Dec 2016 13:26:24 +0300rename all corresponding SFC jumps when SFC step is renamed (but only in DRIVENDRAWING_MODE)
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 20 Dec 2016 13:26:24 +0300] rev 1607
rename all corresponding SFC jumps when SFC step is renamed (but only in DRIVENDRAWING_MODE)

Wed, 14 Dec 2016 13:14:45 +0300add check of new project path in Save As
Sergey Surkov <surkovsv93@gmail.com> [Wed, 14 Dec 2016 13:14:45 +0300] rev 1606
add check of new project path in Save As
add dialog window if selected directory is the current directory project, or already contains another project

Wed, 14 Dec 2016 12:44:30 +0300fix issue that in Debug mode LD instance doesn't show correctly its state after
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 14 Dec 2016 12:44:30 +0300] rev 1605
fix issue that in Debug mode LD instance doesn't show correctly its state after
continuation of FBD_Connector.

Previously state signals doesn't propogate through FBD_Connector.

Wed, 14 Dec 2016 12:36:04 +0300fix issue with task rename if "Name" column label is translated into
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 14 Dec 2016 12:36:04 +0300] rev 1604
fix issue with task rename if "Name" column label is translated into
other language

Wed, 14 Dec 2016 12:31:06 +0300fix issue with compiling SFC POU with non-connected transition (type "connection")
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 14 Dec 2016 12:31:06 +0300] rev 1603
fix issue with compiling SFC POU with non-connected transition (type "connection")

Tue, 13 Dec 2016 17:47:34 +0300fix bug with recent projects menu, remove path to the project from menu, if project directory doesn't exist
Sergey Surkov <surkovsv93@gmail.com> [Tue, 13 Dec 2016 17:47:34 +0300] rev 1602
fix bug with recent projects menu, remove path to the project from menu, if project directory doesn't exist

Tue, 13 Dec 2016 17:40:03 +0300fix bug with empty directories in recent projects menu
Sergey Surkov <surkovsv93@gmail.com> [Tue, 13 Dec 2016 17:40:03 +0300] rev 1601
fix bug with empty directories in recent projects menu
remove path to a project from recent projects menu, if project directory is empty

Mon, 12 Dec 2016 14:29:40 +0300fix list of recent projects in File menu, add path to current project after Save As
Sergey Surkov <surkovsv93@gmail.com> [Mon, 12 Dec 2016 14:29:40 +0300] rev 1600
fix list of recent projects in File menu, add path to current project after Save As

Thu, 08 Dec 2016 17:54:43 +0300by default init input and output in step sfc block, and output for initial step sfc block
Sergey Surkov <surkovsv93@gmail.com> [Thu, 08 Dec 2016 17:54:43 +0300] rev 1599
by default init input and output in step sfc block, and output for initial step sfc block

Wed, 07 Dec 2016 19:28:13 +0300update PLC status after initialization
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 19:28:13 +0300] rev 1598
update PLC status after initialization

This is necessary especially if existed PLC program is loaded, but PLC
is not started automatically. In this case taskbar icon shows that PLC
isn't empty.

Wed, 07 Dec 2016 19:25:58 +0300always load existing PLC program from the working directory
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 19:25:58 +0300] rev 1597
always load existing PLC program from the working directory

Wed, 07 Dec 2016 19:24:16 +0300stop PLC before unloading
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 19:24:16 +0300] rev 1596
stop PLC before unloading


This fixes segmentation fault if service was quit without stopping it.
It has happened if Beremiz service was quit using taskbar icon or by
closing Beremiz IDE (in case of autostarted local service).

In second case to trigger the bug following step has to be done:
1. Open Beremiz IDE
2. Open project, compile and connect to LOCAL:// runtime
3. Transfer and start the PLC program
4. Open other project without disconneting the PLC runtime
5. Close Beremiz IDE

Wed, 07 Dec 2016 18:32:34 +0300add internatialization support for Beremiz_service.py
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 18:32:34 +0300] rev 1595
add internatialization support for Beremiz_service.py

Wed, 07 Dec 2016 18:25:37 +0300fix issue with changing annonced Pyro service name via taskbar icon
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 18:25:37 +0300] rev 1594
fix issue with changing annonced Pyro service name via taskbar icon

Wed, 07 Dec 2016 18:23:59 +0300don't crash on trying to change IP interface for Beremiz_service using taskbar icon if IP wasn't previously
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 18:23:59 +0300] rev 1593
don't crash on trying to change IP interface for Beremiz_service using taskbar icon if IP wasn't previously


By default IP is not set (None) and service listen only on localhost interface.

Wed, 07 Dec 2016 18:15:04 +0300start/stop from taskbar icon only if PLC is stopped/started
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 18:15:04 +0300] rev 1592
start/stop from taskbar icon only if PLC is stopped/started

Wed, 07 Dec 2016 17:54:41 +0300close Pyro socket after daemon stop
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 17:54:41 +0300] rev 1591
close Pyro socket after daemon stop


without that socket port is open after daemon shutdown.
As a result if you restart daemon with new settings (service name, for example),
it can't listen on already used port and opens the next free TCP port
regardless of requested settings.

Wed, 07 Dec 2016 17:51:20 +0300add python-wxgtk3.0 support to Beremiz_service.py
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 17:51:20 +0300] rev 1590
add python-wxgtk3.0 support to Beremiz_service.py

Fri, 02 Dec 2016 17:48:26 +0300make about dialog on Windows not so big
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 02 Dec 2016 17:48:26 +0300] rev 1589
make about dialog on Windows not so big


It was automatically expanded to place description in one line.

Thu, 01 Dec 2016 18:31:10 +0300update Russian translation
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 01 Dec 2016 18:31:10 +0300] rev 1588
update Russian translation

Thu, 01 Dec 2016 18:30:34 +0300add i18n to PLC status
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 01 Dec 2016 18:30:34 +0300] rev 1587
add i18n to PLC status

Extra strings are added to the code to make mki18n.py to find these
strings in source files and put them into i18n/messages.pot.

Thu, 01 Dec 2016 16:59:16 +0300remove clear and reset execution order buttons in popup menu in SFC and LD viewers.
Sergey Surkov <surkovsv93@gmail.com> [Thu, 01 Dec 2016 16:59:16 +0300] rev 1586
remove clear and reset execution order buttons in popup menu in SFC and LD viewers.

Thu, 01 Dec 2016 16:52:28 +0300fix initial(equal to the min) number of sequences in SFC Divergence dialog.
Sergey Surkov <surkovsv93@gmail.com> [Thu, 01 Dec 2016 16:52:28 +0300] rev 1585
fix initial(equal to the min) number of sequences in SFC Divergence dialog.

Thu, 01 Dec 2016 16:40:49 +0300make only correct blocks(by IEC 61131-3 standard) available in wire popup menu in SFC Viewer
Sergey Surkov <surkovsv93@gmail.com> [Thu, 01 Dec 2016 16:40:49 +0300] rev 1584
make only correct blocks(by IEC 61131-3 standard) available in wire popup menu in SFC Viewer

Wed, 30 Nov 2016 14:27:18 +0300move EnhancedStatusBar.py to the right location
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 30 Nov 2016 14:27:18 +0300] rev 1583
move EnhancedStatusBar.py to the right location

Tue, 29 Nov 2016 11:41:09 +0300add internatialization support to startup messages during checking software updates
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 29 Nov 2016 11:41:09 +0300] rev 1582
add internatialization support to startup messages during checking software updates

Mon, 28 Nov 2016 16:47:01 +0300fix translation strings with multiple parameters
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 28 Nov 2016 16:47:01 +0300] rev 1581
fix translation strings with multiple parameters


this fixes a lot of warnings given by msgmerge:

../PLCOpenEditor.py:196: warning: 'msgid' format string with unnamed arguments cannot be properly localized:
The translator cannot reorder the arguments.
Please consider using a format string with named arguments,

Mon, 28 Nov 2016 16:27:24 +0300change bug report address for PLCOpenEditor to beremiz-devel@lists.sourceforge.net
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 28 Nov 2016 16:27:24 +0300] rev 1580
change bug report address for PLCOpenEditor to beremiz-devel@lists.sourceforge.net

make error message to be the same as in Beremiz IDE

Mon, 28 Nov 2016 16:12:27 +0300fix segmentation fault on clicking red point in compilation console if that compilation error coverts several units in plcopen file
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 28 Nov 2016 16:12:27 +0300] rev 1579
fix segmentation fault on clicking red point in compilation console if that compilation error coverts several units in plcopen file

closes #11

Thu, 24 Nov 2016 18:33:56 +0300add localization to time strings in DebugVariablePanel and to dialog shown after variable drag'n'drop
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 24 Nov 2016 18:33:56 +0300] rev 1578
add localization to time strings in DebugVariablePanel and to dialog shown after variable drag'n'drop

Thu, 24 Nov 2016 15:46:17 +0300fix issue that if located variable was dropped in location column, then address was changed in wrong row (row - 1).
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 24 Nov 2016 15:46:17 +0300] rev 1577
fix issue that if located variable was dropped in location column, then address was changed in wrong row (row - 1).

It's not neccessary to carry about label size. YToRow() does the work.

Thu, 24 Nov 2016 15:37:03 +0300increase size for time buttons in LogViewer
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 24 Nov 2016 15:37:03 +0300] rev 1576
increase size for time buttons in LogViewer

The buttons are slightly bigger now. This gives more space for label
translations in other languages.
closes #12

Thu, 24 Nov 2016 13:17:06 +0300don't rebuild the makefile based project if only companyName, projectName or productName are changed
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 24 Nov 2016 13:17:06 +0300] rev 1575
don't rebuild the makefile based project if only companyName, projectName or productName are changed

And this fix current encoding issues, because all these information fields can
contain non-latin characters.

Tue, 22 Nov 2016 18:42:48 +0300add progress bar to status bar
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 22 Nov 2016 18:42:48 +0300] rev 1574
add progress bar to status bar

It can be used to display progress during program upload.
To use it call ShowPLCProgress (like ShowPLCProgress("transfered",
10)) in your PLCObject implementation.

Sat, 19 Nov 2016 23:42:49 +0100fix warning: 'return' with no value in function startPLC
ctbenergy <ewald.weinahndl@gmail.com> [Sat, 19 Nov 2016 23:42:49 +0100] rev 1573
fix warning: 'return' with no value in function startPLC

Sat, 19 Nov 2016 22:20:19 +0100fix inconsistent whitespace
ctbenergy <ewald.weinahndl@gmail.com> [Sat, 19 Nov 2016 22:20:19 +0100] rev 1572
fix inconsistent whitespace

Fri, 18 Nov 2016 13:57:42 +0300fix license notices in source files and license files under GPLv2+
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 18 Nov 2016 13:57:42 +0300] rev 1571
fix license notices in source files and license files under GPLv2+

Previously a lot of files were referenced to GNU Public License 2.1,
which never existed.
All copyright attributions are kept the same.

Thu, 17 Nov 2016 22:57:20 +0300fix PLC autostart option for Beremiz_service.py
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 17 Nov 2016 22:57:20 +0300] rev 1570
fix PLC autostart option for Beremiz_service.py

Thu, 17 Nov 2016 22:41:41 +0300remove old debug code
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 17 Nov 2016 22:41:41 +0300] rev 1569
remove old debug code

Thu, 17 Nov 2016 14:11:48 +0300fix wrong font family in CustromGrid control
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 17 Nov 2016 14:11:48 +0300] rev 1568
fix wrong font family in CustromGrid control

closes #10

Thu, 17 Nov 2016 14:04:44 +0300now only correct chart can be created in SFC Viewer
Sergey Surkov <surkovsv93@gmail.com> [Thu, 17 Nov 2016 14:04:44 +0300] rev 1567
now only correct chart can be created in SFC Viewer

if user trying to connect incompatible blocks (by IEC 61131-3 standard), wire highlight will become red

Thu, 17 Nov 2016 13:48:36 +0300add Russian translations for About dialogs
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 17 Nov 2016 13:48:36 +0300] rev 1566
add Russian translations for About dialogs

Thu, 17 Nov 2016 13:48:04 +0300make about dialog boxes use standard wx about dialogs
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 17 Nov 2016 13:48:04 +0300] rev 1565
make about dialog boxes use standard wx about dialogs

Any information in dialog can be easily changed without much effort
and the dialog can be easy translated.

Unfortunately on Windows there is no good standard about dialog,
therefore own implementation is used there.

Tue, 08 Nov 2016 18:14:30 +0300fix highlighting error and warning messages with non-lating characters
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 08 Nov 2016 18:14:30 +0300] rev 1564
fix highlighting error and warning messages with non-lating characters

Tue, 08 Nov 2016 18:06:30 +0300fix breaking non-latin description and comments in FBD, LD, SFC and
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 08 Nov 2016 18:06:30 +0300] rev 1563
fix breaking non-latin description and comments in FBD, LD, SFC and
project settings after Undo operation

Wed, 02 Nov 2016 14:23:24 +0300fix borders of pull-down choice list box in Config tab, in Project Properties
Sergey Surkov <surkovsv93@gmail.com> [Wed, 02 Nov 2016 14:23:24 +0300] rev 1562
fix borders of pull-down choice list box in Config tab, in Project Properties

Tue, 01 Nov 2016 14:44:22 +0300add version.py needed for previous commit '4ce8492'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 01 Nov 2016 14:44:22 +0300] rev 1561
add version.py needed for previous commit '4ce8492'

Tue, 01 Nov 2016 14:03:14 +0300add version with commit hash to 'About' dialogs for Beremiz IDE and PLCOpenEditor
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 01 Nov 2016 14:03:14 +0300] rev 1560
add version with commit hash to 'About' dialogs for Beremiz IDE and PLCOpenEditor

Mon, 31 Oct 2016 13:59:56 +0300ignore generated bugreports and output of i18n script
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 31 Oct 2016 13:59:56 +0300] rev 1559
ignore generated bugreports and output of i18n script

Fri, 28 Oct 2016 18:28:10 +0300now dialogs Find and Search in Project can be closed with ESC button
Sergey Surkov <surkovsv93@gmail.com> [Fri, 28 Oct 2016 18:28:10 +0300] rev 1558
now dialogs Find and Search in Project can be closed with ESC button

Fri, 28 Oct 2016 18:17:35 +0300fix russian translation of "direction" in Find dialog
Sergey Surkov <surkovsv93@gmail.com> [Fri, 28 Oct 2016 18:17:35 +0300] rev 1557
fix russian translation of "direction" in Find dialog

Fri, 28 Oct 2016 18:11:43 +0300fix major bugs in Find and Search in Project functionality.
Sergey Surkov <surkovsv93@gmail.com> [Fri, 28 Oct 2016 18:11:43 +0300] rev 1556
fix major bugs in Find and Search in Project functionality.

fix case sensitive and regexp search, remove duplicating code

Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>

Fri, 28 Oct 2016 17:21:42 +0300fix issue with non-updated button 'generated IECCode' after Build and Clean
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 28 Oct 2016 17:21:42 +0300] rev 1555
fix issue with non-updated button 'generated IECCode' after Build and Clean

Thu, 27 Oct 2016 17:07:44 +0300increase dialog size for edit SFC transition, so buttons are visible
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 27 Oct 2016 17:07:44 +0300] rev 1554
increase dialog size for edit SFC transition, so buttons are visible

Thu, 27 Oct 2016 16:24:13 +0300fix issue that sometimes period for cyclic task wasn't saved.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 27 Oct 2016 16:24:13 +0300] rev 1553
fix issue that sometimes period for cyclic task wasn't saved.

This is complete fix for the problem described in 8626bba.

Thu, 27 Oct 2016 15:31:43 +0300add first steps example, that shows how use all IEC 61131 languages
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 27 Oct 2016 15:31:43 +0300] rev 1552
add first steps example, that shows how use all IEC 61131 languages

Wed, 26 Oct 2016 19:13:26 +0300fix issue with empty frame with generated ST code
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 26 Oct 2016 19:13:26 +0300] rev 1551
fix issue with empty frame with generated ST code

Wed, 26 Oct 2016 15:51:20 +0300fix not saving location address from variable panel
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 26 Oct 2016 15:51:20 +0300] rev 1550
fix not saving location address from variable panel

this regression was introduced by commit 3518d10

Mon, 24 Oct 2016 18:02:53 +0300add $(Beremiz installation)/mingw/bin in PATH on Windows platform
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 24 Oct 2016 18:02:53 +0300] rev 1549
add $(Beremiz installation)/mingw/bin in PATH on Windows platform

This fixes issue if multiple gcc installation are found in user's
PATH. Now gcc from Beremiz is used by default.

Fri, 21 Oct 2016 13:06:31 +0300fix issue with non-working global hotkeys in IEC code panel
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 21 Oct 2016 13:06:31 +0300] rev 1548
fix issue with non-working global hotkeys in IEC code panel

Thu, 20 Oct 2016 14:45:27 +0300add more comments to svgui example
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 20 Oct 2016 14:45:27 +0300] rev 1547
add more comments to svgui example

Thu, 20 Oct 2016 14:45:11 +0300cleanup traffic lights example
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 20 Oct 2016 14:45:11 +0300] rev 1546
cleanup traffic lights example

Wed, 19 Oct 2016 16:32:10 +0300cleanup svgui example
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 19 Oct 2016 16:32:10 +0300] rev 1545
cleanup svgui example

Tue, 18 Oct 2016 17:44:08 +0300Fix bug with two or more wires connected to one input. Now only one wire can be connected to one input, except BOOLean signals in LD and SFC. If user trying to connect wire with already connected input, wire highlight will become red.
Sergey Surkov <surkovsv93@gmail.com> [Tue, 18 Oct 2016 17:44:08 +0300] rev 1544
Fix bug with two or more wires connected to one input. Now only one wire can be connected to one input, except BOOLean signals in LD and SFC. If user trying to connect wire with already connected input, wire highlight will become red.
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>

Fri, 14 Oct 2016 18:04:22 +0300fix issue with sequence of multiple whitespaces in makefile command
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 14 Oct 2016 18:04:22 +0300] rev 1543
fix issue with sequence of multiple whitespaces in makefile command
line from project configuration

for every additional whitespace '""' was inserted in result command line.

Fri, 14 Oct 2016 14:03:38 +0300fix minor issue and do some cleanup work in genericmake example
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 14 Oct 2016 14:03:38 +0300] rev 1542
fix minor issue and do some cleanup work in genericmake example

Wed, 12 Oct 2016 17:53:18 +0300cleanup python example
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 12 Oct 2016 17:53:18 +0300] rev 1541
cleanup python example

Thu, 06 Oct 2016 11:30:04 +0300complete fix in commit 3518d10 for wxgtk2.8
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 06 Oct 2016 11:30:04 +0300] rev 1540
complete fix in commit 3518d10 for wxgtk2.8