Surkov Sergey <surkovsv93@gmail.com> [Wed, 11 Jan 2017 11:40:53 +0300] rev 1623
clean search result panel after open another project
Surkov Sergey <surkovsv93@gmail.com> [Tue, 10 Jan 2017 13:45:56 +0300] rev 1622
fix highlight of search result in Search Result Panel
Remove previous highlight, after next search result clicked.
Surkov Sergey <surkovsv93@gmail.com> [Tue, 10 Jan 2017 14:08:49 +0300] rev 1621
fix doubling search results in Search Result Panel
After fix local search in SFC POU in 163d3a8, search results tree assemble with "children" branches: results of search in actions anf transitions. Deleted code doubling this search results into one more separate branch, so it's useless.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 29 Dec 2016 18:41:38 +0300] rev 1620
make FindInPouDialog work on Windows with wxPython 2.8
additional fix for changeset 474de7f
Surkov Sergey <surkovsv93@gmail.com> [Thu, 29 Dec 2016 18:36:00 +0300] rev 1619
fix local search in actions and transitions
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 28 Dec 2016 19:05:28 +0300] rev 1618
convert FindInPouDialog from wx.Frame to wx.Dialog
In this case FindInPouDialog Windows isn't listed in windows manager
on Alt-Tab. And it's not shown on top of other applications. For
example, previously the dialog was shown even on top of web browser or
word processor.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 28 Dec 2016 17:10:04 +0300] rev 1617
temporary disable SFC transitions in IL, because matiec can't compile it
matiec freezes in this case.
See https://bitbucket.org/mjsousa/matiec/issues/58/iec2c-freezes-if-sfc-transition-is-in-il
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 28 Dec 2016 16:33:50 +0300] rev 1616
fix issue with creating SFC transitions using ST and IL
Beremiz generates text representation for transitions without names.
Therefore transition name in its IL code is not needed.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 26 Dec 2016 14:01:54 +0300] rev 1615
replace '-' with '.' in resource tab and transition/action SFC code
This makes tab names consistent with the way the same information is shown in variable panel.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 26 Dec 2016 13:49:38 +0300] rev 1614
check during program generation whether source signal is defined for single task
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 23 Dec 2016 18:40:31 +0300] rev 1613
fix strange behavior on Backspace press in ST
Before:
if text was selected and cursor was at indention, one indention (two
spaces) was removed.
if cursor was at start position of the line, then nothing happened.
if cursor was in the middle of indention then on backspace more
indention were added
Now:
if text is selected, it will be removed.
if cursor is at start position, then new line will be removed.
if cursor was in the middle of indention one indention is removed.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 22 Dec 2016 17:39:58 +0300] rev 1612
fix close button in system menu for AboutDialog on Windows
If SetEscapeId receives wx.ID_CLOSE as parameter, then on Windows with
wxPython 2.8 system close button in title bar stops working.
If wx.ID_CANCEL or wx.ID_OK is used in SetEscapeId call, then close
button works correctly.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 22 Dec 2016 14:38:56 +0300] rev 1611
make renames caseinsensitive
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 20 Dec 2016 17:11:36 +0300] rev 1610
fix problem with SFC action/transition rename
Traceback (most recent call last):
File "/home/developer/WorkData/PLC/beremiz/beremiz/IDEFrame.py", line
1636, in OnProjectTreeItemEndEdit
elif new_name.upper() in [name.upper() for name in
self.Controler.GetProjectPouVariableNames(pou_name) if name !=
old_name]:
NameError: global name 'pou_name' is not defined
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 20 Dec 2016 14:41:10 +0300] rev 1609
fix problem that it was impossible to edit SFC jump, if it references non-existent SFC step
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 20 Dec 2016 13:26:54 +0300] rev 1608
remove all corresponding SFC jumps when SFC step is removed (but only in DRIVENDRAWING_MODE)
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 20 Dec 2016 13:26:24 +0300] rev 1607
rename all corresponding SFC jumps when SFC step is renamed (but only in DRIVENDRAWING_MODE)
Sergey Surkov <surkovsv93@gmail.com> [Wed, 14 Dec 2016 13:14:45 +0300] rev 1606
add check of new project path in Save As
add dialog window if selected directory is the current directory project, or already contains another project
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 14 Dec 2016 12:44:30 +0300] rev 1605
fix issue that in Debug mode LD instance doesn't show correctly its state after
continuation of FBD_Connector.
Previously state signals doesn't propogate through FBD_Connector.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 14 Dec 2016 12:36:04 +0300] rev 1604
fix issue with task rename if "Name" column label is translated into
other language
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 14 Dec 2016 12:31:06 +0300] rev 1603
fix issue with compiling SFC POU with non-connected transition (type "connection")
Sergey Surkov <surkovsv93@gmail.com> [Tue, 13 Dec 2016 17:47:34 +0300] rev 1602
fix bug with recent projects menu, remove path to the project from menu, if project directory doesn't exist
Sergey Surkov <surkovsv93@gmail.com> [Tue, 13 Dec 2016 17:40:03 +0300] rev 1601
fix bug with empty directories in recent projects menu
remove path to a project from recent projects menu, if project directory is empty
Sergey Surkov <surkovsv93@gmail.com> [Mon, 12 Dec 2016 14:29:40 +0300] rev 1600
fix list of recent projects in File menu, add path to current project after Save As
Sergey Surkov <surkovsv93@gmail.com> [Thu, 08 Dec 2016 17:54:43 +0300] rev 1599
by default init input and output in step sfc block, and output for initial step sfc block
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 19:28:13 +0300] rev 1598
update PLC status after initialization
This is necessary especially if existed PLC program is loaded, but PLC
is not started automatically. In this case taskbar icon shows that PLC
isn't empty.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 19:25:58 +0300] rev 1597
always load existing PLC program from the working directory
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 19:24:16 +0300] rev 1596
stop PLC before unloading
This fixes segmentation fault if service was quit without stopping it.
It has happened if Beremiz service was quit using taskbar icon or by
closing Beremiz IDE (in case of autostarted local service).
In second case to trigger the bug following step has to be done:
1. Open Beremiz IDE
2. Open project, compile and connect to LOCAL:// runtime
3. Transfer and start the PLC program
4. Open other project without disconneting the PLC runtime
5. Close Beremiz IDE
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 18:32:34 +0300] rev 1595
add internatialization support for Beremiz_service.py
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 18:25:37 +0300] rev 1594
fix issue with changing annonced Pyro service name via taskbar icon
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 18:23:59 +0300] rev 1593
don't crash on trying to change IP interface for Beremiz_service using taskbar icon if IP wasn't previously
By default IP is not set (None) and service listen only on localhost interface.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 18:15:04 +0300] rev 1592
start/stop from taskbar icon only if PLC is stopped/started
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 17:54:41 +0300] rev 1591
close Pyro socket after daemon stop
without that socket port is open after daemon shutdown.
As a result if you restart daemon with new settings (service name, for example),
it can't listen on already used port and opens the next free TCP port
regardless of requested settings.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 17:51:20 +0300] rev 1590
add python-wxgtk3.0 support to Beremiz_service.py
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 02 Dec 2016 17:48:26 +0300] rev 1589
make about dialog on Windows not so big
It was automatically expanded to place description in one line.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 01 Dec 2016 18:31:10 +0300] rev 1588
update Russian translation
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 01 Dec 2016 18:30:34 +0300] rev 1587
add i18n to PLC status
Extra strings are added to the code to make mki18n.py to find these
strings in source files and put them into i18n/messages.pot.
Sergey Surkov <surkovsv93@gmail.com> [Thu, 01 Dec 2016 16:59:16 +0300] rev 1586
remove clear and reset execution order buttons in popup menu in SFC and LD viewers.
Sergey Surkov <surkovsv93@gmail.com> [Thu, 01 Dec 2016 16:52:28 +0300] rev 1585
fix initial(equal to the min) number of sequences in SFC Divergence dialog.
Sergey Surkov <surkovsv93@gmail.com> [Thu, 01 Dec 2016 16:40:49 +0300] rev 1584
make only correct blocks(by IEC 61131-3 standard) available in wire popup menu in SFC Viewer
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 30 Nov 2016 14:27:18 +0300] rev 1583
move EnhancedStatusBar.py to the right location
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 29 Nov 2016 11:41:09 +0300] rev 1582
add internatialization support to startup messages during checking software updates
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 28 Nov 2016 16:47:01 +0300] rev 1581
fix translation strings with multiple parameters
this fixes a lot of warnings given by msgmerge:
../PLCOpenEditor.py:196: warning: 'msgid' format string with unnamed arguments cannot be properly localized:
The translator cannot reorder the arguments.
Please consider using a format string with named arguments,
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 28 Nov 2016 16:27:24 +0300] rev 1580
change bug report address for PLCOpenEditor to beremiz-devel@lists.sourceforge.net
make error message to be the same as in Beremiz IDE
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 28 Nov 2016 16:12:27 +0300] rev 1579
fix segmentation fault on clicking red point in compilation console if that compilation error coverts several units in plcopen file
closes #11
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 24 Nov 2016 18:33:56 +0300] rev 1578
add localization to time strings in DebugVariablePanel and to dialog shown after variable drag'n'drop
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 24 Nov 2016 15:46:17 +0300] rev 1577
fix issue that if located variable was dropped in location column, then address was changed in wrong row (row - 1).
It's not neccessary to carry about label size. YToRow() does the work.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 24 Nov 2016 15:37:03 +0300] rev 1576
increase size for time buttons in LogViewer
The buttons are slightly bigger now. This gives more space for label
translations in other languages.
closes #12
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 24 Nov 2016 13:17:06 +0300] rev 1575
don't rebuild the makefile based project if only companyName, projectName or productName are changed
And this fix current encoding issues, because all these information fields can
contain non-latin characters.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 22 Nov 2016 18:42:48 +0300] rev 1574
add progress bar to status bar
It can be used to display progress during program upload.
To use it call ShowPLCProgress (like ShowPLCProgress("transfered",
10)) in your PLCObject implementation.
ctbenergy <ewald.weinahndl@gmail.com> [Sat, 19 Nov 2016 23:42:49 +0100] rev 1573
fix warning: 'return' with no value in function startPLC
ctbenergy <ewald.weinahndl@gmail.com> [Sat, 19 Nov 2016 22:20:19 +0100] rev 1572
fix inconsistent whitespace
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 18 Nov 2016 13:57:42 +0300] rev 1571
fix license notices in source files and license files under GPLv2+
Previously a lot of files were referenced to GNU Public License 2.1,
which never existed.
All copyright attributions are kept the same.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 17 Nov 2016 22:57:20 +0300] rev 1570
fix PLC autostart option for Beremiz_service.py
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 17 Nov 2016 22:41:41 +0300] rev 1569
remove old debug code
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 17 Nov 2016 14:11:48 +0300] rev 1568
fix wrong font family in CustromGrid control
closes #10
Sergey Surkov <surkovsv93@gmail.com> [Thu, 17 Nov 2016 14:04:44 +0300] rev 1567
now only correct chart can be created in SFC Viewer
if user trying to connect incompatible blocks (by IEC 61131-3 standard), wire highlight will become red
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 17 Nov 2016 13:48:36 +0300] rev 1566
add Russian translations for About dialogs
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 17 Nov 2016 13:48:04 +0300] rev 1565
make about dialog boxes use standard wx about dialogs
Any information in dialog can be easily changed without much effort
and the dialog can be easy translated.
Unfortunately on Windows there is no good standard about dialog,
therefore own implementation is used there.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 08 Nov 2016 18:14:30 +0300] rev 1564
fix highlighting error and warning messages with non-lating characters
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 08 Nov 2016 18:06:30 +0300] rev 1563
fix breaking non-latin description and comments in FBD, LD, SFC and
project settings after Undo operation
Sergey Surkov <surkovsv93@gmail.com> [Wed, 02 Nov 2016 14:23:24 +0300] rev 1562
fix borders of pull-down choice list box in Config tab, in Project Properties
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 01 Nov 2016 14:44:22 +0300] rev 1561
add version.py needed for previous commit '4ce8492'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 01 Nov 2016 14:03:14 +0300] rev 1560
add version with commit hash to 'About' dialogs for Beremiz IDE and PLCOpenEditor
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 31 Oct 2016 13:59:56 +0300] rev 1559
ignore generated bugreports and output of i18n script
Sergey Surkov <surkovsv93@gmail.com> [Fri, 28 Oct 2016 18:28:10 +0300] rev 1558
now dialogs Find and Search in Project can be closed with ESC button
Sergey Surkov <surkovsv93@gmail.com> [Fri, 28 Oct 2016 18:17:35 +0300] rev 1557
fix russian translation of "direction" in Find dialog
Sergey Surkov <surkovsv93@gmail.com> [Fri, 28 Oct 2016 18:11:43 +0300] rev 1556
fix major bugs in Find and Search in Project functionality.
fix case sensitive and regexp search, remove duplicating code
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 28 Oct 2016 17:21:42 +0300] rev 1555
fix issue with non-updated button 'generated IECCode' after Build and Clean
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 27 Oct 2016 17:07:44 +0300] rev 1554
increase dialog size for edit SFC transition, so buttons are visible
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 27 Oct 2016 16:24:13 +0300] rev 1553
fix issue that sometimes period for cyclic task wasn't saved.
This is complete fix for the problem described in 8626bba.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 27 Oct 2016 15:31:43 +0300] rev 1552
add first steps example, that shows how use all IEC 61131 languages
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 26 Oct 2016 19:13:26 +0300] rev 1551
fix issue with empty frame with generated ST code
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 26 Oct 2016 15:51:20 +0300] rev 1550
fix not saving location address from variable panel
this regression was introduced by commit 3518d10
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 24 Oct 2016 18:02:53 +0300] rev 1549
add $(Beremiz installation)/mingw/bin in PATH on Windows platform
This fixes issue if multiple gcc installation are found in user's
PATH. Now gcc from Beremiz is used by default.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 21 Oct 2016 13:06:31 +0300] rev 1548
fix issue with non-working global hotkeys in IEC code panel
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 20 Oct 2016 14:45:27 +0300] rev 1547
add more comments to svgui example
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 20 Oct 2016 14:45:11 +0300] rev 1546
cleanup traffic lights example
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 19 Oct 2016 16:32:10 +0300] rev 1545
cleanup svgui example
Sergey Surkov <surkovsv93@gmail.com> [Tue, 18 Oct 2016 17:44:08 +0300] rev 1544
Fix bug with two or more wires connected to one input. Now only one wire can be connected to one input, except BOOLean signals in LD and SFC. If user trying to connect wire with already connected input, wire highlight will become red.
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 14 Oct 2016 18:04:22 +0300] rev 1543
fix issue with sequence of multiple whitespaces in makefile command
line from project configuration
for every additional whitespace '""' was inserted in result command line.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 14 Oct 2016 14:03:38 +0300] rev 1542
fix minor issue and do some cleanup work in genericmake example
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 12 Oct 2016 17:53:18 +0300] rev 1541
cleanup python example
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 06 Oct 2016 11:30:04 +0300] rev 1540
complete fix in commit 3518d10 for wxgtk2.8
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 05 Oct 2016 18:11:52 +0300] rev 1539
fix syncronization issue during killing ProcessLoggers on IDE close
Sergey Surkov <surkovsv93@gmail.com> [Wed, 05 Oct 2016 18:01:28 +0300] rev 1538
Add russian translation on label "Tick" in debug variable panel.
Sergey Surkov <surkovsv93@gmail.com> [Wed, 05 Oct 2016 10:07:10 +0300] rev 1537
Add russian language in Project properties -> Other menu.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 04 Oct 2016 18:01:08 +0300] rev 1536
fix issue, that was impossible to change variable location IEC-address, when wx 3.0 is used
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 04 Oct 2016 17:43:30 +0300] rev 1535
Merge
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 04 Oct 2016 17:26:38 +0300] rev 1534
fix infinite recursion in 'Reset Execution Order' functionality if FBD body contains feedback connections
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 13 Sep 2016 21:42:11 +0300] rev 1533
fix issues in PLCOpenEditor with moving from wxWidgets 2.8 to 3.0
1)
./PLCOpenEditor.py:63: wxPyDeprecationWarning: Using deprecated class PySimpleApp.
app = wx.PySimpleApp()
2)
./PLCOpenEditor.py:475: wxPyDeprecationWarning: Call to deprecated item.
wx.InitAllImageHandlers()
3)
Traceback (most recent call last):
File "./PLCOpenEditor.py", line 480, in <module>
frame = PLCOpenEditor(None, fileOpen=fileOpen)
File "./PLCOpenEditor.py", line 163, in __init__
IDEFrame.__init__(self, parent)
File "/tmp/f/beremiz/IDEFrame.py", line 657, in __init__
self._init_ctrls(parent)
File "/tmp/f/beremiz/IDEFrame.py", line 485, in _init_ctrls
self._init_icon(prnt)
File "/tmp/f/beremiz/IDEFrame.py", line 476, in _init_icon
if self.icon:
AttributeError: 'PLCOpenEditor' object has no attribute 'icon'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 12 Sep 2016 16:49:24 +0300] rev 1532
update messages and add Russian translation for new menu entry 'switch perspective'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 12 Sep 2016 16:46:09 +0300] rev 1531
Merged in Surkovsv/beremiz (pull request #4)
Add hotkey (F12) for switching perspective.
Sergey Surkov <surkovsv93@gmail.com> [Mon, 12 Sep 2016 16:41:21 +0300] rev 1530
Add hotkey (F12) for switching perspective.
Switching perspective feature hides/restores all panels except of the main editor window for current FB.
So all available screen space is used for editor.
Paul Beltyukov <beltyukov.p.a@gmail.com> [Mon, 12 Sep 2016 10:15:39 +0500] rev 1529
Merged skvorl/beremiz into default
alexander@macbook-pro-alexander.local [Sat, 10 Sep 2016 11:19:40 +0500] rev 1528
Fixed crash when starts on OS X with wxPython 3.0.x