Sun, 07 Jun 2020 19:33:32 +0100Modbus plugin: fix bug: was checking user configuration against wrong limits
Mario de Sousa <msousa@fe.up.pt> [Sun, 07 Jun 2020 19:33:32 +0100] rev 2664
Modbus plugin: fix bug: was checking user configuration against wrong limits

Sun, 07 Jun 2020 18:34:32 +0100Modbus plugin: fix algorithm detecting Modbus TCP servers using the same IP port on the same network interface
Mario de Sousa <msousa@fe.up.pt> [Sun, 07 Jun 2020 18:34:32 +0100] rev 2663
Modbus plugin: fix algorithm detecting Modbus TCP servers using the same IP port on the same network interface

Sun, 07 Jun 2020 12:28:21 +0100Modbus plugin: check for duplicate "Configuration_Name"
Mario de Sousa <msousa@fe.up.pt> [Sun, 07 Jun 2020 12:28:21 +0100] rev 2662
Modbus plugin: check for duplicate "Configuration_Name"

Sat, 06 Jun 2020 08:51:32 +0100add comment
Mario de Sousa <msousa@fe.up.pt> [Sat, 06 Jun 2020 08:51:32 +0100] rev 2661
add comment

Sat, 06 Jun 2020 08:50:36 +0100add comment
Mario de Sousa <msousa@fe.up.pt> [Sat, 06 Jun 2020 08:50:36 +0100] rev 2660
add comment

Sat, 06 Jun 2020 08:43:41 +0100merge
Mario de Sousa <msousa@fe.up.pt> [Sat, 06 Jun 2020 08:43:41 +0100] rev 2659
merge

Sat, 06 Jun 2020 07:34:02 +0100Modbus plugin web configuration: fix comments, and delete un-used code
Mario de Sousa <msousa@fe.up.pt> [Sat, 06 Jun 2020 07:34:02 +0100] rev 2658
Modbus plugin web configuration: fix comments, and delete un-used code

Sat, 06 Jun 2020 07:24:42 +0100Modbus plugin web configuration: use drop down choices for baud, parity and stop bits.
Mario de Sousa <msousa@fe.up.pt> [Sat, 06 Jun 2020 07:24:42 +0100] rev 2657
Modbus plugin web configuration: use drop down choices for baud, parity and stop bits.

Fri, 05 Jun 2020 18:02:12 +0100Modbus plugin web configuration: save node type and addr type to persistant storage
Mario de Sousa <msousa@fe.up.pt> [Fri, 05 Jun 2020 18:02:12 +0100] rev 2656
Modbus plugin web configuration: save node type and addr type to persistant storage

Mon, 01 Jun 2020 14:11:22 +0100Add web extension: configure Modbus Server plugin parameters
Mario de Sousa <msousa@fe.up.pt> [Mon, 01 Jun 2020 14:11:22 +0100] rev 2655
Add web extension: configure Modbus Server plugin parameters

Mon, 01 Jun 2020 08:54:26 +0100Add web extension: configure Modbus plugin parameters (currently only supports Modbus clients)
Mario de Sousa <msousa@fe.up.pt> [Mon, 01 Jun 2020 08:54:26 +0100] rev 2654
Add web extension: configure Modbus plugin parameters (currently only supports Modbus clients)

Tue, 02 Jun 2020 13:37:34 +0200Runtime: create .md5 file at the end of all transfered files being written to disk, so that it presence indicates completeness of transfer.
Edouard Tisserant [Tue, 02 Jun 2020 13:37:34 +0200] rev 2653
Runtime: create .md5 file at the end of all transfered files being written to disk, so that it presence indicates completeness of transfer.

Tue, 02 Jun 2020 11:34:50 +0200IDE: Main toolbar : Show repair button also in stop mode. Move repair button after disconnect button.
Edouard Tisserant [Tue, 02 Jun 2020 11:34:50 +0200] rev 2652
IDE: Main toolbar : Show repair button also in stop mode. Move repair button after disconnect button.

Mon, 01 Jun 2020 14:47:31 +0200Runtime: fsync() files when transfering them, to prebent data loss when poweroff soon after programming. Fixed variable naming as a side effect.
Edouard Tisserant [Mon, 01 Jun 2020 14:47:31 +0200] rev 2651
Runtime: fsync() files when transfering them, to prebent data loss when poweroff soon after programming. Fixed variable naming as a side effect.

Thu, 28 May 2020 11:16:59 +0100merge
Mario de Sousa <msousa@fe.up.pt> [Thu, 28 May 2020 11:16:59 +0100] rev 2650
merge

Thu, 28 May 2020 11:15:22 +0100BACnet plugin: Add web interface for online parameter configuration
Mario de Sousa <msousa@fe.up.pt> [Thu, 28 May 2020 11:15:22 +0100] rev 2649
BACnet plugin: Add web interface for online parameter configuration

Thu, 28 May 2020 11:01:42 +0100modbus_plugin: generate nicer error message, instead of a traceback
Mario de Sousa <msousa@fe.up.pt> [Thu, 28 May 2020 11:01:42 +0100] rev 2648
modbus_plugin: generate nicer error message, instead of a traceback

Thu, 28 May 2020 10:54:48 +0100Modbus plugin: Add "exec. req. flag" and "write on change" features
Mario de Sousa <msousa@fe.up.pt> [Thu, 28 May 2020 10:54:48 +0100] rev 2647
Modbus plugin: Add "exec. req. flag" and "write on change" features

Thu, 28 May 2020 11:38:09 +0200PLCObject : reorganize code in StartPLC(), add a PreStartPLC() empty method, to be overloaded by runtime extensions.
Edouard Tisserant [Thu, 28 May 2020 11:38:09 +0200] rev 2646
PLCObject : reorganize code in StartPLC(), add a PreStartPLC() empty method, to be overloaded by runtime extensions.

Tue, 26 May 2020 09:58:20 +0200Solve import order problem when POULibrary imports ConfigTreeNode because of UserAddressedException. Now UserAddressedException is declared in POULibrary.py, as a quick and dirty fix, but some independant module should be created for beremiz exceptions in general.
Edouard Tisserant [Tue, 26 May 2020 09:58:20 +0200] rev 2645
Solve import order problem when POULibrary imports ConfigTreeNode because of UserAddressedException. Now UserAddressedException is declared in POULibrary.py, as a quick and dirty fix, but some independant module should be created for beremiz exceptions in general.

Wed, 18 Dec 2019 13:31:22 +0100Add --on-plc-start --on-plc-stop and --status-change to runtime command line, calling given command respectively on start stop or any event. Command line string is python formated (to eventually include status with {}) before being split (supports quoted strings) and passed to Popen for non-blocking execution.
Edouard Tisserant [Wed, 18 Dec 2019 13:31:22 +0100] rev 2644
Add --on-plc-start --on-plc-stop and --status-change to runtime command line, calling given command respectively on start stop or any event. Command line string is python formated (to eventually include status with {}) before being split (supports quoted strings) and passed to Popen for non-blocking execution.

Mon, 25 Nov 2019 08:10:45 +0100Etherlab : Merged 2014-2018 changes from jblee and others
Edouard Tisserant <edouard.tisserant@gmail.com> [Mon, 25 Nov 2019 08:10:45 +0100] rev 2643
Etherlab : Merged 2014-2018 changes from jblee and others

Mon, 25 Nov 2019 08:26:55 +0100Close branch ethercat_from_kosmos ethercat_from_kosmos
Edouard Tisserant <edouard.tisserant@gmail.com> [Mon, 25 Nov 2019 08:26:55 +0100] rev 2642
Close branch ethercat_from_kosmos

Wed, 20 Nov 2019 16:57:15 +0100EtherCat master plugin : commit changes recovered from KOSMOS 2018 installer, unkown author(s). ethercat_from_kosmos
Edouard Tisserant <edouard.tisserant@gmail.com> [Wed, 20 Nov 2019 16:57:15 +0100] rev 2641
EtherCat master plugin : commit changes recovered from KOSMOS 2018 installer, unkown author(s).

Wed, 13 Nov 2019 11:21:04 +0100Add FatalError() method to ConfigTreeNode.
Edouard Tisserant [Wed, 13 Nov 2019 11:21:04 +0100] rev 2640
Add FatalError() method to ConfigTreeNode.
Extensions can report error addressed to user, without a traceback.

Thu, 24 Oct 2019 11:20:04 +0200Fixed one more sequel of marking temporary variables created while generating ST code out of FBD
Edouard Tisserant <edouard.tisserant@gmail.com> [Thu, 24 Oct 2019 11:20:04 +0200] rev 2639
Fixed one more sequel of marking temporary variables created while generating ST code out of FBD

Wed, 09 Oct 2019 09:04:35 +0200Changed yslt_noindent.yml2 again
Edouard Tisserant [Wed, 09 Oct 2019 09:04:35 +0200] rev 2638
Changed yslt_noindent.yml2 again

Wed, 25 Sep 2019 08:53:27 +0200Non significant changes in generated xslt, side effect of changes in yslt_noindent.yml2
Edouard Tisserant [Wed, 25 Sep 2019 08:53:27 +0200] rev 2637
Non significant changes in generated xslt, side effect of changes in yslt_noindent.yml2

Thu, 19 Sep 2019 15:32:36 +0200More customizations to yslt
Edouard Tisserant [Thu, 19 Sep 2019 15:32:36 +0200] rev 2636
More customizations to yslt

Wed, 18 Sep 2019 11:03:56 +0200PLCobject: Call "stop" and "cleanup" methods from python runtime files in reverse order compared to "init" and "start".
Edouard Tisserant [Wed, 18 Sep 2019 11:03:56 +0200] rev 2635
PLCobject: Call "stop" and "cleanup" methods from python runtime files in reverse order compared to "init" and "start".

Wed, 11 Sep 2019 11:20:11 +0200Non significant changes to mute GCC warnings about unused variables.
Edouard Tisserant [Wed, 11 Sep 2019 11:20:11 +0200] rev 2634
Non significant changes to mute GCC warnings about unused variables.

Thu, 05 Sep 2019 08:35:33 +0200Fixed sequel of earlier commit in PLCGenerator.py. Some ref to temporary variables are still not using the _TMP_ prefix. They are quite hard to find, so to be continued...
Edouard Tisserant [Thu, 05 Sep 2019 08:35:33 +0200] rev 2633
Fixed sequel of earlier commit in PLCGenerator.py. Some ref to temporary variables are still not using the _TMP_ prefix. They are quite hard to find, so to be continued...

Mon, 26 Aug 2019 08:54:02 +0200variable access code moved from plc_debug.c to targets/var_access.c for easiewr re-use in ext.
Edouard Tisserant [Mon, 26 Aug 2019 08:54:02 +0200] rev 2632
variable access code moved from plc_debug.c to targets/var_access.c for easiewr re-use in ext.

Tue, 20 Aug 2019 10:08:11 +0200Swap CTN code gen and Libraries code generation order. In general library part of an extension needs to be computed before CTN part.
Edouard Tisserant [Tue, 20 Aug 2019 10:08:11 +0200] rev 2631
Swap CTN code gen and Libraries code generation order. In general library part of an extension needs to be computed before CTN part.

Tue, 20 Aug 2019 10:01:18 +0200yslt_noindent : Avoid YSLT's indent logic to interfere when using linequote.
Edouard Tisserant [Tue, 20 Aug 2019 10:01:18 +0200] rev 2630
yslt_noindent : Avoid YSLT's indent logic to interfere when using linequote.

Wed, 14 Aug 2019 11:05:17 +0200Add marker to temporary variables created while generating ST code out of FBD, so that they can be recognized as such.
Edouard Tisserant [Wed, 14 Aug 2019 11:05:17 +0200] rev 2629
Add marker to temporary variables created while generating ST code out of FBD, so that they can be recognized as such.

Mon, 12 Aug 2019 13:06:11 +0200Allow using docutil.get_inkscape_path() on Linux also.
Edouard Tisserant [Mon, 12 Aug 2019 13:06:11 +0200] rev 2628
Allow using docutil.get_inkscape_path() on Linux also.

Fri, 09 Aug 2019 12:07:33 +0200Moved XSLT model query python code so that XSLT part can be reused for other transformations
Edouard Tisserant [Fri, 09 Aug 2019 12:07:33 +0200] rev 2627
Moved XSLT model query python code so that XSLT part can be reused for other transformations

Tue, 24 Sep 2019 11:55:59 +0200Fixed unitialized parameter in instances_path stylesheet, leading to
Edouard Tisserant [Tue, 24 Sep 2019 11:55:59 +0200] rev 2626
Fixed unitialized parameter in instances_path stylesheet, leading to
calls to add_instance with no data when passing datatypes insteatd of project
root. That bug was making exceptions (for exemple when editing type) when
having arrays of derivated types in project.

Sun, 14 Jul 2019 08:43:12 +0200Fixed code quality according to pep8 and pylint.
Edouard Tisserant <edouard.tisserant@gmail.com> [Sun, 14 Jul 2019 08:43:12 +0200] rev 2625
Fixed code quality according to pep8 and pylint.

Sat, 13 Jul 2019 10:57:25 +0200Fix exception on exit in some case, sequel of an earlier cleanup commit I couldn't find back. Disconnecting the event is apparently the way to go. https://wiki.wxpython.org/Surviving%20with%20wxEVT%20KILL%20FOCUS%20under%20Microsoft%20Windows
Edouard Tisserant <edouard.tisserant@gmail.com> [Sat, 13 Jul 2019 10:57:25 +0200] rev 2624
Fix exception on exit in some case, sequel of an earlier cleanup commit I couldn't find back. Disconnecting the event is apparently the way to go. https://wiki.wxpython.org/Surviving%20with%20wxEVT%20KILL%20FOCUS%20under%20Microsoft%20Windows

Fri, 12 Jul 2019 11:53:04 +0200PurgeBlobs was faulty, but it was never having anything to purge. Fixed.
Edouard Tisserant [Fri, 12 Jul 2019 11:53:04 +0200] rev 2623
PurgeBlobs was faulty, but it was never having anything to purge. Fixed.

Fri, 12 Jul 2019 11:51:47 +0200Fixed repetitive freezing of IDE when connection drops.
Edouard Tisserant [Fri, 12 Jul 2019 11:51:47 +0200] rev 2622
Fixed repetitive freezing of IDE when connection drops.
when connection lost error was beeing displayed, the involved wxYield
was calling pending plc status periodic update, itself trying to use connector.
At that time connector is still not destroyed and connection
is attempted again when calling GetPLCStatus.
=> Hack : Ensure connector is destroyed before reporting error.

Wed, 10 Jul 2019 11:21:13 +0200Better error handling when blob transfer fail
Edouard Tisserant [Wed, 10 Jul 2019 11:21:13 +0200] rev 2621
Better error handling when blob transfer fail

Wed, 10 Jul 2019 10:43:14 +0200Removed dead code.
Edouard Tisserant [Wed, 10 Jul 2019 10:43:14 +0200] rev 2620
Removed dead code.

Tue, 09 Jul 2019 09:49:30 +0200Now expects 1 more columns in VARIABLE.CSV file generated by MatIEC. Pair with MatIEC commit 9cb7c8bf7dbc :
Edouard Tisserant [Tue, 09 Jul 2019 09:49:30 +0200] rev 2619
Now expects 1 more columns in VARIABLE.CSV file generated by MatIEC. Pair with MatIEC commit 9cb7c8bf7dbc :
Add a column to VARIABLES.CSV, containing variable (derived) type name, additionally to current last column contyaining base type name

Tue, 18 Jun 2019 14:09:23 +0200Merged workaround for loading bug happening after automatic resize of function blocks. It appears that some code in GraphicCommons.py loop endlessly when wires coordinate do not align with x or y axis. Those erroneous coordinate are now filtered out when loaded in the view.
Edouard Tisserant [Tue, 18 Jun 2019 14:09:23 +0200] rev 2618
Merged workaround for loading bug happening after automatic resize of function blocks. It appears that some code in GraphicCommons.py loop endlessly when wires coordinate do not align with x or y axis. Those erroneous coordinate are now filtered out when loaded in the view.

Tue, 18 Jun 2019 14:03:08 +0200Removed debug code and closed branch fix_fb_resize_wire_bug
Edouard Tisserant [Tue, 18 Jun 2019 14:03:08 +0200] rev 2617
Removed debug code and closed branch

Tue, 18 Jun 2019 13:58:45 +0200GraphicCommons.py : Wire.SetPoints() move filtering before computation of Start and End points to avoid setting them with arbitrary directions. fix_fb_resize_wire_bug
Edouard Tisserant [Tue, 18 Jun 2019 13:58:45 +0200] rev 2616
GraphicCommons.py : Wire.SetPoints() move filtering before computation of Start and End points to avoid setting them with arbitrary directions.

Tue, 18 Jun 2019 09:38:20 +0200GraphicCommons.py : rewrote Wire.Setpoints. fix_fb_resize_wire_bug
Edouard Tisserant [Tue, 18 Jun 2019 09:38:20 +0200] rev 2615
GraphicCommons.py : rewrote Wire.Setpoints.
- trying to make it fix diagonal wires,
- wasn't clear what was intended before, so made it clear :
- duplicate point removal
- segment merging (only if asked)
- remove corners made of opposite direction segments

Thu, 13 Jun 2019 15:49:48 +0200'Change POU Type To' becomes 'Duplicate as...', avoiding side effects of type change when POU is already instanciated. Also remove leftover returType tag in ex-function POUs, triggering exceptions at build time.
Edouard Tisserant [Thu, 13 Jun 2019 15:49:48 +0200] rev 2614
'Change POU Type To' becomes 'Duplicate as...', avoiding side effects of type change when POU is already instanciated. Also remove leftover returType tag in ex-function POUs, triggering exceptions at build time.

Thu, 06 Jun 2019 14:03:16 +0200Fix PLCObject's purge failing silently with extra_files.
Edouard Tisserant [Thu, 06 Jun 2019 14:03:16 +0200] rev 2613
Fix PLCObject's purge failing silently with extra_files.

Thu, 30 May 2019 11:53:13 +0200LogMessage shouldn't be serialized (can lead to blocking in case of exception in main thread), and do not require it.
Edouard Tisserant [Thu, 30 May 2019 11:53:13 +0200] rev 2612
LogMessage shouldn't be serialized (can lead to blocking in case of exception in main thread), and do not require it.

Thu, 30 May 2019 11:51:56 +0200Fixed typo leading to some exception in some rare corner cases in worker.py
Edouard Tisserant [Thu, 30 May 2019 11:51:56 +0200] rev 2611
Fixed typo leading to some exception in some rare corner cases in worker.py

Tue, 23 Apr 2019 11:01:35 +0200Added missing 'path' field to WAMP addresses in URI editor.
Edouard Tisserant [Tue, 23 Apr 2019 11:01:35 +0200] rev 2610
Added missing 'path' field to WAMP addresses in URI editor.

Tue, 23 Apr 2019 11:00:37 +0200Fixed exception when using URI editor for PYRO addresses
Edouard Tisserant [Tue, 23 Apr 2019 11:00:37 +0200] rev 2609
Fixed exception when using URI editor for PYRO addresses

Fri, 19 Apr 2019 13:11:42 +0200Avoid loading PLC at startup when autostart is not set in command line. As a side effect PLC status is artificially set to Stopped, and StartPLC eventually loads PLC if it is not already loaded.
Edouard Tisserant [Fri, 19 Apr 2019 13:11:42 +0200] rev 2608
Avoid loading PLC at startup when autostart is not set in command line. As a side effect PLC status is artificially set to Stopped, and StartPLC eventually loads PLC if it is not already loaded.

Fri, 19 Apr 2019 10:53:02 +0200Add Repair() to WAMP interface
Edouard Tisserant [Fri, 19 Apr 2019 10:53:02 +0200] rev 2607
Add Repair() to WAMP interface

Thu, 18 Apr 2019 14:42:23 +0200Merged fix_PLC_runtime_shutdown
Edouard Tisserant [Thu, 18 Apr 2019 14:42:23 +0200] rev 2606
Merged fix_PLC_runtime_shutdown

Thu, 18 Apr 2019 14:41:21 +0200Close fix_PLC_runtime_shutdown fix_PLC_runtime_shutdown
Edouard Tisserant [Thu, 18 Apr 2019 14:41:21 +0200] rev 2605
Close fix_PLC_runtime_shutdown

Thu, 18 Apr 2019 14:35:42 +0200Runtime worker : unblock the last waiting job and prevent any new job to wait when Main Worker is being shut down. fix_PLC_runtime_shutdown
Edouard Tisserant [Thu, 18 Apr 2019 14:35:42 +0200] rev 2604
Runtime worker : unblock the last waiting job and prevent any new job to wait when Main Worker is being shut down.

Thu, 18 Apr 2019 14:34:22 +0200Add some "pipe to self" trick in Pyro server to accelerate runtime shutdown instead of waiting for arbitrary pyro timeout. fix_PLC_runtime_shutdown
Edouard Tisserant [Thu, 18 Apr 2019 14:34:22 +0200] rev 2603
Add some "pipe to self" trick in Pyro server to accelerate runtime shutdown instead of waiting for arbitrary pyro timeout.

Thu, 18 Apr 2019 14:32:43 +0200If call to GetPLCstatus can't be executed in PLC, then obtained status is disconnected. Status on "None" is not relevant anymore, and is replaced by Disconnected. fix_PLC_runtime_shutdown
Edouard Tisserant [Thu, 18 Apr 2019 14:32:43 +0200] rev 2602
If call to GetPLCstatus can't be executed in PLC, then obtained status is disconnected. Status on "None" is not relevant anymore, and is replaced by Disconnected.

Thu, 18 Apr 2019 14:29:55 +0200Enure that all threads are joined before trying to exit fix_PLC_runtime_shutdown
Edouard Tisserant [Thu, 18 Apr 2019 14:29:55 +0200] rev 2601
Enure that all threads are joined before trying to exit

Wed, 17 Apr 2019 14:18:22 +0200Named runtime's threads to ease debugging
Edouard Tisserant [Wed, 17 Apr 2019 14:18:22 +0200] rev 2600
Named runtime's threads to ease debugging

Wed, 17 Apr 2019 14:15:39 +0200Added Repair() png icon
Edouard Tisserant [Wed, 17 Apr 2019 14:15:39 +0200] rev 2599
Added Repair() png icon

Tue, 16 Apr 2019 14:45:41 +0200pep8 again...
Edouard Tisserant <edouard.tisserant@gmail.com> [Tue, 16 Apr 2019 14:45:41 +0200] rev 2598
pep8 again...
./connectors/PYRO/PSK_Adapter.py:49:1: E302 expected 2 blank lines, found 1
./connectors/PYRO/PSK_Adapter.py:57:5: E303 too many blank lines (2)

Tue, 16 Apr 2019 13:32:32 +0200PEP8 fix : ./connectors/PYRO/PSK_Adapter.py:49:1: E302 expected 2 blank lines, found 1
Edouard Tisserant <edouard.tisserant@gmail.com> [Tue, 16 Apr 2019 13:32:32 +0200] rev 2597
PEP8 fix : ./connectors/PYRO/PSK_Adapter.py:49:1: E302 expected 2 blank lines, found 1

Tue, 16 Apr 2019 11:26:52 +0200Added RepairPLC() to PLCObject. For now just calling PurgePLC and quit PLC runtime.
Edouard Tisserant [Tue, 16 Apr 2019 11:26:52 +0200] rev 2596
Added RepairPLC() to PLCObject. For now just calling PurgePLC and quit PLC runtime.

Tue, 16 Apr 2019 11:26:34 +0200Ensure Beremiz_service.py quits properly when Main Worker stops and wa are using Wx and/or Twisted.
Edouard Tisserant [Tue, 16 Apr 2019 11:26:34 +0200] rev 2595
Ensure Beremiz_service.py quits properly when Main Worker stops and wa are using Wx and/or Twisted.

Mon, 15 Apr 2019 13:34:09 +0200Added PurgePLC() method to PLCObject, to be invoked when PLC Status is broken. It clears PLC shared object an extra files and force status to Empty. Added correponding Repair button to toolbar, visible only when PLC status is broken.
Edouard Tisserant [Mon, 15 Apr 2019 13:34:09 +0200] rev 2594
Added PurgePLC() method to PLCObject, to be invoked when PLC Status is broken. It clears PLC shared object an extra files and force status to Empty. Added correponding Repair button to toolbar, visible only when PLC status is broken.

Thu, 11 Apr 2019 13:45:27 +0200Background erase of debug variable panel was disabled for some reason, and it not anymore compatible with EVT_PAINT based refresh. It was leaving traces behind when removing traced variable. Fixed.
Edouard Tisserant [Thu, 11 Apr 2019 13:45:27 +0200] rev 2593
Background erase of debug variable panel was disabled for some reason, and it not anymore compatible with EVT_PAINT based refresh. It was leaving traces behind when removing traced variable. Fixed.

Thu, 11 Apr 2019 13:41:52 +0200force redraw only through EVT_PAINT event and use wxPaintDC, as described in wx documentation
Edouard Tisserant [Thu, 11 Apr 2019 13:41:52 +0200] rev 2592
force redraw only through EVT_PAINT event and use wxPaintDC, as described in wx documentation

Thu, 11 Apr 2019 11:26:47 +0200Fixed refresh problem following 9c5f835b031e, 9622418ac28c, c67488bd8134 : force redraw only through EVT_PAINT event and use wxPaintDC, as described in wx documentation
Edouard Tisserant [Thu, 11 Apr 2019 11:26:47 +0200] rev 2591
Fixed refresh problem following 9c5f835b031e, 9622418ac28c, c67488bd8134 : force redraw only through EVT_PAINT event and use wxPaintDC, as described in wx documentation

Thu, 11 Apr 2019 08:40:17 +0200merged
Edouard Tisserant <edouard.tisserant@gmail.com> [Thu, 11 Apr 2019 08:40:17 +0200] rev 2590
merged

Wed, 10 Apr 2019 14:11:52 +0200Nicer name than 'var_name' for variable auto-renaming in Modbus
Edouard Tisserant [Wed, 10 Apr 2019 14:11:52 +0200] rev 2589
Nicer name than 'var_name' for variable auto-renaming in Modbus

Wed, 10 Apr 2019 21:36:12 +0200Allow starting IDE without sslpsk module installed. Fail when connecting to PYROS if sslpsk unavailable.
Edouard Tisserant <edouard.tisserant@gmail.com> [Wed, 10 Apr 2019 21:36:12 +0200] rev 2588
Allow starting IDE without sslpsk module installed. Fail when connecting to PYROS if sslpsk unavailable.

Tue, 09 Apr 2019 14:08:44 +0200Fixed preview drawing/refresh problem in sfc/ld/fbd graphical element creation dialogs on windows (introduced in 9c5f835b031e, continuation of 9622418ac28c)
Edouard Tisserant [Tue, 09 Apr 2019 14:08:44 +0200] rev 2587
Fixed preview drawing/refresh problem in sfc/ld/fbd graphical element creation dialogs on windows (introduced in 9c5f835b031e, continuation of 9622418ac28c)

Tue, 09 Apr 2019 13:18:51 +0200pep8 white spaces
Edouard Tisserant [Tue, 09 Apr 2019 13:18:51 +0200] rev 2586
pep8 white spaces

Tue, 09 Apr 2019 13:13:27 +0200Now default_evaluator is provided by runtime package
Edouard Tisserant [Tue, 09 Apr 2019 13:13:27 +0200] rev 2585
Now default_evaluator is provided by runtime package

Tue, 09 Apr 2019 13:08:03 +0200merge
Edouard Tisserant <edouard.tisserant@gmail.com> [Tue, 09 Apr 2019 13:08:03 +0200] rev 2584
merge

Tue, 09 Apr 2019 13:05:35 +0200Continue fixing deadlock of previous commit, this time occuring when waiting for 'cleanup' python runtime call to finish. Now 'init' and 'cleanup' python runtime calls are called directly from main thread, and aren't anymore invoked in the context of wxMainloop and/or twisted reactor.
Edouard Tisserant [Tue, 09 Apr 2019 13:05:35 +0200] rev 2583
Continue fixing deadlock of previous commit, this time occuring when waiting for 'cleanup' python runtime call to finish. Now 'init' and 'cleanup' python runtime calls are called directly from main thread, and aren't anymore invoked in the context of wxMainloop and/or twisted reactor.

Tue, 09 Apr 2019 09:13:55 +0200Fix deadlock when indirectly calling PLCObject's evaluator() from twisted of wx event loops. Was freezing while transfer/start/stop through Wamp. Serialize all PLCObject's call to self.PythonRuntimeCall into the same PythonThread thread.
Edouard Tisserant [Tue, 09 Apr 2019 09:13:55 +0200] rev 2582
Fix deadlock when indirectly calling PLCObject's evaluator() from twisted of wx event loops. Was freezing while transfer/start/stop through Wamp. Serialize all PLCObject's call to self.PythonRuntimeCall into the same PythonThread thread.

Mon, 08 Apr 2019 12:53:18 +0200Fixed Wamp assertion because of unexpected type
Edouard Tisserant [Mon, 08 Apr 2019 12:53:18 +0200] rev 2581
Fixed Wamp assertion because of unexpected type

Thu, 28 Mar 2019 13:09:11 +0100Enhanced statistics display code, used it and saw no more noticable leak while editing. Closing branch. wx.NewID_abuse_fix
Edouard Tisserant [Thu, 28 Mar 2019 13:09:11 +0100] rev 2580
Enhanced statistics display code, used it and saw no more noticable leak while editing. Closing branch.

Sun, 07 Apr 2019 21:08:07 +0200Conform to pep8 and pylint :
Edouard Tisserant <edouard.tisserant@gmail.com> [Sun, 07 Apr 2019 21:08:07 +0200] rev 2579
Conform to pep8 and pylint :

pep8 version: 2.3.1
./ConfigTreeNode.py:130:49: E231 missing whitespace after ','
./editors/Viewer.py:643:24: E128 continuation line under-indented for visual indent
./editors/Viewer.py:670:12: E221 multiple spaces before operator
./editors/Viewer.py:671:13: E221 multiple spaces before operator
./editors/Viewer.py:2138:52: E203 whitespace before ':'
./editors/Viewer.py:2139:66: W291 trailing whitespace
./controls/VariablePanel.py:154:25: E231 missing whitespace after ','
./controls/LocationCellEditor.py:88:1: W293 blank line contains whitespace
./controls/LocationCellEditor.py:191:25: E221 multiple spaces before operator
./controls/LocationCellEditor.py:200:17: E128 continuation line under-indented for visual indent

pylint 1.8.3,
************* Module controls.LocationCellEditor
controls/LocationCellEditor.py:200: [C0330(bad-continuation), ] Wrong continued indentation (add 9 spaces).
_("Selected location is identical to previous one"))
^ |
************* Module controls.VariablePanel
controls/VariablePanel.py:154: [E1601(print-statement), VariableTable.SetValue] print statement used
************* Module editors.Viewer
editors/Viewer.py:643: [C0330(bad-continuation), ] Wrong continued indentation (add 1 space).
self.GetAddMenuCallBack(self.AddNewComment))
^|
editors/Viewer.py:598: [W0612(unused-variable), Viewer.AddDivergenceMenuItems] Unused variable 'add_branch'
editors/Viewer.py:1655: [E0602(undefined-variable), Viewer.PopupConnectionMenu] Undefined variable 'variable_type'
editors/Viewer.py:1649: [W0612(unused-variable), Viewer.PopupConnectionMenu] Unused variable 'connection_type'
************* Module connectors.PYRO.PSK_Adapter

Sun, 07 Apr 2019 16:23:49 +0200Merged
Edouard Tisserant <edouard.tisserant@gmail.com> [Sun, 07 Apr 2019 16:23:49 +0200] rev 2578
Merged

Wed, 03 Apr 2019 06:31:34 +0000Fix typo in README.md
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 03 Apr 2019 06:31:34 +0000] rev 2577
Fix typo in README.md

Closes #80

Thu, 04 Apr 2019 14:00:17 +0200merged rename_on_location_change branch
Edouard Tisserant [Thu, 04 Apr 2019 14:00:17 +0200] rev 2576
merged rename_on_location_change branch

Thu, 04 Apr 2019 13:59:22 +0200Rename checkbox and immediately apply. rename_on_location_change
Edouard Tisserant [Thu, 04 Apr 2019 13:59:22 +0200] rev 2575
Rename checkbox and immediately apply.
Added a checkbox in Location selection dialog (saved as user settings) to let user choose if variable is being renamed.
Also forced closing celle editor once new location is selected.

Wed, 03 Apr 2019 13:20:28 +0200LocationCellEditor use better source for variable name replacement, and validate variable name before applying it or complains otherwise. rename_on_location_change
Edouard Tisserant [Wed, 03 Apr 2019 13:20:28 +0200] rev 2574
LocationCellEditor use better source for variable name replacement, and validate variable name before applying it or complains otherwise.

Tue, 02 Apr 2019 09:46:58 +0200LocationCellEditor now systematically change variable name according to name given by CTN, calls VariablePanel' OnVariableNameChange to update POU accordingly. rename_on_location_change
Edouard Tisserant [Tue, 02 Apr 2019 09:46:58 +0200] rev 2573
LocationCellEditor now systematically change variable name according to name given by CTN, calls VariablePanel' OnVariableNameChange to update POU accordingly.

Thu, 28 Mar 2019 14:06:53 +0100Fix problem introduced in 9c5f835b031e : Exception in LDPowerRailDialog.py because of change in OnPaint/RefreshView/DrawPreview.
Edouard Tisserant [Thu, 28 Mar 2019 14:06:53 +0100] rev 2572
Fix problem introduced in 9c5f835b031e : Exception in LDPowerRailDialog.py because of change in OnPaint/RefreshView/DrawPreview.

Thu, 28 Mar 2019 13:39:58 +0100Fixed RecentProjectMenu in BeremizIDE.py broken by untested changes in wx.NewID_abuse_fix.
Edouard Tisserant [Thu, 28 Mar 2019 13:39:58 +0100] rev 2571
Fixed RecentProjectMenu in BeremizIDE.py broken by untested changes in wx.NewID_abuse_fix.

Thu, 28 Mar 2019 13:10:26 +0100Merged wx.NewID_abuse_fix branch
Edouard Tisserant [Thu, 28 Mar 2019 13:10:26 +0100] rev 2570
Merged wx.NewID_abuse_fix branch

Thu, 28 Mar 2019 13:08:20 +0100More wx.NewID abuse removal. This time BeremizIDE.py was cleaned. wx.NewID_abuse_fix
Edouard Tisserant [Thu, 28 Mar 2019 13:08:20 +0100] rev 2569
More wx.NewID abuse removal. This time BeremizIDE.py was cleaned.

Thu, 28 Mar 2019 09:19:30 +0100Merged more of wx.NewID_abuse_fix branch
Edouard Tisserant [Thu, 28 Mar 2019 09:19:30 +0100] rev 2568
Merged more of wx.NewID_abuse_fix branch

Wed, 27 Mar 2019 14:10:39 +0100More wx.NewID abuse removal. All Viewer.py got cured. wx.NewID_abuse_fix
Edouard Tisserant [Wed, 27 Mar 2019 14:10:39 +0100] rev 2567
More wx.NewID abuse removal. All Viewer.py got cured.

Wed, 27 Mar 2019 13:08:51 +0100More wx.NewID abuse removal. This one was apparently silently unbinding toolbar butons when running out of mew wx IDs. wx.NewID_abuse_fix
Edouard Tisserant [Wed, 27 Mar 2019 13:08:51 +0100] rev 2566
More wx.NewID abuse removal. This one was apparently silently unbinding toolbar butons when running out of mew wx IDs.

Tue, 26 Mar 2019 13:54:36 +0100Dyslectic typos
Edouard Tisserant [Tue, 26 Mar 2019 13:54:36 +0100] rev 2565
Dyslectic typos

Mon, 07 Jan 2019 20:32:40 +0000Close branch py3-fix. py3-fix
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 07 Jan 2019 20:32:40 +0000] rev 2564
Close branch py3-fix.

Thu, 27 Jul 2017 20:34:38 +0000Close branch 1.1 Korean release. 1.1 Korean release
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 27 Jul 2017 20:34:38 +0000] rev 2563
Close branch 1.1 Korean release.

Mon, 18 Mar 2019 09:12:44 +0000Close branch generate-button. generate-button
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 18 Mar 2019 09:12:44 +0000] rev 2562
Close branch generate-button.

Mon, 07 Jan 2019 23:55:05 +0300close #2486 head #2486
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 07 Jan 2019 23:55:05 +0300] rev 2561
close #2486 head

Mon, 07 Jan 2019 20:33:11 +0000Close branch nevow_service_rework. nevow_service_rework
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 07 Jan 2019 20:33:11 +0000] rev 2560
Close branch nevow_service_rework.

Mon, 07 Jan 2019 20:32:32 +0000Close branch wx3-fix. wx3-fix
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 07 Jan 2019 20:32:32 +0000] rev 2559
Close branch wx3-fix.

Tue, 26 Mar 2019 11:08:32 +0100Intermediate merge of wx.NewID_abuse_fix branch but kept debug code in the branch. This is still work in progress, banch is NOT closed.
Edouard Tisserant [Tue, 26 Mar 2019 11:08:32 +0100] rev 2558
Intermediate merge of wx.NewID_abuse_fix branch but kept debug code in the branch. This is still work in progress, banch is NOT closed.

Tue, 26 Mar 2019 11:03:57 +0100Continued wx.NewID abuse removal in Viewer.py : Added AppendItem to use instead of AppendMenu, made examples with AddBlockPinMenuItems and AddAlignmentMenuItems wx.NewID_abuse_fix
Edouard Tisserant [Tue, 26 Mar 2019 11:03:57 +0100] rev 2557
Continued wx.NewID abuse removal in Viewer.py : Added AppendItem to use instead of AppendMenu, made examples with AddBlockPinMenuItems and AddAlignmentMenuItems

Tue, 26 Mar 2019 09:43:51 +0100Continued wx.NewID abuse removal in Viewer.py : get rid of one call to AppendMenu method, having no real purpose apparently. To be continued. wx.NewID_abuse_fix
Edouard Tisserant [Tue, 26 Mar 2019 09:43:51 +0100] rev 2556
Continued wx.NewID abuse removal in Viewer.py : get rid of one call to AppendMenu method, having no real purpose apparently. To be continued.

Tue, 26 Mar 2019 09:41:09 +0100Start fixing wx.NewId abuse in viewer.py. This shows how to avoid using AppendMenu() function, definitely useless. wx.NewID_abuse_fix
Edouard Tisserant [Tue, 26 Mar 2019 09:41:09 +0100] rev 2555
Start fixing wx.NewId abuse in viewer.py. This shows how to avoid using AppendMenu() function, definitely useless.

Mon, 25 Mar 2019 14:59:54 +0100VariablePanel's menu do not waste Wx IDs anymore (directly binds wx objects rather than crating new ID wit wx.NewId) wx.NewID_abuse_fix
Edouard Tisserant [Mon, 25 Mar 2019 14:59:54 +0100] rev 2554
VariablePanel's menu do not waste Wx IDs anymore (directly binds wx objects rather than crating new ID wit wx.NewId)

Tue, 26 Mar 2019 09:48:45 +0100Instrument IDE code to find code abusing wx.NewId. wx.NewID_abuse_fix
Edouard Tisserant [Tue, 26 Mar 2019 09:48:45 +0100] rev 2553
Instrument IDE code to find code abusing wx.NewId.

Fri, 22 Mar 2019 14:00:35 +0100Fix error when searching accross project. Collection of result wasn't initialized and was failing in case some CTN was returning no result.
Edouard Tisserant [Fri, 22 Mar 2019 14:00:35 +0100] rev 2552
Fix error when searching accross project. Collection of result wasn't initialized and was failing in case some CTN was returning no result.

Fri, 22 Mar 2019 13:45:19 +0100Make spaghetti-code-quality great again.
Edouard Tisserant [Fri, 22 Mar 2019 13:45:19 +0100] rev 2551
Make spaghetti-code-quality great again.

Fri, 22 Mar 2019 13:26:31 +0100Merged
Edouard Tisserant [Fri, 22 Mar 2019 13:26:31 +0100] rev 2550
Merged

Mon, 18 Mar 2019 12:20:46 +0300Add Docker files to build containers to run automated tests
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 18 Mar 2019 12:20:46 +0300] rev 2549
Add Docker files to build containers to run automated tests

Mon, 18 Mar 2019 12:10:36 +0300merge
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 18 Mar 2019 12:10:36 +0300] rev 2548
merge

Mon, 18 Mar 2019 12:09:41 +0300check_source.sh: fix sed error: -e expression #1, char 25: Invalid range end
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 18 Mar 2019 12:09:41 +0300] rev 2547
check_source.sh: fix sed error: -e expression #1, char 25: Invalid range end

Warning happen only if old sed (4.4) is used.

Mon, 18 Mar 2019 12:07:49 +0300Fix pylint warning [C0325(superfluous-parens), ] Unnecessary parens after u'if' keyword
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 18 Mar 2019 12:07:49 +0300] rev 2546
Fix pylint warning [C0325(superfluous-parens), ] Unnecessary parens after u'if' keyword

************* Module runtime.PLCObject
runtime/PLCObject.py:609: [C0325(superfluous-parens), ] Unnecessary parens after u'if' keyword

Wed, 13 Mar 2019 15:58:34 +0300Update Beremiz dependencies because of added PYROS:// support
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 13 Mar 2019 15:58:34 +0300] rev 2545
Update Beremiz dependencies because of added PYROS:// support

Wed, 13 Mar 2019 15:54:17 +0300Fix header and convert comments to docstrings in PSK_Adapter
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 13 Mar 2019 15:54:17 +0300] rev 2544
Fix header and convert comments to docstrings in PSK_Adapter

Wed, 13 Mar 2019 15:43:45 +0300Fix Pyro work with SSL wrapper (sslpsk)
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 13 Mar 2019 15:43:45 +0300] rev 2543
Fix Pyro work with SSL wrapper (sslpsk)

Following error was shown in Beremiz console:
PYRO connecting to URI : PYROS://127.0.0.1:3001#beremiz
Exception while connecting to 'PYROS://127.0.0.1:3001#beremiz': non-zero flags not allowed in calls to recv() on <class 'ssl.SSLSocket'>
Connection failed to PYROS://127.0.0.1:3001#beremiz!

Reason is that Pyro calls socket recv() with MSGWAITALL flag, that causes ValueError exception.

https://docs.python.org/2/library/ssl.html
recv(), recv_into() (but passing a non-zero flags argument is not allowed)

Wed, 13 Mar 2019 14:27:24 +0300Fix crash in runtime if PSK secret is missing
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 13 Mar 2019 14:27:24 +0300] rev 2542
Fix crash in runtime if PSK secret is missing

./Beremiz_service.py -s $PWD/psk2.txt -n beremiz /tmp/beremiz
Beremiz_service: 1.2-1378c18402c3+

Traceback (most recent call last):
File "./Beremiz_service.py", line 511, in <module>
ensurePSK(servicename, PSKpath)
File "/home/developer/WorkData/PLC/beremiz/beremiz/runtime/Stunnel.py", line 32, in ensurePSK
PSKgen(ID, PSKpath)
File "/home/developer/WorkData/PLC/beremiz/beremiz/runtime/Stunnel.py", line 23, in PSKgen
call(restart_stunnel_cmdline)
File "/home/developer/WorkData/PLC/beremiz/beremiz/runtime/spawn_subprocess.py", line 116, in call
pid = posix_spawn.posix_spawnp(cmd[0], cmd)
File "/home/developer/.local/lib/python2.7/site-packages/posix_spawn/_impl.py", line 120, in posix_spawnp
return _posix_spawn(lib.posix_spawnp, *args, **kwargs)
File "/home/developer/.local/lib/python2.7/site-packages/posix_spawn/_impl.py", line 111, in _posix_spawn
_check_error(res, path)
File "/home/developer/.local/lib/python2.7/site-packages/posix_spawn/_impl.py", line 10, in _check_error
raise OSError(errno, os.strerror(errno), path)
OSError: [Errno 2] No such file or directory: '/etc/init.d/S50stunnel'

Wed, 13 Mar 2019 14:14:31 +0300Update build instruction for BACNet in README
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 13 Mar 2019 14:14:31 +0300] rev 2541
Update build instruction for BACNet in README

in r3189 Steve added new feature to bacnet-stack: network port - to
access configuration and properties of network ports of a device.
https://sourceforge.net/p/bacnet/code/3189/

It's not implemented by Beremiz.

Wed, 13 Mar 2019 14:11:13 +0300Replace md5 module with hashlib
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 13 Mar 2019 14:11:13 +0300] rev 2540
Replace md5 module with hashlib

fix following pylint error:

************* Module connectors.ConnectorBase
connectors/ConnectorBase.py:7: [W1648(bad-python3-import), ] Module moved in Python 3
************* Module runtime.PLCObject
runtime/PLCObject.py:33: [W1648(bad-python3-import), ] Module moved in Python 3

Wed, 13 Mar 2019 11:51:40 +0300Remove execute attributes from runtime/PLCObject.py
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 13 Mar 2019 11:51:40 +0300] rev 2539
Remove execute attributes from runtime/PLCObject.py

Wed, 13 Mar 2019 11:49:46 +0300Fix typo
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 13 Mar 2019 11:49:46 +0300] rev 2538
Fix typo

Wed, 13 Mar 2019 11:47:03 +0300Fix various pylint and pep8 errors
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 13 Mar 2019 11:47:03 +0300] rev 2537
Fix various pylint and pep8 errors

Check basic code-style problems for PEP-8
pep8 version: 2.4.0
./connectors/PYRO/__init__.py:57:43: E261 at least two spaces before inline comment
./connectors/SchemeEditor.py:29:21: E128 continuation line under-indented for visual indent
./controls/IDBrowser.py:101:23: E127 continuation line over-indented for visual indent
./controls/IDBrowser.py:102:23: E127 continuation line over-indented for visual indent

Check for problems using pylint ...
No config file found, using default configuration
pylint 1.9.4,
astroid 1.6.5
Python 2.7.16rc1 (default, Feb 18 2019, 11:05:09)
[GCC 8.2.0]
Use multiple threads for pylint
Using config file /home/developer/WorkData/PLC/beremiz/beremiz/.pylint
************* Module connectors.PYRO_dialog
connectors/PYRO_dialog.py:9: [W0611(unused-import), ] Unused import wx
************* Module connectors
connectors/__init__.py:32: [W1652(deprecated-types-field), ] Accessing a deprecated fields on the types module
connectors/__init__.py:32: [C0411(wrong-import-order), ] standard import "from types import ClassType" should be placed before "from connectors.ConnectorBase import ConnectorBase"
************* Module connectors.PYRO.PSK_Adapter
connectors/PYRO/PSK_Adapter.py:7: [C0411(wrong-import-order), ] standard import "import ssl" should be placed before "import sslpsk"
************* Module connectors.SchemeEditor
connectors/SchemeEditor.py:29: [C0330(bad-continuation), ] Wrong continued indentation (add 1 space).
wx.ALIGN_CENTER_VERTICAL),
^|
connectors/SchemeEditor.py:42: [W0631(undefined-loop-variable), SchemeEditor.__init__] Using possibly undefined loop variable 'tag'
************* Module runtime.WampClient
runtime/WampClient.py:138: [W1612(unicode-builtin), WampSession.onJoin] unicode built-in referenced
runtime/WampClient.py:154: [W1612(unicode-builtin), WampSession.publishWithOwnID] unicode built-in referenced
runtime/WampClient.py:346: [W1612(unicode-builtin), PublishEvent] unicode built-in referenced
runtime/WampClient.py:351: [W1612(unicode-builtin), PublishEventWithOwnID] unicode built-in referenced
runtime/WampClient.py:31: [W0611(unused-import), ] Unused str imported from builtins as text
************* Module runtime.PLCObject
runtime/PLCObject.py:35: [W1648(bad-python3-import), ] Module moved in Python 3
runtime/PLCObject.py:35: [C0411(wrong-import-order), ] standard import "import md5" should be placed before "from six.moves import xrange"
runtime/PLCObject.py:36: [C0411(wrong-import-order), ] standard import "from tempfile import mkstemp" should be placed before "from six.moves import xrange"
runtime/PLCObject.py:37: [C0411(wrong-import-order), ] standard import "import shutil" should be placed before "from six.moves import xrange"
runtime/PLCObject.py:38: [C0411(wrong-import-order), ] standard import "from functools import wraps, partial" should be placed before "from six.moves import xrange"
************* Module runtime.Worker
runtime/Worker.py:12: [W1648(bad-python3-import), ] Module moved in Python 3
************* Module runtime.spawn_subprocess
runtime/spawn_subprocess.py:125: [C0325(superfluous-parens), ] Unnecessary parens after 'print' keyword
runtime/spawn_subprocess.py:130: [C0325(superfluous-parens), ] Unnecessary parens after 'print' keyword
runtime/spawn_subprocess.py:125: [E1601(print-statement), ] print statement used
runtime/spawn_subprocess.py:130: [E1601(print-statement), ] print statement used
************* Module controls.IDBrowser
controls/IDBrowser.py:101: [C0330(bad-continuation), ] Wrong continued indentation (remove 5 spaces).
if self.isManager
| ^
controls/IDBrowser.py:102: [C0330(bad-continuation), ] Wrong continued indentation (remove 5 spaces).
else dv.DATAVIEW_CELL_INERT),
| ^
************* Module Beremiz_service
Beremiz_service.py:34: [W0611(unused-import), ] Unused import __builtin__

Wed, 13 Mar 2019 10:19:30 +0300Fix invalid python3 syntax
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 13 Mar 2019 10:19:30 +0300] rev 2536
Fix invalid python3 syntax

Syntax checking using python3 ...
Python 3.7.2+
File "./connectors/PYRO/__init__.py", line 76
except Exception, e:
^
SyntaxError: invalid syntax

Syntax error in ./connectors/PYRO/__init__.py
File "./connectors/PYRO/PSK_Adapter.py", line 40
except ProtocolError, x:
^
SyntaxError: invalid syntax

Syntax error in ./s.py
File "./runtime/Worker.py", line 67
raise _job.exc_info[0], _job.exc_info[1], _job.exc_info[2]
^
SyntaxError: invalid syntax

Wed, 13 Mar 2019 10:02:11 +0300Exclude pyjslib.py from python3 syntax correction check
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 13 Mar 2019 10:02:11 +0300] rev 2535
Exclude pyjslib.py from python3 syntax correction check

pyjs doesn't support python3 and it's unmaintained.
async is a new keyword introduced in python 3.7.

./tests/tools/check_source.sh
Syntax checking using python3 ...
Python 3.7.2+

Syntax error in ./runtime/Worker.py
File "./svgui/pyjs/lib/pyjslib.py", line 24
def import_module(path, parent_module, module_name, dynamic=1, async=False):
^
SyntaxError: invalid syntax

Wed, 13 Mar 2019 09:56:37 +0300revert occasionally committed changed first_steps project.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 13 Mar 2019 09:56:37 +0300] rev 2534
revert occasionally committed changed first_steps project.

project was changed by commit:
update translations from https://www.transifex.com/beremiz/beremiz-ide (756d02cf78db)

Mon, 18 Mar 2019 07:13:04 +0000Merged in masterschlumpf/beremiz/generate-button (pull request #38)
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 18 Mar 2019 07:13:04 +0000] rev 2533
Merged in masterschlumpf/beremiz/generate-button (pull request #38)

"Generate Prgram" button

Approved-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>

Fri, 15 Mar 2019 18:27:43 +0100Create a "Generate Program As..." menu to make the "Generate Program" toolbutton even more useful. generate-button
Schlumpf <schlumpf@kr-ll.de> [Fri, 15 Mar 2019 18:27:43 +0100] rev 2532
Create a "Generate Program As..." menu to make the "Generate Program" toolbutton even more useful.

The behaviour is the same as "Save" and "Save As...". Now "Generate Program" uses the last filename
if known and "Generate Progam As..." asks every time.

Fri, 15 Mar 2019 17:34:24 +0100Add "Generate Program" to toolbar in PLCOpenEditor standalone mode. generate-button
Schlumpf <schlumpf@kr-ll.de> [Fri, 15 Mar 2019 17:34:24 +0100] rev 2531
Add "Generate Program" to toolbar in PLCOpenEditor standalone mode.

Currently you can find the "Generate Program" action only in the file menu,
but this action is very often used in standalone mode, so I added toolbuffon.

Fri, 22 Mar 2019 11:10:37 +0100Merged search in CTN branch
Edouard Tisserant [Fri, 22 Mar 2019 11:10:37 +0100] rev 2530
Merged search in CTN branch

Fri, 22 Mar 2019 11:09:41 +0100Finished adding search in python and C files. Stripped debug code and useless comments. Close branch search_in_CTN
Edouard Tisserant [Fri, 22 Mar 2019 11:09:41 +0100] rev 2529
Finished adding search in python and C files. Stripped debug code and useless comments. Close branch

Fri, 22 Mar 2019 10:57:04 +0100WIP adding searching capabilities in python files. was done : search_in_CTN
Edouard Tisserant [Fri, 22 Mar 2019 10:57:04 +0100] rev 2528
WIP adding searching capabilities in python files. was done :
- added search in body of Code File Tree Nodes (moved editor code so that we CTN search can have the same sections text layout as editor to search in)

Thu, 21 Mar 2019 14:00:26 +0100WIP adding searching capabilities in python files. was done : search_in_CTN
Edouard Tisserant [Thu, 21 Mar 2019 14:00:26 +0100] rev 2527
WIP adding searching capabilities in python files. was done :
- added search in global variables used by Code File Tree Nodes

Thu, 21 Mar 2019 13:10:49 +0100WIP adding searching capabilities in python files. was done : search_in_CTN
Edouard Tisserant [Thu, 21 Mar 2019 13:10:49 +0100] rev 2526
WIP adding searching capabilities in python files. was done :
- fixed highlighting search result in text body of CTN code editor.

Thu, 21 Mar 2019 13:04:26 +0100WIP adding searching capabilities in python files. was done : search_in_CTN
Edouard Tisserant [Thu, 21 Mar 2019 13:04:26 +0100] rev 2525
WIP adding searching capabilities in python files. was done :
- change stub search results to trigger highlighting un variable panel
- trying to highlight in CTN code file editors -> problem with EditorPanel not having self.VariableEditor set...
- added highlight capability to CTN's CodeFileEditor's VariablePanel

Wed, 20 Mar 2019 11:34:41 +0100WIP adding searching capabilities in python files. was done : search_in_CTN
Edouard Tisserant [Wed, 20 Mar 2019 11:34:41 +0100] rev 2524
WIP adding searching capabilities in python files. was done :
- fixed stub CTN search results so that they can be accepted by search result panel
- worked on search result panel so that it can display those CTN results
- made search result panel display correctly stub search result, for variables and body matches
- EditProjectElement now opens CTN node as well as PlcOpen project nodes

Fri, 15 Mar 2019 14:11:49 +0100WIP adding searching capabilities in python files: search_in_CTN
Edouard Tisserant [Fri, 15 Mar 2019 14:11:49 +0100] rev 2523
WIP adding searching capabilities in python files:
- Added recursive Search capability to config tree nodes
- Added stub search to code editors, for test

Mon, 11 Mar 2019 17:20:15 +0100Fixed more pylint reports :
Edouard Tisserant <edouard.tisserant@gmail.com> [Mon, 11 Mar 2019 17:20:15 +0100] rev 2522
Fixed more pylint reports :
connectors/__init__.py:31: [W1652(deprecated-types-field), ] Accessing a deprecated fields on the types module
in fact, it should have been unused import.

Mon, 11 Mar 2019 13:51:07 +0100Long due merge
Edouard Tisserant [Mon, 11 Mar 2019 13:51:07 +0100] rev 2521
Long due merge

Tue, 05 Mar 2019 11:43:20 +0300Fix backtrace on printing localized (non-ascii) error message in PLCGenerator.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 05 Mar 2019 11:43:20 +0300] rev 2520
Fix backtrace on printing localized (non-ascii) error message in PLCGenerator.

traceback:
File "C:\Beremiz\targets\st\beremiz\..\..\..\beremiz\beremiz\BeremizIDE.py", line 811, in OnMenu
getattr(self.CTR, method)()
File "C:\Beremiz\targets\st\beremiz\..\..\..\beremiz\beremiz\ProjectController.py", line 1134, in _Build
IECGenRes = self._Generate_SoftPLC()
File "C:\Beremiz\targets\st\beremiz\..\..\..\beremiz\beremiz\ProjectController.py", line 746, in _Generate_SoftPLC
if self._Generate_PLC_ST():
File "C:\Beremiz\targets\st\beremiz\..\..\..\beremiz\beremiz\ProjectController.py", line 763, in _Generate_PLC_ST
self._getIECgeneratedcodepath())
File "C:\Beremiz\targets\st\beremiz\..\..\..\beremiz\beremiz\PLCControler.py", line 466, in GenerateProgram
errors.append(str(ex))
<type 'exceptions.UnicodeEncodeError'>: 'ascii' codec can't encode characters in position 0-9: ordinal not in range(128)
Fix backtrace on printing localized (non-ascii) error message in PLCGenerator.

traceback:
File "C:\Beremiz\targets\st\beremiz\..\..\..\beremiz\beremiz\BeremizIDE.py", line 811, in OnMenu
getattr(self.CTR, method)()
File "C:\Beremiz\targets\st\beremiz\..\..\..\beremiz\beremiz\ProjectController.py", line 1134, in _Build
IECGenRes = self._Generate_SoftPLC()
File "C:\Beremiz\targets\st\beremiz\..\..\..\beremiz\beremiz\ProjectController.py", line 746, in _Generate_SoftPLC
if self._Generate_PLC_ST():
File "C:\Beremiz\targets\st\beremiz\..\..\..\beremiz\beremiz\ProjectController.py", line 763, in _Generate_PLC_ST
self._getIECgeneratedcodepath())
File "C:\Beremiz\targets\st\beremiz\..\..\..\beremiz\beremiz\PLCControler.py", line 466, in GenerateProgram
errors.append(str(ex))
<type 'exceptions.UnicodeEncodeError'>: 'ascii' codec can't encode characters in position 0-9: ordinal not in range(128)


Close #67

Tue, 05 Mar 2019 11:19:36 +0300Fix crash if LD input contact isn't connected
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 05 Mar 2019 11:19:36 +0300] rev 2519
Fix crash if LD input contact isn't connected

Traceback (most recent call last):
File "/home/developer/WorkData/PLC/beremiz/beremiz/BeremizIDE.py", line 339, in OnMethod
obj.CTR.CallMethod('_'+meth)
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 1996, in CallMethod
getattr(self, method)()
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 1134, in _Build
IECGenRes = self._Generate_SoftPLC()
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 746, in _Generate_SoftPLC
if self._Generate_PLC_ST():
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 763, in _Generate_PLC_ST
self._getIECgeneratedcodepath())
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCControler.py", line 456, in GenerateProgram
self.ProgramChunks = GenerateCurrentProgram(self, self.Project, errors, warnings)
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 1762, in GenerateCurrentProgram
generator.GenerateProgram()
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 478, in GenerateProgram
self.GeneratePouProgram(pou_name)
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 260, in GeneratePouProgram
program = pou_program.GenerateProgram(pou)
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 1718, in GenerateProgram
self.ComputeProgram(pou)
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 1028, in ComputeProgram
self.GenerateBlock(instance, block_infos, body, None)
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 1144, in GenerateBlock
expression = self.ComputeExpression(body, connections, executionOrderId > 0)
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 1373, in ComputeExpression
paths = self.GeneratePaths(connections, body, order, to_inout)
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 1344, in GeneratePaths
elif isinstance(result[0], list):
IndexError: list index out of range


Close #70

Fri, 01 Mar 2019 16:55:16 +0300Fix section styling in code editor (python and c extensions) if non-latin symbols are used in the code
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 01 Mar 2019 16:55:16 +0300] rev 2518
Fix section styling in code editor (python and c extensions) if non-latin symbols are used in the code

Problem exists even if non-latin characters are placed in comments.
Close #76

Thu, 21 Feb 2019 11:39:50 +0300update localization template
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 21 Feb 2019 11:39:50 +0300] rev 2517
update localization template

Thu, 21 Feb 2019 11:27:16 +0300merge
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 21 Feb 2019 11:27:16 +0300] rev 2516
merge

Thu, 21 Feb 2019 11:25:58 +0300updated list of translators
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 21 Feb 2019 11:25:58 +0300] rev 2515
updated list of translators

Thu, 21 Feb 2019 11:25:03 +0300update translations from https://www.transifex.com/beremiz/beremiz-ide
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 21 Feb 2019 11:25:03 +0300] rev 2514
update translations from https://www.transifex.com/beremiz/beremiz-ide

added Basque (eu) and Vietnamese (Viet Nam) (vi_VN) translations

Thu, 21 Feb 2019 10:58:37 +0300Add SpinButtons for integer and floating point variables in ForceVariableDialog
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 21 Feb 2019 10:58:37 +0300] rev 2513
Add SpinButtons for integer and floating point variables in ForceVariableDialog

it allows to change variable value using only mouse.

Thu, 21 Feb 2019 10:17:38 +0300Fix non-marking as manually forced floating point variable if the value isn't integer
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 21 Feb 2019 10:17:38 +0300] rev 2512
Fix non-marking as manually forced floating point variable if the value isn't integer

For example, if user in debug variable panel set any floating point
variable to 34.3, then it's not shown as forced (blue color) and user
can't release this enforcement.

If user changes the value to 34.0, then enforcement shows
correctly. This is done because binary representation of floating point
numbers in IDE and runtime can be slightly different (double vs float)
and as a result values aren't equal.

Thu, 14 Feb 2019 10:27:24 +0300Don't close ForceVariableDialog if user entered wrong new value
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 14 Feb 2019 10:27:24 +0300] rev 2511
Don't close ForceVariableDialog if user entered wrong new value

return back to edit field in this case

Thu, 14 Feb 2019 10:19:30 +0300Additional fix for rewrite ForceVariableDialog commit (9076249f)
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 14 Feb 2019 10:19:30 +0300] rev 2510
Additional fix for rewrite ForceVariableDialog commit (9076249f)

fix following backtrace:

Traceback (most recent call last):
File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk3/wx/_core.py", line 16765, in <lambda>
lambda event: event.callable(*event.args, **event.kw) )
File "/home/developer/WorkData/PLC/beremiz/beremiz/controls/DebugVariablePanel/DebugVariableViewer.py", line 232, in HandleButton
button.ProcessCallback()
File "/home/developer/WorkData/PLC/beremiz/beremiz/controls/DebugVariablePanel/GraphButton.py", line 156, in ProcessCallback
self.Callback()
File "/home/developer/WorkData/PLC/beremiz/beremiz/controls/DebugVariablePanel/DebugVariableViewer.py", line 350, in OnForceButton
self.ForceValue(self.ItemsDict.values()[0])
File "/home/developer/WorkData/PLC/beremiz/beremiz/controls/DebugVariablePanel/DebugVariableViewer.py", line 428, in ForceValue
dialog.GetValue())
File "/home/developer/WorkData/PLC/beremiz/beremiz/dialogs/ForceVariableDialog.py", line 232, in GetValue
return GetTypeValue[self.IEC_Type](wx.TextEntryDialog.GetValue(self))
TypeError: unbound method GetValue() must be called with TextEntryDialog instance as first argument (got ForceVariableDialog instance instead)

Thu, 14 Feb 2019 10:02:58 +0300Fix redraw problems in preview frames and debug panel
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 14 Feb 2019 10:02:58 +0300] rev 2509
Fix redraw problems in preview frames and debug panel

The problem was that direct call of RefreshView (now DrawView) doesn't
generate EVT_PAINT (at least on GNU/Linux with Wayland and wxgtk build
with gtk3+ support).
Now RefreshView simply triggers EVT_PAINT and EVT_PAINT handler does actual work.

Thu, 14 Feb 2019 09:44:19 +0300Rewrite ForceVariableDialog. It's not based on wx.TextEntryDialog
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 14 Feb 2019 09:44:19 +0300] rev 2508
Rewrite ForceVariableDialog. It's not based on wx.TextEntryDialog

Don't customize standard wx.TextEntryDialog on the fly, implement your
own dialog for that with expected behavior and without any hacks.

Wed, 13 Feb 2019 13:35:48 +0000merge updates to modbus/mb_runtime.c
Mario de Sousa <msousa@fe.up.pt> [Wed, 13 Feb 2019 13:35:48 +0000] rev 2507
merge updates to modbus/mb_runtime.c

Mon, 14 Jan 2019 12:30:32 +0300fix 'SaveAs' in case of overwriting existing project
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 14 Jan 2019 12:30:32 +0300] rev 2506
fix 'SaveAs' in case of overwriting existing project

Traceback (most recent call last):
File "/home/developer/WorkData/PLC/beremiz/beremiz/BeremizIDE.py", line 959, in OnSaveProjectAsMenu
self.CTR.SaveProjectAs()
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 600, in SaveProjectAs
self.SaveProject(old_project_path)
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 579, in SaveProject
self._getProjectFilesPath(self.ProjectPath))
File "/usr/lib/python2.7/shutil.py", line 200, in copytree
os.makedirs(dst)
File "/usr/lib/python2.7/os.py", line 157, in makedirs
mkdir(name, mode)
OSError: [Errno 17] File exists: '/tmp/tests/project_files'

Mon, 14 Jan 2019 12:17:48 +0300fix 'SaveAs' to non-empty directory and directory without write permissions
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 14 Jan 2019 12:17:48 +0300] rev 2505
fix 'SaveAs' to non-empty directory and directory without write permissions

Sat, 12 Jan 2019 15:02:17 +0300fix problems with recursive beremiz.h inclusion
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 12 Jan 2019 15:02:17 +0300] rev 2504
fix problems with recursive beremiz.h inclusion

Sat, 12 Jan 2019 13:57:16 +0300remove LogMessage prototype from plc_main_head.c
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 12 Jan 2019 13:57:16 +0300] rev 2503
remove LogMessage prototype from plc_main_head.c

it's not needed, because prototype is included in beremiz.h
But it caused problems with TARGET_LOGGING_DISABLE.

Mon, 07 Jan 2019 23:28:28 +0300merge
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 07 Jan 2019 23:28:28 +0300] rev 2502
merge

Sun, 06 Jan 2019 03:11:39 +0300Make online debug optional
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sun, 06 Jan 2019 03:11:39 +0300] rev 2501
Make online debug optional

It could be useful for very small targets like Atmega (Arduino) and
for target bring-up there developer want to have running PLC program,
but has not implemented runtime communication yet.


TARGET_DEBUG_AND_RETAIN_DISABLE - completely disable debug and retain
functionality. Previously named TARGET_DEBUG_DISABLE.

TARGET_ONLINE_DEBUG_DISABLE - can be used to enable retain
functionality (no define TARGET_DEBUG_AND_RETAIN_DISABLE is used), but disable
online debug with corresponding RAM/FLASH overhead.

TARGET_LOGGING_DISABLE - disables logging functionality from runtime and PLC program

TARGET_EXT_SYNC_DISABLE - disables PLC program synchronization with
external events. For example, it could be used to synchronize several
PLCs that control motors for different axes.

By default all these options are off.

To test generate program for Generic target, put following files in
project files directory and run build.sh after generating PLC program.
This is very easy to integrate into makefile (Generic target).

[------------- build.sh --------------------------]
files=$(find $PWD/../build -iname '*.c' | grep -v POUS.c)
arm-none-eabi-gcc \
-DTARGET_DEBUG_AND_RETAIN_DISABLE \
-DTARGET_ONLINE_DEBUG_DISABLE \
-DTARGET_LOGGING_DISABLE \
-DTARGET_EXT_SYNC_DISABLE \
-flto -ffunction-sections -fdata-sections -I../../../../matiec/lib/C \
$files \
main.c \
-Wl,--Map=./program.map,--cref \
-nodefaultlibs --specs=nano.specs -Wl,--static -Wl,--gc-section -Wl,--start-group -lc -lm -lnosys -lgcc -Wl,--end-group
[------------------------------------------------]

[------------- main.c --------------------------]
#ifndef TARGET_DEBUG_AND_RETAIN_DISABLE
void Retain(void){}
void InValidateRetainBuffer(void){}
void ValidateRetainBuffer(void){}
#endif

extern void __run(void);
int main(void)
{
for(;;) {
__run();
// sleep common_ticktime__ ns
// add common_ticktime__ ns to __CURRENT_TIME
}
return 0;
}
[------------------------------------------------]

Sun, 06 Jan 2019 02:00:07 +0300Disable Python extension in First steps example
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sun, 06 Jan 2019 02:00:07 +0300] rev 2500
Disable Python extension in First steps example

Sun, 06 Jan 2019 01:22:46 +0300use pregenerated CRC32 lookup tables for retain on Win32 and GNU/Linux
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sun, 06 Jan 2019 01:22:46 +0300] rev 2499
use pregenerated CRC32 lookup tables for retain on Win32 and GNU/Linux

This code could be possible reused on low-end targets with limited RAM.

code to generate lookup table:
[---------------------------------------------------------------------]

/* CRC lookup table and initial state. */
uint32_t crc32_table[256];

/* Generate CRC32 lookup table. */
void GenerateCRC32Table(void)
{
unsigned int i, j;
/* Use CRC-32-IEEE 802.3 polynomial 0x04C11DB7 (bit reflected). */
uint32_t poly = 0xEDB88320;

for (i = 0; i <= 0xFF; i++)
{
uint32_t c = i;
for (j = 0 ; j < 8 ; j++)
c = (c & 1) ? (c >> 1 ) ^ poly : (c >> 1);
crc32_table[i] = c;
}
}

void main(void)
{
GenerateCRC32Table();
int j=0;
for(int i=0; i<256; i++) {
printf("0x%08X, ", crc32_table[i]);
if (++j >= 8) {
j = 0;
printf("\n");
}
}
}
[---------------------------------------------------------------------]

Mon, 07 Jan 2019 20:24:49 +0000Merged in masterschlumpf/beremiz/wx3-fix (pull request #37)
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 07 Jan 2019 20:24:49 +0000] rev 2498
Merged in masterschlumpf/beremiz/wx3-fix (pull request #37)

Fix an exception with wx-3.0-gtk3 in PLCOpenEditor when generating ST files

Approved-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>

Mon, 07 Jan 2019 18:32:03 +0100Fix an exception on wx-3.0-gtk3 in PLCOpenEditor when generating ST files. wx3-fix
Schlumpf <schlumpf@kr-ll.de> [Mon, 07 Jan 2019 18:32:03 +0100] rev 2497
Fix an exception on wx-3.0-gtk3 in PLCOpenEditor when generating ST files.

On Python2.7 with WX3.0 and GTK3, an assertionError rises on generating a ST file if the name is already set. The first generation works without problems, if you generate the file a second one, PLCOpenEditor tries to open the file
save dialog with the pre entered name from last run. Then the following assertion pops up:

PyAssertionError: C++ assertion "volDummy.empty() && pathDummy.empty()" failed at ./src/common/filename.cpp(568) in Assign(): the file name shouldn't contain the path

This fix reduces the filepath of the ST file the to the filename. Now it works fine.

Mon, 24 Dec 2018 16:44:06 +0300Fix typos in function names
Dmitriy Kuzmin <z644813828@gmail.com> [Mon, 24 Dec 2018 16:44:06 +0300] rev 2496
Fix typos in function names

Mon, 24 Dec 2018 16:22:28 +0300update links to matiec and beremiz repos in README
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 24 Dec 2018 16:22:28 +0300] rev 2495
update links to matiec and beremiz repos in README

Mon, 24 Dec 2018 16:20:20 +0300fix zoom-in/zoom-out using mouse wheel
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 24 Dec 2018 16:20:20 +0300] rev 2494
fix zoom-in/zoom-out using mouse wheel

regression introduced by 2393:235f847be37e "python3 support: pylint, W1619 #(old-division) division w/o __future__ statement"

Mon, 11 Mar 2019 09:18:58 +0100better pylint complain workaround
Edouard Tisserant <edouard.tisserant@gmail.com> [Mon, 11 Mar 2019 09:18:58 +0100] rev 2493
better pylint complain workaround

Mon, 11 Mar 2019 01:03:32 +0100check_sources.sh makes me become even less productive
Edouard Tisserant <edouard.tisserant@gmail.com> [Mon, 11 Mar 2019 01:03:32 +0100] rev 2492
check_sources.sh makes me become even less productive

Thu, 07 Mar 2019 21:57:18 +0100Added stub axis_s type in EtherLAB CiA402 support code, until Motion Contol Library comes back
Edouard Tisserant <edouard.tisserant@gmail.com> [Thu, 07 Mar 2019 21:57:18 +0100] rev 2491
Added stub axis_s type in EtherLAB CiA402 support code, until Motion Contol Library comes back

Tue, 19 Feb 2019 11:27:29 +0100Allow using one XSD based target description for many targets. Target description XSD can now use %(target_name)s to refer to target name.
Edouard Tisserant [Tue, 19 Feb 2019 11:27:29 +0100] rev 2490
Allow using one XSD based target description for many targets. Target description XSD can now use %(target_name)s to refer to target name.

Thu, 14 Feb 2019 10:06:43 +0100Fix previous commit : Using wx.CallAfter shouldn't have been necessary, and was a symptom of failing evaluator's deadlock detection.
Edouard Tisserant [Thu, 14 Feb 2019 10:06:43 +0100] rev 2489
Fix previous commit : Using wx.CallAfter shouldn't have been necessary, and was a symptom of failing evaluator's deadlock detection.

Wed, 13 Feb 2019 13:08:26 +0100Fix startup of wxGlade base HMI. Wx calls were issued from non-wx thread (main).
Edouard Tisserant [Wed, 13 Feb 2019 13:08:26 +0100] rev 2488
Fix startup of wxGlade base HMI. Wx calls were issued from non-wx thread (main).

Wed, 13 Feb 2019 09:41:35 +0100Reworked chunk based transfer to support duplicated files (i.e. files with same content, but different names)
Edouard Tisserant [Wed, 13 Feb 2019 09:41:35 +0100] rev 2487
Reworked chunk based transfer to support duplicated files (i.e. files with same content, but different names)

Fri, 01 Feb 2019 14:14:13 +0100Fixed deadlock in runtime's Worker. Was discovered while using WAMP and PYRO simultaneously.
Edouard Tisserant [Fri, 01 Feb 2019 14:14:13 +0100] rev 2486
Fixed deadlock in runtime's Worker. Was discovered while using WAMP and PYRO simultaneously.

Thu, 31 Jan 2019 14:10:06 +0100Add a debugger token to SetTraceVariables and GetTraceVariables to prevent crash an inconsistant data in case of multiple connections. Last connection now takes over existing connections's debug, and first connected IDE gets a wrning.
Edouard Tisserant [Thu, 31 Jan 2019 14:10:06 +0100] rev 2485
Add a debugger token to SetTraceVariables and GetTraceVariables to prevent crash an inconsistant data in case of multiple connections. Last connection now takes over existing connections's debug, and first connected IDE gets a wrning.

Tue, 29 Jan 2019 09:14:47 +0100Fixed deadlock when using Wx together with Twisted in runtime.
Edouard Tisserant [Tue, 29 Jan 2019 09:14:47 +0100] rev 2484
Fixed deadlock when using Wx together with Twisted in runtime.

Fri, 25 Jan 2019 14:06:11 +0100Split IDE's frame OnCloseFrame() into TryCloseFrame() and OnCloseFrame(), to help further customization
Edouard Tisserant [Fri, 25 Jan 2019 14:06:11 +0100] rev 2483
Split IDE's frame OnCloseFrame() into TryCloseFrame() and OnCloseFrame(), to help further customization

Wed, 09 Jan 2019 14:10:07 +0100fixed exception happening randomly just after showing discovery panel.
Edouard Tisserant [Wed, 09 Jan 2019 14:10:07 +0100] rev 2482
fixed exception happening randomly just after showing discovery panel.

Wed, 09 Jan 2019 14:09:02 +0100fixed exception happening when connecting to empty URI, and set URI through URI Editor Dialog popping up becaue empty.
Edouard Tisserant [Wed, 09 Jan 2019 14:09:02 +0100] rev 2481
fixed exception happening when connecting to empty URI, and set URI through URI Editor Dialog popping up becaue empty.

Mon, 07 Jan 2019 13:50:39 +0100Merged Mario's modbus fix : Modbus plugin: reset periodic activation timer when overrun occurs (delays due to communication errors, ...)
Edouard Tisserant [Mon, 07 Jan 2019 13:50:39 +0100] rev 2480
Merged Mario's modbus fix : Modbus plugin: reset periodic activation timer when overrun occurs (delays due to communication errors, ...)

Sat, 02 Jun 2018 11:56:01 +0100Modbus plugin: reset periodic activation timer when overrun occurs (delays due to communication errors, ...)
Mario de Sousa <msousa@fe.up.pt> [Sat, 02 Jun 2018 11:56:01 +0100] rev 2479
Modbus plugin: reset periodic activation timer when overrun occurs (delays due to communication errors, ...)

Mon, 07 Jan 2019 11:33:34 +0100Disable MDNS:// scheme support. Also prevent discovery pannel to produce some. For now it seems that that feature is unused, and could be a security issue.
Edouard Tisserant [Mon, 07 Jan 2019 11:33:34 +0100] rev 2478
Disable MDNS:// scheme support. Also prevent discovery pannel to produce some. For now it seems that that feature is unused, and could be a security issue.

Fri, 21 Dec 2018 13:51:33 +0100Added support to PYROS in Zeroconf discovery and publish. For now, PYRO://mdnsname._tcp.local. URI are broken, and discovery panel generate IP based URI by default.
Edouard Tisserant [Fri, 21 Dec 2018 13:51:33 +0100] rev 2477
Added support to PYROS in Zeroconf discovery and publish. For now, PYRO://mdnsname._tcp.local. URI are broken, and discovery panel generate IP based URI by default.

Fri, 21 Dec 2018 13:43:41 +0100PyroServer: fixed naming of class, and reorganized methods in order to ease subclassing, in case of customization of service publication on the local network (i.e. zeroconf)
Edouard Tisserant [Fri, 21 Dec 2018 13:43:41 +0100] rev 2476
PyroServer: fixed naming of class, and reorganized methods in order to ease subclassing, in case of customization of service publication on the local network (i.e. zeroconf)

Fri, 21 Dec 2018 13:39:41 +0100Fix exception dialog with non recognized URI schemes
Edouard Tisserant [Fri, 21 Dec 2018 13:39:41 +0100] rev 2475
Fix exception dialog with non recognized URI schemes

Wed, 19 Dec 2018 10:53:19 +0100Fixed runtime's reconnecting loop not stopping when re-configuring WAMP.
Edouard Tisserant [Wed, 19 Dec 2018 10:53:19 +0100] rev 2474
Fixed runtime's reconnecting loop not stopping when re-configuring WAMP.
In case WAMP was already trying to connect without success and user change WAMP configuration through web interface, previous ReconnectingClient wasn't stopped.

Wed, 19 Dec 2018 10:48:53 +0100Removed nonsense code, that I should have check more in details before merging m(
Edouard Tisserant [Wed, 19 Dec 2018 10:48:53 +0100] rev 2473
Removed nonsense code, that I should have check more in details before merging m(

Tue, 18 Dec 2018 14:12:16 +0100Allow easier monkey patching of WAMP connector Session class
Edouard Tisserant [Tue, 18 Dec 2018 14:12:16 +0100] rev 2472
Allow easier monkey patching of WAMP connector Session class

Tue, 18 Dec 2018 14:10:43 +0100Expose new PLCObject API members to WAMP interface.
Edouard Tisserant [Tue, 18 Dec 2018 14:10:43 +0100] rev 2471
Expose new PLCObject API members to WAMP interface.

Tue, 18 Dec 2018 14:08:11 +0100Use another way to ensure compatibility with Py3 about text type.
Edouard Tisserant [Tue, 18 Dec 2018 14:08:11 +0100] rev 2470
Use another way to ensure compatibility with Py3 about text type.

Mon, 10 Dec 2018 11:22:43 +0100Make easier to read console error message in case of connection problem.
Edouard Tisserant [Mon, 10 Dec 2018 11:22:43 +0100] rev 2469
Make easier to read console error message in case of connection problem.

Wed, 05 Dec 2018 14:05:35 +0100PYRO(S): Added timeout on client side to allow unfreezing IDE after some time when communication with target dropped
Edouard Tisserant [Wed, 05 Dec 2018 14:05:35 +0100] rev 2468
PYRO(S): Added timeout on client side to allow unfreezing IDE after some time when communication with target dropped

Wed, 05 Dec 2018 13:05:51 +0100Enure that autostart blocks other @RunInMain PLCObject methods, and _unblocks_ them once autostart is done...
Edouard Tisserant [Wed, 05 Dec 2018 13:05:51 +0100] rev 2467
Enure that autostart blocks other @RunInMain PLCObject methods, and _unblocks_ them once autostart is done...

Wed, 05 Dec 2018 13:04:37 +0100Fixed Discovery panel in URI Editor dialog : double click works back again, and avoid setting URI to unicode type.
Edouard Tisserant [Wed, 05 Dec 2018 13:04:37 +0100] rev 2466
Fixed Discovery panel in URI Editor dialog : double click works back again, and avoid setting URI to unicode type.

Wed, 05 Dec 2018 13:03:09 +0100Bigger chunks, from 16k to 1M
Edouard Tisserant [Wed, 05 Dec 2018 13:03:09 +0100] rev 2465
Bigger chunks, from 16k to 1M

Wed, 05 Dec 2018 11:35:18 +0100Empirically reverted calls done just after NewPLC back to the order as it was before chunked transfer. Apparently I broke something... To be continued
Edouard Tisserant [Wed, 05 Dec 2018 11:35:18 +0100] rev 2464
Empirically reverted calls done just after NewPLC back to the order as it was before chunked transfer. Apparently I broke something... To be continued

Tue, 04 Dec 2018 11:31:58 +0100Chunk based transfer for PLC binary and extra files, and some collateral code refactoring.
Edouard Tisserant [Tue, 04 Dec 2018 11:31:58 +0100] rev 2463
Chunk based transfer for PLC binary and extra files, and some collateral code refactoring.

Tue, 27 Nov 2018 13:34:14 +0100Fix failing PLC build when building freshly created project that use default libraries blocks. When controller loads libraries according to attibutes in project files (BeremizRoot/Enable_{libname}_Library), use known default if attribute is missing.
Edouard Tisserant [Tue, 27 Nov 2018 13:34:14 +0100] rev 2462
Fix failing PLC build when building freshly created project that use default libraries blocks. When controller loads libraries according to attibutes in project files (BeremizRoot/Enable_{libname}_Library), use known default if attribute is missing.

Tue, 27 Nov 2018 10:54:13 +0100Cosmetic change in PSKManagement.py
Edouard Tisserant [Tue, 27 Nov 2018 10:54:13 +0100] rev 2461
Cosmetic change in PSKManagement.py

Mon, 26 Nov 2018 15:12:18 +0100Fixed ID,last URI, or last connection date not being updated when connnecting to target.
Edouard Tisserant [Mon, 26 Nov 2018 15:12:18 +0100] rev 2460
Fixed ID,last URI, or last connection date not being updated when connnecting to target.

Fri, 23 Nov 2018 12:13:24 +0100Merged. Some changes that should already have been incuded during previous merge (mostly about PlcStatus) have been included this time.
Edouard Tisserant [Fri, 23 Nov 2018 12:13:24 +0100] rev 2459
Merged. Some changes that should already have been incuded during previous merge (mostly about PlcStatus) have been included this time.

Fri, 23 Nov 2018 11:01:20 +0100IDManager : small cosmetic fixes and cleanup.
Edouard Tisserant [Fri, 23 Nov 2018 11:01:20 +0100] rev 2458
IDManager : small cosmetic fixes and cleanup.

Fri, 12 Oct 2018 13:24:47 +0300python3 support: pylint, W1633 # (round-builtin) round built-in referenced
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 12 Oct 2018 13:24:47 +0300] rev 2457
python3 support: pylint, W1633 # (round-builtin) round built-in referenced

because round behavior is changed to default behavior in Python3
(Banker round). It can cause slight differences in some cases.
Mostly graphical editors are affected, there could be single pixel differences.
Now I couldn't locate any visual differences in test programs.

Fri, 12 Oct 2018 12:06:45 +0300python3 support: pylint,W1610 # (reduce-builtin) reduce built-in referenced
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 12 Oct 2018 12:06:45 +0300] rev 2456
python3 support: pylint,W1610 # (reduce-builtin) reduce built-in referenced

Fri, 12 Oct 2018 11:50:40 +0300python3 support: pylint, W1653 # (next-method-defined) next method defined
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 12 Oct 2018 11:50:40 +0300] rev 2455
python3 support: pylint, W1653 # (next-method-defined) next method defined

Fri, 12 Oct 2018 11:35:15 +0300python3 support: pylint, W1622 # (next-method-called) Called a next() method on an object
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 12 Oct 2018 11:35:15 +0300] rev 2454
python3 support: pylint, W1622 # (next-method-called) Called a next() method on an object

Fri, 12 Oct 2018 11:14:34 +0300python3 support: pylint, W1625 # (raising-string) Raising a string exception
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 12 Oct 2018 11:14:34 +0300] rev 2453
python3 support: pylint, W1625 # (raising-string) Raising a string exception

Fri, 12 Oct 2018 10:42:47 +0300python3 support: pylint, W1624 # (indexing-exception) Indexing exceptions will not work on Python 3
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 12 Oct 2018 10:42:47 +0300] rev 2452
python3 support: pylint, W1624 # (indexing-exception) Indexing exceptions will not work on Python 3

Thu, 11 Oct 2018 12:09:04 +0300python3 support: pylint, W1611 # (standarderror-builtin) StandardError built-in referenced
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 11 Oct 2018 12:09:04 +0300] rev 2451
python3 support: pylint, W1611 # (standarderror-builtin) StandardError built-in referenced

Thu, 11 Oct 2018 12:00:40 +0300python3 support: pylint, W1652 # (deprecated-types-field) Accessing a deprecated fields on the types module
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 11 Oct 2018 12:00:40 +0300] rev 2450
python3 support: pylint, W1652 # (deprecated-types-field) Accessing a deprecated fields on the types module

Thu, 11 Oct 2018 10:25:19 +0300python3 support: pylint, W1651 (deprecated-itertools-function) Accessing a deprecated function on the itertools module
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 11 Oct 2018 10:25:19 +0300] rev 2449
python3 support: pylint, W1651 (deprecated-itertools-function) Accessing a deprecated function on the itertools module

It's even 20% faster, than previous code. On python3 zip is even much more faster.

Thu, 11 Oct 2018 10:01:12 +0300python3 support: pylint, W1649 # (deprecated-string-function) Accessing a deprecated function on the string module
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 11 Oct 2018 10:01:12 +0300] rev 2448
python3 support: pylint, W1649 # (deprecated-string-function) Accessing a deprecated function on the string module

Thu, 11 Oct 2018 09:41:15 +0300python3 support: pylint, W1645 # (exception-message-attribute) Exception.message removed in Python 3
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 11 Oct 2018 09:41:15 +0300] rev 2447
python3 support: pylint, W1645 # (exception-message-attribute) Exception.message removed in Python 3

Wed, 10 Oct 2018 10:50:00 +0300python3 support: pylint, W1646 # (invalid-str-codec) non-text encoding used in str.decode
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 10 Oct 2018 10:50:00 +0300] rev 2446
python3 support: pylint, W1646 # (invalid-str-codec) non-text encoding used in str.decode

Wed, 10 Oct 2018 10:36:07 +0300python3 support: pylint,W1602 # (basestring-builtin) basestring built-in referenced
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 10 Oct 2018 10:36:07 +0300] rev 2445
python3 support: pylint,W1602 # (basestring-builtin) basestring built-in referenced

Wed, 10 Oct 2018 10:32:57 +0300python3 support: pylint, W1629 # (nonzero-method) __nonzero__ method defined
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 10 Oct 2018 10:32:57 +0300] rev 2444
python3 support: pylint, W1629 # (nonzero-method) __nonzero__ method defined

Wed, 10 Oct 2018 10:26:27 +0300python3 support: pylint, W1606 # (execfile-builtin) execfile built-in referenced
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 10 Oct 2018 10:26:27 +0300] rev 2443
python3 support: pylint, W1606 # (execfile-builtin) execfile built-in referenced

Tue, 09 Oct 2018 14:03:44 +0300python3 support: pylint, W1607 # (file-builtin) file built-in referenced
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 09 Oct 2018 14:03:44 +0300] rev 2442
python3 support: pylint, W1607 # (file-builtin) file built-in referenced

Tue, 09 Oct 2018 13:50:29 +0300python3 support: pylint, W1659 # (xreadlines-attribute) Accessing a removed xreadlines attribute
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 09 Oct 2018 13:50:29 +0300] rev 2441
python3 support: pylint, W1659 # (xreadlines-attribute) Accessing a removed xreadlines attribute

Tue, 09 Oct 2018 12:05:43 +0300python3 support: pylint, W1601 # (apply-builtin) apply built-in referenced
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 09 Oct 2018 12:05:43 +0300] rev 2440
python3 support: pylint, W1601 # (apply-builtin) apply built-in referenced

Tue, 09 Oct 2018 11:56:45 +0300Fix pep8 warning: W605 invalid escape sequence ?x?
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 09 Oct 2018 11:56:45 +0300] rev 2439
Fix pep8 warning: W605 invalid escape sequence ?x?

Tue, 09 Oct 2018 11:43:39 +0300pep8, ignore W606 'async' and 'await' are reserved keywords starting with Python 3.7
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 09 Oct 2018 11:43:39 +0300] rev 2438
pep8, ignore W606 'async' and 'await' are reserved keywords starting with Python 3.7

This error exists in pyjs extension, but pyjs isn't going to Python3.
'noqa' isn't working for W606, so this warning is disabled completely.
'async' and 'await' are still checked by pylint.

Fri, 05 Oct 2018 14:22:01 +0300python3 support: pylint, W1619 #(old-division) division w/o __future__ statement
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 05 Oct 2018 14:22:01 +0300] rev 2437
python3 support: pylint, W1619 #(old-division) division w/o __future__ statement

Fri, 05 Oct 2018 13:48:54 +0300Make easier to run pytest on local X-server
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 05 Oct 2018 13:48:54 +0300] rev 2436
Make easier to run pytest on local X-server

Fri, 05 Oct 2018 13:11:28 +0300cleanup pyc files between running pytest
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 05 Oct 2018 13:11:28 +0300] rev 2435
cleanup pyc files between running pytest

this is need to avoid problem sometimes tests are run inside docker
container and sometimes local.

Traceback (most recent call last):
File "/usr/lib/python2.7/dist-packages/_pytest/config/__init__.py", line 409, in _importconftest
mod = conftestpath.pyimport()
File "/usr/lib/python2.7/dist-packages/py/_path/local.py", line 686, in pyimport
raise self.ImportMismatchError(modname, modfile, self)
ImportMismatchError: ('conftest', '/beremiz/tests/tools/conftest.py', local('/home/developer/beremiz/tests/tools/conftest.py'))
ERROR: could not load /home/developer/beremiz/tests/tools/conftest.py

Thu, 04 Oct 2018 17:24:40 +0300python3 support: pylint, W1612 # (unicode-builtin) unicode built-in referenced
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 04 Oct 2018 17:24:40 +0300] rev 2434
python3 support: pylint, W1612 # (unicode-builtin) unicode built-in referenced

Thu, 04 Oct 2018 12:09:23 +0300Use multiple processes to speed up pylint
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 04 Oct 2018 12:09:23 +0300] rev 2433
Use multiple processes to speed up pylint

0 will auto-detect the number of processors available to use.
version 1.6.5 (Debian 9.5) hangs for some reason in multi-process mode.

Thu, 04 Oct 2018 12:07:16 +0300python3 support: pylint, W1613 # (xrange-builtin) xrange built-in referenced
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 04 Oct 2018 12:07:16 +0300] rev 2432
python3 support: pylint, W1613 # (xrange-builtin) xrange built-in referenced

Thu, 04 Oct 2018 11:25:42 +0300python3 support: pylint, W1648 # (bad-python3-import) Module moved in Python 3
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 04 Oct 2018 11:25:42 +0300] rev 2431
python3 support: pylint, W1648 # (bad-python3-import) Module moved in Python 3

Fri, 23 Nov 2018 00:45:51 +0100Fixed regression in connecting to LOCAL:// targets
Edouard Tisserant <edouard.tisserant@gmail.com> [Fri, 23 Nov 2018 00:45:51 +0100] rev 2430
Fixed regression in connecting to LOCAL:// targets

Fri, 23 Nov 2018 00:33:04 +0100Merge, with surprizingly little conflicts
Edouard Tisserant <edouard.tisserant@gmail.com> [Fri, 23 Nov 2018 00:33:04 +0100] rev 2429
Merge, with surprizingly little conflicts

Thu, 22 Nov 2018 23:39:54 +0100IDManager : finished Import/Export. Added merging capability to import (asks if particular ID is replaced during import). Added ESC as closing shortcut to IDManager dialog, and adjusted its size.
Edouard Tisserant [Thu, 22 Nov 2018 23:39:54 +0100] rev 2428
IDManager : finished Import/Export. Added merging capability to import (asks if particular ID is replaced during import). Added ESC as closing shortcut to IDManager dialog, and adjusted its size.

Wed, 03 Oct 2018 15:47:59 +0300merge
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 03 Oct 2018 15:47:59 +0300] rev 2427
merge

Wed, 03 Oct 2018 14:20:57 +0300Update localization template
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 03 Oct 2018 14:20:57 +0300] rev 2426
Update localization template

Wed, 03 Oct 2018 14:19:41 +0300Fix 'msgid' format string with unnamed arguments cannot be properly localized
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 03 Oct 2018 14:19:41 +0300] rev 2425
Fix 'msgid' format string with unnamed arguments cannot be properly localized

Wed, 03 Oct 2018 14:17:19 +0300Add automatic check for localization strings with multiple unnamed arguments
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 03 Oct 2018 14:17:19 +0300] rev 2424
Add automatic check for localization strings with multiple unnamed arguments

Wed, 03 Oct 2018 12:43:35 +0300Improve localization support in etherlab (mostly)
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 03 Oct 2018 12:43:35 +0300] rev 2423
Improve localization support in etherlab (mostly)

Wed, 03 Oct 2018 12:07:56 +0300cleanup etherlab: pylint, W0602 (global-variable-not-assigned) Using global for 'X' but no assignment is done
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 03 Oct 2018 12:07:56 +0300] rev 2422
cleanup etherlab: pylint, W0602 (global-variable-not-assigned) Using global for 'X' but no assignment is done

Wed, 03 Oct 2018 11:48:05 +0300cleanup: pylint, W0109 # (duplicate-key) Duplicate key 'X' in dictionary
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 03 Oct 2018 11:48:05 +0300] rev 2421
cleanup: pylint, W0109 # (duplicate-key) Duplicate key 'X' in dictionary

Wed, 03 Oct 2018 11:47:04 +0300Add python3 syntax checking to CI
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 03 Oct 2018 11:47:04 +0300] rev 2420
Add python3 syntax checking to CI

Wed, 03 Oct 2018 11:44:57 +0300Fix old style exception raise and exec syntax
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 03 Oct 2018 11:44:57 +0300] rev 2419
Fix old style exception raise and exec syntax

Tue, 02 Oct 2018 18:08:49 +0300Use python 3 compatible exception syntax everywhere
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 02 Oct 2018 18:08:49 +0300] rev 2418
Use python 3 compatible exception syntax everywhere

Tue, 02 Oct 2018 17:18:09 +0300cleanup: pylint, R0123 # (literal-comparison) Comparison to literal
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 02 Oct 2018 17:18:09 +0300] rev 2417
cleanup: pylint, R0123 # (literal-comparison) Comparison to literal

Tue, 02 Oct 2018 16:53:14 +0300Use predefined constants for PlcStatus instead of string literals
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 02 Oct 2018 16:53:14 +0300] rev 2416
Use predefined constants for PlcStatus instead of string literals

Mon, 01 Oct 2018 15:53:34 +0300cleanup: pylint, R1704 # (redefined-argument-from-local) Redefining argument with the local name 'Y'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 01 Oct 2018 15:53:34 +0300] rev 2415
cleanup: pylint, R1704 # (redefined-argument-from-local) Redefining argument with the local name 'Y'

Mon, 01 Oct 2018 15:36:01 +0300cleanup: pylint, R1701 # (consider-merging-isinstance) Consider merging these isinstance calls to isinstance(CTNLDFLAGS, (str, unicode))
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 01 Oct 2018 15:36:01 +0300] rev 2414
cleanup: pylint, R1701 # (consider-merging-isinstance) Consider merging these isinstance calls to isinstance(CTNLDFLAGS, (str, unicode))

Mon, 01 Oct 2018 14:29:01 +0300cleanup: pylint, E1304 # (missing-format-string-key) Missing key 'X_name' in format string dictionary
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 01 Oct 2018 14:29:01 +0300] rev 2413
cleanup: pylint, E1304 # (missing-format-string-key) Missing key 'X_name' in format string dictionary

Mon, 01 Oct 2018 14:13:05 +0300cleanup: pylint, E1300 # (bad-format-character) Unsupported format character '"' (0x22) at index 17
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 01 Oct 2018 14:13:05 +0300] rev 2412
cleanup: pylint, E1300 # (bad-format-character) Unsupported format character '"' (0x22) at index 17

Mon, 01 Oct 2018 13:43:50 +0300cleanup: pylint, W0111 # (assign-to-new-keyword) Name async will become a keyword in Python 3.7
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 01 Oct 2018 13:43:50 +0300] rev 2411
cleanup: pylint, W0111 # (assign-to-new-keyword) Name async will become a keyword in Python 3.7

Mon, 01 Oct 2018 13:31:52 +0300cleanup: pylint, E1310 (bad-str-strip-call) Suspicious argument in str.strip call
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 01 Oct 2018 13:31:52 +0300] rev 2410
cleanup: pylint, E1310 (bad-str-strip-call) Suspicious argument in str.strip call

Mon, 01 Oct 2018 12:04:58 +0300Fix segmentation fault when last lines in text POUs should be highlighted
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 01 Oct 2018 12:04:58 +0300] rev 2409
Fix segmentation fault when last lines in text POUs should be highlighted

Sat, 29 Sep 2018 19:18:50 +0300enable etherlab checks
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 19:18:50 +0300] rev 2408
enable etherlab checks

resort enabled pylint check to move likely-most invasive changes to the end

Sat, 29 Sep 2018 19:10:43 +0300clean etherlab: pylint, C0330 # (bad-continuation) Wrong hanging indentation before block
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 19:10:43 +0300] rev 2407
clean etherlab: pylint, C0330 # (bad-continuation) Wrong hanging indentation before block

Sat, 29 Sep 2018 18:59:41 +0300clean etherlab: pylint, W0612 # (unused-variable) Unused variable 'X'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 18:59:41 +0300] rev 2406
clean etherlab: pylint, W0612 # (unused-variable) Unused variable 'X'

Sat, 29 Sep 2018 17:52:33 +0300clean etherlab: pylint, W1618 # (no-absolute-import) import missing `from __future__ import absolute_import`
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 17:52:33 +0300] rev 2405
clean etherlab: pylint, W1618 # (no-absolute-import) import missing `from __future__ import absolute_import`

Sat, 29 Sep 2018 17:39:21 +0300clean etherlab: pylint,E0602 # (undefined-variable) Undefined variable 'X'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 17:39:21 +0300] rev 2404
clean etherlab: pylint,E0602 # (undefined-variable) Undefined variable 'X'

Sat, 29 Sep 2018 17:12:44 +0300clean etherlab: pylint, E1136 # (unsubscriptable-object) Value 'X' is unsubscriptable
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 17:12:44 +0300] rev 2403
clean etherlab: pylint, E1136 # (unsubscriptable-object) Value 'X' is unsubscriptable

Sat, 29 Sep 2018 17:00:01 +0300ignore missing MotionLibrary
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 17:00:01 +0300] rev 2402
ignore missing MotionLibrary

to fix pylint error 'E0401 # (import-error) Unable to import 'X'

Sat, 29 Sep 2018 16:57:25 +0300clean etherlab: pylint, E0611 # (no-name-in-module) No name 'X' in module 'Y'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 16:57:25 +0300] rev 2401
clean etherlab: pylint, E0611 # (no-name-in-module) No name 'X' in module 'Y'

Sat, 29 Sep 2018 16:53:46 +0300clean etherlab: pylint, C0123 # (unidiomatic-typecheck) Using type() instead of isinstance() for a typecheck.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 16:53:46 +0300] rev 2400
clean etherlab: pylint, C0123 # (unidiomatic-typecheck) Using type() instead of isinstance() for a typecheck.

Sat, 29 Sep 2018 16:48:25 +0300clean etherlab: pylint, W0104 # (pointless-statement) Statement seems to have no effect
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 16:48:25 +0300] rev 2399
clean etherlab: pylint, W0104 # (pointless-statement) Statement seems to have no effect

Sat, 29 Sep 2018 16:46:41 +0300clean etherlab: pylint, W0631 # (undefined-loop-variable) Using possibly undefined loop variable 'X'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 16:46:41 +0300] rev 2398
clean etherlab: pylint, W0631 # (undefined-loop-variable) Using possibly undefined loop variable 'X'

Sat, 29 Sep 2018 16:40:56 +0300clean etherlab: pylint, C1001 # (old-style-class) Old-style class defined.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 16:40:56 +0300] rev 2397
clean etherlab: pylint, C1001 # (old-style-class) Old-style class defined.

Sat, 29 Sep 2018 16:39:25 +0300clean etherlab: pylint, W0611 # (unused-import) Unused import X
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 16:39:25 +0300] rev 2396
clean etherlab: pylint, W0611 # (unused-import) Unused import X

Sat, 29 Sep 2018 16:35:38 +0300clean etherlab: pylint, E0102 # (function-redefined) method already defined
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 16:35:38 +0300] rev 2395
clean etherlab: pylint, E0102 # (function-redefined) method already defined

Sat, 29 Sep 2018 16:33:22 +0300clean etherlab: pylint, W0105 # (pointless-string-statement) String statement has no effect
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 16:33:22 +0300] rev 2394
clean etherlab: pylint, W0105 # (pointless-string-statement) String statement has no effect

Sat, 29 Sep 2018 16:31:54 +0300clean etherlab: pylint,W0231 # (super-init-not-called) __init__ method from base class is not called
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 16:31:54 +0300] rev 2393
clean etherlab: pylint,W0231 # (super-init-not-called) __init__ method from base class is not called

Sat, 29 Sep 2018 16:29:41 +0300clean etherlab: pylint, C0412 # (ungrouped-imports) Imports from package X are not grouped
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 16:29:41 +0300] rev 2392
clean etherlab: pylint, C0412 # (ungrouped-imports) Imports from package X are not grouped

Sat, 29 Sep 2018 16:23:20 +0300clean etherlab: pylint,W0108 # (unnecessary-lambda) Lambda may not be necessary
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 16:23:20 +0300] rev 2391
clean etherlab: pylint,W0108 # (unnecessary-lambda) Lambda may not be necessary

Sat, 29 Sep 2018 16:19:15 +0300clean etherlab: pylint, C0411 # (wrong-import-order) standard import "import x" comes before "import y"
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 16:19:15 +0300] rev 2390
clean etherlab: pylint, C0411 # (wrong-import-order) standard import "import x" comes before "import y"

Sat, 29 Sep 2018 16:17:04 +0300clean etherlab: pylint, W0404 # reimported module
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 16:17:04 +0300] rev 2389
clean etherlab: pylint, W0404 # reimported module

Sat, 29 Sep 2018 15:41:20 +0300check_source.sh: add E301 check to the list of selected PEP8 errors
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 15:41:20 +0300] rev 2388
check_source.sh: add E301 check to the list of selected PEP8 errors

Sat, 29 Sep 2018 15:38:49 +0300clean etherlab: pep8, E301 expected 2 blank lines, found 1
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 15:38:49 +0300] rev 2387
clean etherlab: pep8, E301 expected 2 blank lines, found 1

Sat, 29 Sep 2018 15:35:22 +0300clean etherlab: pep8, W503 line break before binary operator
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 15:35:22 +0300] rev 2386
clean etherlab: pep8, W503 line break before binary operator

Sat, 29 Sep 2018 15:33:41 +0300clean etherlab: pep8, E266 too many leading '#' for block comment
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 15:33:41 +0300] rev 2385
clean etherlab: pep8, E266 too many leading '#' for block comment

Sat, 29 Sep 2018 15:31:50 +0300clean etherlab: pep8, E122 continuation line missing indentation or outdented
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 15:31:50 +0300] rev 2384
clean etherlab: pep8, E122 continuation line missing indentation or outdented

Sat, 29 Sep 2018 15:24:07 +0300clean etherlab: pep8, W191 indentation contains tabs
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 15:24:07 +0300] rev 2383
clean etherlab: pep8, W191 indentation contains tabs

Sat, 29 Sep 2018 15:21:06 +0300clean etherlab: pep8, E211 whitespace before '['
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 15:21:06 +0300] rev 2382
clean etherlab: pep8, E211 whitespace before '['

Sat, 29 Sep 2018 15:16:21 +0300clean etherlab: pep8, E129 visually indented line with same indent as next logical line
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 15:16:21 +0300] rev 2381
clean etherlab: pep8, E129 visually indented line with same indent as next logical line

Sat, 29 Sep 2018 15:03:17 +0300clean etherlab: pep8, E127 continuation line over-indented for visual indent
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 15:03:17 +0300] rev 2380
clean etherlab: pep8, E127 continuation line over-indented for visual indent

Sat, 29 Sep 2018 14:57:15 +0300clean etherlab: pep8, E129 visually indented line with same indent as next logical line
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 14:57:15 +0300] rev 2379
clean etherlab: pep8, E129 visually indented line with same indent as next logical line

Sat, 29 Sep 2018 13:44:02 +0300clean etherlab: pep8, W602 deprecated form of raising exception
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 13:44:02 +0300] rev 2378
clean etherlab: pep8, W602 deprecated form of raising exception

Sat, 29 Sep 2018 13:34:06 +0300clean etherlab: pep8, W601 .has_key() is deprecated, use 'in'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 13:34:06 +0300] rev 2377
clean etherlab: pep8, W601 .has_key() is deprecated, use 'in'

Sat, 29 Sep 2018 13:30:41 +0300clean etherlab: pep8, E731 do not assign a lambda expression, use a def
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 13:30:41 +0300] rev 2376
clean etherlab: pep8, E731 do not assign a lambda expression, use a def

Sat, 29 Sep 2018 13:29:20 +0300clean etherlab: pep8, E203 whitespace before ','
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 13:29:20 +0300] rev 2375
clean etherlab: pep8, E203 whitespace before ','

Sat, 29 Sep 2018 13:04:33 +0300clean etherlab: pep8, E712 comparison to True should be 'if cond is True:' or 'if cond:'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 13:04:33 +0300] rev 2374
clean etherlab: pep8, E712 comparison to True should be 'if cond is True:' or 'if cond:'

Sat, 29 Sep 2018 12:55:56 +0300clean etherlab: pep8, E222 multiple spaces after operator
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 12:55:56 +0300] rev 2373
clean etherlab: pep8, E222 multiple spaces after operator

Sat, 29 Sep 2018 12:54:42 +0300clean etherlab: pep8, E741 ambiguous variable name 'l'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 12:54:42 +0300] rev 2372
clean etherlab: pep8, E741 ambiguous variable name 'l'

Sat, 29 Sep 2018 12:48:28 +0300cleanup etherlab: pep8, E306 expected 1 blank line before a nested definition, found X
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 29 Sep 2018 12:48:28 +0300] rev 2371
cleanup etherlab: pep8, E306 expected 1 blank line before a nested definition, found X

Fri, 28 Sep 2018 19:30:16 +0300cleanup etherlab: pep8, E305 expected 2 blank lines after class or function definition, found X
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 28 Sep 2018 19:30:16 +0300] rev 2370
cleanup etherlab: pep8, E305 expected 2 blank lines after class or function definition, found X

Fri, 28 Sep 2018 19:25:18 +0300cleanup etherlab: pep8, E201 whitespace after '('
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 28 Sep 2018 19:25:18 +0300] rev 2369
cleanup etherlab: pep8, E201 whitespace after '('

Fri, 28 Sep 2018 19:22:14 +0300cleanup etherlab: pep8, E202 whitespace before ')'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 28 Sep 2018 19:22:14 +0300] rev 2368
cleanup etherlab: pep8, E202 whitespace before ')'

Fri, 28 Sep 2018 19:20:32 +0300cleanup etherlab: pep8, E227 missing whitespace around bitwise or shift operator
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 28 Sep 2018 19:20:32 +0300] rev 2367
cleanup etherlab: pep8, E227 missing whitespace around bitwise or shift operator

Fri, 28 Sep 2018 19:16:12 +0300cleanup etherlab: pep8, E251 unexpected spaces around keyword / parameter equals
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 28 Sep 2018 19:16:12 +0300] rev 2366
cleanup etherlab: pep8, E251 unexpected spaces around keyword / parameter equals

Fri, 28 Sep 2018 19:12:26 +0300cleanup etherlab: pep8, E225 missing whitespace around operator
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 28 Sep 2018 19:12:26 +0300] rev 2365
cleanup etherlab: pep8, E225 missing whitespace around operator

Fri, 28 Sep 2018 19:06:28 +0300cleanup etherlab: pep8, E303 too many blank lines (2)
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 28 Sep 2018 19:06:28 +0300] rev 2364
cleanup etherlab: pep8, E303 too many blank lines (2)

Fri, 28 Sep 2018 19:02:49 +0300cleanup etherlab: pep8, E231 missing whitespace after ','
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 28 Sep 2018 19:02:49 +0300] rev 2363
cleanup etherlab: pep8, E231 missing whitespace after ','

Fri, 28 Sep 2018 18:12:18 +0300cleanup etherlab: pep8, E271 multiple spaces after keyword
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 28 Sep 2018 18:12:18 +0300] rev 2362
cleanup etherlab: pep8, E271 multiple spaces after keyword

Fri, 28 Sep 2018 18:06:59 +0300cleanup etherlab: pep8, E261 at least two spaces before inline comment
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 28 Sep 2018 18:06:59 +0300] rev 2361
cleanup etherlab: pep8, E261 at least two spaces before inline comment

Fri, 28 Sep 2018 18:04:28 +0300cleanup etherlab: pep8, E302 expected 2 blank lines, found 1
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 28 Sep 2018 18:04:28 +0300] rev 2360
cleanup etherlab: pep8, E302 expected 2 blank lines, found 1

Fri, 28 Sep 2018 18:00:50 +0300cleanup etherlab: pep8, W293 blank line contains whitespace
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 28 Sep 2018 18:00:50 +0300] rev 2359
cleanup etherlab: pep8, W293 blank line contains whitespace

Fri, 28 Sep 2018 17:59:28 +0300cleanup etherlab: pep8, E228 missing whitespace around modulo operator
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 28 Sep 2018 17:59:28 +0300] rev 2358
cleanup etherlab: pep8, E228 missing whitespace around modulo operator

Fri, 28 Sep 2018 17:52:30 +0300cleanup etherlab: pep8, E401 multiple imports on one line
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 28 Sep 2018 17:52:30 +0300] rev 2357
cleanup etherlab: pep8, E401 multiple imports on one line

Fri, 28 Sep 2018 17:48:10 +0300cleanup etherlab: pep8, E265 block comment should start with '# '
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 28 Sep 2018 17:48:10 +0300] rev 2356
cleanup etherlab: pep8, E265 block comment should start with '# '

Fri, 28 Sep 2018 17:20:11 +0300cleanup etherlab: pep8, W291 trailing whitespace
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 28 Sep 2018 17:20:11 +0300] rev 2355
cleanup etherlab: pep8, W291 trailing whitespace

Fri, 28 Sep 2018 17:15:53 +0300convert some etherlab source files to unix format
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 28 Sep 2018 17:15:53 +0300] rev 2354
convert some etherlab source files to unix format

Fri, 28 Sep 2018 17:14:42 +0300cleanup etherlab: pep8, E722 do not use bare except
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 28 Sep 2018 17:14:42 +0300] rev 2353
cleanup etherlab: pep8, E722 do not use bare except

Fri, 28 Sep 2018 13:21:06 +0300Ignore cache files and generated test reports
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 28 Sep 2018 13:21:06 +0300] rev 2352
Ignore cache files and generated test reports

Fri, 28 Sep 2018 13:17:30 +0300Update Beremiz translations and list of translators
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 28 Sep 2018 13:17:30 +0300] rev 2351
Update Beremiz translations and list of translators

Added Turkish, Romania, Portuguese, Polish, Dutch, Hungarian.
Most existed translation are updated.

Fri, 28 Sep 2018 13:07:46 +0300Use the list of supported by app translations instead of supported translations by wx
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 28 Sep 2018 13:07:46 +0300] rev 2350
Use the list of supported by app translations instead of supported translations by wx

This will make possible to translate application into locales, that
are not explicitly supported by wx: for example, 'pl' or 'bn_BD', 'bn_IN'.

Fri, 28 Sep 2018 12:54:14 +0300Suppress message box in case current locale is unsupported or missing in wx
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 28 Sep 2018 12:54:14 +0300] rev 2349
Suppress message box in case current locale is unsupported or missing in wx

Beremiz can still be translated into it using own locales
available in './locale'.

Thu, 27 Sep 2018 19:07:57 +0300Add commands to pull translation from transifex
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 27 Sep 2018 19:07:57 +0300] rev 2348
Add commands to pull translation from transifex

tx - transifex cli client should be installed in the system.
It's free software and is available in Debian archive.

Run following commands:
1. Init your authorization token
$ make transifex_init

2. Pull translations
$ make transifex_pull

Wed, 26 Sep 2018 18:08:57 +0300Add custom dialog to add/edit comment block in graphical editors
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 26 Sep 2018 18:08:57 +0300] rev 2347
Add custom dialog to add/edit comment block in graphical editors

That allows to edit comment and immediately see how it'll be shown on wiresheet.

Wed, 26 Sep 2018 14:20:51 +0300Cleanup examples so they look clean, nice and almost the same on Windows and GNU/Linux
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 26 Sep 2018 14:20:51 +0300] rev 2346
Cleanup examples so they look clean, nice and almost the same on Windows and GNU/Linux

Wed, 26 Sep 2018 14:15:22 +0300use the same font size on Windows and GNU/Linux
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 26 Sep 2018 14:15:22 +0300] rev 2345
use the same font size on Windows and GNU/Linux

Wed, 26 Sep 2018 12:13:23 +0300use nice and pretty mono font in graphical languages (SFC, FBD, LD) as well
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 26 Sep 2018 12:13:23 +0300] rev 2344
use nice and pretty mono font in graphical languages (SFC, FBD, LD) as well

it looks like that was original idea, but some bug squashed in and
default font was used for POU.

at the same time fix use of mono font in the header of Variable panel
for SFC/FBD/LD POUs.

Tue, 25 Sep 2018 19:00:03 +0300Don't need to call extra _init_
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 25 Sep 2018 19:00:03 +0300] rev 2343
Don't need to call extra _init_

_init_ is already called for value in infos["elmt_type"]["initial"]().
Additional _init_() creates second set of child element and that
creates unusable xml project.
This regression cause by not well tested commit "Proper fix for error
'object has no attribute 'getSlave' in EtherCAT extension" (96ca6b056c55595f71bfaca9f54b9e8646460c23)

Tue, 25 Sep 2018 18:31:17 +0300Fix black background in preview window
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 25 Sep 2018 18:31:17 +0300] rev 2342
Fix black background in preview window

Problem found and fixed on GNU/Linux
wxWidgets 3.0 built with GTK3+ support and running on Xorg.

Tue, 25 Sep 2018 18:29:10 +0300Avoid division by zero in case width or height for page are not specified
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 25 Sep 2018 18:29:10 +0300] rev 2341
Avoid division by zero in case width or height for page are not specified

traceback:
File "/home/developer/WorkData/PLC/beremiz/beremiz/editors/Viewer.py", line 3755, in OnPaint
self.DoDrawing(dc)
File "/home/developer/WorkData/PLC/beremiz/beremiz/editors/Viewer.py", line 3723, in DoDrawing
for y in xrange(self.PageSize[1] - (ystart * SCROLLBAR_UNIT) % self.PageSize[1], int(window_size[1] / self.ViewScale[1]), self.PageSize[1]):
<type 'exceptions.ZeroDivisionError'>: integer division or modulo by zero

Wed, 21 Nov 2018 14:10:51 +0100IDManager: added import/export plus little cosmetic enhancements.
Edouard Tisserant [Wed, 21 Nov 2018 14:10:51 +0100] rev 2340
IDManager: added import/export plus little cosmetic enhancements.

Tue, 20 Nov 2018 11:32:42 +0100IDManager : refactored a bit, moved some code into PSKManagement.py. Now captures URI and PSK on new PYRO(S) and propose them when editing URI. Import/export still to be implemented.
Edouard Tisserant [Tue, 20 Nov 2018 11:32:42 +0100] rev 2339
IDManager : refactored a bit, moved some code into PSKManagement.py. Now captures URI and PSK on new PYRO(S) and propose them when editing URI. Import/export still to be implemented.

Mon, 19 Nov 2018 10:39:50 +0100Renaming servicetype into scheme.
Edouard Tisserant [Mon, 19 Nov 2018 10:39:50 +0100] rev 2338
Renaming servicetype into scheme.

Fri, 16 Nov 2018 14:04:51 +0100Added toolbar button to launch ID Manager dialog.
Edouard Tisserant [Fri, 16 Nov 2018 14:04:51 +0100] rev 2337
Added toolbar button to launch ID Manager dialog.

Fri, 16 Nov 2018 10:00:06 +0100Renamed IDManager control into IDBrowser, because dialog will be named IDManager
Edouard Tisserant [Fri, 16 Nov 2018 10:00:06 +0100] rev 2336
Renamed IDManager control into IDBrowser, because dialog will be named IDManager

Wed, 14 Nov 2018 14:09:18 +0100IDManager.py : finished selector mode.
Edouard Tisserant [Wed, 14 Nov 2018 14:09:18 +0100] rev 2335
IDManager.py : finished selector mode.

Wed, 14 Nov 2018 11:32:08 +0100Added early implementation of IDManager.py. For now only used to select ID in URIEditor
Edouard Tisserant [Wed, 14 Nov 2018 11:32:08 +0100] rev 2334
Added early implementation of IDManager.py. For now only used to select ID in URIEditor

Fri, 09 Nov 2018 13:26:06 +0100Path may contain spaces... sequel of d1359cb
Edouard Tisserant [Fri, 09 Nov 2018 13:26:06 +0100] rev 2333
Path may contain spaces... sequel of d1359cb

Thu, 08 Nov 2018 14:33:35 +0100'Merged' URI editor dialog and Discovery dialog, also clean up related code
Edouard Tisserant [Thu, 08 Nov 2018 14:33:35 +0100] rev 2332
'Merged' URI editor dialog and Discovery dialog, also clean up related code

Thu, 08 Nov 2018 11:20:35 +0100Cut more useless code from URI Editor
Edouard Tisserant [Thu, 08 Nov 2018 11:20:35 +0100] rev 2331
Cut more useless code from URI Editor

Thu, 08 Nov 2018 11:14:06 +0100URI Editor Dialog : moved it to /dialog, and fixed naming.
Edouard Tisserant [Thu, 08 Nov 2018 11:14:06 +0100] rev 2330
URI Editor Dialog : moved it to /dialog, and fixed naming.

Thu, 08 Nov 2018 09:39:06 +0100URI editor : Rewrote most of it, cleaner.
Edouard Tisserant [Thu, 08 Nov 2018 09:39:06 +0100] rev 2329
URI editor : Rewrote most of it, cleaner.

Tue, 30 Oct 2018 14:08:28 +0100PSK : Stunnel and/or OpenSSL (undocumented) handles PSK better without special chars, apparently
Edouard Tisserant [Tue, 30 Oct 2018 14:08:28 +0100] rev 2328
PSK : Stunnel and/or OpenSSL (undocumented) handles PSK better without special chars, apparently

Tue, 30 Oct 2018 13:47:24 +0100Prevent PLCObject to be imported from IDE as a side effect of importing runtime package
Edouard Tisserant [Tue, 30 Oct 2018 13:47:24 +0100] rev 2327
Prevent PLCObject to be imported from IDE as a side effect of importing runtime package

Tue, 30 Oct 2018 09:46:46 +0100WAMP : ensure that unicode string is passed for published events IDs
Edouard Tisserant [Tue, 30 Oct 2018 09:46:46 +0100] rev 2326
WAMP : ensure that unicode string is passed for published events IDs

Tue, 30 Oct 2018 09:45:47 +0100PYRO PSK: adjusted cipher and key length to be usable with openSSL 1.0.2k.
Edouard Tisserant [Tue, 30 Oct 2018 09:45:47 +0100] rev 2325
PYRO PSK: adjusted cipher and key length to be usable with openSSL 1.0.2k.

Mon, 29 Oct 2018 11:33:36 +0100Automatically get PSK and ID when connecting to PYRO[S], so that future connection through PYROS can use that same key. Also fixed case to UPPER for *PSK.
Edouard Tisserant [Mon, 29 Oct 2018 11:33:36 +0100] rev 2324
Automatically get PSK and ID when connecting to PYRO[S], so that future connection through PYROS can use that same key. Also fixed case to UPPER for *PSK.

Tue, 23 Oct 2018 16:19:20 +0200Runtime : Ensure that a random PSK secret compatible with stunnel is generated if -s commandline switch is used. Stunnel service is restarted after generation, using spawn_subprocess. TODO : give stunnel restart command as a commandline parameter.
Edouard Tisserant [Tue, 23 Oct 2018 16:19:20 +0200] rev 2323
Runtime : Ensure that a random PSK secret compatible with stunnel is generated if -s commandline switch is used. Stunnel service is restarted after generation, using spawn_subprocess. TODO : give stunnel restart command as a commandline parameter.

Tue, 23 Oct 2018 16:13:34 +0200Added runtime/spawn_subprocess.py. Force use posix spawn instead of fork, with API similar to subprocess. Using fork in runtime is incompatible with Xenomai, because memory is locked and this can lead to out of memory error.
Edouard Tisserant [Tue, 23 Oct 2018 16:13:34 +0200] rev 2322
Added runtime/spawn_subprocess.py. Force use posix spawn instead of fork, with API similar to subprocess. Using fork in runtime is incompatible with Xenomai, because memory is locked and this can lead to out of memory error.

Tue, 23 Oct 2018 13:36:07 +0200Small cosmetic change to enhance readability and avoid confusion.
Edouard Tisserant [Tue, 23 Oct 2018 13:36:07 +0200] rev 2321
Small cosmetic change to enhance readability and avoid confusion.

Tue, 23 Oct 2018 13:34:15 +0200Force Zeroconf to listen and answer only on interface specified with '-i' command line argument.
Edouard Tisserant [Tue, 23 Oct 2018 13:34:15 +0200] rev 2320
Force Zeroconf to listen and answer only on interface specified with '-i' command line argument.

Tue, 23 Oct 2018 13:31:26 +0200Useless __name__ == '__main__' tests.
Edouard Tisserant [Tue, 23 Oct 2018 13:31:26 +0200] rev 2319
Useless __name__ == '__main__' tests.

Mon, 22 Oct 2018 12:58:10 +0200Fixed PYRO's PSK_Adapter : monkey patching was breaking non-PSK protocol, and import ssl was missing.
Edouard Tisserant [Mon, 22 Oct 2018 12:58:10 +0200] rev 2318
Fixed PYRO's PSK_Adapter : monkey patching was breaking non-PSK protocol, and import ssl was missing.

Fri, 19 Oct 2018 13:34:52 +0200merge
Edouard Tisserant [Fri, 19 Oct 2018 13:34:52 +0200] rev 2317
merge

Fri, 19 Oct 2018 13:29:52 +0200Fix PYROPSK protocol configuration. After a few iteration of trial and error it appears that TSLv1 and PSK ciphers needs to be specified
Edouard Tisserant [Fri, 19 Oct 2018 13:29:52 +0200] rev 2316
Fix PYROPSK protocol configuration. After a few iteration of trial and error it appears that TSLv1 and PSK ciphers needs to be specified

Thu, 18 Oct 2018 18:37:01 +0200merge
Edouard Tisserant <edouard.tisserant@gmail.com> [Thu, 18 Oct 2018 18:37:01 +0200] rev 2315
merge

Thu, 18 Oct 2018 13:17:48 +0200PYRO/TLSPSK : must use PYROLOC* protocol scheme in pyro URI, otherwise object ID is missing. Had to use more persuasive pyro3 monkey patching to have PYROLOCPSK resolved properly
Edouard Tisserant [Thu, 18 Oct 2018 13:17:48 +0200] rev 2314
PYRO/TLSPSK : must use PYROLOC* protocol scheme in pyro URI, otherwise object ID is missing. Had to use more persuasive pyro3 monkey patching to have PYROLOCPSK resolved properly

Thu, 18 Oct 2018 11:01:14 +0200PYRO/TLSPSK : fixed typos, used appropriate ciphers (https://github.com/drbild/sslpsk/issues/3), use PYROPSK instead of unresolvable PYROLOCPSK.
Edouard Tisserant [Thu, 18 Oct 2018 11:01:14 +0200] rev 2313
PYRO/TLSPSK : fixed typos, used appropriate ciphers (https://github.com/drbild/sslpsk/issues/3), use PYROPSK instead of unresolvable PYROLOCPSK.

Mon, 15 Oct 2018 16:26:59 +0200Replaced PYROSSL with PYROPSK.
Edouard Tisserant [Mon, 15 Oct 2018 16:26:59 +0200] rev 2312
Replaced PYROSSL with PYROPSK.
Secrets are files named $ID.secret in project's /psk directory.
Connect with URI formated PYROPSK://host[:port]#ID

Mon, 15 Oct 2018 15:27:47 +0200Beremiz_service now binds both pyro and nevow ports to interface given with '-i' argument.
Edouard Tisserant [Mon, 15 Oct 2018 15:27:47 +0200] rev 2311
Beremiz_service now binds both pyro and nevow ports to interface given with '-i' argument.

Mon, 15 Oct 2018 15:24:52 +0200Fixed typo in Wampclient.py
Edouard Tisserant [Mon, 15 Oct 2018 15:24:52 +0200] rev 2310
Fixed typo in Wampclient.py

Wed, 03 Oct 2018 00:05:32 +0200Please pylint and pep8
Edouard Tisserant <edouard.tisserant@gmail.com> [Wed, 03 Oct 2018 00:05:32 +0200] rev 2309
Please pylint and pep8

Tue, 02 Oct 2018 15:57:26 +0200Merged
Edouard Tisserant [Tue, 02 Oct 2018 15:57:26 +0200] rev 2308
Merged

Tue, 02 Oct 2018 15:56:09 +0200Show more exceptions on stdout, particularly those that are raised by AutoLoad (first item in Main Thread worker)
Edouard Tisserant [Tue, 02 Oct 2018 15:56:09 +0200] rev 2307
Show more exceptions on stdout, particularly those that are raised by AutoLoad (first item in Main Thread worker)

Tue, 02 Oct 2018 15:52:11 +0200Some cleanup in WampClient and added functions that are usefull for extensions that need to use pub/sub.
Edouard Tisserant [Tue, 02 Oct 2018 15:52:11 +0200] rev 2306
Some cleanup in WampClient and added functions that are usefull for extensions that need to use pub/sub.

Wed, 12 Sep 2018 22:59:30 +0200Merged in Andrey's branch
Edouard Tisserant <edouard.tisserant@gmail.com> [Wed, 12 Sep 2018 22:59:30 +0200] rev 2305
Merged in Andrey's branch

Fri, 07 Sep 2018 20:58:13 +0000Merged in yegorich/beremiz/py3-fix (pull request #36)
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 07 Sep 2018 20:58:13 +0000] rev 2304
Merged in yegorich/beremiz/py3-fix (pull request #36)

Use Python 3 compatible syntax for exceptions

Fri, 07 Sep 2018 09:24:52 +0200Use Python 3 compatible syntax for exceptions py3-fix
Yegor Yefremov <yegorslists@googlemail.com> [Fri, 07 Sep 2018 09:24:52 +0200] rev 2303
Use Python 3 compatible syntax for exceptions

Wed, 29 Aug 2018 18:58:51 +0300Fix non-usable toolbar on wxPython with GTK3+ in PLCOpenEditor
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 29 Aug 2018 18:58:51 +0300] rev 2302
Fix non-usable toolbar on wxPython with GTK3+ in PLCOpenEditor

this problem is related to 'Fix non-usable toolbar on wxPython with
GTK3+' (5927710b). This problem does not happen in Beremiz because
additional necessary self.AUIManager.Update() is called
BeremizIDE. Therefore minimal change in the mentioned commit was
enough for Beremiz, but is not enough for PLCOpenEditor.

Wed, 29 Aug 2018 18:53:02 +0300Avoid usage of localized strings before initialization during import in many modules
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 29 Aug 2018 18:53:02 +0300] rev 2301
Avoid usage of localized strings before initialization during import in many modules

This happens if import is done before i18n setup
(InstallLocalRessources()).
This affects PLCOpenEditor mostly. Beremiz IDE is free from this issue, but moving
initialization from import should make modules more robust.
Otherwise execution result depends on where and when import was done
and this is not a good thing.

Some modules (ConfigTreeNode, features, CodeFileEditor related
classes) still have this, but they are used only in Beremiz.
Most problems result in non-working internatialization.
In some cases (VariablePanel) there is backtrace, because localized
key is not found in non-localized dictionary.

Tue, 28 Aug 2018 18:06:30 +0300Remove executable bit from source files where it's not needed.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 28 Aug 2018 18:06:30 +0300] rev 2300
Remove executable bit from source files where it's not needed.

Tue, 28 Aug 2018 17:19:13 +0300Avoid dictionary initialization during import in PouDialog
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 28 Aug 2018 17:19:13 +0300] rev 2299
Avoid dictionary initialization during import in PouDialog

Because initialization happened before i18n setup, then it causes later
problems during creating new POU on non-English locales (Russian for example).

Traceback (most recent call last):
File "/home/developer/WorkData/PLC/beremiz/beremiz/IDEFrame.py", line 2332, in OnAddPouMenu
dialog = PouDialog(self, pou_type, type_readonly)
File "/home/developer/WorkData/PLC/beremiz/beremiz/dialogs/PouDialog.py", line 101, in __init__
self.RefreshLanguage()
File "/home/developer/WorkData/PLC/beremiz/beremiz/dialogs/PouDialog.py", line 154, in RefreshLanguage
if language != "SFC" or PouDialog.POU_TYPES_DICT[self.PouType.GetStringSelection()] != "function":
KeyError: u'\u043f\u0440\u043e\u0433\u0440\u0430\u043c\u043c\u0430'

Mon, 27 Aug 2018 12:06:24 +0300Increase size of comment block in WAMP example, so all information is visible
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 27 Aug 2018 12:06:24 +0300] rev 2298
Increase size of comment block in WAMP example, so all information is visible

Fri, 24 Aug 2018 13:41:43 +0300Proper fix for error 'object has no attribute 'getSlave' in EtherCAT extension
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 24 Aug 2018 13:41:43 +0300] rev 2297
Proper fix for error 'object has no attribute 'getSlave' in EtherCAT extension

traceback:
File "/home/developer/WorkData/PLC/beremiz/beremiz/IDEFrame.py", line 1433, in OnPouSelectedChanged
window.RefreshView()
File "/home/developer/WorkData/PLC/beremiz/beremiz/etherlab/ConfigEditor.py", line 837, in RefreshView
self.RefreshProcessVariables()
File "/home/developer/WorkData/PLC/beremiz/beremiz/etherlab/ConfigEditor.py", line 886, in RefreshProcessVariables
slaves = self.Controler.GetSlaves(**self.CurrentNodesFilter)
File "/home/developer/WorkData/PLC/beremiz/beremiz/etherlab/EthercatMaster.py", line 341, in GetSlaves
for slave in self.Config.getConfig().getSlave():
<type 'exceptions.AttributeError'>:_'lxml.etree._Element'_object_has_no_attribute_'getSlave'

Steps to reproduce problem:

- Add new EtherCAT master
- Add new EthercatNode to the master
- double click on


Revert commit "Dirty fix for error '_object_has_no_attribute_'getSlave' in EtherCAT extension"
[a3ac46366b86a0b237dac93be6b2281ac70b98a8].

The problem was that XML elements (proxy object) in some cases were created using custom XML
classes constructors and lxml.etree.Element() call and live python
patching. This causes that lxml backend doesn't know that custom python class
should be used for these XML elements.
Proxy object can be move/deleted and recreated by lxml
backend at any point in time or this can be done in python by copy/deepcopy operations.
If this happens, then newly created
proxy elements are using default class lxml.etree._Element. And all
custom functionality is lost.

All created XML elements should be always created through corresponding
parser and class lookup callback done by lxml backend.
It's described in more details in lxml documentation:
https://lxml.de/element_classes.html

Fri, 24 Aug 2018 13:25:05 +0300Make comment blocks in examples slightly bigger so text inside is always visible
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 24 Aug 2018 13:25:05 +0300] rev 2296
Make comment blocks in examples slightly bigger so text inside is always visible

Tue, 21 Aug 2018 13:05:23 +0300Separate application tests and code-style checking in different steps in bitbucket-pipelines
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 21 Aug 2018 13:05:23 +0300] rev 2295
Separate application tests and code-style checking in different steps in bitbucket-pipelines

Mon, 20 Aug 2018 17:11:20 +0300Make Beremiz_service print version information
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 20 Aug 2018 17:11:20 +0300] rev 2294
Make Beremiz_service print version information

Add support for long options '--help' and '--version' as
is recommended by GNU Coding Standards.

Mon, 20 Aug 2018 16:46:50 +0300leave execute permissions only on Beremiz.py, Beremiz_serivce.py and PLCOpenEditor.py
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 20 Aug 2018 16:46:50 +0300] rev 2293
leave execute permissions only on Beremiz.py, Beremiz_serivce.py and PLCOpenEditor.py

Mon, 20 Aug 2018 15:48:06 +0300Update requirements to include WAMP support
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 20 Aug 2018 15:48:06 +0300] rev 2292
Update requirements to include WAMP support

Mon, 20 Aug 2018 15:17:24 +0300Use static library for Modbus
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 20 Aug 2018 15:17:24 +0300] rev 2291
Use static library for Modbus

It makes easier deployment of projects with Modbus (similar to BACnet implementation)

Thu, 16 Aug 2018 16:29:06 +0300Cleanup WAMP example
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 16 Aug 2018 16:29:06 +0300] rev 2290
Cleanup WAMP example

Closes #39

Thu, 16 Aug 2018 13:42:18 +0300Update README for WAMP example to use crossbar with python3
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 16 Aug 2018 13:42:18 +0300] rev 2289
Update README for WAMP example to use crossbar with python3

crossbar python2 support is broken in v18.7.2.
I've submitted with fixes for that.
https://github.com/crossbario/crossbar/pull/1376

But they don't test crossbar with python2 in CI, so it's going to be
broken again in the future.
And there is no much reason to use crossbar with python2.

Thu, 16 Aug 2018 11:01:54 +0300Make ID in WAMP project match with ID PLC runtime.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 16 Aug 2018 11:01:54 +0300] rev 2288
Make ID in WAMP project match with ID PLC runtime.

See project_files/wampconf.json. ID for runtime is "wamptest". The
same id should be used in project's location URI: WAMP://127.0.0.1:8888#Automation#wamptest

Thu, 16 Aug 2018 10:53:54 +0300Fix SetServer method in WAMP
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 16 Aug 2018 10:53:54 +0300] rev 2287
Fix SetServer method in WAMP

Thu, 16 Aug 2018 10:52:20 +0300Remove non-existed PLCObject method 'ForceReload'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 16 Aug 2018 10:52:20 +0300] rev 2286
Remove non-existed PLCObject method 'ForceReload'

Tue, 14 Aug 2018 17:00:01 +0300remote execute permissions from README file
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 14 Aug 2018 17:00:01 +0300] rev 2285
remote execute permissions from README file

Mon, 13 Aug 2018 18:29:07 +0300Fix wxHMI example after upgrading wxGlade
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 13 Aug 2018 18:29:07 +0300] rev 2284
Fix wxHMI example after upgrading wxGlade

Newer wxGlade generates code to initialize GridSizer's with empty
elements.

...
grid_sizer_1.Add(self.window_1, 1, wx.ALIGN_CENTER, 0)
sizer_2.Add((0, 0), 0, 0, 0)
sizer_2.Add((0, 0), 0, 0, 0)
sizer_2.Add((0, 0), 0, 0, 0)
sizer_2.Add((0, 0), 0, 0, 0)
...

That causes following traceback, if new buttons are added
to already full sizer.

PLCobject : Traceback (most recent call last):

File "./Beremiz_service.py", line 389, in default_evaluator
res = (tocall(*args, **kwargs), None)

File "/tmp/tmpQS8ct2/runtime_0.py", line 540, in _runtime_0_start
wx.MessageBox(_("Please stop PLC to close"))

File "/tmp/tmpQS8ct2/runtime_0.py", line 504, in Init
lambda axis:( MakeButtonFunc(self, sizer, axis+"axisMinus"),

File "/tmp/tmpQS8ct2/runtime_0.py", line 502, in <lambda>
lambda btname: MakeButtonFunc(self, sizer, btname), ActionButtons)

File "/tmp/tmpQS8ct2/runtime_0.py", line 461, in MakeButtonFunc
print sizer, btname

File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk3/wx/_core.py", line 14453, in Add
return _core_.Sizer_Add(*args, **kwargs)

PyAssertionError: C++ assertion "Assert failure" failed at
../src/common/sizer.cpp(1401) in DoInsert(): too many items (11 > 2*5)
in grid sizer (maybe you should omit the number of either rows or
columns?)


Tested with wxGlade version 0.8.3
Closes #41

Mon, 13 Aug 2018 18:21:10 +0300Remove useless print statement from wxHMI GUI code
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 13 Aug 2018 18:21:10 +0300] rev 2283
Remove useless print statement from wxHMI GUI code

It's py3k incompatible.

Mon, 13 Aug 2018 18:19:17 +0300Rename extension instance 'wxHMI' to 'wxglade_hmi'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 13 Aug 2018 18:19:17 +0300] rev 2282
Rename extension instance 'wxHMI' to 'wxglade_hmi'

It is necessary because of following commit 7f59aa398669 ('WxGlade HMI extension now does
only instanciate wx object who's name match extension's name. If no
object match the name and no code is provided in 'start' user python
code section, then a warning is issued')

Mon, 13 Aug 2018 18:05:16 +0300Remove backup .bak files
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 13 Aug 2018 18:05:16 +0300] rev 2281
Remove backup .bak files

Mon, 13 Aug 2018 11:33:30 +0300Drop EtherCAT examples, because they are non-functional without releasing motion control library
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 13 Aug 2018 11:33:30 +0300] rev 2280
Drop EtherCAT examples, because they are non-functional without releasing motion control library

Closes #38

Fri, 10 Aug 2018 18:07:38 +0300merge
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 10 Aug 2018 18:07:38 +0300] rev 2279
merge

Fri, 10 Aug 2018 17:45:33 +0300Dirty fix for error '_object_has_no_attribute_'getSlave' in EtherCAT extension
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 10 Aug 2018 17:45:33 +0300] rev 2278
Dirty fix for error '_object_has_no_attribute_'getSlave' in EtherCAT extension

traceback:
File "/home/developer/WorkData/PLC/beremiz/beremiz/IDEFrame.py", line 1433, in OnPouSelectedChanged
window.RefreshView()
File "/home/developer/WorkData/PLC/beremiz/beremiz/etherlab/ConfigEditor.py", line 837, in RefreshView
self.RefreshProcessVariables()
File "/home/developer/WorkData/PLC/beremiz/beremiz/etherlab/ConfigEditor.py", line 886, in RefreshProcessVariables
slaves = self.Controler.GetSlaves(**self.CurrentNodesFilter)
File "/home/developer/WorkData/PLC/beremiz/beremiz/etherlab/EthercatMaster.py", line 341, in GetSlaves
for slave in self.Config.getConfig().getSlave():
<type 'exceptions.AttributeError'>:_'lxml.etree._Element'_object_has_no_attribute_'getSlave'

Steps to reproduce problem:

- Add new EtherCAT master
- Add new EthercatNode to the master
- double click on


this is looks like dirty hack to fix strange problem with initial[0]
changing its type after returning from _init_ method to lxml.etree._Element
As a result all methods generated by class factory are lost.

For example, in function initMethod initial[0].__class__ points to
xmlclass.xmlclass.Config. After map(self.append, initial)
self.Config.__class__ is 'xmlclass.xmlclass.Config' as well.
But after returning from initMethod (_init) in CreateElement
self.Config.__class__ has changed to lxml.etree._Element.


I've noticed similar behavior if copy/deepcopy is used for any child
of etree.ElementBase. See simple example below.
[-------------------------------------------------------------]
#!/usr/bin/python

from __future__ import print_function
from lxml import etree
import copy

class DefaultElementClass(etree.ElementBase):
def getLocalTag(self):
return etree.QName(self.tag).localname


def printInformation(x):
print(x, x.__class__, "getLocalTag" in dir(x))


a = DefaultElementClass()
printInformation(a)

#
printInformation(copy.copy(a))
printInformation(copy.deepcopy(a))
[-------------------------------------------------------------]

Fri, 10 Aug 2018 15:58:40 +0300Fix wrong ST code generation in case of several coils connected to each other.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 10 Aug 2018 15:58:40 +0300] rev 2277
Fix wrong ST code generation in case of several coils connected to each other.


For example,
|---|Var0|----(Var1)--(Var2)---|

Closes #32

Thu, 09 Aug 2018 14:00:14 +0300Update README with instruction to build BACnet library for BACnet support
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 09 Aug 2018 14:00:14 +0300] rev 2276
Update README with instruction to build BACnet library for BACnet support

Thu, 09 Aug 2018 13:58:47 +0300Improve fix wrong code generation if EN/ENO are used in FBD/LD/SFC
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 09 Aug 2018 13:58:47 +0300] rev 2275
Improve fix wrong code generation if EN/ENO are used in FBD/LD/SFC

Commit c9915bc6 "Fix wrong code generation if EN/ENO are used in
FBD/LD/SFC" caused following backtrace in some cases:

File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 476, in GenerateProgram
self.GeneratePouProgram(pou_name)
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 258, in GeneratePouProgram
program = pou_program.GenerateProgram(pou)
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 1713, in GenerateProgram
self.ComputeProgram(pou)
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 997, in ComputeProgram
eno_var = self.GetUsedEno(body, connections)
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 929, in GetUsedEno
for invar in blk.inputVariables.getvariable():
File "/home/developer/WorkData/PLC/beremiz/beremiz/xmlclass/xmlclass.py", line 1363, in getattrMethod
return DefaultElementClass.__getattribute__(self, name)
<type 'exceptions.AttributeError'>: 'inOutVariable' object has no attribute 'inputVariables'

Wed, 01 Aug 2018 14:09:12 +0300Load images for EtherCAT extension
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 01 Aug 2018 14:09:12 +0300] rev 2274
Load images for EtherCAT extension

Fixes following backtrace:

Traceback (most recent call last):
File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk3/wx/_core.py", line 16765, in <lambda>
lambda event: event.callable(*event.args, **event.kw) )
File "/home/developer/WorkData/PLC/beremiz/beremiz/BeremizIDE.py", line 1074, in AddConfNode
self._Refresh(TITLE, FILEMENU, PROJECTTREE)
File "/home/developer/WorkData/PLC/beremiz/beremiz/IDEFrame.py", line 917, in _Refresh
self.RefreshFunctions[element]()
File "/home/developer/WorkData/PLC/beremiz/beremiz/IDEFrame.py", line 1526, in RefreshProjectTree
self.GenerateProjectTreeBranch(root, infos)
File "/home/developer/WorkData/PLC/beremiz/beremiz/IDEFrame.py", line 1565, in GenerateProjectTreeBranch
self.GenerateProjectTreeBranch(item, values)
File "/home/developer/WorkData/PLC/beremiz/beremiz/IDEFrame.py", line 1554, in GenerateProjectTreeBranch
self.TreeImageDict[icon_name] = self.TreeImageList.Add(GetBitmap(icon_name))
File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk3/wx/_gdi.py", line 6735, in Add
return _gdi_.ImageList_Add(*args, **kwargs)
ValueError: invalid null reference in method 'ImageList_Add', expected argument 2 of type 'wxBitmap const &

Wed, 12 Sep 2018 11:36:50 +0200Flush standard output when runtime ready, so that IDE knows it, and can continue connection to LOCAL:// uri
Edouard Tisserant [Wed, 12 Sep 2018 11:36:50 +0200] rev 2273
Flush standard output when runtime ready, so that IDE knows it, and can continue connection to LOCAL:// uri

Tue, 11 Sep 2018 16:08:21 +0200Change behaviour of python_eval function block : if TRIG is false, then ACK is also false except a pulse precisely when receiving answer from interpreter
Edouard Tisserant [Tue, 11 Sep 2018 16:08:21 +0200] rev 2272
Change behaviour of python_eval function block : if TRIG is false, then ACK is also false except a pulse precisely when receiving answer from interpreter

Wed, 05 Sep 2018 12:58:41 +0200Removed useless condition in Worker.py that was allowing misfit non-serialized call when worker still not running its loop.
Edouard Tisserant [Wed, 05 Sep 2018 12:58:41 +0200] rev 2271
Removed useless condition in Worker.py that was allowing misfit non-serialized call when worker still not running its loop.

Tue, 21 Aug 2018 16:11:02 +0200Refactoring. Separated PLC Object, PYRO Server and MainWorker :
Edouard Tisserant [Tue, 21 Aug 2018 16:11:02 +0200] rev 2270
Refactoring. Separated PLC Object, PYRO Server and MainWorker :
- PLC Object is now a Singleton, instantiated through runtime.CreatePLCObjectSingleton(...)
- Pyro server doesn't hold any reference to PLCObject, and doesn't create it anymore
- PLC Object class doesn't inherit from Pyro.ObjBase anymore
- Pyro related code moved to runtime.PyroServer.py
- MainWorker class moved to runtime/Worker.py
- Both PLC Object and MainWorker creation happens in runtime/__init__.py

Thu, 16 Aug 2018 11:22:40 +0200Fixed new code-generation code, that was making exception with simple variable-to-variable assignments.
Edouard Tisserant [Thu, 16 Aug 2018 11:22:40 +0200] rev 2269
Fixed new code-generation code, that was making exception with simple variable-to-variable assignments.

Tue, 14 Aug 2018 13:10:15 +0200BACnet : Fixed missing header include in server.c introduced in 37ef7a3c6b8b
Edouard Tisserant [Tue, 14 Aug 2018 13:10:15 +0200] rev 2268
BACnet : Fixed missing header include in server.c introduced in 37ef7a3c6b8b

Tue, 14 Aug 2018 12:43:43 +0200merged
Edouard Tisserant [Tue, 14 Aug 2018 12:43:43 +0200] rev 2267
merged

Tue, 14 Aug 2018 11:14:20 +0200NevowServer : Added minimalist css style customization and a link to go to settings page and back
dporopat <denis.poropat@smarteh.si> [Tue, 14 Aug 2018 11:14:20 +0200] rev 2266
NevowServer : Added minimalist css style customization and a link to go to settings page and back

Mon, 13 Aug 2018 15:00:51 +0200fixed setServer call in WampClient module. Was doing nothing because _PySrv wasn't global.
Edouard Tisserant [Mon, 13 Aug 2018 15:00:51 +0200] rev 2265
fixed setServer call in WampClient module. Was doing nothing because _PySrv wasn't global.

Mon, 13 Aug 2018 14:58:59 +0200Removed now deprecated ForceReload from WAMP exposed calls
Edouard Tisserant [Mon, 13 Aug 2018 14:58:59 +0200] rev 2264
Removed now deprecated ForceReload from WAMP exposed calls

Mon, 13 Aug 2018 13:24:48 +0200fixed documentation bug
Edouard Tisserant [Mon, 13 Aug 2018 13:24:48 +0200] rev 2263
fixed documentation bug

Mon, 13 Aug 2018 13:24:28 +0200NevowServer : added addInfoString to allow extensions to declare some read-only strings to be displayed in settings. Also renamed addExtension in addSettings for clarity.
Edouard Tisserant [Mon, 13 Aug 2018 13:24:28 +0200] rev 2262
NevowServer : added addInfoString to allow extensions to declare some read-only strings to be displayed in settings. Also renamed addExtension in addSettings for clarity.

Mon, 13 Aug 2018 11:10:23 +0200fixed problems reported by certification testing : vendor identifier acces rights (now read only), and bvlc_maintenance timer was increasing too fast.
Mario de Sousa <msousa@fe.up.pt> [Mon, 13 Aug 2018 11:10:23 +0200] rev 2261
fixed problems reported by certification testing : vendor identifier acces rights (now read only), and bvlc_maintenance timer was increasing too fast.

Thu, 09 Aug 2018 09:07:09 +0200Some blank lines to make bitbucket's PEP8 2.2.0 happy
Edouard Tisserant [Thu, 09 Aug 2018 09:07:09 +0200] rev 2260
Some blank lines to make bitbucket's PEP8 2.2.0 happy

Wed, 08 Aug 2018 13:46:19 +0200merged Andrey's default
Edouard Tisserant [Wed, 08 Aug 2018 13:46:19 +0200] rev 2259
merged Andrey's default

Wed, 01 Aug 2018 13:09:45 +0300Fix wrong code generation if EN/ENO are used in FBD/LD/SFC
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 01 Aug 2018 13:09:45 +0300] rev 2258
Fix wrong code generation if EN/ENO are used in FBD/LD/SFC

This problem appears for example here

--------
------- | MOVE |
| MOVE1 |------|EN ENO|
------- | |
| |
------- | | -----------
| 23 |------|IN OUT|---| LocalVar0 |
------- -------- -----------


--------
------- | MOVE |
| MOVE2 |------|EN ENO|
------- | |
| |
------- | | -----------
| 15 |------|IN OUT|---| LocalVar0 |
------- -------- -----------

Before wrong code was generated for this case:

MOVE6_OUT := MOVE(EN := move1, IN := 23, ENO => MOVE6_ENO);
LocalVar0 := MOVE6_OUT;
MOVE4_OUT := MOVE(EN := move2, IN := 15, ENO => MOVE4_ENO);
LocalVar0 := MOVE4_OUT;

With this patch now following code is generated:

MOVE6_OUT := MOVE(EN := move1, IN := 23, ENO => MOVE6_ENO);
IF MOVE6_ENO THEN
LocalVar0 := MOVE6_OUT;
END_IF;
MOVE4_OUT := MOVE(EN := move2, IN := 15, ENO => MOVE4_ENO);
IF MOVE4_ENO THEN
LocalVar0 := MOVE4_OUT;
END_IF;


See discussion here:
https://sourceforge.net/p/beremiz/mailman/message/36378805/

Tue, 31 Jul 2018 14:17:41 +0300Fix flickering in debug panel
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 31 Jul 2018 14:17:41 +0300] rev 2257
Fix flickering in debug panel

This flickering made debug panel unusable, because most of the time
panel was white. This problem effects wxPython with GTK3+ backend
(at least on GNU/Linux systems).

Removed code IIUC draws box with content of moved debug variable, I
don't see any effect of it neither on GNU/Linux nor on Windows. It
should be safe to remove.

Mon, 30 Jul 2018 19:28:39 +0300Fix non-usable toolbar on wxPython with GTK3+
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 30 Jul 2018 19:28:39 +0300] rev 2256
Fix non-usable toolbar on wxPython with GTK3+

On GNU/Linux if wxPython uses wxWidget with GTK3+ backend (this is
what most modern distributions do), then size of EditorToolBar was
always to store only one button.
This is because GetBestSize() is updated only after pane is shown and
updated.
The code does work correctly on python-wxgtk3.0 (gtk2 backend) on
GNU/Linux and with wxpython 2.8 on Windows.

Mon, 30 Jul 2018 19:02:36 +0300Fix problem with decreasing size of StatusToolBar when tools are removed from toolbar.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 30 Jul 2018 19:02:36 +0300] rev 2255
Fix problem with decreasing size of StatusToolBar when tools are removed from toolbar.

StatusToolBar - toolbar with tool to build, clear, connect, ...
This problem appears only in python-wxgtk3.0. In python-wxgtk2.8 there
was not such problem.

If call StatusToolBar.SetMinSize(wx.DefaultSize), all is working, but
following warning message appears:

(Beremiz.py:15155): Gtk-WARNING **: 18:42:24.115: Negative content
width -6 (allocation 1, extents 4x3) while allocating gadget (node
toolbar, owner GtkToolbar)

To avoid that StatusToolBar.GetToolBitmapSize() is used instead of wx.DefaultSize

Sun, 29 Jul 2018 02:00:03 +0300Add BACnet example
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sun, 29 Jul 2018 02:00:03 +0300] rev 2254
Add BACnet example

Fri, 27 Jul 2018 22:01:10 +0000Rework README.md, add examples section, add instructions for Modbus extension, more information about runtime.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 27 Jul 2018 22:01:10 +0000] rev 2253
Rework README.md, add examples section, add instructions for Modbus extension, more information about runtime.

Fri, 27 Jul 2018 15:44:20 +0300Add Modbus example
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 27 Jul 2018 15:44:20 +0300] rev 2252
Add Modbus example

Wed, 08 Aug 2018 13:27:44 +0200Disable source quality checking on ethercat plugin - will fix it later
Edouard Tisserant [Wed, 08 Aug 2018 13:27:44 +0200] rev 2251
Disable source quality checking on ethercat plugin - will fix it later

Wed, 08 Aug 2018 13:26:48 +0200Passed bacnet*.py through autopep8, and attemped to fix manually what went wrong + fixed pylint complains
Edouard Tisserant [Wed, 08 Aug 2018 13:26:48 +0200] rev 2250
Passed bacnet*.py through autopep8, and attemped to fix manually what went wrong + fixed pylint complains

Wed, 08 Aug 2018 10:17:19 +0200More pylint+pep8 conformance
Edouard Tisserant [Wed, 08 Aug 2018 10:17:19 +0200] rev 2249
More pylint+pep8 conformance

Wed, 08 Aug 2018 10:15:51 +0200autopep8 + hand made fixes on ProjectController.py runtime/WampClient.py wxglade_hmi/wxglade_hmi.py
Edouard Tisserant [Wed, 08 Aug 2018 10:15:51 +0200] rev 2248
autopep8 + hand made fixes on ProjectController.py runtime/WampClient.py wxglade_hmi/wxglade_hmi.py

Tue, 07 Aug 2018 13:35:28 +0200pylint on runtime/NevowServer.py
Edouard Tisserant [Tue, 07 Aug 2018 13:35:28 +0200] rev 2247
pylint on runtime/NevowServer.py

Mon, 06 Aug 2018 15:36:09 +0200pep8 on runtime/NevowServer.py
Edouard Tisserant [Mon, 06 Aug 2018 15:36:09 +0200] rev 2246
pep8 on runtime/NevowServer.py

Mon, 06 Aug 2018 14:30:43 +0200merged
Edouard Tisserant [Mon, 06 Aug 2018 14:30:43 +0200] rev 2245
merged

Mon, 06 Aug 2018 13:14:50 +0200Make some POU libraries selected by default or not. This changes structure of features.libraries, please check and update your extensions if they use libraries
Edouard Tisserant [Mon, 06 Aug 2018 13:14:50 +0200] rev 2244
Make some POU libraries selected by default or not. This changes structure of features.libraries, please check and update your extensions if they use libraries

Wed, 04 Jul 2018 17:47:38 +0300remove useless code
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 04 Jul 2018 17:47:38 +0300] rev 2243
remove useless code

1. hotkey is already defined in menu string
2. remove duplicated code

Wed, 04 Jul 2018 16:41:02 +0300Add full screen mode (menu and title are hidden)
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 04 Jul 2018 16:41:02 +0300] rev 2242
Add full screen mode (menu and title are hidden)

It's can be switched by pressing Shift-F12 or by clicking button on the toolbar

Tue, 03 Jul 2018 17:09:11 +0300Add information how to make shelve command work with check_source.sh called from hg hook
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 03 Jul 2018 17:09:11 +0300] rev 2241
Add information how to make shelve command work with check_source.sh called from hg hook

and added coresponding flag handling in check_source.sh

Fri, 29 Jun 2018 17:53:57 +0300Automatically increment IEC-location address if copy of the variable is created
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 29 Jun 2018 17:53:57 +0300] rev 2240
Automatically increment IEC-location address if copy of the variable is created

Fri, 29 Jun 2018 15:36:34 +0300Make information about translation to be in unicode
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 29 Jun 2018 15:36:34 +0300] rev 2239
Make information about translation to be in unicode

This is necessary because some translator's names contains non-ASCII
characters and they are not handled properly in about dialog on Windows

Fri, 29 Jun 2018 13:40:11 +0300Take plcopen_icons.svg as source of png icons as well
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 29 Jun 2018 13:40:11 +0300] rev 2238
Take plcopen_icons.svg as source of png icons as well

generate poe.ico from png images of different sizes.

Fri, 29 Jun 2018 13:36:32 +0300Add 256x256 and 64x64 Beremiz icons
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 29 Jun 2018 13:36:32 +0300] rev 2237
Add 256x256 and 64x64 Beremiz icons


remove svg:midPointStop tags from icons.svg, because Inkscape
complained about unsupported tag. It seems that these tags were made
by Adobe Illustrator and aren't supported by any other app.

Fri, 29 Jun 2018 13:30:39 +0300Add PLCOpenEditor icon to plcopen_icons.svg
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 29 Jun 2018 13:30:39 +0300] rev 2236
Add PLCOpenEditor icon to plcopen_icons.svg

add 256x256 size to the icon

Wed, 27 Jun 2018 18:13:31 +0300Fix rounding of thousandths of microseconds in duration editor
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 27 Jun 2018 18:13:31 +0300] rev 2235
Fix rounding of thousandths of microseconds in duration editor

Wed, 27 Jun 2018 17:13:06 +0300Add checking value in microseconds field in duration editor dialog
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 27 Jun 2018 17:13:06 +0300] rev 2234
Add checking value in microseconds field in duration editor dialog

Wed, 27 Jun 2018 13:57:03 +0300Catch 'clipboard already open' errors in editors
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 27 Jun 2018 13:57:03 +0300] rev 2233
Catch 'clipboard already open' errors in editors

Apparently following commits have not fixed the problem completely,
because it still happens (although not so often).

changeset: 2019:b8f795bdfe9f
user: Andrey Skvortsov <andrej.skvortzov@gmail.com>
date: Fri May 25 17:40:29 2018 +0300
summary: fix hangs on mouse selection in case if wxPython uses wxWidgets with GTK3+ support

changeset: 2018:5ce6d08ff2c7
user: Andrey Skvortsov <andrej.skvortzov@gmail.com>
date: Fri May 25 17:23:15 2018 +0300
summary: make clipboard open minimal time as wxPython documentation recommends

Wed, 27 Jun 2018 10:58:45 +0300If task type is changed from 'interrupt' to 'cyclic' init interval with T#20ms.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 27 Jun 2018 10:58:45 +0300] rev 2232
If task type is changed from 'interrupt' to 'cyclic' init interval with T#20ms.

Tue, 26 Jun 2018 18:02:51 +0300Explicitly enable required libraries in test projects
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 26 Jun 2018 18:02:51 +0300] rev 2231
Explicitly enable required libraries in test projects

Tue, 26 Jun 2018 17:46:37 +0300Disable by default unlisted in project beremiz.xml libraries
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 26 Jun 2018 17:46:37 +0300] rev 2230
Disable by default unlisted in project beremiz.xml libraries

Used libraries should be explicitly enabled.

Tue, 26 Jun 2018 17:34:15 +0300Fix 'DoGetTextExtent - invalid DC' error
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 26 Jun 2018 17:34:15 +0300] rev 2229
Fix 'DoGetTextExtent - invalid DC' error

most likely this error happens only on certain wx backends.
GTK3+ on GNU/Linux is apparently one of them.
The problem is described in wxWidgets issue tracker.
http://trac.wxwidgets.org/ticket/12486

[-------------------------------------------------------------------------------------------------------------------]
platform:
Linux-4.16.0-2-rt-amd64-x86_64-with-debian-buster-sid

python-version:
2.7.15

traceback:
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 1605, in DispatchDebugValuesProc
self.CallWeakcallables("__tick__", "NewDataAvailable", debug_ticks)
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 1585, in CallWeakcallables
function(*cargs)
File "/home/developer/WorkData/PLC/beremiz/beremiz/editors/Viewer.py", line 1217, in NewDataAvailable
refresh_rect.Union(element.GetRedrawRect())
File "/home/developer/WorkData/PLC/beremiz/beremiz/graphics/GraphicCommons.py", line 1609, in GetRedrawRect
self.ValueSize = self.Parent.GetMiniTextExtent(self.ComputedValue)
File "/home/developer/WorkData/PLC/beremiz/beremiz/editors/Viewer.py", line 932, in GetMiniTextExtent
return self.MiniTextDC.GetTextExtent(text)
File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk3/wx/_gdi.py", line 4127, in GetTextExtent
return _gdi_.DC_GetTextExtent(*args, **kwargs)
<class 'wx._core.PyAssertionError'>: C++ assertion "m_graphicContext" failed at ../src/common/dcgraph.cpp(1160) in DoGetTextExtent(): wxGCDC(cg)::DoGetTextExtent - invalid DC

wx-platform:
__WXGTK__

wx-version:
3.0.2.0

[-------------------------------------------------------------------------------------------------------------------]

traceback:
File "/home/developer/WorkData/PLC/beremiz/beremiz/controls/LogViewer.py", line 740, in OnMessageToolTipTimer
self.MessageToolTip.SetFont(self.Font)
File "/home/developer/WorkData/PLC/beremiz/beremiz/controls/CustomToolTip.py", line 75, in SetFont
self.RefreshTip()
File "/home/developer/WorkData/PLC/beremiz/beremiz/controls/CustomToolTip.py", line 158, in RefreshTip
self.SetClientSize(self.GetToolTipSize())
File "/home/developer/WorkData/PLC/beremiz/beremiz/controls/CustomToolTip.py", line 145, in GetToolTipSize
w, h = dc.GetTextExtent(line)
File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk3/wx/_gdi.py", line 4127, in GetTextExtent
return _gdi_.DC_GetTextExtent(*args, **kwargs)
<class 'wx._core.PyAssertionError'>: C++ assertion "m_graphicContext" failed at ../src/common/dcgraph.cpp(1160) in DoGetTextExtent(): wxGCDC(cg)::DoGetTextExtent - invalid DC

[-------------------------------------------------------------------------------------------------------------------]

Tue, 26 Jun 2018 14:48:44 +0300Fix size of ProjectDialog used by PLCOpenEditor
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 26 Jun 2018 14:48:44 +0300] rev 2228
Fix size of ProjectDialog used by PLCOpenEditor

Disable scrolling for ProjectDialog, because otherwise very very small
windows is created.
This regression was introduced by 5701225 ("replaced normal panel with scrolled panel under project
properties").

Tue, 26 Jun 2018 10:37:36 +0300Fix some compilation warnings for better ANSI C compliance
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 26 Jun 2018 10:37:36 +0300] rev 2227
Fix some compilation warnings for better ANSI C compliance

Fri, 20 Jul 2018 11:10:42 +0200Customizable columns in VariableTables (i.e. can be monkey patched properly)
Edouard Tisserant [Fri, 20 Jul 2018 11:10:42 +0200] rev 2226
Customizable columns in VariableTables (i.e. can be monkey patched properly)

Fri, 20 Jul 2018 11:05:17 +0200Merged
Edouard Tisserant [Fri, 20 Jul 2018 11:05:17 +0200] rev 2225
Merged

Thu, 19 Jul 2018 13:32:27 +0200Customizable update of toolbar buttons (i.e. 'methods') according to PLCStatus nevow_service_rework
Edouard Tisserant [Thu, 19 Jul 2018 13:32:27 +0200] rev 2224
Customizable update of toolbar buttons (i.e. 'methods') according to PLCStatus

Fri, 13 Jul 2018 09:06:01 +0200Fixed small typo in error message. nevow_service_rework
Edouard Tisserant [Fri, 13 Jul 2018 09:06:01 +0200] rev 2223
Fixed small typo in error message.

Thu, 12 Jul 2018 09:35:09 +0200WAMP : complains about failure to start WAMP only if it was successfully imported. nevow_service_rework
Edouard Tisserant [Thu, 12 Jul 2018 09:35:09 +0200] rev 2222
WAMP : complains about failure to start WAMP only if it was successfully imported.

Wed, 11 Jul 2018 14:32:19 +0200WAMP: now config and secret given in project files always override those given in commandline. Also made extensions web customisations happen before registration of web interface. nevow_service_rework
Edouard Tisserant [Wed, 11 Jul 2018 14:32:19 +0200] rev 2221
WAMP: now config and secret given in project files always override those given in commandline. Also made extensions web customisations happen before registration of web interface.

Tue, 10 Jul 2018 12:54:05 +0200Moved Wamp configuration file selection logic into runtime/wampclient.py. Added Wamp CRA secret file upload and download. Slightly reworked code for config and secret file loading and saving. nevow_service_rework
Edouard Tisserant [Tue, 10 Jul 2018 12:54:05 +0200] rev 2220
Moved Wamp configuration file selection logic into runtime/wampclient.py. Added Wamp CRA secret file upload and download. Slightly reworked code for config and secret file loading and saving.

Tue, 10 Jul 2018 12:51:28 +0200Added a way for extension to register dedicated URL under settings page URL (i.e. /settings/something) nevow_service_rework
Edouard Tisserant [Tue, 10 Jul 2018 12:51:28 +0200] rev 2219
Added a way for extension to register dedicated URL under settings page URL (i.e. /settings/something)

Fri, 06 Jul 2018 15:09:44 +0200Fixed a bit of everything in WAMP, and added web settings for that same extension. nevow_service_rework
Edouard Tisserant [Fri, 06 Jul 2018 15:09:44 +0200] rev 2218
Fixed a bit of everything in WAMP, and added web settings for that same extension.

Fri, 06 Jul 2018 15:07:40 +0200Added some immutable field (platform) in default runtime web setting page, for the example. nevow_service_rework
Edouard Tisserant [Fri, 06 Jul 2018 15:07:40 +0200] rev 2217
Added some immutable field (platform) in default runtime web setting page, for the example.

Fri, 06 Jul 2018 15:05:03 +0200Fix misc typos in exception handling code. nevow_service_rework
Edouard Tisserant [Fri, 06 Jul 2018 15:05:03 +0200] rev 2216
Fix misc typos in exception handling code.

Thu, 05 Jul 2018 13:46:18 +0200Fixed i18n related typo. nevow_service_rework
Edouard Tisserant [Thu, 05 Jul 2018 13:46:18 +0200] rev 2215
Fixed i18n related typo.

Thu, 05 Jul 2018 13:45:24 +0200Fixed typo nevow_service_rework
Edouard Tisserant [Thu, 05 Jul 2018 13:45:24 +0200] rev 2214
Fixed typo

Thu, 05 Jul 2018 13:44:54 +0200Better logging of Nevow Server import in case of exception. nevow_service_rework
Edouard Tisserant [Thu, 05 Jul 2018 13:44:54 +0200] rev 2213
Better logging of Nevow Server import in case of exception.

Thu, 05 Jul 2018 11:11:01 +0200WampClient : Simplified, removed dead code, use exception for handling failures and misconfiguration, check existence of mandatory parameters. nevow_service_rework
Edouard Tisserant [Thu, 05 Jul 2018 11:11:01 +0200] rev 2212
WampClient : Simplified, removed dead code, use exception for handling failures and misconfiguration, check existence of mandatory parameters.

Wed, 04 Jul 2018 14:17:00 +0200Merged #2486, enhancements to WAMP client : auto reconnecting, wamp conf checking and saving, additional attributes for exposed calls, etc nevow_service_rework
Edouard Tisserant [Wed, 04 Jul 2018 14:17:00 +0200] rev 2211
Merged #2486, enhancements to WAMP client : auto reconnecting, wamp conf checking and saving, additional attributes for exposed calls, etc

Wed, 04 Jul 2018 14:10:03 +0200Nevow based web interface now show simple Log message sending form for basic runtime, and allow extensions to add their own web settings. nevow_service_rework
Edouard Tisserant [Wed, 04 Jul 2018 14:10:03 +0200] rev 2210
Nevow based web interface now show simple Log message sending form for basic runtime, and allow extensions to add their own web settings.

Fri, 22 Jun 2018 14:08:34 +0200Now, runtime extensions should be able to add their own settings to web configuration interface. nevow_service_rework
Edouard Tisserant [Fri, 22 Jun 2018 14:08:34 +0200] rev 2209
Now, runtime extensions should be able to add their own settings to web configuration interface.

Fri, 22 Jun 2018 12:43:33 +0200Embrio of setting form, just to test nevow_service_rework
Edouard Tisserant [Fri, 22 Jun 2018 12:43:33 +0200] rev 2208
Embrio of setting form, just to test

Tue, 05 Jun 2018 15:29:58 +0200#2486 Exception if custom protocol options are wrong. #2486
dporopat <denis.poropat@smarteh.si> [Tue, 05 Jun 2018 15:29:58 +0200] rev 2207
#2486 Exception if custom protocol options are wrong.

Fri, 18 May 2018 11:05:49 +0200#2486 ExposedCalls with register options as a dictionary. #2486
dporopat <denis.poropat@smarteh.si> [Fri, 18 May 2018 11:05:49 +0200] rev 2206
#2486 ExposedCalls with register options as a dictionary.

Mon, 14 May 2018 13:05:54 +0200#2486 Renaming functions. #2486
dporopat <denis.poropat@smarteh.si> [Mon, 14 May 2018 13:05:54 +0200] rev 2205
#2486 Renaming functions.

Mon, 14 May 2018 08:45:44 +0200#2486 Reconnect funtion in SaveWampClientConf function. #2486
dporopat <denis.poropat@smarteh.si> [Mon, 14 May 2018 08:45:44 +0200] rev 2204
#2486 Reconnect funtion in SaveWampClientConf function.

Wed, 09 May 2018 09:59:53 +0200#2486 Modified reconnect function. Added 'active' parameter to wampconf.json file. #2486
dporopat <denis.poropat@smarteh.si> [Wed, 09 May 2018 09:59:53 +0200] rev 2203
#2486 Modified reconnect function. Added 'active' parameter to wampconf.json file.

Thu, 19 Apr 2018 13:40:56 +0200#2486 Adding reconnect funtion to WampClient. Global TransportFactory not needed anymore. #2486
dporopat <denis.poropat@smarteh.si> [Thu, 19 Apr 2018 13:40:56 +0200] rev 2202
#2486 Adding reconnect funtion to WampClient. Global TransportFactory not needed anymore.

Wed, 18 Apr 2018 10:42:33 +0200#2486 Added global TransportFactory, needed in WebInterface reconnecting function. #2486
dporopat <denis.poropat@smarteh.si> [Wed, 18 Apr 2018 10:42:33 +0200] rev 2201
#2486 Added global TransportFactory, needed in WebInterface reconnecting function.

Wed, 18 Apr 2018 10:40:16 +0200#2486 WampClient needs pyro.plcobj before registration calls. #2486
dporopat <denis.poropat@smarteh.si> [Wed, 18 Apr 2018 10:40:16 +0200] rev 2200
#2486 WampClient needs pyro.plcobj before registration calls.

Wed, 11 Apr 2018 10:53:48 +0200#2486 Fix if protocol, register options are not present in wapmconf.json file. #2486
dporopat <denis.poropat@smarteh.si> [Wed, 11 Apr 2018 10:53:48 +0200] rev 2199
#2486 Fix if protocol, register options are not present in wapmconf.json file.

Tue, 10 Apr 2018 12:08:23 +0200#2486 Added ExposedProgressCalls list using details argument for registration progress calls. #2486
dporopat <denis.poropat@smarteh.si> [Tue, 10 Apr 2018 12:08:23 +0200] rev 2198
#2486 Added ExposedProgressCalls list using details argument for registration progress calls.

Tue, 10 Apr 2018 10:44:46 +0200#2486 Unnecessary variable removed. #2486
dporopat <denis.poropat@smarteh.si> [Tue, 10 Apr 2018 10:44:46 +0200] rev 2197
#2486 Unnecessary variable removed.

Tue, 10 Apr 2018 09:54:22 +0200#2486 Added option to use websocket register options. Added function getValidOptins to read options from wampconf.json. #2486
dporopat <denis.poropat@smarteh.si> [Tue, 10 Apr 2018 09:54:22 +0200] rev 2196
#2486 Added option to use websocket register options. Added function getValidOptins to read options from wampconf.json.

Mon, 09 Apr 2018 14:38:38 +0200#2486 Added option to use websocket protocol options. #2486
dporopat <denis.poropat@smarteh.si> [Mon, 09 Apr 2018 14:38:38 +0200] rev 2195
#2486 Added option to use websocket protocol options.

Tue, 27 Mar 2018 10:11:04 +0200#2486 Updated wamp test project to work with the latest Crossbar version. #2486
dporopat <denis.poropat@smarteh.si> [Tue, 27 Mar 2018 10:11:04 +0200] rev 2194
#2486 Updated wamp test project to work with the latest Crossbar version.

Mon, 19 Mar 2018 12:18:07 +0100#2486 Reset delay function added. It resets the delay and the retry counter on reconnect. #2486
dporopat <denis.poropat@smarteh.si> [Mon, 19 Mar 2018 12:18:07 +0100] rev 2193
#2486 Reset delay function added. It resets the delay and the retry counter on reconnect.

Sat, 23 Jun 2018 09:17:20 +0200merge
Edouard Tisserant <edouard.tisserant@gmail.com> [Sat, 23 Jun 2018 09:17:20 +0200] rev 2192
merge

Sat, 23 Jun 2018 09:16:35 +0200merge
Edouard Tisserant <edouard.tisserant@gmail.com> [Sat, 23 Jun 2018 09:16:35 +0200] rev 2191
merge

Mon, 18 Jun 2018 12:17:07 +0300Fix compilation warning/error: comparison between signed and unsigned integer expressions [-Werror=sign-compare]
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 18 Jun 2018 12:17:07 +0300] rev 2190
Fix compilation warning/error: comparison between signed and unsigned integer expressions [-Werror=sign-compare]

Mon, 18 Jun 2018 12:12:57 +0300merge
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 18 Jun 2018 12:12:57 +0300] rev 2189
merge

Fri, 15 Jun 2018 09:48:05 +0200WxGlade HMI extension now does only instanciate wx object who's name match extension's name. If no object match the name and no code is provided in 'start' user python code section, then a warning is issued
Edouard Tisserant [Fri, 15 Jun 2018 09:48:05 +0200] rev 2188
WxGlade HMI extension now does only instanciate wx object who's name match extension's name. If no object match the name and no code is provided in 'start' user python code section, then a warning is issued

Wed, 13 Jun 2018 08:54:13 +0200BACnet : ensure that Init did happen before continuing with PLC startup.
Edouard Tisserant [Wed, 13 Jun 2018 08:54:13 +0200] rev 2187
BACnet : ensure that Init did happen before continuing with PLC startup.

Fri, 15 Jun 2018 16:41:55 +0300Update list of files with strings for i18n and templates for translations
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 15 Jun 2018 16:41:55 +0300] rev 2186
Update list of files with strings for i18n and templates for translations

Fri, 15 Jun 2018 16:30:06 +0300Add small contributing document with information about codestyle checking
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 15 Jun 2018 16:30:06 +0300] rev 2185
Add small contributing document with information about codestyle checking