2010-06-04Fixed PLC status bytes values
Lolitech [Fri, 04 Jun 2010 14:58:03 +0200] rev 554
Fixed PLC status bytes values

2010-06-04Move init code from variable to module
laurent [Fri, 04 Jun 2010 13:47:02 +0200] rev 553
Move init code from variable to module

2010-06-04Bug with recv from socket fixed
laurent [Fri, 04 Jun 2010 13:09:35 +0200] rev 552
Bug with recv from socket fixed

2010-06-04Adding support for command line communication by socket instead of stdin/stdout
laurent [Fri, 04 Jun 2010 11:27:00 +0200] rev 551
Adding support for command line communication by socket instead of stdin/stdout

2010-06-04Adding support for initialize all LPC module variables even if not used
laurent [Fri, 04 Jun 2010 09:02:22 +0200] rev 550
Adding support for initialize all LPC module variables even if not used

2010-06-03Fixed bug on frame close.
Lolitech [Thu, 03 Jun 2010 17:26:47 +0200] rev 549
Fixed bug on frame close.

2010-06-03Some fixes in LPCApp{Obj,Proto}, to be continued.
Lolitech [Thu, 03 Jun 2010 17:23:11 +0200] rev 548
Some fixes in LPCApp{Obj,Proto}, to be continued.

2010-06-03Reorganization of threading for command line and wx main loops. Commands are now cleanly serialized through calls to wx.CallAfter. wx mainloop now runs on main thread.
Lolitech [Thu, 03 Jun 2010 17:21:40 +0200] rev 547
Reorganization of threading for command line and wx main loops. Commands are now cleanly serialized through calls to wx.CallAfter. wx mainloop now runs on main thread.

2010-06-03Safer passing of PLC ID to make command line.
Lolitech [Thu, 03 Jun 2010 17:17:51 +0200] rev 546
Safer passing of PLC ID to make command line.

2010-06-03Refactored LPC connector for new bootloader and application modes
Lolitech [Thu, 03 Jun 2010 12:57:28 +0200] rev 545
Refactored LPC connector for new bootloader and application modes

2010-06-03Removed boring PLC/build compare messages.
Lolitech [Thu, 03 Jun 2010 12:56:21 +0200] rev 544
Removed boring PLC/build compare messages.

2010-06-03Disabled boring standard conformance checks, fixed possible race condition with StatusTimer, fixed warning message in AbortTransfer
Lolitech [Thu, 03 Jun 2010 12:54:45 +0200] rev 543
Disabled boring standard conformance checks, fixed possible race condition with StatusTimer, fixed warning message in AbortTransfer

2010-06-02changes merged
laurent [Wed, 02 Jun 2010 16:53:38 +0200] rev 542
changes merged

2010-06-02Adding compile button when unconnected
laurent [Wed, 02 Jun 2010 16:52:58 +0200] rev 541
Adding compile button when unconnected

2010-06-02Overloaded GetBinaryCode in LPC connector returns ready to send over serial binary
Lolitech [Wed, 02 Jun 2010 16:40:06 +0200] rev 540
Overloaded GetBinaryCode in LPC connector returns ready to send over serial binary

2010-06-02Modifying LPCBeremiz to launch silently a frame and show or hide it on demand.
laurent [Wed, 02 Jun 2010 16:35:00 +0200] rev 539
Modifying LPCBeremiz to launch silently a frame and show or hide it on demand.
Adding support for transferring LPC programs.

2010-06-02Moved LPC specific code from toolchain_makefile into LPC target, added FROM_BEREMIZ variable to tell LPC's makefile it is invoked from here.
edouard [Wed, 02 Jun 2010 10:08:58 +0200] rev 538
Moved LPC specific code from toolchain_makefile into LPC target, added FROM_BEREMIZ variable to tell LPC's makefile it is invoked from here.

2010-06-01merge
Lolitech@ACER9810.smarteh.local [Tue, 01 Jun 2010 13:08:13 +0200] rev 537
merge

2010-06-01Cosmetix fixes for LPC tests/build
Lolitech [Tue, 01 Jun 2010 11:24:09 +0200] rev 536
Cosmetix fixes for LPC tests/build

2010-06-01merge with forgoten rev
lolitech@ks351503.kimsufi.com [Tue, 01 Jun 2010 10:03:58 +0200] rev 535
merge with forgoten rev

2009-12-16Bug on FileMenu not refreshed when modifications fixed
laurent [Wed, 16 Dec 2009 15:21:17 +0100] rev 534
Bug on FileMenu not refreshed when modifications fixed

2009-12-25Christmas 2009 release
Edouard TISSERANT <edouard.tisserant@gmail.com> [Fri, 25 Dec 2009 13:08:20 +0100] rev 533
Christmas 2009 release

2009-12-23Fixed startin debugger with non empty debug variable list
Edouard TISSERANT <edouard.tisserant@gmail.com> [Wed, 23 Dec 2009 22:23:02 +0100] rev 532
Fixed startin debugger with non empty debug variable list

2009-12-16Changes merged
laurent [Wed, 16 Dec 2009 15:09:12 +0100] rev 531
Changes merged

2009-12-16Bug when trying to generate LPCBus code fixed
laurent [Wed, 16 Dec 2009 15:08:38 +0100] rev 530
Bug when trying to generate LPCBus code fixed

2009-12-16Bug when try to SaveAs on Windows fixed
laurent [Wed, 16 Dec 2009 15:07:47 +0100] rev 529
Bug when try to SaveAs on Windows fixed

2009-12-16merge
Edouard TISSERANT <edouard.tisserant@gmail.com> [Wed, 16 Dec 2009 14:53:36 +0100] rev 528
merge

2009-12-16Changes merged
tkragelj [Wed, 16 Dec 2009 14:13:55 +0100] rev 527
Changes merged

2009-12-16Added flush when printing to standard output.
tkragelj [Wed, 16 Dec 2009 14:12:47 +0100] rev 526
Added flush when printing to standard output.

2009-12-16LPCobject writes PLC info string to stdout, for LPC composer to update
Edouard TISSERANT <edouard.tisserant@gmail.com> [Wed, 16 Dec 2009 14:51:28 +0100] rev 525
LPCobject writes PLC info string to stdout, for LPC composer to update

2009-12-16Update french translation after modifications
laurent [Wed, 16 Dec 2009 13:37:50 +0100] rev 524
Update french translation after modifications

2009-12-16Bug when pyserial not available fixed
laurent [Wed, 16 Dec 2009 13:26:59 +0100] rev 523
Bug when pyserial not available fixed

2009-12-15Adding CheckRetainBuffer into plc_Linux_main.c
laurent [Tue, 15 Dec 2009 20:51:51 +0100] rev 522
Adding CheckRetainBuffer into plc_Linux_main.c

2009-12-15LPC transfer tested, added PLCInfo along MD5 checksum while invoking makefile
edouard [Tue, 15 Dec 2009 18:24:50 +0100] rev 521
LPC transfer tested, added PLCInfo along MD5 checksum while invoking makefile

2009-12-15Fixed typos in LPC connector
edouard [Tue, 15 Dec 2009 16:04:28 +0100] rev 520
Fixed typos in LPC connector

2009-12-15Adding message to standard output to signal when LPCBeremiz is closed
laurent [Tue, 15 Dec 2009 15:39:39 +0100] rev 519
Adding message to standard output to signal when LPCBeremiz is closed

2009-12-15Fixed confusion about __common_ticktime type, redesigned LPC PLC timer support
edouard [Tue, 15 Dec 2009 15:35:02 +0100] rev 518
Fixed confusion about __common_ticktime type, redesigned LPC PLC timer support

2009-12-15Bug when changing LPCBeremiz OnlineMode fixed
laurent [Tue, 15 Dec 2009 14:40:45 +0100] rev 517
Bug when changing LPCBeremiz OnlineMode fixed

2009-12-15Reset connector when disconnected
laurent [Tue, 15 Dec 2009 14:40:18 +0100] rev 516
Reset connector when disconnected

2009-12-15Changes merged
laurent [Tue, 15 Dec 2009 10:06:01 +0100] rev 515
Changes merged

2009-12-15Bug on LPCBeremiz when wxPopen asking for Yield after reopening of a Beremiz window fixed
laurent [Tue, 15 Dec 2009 10:04:33 +0100] rev 514
Bug on LPCBeremiz when wxPopen asking for Yield after reopening of a Beremiz window fixed

2009-12-15Split BottomNoteBook to make LogConsole always visible
laurent [Tue, 15 Dec 2009 10:01:26 +0100] rev 513
Split BottomNoteBook to make LogConsole always visible

2009-12-14Improved CanFEstival support for LPC - now build and link plugin generated files
edouard [Mon, 14 Dec 2009 21:05:10 +0100] rev 512
Improved CanFEstival support for LPC - now build and link plugin generated files

2009-12-14Adding support for hard forcing located output
laurent [Mon, 14 Dec 2009 11:03:59 +0100] rev 511
Adding support for hard forcing located output

2009-12-12Getting default target when no target defined fixed
laurent [Sat, 12 Dec 2009 20:51:56 +0100] rev 510
Getting default target when no target defined fixed

2009-12-12Bug not refreshing FileMenu when saving fixed
laurent [Sat, 12 Dec 2009 20:49:07 +0100] rev 509
Bug not refreshing FileMenu when saving fixed

2009-12-11Revamped LPC connector and toolchain
edouard [Fri, 11 Dec 2009 16:39:20 +0100] rev 508
Revamped LPC connector and toolchain

2009-12-11Bug on testing Retain and Force flags fixed
laurent [Fri, 11 Dec 2009 13:04:22 +0100] rev 507
Bug on testing Retain and Force flags fixed

2009-12-11Adding support for making distinction between external variables and located variables for forcing
laurent [Fri, 11 Dec 2009 13:03:44 +0100] rev 506
Adding support for making distinction between external variables and located variables for forcing

2009-12-11Adding support for refreshing FileMenu after plugin tree modification
laurent [Fri, 11 Dec 2009 13:02:30 +0100] rev 505
Adding support for refreshing FileMenu after plugin tree modification

2009-12-11Fixed debug again, did some code tidying
edouard [Fri, 11 Dec 2009 08:49:32 +0100] rev 504
Fixed debug again, did some code tidying

2009-12-10LPC build and protocol tweaks
edouard [Thu, 10 Dec 2009 17:36:37 +0100] rev 503
LPC build and protocol tweaks

2009-12-10LPC connector - one step further
edouard [Thu, 10 Dec 2009 14:57:27 +0100] rev 502
LPC connector - one step further

2009-12-10Changes merged
laurent [Thu, 10 Dec 2009 12:31:42 +0100] rev 501
Changes merged

2009-12-10Adding support for defining mandatory parameters and creating blank xml file when there is nothing in the folder in LPCBeremiz
laurent [Thu, 10 Dec 2009 12:30:49 +0100] rev 500
Adding support for defining mandatory parameters and creating blank xml file when there is nothing in the folder in LPCBeremiz

2009-12-10Enable Save Menu item according to project modification state
laurent [Thu, 10 Dec 2009 12:29:27 +0100] rev 499
Enable Save Menu item according to project modification state

2009-12-10LPC src directory copy fix
edouard [Thu, 10 Dec 2009 10:13:37 +0100] rev 498
LPC src directory copy fix

2009-12-10Typo in LPC
edouard [Thu, 10 Dec 2009 10:12:28 +0100] rev 497
Typo in LPC

2009-12-10Bug when creating new project after opening Beremiz without project defined fixed
laurent [Thu, 10 Dec 2009 09:39:05 +0100] rev 496
Bug when creating new project after opening Beremiz without project defined fixed

2009-12-10Bug when closing Beremiz without a project opened fixed
laurent [Thu, 10 Dec 2009 09:35:39 +0100] rev 495
Bug when closing Beremiz without a project opened fixed