use pregenerated CRC32 lookup tables for retain on Win32 and GNU/Linux

This code could be possible reused on low-end targets with limited RAM.

code to generate lookup table:
[---------------------------------------------------------------------]

/* CRC lookup table and initial state. */
uint32_t crc32_table[256];

/* Generate CRC32 lookup table. */
void GenerateCRC32Table(void)
{
unsigned int i, j;
/* Use CRC-32-IEEE 802.3 polynomial 0x04C11DB7 (bit reflected). */
uint32_t poly = 0xEDB88320;

for (i = 0; i <= 0xFF; i++)
{
uint32_t c = i;
for (j = 0 ; j < 8 ; j++)
c = (c & 1) ? (c >> 1 ) ^ poly : (c >> 1);
crc32_table[i] = c;
}
}

void main(void)
{
GenerateCRC32Table();
int j=0;
for(int i=0; i<256; i++) {
printf("0x%08X, ", crc32_table[i]);
if (++j >= 8) {
j = 0;
printf("\n");
}
}
}
[---------------------------------------------------------------------]

Merged in masterschlumpf/beremiz/wx3-fix (pull request #37)

Fix an exception with wx-3.0-gtk3 in PLCOpenEditor when generating ST files

Approved-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>

Fix an exception on wx-3.0-gtk3 in PLCOpenEditor when generating ST files.

On Python2.7 with WX3.0 and GTK3, an assertionError rises on generating a ST file if the name is already set. The first generation works without problems, if you generate the file a second one, PLCOpenEditor tries to open the file
save dialog with the pre entered name from last run. Then the following assertion pops up:

PyAssertionError: C++ assertion "volDummy.empty() && pathDummy.empty()" failed at ./src/common/filename.cpp(568) in Assign(): the file name shouldn't contain the path

This fix reduces the filepath of the ST file the to the filename. Now it works fine.

Fix typos in function names

update links to matiec and beremiz repos in README

fix zoom-in/zoom-out using mouse wheel

regression introduced by 2393:235f847be37e "python3 support: pylint, W1619 #(old-division) division w/o __future__ statement"

better pylint complain workaround

check_sources.sh makes me become even less productive

Added stub axis_s type in EtherLAB CiA402 support code, until Motion Contol Library comes back

Allow using one XSD based target description for many targets. Target description XSD can now use %(target_name)s to refer to target name.

Fix previous commit : Using wx.CallAfter shouldn't have been necessary, and was a symptom of failing evaluator's deadlock detection.

Fix startup of wxGlade base HMI. Wx calls were issued from non-wx thread (main).

Reworked chunk based transfer to support duplicated files (i.e. files with same content, but different names)

Fixed deadlock in runtime's Worker. Was discovered while using WAMP and PYRO simultaneously.

Add a debugger token to SetTraceVariables and GetTraceVariables to prevent crash an inconsistant data in case of multiple connections. Last connection now takes over existing connections's debug, and first connected IDE gets a wrning.

Fixed deadlock when using Wx together with Twisted in runtime.

Split IDE's frame OnCloseFrame() into TryCloseFrame() and OnCloseFrame(), to help further customization

fixed exception happening randomly just after showing discovery panel.

fixed exception happening when connecting to empty URI, and set URI through URI Editor Dialog popping up becaue empty.

Merged Mario's modbus fix : Modbus plugin: reset periodic activation timer when overrun occurs (delays due to communication errors, ...)

Modbus plugin: reset periodic activation timer when overrun occurs (delays due to communication errors, ...)

Disable MDNS:// scheme support. Also prevent discovery pannel to produce some. For now it seems that that feature is unused, and could be a security issue.

Added support to PYROS in Zeroconf discovery and publish. For now, PYRO://mdnsname._tcp.local. URI are broken, and discovery panel generate IP based URI by default.

PyroServer: fixed naming of class, and reorganized methods in order to ease subclassing, in case of customization of service publication on the local network (i.e. zeroconf)

Fix exception dialog with non recognized URI schemes

Fixed runtime's reconnecting loop not stopping when re-configuring WAMP.
In case WAMP was already trying to connect without success and user change WAMP configuration through web interface, previous ReconnectingClient wasn't stopped.

Removed nonsense code, that I should have check more in details before merging m(

Allow easier monkey patching of WAMP connector Session class

Expose new PLCObject API members to WAMP interface.

Use another way to ensure compatibility with Py3 about text type.

Make easier to read console error message in case of connection problem.

PYRO(S): Added timeout on client side to allow unfreezing IDE after some time when communication with target dropped

Enure that autostart blocks other @RunInMain PLCObject methods, and _unblocks_ them once autostart is done...

Fixed Discovery panel in URI Editor dialog : double click works back again, and avoid setting URI to unicode type.

Bigger chunks, from 16k to 1M

Empirically reverted calls done just after NewPLC back to the order as it was before chunked transfer. Apparently I broke something... To be continued

Chunk based transfer for PLC binary and extra files, and some collateral code refactoring.

Fix failing PLC build when building freshly created project that use default libraries blocks. When controller loads libraries according to attibutes in project files (BeremizRoot/Enable_{libname}_Library), use known default if attribute is missing.

Cosmetic change in PSKManagement.py

Fixed ID,last URI, or last connection date not being updated when connnecting to target.

Merged. Some changes that should already have been incuded during previous merge (mostly about PlcStatus) have been included this time.

IDManager : small cosmetic fixes and cleanup.

python3 support: pylint, W1633 # (round-builtin) round built-in referenced

because round behavior is changed to default behavior in Python3
(Banker round). It can cause slight differences in some cases.
Mostly graphical editors are affected, there could be single pixel differences.
Now I couldn't locate any visual differences in test programs.

python3 support: pylint,W1610 # (reduce-builtin) reduce built-in referenced

python3 support: pylint, W1653 # (next-method-defined) next method defined

python3 support: pylint, W1622 # (next-method-called) Called a next() method on an object

python3 support: pylint, W1625 # (raising-string) Raising a string exception

python3 support: pylint, W1624 # (indexing-exception) Indexing exceptions will not work on Python 3

python3 support: pylint, W1611 # (standarderror-builtin) StandardError built-in referenced

python3 support: pylint, W1652 # (deprecated-types-field) Accessing a deprecated fields on the types module

python3 support: pylint, W1651 (deprecated-itertools-function) Accessing a deprecated function on the itertools module

It's even 20% faster, than previous code. On python3 zip is even much more faster.

python3 support: pylint, W1649 # (deprecated-string-function) Accessing a deprecated function on the string module

python3 support: pylint, W1645 # (exception-message-attribute) Exception.message removed in Python 3

python3 support: pylint, W1646 # (invalid-str-codec) non-text encoding used in str.decode

python3 support: pylint,W1602 # (basestring-builtin) basestring built-in referenced

python3 support: pylint, W1629 # (nonzero-method) __nonzero__ method defined

python3 support: pylint, W1606 # (execfile-builtin) execfile built-in referenced

python3 support: pylint, W1607 # (file-builtin) file built-in referenced

python3 support: pylint, W1659 # (xreadlines-attribute) Accessing a removed xreadlines attribute

python3 support: pylint, W1601 # (apply-builtin) apply built-in referenced

Fix pep8 warning: W605 invalid escape sequence ?x?

pep8, ignore W606 'async' and 'await' are reserved keywords starting with Python 3.7

This error exists in pyjs extension, but pyjs isn't going to Python3.
'noqa' isn't working for W606, so this warning is disabled completely.
'async' and 'await' are still checked by pylint.

python3 support: pylint, W1619 #(old-division) division w/o __future__ statement

Make easier to run pytest on local X-server

cleanup pyc files between running pytest

this is need to avoid problem sometimes tests are run inside docker
container and sometimes local.

Traceback (most recent call last):
File "/usr/lib/python2.7/dist-packages/_pytest/config/__init__.py", line 409, in _importconftest
mod = conftestpath.pyimport()
File "/usr/lib/python2.7/dist-packages/py/_path/local.py", line 686, in pyimport
raise self.ImportMismatchError(modname, modfile, self)
ImportMismatchError: ('conftest', '/beremiz/tests/tools/conftest.py', local('/home/developer/beremiz/tests/tools/conftest.py'))
ERROR: could not load /home/developer/beremiz/tests/tools/conftest.py

python3 support: pylint, W1612 # (unicode-builtin) unicode built-in referenced

Use multiple processes to speed up pylint

0 will auto-detect the number of processors available to use.
version 1.6.5 (Debian 9.5) hangs for some reason in multi-process mode.

python3 support: pylint, W1613 # (xrange-builtin) xrange built-in referenced

python3 support: pylint, W1648 # (bad-python3-import) Module moved in Python 3

Fixed regression in connecting to LOCAL:// targets

Merge, with surprizingly little conflicts

IDManager : finished Import/Export. Added merging capability to import (asks if particular ID is replaced during import). Added ESC as closing shortcut to IDManager dialog, and adjusted its size.

merge

Update localization template

Fix 'msgid' format string with unnamed arguments cannot be properly localized

Add automatic check for localization strings with multiple unnamed arguments

Improve localization support in etherlab (mostly)

cleanup etherlab: pylint, W0602 (global-variable-not-assigned) Using global for 'X' but no assignment is done

cleanup: pylint, W0109 # (duplicate-key) Duplicate key 'X' in dictionary

Add python3 syntax checking to CI

Fix old style exception raise and exec syntax

Use python 3 compatible exception syntax everywhere

cleanup: pylint, R0123 # (literal-comparison) Comparison to literal

Use predefined constants for PlcStatus instead of string literals

cleanup: pylint, R1704 # (redefined-argument-from-local) Redefining argument with the local name 'Y'

cleanup: pylint, R1701 # (consider-merging-isinstance) Consider merging these isinstance calls to isinstance(CTNLDFLAGS, (str, unicode))

cleanup: pylint, E1304 # (missing-format-string-key) Missing key 'X_name' in format string dictionary

cleanup: pylint, E1300 # (bad-format-character) Unsupported format character '"' (0x22) at index 17

cleanup: pylint, W0111 # (assign-to-new-keyword) Name async will become a keyword in Python 3.7

cleanup: pylint, E1310 (bad-str-strip-call) Suspicious argument in str.strip call

Fix segmentation fault when last lines in text POUs should be highlighted

enable etherlab checks

resort enabled pylint check to move likely-most invasive changes to the end

clean etherlab: pylint, C0330 # (bad-continuation) Wrong hanging indentation before block

clean etherlab: pylint, W0612 # (unused-variable) Unused variable 'X'

clean etherlab: pylint, W1618 # (no-absolute-import) import missing `from __future__ import absolute_import`

clean etherlab: pylint,E0602 # (undefined-variable) Undefined variable 'X'

clean etherlab: pylint, E1136 # (unsubscriptable-object) Value 'X' is unsubscriptable

ignore missing MotionLibrary

to fix pylint error 'E0401 # (import-error) Unable to import 'X'

clean etherlab: pylint, E0611 # (no-name-in-module) No name 'X' in module 'Y'

clean etherlab: pylint, C0123 # (unidiomatic-typecheck) Using type() instead of isinstance() for a typecheck.

clean etherlab: pylint, W0104 # (pointless-statement) Statement seems to have no effect

clean etherlab: pylint, W0631 # (undefined-loop-variable) Using possibly undefined loop variable 'X'

clean etherlab: pylint, C1001 # (old-style-class) Old-style class defined.

clean etherlab: pylint, W0611 # (unused-import) Unused import X

clean etherlab: pylint, E0102 # (function-redefined) method already defined

clean etherlab: pylint, W0105 # (pointless-string-statement) String statement has no effect

clean etherlab: pylint,W0231 # (super-init-not-called) __init__ method from base class is not called

clean etherlab: pylint, C0412 # (ungrouped-imports) Imports from package X are not grouped

clean etherlab: pylint,W0108 # (unnecessary-lambda) Lambda may not be necessary

clean etherlab: pylint, C0411 # (wrong-import-order) standard import "import x" comes before "import y"

clean etherlab: pylint, W0404 # reimported module

check_source.sh: add E301 check to the list of selected PEP8 errors

clean etherlab: pep8, E301 expected 2 blank lines, found 1

clean etherlab: pep8, W503 line break before binary operator

clean etherlab: pep8, E266 too many leading '#' for block comment

clean etherlab: pep8, E122 continuation line missing indentation or outdented

clean etherlab: pep8, W191 indentation contains tabs

clean etherlab: pep8, E211 whitespace before '['

clean etherlab: pep8, E129 visually indented line with same indent as next logical line

clean etherlab: pep8, E127 continuation line over-indented for visual indent