Thu, 17 Feb 2011 17:34:29 +0100Removed status polling for LPC, as status cannot change by itself, fixed MD5 comparison in app mode
edouard [Thu, 17 Feb 2011 17:34:29 +0100] rev 575
Removed status polling for LPC, as status cannot change by itself, fixed MD5 comparison in app mode

Thu, 17 Feb 2011 17:04:10 +0100Prevent status polling to generate an error while PLC is being reset to bootloader mode
edouard [Thu, 17 Feb 2011 17:04:10 +0100] rev 574
Prevent status polling to generate an error while PLC is being reset to bootloader mode

Thu, 17 Feb 2011 16:38:42 +0100Fixed MD5 computation for makefile based toolchain, helps avoiding unnecessary builds - continued
edouard [Thu, 17 Feb 2011 16:38:42 +0100] rev 573
Fixed MD5 computation for makefile based toolchain, helps avoiding unnecessary builds - continued

Thu, 17 Feb 2011 15:59:56 +0100Fixed MD5 computation for makefile based toolchain, helps avoiding unnecessary builds
edouard [Thu, 17 Feb 2011 15:59:56 +0100] rev 572
Fixed MD5 computation for makefile based toolchain, helps avoiding unnecessary builds

Thu, 17 Feb 2011 10:11:04 +0100Debug switch (file in CWD). LPC : better MD5 handling, Run button in boot mode, handling data feedback in boot protocol
edouard [Thu, 17 Feb 2011 10:11:04 +0100] rev 571
Debug switch (file in CWD). LPC : better MD5 handling, Run button in boot mode, handling data feedback in boot protocol

Thu, 03 Feb 2011 18:23:24 +0100LPC application mode IDLE comamnd is now the same as PLCID (0x07)
Edouqrd Tisserant <edouard.tisserant@gmail.com> [Thu, 03 Feb 2011 18:23:24 +0100] rev 570
LPC application mode IDLE comamnd is now the same as PLCID (0x07)

Thu, 03 Feb 2011 18:20:47 +0100LPC program transfer more verbose, test code added in __main__ of LPCBootProto
Edouqrd Tisserant <edouard.tisserant@gmail.com> [Thu, 03 Feb 2011 18:20:47 +0100] rev 569
LPC program transfer more verbose, test code added in __main__ of LPCBootProto

Tue, 01 Feb 2011 17:28:41 +0100Moved locales out of platform agnostic C template
edouard [Tue, 01 Feb 2011 17:28:41 +0100] rev 568
Moved locales out of platform agnostic C template

Tue, 01 Feb 2011 11:05:07 +0100keep LPC in boot mode to give a chance to ask for a transfer
edouard [Tue, 01 Feb 2011 11:05:07 +0100] rev 567
keep LPC in boot mode to give a chance to ask for a transfer

Wed, 17 Nov 2010 08:30:35 +0100Fix bug in LPCBeremiz that use input retrieve and publish code for ouput with the same location
laurent [Wed, 17 Nov 2010 08:30:35 +0100] rev 566
Fix bug in LPCBeremiz that use input retrieve and publish code for ouput with the same location

Thu, 19 Aug 2010 16:08:12 +0200Adding german translations (thanks to anonymous contributor)
laurent [Thu, 19 Aug 2010 16:08:12 +0200] rev 565
Adding german translations (thanks to anonymous contributor)

Fri, 04 Jun 2010 17:36:11 +0200merge
ed [Fri, 04 Jun 2010 17:36:11 +0200] rev 564
merge

Fri, 04 Jun 2010 16:11:19 +0200Better serial comm handling in LPC connector
Lolitech [Fri, 04 Jun 2010 16:11:19 +0200] rev 563
Better serial comm handling in LPC connector

Fri, 04 Jun 2010 17:04:25 +0200Fix MatchMD5 result if no serial connection available
laurent [Fri, 04 Jun 2010 17:04:25 +0200] rev 562
Fix MatchMD5 result if no serial connection available

Fri, 04 Jun 2010 15:39:14 +0200Fix bug on LPCConnector initial value
laurent [Fri, 04 Jun 2010 15:39:14 +0200] rev 561
Fix bug on LPCConnector initial value

Fri, 04 Jun 2010 15:35:28 +0200Fix transfer button enable state and build button state
laurent [Fri, 04 Jun 2010 15:35:28 +0200] rev 560
Fix transfer button enable state and build button state

Fri, 04 Jun 2010 15:17:48 +0200Fix buttons state according to online mode
laurent [Fri, 04 Jun 2010 15:17:48 +0200] rev 559
Fix buttons state according to online mode

Fri, 04 Jun 2010 15:16:23 +0200(no commit message)
Lolitech [Fri, 04 Jun 2010 15:16:23 +0200] rev 558
(no commit message)

Fri, 04 Jun 2010 15:11:27 +0200Removed PLCprint, not existing in LPC connector context.
Lolitech [Fri, 04 Jun 2010 15:11:27 +0200] rev 557
Removed PLCprint, not existing in LPC connector context.

Fri, 04 Jun 2010 14:59:11 +0200LPC Composer don't send comma at the end of serial port name.
Lolitech [Fri, 04 Jun 2010 14:59:11 +0200] rev 556
LPC Composer don't send comma at the end of serial port name.

Fri, 04 Jun 2010 14:58:24 +0200Disabled logging commands into files
Lolitech [Fri, 04 Jun 2010 14:58:24 +0200] rev 555
Disabled logging commands into files

Fri, 04 Jun 2010 14:58:03 +0200Fixed PLC status bytes values
Lolitech [Fri, 04 Jun 2010 14:58:03 +0200] rev 554
Fixed PLC status bytes values

Fri, 04 Jun 2010 13:47:02 +0200Move init code from variable to module
laurent [Fri, 04 Jun 2010 13:47:02 +0200] rev 553
Move init code from variable to module

Fri, 04 Jun 2010 13:09:35 +0200Bug with recv from socket fixed
laurent [Fri, 04 Jun 2010 13:09:35 +0200] rev 552
Bug with recv from socket fixed

Fri, 04 Jun 2010 11:27:00 +0200Adding support for command line communication by socket instead of stdin/stdout
laurent [Fri, 04 Jun 2010 11:27:00 +0200] rev 551
Adding support for command line communication by socket instead of stdin/stdout

Fri, 04 Jun 2010 09:02:22 +0200Adding support for initialize all LPC module variables even if not used
laurent [Fri, 04 Jun 2010 09:02:22 +0200] rev 550
Adding support for initialize all LPC module variables even if not used

Thu, 03 Jun 2010 17:26:47 +0200Fixed bug on frame close.
Lolitech [Thu, 03 Jun 2010 17:26:47 +0200] rev 549
Fixed bug on frame close.

Thu, 03 Jun 2010 17:23:11 +0200Some fixes in LPCApp{Obj,Proto}, to be continued.
Lolitech [Thu, 03 Jun 2010 17:23:11 +0200] rev 548
Some fixes in LPCApp{Obj,Proto}, to be continued.

Thu, 03 Jun 2010 17:21:40 +0200Reorganization of threading for command line and wx main loops. Commands are now cleanly serialized through calls to wx.CallAfter. wx mainloop now runs on main thread.
Lolitech [Thu, 03 Jun 2010 17:21:40 +0200] rev 547
Reorganization of threading for command line and wx main loops. Commands are now cleanly serialized through calls to wx.CallAfter. wx mainloop now runs on main thread.

Thu, 03 Jun 2010 17:17:51 +0200Safer passing of PLC ID to make command line.
Lolitech [Thu, 03 Jun 2010 17:17:51 +0200] rev 546
Safer passing of PLC ID to make command line.

Thu, 03 Jun 2010 12:57:28 +0200Refactored LPC connector for new bootloader and application modes
Lolitech [Thu, 03 Jun 2010 12:57:28 +0200] rev 545
Refactored LPC connector for new bootloader and application modes

Thu, 03 Jun 2010 12:56:21 +0200Removed boring PLC/build compare messages.
Lolitech [Thu, 03 Jun 2010 12:56:21 +0200] rev 544
Removed boring PLC/build compare messages.

Thu, 03 Jun 2010 12:54:45 +0200Disabled boring standard conformance checks, fixed possible race condition with StatusTimer, fixed warning message in AbortTransfer
Lolitech [Thu, 03 Jun 2010 12:54:45 +0200] rev 543
Disabled boring standard conformance checks, fixed possible race condition with StatusTimer, fixed warning message in AbortTransfer

Wed, 02 Jun 2010 16:53:38 +0200changes merged
laurent [Wed, 02 Jun 2010 16:53:38 +0200] rev 542
changes merged

Wed, 02 Jun 2010 16:52:58 +0200Adding compile button when unconnected
laurent [Wed, 02 Jun 2010 16:52:58 +0200] rev 541
Adding compile button when unconnected

Wed, 02 Jun 2010 16:40:06 +0200Overloaded GetBinaryCode in LPC connector returns ready to send over serial binary
Lolitech [Wed, 02 Jun 2010 16:40:06 +0200] rev 540
Overloaded GetBinaryCode in LPC connector returns ready to send over serial binary

Wed, 02 Jun 2010 16:35:00 +0200Modifying LPCBeremiz to launch silently a frame and show or hide it on demand.
laurent [Wed, 02 Jun 2010 16:35:00 +0200] rev 539
Modifying LPCBeremiz to launch silently a frame and show or hide it on demand.
Adding support for transferring LPC programs.

Wed, 02 Jun 2010 10:08:58 +0200Moved LPC specific code from toolchain_makefile into LPC target, added FROM_BEREMIZ variable to tell LPC's makefile it is invoked from here.
edouard [Wed, 02 Jun 2010 10:08:58 +0200] rev 538
Moved LPC specific code from toolchain_makefile into LPC target, added FROM_BEREMIZ variable to tell LPC's makefile it is invoked from here.

Tue, 01 Jun 2010 13:08:13 +0200merge
Lolitech@ACER9810.smarteh.local [Tue, 01 Jun 2010 13:08:13 +0200] rev 537
merge

Tue, 01 Jun 2010 11:24:09 +0200Cosmetix fixes for LPC tests/build
Lolitech [Tue, 01 Jun 2010 11:24:09 +0200] rev 536
Cosmetix fixes for LPC tests/build

Tue, 01 Jun 2010 10:03:58 +0200merge with forgoten rev
lolitech@ks351503.kimsufi.com [Tue, 01 Jun 2010 10:03:58 +0200] rev 535
merge with forgoten rev

Wed, 16 Dec 2009 15:21:17 +0100Bug on FileMenu not refreshed when modifications fixed
laurent [Wed, 16 Dec 2009 15:21:17 +0100] rev 534
Bug on FileMenu not refreshed when modifications fixed

Fri, 25 Dec 2009 13:08:20 +0100Christmas 2009 release
Edouard TISSERANT <edouard.tisserant@gmail.com> [Fri, 25 Dec 2009 13:08:20 +0100] rev 533
Christmas 2009 release

Wed, 23 Dec 2009 22:23:02 +0100Fixed startin debugger with non empty debug variable list
Edouard TISSERANT <edouard.tisserant@gmail.com> [Wed, 23 Dec 2009 22:23:02 +0100] rev 532
Fixed startin debugger with non empty debug variable list

Wed, 16 Dec 2009 15:09:12 +0100Changes merged
laurent [Wed, 16 Dec 2009 15:09:12 +0100] rev 531
Changes merged

Wed, 16 Dec 2009 15:08:38 +0100Bug when trying to generate LPCBus code fixed
laurent [Wed, 16 Dec 2009 15:08:38 +0100] rev 530
Bug when trying to generate LPCBus code fixed

Wed, 16 Dec 2009 15:07:47 +0100Bug when try to SaveAs on Windows fixed
laurent [Wed, 16 Dec 2009 15:07:47 +0100] rev 529
Bug when try to SaveAs on Windows fixed

Wed, 16 Dec 2009 14:53:36 +0100merge
Edouard TISSERANT <edouard.tisserant@gmail.com> [Wed, 16 Dec 2009 14:53:36 +0100] rev 528
merge

Wed, 16 Dec 2009 14:13:55 +0100Changes merged
tkragelj [Wed, 16 Dec 2009 14:13:55 +0100] rev 527
Changes merged

Wed, 16 Dec 2009 14:12:47 +0100Added flush when printing to standard output.
tkragelj [Wed, 16 Dec 2009 14:12:47 +0100] rev 526
Added flush when printing to standard output.

Wed, 16 Dec 2009 14:51:28 +0100LPCobject writes PLC info string to stdout, for LPC composer to update
Edouard TISSERANT <edouard.tisserant@gmail.com> [Wed, 16 Dec 2009 14:51:28 +0100] rev 525
LPCobject writes PLC info string to stdout, for LPC composer to update

Wed, 16 Dec 2009 13:37:50 +0100Update french translation after modifications
laurent [Wed, 16 Dec 2009 13:37:50 +0100] rev 524
Update french translation after modifications

Wed, 16 Dec 2009 13:26:59 +0100Bug when pyserial not available fixed
laurent [Wed, 16 Dec 2009 13:26:59 +0100] rev 523
Bug when pyserial not available fixed

Tue, 15 Dec 2009 20:51:51 +0100Adding CheckRetainBuffer into plc_Linux_main.c
laurent [Tue, 15 Dec 2009 20:51:51 +0100] rev 522
Adding CheckRetainBuffer into plc_Linux_main.c

Tue, 15 Dec 2009 18:24:50 +0100LPC transfer tested, added PLCInfo along MD5 checksum while invoking makefile
edouard [Tue, 15 Dec 2009 18:24:50 +0100] rev 521
LPC transfer tested, added PLCInfo along MD5 checksum while invoking makefile

Tue, 15 Dec 2009 16:04:28 +0100Fixed typos in LPC connector
edouard [Tue, 15 Dec 2009 16:04:28 +0100] rev 520
Fixed typos in LPC connector

Tue, 15 Dec 2009 15:39:39 +0100Adding message to standard output to signal when LPCBeremiz is closed
laurent [Tue, 15 Dec 2009 15:39:39 +0100] rev 519
Adding message to standard output to signal when LPCBeremiz is closed

Tue, 15 Dec 2009 15:35:02 +0100Fixed confusion about __common_ticktime type, redesigned LPC PLC timer support
edouard [Tue, 15 Dec 2009 15:35:02 +0100] rev 518
Fixed confusion about __common_ticktime type, redesigned LPC PLC timer support

Tue, 15 Dec 2009 14:40:45 +0100Bug when changing LPCBeremiz OnlineMode fixed
laurent [Tue, 15 Dec 2009 14:40:45 +0100] rev 517
Bug when changing LPCBeremiz OnlineMode fixed

Tue, 15 Dec 2009 14:40:18 +0100Reset connector when disconnected
laurent [Tue, 15 Dec 2009 14:40:18 +0100] rev 516
Reset connector when disconnected