convert FindInPouDialog from wx.Frame to wx.Dialog

In this case FindInPouDialog Windows isn't listed in windows manager
on Alt-Tab. And it's not shown on top of other applications. For
example, previously the dialog was shown even on top of web browser or
word processor.

temporary disable SFC transitions in IL, because matiec can't compile it

matiec freezes in this case.
See https://bitbucket.org/mjsousa/matiec/issues/58/iec2c-freezes-if-sfc-transition-is-in-il

fix issue with creating SFC transitions using ST and IL

Beremiz generates text representation for transitions without names.
Therefore transition name in its IL code is not needed.

replace '-' with '.' in resource tab and transition/action SFC code


This makes tab names consistent with the way the same information is shown in variable panel.

check during program generation whether source signal is defined for single task

fix strange behavior on Backspace press in ST

Before:
if text was selected and cursor was at indention, one indention (two
spaces) was removed.

if cursor was at start position of the line, then nothing happened.

if cursor was in the middle of indention then on backspace more
indention were added


Now:
if text is selected, it will be removed.
if cursor is at start position, then new line will be removed.
if cursor was in the middle of indention one indention is removed.

fix close button in system menu for AboutDialog on Windows


If SetEscapeId receives wx.ID_CLOSE as parameter, then on Windows with
wxPython 2.8 system close button in title bar stops working.
If wx.ID_CANCEL or wx.ID_OK is used in SetEscapeId call, then close
button works correctly.

make renames caseinsensitive

fix problem with SFC action/transition rename

Traceback (most recent call last):
File "/home/developer/WorkData/PLC/beremiz/beremiz/IDEFrame.py", line
1636, in OnProjectTreeItemEndEdit
elif new_name.upper() in [name.upper() for name in
self.Controler.GetProjectPouVariableNames(pou_name) if name !=
old_name]:
NameError: global name 'pou_name' is not defined

fix problem that it was impossible to edit SFC jump, if it references non-existent SFC step

remove all corresponding SFC jumps when SFC step is removed (but only in DRIVENDRAWING_MODE)

rename all corresponding SFC jumps when SFC step is renamed (but only in DRIVENDRAWING_MODE)

add check of new project path in Save As
add dialog window if selected directory is the current directory project, or already contains another project

fix issue that in Debug mode LD instance doesn't show correctly its state after
continuation of FBD_Connector.

Previously state signals doesn't propogate through FBD_Connector.

fix issue with task rename if "Name" column label is translated into
other language

fix issue with compiling SFC POU with non-connected transition (type "connection")

fix bug with recent projects menu, remove path to the project from menu, if project directory doesn't exist

fix bug with empty directories in recent projects menu
remove path to a project from recent projects menu, if project directory is empty

fix list of recent projects in File menu, add path to current project after Save As

by default init input and output in step sfc block, and output for initial step sfc block

update PLC status after initialization

This is necessary especially if existed PLC program is loaded, but PLC
is not started automatically. In this case taskbar icon shows that PLC
isn't empty.

always load existing PLC program from the working directory

stop PLC before unloading


This fixes segmentation fault if service was quit without stopping it.
It has happened if Beremiz service was quit using taskbar icon or by
closing Beremiz IDE (in case of autostarted local service).

In second case to trigger the bug following step has to be done:
1. Open Beremiz IDE
2. Open project, compile and connect to LOCAL:// runtime
3. Transfer and start the PLC program
4. Open other project without disconneting the PLC runtime
5. Close Beremiz IDE

add internatialization support for Beremiz_service.py

fix issue with changing annonced Pyro service name via taskbar icon

don't crash on trying to change IP interface for Beremiz_service using taskbar icon if IP wasn't previously


By default IP is not set (None) and service listen only on localhost interface.

start/stop from taskbar icon only if PLC is stopped/started

close Pyro socket after daemon stop


without that socket port is open after daemon shutdown.
As a result if you restart daemon with new settings (service name, for example),
it can't listen on already used port and opens the next free TCP port
regardless of requested settings.

add python-wxgtk3.0 support to Beremiz_service.py

make about dialog on Windows not so big


It was automatically expanded to place description in one line.

update Russian translation

add i18n to PLC status

Extra strings are added to the code to make mki18n.py to find these
strings in source files and put them into i18n/messages.pot.

remove clear and reset execution order buttons in popup menu in SFC and LD viewers.

fix initial(equal to the min) number of sequences in SFC Divergence dialog.

make only correct blocks(by IEC 61131-3 standard) available in wire popup menu in SFC Viewer

move EnhancedStatusBar.py to the right location

add internatialization support to startup messages during checking software updates

fix translation strings with multiple parameters


this fixes a lot of warnings given by msgmerge:

../PLCOpenEditor.py:196: warning: 'msgid' format string with unnamed arguments cannot be properly localized:
The translator cannot reorder the arguments.
Please consider using a format string with named arguments,

change bug report address for PLCOpenEditor to beremiz-devel@lists.sourceforge.net

make error message to be the same as in Beremiz IDE

fix segmentation fault on clicking red point in compilation console if that compilation error coverts several units in plcopen file

closes #11

add localization to time strings in DebugVariablePanel and to dialog shown after variable drag'n'drop

fix issue that if located variable was dropped in location column, then address was changed in wrong row (row - 1).

It's not neccessary to carry about label size. YToRow() does the work.

increase size for time buttons in LogViewer

The buttons are slightly bigger now. This gives more space for label
translations in other languages.
closes #12

don't rebuild the makefile based project if only companyName, projectName or productName are changed

And this fix current encoding issues, because all these information fields can
contain non-latin characters.

add progress bar to status bar

It can be used to display progress during program upload.
To use it call ShowPLCProgress (like ShowPLCProgress("transfered",
10)) in your PLCObject implementation.

fix warning: 'return' with no value in function startPLC

fix inconsistent whitespace

fix license notices in source files and license files under GPLv2+

Previously a lot of files were referenced to GNU Public License 2.1,
which never existed.
All copyright attributions are kept the same.

fix PLC autostart option for Beremiz_service.py

remove old debug code

fix wrong font family in CustromGrid control

closes #10

now only correct chart can be created in SFC Viewer

if user trying to connect incompatible blocks (by IEC 61131-3 standard), wire highlight will become red

add Russian translations for About dialogs

make about dialog boxes use standard wx about dialogs

Any information in dialog can be easily changed without much effort
and the dialog can be easy translated.

Unfortunately on Windows there is no good standard about dialog,
therefore own implementation is used there.

fix highlighting error and warning messages with non-lating characters

fix breaking non-latin description and comments in FBD, LD, SFC and
project settings after Undo operation

fix borders of pull-down choice list box in Config tab, in Project Properties

add version.py needed for previous commit '4ce8492'

add version with commit hash to 'About' dialogs for Beremiz IDE and PLCOpenEditor

ignore generated bugreports and output of i18n script

now dialogs Find and Search in Project can be closed with ESC button

fix russian translation of "direction" in Find dialog

fix major bugs in Find and Search in Project functionality.

fix case sensitive and regexp search, remove duplicating code

Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>

fix issue with non-updated button 'generated IECCode' after Build and Clean

increase dialog size for edit SFC transition, so buttons are visible

fix issue that sometimes period for cyclic task wasn't saved.

This is complete fix for the problem described in 8626bba.

add first steps example, that shows how use all IEC 61131 languages

fix issue with empty frame with generated ST code

fix not saving location address from variable panel

this regression was introduced by commit 3518d10

add $(Beremiz installation)/mingw/bin in PATH on Windows platform

This fixes issue if multiple gcc installation are found in user's
PATH. Now gcc from Beremiz is used by default.

fix issue with non-working global hotkeys in IEC code panel

add more comments to svgui example

cleanup traffic lights example

cleanup svgui example

Fix bug with two or more wires connected to one input. Now only one wire can be connected to one input, except BOOLean signals in LD and SFC. If user trying to connect wire with already connected input, wire highlight will become red.
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>

fix issue with sequence of multiple whitespaces in makefile command
line from project configuration

for every additional whitespace '""' was inserted in result command line.

fix minor issue and do some cleanup work in genericmake example

cleanup python example

complete fix in commit 3518d10 for wxgtk2.8

fix syncronization issue during killing ProcessLoggers on IDE close

Add russian translation on label "Tick" in debug variable panel.

Add russian language in Project properties -> Other menu.

fix issue, that was impossible to change variable location IEC-address, when wx 3.0 is used

Merge

fix infinite recursion in 'Reset Execution Order' functionality if FBD body contains feedback connections

fix issues in PLCOpenEditor with moving from wxWidgets 2.8 to 3.0

1)
./PLCOpenEditor.py:63: wxPyDeprecationWarning: Using deprecated class PySimpleApp.
app = wx.PySimpleApp()

2)
./PLCOpenEditor.py:475: wxPyDeprecationWarning: Call to deprecated item.
wx.InitAllImageHandlers()

3)
Traceback (most recent call last):
File "./PLCOpenEditor.py", line 480, in <module>
frame = PLCOpenEditor(None, fileOpen=fileOpen)
File "./PLCOpenEditor.py", line 163, in __init__
IDEFrame.__init__(self, parent)
File "/tmp/f/beremiz/IDEFrame.py", line 657, in __init__
self._init_ctrls(parent)
File "/tmp/f/beremiz/IDEFrame.py", line 485, in _init_ctrls
self._init_icon(prnt)
File "/tmp/f/beremiz/IDEFrame.py", line 476, in _init_icon
if self.icon:
AttributeError: 'PLCOpenEditor' object has no attribute 'icon'

update messages and add Russian translation for new menu entry 'switch perspective'

Merged in Surkovsv/beremiz (pull request #4)

Add hotkey (F12) for switching perspective.

Add hotkey (F12) for switching perspective.

Switching perspective feature hides/restores all panels except of the main editor window for current FB.
So all available screen space is used for editor.

Merged skvorl/beremiz into default

Fixed crash when starts on OS X with wxPython 3.0.x

Merged skvorl/beremiz into default

Added .idea dir to ignore.

cleanup logging example

add comments, rename variables, some rework for algorithm

fix non-working logging at first connection to PLC after Beremiz launch

At the same time this helps to avoid exception described in 1484:d5efbb20927e.

Merged in Surkovsv/beremiz (pull request #2)

fix bug with non-editable names and types of FB local variables in POU's written in ST or IL

fix bug with non-editable names and types of FB local variables in POU's written in ST or IL

fix highlighting input/outputs in function call in ST, if comment section is placed
inside call.

For example:

PackOutputs(
W4 := OUT1,
W5 := OUT2,
W6 := OUT3,
W7 := OUT4,
W8 := OUT5 (* comment inside call *),
W9 := OUT6,
W10 := OUT7,
W11 := OUT8);

add initialization tick time on Beremiz start

This fixes issue #6

fix race condition in ProcessLogger

- Fixed startup from ancestor code.

This fixes issue #5

fix bug: Beremiz IDE hangs during launching Beremiz_service

this is regression introduced as side effect by d7f474d [fix issue
with sometimes wrong return code of ProcessLogger]

automatically detect flags supported by matiec and find correct path
for matiec C library files

This makes possible to use an old matiec and the new one.

fix bug that appears if datatype in the project tree is renamed to wrong name (keyword, existend type,...)

Traceback (most recent call last):
File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk2/wx/_core.py", line 16765, in <lambda>
lambda event: event.callable(*event.args, **event.kw) )
File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk2/wx/lib/expando.py", line 126, in _adjustCtrl
numLines = self.GetNumberOfLines()
File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk2/wx/_core.py", line 16710, in __getattr__
raise PyDeadObjectError(self.attrStr % self._name)
PyDeadObjectError: The C++ part of the TreeTextCtrl object has been deleted, attribute access no longer allowed.

add distribution license notice to about dialog as GPL requires

add GPLv2 license

add copyright notices to python files where there were missing, that
is required by GPLv2

fix issue that was impossible to remove local instance of functional
block if pou is written in ST or IL

fix highlighting of multiline comments in ST and IL

close #2

fix error if non-latin character was entered in initial value in
data type element

Traceback (most recent call last):
File "/home/beremiz/editors/DataTypeEditor.py", line 575, in OnStructureElementsGridCellChange
value = self.StructureElementsTable.GetValue(row, col)
File "/home/beremiz/editors/DataTypeEditor.py", line 80, in GetValue
return str(value)
UnicodeEncodeError: 'ascii' codec can't encode characters in position 0-2: ordinal not in range(128)
Traceback (most recent call last):
File "/home/beremiz/editors/DataTypeEditor.py", line 80, in GetValue
return str(value)
UnicodeEncodeError: 'ascii' codec can't encode characters in position 0-2: ordinal not in range(128)
Traceback (most recent call last):
File "/home/beremiz/editors/DataTypeEditor.py", line 80, in GetValue
return str(value)
UnicodeEncodeError: 'ascii' codec can't encode characters in position 0-2: ordinal not in range(128)

fix issue with sometimes wrong return code of ProcessLogger


As a result of wrong return code Beremiz gives folowing traceback:
Traceback (most recent call last):
File "./Beremiz.py", line 850, in OnMenu
getattr(self.CTR, method)()
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 925, in _Build
IECGenRes = self._Generate_SoftPLC()
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 568, in _Generate_SoftPLC
return self._Compile_ST_to_SoftPLC()
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 661, in _Compile_ST_to_SoftPLC
C_files.remove("POUS.c")
ValueError: list.remove(x): x not in list

The problem is that both threads (for reading stdout and stderr) call self.Proc.poll(),
that updates internal returncode field. This call is done without any locking and the first thread gets correct result,
but other gets 0 as retval. If 0 gets thread, that afterwards calls callback finish, then wrong return code is returned
to the parent. Now only the thread with a callback polls for the return code, other thread just checked local value.

Additionally function spin() waits now until all threads finish reading their pipes, so the results are always correct.

Fix error about missing attribute 'timeout' that happens sometimes during compilation

The fix [1476:49f1763a5613] of the problem with following trace was wrong.
Traceback (most recent call last):
File "./Beremiz.py", line 1229, in run_with_except_hook
run_old(*args, **kw)
File
"/home/developer/WorkData/PLC/beremiz/beremiz/util/ProcessLogger.py",
line 68, in run
self.endcallback(self.Proc.pid, err)
File
"/home/developer/WorkData/PLC/beremiz/beremiz/util/ProcessLogger.py",
line 169, in finish
if self.timeout: self.timeout.cancel()
AttributeError: ProcessLogger instance has no attribute 'timeout'
The problem was that compilation process was finished before the timeout attribute is set.
Now timeout is set before launcing of compilation process.

fix copying elements with non-latin content like comment element, or
variables with description in non-latin character set

before any non-latin text was converted after copying to strings like '&#1069;&#1090;&#1086;...'

fix issue that if functional block is dragged from project panel into
ST text editor and in dialog 'Please enter a block name' button
'cancel' is pressed, despite of cancel text about drag'n'dropped type
is pasted in ST program.

fix regression introduced by changeset: 1431:28e9d479aa65 [Use '-p' command line option when running matiec (iec2c)]

Variable matiec_flags in c_ext.py and PythonFileCTNMixin.py is not
used for flags for matiec (IEC to C compiler) actually, but it's used
to compile C-code generated for extensions using normal C-compiler,
like gcc.

fix display of ARRAY fields inside of structure data types.

Previously ARRAY fields in structures were displayed, for example,
like 'ARRAY [1..2] OF ARRAY' instead of 'ARRAY [1..2] OF INT'. Because
of this error the array type can be really edited.

fix Traceback if search icon on library panel is clicked, when no
category/item is selected in the library.

The problem is here, that if nothing is selected method GetSelection()
returns root item, that doesn't have any python data associated with it.
This issue seems to be wx3.0 specified, because it doesn't exist
with wx2.8 on Windows.

update Russian about Beremiz dialog window

fix issue, that was impossible to change time interval for cyclic
tasks, when wx 3.0 is used

fix deprecation warnings about accessing properties m_x, m_y of wxKeyEvent

/home/beremiz/beremiz/controls/PouInstanceVariablesPanel.py:354: wxPyDeprecationWarning: Accessing deprecated property.
event.m_x = size.width / 2

fix set_color_cycle from matplotlib deprecation warning

/usr/lib/python2.7/dist-packages/matplotlib/cbook.py:137: MatplotlibDeprecationWarning: The set_color_cycle attribute was deprecated in version 1.5. Use set_prop_cycle instead.
warnings.warn(message, mplDeprecation, stacklevel=1)

update Russian translation

add i18n for some strings in DiscoveryDialog, DurationEditDialog, ProjectDialog and CodeFileEditor

fix wrong Row number in DiscoveryDialog.py that caused following traceback:

Traceback (most recent call last):
File "/home/beremiz/beremiz/ProjectController.py", line 1536, in _Connect
dialog = DiscoveryDialog(self.AppFrame)
File "/home/beremiz/beremiz/dialogs/DiscoveryDialog.py", line 124, in __init__
self._init_ctrls(parent)
File "/home/beremiz/beremiz/dialogs/DiscoveryDialog.py", line 121, in _init_ctrls
self._init_sizers()
File "/home/beremiz/beremiz/dialogs/DiscoveryDialog.py", line 73, in _init_sizers
self._init_coll_ButtonGridSizer_Growables(self.ButtonGridSizer)
File "/home/beremiz/beremiz/dialogs/DiscoveryDialog.py", line 64, in _init_coll_ButtonGridSizer_Growables
parent.AddGrowableRow(1)
File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk2/wx/_core.py", line 15343, in AddGrowableRow
return _core_.FlexGridSizer_AddGrowableRow(*args, **kwargs)
PyAssertionError: C++ assertion "!m_rows || idx < (size_t)m_rows" failed at ../src/common/sizer.cpp(1967) in AddGrowableRow(): invalid row index

increase height of some dialog windows so they have enough space for buttons

add translation into Russian for dialog window "About PLCOpen Editor"

add translation of "about" window into Russian

make About and Find dialogs have the same icon as main Beremiz window

all child windows will take the parent's icon, if no other is specified.

fix splash loading with wx3.0

Previously only gray square was shown. Apparently to show splash screen several calls of wx.Yield() are necessary.
Unfortunately splash.IsShowOnScreen() returns always 1 regardless of whether splash is on the screen or not.
this fix is a dirty hack. It just process all events after splash is created during 0.3 seconds.

add i18n for couple of strings in TextViewer.py
add source file for Russian translation
update messages.pot and app.fil
update Russian translation

increase height for ConnectionDialog and ArrayTypeDialog to have
enough place for buttons

add Russian translation

bitmap in wx3.0 doesn't have useAlpha() method

Suppress WXDEBUG assertions, as happens by default with wx2.8. This is
necessary for wx3.0

Exception while connecting LOCAL://!
Traceback (most recent call last):
File "/home/beremiz/beremiz/ProjectController.py", line 1560, in _Connect
self._SetConnector(connectors.ConnectorFactory(uri, self))
File "/home/beremiz/beremiz/ProjectController.py", line 1508, in _SetConnector
self.StatusTimer.Start(milliseconds=500, oneShot=False)
File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk2/wx/_misc.py", line 1324, in Start
return _misc_.Timer_Start(*args, **kwargs)
PyAssertionError: C++ assertion "m_window" failed at ../src/gtk/dcclient.cpp(2043) in DoGetSize(): GetSize() doesn't work without window

enable use of wxWidgets-3.0

make mki18n.py wx-3.0 compatible and fix segmentation fault

$ python mki18n.py -m -v --moTarget=../locale --domain=Beremiz
No project directory given. Using current one: /home/beremiz/beremiz/i18n
Application domain used is: 'Beremiz'
Target directory for .mo files is: ../locale
../src/common/stdpbase.cpp(62): assert "traits" failed in Get(): create wxApp before calling this
Segmentation fault

fix issue, then it wasn't possible to view FBD programs

the reason for that is possible wx-3.0-gtk2 bug that happens if
ALWAYS_SHOW_SB is set.

Traceback (most recent call last):
File "Beremiz.py", line 1045, in OnProjectTreeItemActivated
IDEFrame.OnProjectTreeItemActivated(self, event)
File "IDEFrame.py", line 1667, in OnProjectTreeItemActivated
self.EditProjectElement(item_infos["type"], item_infos["tagname"])
File "IDEFrame.py", line 1752, in EditProjectElement
new_window = Viewer(self.TabsOpened, tagname, self, self.Controler)
File "editors/Viewer.py", line 611, in __init__
EditorPanel.__init__(self, parent, tagname, window, controler, debug)
File "editors/EditorPanel.py", line 68, in __init__
self._init_ctrls(parent)
File "editors/EditorPanel.py", line 52, in _init_ctrls
self._init_Editor(self)
File "editors/Viewer.py", line 603, in _init_Editor
style=wx.HSCROLL | wx.VSCROLL | wx.ALWAYS_SHOW_SB)
File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk2/wx/_windows.py", line 296, in __init__
_windows_.ScrolledWindow_swiginit(self,_windows_.new_ScrolledWindow(*args, **kwargs))
PyAssertionError: C++ assertion "scrolled" failed at ../src/gtk/scrolwin.cpp(205) in DoShowScrollbars(): window must be created

fix issue, then it wasn't possible to remove functional blocks from
project using right click and popup menu.

The problem is that, PopupMenu was called using IDEFrame object and as
a result item in ProjectTree loosed focus and focus went to IDEFrame.
Therefore later functions couldn't detect which item in ProjectTree
was selected.

fix many compilation warnings about static variables used by non-static functions

[CC] plc_main.c -> plc_main.o
/tmp/be/build/plc_main.c:396:40: warning: ?LogBuff? is static but used in inline function ?copy_from_log? which is not static
memcpy((char*)buf + remaining, LogBuff[level], size - remaining);
^
/tmp/be/build/plc_main.c:395:22: warning: ?LogBuff? is static but used in inline function ?copy_from_log? which is not static
memcpy(buf, &LogBuff[level][buffpos], remaining);
^
...

^
/tmp/be/build/plc_debugger.c:825:20: warning: ?retain_offset? is static but used in inline function ?BufferIterator? which is not static
Retain(retain_offset, size, real_value_p);
^
/tmp/be/build/plc_debugger.c:823:47: warning: ?retain_offset? is static but used in inline function ?BufferIterator? which is not static
unsigned int next_retain_offset = retain_offset + size;
^
^

make attribute CFLAGS and LDFLAGS optional and add default empty value

Actually CFLAGS and LDFLAGS are not required and can be empty.
Without default empty value if target platform in project settings was
set to "Linux" CFLAGS and LDFLAGS was initialized with NoneType.
The result was broken build and it wasn't to save/load project with
such settings.

Traceback (most recent call last):
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 956, in _Build
if not builder.build() :
File "/home/developer/WorkData/PLC/beremiz/beremiz/targets/toolchain_gcc.py", line 96, in build
Builder_CFLAGS = ' '.join(self.getBuilderCFLAGS())
TypeError: sequence item 0: expected string, NoneType found

fix issue, when structure data type with array field is created

Traceback (most recent call last):
File "editors/DataTypeEditor.py", line 669, in ElementArrayTypeFunction
self.RefreshTypeInfos()
File "editors/DataTypeEditor.py", line 761, in RefreshTypeInfos
self.Controler.SetDataTypeInfos(self.TagName, infos)
File "PLCControler.py", line 2075, in SetDataTypeInfos
array.baseType.setcontent(PLCOpenParser.CreateElement(
AttributeError: 'lxml.etree._Element' object has no attribute 'setcontent'

fixes sometimes happened error during project compilation

Traceback (most recent call last):
File "./Beremiz.py", line 1229, in run_with_except_hook
run_old(*args, **kw)
File
"/home/developer/WorkData/PLC/beremiz/beremiz/util/ProcessLogger.py",
line 68, in run
self.endcallback(self.Proc.pid, err)
File
"/home/developer/WorkData/PLC/beremiz/beremiz/util/ProcessLogger.py",
line 169, in finish
if self.timeout: self.timeout.cancel()
AttributeError: ProcessLogger instance has no attribute 'timeout'

merge

Use '-p' command line option when running matiec (iec2c)

Add command line option '-l' when calling matiec

merge

merge

merge

Update __SET_VAR() macros to reflect changes made to matiec

Merged

Merged

Fixed win32 build warning caused by leftover debug code

Fixed win32 runtime crashing when attempting to log before errors before PLC start. Added pictures to wxHMI and fixed it so that it loads on windows as well

Fixed canfestival extension own path resolution

Changed runtime's global PLCID to PLC_ID, working around redefinition in windoze' headers.

Extended wxHMI test

Added wxHMI test

merged forgotten changesets

Added log message when RETAIN memory not valid

Fixed leftover typo

Added PLCID variable accessible from C side, set with binarie's MD5. Added retain init and cleanup calls. Extended tests/python to test PLCID

Splitted plc_Xenomai_main.c to enable further customization

add pyrossl client side

fixed build of some tests

Fixed Nevow website startup

Fixed build of tests/python.

Added Ronan Bignaux (genesis) patch to use wxversion. Fixed side effects with sys.path. Other cosmetic fixes about path included.

Fixed SFC code generation bug detected by Mario

Added __ext_name__ variable accessible from user python code, reflecting extension name. Fixed contend of OnChange field in PLCGlobalsDesc

Added more columns in variable list of extensions' code editors - updating python's PLCGlobals from PLC logic can trigger asynchronous 'OnChange' python call

Fixed systematically loading PLC binary at startup even without -a parameter. Extended py_ext extensions instances variable description (PLCGlobalsDesc). Now contains list of variables organizd by extension, with extension name

Split runtime's twisted modules import and setup to ease runtime extensions hotpatching

More versatile registering of wamp callees

Added forgotten wampconf.json in tests/wamp

WAMP : prefix callee names with given ID so that multiple PLC and IDE can join the same realm

Fixed race condition preventing to stop PLC through WAMP

Added auto-reconnect for runtime. Fixed Beremiz closing problem caused by remaining twisted reactor thread in IDE.

Runtime : Added PLCobject methods registring. IDE : Added WAMP connector. Still need some fixes

Added stub code for runtime WAMP client. Added runtime command line switch to select WAMP url and Nevow web site port. Web port is now fixed, next port number is not tested if bind fails.

Moved twisted/nevow/athena away from Berermiz_service.py + some minor cleanup

Added Beremiz_service.py command line switch to load python extention for runtime independently from PLC program

py_ext user python code can now know about global variables shared with PLC. updated tests/python accordingly

Fixed python runtime trace thread auto suspend. Now suspends after 3 seconds when no trace is requested

Added runtime side trace buffer, handled in a separate thread, limited to 1MB, and dropped after 3 seconds if not used by IDE. GetTraceVariables is not anymore blocking on next PLC cycle

Moved trace buffer unpacking in the IDE. Latest traced variable samples are now passed as a single string

Optimized plc_debug.c generated code. Should produce smaller code size. Added statically initialized array for PLC tracable variable description.

more minor cleanup

minor cleanup

merged forgotten changes

Simplified use of runtime's global variable __common_ticktime accross extensions.

Use '-p' command line option when running matiec (iec2c)

Add command line option '-l' when calling matiec

Fixed location of directory containing IEC standard library in C format.

Change location of directory containing IEC standard library in C format.

Added highlighting of wrong SINGLE task trigger

Fixed incomplete task grid update on interface change, in Resource editor

Enable overloading of availables languages in POU creation dialog

Enable overloading of task triggerring source cell editor (SINGLE) in resource editor. PLCGenerator now generates MULTI keywork instead of SINGLE when task's activation is surroundes with square brackets

Updated tests/python : added derivated return type function declaration+call and re-enabled refrences to global FB interfaces

Fixed declaration and ST code gen for IEC function that return derivated types

Added a variable name text entry dialog to allow name change on drag'n'drops

'NamedConstant' variable D'n'D is now allowed on variable grid

Allow specification of command line arguments encoding in ProcessLogger

Splitted type selection menu code in VariablePanel, making easier to override behaviour by inheritence

Fixed crash at project load when features.libraries is empty (i.e. no libraries are provided).

Added plcopen.definitions.DefaultType, set to INT.

Fixed POU paste exception

Propagated changes made in matiec/lib/accessor.h _SET_VAR macro (Mario's matiec changes merged at 39086e324665) to py_ext library, and other (not compiled in) XML standard FB definitions.

Added 'NamedConstant' drag'n'drop in text programs as well (was only accepted on graphical languages).

Fixed launch of PLCopenEditor, broken since 611fded24ce4.

Organized controller's _Build sub-methods layout. Many (unwanted) white space changes.

Added 'NamedConstant' drag'n'drop in programs. It does create a simple variable with initial value and is usefull for drag'n'drop constants from extensions while keeping a name associated with constant

xmlclass : Ensured precedence of newly defined class in case of conflicting declaration

Fixed Exception dialog crash when original exception contains unicode

Fixed unused variable in plc_debug.c

On windows, prepend CWD to PATH before invoking Generic target make command

Pair with matiec a51a3bb4d613. Re-enable resource add/remove, updated CFLAGS, disabled broken global FG test in tests/python

Fixed typo in plcopen.py

Changed python_gear ratio type from USINT to UINT, less restrictive regarding range

Fixed support for spaces in matiec libraries path with native beremiz build

Delayed CANopen initialization for better busoff recovery

Fixed non initialized timer causing exception in some rare cases (continued)

Fixed non initialized timer causing exception in some rare cases

Fix matplotlib exception when launching on XP

Fixed import error when loading extensions

More gcc warning avoided

Added <string.h> to plc_main_head.c to avoid warnings.

Tidy PLCopen definitions

Removed depricated matiec stdlib-code-generator-generator

Factorized bitmap and i18n resources loading in between PLCopenEditor and Beremiz. Now in utils/misc.py

Re-introduced toolchain_makefile.py. This time, it comes with a 'Generic' target, and a 'genericmake' example

Removed dead code

Fixed xmlclass bug when enabling/disabling libraries in root CTN

RC5

Added example of SFC simulating traffic lights

Fixed bugs in SFC when loading transition condition and referenced transition or action body

Fixed bug with edge and storage parameters in contact and coil not loaded in file saved with older version

Fixed bug when defining variable type as explicit array in VariablePanel

Fixed bug with function POU when extracting return type

Fixed bug with non-ascii characters in program comments

Fixed bug when debugging wire connected to output connector with modifiers even if connector/continuation is used to replace long wires

Fixed bug in debugger when debug tick received is None

Fixed bug with decimal value string formatting

Fixed bug with decimal value string formatting

Fixed bug when graphic element position and size and connection points are decimal

Fixed bug in test if block type is used by current edited pou

Fixed bug when adding and removing function block in graphic viewer. In some cases, the associated variable could stay in the variable panel.

Fixed coil and contact dialog to let user select a complex type variable for contact and coil expression

Fixed bug Drag'n drop variables from left panel to debug panel disabled

Fixed bugs with pou variable infos computation stylesheet

Fixed bug when pasting element with an odd width or height

Fixed refresh speed so that interface is not blocked when debugging

Added support for optimizing debug, preventing to filling buffers with only the last value for debug data consumers that only show the current state

Remove old debug panels and viewers not using matplotlib

Added new debug process separating non-wx thread extracting debug values from connector and 10 Hz wx timer refreshing Beremiz debug Viewers and communicating throw double-buffering, to avoid segmentation faults and optimize CPU usage

Cleaner matplotlib import preventing noisy warnings

Fixed bugs when editing resource variables and tasks

Fixed bug when debugging PLC with Graphic Viewer in debug open and re-transfer PLC

Fixed bug when loading complex type variable initial value

Fixed bug when building project with configuration extra variables

Fixed bug wrong pin number in dialog when creating new power rail on Windows

Fixed bug when removing coil in LD viewer, wires wasn't deleted.

Fixed bug when modifying power rail in LD Viewer

Fixed bug when selecting pou that is not used in project

Added makefile for generating xslt stylesheet from ysl2 files

Fixed pou instance path list computing stylesheet

Fixed pou tagname of instance path computing stylesheet

Fixed pou instance path list computing stylesheet

Fixed xslt stylesheets with pretty print versions

Fixed pou variables instance information loading stylesheet

Fixed pou variables information loading stylesheet

Fixed bug when editing SFC divergence

Improved syntax of pou block information loading stylesheet

Fixed bug when loading connectors modifier

Fixed PouInstanceVariablesPanel, replacing wx controls, too long to create and destroy, by bitmaps directly drawn in panel

Fixed various latency issues removing unnecessary calls

Fixed ActionInfos class with slots

Fixed bug when cancelling ActionBlockDialog

Fixed bug in actionBlock actions editing

Replaced old graphic viewer blocks loading process by xslt stylesheet

Fixed bug with Copy/Paste function instance block when previously edited

Merged

Fixed bug when loading graphic pou connection between blocks and no points for drawing wire are defined

Added support for loading PLCOpen v1 files and modify their content to be compatible with PLCOpen v2

merged

Fixed error message printed when error in XML files is detected

Added support for speed-up loading of graphic POU tabs

Added support for loading XML file even if not following XSD schema (but still following XML syntax), warning user of errors in XML file

merged

Fixed bug in Resource POU instance type selection

Fixed bug when editing block information of an extended standard function

Fixed instance type tagname computing xslt stylesheet

Fixed time consuming function when loading VariablePanel

Fixed bug in VariablePanel, function block variables in graphic viewers could be modified

Fixed Xenomai target according to new xmlclass

Fixed xmlclass for working with included files, adding support for SimpleType elements and solving ambiguity in extension class when different elements share the same name and parent name

Replaced old pou instance type tagname computing by xslt stylesheet

Used OrderedDict for keeping of standard function blocks library defined

Replaced old list of pou instance in project generating process by xslt stylesheet

Fixed bug when removing block

Fixed bug in pou variable list and variable tree xslt stylesheet

Replaced old pou instance variable list generating process by xslt stylesheet

Fixed Beremiz for working with new xmlclass support using lxml

Fixed Additional Function Blocks Library

Replaced standard function blocks library definition from dictionary to plcopen xml files

Fixed bug when printing program generating errors and warnings in PLCOpenEditor

Fixed bug with return type in elements that don't need return type tree and dimension

Removed obsolete process for customizing block code generated in extensions

Fixed bug when modifying project properties

Replaced old pou variable list and variable tree generating by xslt stylesheet

Merged

Fixed bug with direct array variable type definition

Fixed xmlclass and plcopen using precompile xpath where possible

Fixed undo/redo with xmlclass refactoring

Removed obsolete functions for extracting values for xml dom tree and generating xml string

Removed dictionaries storing datatypes and pous defined in project and pou and datatype using tree from model

Removed dictionaries storing enumerated datatypes values, subrange datatypes range and project datatype hierarchy from model

Removed namespaces declaration in subtree elements xml description when copy/paste

Fixed copy/paste with xmlclass refactoring

Fixed SFC block edition and SFC to SFC_textual code generating

Fixed ST program generating module

Fixed bug when adding a configuration

Fixed bug no contextual menu displayed in left panel tree when creating new project

Fixed datatype and configuration editing in xmlclass refactoring

Fixed diagram editing in xmlclass refactoring

Merged

Second stage of xmlclass refactoring using lxml , project are loaded and displayed successfully

First stage of xmlclass refactoring using lxml

Fixed bug in resource pou instance program type selection

Fixed two typos in py_ext : FBID was not current but previous py_eval block FBID, and compiled AST cache was filled buy never used.

Fixed bug when adding a block in Viewer

Fixed bug when displaying Master generated Object Dictionary in canfestival extension

Fixed bug when no connection defined for connectionPointIn

Fixed GetBlockTypes method

More optimization attemps in type handling

Added support for left panel add menu with multiple levels

Various cleanup and optimization
- Deleted shameful dead code here and here...
- Accelerated creation of GenBitmap*Button adding some caching for bitmap grayOut
- Replaced lists inside type use dictionary by sets
- Prevented useless type usage checking when unnecessary

RC4

Added 'dlopen_prefix' class attributes to targets, in order to handle dlopen of shared object passed to runtime as extra file, and then in PWD (was working with windows only)

CanFestival plugin fills master's DCF to prepare PDO mappings in a way conform to DSP-301

Fixed refresh bug when activating element in instance variables list

Fixed bug instance choice list empty for standard and extension functions block types

Fixed DurationCellEditor to make it reusable

Fix bug when opening specific file editor

Fix refresh bug when scrolling Viewer while dragging graphic element or rubberband

Fixed bug when open editor while Build is working

Fix bug when transferring PLC and orthogonal graph is displayed with cursor

Fix bug when LogException handler

Fix bug in atty function of LogPseudoFile

Fix bug when exporting string variables values in graph to clipboard

Added support for zooming graph so that it fits canvas size in Debug Variable Panel

Fixed bug when removing obsolete variables from Debug Variable Panel

Fix bug in graphic viewer height when drag'n dropping variable in parallel mode

Fixed bugs in Debug Variable Panel

Added support for replacing a wire by two connections

Fixed bug with Copy/Paste in generated ST code Viewer

Fixed bug in support for speed up loading graphic viewers

Fixed bug when adding block into Viewer and added wire validity after adding block with wire drop support

Added support for adding graphic element when dropping wire in midair

Fixed move of LD_PowerRail and SFC_Divergence connectors using Right button

Fixed bug VariablePanel and ProjectProperties not refreshed in ProjectNodeEditor

Fixed bug in wxGlade extension when compiling and starting project with no hmi defined

Fixed bug forced debug variable not released when unsubscribed and re-subscribed while PLC is stopped

Fixed bug when trying to add a global function block instance variable to debug variable panel and not connected

Fixed bug when centering element in Preview panel

Rewrite SFCTransitionDialog

Rewrite SFCDivergenceDialog

Rewrite SFCStepDialog and factorize code for creating common dialog sizers

Rewrite LDPowerRailDialog

Fixed bug FBD variable execution not set when newly created

Fixed bug in newly rewritten dialogs

Rewrite LDElementDialog

Rewrite ConnectionDialog

Rewrite FBDVariableDialog

Fixed bug when drag'n dropping POU from project tree and POU is selected

Rewrite FBDBlockDialog and BlockPreviewDialog

Add support for scaling preview if block is too big

Fixed bug when drag'n dropping POU from project tree, POU editor is selected if open

Fixed bug when generating ST code and connection is broken in POU using graphical language

Fixed bug with InstanceChoice values in PouInstanceVariablesPanel

Fixed support for default function block name in FBDBlockDialog

Added support for default function block name in FBDBlockDialog

Fixed bug when searching in LibraryPanel on Windows

Fixed bug in support for speed up loading graphic viewers

Fixed bugs in refresh of PouInstanceVariablesPanel

Added support for speed up loading graphic viewers

Fixed bug when exporting variables data

Fixed and rewrite LibraryPanel

Fixed typo in Viewer

Fixed ToolTip in Viewer

Fixed tick not refreshed when in DebugVariablePanel when variable in it

Fixed lag when selecting all elements using CTRL+A or after paste a lot of blocks

Fixed removing display of wire point in debug Viewer

Fixed lag when moving mouse over Viewer

Fixed bug when adding standard function like ADD, SUB, MUL,... that are overloaded. Block type was not selected and shown when opening FBDBlockDialog to edit it.

Fixed flickering and lag when refreshing PouInstanceVariablesPanel

Fix ToolTip on Windows

Fixed in DebugDataConsumer value translation inhibit support

Fixed bug when editing file name and close editor without modification

Fixed bug when moving debug viewers

Fixed bug when moving TextViewer and replacing right click by double click when adding graph in Debug Variable Panel

Fixed bug in DebugVariablePanel on Windows

Rewrite DebugVariablePanel

Added support for opening text viewer by default and toggling between GraphicViewer and TextViewer

Fixed bug when scroll in and out using wheel mouse in graph, range of data displayed could be out of bounds of whole data stored range

Rewrite DebugVariablePanel

Fixed bug when launching Beremiz with a wrong project path

Fixed bug when closing debug tab or beremiz frame with variable debugged and PLC is running

Rewrite DebugVariablePanel and fixed bugs

Fixed support for drawing instance path at a fixed position in Viewer debug mode on Windows

Rewrite DebugVariableTablePanel

Fixed bug when closing graph in Debug Variable Panel

Fixed bug Viewer not refreshed when debugging

Fixed support for drawing instance path at a fixed position in Viewer debug mode on Windows

Added support for drawing instance path at a fixed position in Viewer debug mode

Fixed bug when export all items values to clipboard in DebugVariablePanel

Fixed bug Viewer not refreshed when debugging

Splitted DebugVariableGraphicPanel.py into several files

Move GraphButton from DebugVariableGraphicPanel to separate file

Separated old table debug variable panel and new graphic debug variable panel

Fixed bug in when deleting row in CustomGrid

Fixed bug in when deleting row in CustomGrid

Fixed bug when collecting log messages from connector history for LogViewer

Fixed bug with moving cursor with keyboard in DebugVariablePanel

Moved and start to rewrite DebugVariablePanel splitting it into multiple files

Fixed bugs in DebugVariablePanel with ticktime modifications

Fixed values in DebugVariablePanel range selection ComboBox

Fixed bug keyboard events not catch by graphs when trying to move cursor on Windows

Fixed bug in PouInstanceVariablesPanel, exploring child FunctionBlock variables if no instance selected

Fixed bug two icons displayed for POU category item in Project Tree when adding a second POU

Removed test that expression is not a keyword in FBDVariableDialog

Fixed bug when copy/paste element containing unicode characters

Updated wiimote example. Now include nunchuck accel, and buttons are on 16bits

Fixed non-tested bad code in VariablePanel

Fixed bug in PLC code generated with binary, octal and hexadecimal literals

Improved FBDVariable dialog

Fixed bug in PLC code generated with binary, octal and hexadecimal literals

Fixed bugs with TextCtrlAutoComplete

Fixed inconsistency in value display when setting integer value for float parameter

Fixed search highlight bug in ST and Code text editors

Fixed typo

Moved and rewrote DebugViewer and DebusDataConsumer classes

Fixed bug when adding a variable in Variable Panel and selected variable can't be edited (generally a FB)

Add support for moving cursor in Debug Graphs using arrow keys

Move RubberBand from GraphicCommons to individual file

Fixed CustomToolTip

Add support for Drag'n dropping located variables to function block creating global located variable in configuration and external variable in function block

Added support for displaying ToolTip, starting drag'n drop and Double click on Block connectors when debugging

Move CustomToolTip from GraphicCommons to controls

Merged

Fixed bug ProjectTree items label can't be edited

Added support for displaying value of unconnected block connectors in debug

Fixed bugs with left panel CustomTreeCtrl on Windows

Added extra icon in left panel tree for indicating Pou type (function, functionBlock, or program) when alone

Added icon for wxGlade_hmi extension editor

Fixed ConfTreeNodeEditor background colour

Moved CodeFileEditor Variable Panel button to grid left

Fixed GCC warnings when building stub code for python PLC globals access

Fixed bug tabs selected cyclically when drag'n dropping variable into Editor

Fixed bug tabs selected cyclically when drag'n dropping variable into Editor

Added wiimote input example using python-cwiid and python PLC global variable access

Added more clear error message in case of access to non declared PLC global from python code

Extended WxGlade HMI with automatic mapping of event handlers declared in wxglade editor

Fixed build error with python <-> PLCglobals variables declared with no initial value

Fixed bug in New variable name generated in CodeFileEditor Variable Panel

Fixed bug scrollbar not displayed in CodeFileEditor VariablePanel when grid is to small to show all variables

Fixed bug wxGlade hmi not closed when stopping PLC

Fixed bug when typing and caret is at last test position in CodeFileEditor

Fixed bug in ST code generator with extensible standard functions

Fixed bug when generating py_ext code when no variable defined

Merged

Fixed variable panel in CodeFileEditor

Fixed PLC global var access from python. Added test in tests/python

Added stub code and declarations for bidirectional access to PLC globals from python code (untested)

Fixed bug in ST code generator when function output variable has no name

Fixed functions used by one or more POU not showing question dialog when trying to delete

Fixed bug connection disappear when removing variable from interface of an already used POU

Fixed bug when drag'n dropping global in function variable panel (not possible according to standard)

Fixed bug when deleting line between code and headers on Windows

Replaced the 2 tabs variable and code in CodeFileEditor by only one type with SplitterWindow and fixed drag'n drop of variable from variable to code.

Merged

Added global variable names in CodeFileEditor auto-completion list

Added support for updating model when broken connection is detected in Viewer

Fixed PLC code generator when interface of an already used POU has changed

Fixed bug in loading block in Viewer when block interface has changed

Rewrote py_ext and wxglade generators in a clean factored way, added C skeleton for python access to PLC global vars

Fixed bug in wxGlade hmi python code generated

Fixed loading of Blocks in Viewer when block interface have changed

Removed restriction on deletion of a POU or DataType already used, replaced by a dialog asking user to confirm

Removed restriction on POU interface variables modification when POU is already used

Fixed bug when generating new name for configuration and resource variable in VariablePanel

Fixed bug with Copy/Paste in Primary Selection in Text Viewers

Updated python example

Fixed support for defining python runtime code using sections like in c_ext

Fixed bug on biggest Viewer zoom factor preventing them to be used on Windows

Adding support for using current selected variable for generate newly added variable informations in VariablePanel

Fixed Beremiz_service not closing on Windows

Removed some prints for code debugging

Fixed generated code in c_ext file

Fixed generated code in py_ext runtime file

Fixed CodeFileEditor allowing to have no line of code between two section headers

Fixed bug connector not resetted when connection is lost

Fixed bug in CodeFileEditor allowing to remove NEWLINE character between section header and section code

Fixed bug in generated code in c_ext file

Fixed bug in generated code in py_ext runtime file

Fixed bug when selecting item in ProjectTree on Linux

Fixed bug when changing IEC_Channel of node without params

Fixed code section headers in CodeFileEditor

Fix bug when section code is just an empty line

Fix bug with multiline Pragma syntax highlighting in TextViewer

Fixed Drag'n dropping from PouInstanceVariablesPanel ensuring DebugVariablePanel is visible before starting drag'n drop

Added tooltip in ProjectTree when mouse over POU

Fixed bug when modifying ConfTreeNode IEC Channel

Added support for excluding code section headers to be modified in CodeFileEditor

Fixed python global variable declaration example in generated runtime python file

Fixed bug with debugging global variables

Fixed search in CodeFileEditor STC panel

Added support for compatibility with older version of c_ext

Updated python test

Fixed bug when pressing Return key in FindInPouDialog

Fixed Python editor adding variable panel

Fixed CFileEditor replacing folding panels by variable panel and STC

Move C_ext file for merging with py_ext

Fixed bug in LogViewer layout

Added support for resetting log messages

Fixed bugs in CustomStyledTextCtrl

Fixed bug with margin cursor in StyledTextCtrl on Windows

Fixed bug when closing Beremiz frame

Fixed bug when transferring program and a output located variable is forced

Fixed bug when closing Beremiz frame

Fixed bug when closing Beremiz frame

Fixed warnings in python test

Removed call of deprecated function on wxSplitterWindow

Fixed bug in DebugVariablePanel, cursor not reset when graphs were reset

Added support for adding a variable in program VariablePanel by drap'n dropping located variable like in global VariablePanel

Fixed bug in PouInstanceVariablesPanel buttons tooltips

Fixed bug when quitting project with more than one LD Viewer opened

Fixed bug list of ConfNodes blocks not refreshed when a library was enable or disable

Fixed bug in LogViewer when no Log Messages are available when first SetLogCounters

Fixed wrong default value for xsd:positiveInteger and xsd:negativeInteger in xmlclass

Fixed bug in LogViewer in Log Messages to retrieve index calculation when first SetLogCounters

Fixed bug in displayed datetime, using local timezone instead of UTC

Now Debug Buffer Unpacking is a separate function, declared in typemapping.py

Optimzed tracing of STRING type variables value. Now, only used size is transfered in debug buffer.

chmod +x PLCOpenEditor.py

Fixed retrieve and publish call order in PLC generated code

Fixed bug in LogViewer when view is filtered and displaying last message and new messages appears

Added exception printing on Pyro connector, tracking random connection failure...

Fixed refresh bugs when drag'n dropping of group of elements

Modify search algorithm in LibraryPanel to search match in whole block name, not only at beginning

Added exception hook to Beremiz_service, so that exception go in PLC log. Extended Beremiz.py exception hook to threads. Stripped images embedded in Beremiz_service.py, user real images instead.

Fixed bug in CFileEditor

Removed undeleted debug print

Fixed bug Show IEC code button not available

Fixed bug in Save function in Beremiz

Merged

Fixed Save As... function in Beremiz

Fixed unexpected scrolling when PythonEditor, TextViewer and CFileEditor get focus

Fixed new ConfTreeNodeEditor layout on Windows

Fixed PythonEditor font size

Added support for search in PythonEditor and IECCodeViewer

Fixed pattern textctrl in FindInPouDialog to get focus when dialog appear

Fixed ConfTreeNodeEditor layout

Fixed connections of block when changing block type

Fixed error when stopping PLC with wxglade HMI

Better display of Python exceptions from Py_Eval

Extended exception info from evaluator. Problems in python runtime init/cleanup code now more readable

Made declaration from beremiz.h available to C pragmas in POUs. Added AtomicCompareExchange to beremiz.h

Fixed inspector

Fixed bug in program elements computation order in PLCGenerator

Fixed bug when using 'Adjust Block Size' contextual menu item on a group of selected elements

Fixed bug Beremiz_service process not stopped when quitting

Runtime now unloads and cleanup PLC before exit (created threads was preventing exit)

Fixed bugs in DebugVariablePanel

Fixed bug in graph panel default size in DebugVariablePanel

Fixed refresh bug when moving selected elements

Fixed graph panel size when modifying DebugVariablePanel layout

Fixed MouseWheel behavior in DebugVariablePanel, change graph range only if CTRL is pressed

Fixed bug when right click on ProjectTree project item

Fixed bug when right click on ProjectTree project item