Tue, 24 Sep 2019 11:55:59 +0200Fixed unitialized parameter in instances_path stylesheet, leading to
Edouard Tisserant [Tue, 24 Sep 2019 11:55:59 +0200] rev 2626
Fixed unitialized parameter in instances_path stylesheet, leading to
calls to add_instance with no data when passing datatypes insteatd of project
root. That bug was making exceptions (for exemple when editing type) when
having arrays of derivated types in project.

Sun, 14 Jul 2019 08:43:12 +0200Fixed code quality according to pep8 and pylint.
Edouard Tisserant <edouard.tisserant@gmail.com> [Sun, 14 Jul 2019 08:43:12 +0200] rev 2625
Fixed code quality according to pep8 and pylint.

Sat, 13 Jul 2019 10:57:25 +0200Fix exception on exit in some case, sequel of an earlier cleanup commit I couldn't find back. Disconnecting the event is apparently the way to go. https://wiki.wxpython.org/Surviving%20with%20wxEVT%20KILL%20FOCUS%20under%20Microsoft%20Windows
Edouard Tisserant <edouard.tisserant@gmail.com> [Sat, 13 Jul 2019 10:57:25 +0200] rev 2624
Fix exception on exit in some case, sequel of an earlier cleanup commit I couldn't find back. Disconnecting the event is apparently the way to go. https://wiki.wxpython.org/Surviving%20with%20wxEVT%20KILL%20FOCUS%20under%20Microsoft%20Windows

Fri, 12 Jul 2019 11:53:04 +0200PurgeBlobs was faulty, but it was never having anything to purge. Fixed.
Edouard Tisserant [Fri, 12 Jul 2019 11:53:04 +0200] rev 2623
PurgeBlobs was faulty, but it was never having anything to purge. Fixed.

Fri, 12 Jul 2019 11:51:47 +0200Fixed repetitive freezing of IDE when connection drops.
Edouard Tisserant [Fri, 12 Jul 2019 11:51:47 +0200] rev 2622
Fixed repetitive freezing of IDE when connection drops.
when connection lost error was beeing displayed, the involved wxYield
was calling pending plc status periodic update, itself trying to use connector.
At that time connector is still not destroyed and connection
is attempted again when calling GetPLCStatus.
=> Hack : Ensure connector is destroyed before reporting error.

Wed, 10 Jul 2019 11:21:13 +0200Better error handling when blob transfer fail
Edouard Tisserant [Wed, 10 Jul 2019 11:21:13 +0200] rev 2621
Better error handling when blob transfer fail

Wed, 10 Jul 2019 10:43:14 +0200Removed dead code.
Edouard Tisserant [Wed, 10 Jul 2019 10:43:14 +0200] rev 2620
Removed dead code.

Tue, 09 Jul 2019 09:49:30 +0200Now expects 1 more columns in VARIABLE.CSV file generated by MatIEC. Pair with MatIEC commit 9cb7c8bf7dbc :
Edouard Tisserant [Tue, 09 Jul 2019 09:49:30 +0200] rev 2619
Now expects 1 more columns in VARIABLE.CSV file generated by MatIEC. Pair with MatIEC commit 9cb7c8bf7dbc :
Add a column to VARIABLES.CSV, containing variable (derived) type name, additionally to current last column contyaining base type name

Tue, 18 Jun 2019 14:09:23 +0200Merged workaround for loading bug happening after automatic resize of function blocks. It appears that some code in GraphicCommons.py loop endlessly when wires coordinate do not align with x or y axis. Those erroneous coordinate are now filtered out when loaded in the view.
Edouard Tisserant [Tue, 18 Jun 2019 14:09:23 +0200] rev 2618
Merged workaround for loading bug happening after automatic resize of function blocks. It appears that some code in GraphicCommons.py loop endlessly when wires coordinate do not align with x or y axis. Those erroneous coordinate are now filtered out when loaded in the view.

Tue, 18 Jun 2019 14:03:08 +0200Removed debug code and closed branch fix_fb_resize_wire_bug
Edouard Tisserant [Tue, 18 Jun 2019 14:03:08 +0200] rev 2617
Removed debug code and closed branch

Tue, 18 Jun 2019 13:58:45 +0200GraphicCommons.py : Wire.SetPoints() move filtering before computation of Start and End points to avoid setting them with arbitrary directions. fix_fb_resize_wire_bug
Edouard Tisserant [Tue, 18 Jun 2019 13:58:45 +0200] rev 2616
GraphicCommons.py : Wire.SetPoints() move filtering before computation of Start and End points to avoid setting them with arbitrary directions.

Tue, 18 Jun 2019 09:38:20 +0200GraphicCommons.py : rewrote Wire.Setpoints. fix_fb_resize_wire_bug
Edouard Tisserant [Tue, 18 Jun 2019 09:38:20 +0200] rev 2615
GraphicCommons.py : rewrote Wire.Setpoints.
- trying to make it fix diagonal wires,
- wasn't clear what was intended before, so made it clear :
- duplicate point removal
- segment merging (only if asked)
- remove corners made of opposite direction segments

Thu, 13 Jun 2019 15:49:48 +0200'Change POU Type To' becomes 'Duplicate as...', avoiding side effects of type change when POU is already instanciated. Also remove leftover returType tag in ex-function POUs, triggering exceptions at build time.
Edouard Tisserant [Thu, 13 Jun 2019 15:49:48 +0200] rev 2614
'Change POU Type To' becomes 'Duplicate as...', avoiding side effects of type change when POU is already instanciated. Also remove leftover returType tag in ex-function POUs, triggering exceptions at build time.

Thu, 06 Jun 2019 14:03:16 +0200Fix PLCObject's purge failing silently with extra_files.
Edouard Tisserant [Thu, 06 Jun 2019 14:03:16 +0200] rev 2613
Fix PLCObject's purge failing silently with extra_files.

Thu, 30 May 2019 11:53:13 +0200LogMessage shouldn't be serialized (can lead to blocking in case of exception in main thread), and do not require it.
Edouard Tisserant [Thu, 30 May 2019 11:53:13 +0200] rev 2612
LogMessage shouldn't be serialized (can lead to blocking in case of exception in main thread), and do not require it.

Thu, 30 May 2019 11:51:56 +0200Fixed typo leading to some exception in some rare corner cases in worker.py
Edouard Tisserant [Thu, 30 May 2019 11:51:56 +0200] rev 2611
Fixed typo leading to some exception in some rare corner cases in worker.py

Tue, 23 Apr 2019 11:01:35 +0200Added missing 'path' field to WAMP addresses in URI editor.
Edouard Tisserant [Tue, 23 Apr 2019 11:01:35 +0200] rev 2610
Added missing 'path' field to WAMP addresses in URI editor.

Tue, 23 Apr 2019 11:00:37 +0200Fixed exception when using URI editor for PYRO addresses
Edouard Tisserant [Tue, 23 Apr 2019 11:00:37 +0200] rev 2609
Fixed exception when using URI editor for PYRO addresses

Fri, 19 Apr 2019 13:11:42 +0200Avoid loading PLC at startup when autostart is not set in command line. As a side effect PLC status is artificially set to Stopped, and StartPLC eventually loads PLC if it is not already loaded.
Edouard Tisserant [Fri, 19 Apr 2019 13:11:42 +0200] rev 2608
Avoid loading PLC at startup when autostart is not set in command line. As a side effect PLC status is artificially set to Stopped, and StartPLC eventually loads PLC if it is not already loaded.

Fri, 19 Apr 2019 10:53:02 +0200Add Repair() to WAMP interface
Edouard Tisserant [Fri, 19 Apr 2019 10:53:02 +0200] rev 2607
Add Repair() to WAMP interface

Thu, 18 Apr 2019 14:42:23 +0200Merged fix_PLC_runtime_shutdown
Edouard Tisserant [Thu, 18 Apr 2019 14:42:23 +0200] rev 2606
Merged fix_PLC_runtime_shutdown

Thu, 18 Apr 2019 14:41:21 +0200Close fix_PLC_runtime_shutdown fix_PLC_runtime_shutdown
Edouard Tisserant [Thu, 18 Apr 2019 14:41:21 +0200] rev 2605
Close fix_PLC_runtime_shutdown

Thu, 18 Apr 2019 14:35:42 +0200Runtime worker : unblock the last waiting job and prevent any new job to wait when Main Worker is being shut down. fix_PLC_runtime_shutdown
Edouard Tisserant [Thu, 18 Apr 2019 14:35:42 +0200] rev 2604
Runtime worker : unblock the last waiting job and prevent any new job to wait when Main Worker is being shut down.

Thu, 18 Apr 2019 14:34:22 +0200Add some "pipe to self" trick in Pyro server to accelerate runtime shutdown instead of waiting for arbitrary pyro timeout. fix_PLC_runtime_shutdown
Edouard Tisserant [Thu, 18 Apr 2019 14:34:22 +0200] rev 2603
Add some "pipe to self" trick in Pyro server to accelerate runtime shutdown instead of waiting for arbitrary pyro timeout.

Thu, 18 Apr 2019 14:32:43 +0200If call to GetPLCstatus can't be executed in PLC, then obtained status is disconnected. Status on "None" is not relevant anymore, and is replaced by Disconnected. fix_PLC_runtime_shutdown
Edouard Tisserant [Thu, 18 Apr 2019 14:32:43 +0200] rev 2602
If call to GetPLCstatus can't be executed in PLC, then obtained status is disconnected. Status on "None" is not relevant anymore, and is replaced by Disconnected.

Thu, 18 Apr 2019 14:29:55 +0200Enure that all threads are joined before trying to exit fix_PLC_runtime_shutdown
Edouard Tisserant [Thu, 18 Apr 2019 14:29:55 +0200] rev 2601
Enure that all threads are joined before trying to exit

Wed, 17 Apr 2019 14:18:22 +0200Named runtime's threads to ease debugging
Edouard Tisserant [Wed, 17 Apr 2019 14:18:22 +0200] rev 2600
Named runtime's threads to ease debugging

Wed, 17 Apr 2019 14:15:39 +0200Added Repair() png icon
Edouard Tisserant [Wed, 17 Apr 2019 14:15:39 +0200] rev 2599
Added Repair() png icon

Tue, 16 Apr 2019 14:45:41 +0200pep8 again...
Edouard Tisserant <edouard.tisserant@gmail.com> [Tue, 16 Apr 2019 14:45:41 +0200] rev 2598
pep8 again...
./connectors/PYRO/PSK_Adapter.py:49:1: E302 expected 2 blank lines, found 1
./connectors/PYRO/PSK_Adapter.py:57:5: E303 too many blank lines (2)

Tue, 16 Apr 2019 13:32:32 +0200PEP8 fix : ./connectors/PYRO/PSK_Adapter.py:49:1: E302 expected 2 blank lines, found 1
Edouard Tisserant <edouard.tisserant@gmail.com> [Tue, 16 Apr 2019 13:32:32 +0200] rev 2597
PEP8 fix : ./connectors/PYRO/PSK_Adapter.py:49:1: E302 expected 2 blank lines, found 1

Tue, 16 Apr 2019 11:26:52 +0200Added RepairPLC() to PLCObject. For now just calling PurgePLC and quit PLC runtime.
Edouard Tisserant [Tue, 16 Apr 2019 11:26:52 +0200] rev 2596
Added RepairPLC() to PLCObject. For now just calling PurgePLC and quit PLC runtime.

Tue, 16 Apr 2019 11:26:34 +0200Ensure Beremiz_service.py quits properly when Main Worker stops and wa are using Wx and/or Twisted.
Edouard Tisserant [Tue, 16 Apr 2019 11:26:34 +0200] rev 2595
Ensure Beremiz_service.py quits properly when Main Worker stops and wa are using Wx and/or Twisted.

Mon, 15 Apr 2019 13:34:09 +0200Added PurgePLC() method to PLCObject, to be invoked when PLC Status is broken. It clears PLC shared object an extra files and force status to Empty. Added correponding Repair button to toolbar, visible only when PLC status is broken.
Edouard Tisserant [Mon, 15 Apr 2019 13:34:09 +0200] rev 2594
Added PurgePLC() method to PLCObject, to be invoked when PLC Status is broken. It clears PLC shared object an extra files and force status to Empty. Added correponding Repair button to toolbar, visible only when PLC status is broken.

Thu, 11 Apr 2019 13:45:27 +0200Background erase of debug variable panel was disabled for some reason, and it not anymore compatible with EVT_PAINT based refresh. It was leaving traces behind when removing traced variable. Fixed.
Edouard Tisserant [Thu, 11 Apr 2019 13:45:27 +0200] rev 2593
Background erase of debug variable panel was disabled for some reason, and it not anymore compatible with EVT_PAINT based refresh. It was leaving traces behind when removing traced variable. Fixed.

Thu, 11 Apr 2019 13:41:52 +0200force redraw only through EVT_PAINT event and use wxPaintDC, as described in wx documentation
Edouard Tisserant [Thu, 11 Apr 2019 13:41:52 +0200] rev 2592
force redraw only through EVT_PAINT event and use wxPaintDC, as described in wx documentation

Thu, 11 Apr 2019 11:26:47 +0200Fixed refresh problem following 9c5f835b031e, 9622418ac28c, c67488bd8134 : force redraw only through EVT_PAINT event and use wxPaintDC, as described in wx documentation
Edouard Tisserant [Thu, 11 Apr 2019 11:26:47 +0200] rev 2591
Fixed refresh problem following 9c5f835b031e, 9622418ac28c, c67488bd8134 : force redraw only through EVT_PAINT event and use wxPaintDC, as described in wx documentation

Thu, 11 Apr 2019 08:40:17 +0200merged
Edouard Tisserant <edouard.tisserant@gmail.com> [Thu, 11 Apr 2019 08:40:17 +0200] rev 2590
merged

Wed, 10 Apr 2019 14:11:52 +0200Nicer name than 'var_name' for variable auto-renaming in Modbus
Edouard Tisserant [Wed, 10 Apr 2019 14:11:52 +0200] rev 2589
Nicer name than 'var_name' for variable auto-renaming in Modbus

Wed, 10 Apr 2019 21:36:12 +0200Allow starting IDE without sslpsk module installed. Fail when connecting to PYROS if sslpsk unavailable.
Edouard Tisserant <edouard.tisserant@gmail.com> [Wed, 10 Apr 2019 21:36:12 +0200] rev 2588
Allow starting IDE without sslpsk module installed. Fail when connecting to PYROS if sslpsk unavailable.

Tue, 09 Apr 2019 14:08:44 +0200Fixed preview drawing/refresh problem in sfc/ld/fbd graphical element creation dialogs on windows (introduced in 9c5f835b031e, continuation of 9622418ac28c)
Edouard Tisserant [Tue, 09 Apr 2019 14:08:44 +0200] rev 2587
Fixed preview drawing/refresh problem in sfc/ld/fbd graphical element creation dialogs on windows (introduced in 9c5f835b031e, continuation of 9622418ac28c)

Tue, 09 Apr 2019 13:18:51 +0200pep8 white spaces
Edouard Tisserant [Tue, 09 Apr 2019 13:18:51 +0200] rev 2586
pep8 white spaces

Tue, 09 Apr 2019 13:13:27 +0200Now default_evaluator is provided by runtime package
Edouard Tisserant [Tue, 09 Apr 2019 13:13:27 +0200] rev 2585
Now default_evaluator is provided by runtime package

Tue, 09 Apr 2019 13:08:03 +0200merge
Edouard Tisserant <edouard.tisserant@gmail.com> [Tue, 09 Apr 2019 13:08:03 +0200] rev 2584
merge

Tue, 09 Apr 2019 13:05:35 +0200Continue fixing deadlock of previous commit, this time occuring when waiting for 'cleanup' python runtime call to finish. Now 'init' and 'cleanup' python runtime calls are called directly from main thread, and aren't anymore invoked in the context of wxMainloop and/or twisted reactor.
Edouard Tisserant [Tue, 09 Apr 2019 13:05:35 +0200] rev 2583
Continue fixing deadlock of previous commit, this time occuring when waiting for 'cleanup' python runtime call to finish. Now 'init' and 'cleanup' python runtime calls are called directly from main thread, and aren't anymore invoked in the context of wxMainloop and/or twisted reactor.

Tue, 09 Apr 2019 09:13:55 +0200Fix deadlock when indirectly calling PLCObject's evaluator() from twisted of wx event loops. Was freezing while transfer/start/stop through Wamp. Serialize all PLCObject's call to self.PythonRuntimeCall into the same PythonThread thread.
Edouard Tisserant [Tue, 09 Apr 2019 09:13:55 +0200] rev 2582
Fix deadlock when indirectly calling PLCObject's evaluator() from twisted of wx event loops. Was freezing while transfer/start/stop through Wamp. Serialize all PLCObject's call to self.PythonRuntimeCall into the same PythonThread thread.

Mon, 08 Apr 2019 12:53:18 +0200Fixed Wamp assertion because of unexpected type
Edouard Tisserant [Mon, 08 Apr 2019 12:53:18 +0200] rev 2581
Fixed Wamp assertion because of unexpected type

Thu, 28 Mar 2019 13:09:11 +0100Enhanced statistics display code, used it and saw no more noticable leak while editing. Closing branch. wx.NewID_abuse_fix
Edouard Tisserant [Thu, 28 Mar 2019 13:09:11 +0100] rev 2580
Enhanced statistics display code, used it and saw no more noticable leak while editing. Closing branch.

Sun, 07 Apr 2019 21:08:07 +0200Conform to pep8 and pylint :
Edouard Tisserant <edouard.tisserant@gmail.com> [Sun, 07 Apr 2019 21:08:07 +0200] rev 2579
Conform to pep8 and pylint :

pep8 version: 2.3.1
./ConfigTreeNode.py:130:49: E231 missing whitespace after ','
./editors/Viewer.py:643:24: E128 continuation line under-indented for visual indent
./editors/Viewer.py:670:12: E221 multiple spaces before operator
./editors/Viewer.py:671:13: E221 multiple spaces before operator
./editors/Viewer.py:2138:52: E203 whitespace before ':'
./editors/Viewer.py:2139:66: W291 trailing whitespace
./controls/VariablePanel.py:154:25: E231 missing whitespace after ','
./controls/LocationCellEditor.py:88:1: W293 blank line contains whitespace
./controls/LocationCellEditor.py:191:25: E221 multiple spaces before operator
./controls/LocationCellEditor.py:200:17: E128 continuation line under-indented for visual indent

pylint 1.8.3,
************* Module controls.LocationCellEditor
controls/LocationCellEditor.py:200: [C0330(bad-continuation), ] Wrong continued indentation (add 9 spaces).
_("Selected location is identical to previous one"))
^ |
************* Module controls.VariablePanel
controls/VariablePanel.py:154: [E1601(print-statement), VariableTable.SetValue] print statement used
************* Module editors.Viewer
editors/Viewer.py:643: [C0330(bad-continuation), ] Wrong continued indentation (add 1 space).
self.GetAddMenuCallBack(self.AddNewComment))
^|
editors/Viewer.py:598: [W0612(unused-variable), Viewer.AddDivergenceMenuItems] Unused variable 'add_branch'
editors/Viewer.py:1655: [E0602(undefined-variable), Viewer.PopupConnectionMenu] Undefined variable 'variable_type'
editors/Viewer.py:1649: [W0612(unused-variable), Viewer.PopupConnectionMenu] Unused variable 'connection_type'
************* Module connectors.PYRO.PSK_Adapter

Sun, 07 Apr 2019 16:23:49 +0200Merged
Edouard Tisserant <edouard.tisserant@gmail.com> [Sun, 07 Apr 2019 16:23:49 +0200] rev 2578
Merged

Wed, 03 Apr 2019 06:31:34 +0000Fix typo in README.md
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 03 Apr 2019 06:31:34 +0000] rev 2577
Fix typo in README.md

Closes #80

Thu, 04 Apr 2019 14:00:17 +0200merged rename_on_location_change branch
Edouard Tisserant [Thu, 04 Apr 2019 14:00:17 +0200] rev 2576
merged rename_on_location_change branch

Thu, 04 Apr 2019 13:59:22 +0200Rename checkbox and immediately apply. rename_on_location_change
Edouard Tisserant [Thu, 04 Apr 2019 13:59:22 +0200] rev 2575
Rename checkbox and immediately apply.
Added a checkbox in Location selection dialog (saved as user settings) to let user choose if variable is being renamed.
Also forced closing celle editor once new location is selected.

Wed, 03 Apr 2019 13:20:28 +0200LocationCellEditor use better source for variable name replacement, and validate variable name before applying it or complains otherwise. rename_on_location_change
Edouard Tisserant [Wed, 03 Apr 2019 13:20:28 +0200] rev 2574
LocationCellEditor use better source for variable name replacement, and validate variable name before applying it or complains otherwise.

Tue, 02 Apr 2019 09:46:58 +0200LocationCellEditor now systematically change variable name according to name given by CTN, calls VariablePanel' OnVariableNameChange to update POU accordingly. rename_on_location_change
Edouard Tisserant [Tue, 02 Apr 2019 09:46:58 +0200] rev 2573
LocationCellEditor now systematically change variable name according to name given by CTN, calls VariablePanel' OnVariableNameChange to update POU accordingly.

Thu, 28 Mar 2019 14:06:53 +0100Fix problem introduced in 9c5f835b031e : Exception in LDPowerRailDialog.py because of change in OnPaint/RefreshView/DrawPreview.
Edouard Tisserant [Thu, 28 Mar 2019 14:06:53 +0100] rev 2572
Fix problem introduced in 9c5f835b031e : Exception in LDPowerRailDialog.py because of change in OnPaint/RefreshView/DrawPreview.

Thu, 28 Mar 2019 13:39:58 +0100Fixed RecentProjectMenu in BeremizIDE.py broken by untested changes in wx.NewID_abuse_fix.
Edouard Tisserant [Thu, 28 Mar 2019 13:39:58 +0100] rev 2571
Fixed RecentProjectMenu in BeremizIDE.py broken by untested changes in wx.NewID_abuse_fix.

Thu, 28 Mar 2019 13:10:26 +0100Merged wx.NewID_abuse_fix branch
Edouard Tisserant [Thu, 28 Mar 2019 13:10:26 +0100] rev 2570
Merged wx.NewID_abuse_fix branch

Thu, 28 Mar 2019 13:08:20 +0100More wx.NewID abuse removal. This time BeremizIDE.py was cleaned. wx.NewID_abuse_fix
Edouard Tisserant [Thu, 28 Mar 2019 13:08:20 +0100] rev 2569
More wx.NewID abuse removal. This time BeremizIDE.py was cleaned.

Thu, 28 Mar 2019 09:19:30 +0100Merged more of wx.NewID_abuse_fix branch
Edouard Tisserant [Thu, 28 Mar 2019 09:19:30 +0100] rev 2568
Merged more of wx.NewID_abuse_fix branch

Wed, 27 Mar 2019 14:10:39 +0100More wx.NewID abuse removal. All Viewer.py got cured. wx.NewID_abuse_fix
Edouard Tisserant [Wed, 27 Mar 2019 14:10:39 +0100] rev 2567
More wx.NewID abuse removal. All Viewer.py got cured.

Wed, 27 Mar 2019 13:08:51 +0100More wx.NewID abuse removal. This one was apparently silently unbinding toolbar butons when running out of mew wx IDs. wx.NewID_abuse_fix
Edouard Tisserant [Wed, 27 Mar 2019 13:08:51 +0100] rev 2566
More wx.NewID abuse removal. This one was apparently silently unbinding toolbar butons when running out of mew wx IDs.

Tue, 26 Mar 2019 13:54:36 +0100Dyslectic typos
Edouard Tisserant [Tue, 26 Mar 2019 13:54:36 +0100] rev 2565
Dyslectic typos

Mon, 07 Jan 2019 20:32:40 +0000Close branch py3-fix. py3-fix
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 07 Jan 2019 20:32:40 +0000] rev 2564
Close branch py3-fix.

Thu, 27 Jul 2017 20:34:38 +0000Close branch 1.1 Korean release. 1.1 Korean release
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 27 Jul 2017 20:34:38 +0000] rev 2563
Close branch 1.1 Korean release.

Mon, 18 Mar 2019 09:12:44 +0000Close branch generate-button. generate-button
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 18 Mar 2019 09:12:44 +0000] rev 2562
Close branch generate-button.

Mon, 07 Jan 2019 23:55:05 +0300close #2486 head #2486
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 07 Jan 2019 23:55:05 +0300] rev 2561
close #2486 head

Mon, 07 Jan 2019 20:33:11 +0000Close branch nevow_service_rework. nevow_service_rework
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 07 Jan 2019 20:33:11 +0000] rev 2560
Close branch nevow_service_rework.

Mon, 07 Jan 2019 20:32:32 +0000Close branch wx3-fix. wx3-fix
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 07 Jan 2019 20:32:32 +0000] rev 2559
Close branch wx3-fix.

Tue, 26 Mar 2019 11:08:32 +0100Intermediate merge of wx.NewID_abuse_fix branch but kept debug code in the branch. This is still work in progress, banch is NOT closed.
Edouard Tisserant [Tue, 26 Mar 2019 11:08:32 +0100] rev 2558
Intermediate merge of wx.NewID_abuse_fix branch but kept debug code in the branch. This is still work in progress, banch is NOT closed.

Tue, 26 Mar 2019 11:03:57 +0100Continued wx.NewID abuse removal in Viewer.py : Added AppendItem to use instead of AppendMenu, made examples with AddBlockPinMenuItems and AddAlignmentMenuItems wx.NewID_abuse_fix
Edouard Tisserant [Tue, 26 Mar 2019 11:03:57 +0100] rev 2557
Continued wx.NewID abuse removal in Viewer.py : Added AppendItem to use instead of AppendMenu, made examples with AddBlockPinMenuItems and AddAlignmentMenuItems

Tue, 26 Mar 2019 09:43:51 +0100Continued wx.NewID abuse removal in Viewer.py : get rid of one call to AppendMenu method, having no real purpose apparently. To be continued. wx.NewID_abuse_fix
Edouard Tisserant [Tue, 26 Mar 2019 09:43:51 +0100] rev 2556
Continued wx.NewID abuse removal in Viewer.py : get rid of one call to AppendMenu method, having no real purpose apparently. To be continued.

Tue, 26 Mar 2019 09:41:09 +0100Start fixing wx.NewId abuse in viewer.py. This shows how to avoid using AppendMenu() function, definitely useless. wx.NewID_abuse_fix
Edouard Tisserant [Tue, 26 Mar 2019 09:41:09 +0100] rev 2555
Start fixing wx.NewId abuse in viewer.py. This shows how to avoid using AppendMenu() function, definitely useless.

Mon, 25 Mar 2019 14:59:54 +0100VariablePanel's menu do not waste Wx IDs anymore (directly binds wx objects rather than crating new ID wit wx.NewId) wx.NewID_abuse_fix
Edouard Tisserant [Mon, 25 Mar 2019 14:59:54 +0100] rev 2554
VariablePanel's menu do not waste Wx IDs anymore (directly binds wx objects rather than crating new ID wit wx.NewId)

Tue, 26 Mar 2019 09:48:45 +0100Instrument IDE code to find code abusing wx.NewId. wx.NewID_abuse_fix
Edouard Tisserant [Tue, 26 Mar 2019 09:48:45 +0100] rev 2553
Instrument IDE code to find code abusing wx.NewId.

Fri, 22 Mar 2019 14:00:35 +0100Fix error when searching accross project. Collection of result wasn't initialized and was failing in case some CTN was returning no result.
Edouard Tisserant [Fri, 22 Mar 2019 14:00:35 +0100] rev 2552
Fix error when searching accross project. Collection of result wasn't initialized and was failing in case some CTN was returning no result.

Fri, 22 Mar 2019 13:45:19 +0100Make spaghetti-code-quality great again.
Edouard Tisserant [Fri, 22 Mar 2019 13:45:19 +0100] rev 2551
Make spaghetti-code-quality great again.

Fri, 22 Mar 2019 13:26:31 +0100Merged
Edouard Tisserant [Fri, 22 Mar 2019 13:26:31 +0100] rev 2550
Merged

Mon, 18 Mar 2019 12:20:46 +0300Add Docker files to build containers to run automated tests
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 18 Mar 2019 12:20:46 +0300] rev 2549
Add Docker files to build containers to run automated tests

Mon, 18 Mar 2019 12:10:36 +0300merge
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 18 Mar 2019 12:10:36 +0300] rev 2548
merge

Mon, 18 Mar 2019 12:09:41 +0300check_source.sh: fix sed error: -e expression #1, char 25: Invalid range end
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 18 Mar 2019 12:09:41 +0300] rev 2547
check_source.sh: fix sed error: -e expression #1, char 25: Invalid range end

Warning happen only if old sed (4.4) is used.

Mon, 18 Mar 2019 12:07:49 +0300Fix pylint warning [C0325(superfluous-parens), ] Unnecessary parens after u'if' keyword
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 18 Mar 2019 12:07:49 +0300] rev 2546
Fix pylint warning [C0325(superfluous-parens), ] Unnecessary parens after u'if' keyword

************* Module runtime.PLCObject
runtime/PLCObject.py:609: [C0325(superfluous-parens), ] Unnecessary parens after u'if' keyword

Wed, 13 Mar 2019 15:58:34 +0300Update Beremiz dependencies because of added PYROS:// support
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 13 Mar 2019 15:58:34 +0300] rev 2545
Update Beremiz dependencies because of added PYROS:// support

Wed, 13 Mar 2019 15:54:17 +0300Fix header and convert comments to docstrings in PSK_Adapter
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 13 Mar 2019 15:54:17 +0300] rev 2544
Fix header and convert comments to docstrings in PSK_Adapter

Wed, 13 Mar 2019 15:43:45 +0300Fix Pyro work with SSL wrapper (sslpsk)
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 13 Mar 2019 15:43:45 +0300] rev 2543
Fix Pyro work with SSL wrapper (sslpsk)

Following error was shown in Beremiz console:
PYRO connecting to URI : PYROS://127.0.0.1:3001#beremiz
Exception while connecting to 'PYROS://127.0.0.1:3001#beremiz': non-zero flags not allowed in calls to recv() on <class 'ssl.SSLSocket'>
Connection failed to PYROS://127.0.0.1:3001#beremiz!

Reason is that Pyro calls socket recv() with MSGWAITALL flag, that causes ValueError exception.

https://docs.python.org/2/library/ssl.html
recv(), recv_into() (but passing a non-zero flags argument is not allowed)

Wed, 13 Mar 2019 14:27:24 +0300Fix crash in runtime if PSK secret is missing
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 13 Mar 2019 14:27:24 +0300] rev 2542
Fix crash in runtime if PSK secret is missing

./Beremiz_service.py -s $PWD/psk2.txt -n beremiz /tmp/beremiz
Beremiz_service: 1.2-1378c18402c3+

Traceback (most recent call last):
File "./Beremiz_service.py", line 511, in <module>
ensurePSK(servicename, PSKpath)
File "/home/developer/WorkData/PLC/beremiz/beremiz/runtime/Stunnel.py", line 32, in ensurePSK
PSKgen(ID, PSKpath)
File "/home/developer/WorkData/PLC/beremiz/beremiz/runtime/Stunnel.py", line 23, in PSKgen
call(restart_stunnel_cmdline)
File "/home/developer/WorkData/PLC/beremiz/beremiz/runtime/spawn_subprocess.py", line 116, in call
pid = posix_spawn.posix_spawnp(cmd[0], cmd)
File "/home/developer/.local/lib/python2.7/site-packages/posix_spawn/_impl.py", line 120, in posix_spawnp
return _posix_spawn(lib.posix_spawnp, *args, **kwargs)
File "/home/developer/.local/lib/python2.7/site-packages/posix_spawn/_impl.py", line 111, in _posix_spawn
_check_error(res, path)
File "/home/developer/.local/lib/python2.7/site-packages/posix_spawn/_impl.py", line 10, in _check_error
raise OSError(errno, os.strerror(errno), path)
OSError: [Errno 2] No such file or directory: '/etc/init.d/S50stunnel'

Wed, 13 Mar 2019 14:14:31 +0300Update build instruction for BACNet in README
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 13 Mar 2019 14:14:31 +0300] rev 2541
Update build instruction for BACNet in README

in r3189 Steve added new feature to bacnet-stack: network port - to
access configuration and properties of network ports of a device.
https://sourceforge.net/p/bacnet/code/3189/

It's not implemented by Beremiz.

Wed, 13 Mar 2019 14:11:13 +0300Replace md5 module with hashlib
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 13 Mar 2019 14:11:13 +0300] rev 2540
Replace md5 module with hashlib

fix following pylint error:

************* Module connectors.ConnectorBase
connectors/ConnectorBase.py:7: [W1648(bad-python3-import), ] Module moved in Python 3
************* Module runtime.PLCObject
runtime/PLCObject.py:33: [W1648(bad-python3-import), ] Module moved in Python 3

Wed, 13 Mar 2019 11:51:40 +0300Remove execute attributes from runtime/PLCObject.py
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 13 Mar 2019 11:51:40 +0300] rev 2539
Remove execute attributes from runtime/PLCObject.py

Wed, 13 Mar 2019 11:49:46 +0300Fix typo
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 13 Mar 2019 11:49:46 +0300] rev 2538
Fix typo

Wed, 13 Mar 2019 11:47:03 +0300Fix various pylint and pep8 errors
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 13 Mar 2019 11:47:03 +0300] rev 2537
Fix various pylint and pep8 errors

Check basic code-style problems for PEP-8
pep8 version: 2.4.0
./connectors/PYRO/__init__.py:57:43: E261 at least two spaces before inline comment
./connectors/SchemeEditor.py:29:21: E128 continuation line under-indented for visual indent
./controls/IDBrowser.py:101:23: E127 continuation line over-indented for visual indent
./controls/IDBrowser.py:102:23: E127 continuation line over-indented for visual indent

Check for problems using pylint ...
No config file found, using default configuration
pylint 1.9.4,
astroid 1.6.5
Python 2.7.16rc1 (default, Feb 18 2019, 11:05:09)
[GCC 8.2.0]
Use multiple threads for pylint
Using config file /home/developer/WorkData/PLC/beremiz/beremiz/.pylint
************* Module connectors.PYRO_dialog
connectors/PYRO_dialog.py:9: [W0611(unused-import), ] Unused import wx
************* Module connectors
connectors/__init__.py:32: [W1652(deprecated-types-field), ] Accessing a deprecated fields on the types module
connectors/__init__.py:32: [C0411(wrong-import-order), ] standard import "from types import ClassType" should be placed before "from connectors.ConnectorBase import ConnectorBase"
************* Module connectors.PYRO.PSK_Adapter
connectors/PYRO/PSK_Adapter.py:7: [C0411(wrong-import-order), ] standard import "import ssl" should be placed before "import sslpsk"
************* Module connectors.SchemeEditor
connectors/SchemeEditor.py:29: [C0330(bad-continuation), ] Wrong continued indentation (add 1 space).
wx.ALIGN_CENTER_VERTICAL),
^|
connectors/SchemeEditor.py:42: [W0631(undefined-loop-variable), SchemeEditor.__init__] Using possibly undefined loop variable 'tag'
************* Module runtime.WampClient
runtime/WampClient.py:138: [W1612(unicode-builtin), WampSession.onJoin] unicode built-in referenced
runtime/WampClient.py:154: [W1612(unicode-builtin), WampSession.publishWithOwnID] unicode built-in referenced
runtime/WampClient.py:346: [W1612(unicode-builtin), PublishEvent] unicode built-in referenced
runtime/WampClient.py:351: [W1612(unicode-builtin), PublishEventWithOwnID] unicode built-in referenced
runtime/WampClient.py:31: [W0611(unused-import), ] Unused str imported from builtins as text
************* Module runtime.PLCObject
runtime/PLCObject.py:35: [W1648(bad-python3-import), ] Module moved in Python 3
runtime/PLCObject.py:35: [C0411(wrong-import-order), ] standard import "import md5" should be placed before "from six.moves import xrange"
runtime/PLCObject.py:36: [C0411(wrong-import-order), ] standard import "from tempfile import mkstemp" should be placed before "from six.moves import xrange"
runtime/PLCObject.py:37: [C0411(wrong-import-order), ] standard import "import shutil" should be placed before "from six.moves import xrange"
runtime/PLCObject.py:38: [C0411(wrong-import-order), ] standard import "from functools import wraps, partial" should be placed before "from six.moves import xrange"
************* Module runtime.Worker
runtime/Worker.py:12: [W1648(bad-python3-import), ] Module moved in Python 3
************* Module runtime.spawn_subprocess
runtime/spawn_subprocess.py:125: [C0325(superfluous-parens), ] Unnecessary parens after 'print' keyword
runtime/spawn_subprocess.py:130: [C0325(superfluous-parens), ] Unnecessary parens after 'print' keyword
runtime/spawn_subprocess.py:125: [E1601(print-statement), ] print statement used
runtime/spawn_subprocess.py:130: [E1601(print-statement), ] print statement used
************* Module controls.IDBrowser
controls/IDBrowser.py:101: [C0330(bad-continuation), ] Wrong continued indentation (remove 5 spaces).
if self.isManager
| ^
controls/IDBrowser.py:102: [C0330(bad-continuation), ] Wrong continued indentation (remove 5 spaces).
else dv.DATAVIEW_CELL_INERT),
| ^
************* Module Beremiz_service
Beremiz_service.py:34: [W0611(unused-import), ] Unused import __builtin__

Wed, 13 Mar 2019 10:19:30 +0300Fix invalid python3 syntax
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 13 Mar 2019 10:19:30 +0300] rev 2536
Fix invalid python3 syntax

Syntax checking using python3 ...
Python 3.7.2+
File "./connectors/PYRO/__init__.py", line 76
except Exception, e:
^
SyntaxError: invalid syntax

Syntax error in ./connectors/PYRO/__init__.py
File "./connectors/PYRO/PSK_Adapter.py", line 40
except ProtocolError, x:
^
SyntaxError: invalid syntax

Syntax error in ./s.py
File "./runtime/Worker.py", line 67
raise _job.exc_info[0], _job.exc_info[1], _job.exc_info[2]
^
SyntaxError: invalid syntax

Wed, 13 Mar 2019 10:02:11 +0300Exclude pyjslib.py from python3 syntax correction check
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 13 Mar 2019 10:02:11 +0300] rev 2535
Exclude pyjslib.py from python3 syntax correction check

pyjs doesn't support python3 and it's unmaintained.
async is a new keyword introduced in python 3.7.

./tests/tools/check_source.sh
Syntax checking using python3 ...
Python 3.7.2+

Syntax error in ./runtime/Worker.py
File "./svgui/pyjs/lib/pyjslib.py", line 24
def import_module(path, parent_module, module_name, dynamic=1, async=False):
^
SyntaxError: invalid syntax

Wed, 13 Mar 2019 09:56:37 +0300revert occasionally committed changed first_steps project.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 13 Mar 2019 09:56:37 +0300] rev 2534
revert occasionally committed changed first_steps project.

project was changed by commit:
update translations from https://www.transifex.com/beremiz/beremiz-ide (756d02cf78db)

Mon, 18 Mar 2019 07:13:04 +0000Merged in masterschlumpf/beremiz/generate-button (pull request #38)
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 18 Mar 2019 07:13:04 +0000] rev 2533
Merged in masterschlumpf/beremiz/generate-button (pull request #38)

"Generate Prgram" button

Approved-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>

Fri, 15 Mar 2019 18:27:43 +0100Create a "Generate Program As..." menu to make the "Generate Program" toolbutton even more useful. generate-button
Schlumpf <schlumpf@kr-ll.de> [Fri, 15 Mar 2019 18:27:43 +0100] rev 2532
Create a "Generate Program As..." menu to make the "Generate Program" toolbutton even more useful.

The behaviour is the same as "Save" and "Save As...". Now "Generate Program" uses the last filename
if known and "Generate Progam As..." asks every time.

Fri, 15 Mar 2019 17:34:24 +0100Add "Generate Program" to toolbar in PLCOpenEditor standalone mode. generate-button
Schlumpf <schlumpf@kr-ll.de> [Fri, 15 Mar 2019 17:34:24 +0100] rev 2531
Add "Generate Program" to toolbar in PLCOpenEditor standalone mode.

Currently you can find the "Generate Program" action only in the file menu,
but this action is very often used in standalone mode, so I added toolbuffon.

Fri, 22 Mar 2019 11:10:37 +0100Merged search in CTN branch
Edouard Tisserant [Fri, 22 Mar 2019 11:10:37 +0100] rev 2530
Merged search in CTN branch

Fri, 22 Mar 2019 11:09:41 +0100Finished adding search in python and C files. Stripped debug code and useless comments. Close branch search_in_CTN
Edouard Tisserant [Fri, 22 Mar 2019 11:09:41 +0100] rev 2529
Finished adding search in python and C files. Stripped debug code and useless comments. Close branch

Fri, 22 Mar 2019 10:57:04 +0100WIP adding searching capabilities in python files. was done : search_in_CTN
Edouard Tisserant [Fri, 22 Mar 2019 10:57:04 +0100] rev 2528
WIP adding searching capabilities in python files. was done :
- added search in body of Code File Tree Nodes (moved editor code so that we CTN search can have the same sections text layout as editor to search in)

Thu, 21 Mar 2019 14:00:26 +0100WIP adding searching capabilities in python files. was done : search_in_CTN
Edouard Tisserant [Thu, 21 Mar 2019 14:00:26 +0100] rev 2527
WIP adding searching capabilities in python files. was done :
- added search in global variables used by Code File Tree Nodes

Thu, 21 Mar 2019 13:10:49 +0100WIP adding searching capabilities in python files. was done : search_in_CTN
Edouard Tisserant [Thu, 21 Mar 2019 13:10:49 +0100] rev 2526
WIP adding searching capabilities in python files. was done :
- fixed highlighting search result in text body of CTN code editor.

Thu, 21 Mar 2019 13:04:26 +0100WIP adding searching capabilities in python files. was done : search_in_CTN
Edouard Tisserant [Thu, 21 Mar 2019 13:04:26 +0100] rev 2525
WIP adding searching capabilities in python files. was done :
- change stub search results to trigger highlighting un variable panel
- trying to highlight in CTN code file editors -> problem with EditorPanel not having self.VariableEditor set...
- added highlight capability to CTN's CodeFileEditor's VariablePanel

Wed, 20 Mar 2019 11:34:41 +0100WIP adding searching capabilities in python files. was done : search_in_CTN
Edouard Tisserant [Wed, 20 Mar 2019 11:34:41 +0100] rev 2524
WIP adding searching capabilities in python files. was done :
- fixed stub CTN search results so that they can be accepted by search result panel
- worked on search result panel so that it can display those CTN results
- made search result panel display correctly stub search result, for variables and body matches
- EditProjectElement now opens CTN node as well as PlcOpen project nodes

Fri, 15 Mar 2019 14:11:49 +0100WIP adding searching capabilities in python files: search_in_CTN
Edouard Tisserant [Fri, 15 Mar 2019 14:11:49 +0100] rev 2523
WIP adding searching capabilities in python files:
- Added recursive Search capability to config tree nodes
- Added stub search to code editors, for test

Mon, 11 Mar 2019 17:20:15 +0100Fixed more pylint reports :
Edouard Tisserant <edouard.tisserant@gmail.com> [Mon, 11 Mar 2019 17:20:15 +0100] rev 2522
Fixed more pylint reports :
connectors/__init__.py:31: [W1652(deprecated-types-field), ] Accessing a deprecated fields on the types module
in fact, it should have been unused import.

Mon, 11 Mar 2019 13:51:07 +0100Long due merge
Edouard Tisserant [Mon, 11 Mar 2019 13:51:07 +0100] rev 2521
Long due merge

Tue, 05 Mar 2019 11:43:20 +0300Fix backtrace on printing localized (non-ascii) error message in PLCGenerator.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 05 Mar 2019 11:43:20 +0300] rev 2520
Fix backtrace on printing localized (non-ascii) error message in PLCGenerator.

traceback:
File "C:\Beremiz\targets\st\beremiz\..\..\..\beremiz\beremiz\BeremizIDE.py", line 811, in OnMenu
getattr(self.CTR, method)()
File "C:\Beremiz\targets\st\beremiz\..\..\..\beremiz\beremiz\ProjectController.py", line 1134, in _Build
IECGenRes = self._Generate_SoftPLC()
File "C:\Beremiz\targets\st\beremiz\..\..\..\beremiz\beremiz\ProjectController.py", line 746, in _Generate_SoftPLC
if self._Generate_PLC_ST():
File "C:\Beremiz\targets\st\beremiz\..\..\..\beremiz\beremiz\ProjectController.py", line 763, in _Generate_PLC_ST
self._getIECgeneratedcodepath())
File "C:\Beremiz\targets\st\beremiz\..\..\..\beremiz\beremiz\PLCControler.py", line 466, in GenerateProgram
errors.append(str(ex))
<type 'exceptions.UnicodeEncodeError'>: 'ascii' codec can't encode characters in position 0-9: ordinal not in range(128)
Fix backtrace on printing localized (non-ascii) error message in PLCGenerator.

traceback:
File "C:\Beremiz\targets\st\beremiz\..\..\..\beremiz\beremiz\BeremizIDE.py", line 811, in OnMenu
getattr(self.CTR, method)()
File "C:\Beremiz\targets\st\beremiz\..\..\..\beremiz\beremiz\ProjectController.py", line 1134, in _Build
IECGenRes = self._Generate_SoftPLC()
File "C:\Beremiz\targets\st\beremiz\..\..\..\beremiz\beremiz\ProjectController.py", line 746, in _Generate_SoftPLC
if self._Generate_PLC_ST():
File "C:\Beremiz\targets\st\beremiz\..\..\..\beremiz\beremiz\ProjectController.py", line 763, in _Generate_PLC_ST
self._getIECgeneratedcodepath())
File "C:\Beremiz\targets\st\beremiz\..\..\..\beremiz\beremiz\PLCControler.py", line 466, in GenerateProgram
errors.append(str(ex))
<type 'exceptions.UnicodeEncodeError'>: 'ascii' codec can't encode characters in position 0-9: ordinal not in range(128)


Close #67

Tue, 05 Mar 2019 11:19:36 +0300Fix crash if LD input contact isn't connected
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 05 Mar 2019 11:19:36 +0300] rev 2519
Fix crash if LD input contact isn't connected

Traceback (most recent call last):
File "/home/developer/WorkData/PLC/beremiz/beremiz/BeremizIDE.py", line 339, in OnMethod
obj.CTR.CallMethod('_'+meth)
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 1996, in CallMethod
getattr(self, method)()
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 1134, in _Build
IECGenRes = self._Generate_SoftPLC()
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 746, in _Generate_SoftPLC
if self._Generate_PLC_ST():
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 763, in _Generate_PLC_ST
self._getIECgeneratedcodepath())
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCControler.py", line 456, in GenerateProgram
self.ProgramChunks = GenerateCurrentProgram(self, self.Project, errors, warnings)
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 1762, in GenerateCurrentProgram
generator.GenerateProgram()
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 478, in GenerateProgram
self.GeneratePouProgram(pou_name)
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 260, in GeneratePouProgram
program = pou_program.GenerateProgram(pou)
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 1718, in GenerateProgram
self.ComputeProgram(pou)
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 1028, in ComputeProgram
self.GenerateBlock(instance, block_infos, body, None)
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 1144, in GenerateBlock
expression = self.ComputeExpression(body, connections, executionOrderId > 0)
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 1373, in ComputeExpression
paths = self.GeneratePaths(connections, body, order, to_inout)
File "/home/developer/WorkData/PLC/beremiz/beremiz/PLCGenerator.py", line 1344, in GeneratePaths
elif isinstance(result[0], list):
IndexError: list index out of range


Close #70

Fri, 01 Mar 2019 16:55:16 +0300Fix section styling in code editor (python and c extensions) if non-latin symbols are used in the code
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 01 Mar 2019 16:55:16 +0300] rev 2518
Fix section styling in code editor (python and c extensions) if non-latin symbols are used in the code

Problem exists even if non-latin characters are placed in comments.
Close #76

Thu, 21 Feb 2019 11:39:50 +0300update localization template
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 21 Feb 2019 11:39:50 +0300] rev 2517
update localization template

Thu, 21 Feb 2019 11:27:16 +0300merge
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 21 Feb 2019 11:27:16 +0300] rev 2516
merge

Thu, 21 Feb 2019 11:25:58 +0300updated list of translators
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 21 Feb 2019 11:25:58 +0300] rev 2515
updated list of translators

Thu, 21 Feb 2019 11:25:03 +0300update translations from https://www.transifex.com/beremiz/beremiz-ide
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 21 Feb 2019 11:25:03 +0300] rev 2514
update translations from https://www.transifex.com/beremiz/beremiz-ide

added Basque (eu) and Vietnamese (Viet Nam) (vi_VN) translations

Thu, 21 Feb 2019 10:58:37 +0300Add SpinButtons for integer and floating point variables in ForceVariableDialog
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 21 Feb 2019 10:58:37 +0300] rev 2513
Add SpinButtons for integer and floating point variables in ForceVariableDialog

it allows to change variable value using only mouse.

Thu, 21 Feb 2019 10:17:38 +0300Fix non-marking as manually forced floating point variable if the value isn't integer
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 21 Feb 2019 10:17:38 +0300] rev 2512
Fix non-marking as manually forced floating point variable if the value isn't integer

For example, if user in debug variable panel set any floating point
variable to 34.3, then it's not shown as forced (blue color) and user
can't release this enforcement.

If user changes the value to 34.0, then enforcement shows
correctly. This is done because binary representation of floating point
numbers in IDE and runtime can be slightly different (double vs float)
and as a result values aren't equal.

Thu, 14 Feb 2019 10:27:24 +0300Don't close ForceVariableDialog if user entered wrong new value
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 14 Feb 2019 10:27:24 +0300] rev 2511
Don't close ForceVariableDialog if user entered wrong new value

return back to edit field in this case

Thu, 14 Feb 2019 10:19:30 +0300Additional fix for rewrite ForceVariableDialog commit (9076249f)
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 14 Feb 2019 10:19:30 +0300] rev 2510
Additional fix for rewrite ForceVariableDialog commit (9076249f)

fix following backtrace:

Traceback (most recent call last):
File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk3/wx/_core.py", line 16765, in <lambda>
lambda event: event.callable(*event.args, **event.kw) )
File "/home/developer/WorkData/PLC/beremiz/beremiz/controls/DebugVariablePanel/DebugVariableViewer.py", line 232, in HandleButton
button.ProcessCallback()
File "/home/developer/WorkData/PLC/beremiz/beremiz/controls/DebugVariablePanel/GraphButton.py", line 156, in ProcessCallback
self.Callback()
File "/home/developer/WorkData/PLC/beremiz/beremiz/controls/DebugVariablePanel/DebugVariableViewer.py", line 350, in OnForceButton
self.ForceValue(self.ItemsDict.values()[0])
File "/home/developer/WorkData/PLC/beremiz/beremiz/controls/DebugVariablePanel/DebugVariableViewer.py", line 428, in ForceValue
dialog.GetValue())
File "/home/developer/WorkData/PLC/beremiz/beremiz/dialogs/ForceVariableDialog.py", line 232, in GetValue
return GetTypeValue[self.IEC_Type](wx.TextEntryDialog.GetValue(self))
TypeError: unbound method GetValue() must be called with TextEntryDialog instance as first argument (got ForceVariableDialog instance instead)

Thu, 14 Feb 2019 10:02:58 +0300Fix redraw problems in preview frames and debug panel
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 14 Feb 2019 10:02:58 +0300] rev 2509
Fix redraw problems in preview frames and debug panel

The problem was that direct call of RefreshView (now DrawView) doesn't
generate EVT_PAINT (at least on GNU/Linux with Wayland and wxgtk build
with gtk3+ support).
Now RefreshView simply triggers EVT_PAINT and EVT_PAINT handler does actual work.

Thu, 14 Feb 2019 09:44:19 +0300Rewrite ForceVariableDialog. It's not based on wx.TextEntryDialog
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 14 Feb 2019 09:44:19 +0300] rev 2508
Rewrite ForceVariableDialog. It's not based on wx.TextEntryDialog

Don't customize standard wx.TextEntryDialog on the fly, implement your
own dialog for that with expected behavior and without any hacks.

Wed, 13 Feb 2019 13:35:48 +0000merge updates to modbus/mb_runtime.c
Mario de Sousa <msousa@fe.up.pt> [Wed, 13 Feb 2019 13:35:48 +0000] rev 2507
merge updates to modbus/mb_runtime.c