fix issue with compiling SFC POU with non-connected transition (type "connection")

fix bug with recent projects menu, remove path to the project from menu, if project directory doesn't exist

fix bug with empty directories in recent projects menu
remove path to a project from recent projects menu, if project directory is empty

fix list of recent projects in File menu, add path to current project after Save As

by default init input and output in step sfc block, and output for initial step sfc block

update PLC status after initialization

This is necessary especially if existed PLC program is loaded, but PLC
is not started automatically. In this case taskbar icon shows that PLC
isn't empty.

always load existing PLC program from the working directory

stop PLC before unloading


This fixes segmentation fault if service was quit without stopping it.
It has happened if Beremiz service was quit using taskbar icon or by
closing Beremiz IDE (in case of autostarted local service).

In second case to trigger the bug following step has to be done:
1. Open Beremiz IDE
2. Open project, compile and connect to LOCAL:// runtime
3. Transfer and start the PLC program
4. Open other project without disconneting the PLC runtime
5. Close Beremiz IDE

add internatialization support for Beremiz_service.py

fix issue with changing annonced Pyro service name via taskbar icon

don't crash on trying to change IP interface for Beremiz_service using taskbar icon if IP wasn't previously


By default IP is not set (None) and service listen only on localhost interface.

start/stop from taskbar icon only if PLC is stopped/started

close Pyro socket after daemon stop


without that socket port is open after daemon shutdown.
As a result if you restart daemon with new settings (service name, for example),
it can't listen on already used port and opens the next free TCP port
regardless of requested settings.

add python-wxgtk3.0 support to Beremiz_service.py

make about dialog on Windows not so big


It was automatically expanded to place description in one line.

update Russian translation

add i18n to PLC status

Extra strings are added to the code to make mki18n.py to find these
strings in source files and put them into i18n/messages.pot.

remove clear and reset execution order buttons in popup menu in SFC and LD viewers.

fix initial(equal to the min) number of sequences in SFC Divergence dialog.

make only correct blocks(by IEC 61131-3 standard) available in wire popup menu in SFC Viewer

move EnhancedStatusBar.py to the right location

add internatialization support to startup messages during checking software updates

fix translation strings with multiple parameters


this fixes a lot of warnings given by msgmerge:

../PLCOpenEditor.py:196: warning: 'msgid' format string with unnamed arguments cannot be properly localized:
The translator cannot reorder the arguments.
Please consider using a format string with named arguments,

change bug report address for PLCOpenEditor to beremiz-devel@lists.sourceforge.net

make error message to be the same as in Beremiz IDE

fix segmentation fault on clicking red point in compilation console if that compilation error coverts several units in plcopen file

closes #11

add localization to time strings in DebugVariablePanel and to dialog shown after variable drag'n'drop

fix issue that if located variable was dropped in location column, then address was changed in wrong row (row - 1).

It's not neccessary to carry about label size. YToRow() does the work.

increase size for time buttons in LogViewer

The buttons are slightly bigger now. This gives more space for label
translations in other languages.
closes #12

don't rebuild the makefile based project if only companyName, projectName or productName are changed

And this fix current encoding issues, because all these information fields can
contain non-latin characters.

add progress bar to status bar

It can be used to display progress during program upload.
To use it call ShowPLCProgress (like ShowPLCProgress("transfered",
10)) in your PLCObject implementation.

fix warning: 'return' with no value in function startPLC

fix inconsistent whitespace

fix license notices in source files and license files under GPLv2+

Previously a lot of files were referenced to GNU Public License 2.1,
which never existed.
All copyright attributions are kept the same.

fix PLC autostart option for Beremiz_service.py

remove old debug code

fix wrong font family in CustromGrid control

closes #10

now only correct chart can be created in SFC Viewer

if user trying to connect incompatible blocks (by IEC 61131-3 standard), wire highlight will become red

add Russian translations for About dialogs

make about dialog boxes use standard wx about dialogs

Any information in dialog can be easily changed without much effort
and the dialog can be easy translated.

Unfortunately on Windows there is no good standard about dialog,
therefore own implementation is used there.

fix highlighting error and warning messages with non-lating characters

fix breaking non-latin description and comments in FBD, LD, SFC and
project settings after Undo operation

fix borders of pull-down choice list box in Config tab, in Project Properties

add version.py needed for previous commit '4ce8492'

add version with commit hash to 'About' dialogs for Beremiz IDE and PLCOpenEditor

ignore generated bugreports and output of i18n script

now dialogs Find and Search in Project can be closed with ESC button

fix russian translation of "direction" in Find dialog

fix major bugs in Find and Search in Project functionality.

fix case sensitive and regexp search, remove duplicating code

Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>

fix issue with non-updated button 'generated IECCode' after Build and Clean

increase dialog size for edit SFC transition, so buttons are visible

fix issue that sometimes period for cyclic task wasn't saved.

This is complete fix for the problem described in 8626bba.

add first steps example, that shows how use all IEC 61131 languages

fix issue with empty frame with generated ST code

fix not saving location address from variable panel

this regression was introduced by commit 3518d10

add $(Beremiz installation)/mingw/bin in PATH on Windows platform

This fixes issue if multiple gcc installation are found in user's
PATH. Now gcc from Beremiz is used by default.

fix issue with non-working global hotkeys in IEC code panel

add more comments to svgui example

cleanup traffic lights example

cleanup svgui example

Fix bug with two or more wires connected to one input. Now only one wire can be connected to one input, except BOOLean signals in LD and SFC. If user trying to connect wire with already connected input, wire highlight will become red.
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>

fix issue with sequence of multiple whitespaces in makefile command
line from project configuration

for every additional whitespace '""' was inserted in result command line.

fix minor issue and do some cleanup work in genericmake example

cleanup python example

complete fix in commit 3518d10 for wxgtk2.8

fix syncronization issue during killing ProcessLoggers on IDE close

Add russian translation on label "Tick" in debug variable panel.

Add russian language in Project properties -> Other menu.

fix issue, that was impossible to change variable location IEC-address, when wx 3.0 is used

Merge

fix infinite recursion in 'Reset Execution Order' functionality if FBD body contains feedback connections

fix issues in PLCOpenEditor with moving from wxWidgets 2.8 to 3.0

1)
./PLCOpenEditor.py:63: wxPyDeprecationWarning: Using deprecated class PySimpleApp.
app = wx.PySimpleApp()

2)
./PLCOpenEditor.py:475: wxPyDeprecationWarning: Call to deprecated item.
wx.InitAllImageHandlers()

3)
Traceback (most recent call last):
File "./PLCOpenEditor.py", line 480, in <module>
frame = PLCOpenEditor(None, fileOpen=fileOpen)
File "./PLCOpenEditor.py", line 163, in __init__
IDEFrame.__init__(self, parent)
File "/tmp/f/beremiz/IDEFrame.py", line 657, in __init__
self._init_ctrls(parent)
File "/tmp/f/beremiz/IDEFrame.py", line 485, in _init_ctrls
self._init_icon(prnt)
File "/tmp/f/beremiz/IDEFrame.py", line 476, in _init_icon
if self.icon:
AttributeError: 'PLCOpenEditor' object has no attribute 'icon'

update messages and add Russian translation for new menu entry 'switch perspective'

Merged in Surkovsv/beremiz (pull request #4)

Add hotkey (F12) for switching perspective.

Add hotkey (F12) for switching perspective.

Switching perspective feature hides/restores all panels except of the main editor window for current FB.
So all available screen space is used for editor.

Merged skvorl/beremiz into default

Fixed crash when starts on OS X with wxPython 3.0.x

Merged skvorl/beremiz into default

Added .idea dir to ignore.

cleanup logging example

add comments, rename variables, some rework for algorithm

fix non-working logging at first connection to PLC after Beremiz launch

At the same time this helps to avoid exception described in 1484:d5efbb20927e.

Merged in Surkovsv/beremiz (pull request #2)

fix bug with non-editable names and types of FB local variables in POU's written in ST or IL

fix bug with non-editable names and types of FB local variables in POU's written in ST or IL

fix highlighting input/outputs in function call in ST, if comment section is placed
inside call.

For example:

PackOutputs(
W4 := OUT1,
W5 := OUT2,
W6 := OUT3,
W7 := OUT4,
W8 := OUT5 (* comment inside call *),
W9 := OUT6,
W10 := OUT7,
W11 := OUT8);

add initialization tick time on Beremiz start

This fixes issue #6

fix race condition in ProcessLogger

- Fixed startup from ancestor code.

This fixes issue #5

fix bug: Beremiz IDE hangs during launching Beremiz_service

this is regression introduced as side effect by d7f474d [fix issue
with sometimes wrong return code of ProcessLogger]

automatically detect flags supported by matiec and find correct path
for matiec C library files

This makes possible to use an old matiec and the new one.

fix bug that appears if datatype in the project tree is renamed to wrong name (keyword, existend type,...)

Traceback (most recent call last):
File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk2/wx/_core.py", line 16765, in <lambda>
lambda event: event.callable(*event.args, **event.kw) )
File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk2/wx/lib/expando.py", line 126, in _adjustCtrl
numLines = self.GetNumberOfLines()
File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk2/wx/_core.py", line 16710, in __getattr__
raise PyDeadObjectError(self.attrStr % self._name)
PyDeadObjectError: The C++ part of the TreeTextCtrl object has been deleted, attribute access no longer allowed.

add distribution license notice to about dialog as GPL requires

add GPLv2 license

add copyright notices to python files where there were missing, that
is required by GPLv2

fix issue that was impossible to remove local instance of functional
block if pou is written in ST or IL

fix highlighting of multiline comments in ST and IL

close #2

fix error if non-latin character was entered in initial value in
data type element

Traceback (most recent call last):
File "/home/beremiz/editors/DataTypeEditor.py", line 575, in OnStructureElementsGridCellChange
value = self.StructureElementsTable.GetValue(row, col)
File "/home/beremiz/editors/DataTypeEditor.py", line 80, in GetValue
return str(value)
UnicodeEncodeError: 'ascii' codec can't encode characters in position 0-2: ordinal not in range(128)
Traceback (most recent call last):
File "/home/beremiz/editors/DataTypeEditor.py", line 80, in GetValue
return str(value)
UnicodeEncodeError: 'ascii' codec can't encode characters in position 0-2: ordinal not in range(128)
Traceback (most recent call last):
File "/home/beremiz/editors/DataTypeEditor.py", line 80, in GetValue
return str(value)
UnicodeEncodeError: 'ascii' codec can't encode characters in position 0-2: ordinal not in range(128)

fix issue with sometimes wrong return code of ProcessLogger


As a result of wrong return code Beremiz gives folowing traceback:
Traceback (most recent call last):
File "./Beremiz.py", line 850, in OnMenu
getattr(self.CTR, method)()
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 925, in _Build
IECGenRes = self._Generate_SoftPLC()
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 568, in _Generate_SoftPLC
return self._Compile_ST_to_SoftPLC()
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 661, in _Compile_ST_to_SoftPLC
C_files.remove("POUS.c")
ValueError: list.remove(x): x not in list

The problem is that both threads (for reading stdout and stderr) call self.Proc.poll(),
that updates internal returncode field. This call is done without any locking and the first thread gets correct result,
but other gets 0 as retval. If 0 gets thread, that afterwards calls callback finish, then wrong return code is returned
to the parent. Now only the thread with a callback polls for the return code, other thread just checked local value.

Additionally function spin() waits now until all threads finish reading their pipes, so the results are always correct.

Fix error about missing attribute 'timeout' that happens sometimes during compilation

The fix [1476:49f1763a5613] of the problem with following trace was wrong.
Traceback (most recent call last):
File "./Beremiz.py", line 1229, in run_with_except_hook
run_old(*args, **kw)
File
"/home/developer/WorkData/PLC/beremiz/beremiz/util/ProcessLogger.py",
line 68, in run
self.endcallback(self.Proc.pid, err)
File
"/home/developer/WorkData/PLC/beremiz/beremiz/util/ProcessLogger.py",
line 169, in finish
if self.timeout: self.timeout.cancel()
AttributeError: ProcessLogger instance has no attribute 'timeout'
The problem was that compilation process was finished before the timeout attribute is set.
Now timeout is set before launcing of compilation process.

fix copying elements with non-latin content like comment element, or
variables with description in non-latin character set

before any non-latin text was converted after copying to strings like '&#1069;&#1090;&#1086;...'

fix issue that if functional block is dragged from project panel into
ST text editor and in dialog 'Please enter a block name' button
'cancel' is pressed, despite of cancel text about drag'n'dropped type
is pasted in ST program.

fix regression introduced by changeset: 1431:28e9d479aa65 [Use '-p' command line option when running matiec (iec2c)]

Variable matiec_flags in c_ext.py and PythonFileCTNMixin.py is not
used for flags for matiec (IEC to C compiler) actually, but it's used
to compile C-code generated for extensions using normal C-compiler,
like gcc.

fix display of ARRAY fields inside of structure data types.

Previously ARRAY fields in structures were displayed, for example,
like 'ARRAY [1..2] OF ARRAY' instead of 'ARRAY [1..2] OF INT'. Because
of this error the array type can be really edited.

fix Traceback if search icon on library panel is clicked, when no
category/item is selected in the library.

The problem is here, that if nothing is selected method GetSelection()
returns root item, that doesn't have any python data associated with it.
This issue seems to be wx3.0 specified, because it doesn't exist
with wx2.8 on Windows.

update Russian about Beremiz dialog window

fix issue, that was impossible to change time interval for cyclic
tasks, when wx 3.0 is used

fix deprecation warnings about accessing properties m_x, m_y of wxKeyEvent

/home/beremiz/beremiz/controls/PouInstanceVariablesPanel.py:354: wxPyDeprecationWarning: Accessing deprecated property.
event.m_x = size.width / 2

fix set_color_cycle from matplotlib deprecation warning

/usr/lib/python2.7/dist-packages/matplotlib/cbook.py:137: MatplotlibDeprecationWarning: The set_color_cycle attribute was deprecated in version 1.5. Use set_prop_cycle instead.
warnings.warn(message, mplDeprecation, stacklevel=1)

update Russian translation

add i18n for some strings in DiscoveryDialog, DurationEditDialog, ProjectDialog and CodeFileEditor

fix wrong Row number in DiscoveryDialog.py that caused following traceback:

Traceback (most recent call last):
File "/home/beremiz/beremiz/ProjectController.py", line 1536, in _Connect
dialog = DiscoveryDialog(self.AppFrame)
File "/home/beremiz/beremiz/dialogs/DiscoveryDialog.py", line 124, in __init__
self._init_ctrls(parent)
File "/home/beremiz/beremiz/dialogs/DiscoveryDialog.py", line 121, in _init_ctrls
self._init_sizers()
File "/home/beremiz/beremiz/dialogs/DiscoveryDialog.py", line 73, in _init_sizers
self._init_coll_ButtonGridSizer_Growables(self.ButtonGridSizer)
File "/home/beremiz/beremiz/dialogs/DiscoveryDialog.py", line 64, in _init_coll_ButtonGridSizer_Growables
parent.AddGrowableRow(1)
File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk2/wx/_core.py", line 15343, in AddGrowableRow
return _core_.FlexGridSizer_AddGrowableRow(*args, **kwargs)
PyAssertionError: C++ assertion "!m_rows || idx < (size_t)m_rows" failed at ../src/common/sizer.cpp(1967) in AddGrowableRow(): invalid row index

increase height of some dialog windows so they have enough space for buttons

add translation into Russian for dialog window "About PLCOpen Editor"

add translation of "about" window into Russian

make About and Find dialogs have the same icon as main Beremiz window

all child windows will take the parent's icon, if no other is specified.

fix splash loading with wx3.0

Previously only gray square was shown. Apparently to show splash screen several calls of wx.Yield() are necessary.
Unfortunately splash.IsShowOnScreen() returns always 1 regardless of whether splash is on the screen or not.
this fix is a dirty hack. It just process all events after splash is created during 0.3 seconds.

add i18n for couple of strings in TextViewer.py
add source file for Russian translation
update messages.pot and app.fil
update Russian translation

increase height for ConnectionDialog and ArrayTypeDialog to have
enough place for buttons

add Russian translation

bitmap in wx3.0 doesn't have useAlpha() method

Suppress WXDEBUG assertions, as happens by default with wx2.8. This is
necessary for wx3.0

Exception while connecting LOCAL://!
Traceback (most recent call last):
File "/home/beremiz/beremiz/ProjectController.py", line 1560, in _Connect
self._SetConnector(connectors.ConnectorFactory(uri, self))
File "/home/beremiz/beremiz/ProjectController.py", line 1508, in _SetConnector
self.StatusTimer.Start(milliseconds=500, oneShot=False)
File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk2/wx/_misc.py", line 1324, in Start
return _misc_.Timer_Start(*args, **kwargs)
PyAssertionError: C++ assertion "m_window" failed at ../src/gtk/dcclient.cpp(2043) in DoGetSize(): GetSize() doesn't work without window

enable use of wxWidgets-3.0

make mki18n.py wx-3.0 compatible and fix segmentation fault

$ python mki18n.py -m -v --moTarget=../locale --domain=Beremiz
No project directory given. Using current one: /home/beremiz/beremiz/i18n
Application domain used is: 'Beremiz'
Target directory for .mo files is: ../locale
../src/common/stdpbase.cpp(62): assert "traits" failed in Get(): create wxApp before calling this
Segmentation fault

fix issue, then it wasn't possible to view FBD programs

the reason for that is possible wx-3.0-gtk2 bug that happens if
ALWAYS_SHOW_SB is set.

Traceback (most recent call last):
File "Beremiz.py", line 1045, in OnProjectTreeItemActivated
IDEFrame.OnProjectTreeItemActivated(self, event)
File "IDEFrame.py", line 1667, in OnProjectTreeItemActivated
self.EditProjectElement(item_infos["type"], item_infos["tagname"])
File "IDEFrame.py", line 1752, in EditProjectElement
new_window = Viewer(self.TabsOpened, tagname, self, self.Controler)
File "editors/Viewer.py", line 611, in __init__
EditorPanel.__init__(self, parent, tagname, window, controler, debug)
File "editors/EditorPanel.py", line 68, in __init__
self._init_ctrls(parent)
File "editors/EditorPanel.py", line 52, in _init_ctrls
self._init_Editor(self)
File "editors/Viewer.py", line 603, in _init_Editor
style=wx.HSCROLL | wx.VSCROLL | wx.ALWAYS_SHOW_SB)
File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk2/wx/_windows.py", line 296, in __init__
_windows_.ScrolledWindow_swiginit(self,_windows_.new_ScrolledWindow(*args, **kwargs))
PyAssertionError: C++ assertion "scrolled" failed at ../src/gtk/scrolwin.cpp(205) in DoShowScrollbars(): window must be created

fix issue, then it wasn't possible to remove functional blocks from
project using right click and popup menu.

The problem is that, PopupMenu was called using IDEFrame object and as
a result item in ProjectTree loosed focus and focus went to IDEFrame.
Therefore later functions couldn't detect which item in ProjectTree
was selected.

fix many compilation warnings about static variables used by non-static functions

[CC] plc_main.c -> plc_main.o
/tmp/be/build/plc_main.c:396:40: warning: ?LogBuff? is static but used in inline function ?copy_from_log? which is not static
memcpy((char*)buf + remaining, LogBuff[level], size - remaining);
^
/tmp/be/build/plc_main.c:395:22: warning: ?LogBuff? is static but used in inline function ?copy_from_log? which is not static
memcpy(buf, &LogBuff[level][buffpos], remaining);
^
...

^
/tmp/be/build/plc_debugger.c:825:20: warning: ?retain_offset? is static but used in inline function ?BufferIterator? which is not static
Retain(retain_offset, size, real_value_p);
^
/tmp/be/build/plc_debugger.c:823:47: warning: ?retain_offset? is static but used in inline function ?BufferIterator? which is not static
unsigned int next_retain_offset = retain_offset + size;
^
^

make attribute CFLAGS and LDFLAGS optional and add default empty value

Actually CFLAGS and LDFLAGS are not required and can be empty.
Without default empty value if target platform in project settings was
set to "Linux" CFLAGS and LDFLAGS was initialized with NoneType.
The result was broken build and it wasn't to save/load project with
such settings.

Traceback (most recent call last):
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 956, in _Build
if not builder.build() :
File "/home/developer/WorkData/PLC/beremiz/beremiz/targets/toolchain_gcc.py", line 96, in build
Builder_CFLAGS = ' '.join(self.getBuilderCFLAGS())
TypeError: sequence item 0: expected string, NoneType found

fix issue, when structure data type with array field is created

Traceback (most recent call last):
File "editors/DataTypeEditor.py", line 669, in ElementArrayTypeFunction
self.RefreshTypeInfos()
File "editors/DataTypeEditor.py", line 761, in RefreshTypeInfos
self.Controler.SetDataTypeInfos(self.TagName, infos)
File "PLCControler.py", line 2075, in SetDataTypeInfos
array.baseType.setcontent(PLCOpenParser.CreateElement(
AttributeError: 'lxml.etree._Element' object has no attribute 'setcontent'

fixes sometimes happened error during project compilation

Traceback (most recent call last):
File "./Beremiz.py", line 1229, in run_with_except_hook
run_old(*args, **kw)
File
"/home/developer/WorkData/PLC/beremiz/beremiz/util/ProcessLogger.py",
line 68, in run
self.endcallback(self.Proc.pid, err)
File
"/home/developer/WorkData/PLC/beremiz/beremiz/util/ProcessLogger.py",
line 169, in finish
if self.timeout: self.timeout.cancel()
AttributeError: ProcessLogger instance has no attribute 'timeout'