merge updates to modbus/mb_runtime.c

fix 'SaveAs' in case of overwriting existing project

Traceback (most recent call last):
File "/home/developer/WorkData/PLC/beremiz/beremiz/BeremizIDE.py", line 959, in OnSaveProjectAsMenu
self.CTR.SaveProjectAs()
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 600, in SaveProjectAs
self.SaveProject(old_project_path)
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 579, in SaveProject
self._getProjectFilesPath(self.ProjectPath))
File "/usr/lib/python2.7/shutil.py", line 200, in copytree
os.makedirs(dst)
File "/usr/lib/python2.7/os.py", line 157, in makedirs
mkdir(name, mode)
OSError: [Errno 17] File exists: '/tmp/tests/project_files'

fix 'SaveAs' to non-empty directory and directory without write permissions

fix problems with recursive beremiz.h inclusion

remove LogMessage prototype from plc_main_head.c

it's not needed, because prototype is included in beremiz.h
But it caused problems with TARGET_LOGGING_DISABLE.

merge

Make online debug optional

It could be useful for very small targets like Atmega (Arduino) and
for target bring-up there developer want to have running PLC program,
but has not implemented runtime communication yet.


TARGET_DEBUG_AND_RETAIN_DISABLE - completely disable debug and retain
functionality. Previously named TARGET_DEBUG_DISABLE.

TARGET_ONLINE_DEBUG_DISABLE - can be used to enable retain
functionality (no define TARGET_DEBUG_AND_RETAIN_DISABLE is used), but disable
online debug with corresponding RAM/FLASH overhead.

TARGET_LOGGING_DISABLE - disables logging functionality from runtime and PLC program

TARGET_EXT_SYNC_DISABLE - disables PLC program synchronization with
external events. For example, it could be used to synchronize several
PLCs that control motors for different axes.

By default all these options are off.

To test generate program for Generic target, put following files in
project files directory and run build.sh after generating PLC program.
This is very easy to integrate into makefile (Generic target).

[------------- build.sh --------------------------]
files=$(find $PWD/../build -iname '*.c' | grep -v POUS.c)
arm-none-eabi-gcc \
-DTARGET_DEBUG_AND_RETAIN_DISABLE \
-DTARGET_ONLINE_DEBUG_DISABLE \
-DTARGET_LOGGING_DISABLE \
-DTARGET_EXT_SYNC_DISABLE \
-flto -ffunction-sections -fdata-sections -I../../../../matiec/lib/C \
$files \
main.c \
-Wl,--Map=./program.map,--cref \
-nodefaultlibs --specs=nano.specs -Wl,--static -Wl,--gc-section -Wl,--start-group -lc -lm -lnosys -lgcc -Wl,--end-group
[------------------------------------------------]

[------------- main.c --------------------------]
#ifndef TARGET_DEBUG_AND_RETAIN_DISABLE
void Retain(void){}
void InValidateRetainBuffer(void){}
void ValidateRetainBuffer(void){}
#endif

extern void __run(void);
int main(void)
{
for(;;) {
__run();
// sleep common_ticktime__ ns
// add common_ticktime__ ns to __CURRENT_TIME
}
return 0;
}
[------------------------------------------------]

Disable Python extension in First steps example

use pregenerated CRC32 lookup tables for retain on Win32 and GNU/Linux

This code could be possible reused on low-end targets with limited RAM.

code to generate lookup table:
[---------------------------------------------------------------------]

/* CRC lookup table and initial state. */
uint32_t crc32_table[256];

/* Generate CRC32 lookup table. */
void GenerateCRC32Table(void)
{
unsigned int i, j;
/* Use CRC-32-IEEE 802.3 polynomial 0x04C11DB7 (bit reflected). */
uint32_t poly = 0xEDB88320;

for (i = 0; i <= 0xFF; i++)
{
uint32_t c = i;
for (j = 0 ; j < 8 ; j++)
c = (c & 1) ? (c >> 1 ) ^ poly : (c >> 1);
crc32_table[i] = c;
}
}

void main(void)
{
GenerateCRC32Table();
int j=0;
for(int i=0; i<256; i++) {
printf("0x%08X, ", crc32_table[i]);
if (++j >= 8) {
j = 0;
printf("\n");
}
}
}
[---------------------------------------------------------------------]

Merged in masterschlumpf/beremiz/wx3-fix (pull request #37)

Fix an exception with wx-3.0-gtk3 in PLCOpenEditor when generating ST files

Approved-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>

Fix an exception on wx-3.0-gtk3 in PLCOpenEditor when generating ST files.

On Python2.7 with WX3.0 and GTK3, an assertionError rises on generating a ST file if the name is already set. The first generation works without problems, if you generate the file a second one, PLCOpenEditor tries to open the file
save dialog with the pre entered name from last run. Then the following assertion pops up:

PyAssertionError: C++ assertion "volDummy.empty() && pathDummy.empty()" failed at ./src/common/filename.cpp(568) in Assign(): the file name shouldn't contain the path

This fix reduces the filepath of the ST file the to the filename. Now it works fine.

Fix typos in function names

update links to matiec and beremiz repos in README

fix zoom-in/zoom-out using mouse wheel

regression introduced by 2393:235f847be37e "python3 support: pylint, W1619 #(old-division) division w/o __future__ statement"

better pylint complain workaround

check_sources.sh makes me become even less productive

Added stub axis_s type in EtherLAB CiA402 support code, until Motion Contol Library comes back

Allow using one XSD based target description for many targets. Target description XSD can now use %(target_name)s to refer to target name.

Fix previous commit : Using wx.CallAfter shouldn't have been necessary, and was a symptom of failing evaluator's deadlock detection.

Fix startup of wxGlade base HMI. Wx calls were issued from non-wx thread (main).

Reworked chunk based transfer to support duplicated files (i.e. files with same content, but different names)

Fixed deadlock in runtime's Worker. Was discovered while using WAMP and PYRO simultaneously.

Add a debugger token to SetTraceVariables and GetTraceVariables to prevent crash an inconsistant data in case of multiple connections. Last connection now takes over existing connections's debug, and first connected IDE gets a wrning.

Fixed deadlock when using Wx together with Twisted in runtime.

Split IDE's frame OnCloseFrame() into TryCloseFrame() and OnCloseFrame(), to help further customization

fixed exception happening randomly just after showing discovery panel.

fixed exception happening when connecting to empty URI, and set URI through URI Editor Dialog popping up becaue empty.

Merged Mario's modbus fix : Modbus plugin: reset periodic activation timer when overrun occurs (delays due to communication errors, ...)

Modbus plugin: reset periodic activation timer when overrun occurs (delays due to communication errors, ...)

Disable MDNS:// scheme support. Also prevent discovery pannel to produce some. For now it seems that that feature is unused, and could be a security issue.

Added support to PYROS in Zeroconf discovery and publish. For now, PYRO://mdnsname._tcp.local. URI are broken, and discovery panel generate IP based URI by default.

PyroServer: fixed naming of class, and reorganized methods in order to ease subclassing, in case of customization of service publication on the local network (i.e. zeroconf)

Fix exception dialog with non recognized URI schemes

Fixed runtime's reconnecting loop not stopping when re-configuring WAMP.
In case WAMP was already trying to connect without success and user change WAMP configuration through web interface, previous ReconnectingClient wasn't stopped.

Removed nonsense code, that I should have check more in details before merging m(

Allow easier monkey patching of WAMP connector Session class

Expose new PLCObject API members to WAMP interface.

Use another way to ensure compatibility with Py3 about text type.

Make easier to read console error message in case of connection problem.

PYRO(S): Added timeout on client side to allow unfreezing IDE after some time when communication with target dropped

Enure that autostart blocks other @RunInMain PLCObject methods, and _unblocks_ them once autostart is done...

Fixed Discovery panel in URI Editor dialog : double click works back again, and avoid setting URI to unicode type.

Bigger chunks, from 16k to 1M

Empirically reverted calls done just after NewPLC back to the order as it was before chunked transfer. Apparently I broke something... To be continued

Chunk based transfer for PLC binary and extra files, and some collateral code refactoring.

Fix failing PLC build when building freshly created project that use default libraries blocks. When controller loads libraries according to attibutes in project files (BeremizRoot/Enable_{libname}_Library), use known default if attribute is missing.

Cosmetic change in PSKManagement.py

Fixed ID,last URI, or last connection date not being updated when connnecting to target.

Merged. Some changes that should already have been incuded during previous merge (mostly about PlcStatus) have been included this time.

IDManager : small cosmetic fixes and cleanup.

python3 support: pylint, W1633 # (round-builtin) round built-in referenced

because round behavior is changed to default behavior in Python3
(Banker round). It can cause slight differences in some cases.
Mostly graphical editors are affected, there could be single pixel differences.
Now I couldn't locate any visual differences in test programs.

python3 support: pylint,W1610 # (reduce-builtin) reduce built-in referenced

python3 support: pylint, W1653 # (next-method-defined) next method defined

python3 support: pylint, W1622 # (next-method-called) Called a next() method on an object

python3 support: pylint, W1625 # (raising-string) Raising a string exception

python3 support: pylint, W1624 # (indexing-exception) Indexing exceptions will not work on Python 3

python3 support: pylint, W1611 # (standarderror-builtin) StandardError built-in referenced

python3 support: pylint, W1652 # (deprecated-types-field) Accessing a deprecated fields on the types module

python3 support: pylint, W1651 (deprecated-itertools-function) Accessing a deprecated function on the itertools module

It's even 20% faster, than previous code. On python3 zip is even much more faster.

python3 support: pylint, W1649 # (deprecated-string-function) Accessing a deprecated function on the string module