#!/usr/bin/env python
# -*- coding: utf-8 -*-
#This file is part of PLCOpenEditor, a library implementing an IEC 61131-3 editor
#based on the plcopen standard.
#
#Copyright (C) 2007: Edouard TISSERANT and Laurent BESSARD
#
#See COPYING file for copyrights details.
#
#This library is free software; you can redistribute it and/or
#modify it under the terms of the GNU General Public
#License as published by the Free Software Foundation; either
#version 2.1 of the License, or (at your option) any later version.
#
#This library is distributed in the hope that it will be useful,
#but WITHOUT ANY WARRANTY; without even the implied warranty of
#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
#General Public License for more details.
#
#You should have received a copy of the GNU General Public
#License along with this library; if not, write to the Free Software
#Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
import wx
from time import time as gettime
from math import *
from types import *
import datetime
from threading import Semaphore
#-------------------------------------------------------------------------------
# Common constants
#-------------------------------------------------------------------------------
"""
Definition of constants for dimensions of graphic elements
"""
# FBD and SFC constants
MIN_MOVE = 5 # Minimum move before starting a element dragging
CONNECTOR_SIZE = 8 # Size of connectors
BLOCK_LINE_SIZE = 20 # Minimum size of each line in a block
HANDLE_SIZE = 6 # Size of the squares for handles
ANCHOR_DISTANCE = 5 # Distance where wire is automativally attached to a connector
POINT_RADIUS = 2 # Radius of the point of wire ends
MIN_SEGMENT_SIZE = 2 # Minimum size of the endling segments of a wire
# LD constants
LD_LINE_SIZE = 40 # Distance between two lines in a ladder rung
LD_ELEMENT_SIZE = (21, 15) # Size (width, height) of a ladder element (contact or coil)
LD_WIRE_SIZE = 30 # Size of a wire between two contact
LD_WIRECOIL_SIZE = 70 # Size of a wire between a coil and a contact
LD_POWERRAIL_WIDTH = 3 # Width of a Powerrail
LD_OFFSET = (10, 10) # Distance (x, y) between each comment and rung of the ladder
LD_COMMENT_DEFAULTSIZE = (600, 40) # Size (width, height) of a comment box
# SFC constants
SFC_STEP_DEFAULT_SIZE = (40, 30) # Default size of a SFC step
SFC_TRANSITION_SIZE = (20, 2) # Size of a SFC transition
SFC_DEFAULT_SEQUENCE_INTERVAL = 40 # Default size of the interval between two divergence branches
SFC_SIMULTANEOUS_SEQUENCE_EXTRA = 20 # Size of extra lines for simultaneous divergence and convergence
SFC_JUMP_SIZE = (12, 13) # Size of a SFC jump to step
SFC_WIRE_MIN_SIZE = 25 # Size of a wire between two elements
SFC_ACTION_MIN_SIZE = (100, 30) # Minimum size of an action block line
# Type definition constants for graphic elements
[INPUT, OUTPUT, INOUT] = range(3)
[CONNECTOR, CONTINUATION] = range(2)
[LEFTRAIL, RIGHTRAIL] = range(2)
[CONTACT_NORMAL, CONTACT_REVERSE, CONTACT_RISING, CONTACT_FALLING] = range(4)
[COIL_NORMAL, COIL_REVERSE, COIL_SET, COIL_RESET, COIL_RISING, COIL_FALLING] = range(6)
[SELECTION_DIVERGENCE, SELECTION_CONVERGENCE, SIMULTANEOUS_DIVERGENCE, SIMULTANEOUS_CONVERGENCE] = range(4)
# Constants for defining the type of dragging that has been selected
[HANDLE_MOVE, HANDLE_RESIZE, HANDLE_POINT, HANDLE_SEGMENT, HANDLE_CONNECTOR] = range(5)
# List of value for resize handle that are valid
VALID_HANDLES = [(1,1), (1,2), (1,3), (2,3), (3,3), (3,2), (3,1), (2,1)]
# Contants for defining the direction of a connector
[EAST, NORTH, WEST, SOUTH] = [(1,0), (0,-1), (-1,0), (0,1)]
# Contants for defining which mode is selected for each view
[MODE_SELECTION, MODE_BLOCK, MODE_VARIABLE, MODE_CONNECTION, MODE_COMMENT,
MODE_COIL, MODE_CONTACT, MODE_POWERRAIL, MODE_INITIALSTEP, MODE_STEP,
MODE_TRANSITION, MODE_DIVERGENCE, MODE_JUMP, MODE_ACTION, MODE_MOTION] = range(15)
# Contants for defining alignment types for graphic group
[ALIGN_LEFT, ALIGN_CENTER, ALIGN_RIGHT, ALIGN_TOP, ALIGN_MIDDLE, ALIGN_BOTTOM] = range(6)
# Contants for defining which drawing mode is selected for app
[FREEDRAWING_MODE, DRIVENDRAWING_MODE] = [1, 2]
# Color for Highlighting
HIGHLIGHTCOLOR = wx.CYAN
# Define highlight types
ERROR_HIGHLIGHT = (wx.Colour(255, 255, 0), wx.RED)
SEARCH_RESULT_HIGHLIGHT = (wx.Colour(255, 165, 0), wx.WHITE)
# Define highlight refresh inhibition period in second
REFRESH_HIGHLIGHT_PERIOD = 0.1
# Define tooltip wait for displaying period in second
TOOLTIP_WAIT_PERIOD = 0.5
HANDLE_CURSORS = {
(1, 1) : 2,
(3, 3) : 2,
(1, 3) : 3,
(3, 1) : 3,
(1, 2) : 4,
(3, 2) : 4,
(2, 1) : 5,
(2, 3) : 5
}
def round_scaling(x, n, constraint=0):
fraction = float(x) / float(n)
if constraint == - 1:
xround = int(fraction)
else:
xround = round(fraction)
if constraint == 1 and int(fraction) == xround:
xround += 1
return xround * n
"""
Basic vector operations for calculate wire points
"""
# Create a vector from two points and define if vector must be normal
def vector(p1, p2, normal = True):
vector = (p2.x - p1.x, p2.y - p1.y)
if normal:
return normalize(vector)
return vector
# Calculate the norm of a given vector
def norm(v):
return sqrt(v[0] * v[0] + v[1] * v[1])
# Normalize a given vector
def normalize(v):
v_norm = norm(v)
# Verifie if it is not a null vector
if v_norm > 0:
return (v[0] / v_norm, v[1] / v_norm)
else:
return v
# Calculate the scalar product of two vectors
def is_null_vector(v):
return v == (0, 0)
# Calculate the scalar product of two vectors
def add_vectors(v1, v2):
return (v1[0] + v2[0], v1[1] + v2[1])
# Calculate the scalar product of two vectors
def product(v1, v2):
return v1[0] * v2[0] + v1[1] * v2[1]
"""
Function that calculates the nearest point of the grid defined by scaling for the given point
"""
def GetScaledEventPosition(event, dc, scaling):
pos = event.GetLogicalPosition(dc)
if scaling:
pos.x = round(float(pos.x) / float(scaling[0])) * scaling[0]
pos.y = round(float(pos.y) / float(scaling[1])) * scaling[1]
return pos
"""
Function that choose a direction during the wire points generation
"""
def DirectionChoice(v_base, v_target, dir_target):
dir_product = product(v_base, v_target)
if dir_product < 0:
return (-v_base[0], -v_base[1])
elif dir_product == 0 and product(v_base, dir_target) != 0:
return dir_target
return v_base
SECOND = 1000000
MINUTE = 60 * SECOND
HOUR = 60 * MINUTE
DAY = 24 * HOUR
def generate_time(value):
microseconds = float(value.days * DAY + value.seconds * SECOND + value.microseconds)
negative = microseconds < 0
microseconds = abs(microseconds)
data = "T#"
not_null = False
if negative:
data += "-"
for val, format in [(int(microseconds) / DAY, "%dd"),
((int(microseconds) % DAY) / HOUR, "%dh"),
((int(microseconds) % HOUR) / MINUTE, "%dm"),
((int(microseconds) % MINUTE) / SECOND, "%ds")]:
if val > 0 or not_null:
data += format % val
not_null = True
data += "%gms" % (microseconds % SECOND / 1000.)
return data
def generate_date(value):
base_date = datetime.datetime(1970, 1, 1)
date = base_date + value
return date.strftime("DATE#%Y-%m-%d")
def generate_datetime(value):
base_date = datetime.datetime(1970, 1, 1)
date_time = base_date + value
return date_time.strftime("DT#%Y-%m-%d-%H:%M:%S.%f")
def generate_timeofday(value):
microseconds = float(value.days * DAY + value.seconds * SECOND + value.microseconds)
negative = microseconds < 0
microseconds = abs(microseconds)
data = "TOD#"
for val, format in [(int(microseconds) / HOUR, "%2.2d:"),
((int(microseconds) % HOUR) / MINUTE, "%2.2d:"),
((int(microseconds) % MINUTE) / SECOND, "%2.2d."),
(microseconds % SECOND, "%6.6d")]:
data += format % val
return data
TYPE_TRANSLATOR = {"TIME": generate_time,
"DATE": generate_date,
"DT": generate_datetime,
"TOD": generate_timeofday}
def MiterPen(colour, width=1, style=wx.SOLID):
pen = wx.Pen(colour, width, style)
pen.SetJoin(wx.JOIN_MITER)
pen.SetCap(wx.CAP_PROJECTING)
return pen
#-------------------------------------------------------------------------------
# Debug Data Consumer Class
#-------------------------------------------------------------------------------
class DebugDataConsumer:
def __init__(self):
self.LastValue = None
self.Value = None
self.DataType = None
self.LastForced = False
self.Forced = False
self.Inhibited = False
def Inhibit(self, inhibit):
self.Inhibited = inhibit
if not inhibit and self.LastValue is not None:
self.SetForced(self.LastForced)
self.SetValue(self.LastValue)
self.LastValue = None
def SetDataType(self, data_type):
self.DataType = data_type
def NewValue(self, tick, value, forced=False):
value = TYPE_TRANSLATOR.get(self.DataType, lambda x:x)(value)
if self.Inhibited:
self.LastValue = value
self.LastForced = forced
else:
self.SetForced(forced)
self.SetValue(value)
def SetValue(self, value):
self.Value = value
def GetValue(self):
return self.Value
def SetForced(self, forced):
self.Forced = forced
def IsForced(self):
return self.Forced
#-------------------------------------------------------------------------------
# Debug Viewer Class
#-------------------------------------------------------------------------------
REFRESH_PERIOD = 0.1
class DebugViewer:
def __init__(self, producer, debug, register_tick=True):
self.DataProducer = None
self.Debug = debug
self.RegisterTick = register_tick
self.Inhibited = False
self.DataConsumers = {}
self.LastRefreshTime = gettime()
self.RefreshLock = Semaphore()
self.RefreshTimer = wx.Timer(self, -1)
self.Bind(wx.EVT_TIMER, self.OnRefreshTimer, self.RefreshTimer)
self.SetDataProducer(producer)
def __del__(self):
self.DataProducer = None
self.DeleteDataConsumers()
self.RefreshTimer.Stop()
def SetDataProducer(self, producer):
if self.RegisterTick and self.Debug:
if producer is not None:
producer.SubscribeDebugIECVariable("__tick__", self)
if self.DataProducer is not None:
self.DataProducer.UnsubscribeDebugIECVariable("__tick__", self)
self.DataProducer = producer
def IsDebugging(self):
return self.Debug
def Inhibit(self, inhibit):
for consumer, iec_path in self.DataConsumers.iteritems():
consumer.Inhibit(inhibit)
self.Inhibited = inhibit
def AddDataConsumer(self, iec_path, consumer):
if self.DataProducer is None:
return None
result = self.DataProducer.SubscribeDebugIECVariable(iec_path, consumer)
if result is not None and consumer != self:
self.DataConsumers[consumer] = iec_path
consumer.SetDataType(self.GetDataType(iec_path))
return result
def RemoveDataConsumer(self, consumer):
iec_path = self.DataConsumers.pop(consumer, None)
if iec_path is not None:
self.DataProducer.UnsubscribeDebugIECVariable(iec_path, consumer)
def GetDataType(self, iec_path):
if self.DataProducer is not None:
return self.DataProducer.GetDebugIECVariableType(iec_path)
return None
def ForceDataValue(self, iec_path, value):
if self.DataProducer is not None:
self.DataProducer.ForceDebugIECVariable(iec_path, value)
def ReleaseDataValue(self, iec_path):
if self.DataProducer is not None:
self.DataProducer.ReleaseDebugIECVariable(iec_path)
def DeleteDataConsumers(self):
if self.DataProducer is not None:
for consumer, iec_path in self.DataConsumers.iteritems():
self.DataProducer.UnsubscribeDebugIECVariable(iec_path, consumer)
self.DataConsumers = {}
def OnRefreshTimer(self, event):
self.RefreshNewData()
event.Skip()
def NewDataAvailable(self, *args, **kwargs):
self.RefreshTimer.Stop()
if not self.Inhibited:
current_time = gettime()
if current_time - self.LastRefreshTime > REFRESH_PERIOD and self.RefreshLock.acquire(False):
self.LastRefreshTime = gettime()
self.Inhibit(True)
wx.CallAfter(self.RefreshViewOnNewData, *args, **kwargs)
def RefreshViewOnNewData(self, *args, **kwargs):
if self:
self.RefreshNewData(*args, **kwargs)
self.RefreshTimer.Start(int(REFRESH_PERIOD * 1000), oneShot=True)
def RefreshNewData(self, *args, **kwargs):
self.Inhibit(False)
self.RefreshLock.release()
#-------------------------------------------------------------------------------
# Viewer Rubberband
#-------------------------------------------------------------------------------
"""
Class that implements a rubberband
"""
class RubberBand:
# Create a rubberband by indicated on which window it must be drawn
def __init__(self, viewer):
self.Viewer = viewer
self.drawingSurface = viewer.Editor
self.Reset()
# Method that initializes the internal attributes of the rubberband
def Reset(self):
self.startPoint = None
self.currentBox = None
self.lastBox = None
# Method that return if a box is currently edited
def IsShown(self):
return self.currentBox != None
# Method that returns the currently edited box
def GetCurrentExtent(self):
if self.currentBox is None:
return self.lastBox
return self.currentBox
# Method called when a new box starts to be edited
def OnLeftDown(self, event, dc, scaling):
pos = GetScaledEventPosition(event, dc, scaling)
# Save the point for calculate the box position and size
self.startPoint = pos
self.currentBox = wx.Rect(pos.x, pos.y, 0, 0)
self.drawingSurface.SetCursor(wx.StockCursor(wx.CURSOR_CROSS))
self.Redraw()
# Method called when dragging with a box edited
def OnMotion(self, event, dc, scaling):
pos = GetScaledEventPosition(event, dc, scaling)
# Save the last position and size of the box for erasing it
self.lastBox = wx.Rect(self.currentBox.x, self.currentBox.y, self.currentBox.width,
self.currentBox.height)
# Calculate new position and size of the box
if pos.x >= self.startPoint.x:
self.currentBox.x = self.startPoint.x
self.currentBox.width = pos.x - self.startPoint.x + 1
else:
self.currentBox.x = pos.x
self.currentBox.width = self.startPoint.x - pos.x + 1
if pos.y >= self.startPoint.y:
self.currentBox.y = self.startPoint.y
self.currentBox.height = pos.y - self.startPoint.y + 1
else:
self.currentBox.y = pos.y
self.currentBox.height = self.startPoint.y - pos.y + 1
self.Redraw()
# Method called when dragging is stopped
def OnLeftUp(self, event, dc, scaling):
self.drawingSurface.SetCursor(wx.NullCursor)
self.lastBox = self.currentBox
self.currentBox = None
self.Redraw()
# Method that erase the last box and draw the new box
def Redraw(self, dc = None):
if dc is None:
dc = self.Viewer.GetLogicalDC()
scalex, scaley = dc.GetUserScale()
dc.SetUserScale(1, 1)
dc.SetPen(wx.Pen(wx.WHITE, 1, wx.DOT))
dc.SetBrush(wx.TRANSPARENT_BRUSH)
dc.SetLogicalFunction(wx.XOR)
if self.lastBox:
# Erase last box
dc.DrawRectangle(self.lastBox.x * scalex, self.lastBox.y * scaley,
self.lastBox.width * scalex, self.lastBox.height * scaley)
if self.currentBox:
# Draw current box
dc.DrawRectangle(self.currentBox.x * scalex, self.currentBox.y * scaley,
self.currentBox.width * scalex, self.currentBox.height * scaley)
dc.SetUserScale(scalex, scaley)
# Erase last box
def Erase(self, dc = None):
if dc is None:
dc = self.Viewer.GetLogicalDC()
scalex, scaley = dc.GetUserScale()
dc.SetUserScale(1, 1)
dc.SetPen(wx.Pen(wx.WHITE, 1, wx.DOT))
dc.SetBrush(wx.TRANSPARENT_BRUSH)
dc.SetLogicalFunction(wx.XOR)
if self.lastBox:
dc.DrawRectangle(self.lastBox.x * scalex, self.lastBox.y * scaley,
self.lastBox.width * scalex, self.lastBox.height * scalex)
dc.SetUserScale(scalex, scaley)
# Draw current box
def Draw(self, dc = None):
if dc is None:
dc = self.Viewer.GetLogicalDC()
scalex, scaley = dc.GetUserScale()
dc.SetUserScale(1, 1)
dc.SetPen(wx.Pen(wx.WHITE, 1, wx.DOT))
dc.SetBrush(wx.TRANSPARENT_BRUSH)
dc.SetLogicalFunction(wx.XOR)
if self.currentBox:
# Draw current box
dc.DrawRectangle(self.currentBox.x * scalex, self.currentBox.y * scaley,
self.currentBox.width * scalex, self.currentBox.height * scaley)
dc.SetUserScale(scalex, scaley)
#-------------------------------------------------------------------------------
# Viewer ToolTip
#-------------------------------------------------------------------------------
"""
Class that implements a custom tool tip
"""
if wx.Platform == '__WXMSW__':
faces = { 'times': 'Times New Roman',
'mono' : 'Courier New',
'helv' : 'Arial',
'other': 'Comic Sans MS',
'size' : 10,
}
else:
faces = { 'times': 'Times',
'mono' : 'Courier',
'helv' : 'Helvetica',
'other': 'new century schoolbook',
'size' : 12,
}
TOOLTIP_MAX_CHARACTERS = 30
TOOLTIP_MAX_LINE = 5
class ToolTip(wx.PopupWindow):
def __init__(self, parent, tip):
wx.PopupWindow.__init__(self, parent)
self.CurrentPosition = wx.Point(0, 0)
self.SetBackgroundStyle(wx.BG_STYLE_CUSTOM)
self.SetTip(tip)
self.Bind(wx.EVT_PAINT, self.OnPaint)
def SetTip(self, tip):
lines = []
for line in tip.splitlines():
if line != "":
words = line.split()
new_line = words[0]
for word in words[1:]:
if len(new_line + " " + word) <= TOOLTIP_MAX_CHARACTERS:
new_line += " " + word
else:
lines.append(new_line)
new_line = word
lines.append(new_line)
else:
lines.append(line)
if len(lines) > TOOLTIP_MAX_LINE:
self.Tip = lines[:TOOLTIP_MAX_LINE]
if len(self.Tip[-1]) < TOOLTIP_MAX_CHARACTERS - 3:
self.Tip[-1] += "..."
else:
self.Tip[-1] = self.Tip[-1][:TOOLTIP_MAX_CHARACTERS - 3] + "..."
else:
self.Tip = lines
wx.CallAfter(self.RefreshTip)
def MoveToolTip(self, pos):
self.CurrentPosition = pos
self.SetPosition(pos)
def GetTipExtent(self):
max_width = 0
max_height = 0
for line in self.Tip:
w, h = self.GetTextExtent(line)
max_width = max(max_width, w)
max_height += h
return max_width, max_height
def RefreshTip(self):
if self:
w, h = self.GetTipExtent()
self.SetSize(wx.Size(w + 4, h + 4))
self.SetPosition(self.CurrentPosition)
self.Refresh()
def OnPaint(self, event):
dc = wx.AutoBufferedPaintDC(self)
dc.Clear()
dc.SetPen(MiterPen(wx.BLACK))
dc.SetBrush(wx.Brush(wx.Colour(255, 238, 170)))
dc.SetFont(wx.Font(faces["size"], wx.SWISS, wx.NORMAL, wx.NORMAL, faceName = faces["mono"]))
dc.BeginDrawing()
w, h = self.GetTipExtent()
dc.DrawRectangle(0, 0, w + 4, h + 4)
offset = 0
for line in self.Tip:
dc.DrawText(line, 2, offset + 2)
w, h = dc.GetTextExtent(line)
offset += h
dc.EndDrawing()
event.Skip()
#-------------------------------------------------------------------------------
# Helpers for highlighting text
#-------------------------------------------------------------------------------
def AddHighlight(highlights, infos):
RemoveHighlight(highlights, infos)
highlights.append(infos)
def RemoveHighlight(highlights, infos):
if infos in highlights:
highlights.remove(infos)
return True
return False
def ClearHighlight(highlights, highlight_type=None):
if highlight_type is not None:
return [highlight for highlight in highlights if highlight[2] != highlight_type]
return []
def DrawHighlightedText(dc, text, highlights, x, y):
current_pen = dc.GetPen()
dc.SetPen(wx.TRANSPARENT_PEN)
for start, end, highlight_type in highlights:
dc.SetBrush(wx.Brush(highlight_type[0]))
offset_width, offset_height = dc.GetTextExtent(text[:start[1]])
part = text[start[1]:end[1] + 1]
part_width, part_height = dc.GetTextExtent(part)
dc.DrawRectangle(x + offset_width, y, part_width, part_height)
dc.SetTextForeground(highlight_type[1])
dc.DrawText(part, x + offset_width, y)
dc.SetPen(current_pen)
dc.SetTextForeground(wx.BLACK)
#-------------------------------------------------------------------------------
# Graphic element base class
#-------------------------------------------------------------------------------
"""
Class that implements a generic graphic element
"""
class Graphic_Element:
# Create a new graphic element
def __init__(self, parent, id = None):
self.Parent = parent
self.Id = id
self.oldPos = None
self.StartPos = None
self.CurrentDrag = None
self.Handle = (None,None)
self.Dragging = False
self.Selected = False
self.Highlighted = False
self.Pos = wx.Point(0, 0)
self.Size = wx.Size(0, 0)
self.BoundingBox = wx.Rect(0, 0, 0, 0)
self.Visible = False
self.ToolTip = None
self.ToolTipPos = None
self.ToolTipTimer = wx.Timer(self.Parent, -1)
self.Parent.Bind(wx.EVT_TIMER, self.OnToolTipTimer, self.ToolTipTimer)
def __del__(self):
self.ToolTipTimer.Stop()
def GetDefinition(self):
return [self.Id], []
def TestVisible(self, screen):
self.Visible = self.GetRedrawRect().Intersects(screen)
def IsVisible(self):
return self.Visible
def SpreadCurrent(self):
pass
def GetConnectorTranslation(self, element):
return {}
def FindNearestConnector(self, position, connectors):
distances = []
for connector in connectors:
connector_pos = connector.GetRelPosition()
distances.append((sqrt((self.Pos.x + connector_pos.x - position.x) ** 2 +
(self.Pos.y + connector_pos.y - position.y) ** 2),
connector))
distances.sort()
if len(distances) > 0:
return distances[0][1]
return None
def IsOfType(self, type, reference):
return self.Parent.IsOfType(type, reference)
def IsEndType(self, type):
return self.Parent.IsEndType(type)
def GetDragging(self):
return self.Dragging
# Make a clone of this element
def Clone(self, parent):
return Graphic_Element(parent, self.Id)
# Changes the block position
def SetPosition(self, x, y):
self.Pos.x = x
self.Pos.y = y
self.RefreshConnected()
self.RefreshBoundingBox()
# Returns the block position
def GetPosition(self):
return self.Pos.x, self.Pos.y
# Changes the element size
def SetSize(self, width, height):
self.Size.SetWidth(width)
self.Size.SetHeight(height)
self.RefreshConnectors()
self.RefreshBoundingBox()
# Returns the element size
def GetSize(self):
return self.Size.GetWidth(), self.Size.GetHeight()
# Returns the minimum element size
def GetMinSize(self):
return 0, 0
# Refresh the element Bounding Box
def RefreshBoundingBox(self):
self.BoundingBox = wx.Rect(self.Pos.x, self.Pos.y, self.Size[0], self.Size[1])
# Refresh the element connectors position
def RefreshConnectors(self):
pass
# Refresh the position of wires connected to element inputs and outputs
def RefreshConnected(self):
pass
# Change the parent
def SetParent(self, parent):
self.Parent = parent
# Override this method for defining the method to call for deleting this element
def Delete(self):
pass
# Returns the Id
def GetId(self):
return self.Id
# Returns if the point given is in the bounding box
def HitTest(self, pt, connectors=True):
if connectors:
rect = self.BoundingBox
else:
rect = wx.Rect(self.Pos.x, self.Pos.y, self.Size[0], self.Size[1])
return rect.InsideXY(pt.x, pt.y)
# Returns if the point given is in the bounding box
def IsInSelection(self, rect):
return rect.InsideXY(self.BoundingBox.x, self.BoundingBox.y) and rect.InsideXY(self.BoundingBox.x + self.BoundingBox.width, self.BoundingBox.y + self.BoundingBox.height)
# Override this method for refreshing the bounding box
def RefreshBoundingBox(self):
pass
# Returns the bounding box
def GetBoundingBox(self):
return self.BoundingBox
# Returns the RedrawRect
def GetRedrawRect(self, movex = 0, movey = 0):
scalex, scaley = self.Parent.GetViewScale()
rect = wx.Rect()
rect.x = self.BoundingBox.x - int(HANDLE_SIZE / scalex) - 3 - abs(movex)
rect.y = self.BoundingBox.y - int(HANDLE_SIZE / scaley) - 3 - abs(movey)
rect.width = self.BoundingBox.width + 2 * (int(HANDLE_SIZE / scalex) + abs(movex) + 1) + 4
rect.height = self.BoundingBox.height + 2 * (int(HANDLE_SIZE / scaley) + abs(movey) + 1) + 4
return rect
def Refresh(self, rect = None):
if self.Visible:
if rect is not None:
self.Parent.RefreshRect(self.Parent.GetScrolledRect(rect), False)
else:
self.Parent.RefreshRect(self.Parent.GetScrolledRect(self.GetRedrawRect()), False)
# Change the variable that indicates if this element is selected
def SetSelected(self, selected):
self.Selected = selected
self.Refresh()
# Change the variable that indicates if this element is highlighted
def SetHighlighted(self, highlighted):
self.Highlighted = highlighted
self.Refresh()
# Test if the point is on a handle of this element
def TestHandle(self, event):
dc = self.Parent.GetLogicalDC()
scalex, scaley = dc.GetUserScale()
pos = event.GetPosition()
pt = wx.Point(*self.Parent.CalcUnscrolledPosition(pos.x, pos.y))
left = (self.BoundingBox.x - 2) * scalex - HANDLE_SIZE
center = (self.BoundingBox.x + self.BoundingBox.width / 2) * scalex - HANDLE_SIZE / 2
right = (self.BoundingBox.x + self.BoundingBox.width + 2) * scalex
top = (self.BoundingBox.y - 2) * scaley - HANDLE_SIZE
middle = (self.BoundingBox.y + self.BoundingBox.height / 2) * scaley - HANDLE_SIZE / 2
bottom = (self.BoundingBox.y + self.BoundingBox.height + 2) * scaley
extern_rect = wx.Rect(left, top, right + HANDLE_SIZE - left, bottom + HANDLE_SIZE - top)
intern_rect = wx.Rect(left + HANDLE_SIZE, top + HANDLE_SIZE, right - left - HANDLE_SIZE, bottom - top - HANDLE_SIZE)
# Verify that this element is selected
if self.Selected and extern_rect.InsideXY(pt.x, pt.y) and not intern_rect.InsideXY(pt.x, pt.y):
# Find if point is on a handle horizontally
if left <= pt.x < left + HANDLE_SIZE:
handle_x = 1
elif center <= pt.x < center + HANDLE_SIZE:
handle_x = 2
elif right <= pt.x < right + HANDLE_SIZE:
handle_x = 3
else:
handle_x = 0
# Find if point is on a handle vertically
if top <= pt.y < top + HANDLE_SIZE:
handle_y = 1
elif middle <= pt.y < middle + HANDLE_SIZE:
handle_y = 2
elif bottom <= pt.y < bottom + HANDLE_SIZE:
handle_y = 3
else:
handle_y = 0
# Verify that the result is valid
if (handle_x, handle_y) in VALID_HANDLES:
return handle_x, handle_y
return 0, 0
# Method called when a LeftDown event have been generated
def OnLeftDown(self, event, dc, scaling):
pos = event.GetLogicalPosition(dc)
# Test if an handle have been clicked
handle = self.TestHandle(event)
# Find which type of handle have been clicked,
# Save a resize event and change the cursor
cursor = HANDLE_CURSORS.get(handle, 1)
wx.CallAfter(self.Parent.SetCurrentCursor, cursor)
if cursor > 1:
self.Handle = (HANDLE_RESIZE, handle)
else:
self.Handle = (HANDLE_MOVE, None)
self.SetSelected(False)
# Initializes the last position
self.oldPos = GetScaledEventPosition(event, dc, scaling)
self.StartPos = wx.Point(self.Pos.x, self.Pos.y)
self.CurrentDrag = wx.Point(0, 0)
# Method called when a LeftUp event have been generated
def OnLeftUp(self, event, dc, scaling):
# If a dragging have been initiated
if self.Dragging and self.oldPos:
self.RefreshModel()
self.Parent.RefreshBuffer()
wx.CallAfter(self.Parent.SetCurrentCursor, 0)
self.SetSelected(True)
self.oldPos = None
# Method called when a RightDown event have been generated
def OnRightDown(self, event, dc, scaling):
pass
# Method called when a RightUp event have been generated
def OnRightUp(self, event, dc, scaling):
if self.Dragging and self.oldPos:
self.RefreshModel()
self.Parent.RefreshBuffer()
wx.CallAfter(self.Parent.SetCurrentCursor, 0)
self.SetSelected(True)
self.oldPos = None
if self.Parent.Debug:
self.Parent.PopupForceMenu()
# Method called when a LeftDClick event have been generated
def OnLeftDClick(self, event, dc, scaling):
pass
# Method called when a Motion event have been generated
def OnMotion(self, event, dc, scaling):
# If the cursor is dragging and the element have been clicked
if event.Dragging() and self.oldPos:
# Calculate the movement of cursor
pos = event.GetLogicalPosition(dc)
movex = pos.x - self.oldPos.x
movey = pos.y - self.oldPos.y
# If movement is greater than MIN_MOVE then a dragging is initiated
if not self.Dragging and (abs(movex) > MIN_MOVE or abs(movey) > MIN_MOVE):
self.Dragging = True
# If a dragging have been initiated, refreshes the element state
if self.Dragging:
dragx, dragy = self.ProcessDragging(movex, movey, event, scaling)
if event.ControlDown() and self.Handle[0] == HANDLE_MOVE:
self.oldPos.x = self.StartPos.x + self.CurrentDrag.x
self.oldPos.y = self.StartPos.y + self.CurrentDrag.y
else:
self.oldPos.x += dragx
self.oldPos.y += dragy
return dragx, dragy
return movex, movey
# If cursor just pass over the element, changes the cursor if it is on a handle
else:
pos = event.GetLogicalPosition(dc)
handle = self.TestHandle(event)
# Find which type of handle have been clicked,
# Save a resize event and change the cursor
cursor = HANDLE_CURSORS.get(handle, 0)
wx.CallAfter(self.Parent.SetCurrentCursor, cursor)
return 0, 0
# Moves the element
def Move(self, dx, dy, exclude = []):
self.Pos.x += max(-self.BoundingBox.x, dx)
self.Pos.y += max(-self.BoundingBox.y, dy)
self.RefreshConnected(exclude)
self.RefreshBoundingBox()
# Resizes the element from position and size given
def Resize(self, x, y, width, height):
self.Move(x, y)
self.SetSize(width, height)
# Moves and Resizes the element for fitting scaling
def AdjustToScaling(self, scaling):
if scaling is not None:
movex = round_scaling(self.Pos.x, scaling[0]) - self.Pos.x
movey = round_scaling(self.Pos.y, scaling[1]) - self.Pos.y
min_width, min_height = self.GetMinSize()
width = max(round_scaling(min_width, scaling[0], 1),
round_scaling(self.Size.width, scaling[0]))
height = max(round_scaling(min_height, scaling[1], 1),
round_scaling(self.Size.height, scaling[1]))
self.Resize(movex, movey, width, height)
return movex, movey
return 0, 0
# Refreshes the element state according to move defined and handle selected
def ProcessDragging(self, movex, movey, event, scaling, width_fac = 1, height_fac = 1):
handle_type, handle = self.Handle
# If it is a resize handle, calculate the values from resizing
if handle_type == HANDLE_RESIZE:
if scaling is not None:
scaling = (scaling[0] * width_fac, scaling[1] * height_fac)
x = y = start_x = start_y = 0
width, height = start_width, start_height = self.GetSize()
if handle[0] == 1:
movex = max(-self.BoundingBox.x, movex)
if scaling is not None:
movex = -(round_scaling(width - movex, scaling[0]) - width)
x = movex
if event.ShiftDown():
width -= 2 * movex
else:
width -= movex
elif handle[0] == 3:
if scaling is not None:
movex = round_scaling(width + movex, scaling[0]) - width
if event.ShiftDown():
movex = min(self.BoundingBox.x, movex)
x = -movex
width += 2 * movex
else:
width += movex
if handle[1] == 1:
movey = max(-self.BoundingBox.y, movey)
if scaling is not None:
movey = -(round_scaling(height - movey, scaling[1]) - height)
y = movey
if event.ShiftDown():
height -= 2 * movey
else:
height -= movey
elif handle[1] == 3:
if scaling is not None:
movey = round_scaling(height + movey, scaling[1]) - height
if event.ShiftDown():
movey = min(self.BoundingBox.y, movey)
y = -movey
height += 2 * movey
else:
height += movey
# Verify that new size is not lesser than minimum
min_width, min_height = self.GetMinSize()
if handle[0] != 2 and (width >= min_width or width > self.Size[0]):
start_x = x
start_width = width
else:
movex = 0
if handle[1] != 2 and (height >= min_height or height > self.Size[1]):
start_y = y
start_height = height
else:
movey = 0
if movex != 0 or movey != 0:
self.Resize(start_x, start_y, start_width, start_height)
return movex, movey
# If it is a move handle, Move this element
elif handle_type == HANDLE_MOVE:
movex = max(-self.BoundingBox.x, movex)
movey = max(-self.BoundingBox.y, movey)
if scaling is not None:
movex = round_scaling(self.Pos.x + movex, scaling[0]) - self.Pos.x
movey = round_scaling(self.Pos.y + movey, scaling[1]) - self.Pos.y
if event.ControlDown():
self.CurrentDrag.x = self.CurrentDrag.x + movex
self.CurrentDrag.y = self.CurrentDrag.y + movey
if abs(self.CurrentDrag.x) > abs(self.CurrentDrag.y):
movex = self.StartPos.x + self.CurrentDrag.x - self.Pos.x
movey = self.StartPos.y - self.Pos.y
else:
movex = self.StartPos.x - self.Pos.x
movey = self.StartPos.y + self.CurrentDrag.y - self.Pos.y
self.Move(movex, movey)
return movex, movey
return 0, 0
def OnToolTipTimer(self, event):
value = self.GetToolTipValue()
if value is not None and self.ToolTipPos is not None:
self.ToolTip = ToolTip(self.Parent, value)
self.ToolTip.MoveToolTip(self.ToolTipPos)
self.ToolTip.Show()
def GetToolTipValue(self):
return None
def CreateToolTip(self, pos):
value = self.GetToolTipValue()
if value is not None:
self.ToolTipPos = pos
self.ToolTipTimer.Start(int(TOOLTIP_WAIT_PERIOD * 1000), oneShot=True)
def MoveToolTip(self, pos):
if self.ToolTip is not None:
self.ToolTip.MoveToolTip(pos)
elif self.ToolTipPos is not None:
self.ToolTipPos = pos
self.ToolTipTimer.Start(int(TOOLTIP_WAIT_PERIOD * 1000), oneShot=True)
def ClearToolTip(self):
self.ToolTipTimer.Stop()
self.ToolTipPos = None
if self.ToolTip is not None:
self.ToolTip.Destroy()
self.ToolTip = None
# Override this method for defining the method to call for adding an highlight to this element
def AddHighlight(self, infos, start, end, highlight_type):
pass
# Override this method for defining the method to call for removing an highlight from this element
def RemoveHighlight(self, infos, start, end, highlight_type):
pass
# Override this method for defining the method to call for removing all the highlights of one particular type from this element
def ClearHighlight(self, highlight_type=None):
pass
# Override this method for defining the method to call for refreshing the model of this element
def RefreshModel(self, move=True):
pass
# Draws the highlightment of this element if it is highlighted (can be overwritten)
def DrawHighlightment(self, dc):
scalex, scaley = dc.GetUserScale()
dc.SetUserScale(1, 1)
dc.SetPen(MiterPen(HIGHLIGHTCOLOR))
dc.SetBrush(wx.Brush(HIGHLIGHTCOLOR))
dc.SetLogicalFunction(wx.AND)
dc.DrawRectangle(int(round((self.Pos.x - 1) * scalex)) - 2,
int(round((self.Pos.y - 1) * scaley)) - 2,
int(round((self.Size.width + 3) * scalex)) + 5,
int(round((self.Size.height + 3) * scaley)) + 5)
dc.SetLogicalFunction(wx.COPY)
dc.SetUserScale(scalex, scaley)
# Draws the handles of this element if it is selected
def Draw(self, dc):
if not getattr(dc, "printing", False):
if self.Highlighted:
self.DrawHighlightment(dc)
if self.Selected:
scalex, scaley = dc.GetUserScale()
dc.SetUserScale(1, 1)
dc.SetPen(MiterPen(wx.BLACK))
dc.SetBrush(wx.BLACK_BRUSH)
left = (self.BoundingBox.x - 2) * scalex - HANDLE_SIZE
center = (self.BoundingBox.x + self.BoundingBox.width / 2) * scalex - HANDLE_SIZE / 2
right = (self.BoundingBox.x + self.BoundingBox.width + 2) * scalex
top = (self.BoundingBox.y - 2) * scaley - HANDLE_SIZE
middle = (self.BoundingBox.y + self.BoundingBox.height / 2) * scaley - HANDLE_SIZE / 2
bottom = (self.BoundingBox.y + self.BoundingBox.height + 2) * scaley
for x, y in [(left, top), (center, top), (right, top),
(left, middle), (right, middle),
(left, bottom), (center, bottom), (right, bottom)]:
dc.DrawRectangle(x, y, HANDLE_SIZE, HANDLE_SIZE)
dc.SetUserScale(scalex, scaley)
#-------------------------------------------------------------------------------
# Group of graphic elements
#-------------------------------------------------------------------------------
"""
Class that implements a group of graphic elements
"""
class Graphic_Group(Graphic_Element):
# Create a new group of graphic elements
def __init__(self, parent):
Graphic_Element.__init__(self, parent)
self.Elements = []
self.RefreshWireExclusion()
self.RefreshBoundingBox()
# Destructor
def __del__(self):
self.Elements = []
def GetDefinition(self):
blocks = []
wires = []
for element in self.Elements:
block, wire = element.GetDefinition()
blocks.extend(block)
wires.extend(wire)
return blocks, wires
# Make a clone of this element
def Clone(self, parent, pos = None):
group = Graphic_Group(parent)
connectors = {}
exclude_names = {}
wires = []
if pos is not None:
dx, dy = pos.x - self.BoundingBox.x, pos.y - self.BoundingBox.y
for element in self.Elements:
if isinstance(element, Wire):
wires.append(element)
else:
if pos is not None:
x, y = element.GetPosition()
new_pos = wx.Point(x + dx, y + dy)
newid = parent.GetNewId()
if parent.IsNamedElement(element):
name = parent.GenerateNewName(element, exclude_names)
exclude_names[name.upper()] = True
new_element = element.Clone(parent, newid, name, pos = new_pos)
else:
new_element = element.Clone(parent, newid, pos = new_pos)
new_element.AdjustToScaling(parent.Scaling)
else:
new_element = element.Clone(parent)
connectors.update(element.GetConnectorTranslation(new_element))
group.SelectElement(new_element)
for element in wires:
if pos is not None:
new_wire = element.Clone(parent, connectors, dx, dy)
else:
new_wire = element.Clone(parent, connectors)
if new_wire is not None:
if pos is not None:
parent.AddWire(new_wire)
group.SelectElement(new_wire)
if pos is not None:
for element in group.Elements:
if not isinstance(element, Wire):
parent.AddBlockInModel(element)
return group
def CanAddBlocks(self, parent):
valid = True
for element in self.Elements:
if not isinstance(element, Wire):
valid &= parent.CanAddElement(element)
return valid
def IsVisible(self):
for element in self.Elements:
if element.IsVisible():
return True
return False
# Refresh the list of wire excluded
def RefreshWireExclusion(self):
self.WireExcluded = []
for element in self.Elements:
if isinstance(element, Wire):
startblock = element.StartConnected.GetParentBlock()
endblock = element.EndConnected.GetParentBlock()
if startblock in self.Elements and endblock in self.Elements:
self.WireExcluded.append(element)
# Returns the RedrawRect
def GetRedrawRect(self, movex = 0, movey = 0):
rect = None
for element in self.Elements:
if rect is None:
rect = element.GetRedrawRect(movex, movey)
else:
rect = rect.Union(element.GetRedrawRect(movex, movey))
return rect
# Clean this group of elements
def Clean(self):
# Clean all the elements of the group
for element in self.Elements:
element.Clean()
# Delete this group of elements
def Delete(self):
# Delete all the elements of the group
for element in self.Elements:
element.Delete()
self.WireExcluded = []
# Returns if the point given is in the bounding box of one of the elements of this group
def HitTest(self, pt, connectors=True):
result = False
for element in self.Elements:
result |= element.HitTest(pt, connectors)
return result
# Returns if the element given is in this group
def IsElementIn(self, element):
return element in self.Elements
# Change the elements of the group
def SetElements(self, elements):
self.Elements = elements
self.RefreshWireExclusion()
self.RefreshBoundingBox()
# Returns the elements of the group
def GetElements(self):
return self.Elements
# Align the group elements
def AlignElements(self, horizontally, vertically):
minx = self.BoundingBox.x + self.BoundingBox.width
miny = self.BoundingBox.y + self.BoundingBox.height
maxx = self.BoundingBox.x
maxy = self.BoundingBox.y
for element in self.Elements:
if not isinstance(element, Wire):
posx, posy = element.GetPosition()
width, height = element.GetSize()
minx = min(minx, posx)
miny = min(miny, posy)
maxx = max(maxx, posx + width)
maxy = max(maxy, posy + height)
for element in self.Elements:
if not isinstance(element, Wire):
posx, posy = element.GetPosition()
width, height = element.GetSize()
movex = movey = 0
if horizontally == ALIGN_LEFT:
movex = minx - posx
elif horizontally == ALIGN_CENTER:
movex = (maxx + minx - width) / 2 - posx
elif horizontally == ALIGN_RIGHT:
movex = maxx - width - posx
if vertically == ALIGN_TOP:
movey = miny - posy
elif vertically == ALIGN_MIDDLE:
movey = (maxy + miny - height) / 2 - posy
elif vertically == ALIGN_BOTTOM:
movey = maxy - height - posy
if movex != 0 or movey != 0:
element.Move(movex, movey)
element.RefreshModel()
self.RefreshWireExclusion()
self.RefreshBoundingBox()
# Remove or select the given element if it is or not in the group
def SelectElement(self, element):
if element in self.Elements:
self.Elements.remove(element)
else:
self.Elements.append(element)
self.RefreshWireExclusion()
self.RefreshBoundingBox()
# Move this group of elements
def Move(self, movex, movey):
movex = max(-self.BoundingBox.x, movex)
movey = max(-self.BoundingBox.y, movey)
# Move all the elements of the group
for element in self.Elements:
if not isinstance(element, Wire):
element.Move(movex, movey, self.WireExcluded)
elif element in self.WireExcluded:
element.Move(movex, movey, True)
self.RefreshBoundingBox()
# Refreshes the bounding box of this group of elements
def RefreshBoundingBox(self):
if len(self.Elements) > 0:
bbox = self.Elements[0].GetBoundingBox()
minx, miny = bbox.x, bbox.y
maxx = bbox.x + bbox.width
maxy = bbox.y + bbox.height
for element in self.Elements[1:]:
bbox = element.GetBoundingBox()
minx = min(minx, bbox.x)
miny = min(miny, bbox.y)
maxx = max(maxx, bbox.x + bbox.width)
maxy = max(maxy, bbox.y + bbox.height)
self.BoundingBox = wx.Rect(minx, miny, maxx - minx, maxy - miny)
else:
self.BoundingBox = wx.Rect(0, 0, 0, 0)
self.Pos = wx.Point(self.BoundingBox.x, self.BoundingBox.y)
self.Size = wx.Size(self.BoundingBox.width, self.BoundingBox.height)
# Forbids to change the group position
def SetPosition(x, y):
pass
# Returns the position of this group
def GetPosition(self):
return self.BoundingBox.x, self.BoundingBox.y
# Forbids to change the group size
def SetSize(width, height):
pass
# Returns the size of this group
def GetSize(self):
return self.BoundingBox.width, self.BoundingBox.height
# Moves and Resizes the group elements for fitting scaling
def AdjustToScaling(self, scaling):
movex_max = movey_max = 0
for element in self.Elements:
movex, movey = element.AdjustToScaling(scaling)
movex_max = max(movex_max, abs(movex))
movey_max = max(movey_max, abs(movey))
return movex_max, movey_max
# Refreshes the group elements to move defined and handle selected
def ProcessDragging(self, movex, movey, event, scaling):
handle_type, handle = self.Handle
# If it is a move handle, Move this group elements
if handle_type == HANDLE_MOVE:
movex = max(-self.BoundingBox.x, movex)
movey = max(-self.BoundingBox.y, movey)
if scaling is not None:
movex = round_scaling(movex, scaling[0])
movey = round_scaling(movey, scaling[1])
if event.ControlDown():
self.CurrentDrag.x = self.CurrentDrag.x + movex
self.CurrentDrag.y = self.CurrentDrag.y + movey
if abs(self.CurrentDrag.x) > abs(self.CurrentDrag.y):
movex = self.StartPos.x + self.CurrentDrag.x - self.Pos.x
movey = self.StartPos.y - self.Pos.y
else:
movex = self.StartPos.x - self.Pos.x
movey = self.StartPos.y + self.CurrentDrag.y - self.Pos.y
self.Move(movex, movey)
return movex, movey
return 0, 0
# Change the variable that indicates if this element is highlighted
def SetHighlighted(self, highlighted):
for element in self.Elements:
element.SetHighlighted(highlighted)
def HighlightPoint(self, pos):
for element in self.Elements:
if isinstance(element, Wire):
element.HighlightPoint(pos)
# Method called when a LeftDown event have been generated
def OnLeftDown(self, event, dc, scaling):
Graphic_Element.OnLeftDown(self, event, dc, scaling)
for element in self.Elements:
element.Handle = self.Handle
# Change the variable that indicates if the elemente is selected
def SetSelected(self, selected):
for element in self.Elements:
element.SetSelected(selected)
# Method called when a RightUp event has been generated
def OnRightUp(self, event, dc, scaling):
# Popup the menu with special items for a group
self.Parent.PopupGroupMenu()
# Refreshes the model of all the elements of this group
def RefreshModel(self):
for element in self.Elements:
element.RefreshModel()
#-------------------------------------------------------------------------------
# Connector for all types of blocks
#-------------------------------------------------------------------------------
"""
Class that implements a connector for any type of block
"""
class Connector:
# Create a new connector
def __init__(self, parent, name, type, position, direction, negated = False, edge = "none", onlyone = False):
self.ParentBlock = parent
self.Name = name
self.Type = type
self.Pos = position
self.Direction = direction
self.Wires = []
if self.ParentBlock.IsOfType("BOOL", type):
self.Negated = negated
self.Edge = edge
else:
self.Negated = False
self.Edge = "none"
self.OneConnected = onlyone
self.Valid = True
self.Value = None
self.Forced = False
self.Selected = False
self.Highlights = []
self.RefreshNameSize()
def Flush(self):
self.ParentBlock = None
for wire, handle in self.Wires:
wire.Flush()
self.Wires = []
# Returns the RedrawRect
def GetRedrawRect(self, movex = 0, movey = 0):
parent_pos = self.ParentBlock.GetPosition()
x = min(parent_pos[0] + self.Pos.x, parent_pos[0] + self.Pos.x + self.Direction[0] * CONNECTOR_SIZE)
y = min(parent_pos[1] + self.Pos.y, parent_pos[1] + self.Pos.y + self.Direction[1] * CONNECTOR_SIZE)
if self.Direction[0] == 0:
width = 5
else:
width = CONNECTOR_SIZE
if self.Direction[1] == 0:
height = 5
else:
height = CONNECTOR_SIZE
return wx.Rect(x - abs(movex), y - abs(movey), width + 2 * abs(movex), height + 2 * abs(movey))
# Change the connector selection
def SetSelected(self, selected):
self.Selected = selected
# Make a clone of the connector
def Clone(self, parent = None):
if parent is None:
parent = self.ParentBlock
return Connector(parent, self.Name, self.Type, wx.Point(self.Pos[0], self.Pos[1]),
self.Direction, self.Negated)
# Returns the connector parent block
def GetParentBlock(self):
return self.ParentBlock
# Returns the connector type
def GetType(self, raw = False):
if self.ParentBlock.IsEndType(self.Type) or raw:
return self.Type
elif (self.Negated or self.Edge != "none") and self.ParentBlock.IsOfType("BOOL", self.Type):
return "BOOL"
else:
return self.ParentBlock.GetConnectionResultType(self, self.Type)
# Returns the connector type
def GetConnectedType(self):
if self.ParentBlock.IsEndType(self.Type):
return self.Type
elif len(self.Wires) == 1:
return self.Wires[0][0].GetOtherConnectedType(self.Wires[0][1])
return self.Type
# Returns the connector type
def GetConnectedRedrawRect(self, movex, movey):
rect = None
for wire, handle in self.Wires:
if rect is None:
rect = wire.GetRedrawRect()
else:
rect = rect.Union(wire.GetRedrawRect())
return rect
# Returns if connector type is compatible with type given
def IsCompatible(self, type):
reference = self.GetType()
return self.ParentBlock.IsOfType(type, reference) or self.ParentBlock.IsOfType(reference, type)
# Changes the connector name
def SetType(self, type):
self.Type = type
for wire, handle in self.Wires:
wire.SetValid(wire.IsConnectedCompatible())
# Returns the connector name
def GetName(self):
return self.Name
# Changes the connector name
def SetName(self, name):
self.Name = name
self.RefreshNameSize()
def RefreshForced(self):
self.Forced = False
for wire, handle in self.Wires:
self.Forced |= wire.IsForced()
def RefreshValue(self):
self.Value = self.ReceivingCurrent()
def RefreshValid(self):
self.Valid = True
for wire, handle in self.Wires:
self.Valid &= wire.GetValid()
def ReceivingCurrent(self):
current = False
for wire, handle in self.Wires:
value = wire.GetValue()
if current != "undefined" and isinstance(value, BooleanType):
current |= wire.GetValue()
elif value == "undefined":
current = "undefined"
return current
def SpreadCurrent(self, spreading):
for wire, handle in self.Wires:
wire.SetValue(spreading)
# Changes the connector name size
def RefreshNameSize(self):
if self.Name != "":
self.NameSize = self.ParentBlock.Parent.GetTextExtent(self.Name)
else:
self.NameSize = 0, 0
# Returns the connector name size
def GetNameSize(self):
return self.NameSize
# Returns the wires connected to the connector
def GetWires(self):
return self.Wires
# Returns the parent block Id
def GetBlockId(self):
return self.ParentBlock.GetId()
# Returns the connector relative position
def GetRelPosition(self):
return self.Pos
# Returns the connector absolute position
def GetPosition(self, size = True):
parent_pos = self.ParentBlock.GetPosition()
# If the position of the end of the connector is asked
if size:
x = parent_pos[0] + self.Pos.x + self.Direction[0] * CONNECTOR_SIZE
y = parent_pos[1] + self.Pos.y + self.Direction[1] * CONNECTOR_SIZE
else:
x = parent_pos[0] + self.Pos.x
y = parent_pos[1] + self.Pos.y
return wx.Point(x, y)
# Change the connector relative position
def SetPosition(self, pos):
self.Pos = pos
# Returns the connector direction
def GetDirection(self):
return self.Direction
# Change the connector direction
def SetDirection(self, direction):
self.Direction = direction
# Connect a wire to this connector at the last place
def Connect(self, wire, refresh = True):
self.InsertConnect(len(self.Wires), wire, refresh)
# Connect a wire to this connector at the place given
def InsertConnect(self, idx, wire, refresh = True):
if wire not in self.Wires:
self.Wires.insert(idx, wire)
if refresh:
self.ParentBlock.RefreshModel(False)
# Returns the index of the wire given in the list of connected
def GetWireIndex(self, wire):
for i, (tmp_wire, handle) in enumerate(self.Wires):
if tmp_wire == wire:
return i
return None
# Unconnect a wire or all wires connected to the connector
def UnConnect(self, wire = None, unconnect = True, delete = False):
i = 0
found = False
while i < len(self.Wires) and not found:
if not wire or self.Wires[i][0] == wire:
# If Unconnect haven't been called from a wire, disconnect the connector in the wire
if unconnect:
if self.Wires[i][1] == 0:
self.Wires[i][0].UnConnectStartPoint(delete)
else:
self.Wires[i][0].UnConnectEndPoint(delete)
# Remove wire from connected
if wire:
self.Wires.pop(i)
found = True
i += 1
# If no wire defined, unconnect all wires
if not wire:
self.Wires = []
self.RefreshValid()
self.ParentBlock.RefreshModel(False)
# Returns if connector has one or more wire connected
def IsConnected(self):
return len(self.Wires) > 0
# Move the wires connected
def MoveConnected(self, exclude = []):
if len(self.Wires) > 0:
# Calculate the new position of the end point
parent_pos = self.ParentBlock.GetPosition()
x = parent_pos[0] + self.Pos.x + self.Direction[0] * CONNECTOR_SIZE
y = parent_pos[1] + self.Pos.y + self.Direction[1] * CONNECTOR_SIZE
# Move the corresponding point on all the wires connected
for wire, index in self.Wires:
if wire not in exclude:
if index == 0:
wire.MoveStartPoint(wx.Point(x, y))
else:
wire.MoveEndPoint(wx.Point(x, y))
# Refreshes the model of all the wires connected
def RefreshWires(self):
for wire in self.Wires:
wire[0].RefreshModel()
# Refreshes the parent block model
def RefreshParentBlock(self):
self.ParentBlock.RefreshModel(False)
# Highlight the parent block
def HighlightParentBlock(self, highlight):
self.ParentBlock.SetHighlighted(highlight)
self.ParentBlock.Refresh()
# Returns all the blocks connected to this connector
def GetConnectedBlocks(self):
blocks = []
for wire, handle in self.Wires:
# Get other connector connected to each wire
if handle == 0:
connector = wire.GetEndConnected()
else:
connector = wire.GetStartConnected()
# Get parent block for this connector
if connector:
block = connector.GetParentBlock()
if block not in blocks:
blocks.append(block)
return blocks
# Returns the connector negated property
def IsNegated(self):
return self.Negated
# Changes the connector negated property
def SetNegated(self, negated):
if self.ParentBlock.IsOfType("BOOL", self.Type):
self.Negated = negated
self.Edge = "none"
# Returns the connector edge property
def GetEdge(self):
return self.Edge
# Changes the connector edge property
def SetEdge(self, edge):
if self.ParentBlock.IsOfType("BOOL", self.Type):
self.Edge = edge
self.Negated = False
# Tests if the point given is near from the end point of this connector
def TestPoint(self, pt, direction = None, exclude = True):
parent_pos = self.ParentBlock.GetPosition()
if (not (len(self.Wires) > 0 and self.OneConnected and exclude) or self.Type == "BOOL")\
and direction is None or self.Direction == direction:
# Calculate a square around the end point of this connector
x = parent_pos[0] + self.Pos.x + self.Direction[0] * CONNECTOR_SIZE - ANCHOR_DISTANCE
y = parent_pos[1] + self.Pos.y + self.Direction[1] * CONNECTOR_SIZE - ANCHOR_DISTANCE
width = ANCHOR_DISTANCE * 2 + abs(self.Direction[0]) * CONNECTOR_SIZE
height = ANCHOR_DISTANCE * 2 + abs(self.Direction[1]) * CONNECTOR_SIZE
rect = wx.Rect(x, y, width, height)
return rect.InsideXY(pt.x, pt.y)
return False
# Draws the highlightment of this element if it is highlighted
def DrawHighlightment(self, dc):
scalex, scaley = dc.GetUserScale()
dc.SetUserScale(1, 1)
pen = MiterPen(HIGHLIGHTCOLOR, 2 * scalex + 5)
pen.SetCap(wx.CAP_BUTT)
dc.SetPen(pen)
dc.SetBrush(wx.Brush(HIGHLIGHTCOLOR))
dc.SetLogicalFunction(wx.AND)
parent_pos = self.ParentBlock.GetPosition()
posx = parent_pos[0] + self.Pos.x
posy = parent_pos[1] + self.Pos.y
xstart = parent_pos[0] + self.Pos.x
ystart = parent_pos[1] + self.Pos.y
if self.Direction[0] < 0:
xstart += 1
if self.Direction[1] < 0:
ystart += 1
xend = xstart + CONNECTOR_SIZE * self.Direction[0]
yend = ystart + CONNECTOR_SIZE * self.Direction[1]
dc.DrawLine(round((xstart + self.Direction[0]) * scalex), round((ystart + self.Direction[1]) * scaley),
round(xend * scalex), round(yend * scaley))
dc.SetLogicalFunction(wx.COPY)
dc.SetUserScale(scalex, scaley)
# Adds an highlight to the connector
def AddHighlight(self, infos, start, end, highlight_type):
if highlight_type == ERROR_HIGHLIGHT:
for wire, handle in self.Wires:
wire.SetValid(False)
AddHighlight(self.Highlights, (start, end, highlight_type))
# Removes an highlight from the connector
def RemoveHighlight(self, infos, start, end, highlight_type):
error = False
highlights = []
for highlight in self.Highlights:
if highlight != (start, end, highlight_type):
highlights.append(highlight)
error |= highlight == ERROR_HIGHLIGHT
self.Highlights = highlights
if not error:
for wire, handle in self.Wires:
wire.SetValid(wire.IsConnectedCompatible())
# Removes all the highlights of one particular type from the connector
def ClearHighlight(self, highlight_type=None):
error = False
if highlight_type is None:
self.Highlights = []
else:
highlights = []
for highlight in self.Highlights:
if highlight[2] != highlight_type:
highlights.append(highlight)
error |= highlight == ERROR_HIGHLIGHT
self.Highlights = highlights
if not error:
for wire, handle in self.Wires:
wire.SetValid(wire.IsConnectedCompatible())
# Draws the connector
def Draw(self, dc):
if self.Selected:
dc.SetPen(MiterPen(wx.BLUE, 3))
dc.SetBrush(wx.WHITE_BRUSH)
#elif len(self.Highlights) > 0:
# dc.SetPen(MiterPen(self.Highlights[-1][1]))
# dc.SetBrush(wx.Brush(self.Highlights[-1][0]))
else:
if not self.Valid:
dc.SetPen(MiterPen(wx.RED))
elif isinstance(self.Value, BooleanType) and self.Value:
if self.Forced:
dc.SetPen(MiterPen(wx.CYAN))
else:
dc.SetPen(MiterPen(wx.GREEN))
elif self.Value == "undefined":
dc.SetPen(MiterPen(wx.NamedColour("orange")))
elif self.Forced:
dc.SetPen(MiterPen(wx.BLUE))
else:
dc.SetPen(MiterPen(wx.BLACK))
dc.SetBrush(wx.WHITE_BRUSH)
parent_pos = self.ParentBlock.GetPosition()
if getattr(dc, "printing", False):
name_size = dc.GetTextExtent(self.Name)
else:
name_size = self.NameSize
if self.Negated:
# If connector is negated, draw a circle
xcenter = parent_pos[0] + self.Pos.x + (CONNECTOR_SIZE * self.Direction[0]) / 2
ycenter = parent_pos[1] + self.Pos.y + (CONNECTOR_SIZE * self.Direction[1]) / 2
dc.DrawCircle(xcenter, ycenter, CONNECTOR_SIZE / 2)
else:
xstart = parent_pos[0] + self.Pos.x
ystart = parent_pos[1] + self.Pos.y
if self.Edge == "rising":
# If connector has a rising edge, draw a right arrow
dc.DrawLine(xstart, ystart, xstart - 4, ystart - 4)
dc.DrawLine(xstart, ystart, xstart - 4, ystart + 4)
elif self.Edge == "falling":
# If connector has a falling edge, draw a left arrow
dc.DrawLine(xstart, ystart, xstart + 4, ystart - 4)
dc.DrawLine(xstart, ystart, xstart + 4, ystart + 4)
if self.Direction[0] < 0:
xstart += 1
if self.Direction[1] < 0:
ystart += 1
if self.Selected:
xend = xstart + (CONNECTOR_SIZE - 2) * self.Direction[0]
yend = ystart + (CONNECTOR_SIZE - 2) * self.Direction[1]
dc.DrawLine(xstart + 2 * self.Direction[0], ystart + 2 * self.Direction[1], xend, yend)
else:
xend = xstart + CONNECTOR_SIZE * self.Direction[0]
yend = ystart + CONNECTOR_SIZE * self.Direction[1]
dc.DrawLine(xstart + self.Direction[0], ystart + self.Direction[1], xend, yend)
if self.Direction[0] != 0:
ytext = parent_pos[1] + self.Pos.y - name_size[1] / 2
if self.Direction[0] < 0:
xtext = parent_pos[0] + self.Pos.x + 5
else:
xtext = parent_pos[0] + self.Pos.x - (name_size[0] + 5)
if self.Direction[1] != 0:
xtext = parent_pos[0] + self.Pos.x - name_size[0] / 2
if self.Direction[1] < 0:
ytext = parent_pos[1] + self.Pos.y + 5
else:
ytext = parent_pos[1] + self.Pos.y - (name_size[1] + 5)
# Draw the text
dc.DrawText(self.Name, xtext, ytext)
if not getattr(dc, "printing", False):
DrawHighlightedText(dc, self.Name, self.Highlights, xtext, ytext)
#-------------------------------------------------------------------------------
# Common Wire Element
#-------------------------------------------------------------------------------
"""
Class that implements a wire for connecting two blocks
"""
class Wire(Graphic_Element, DebugDataConsumer):
# Create a new wire
def __init__(self, parent, start = None, end = None):
Graphic_Element.__init__(self, parent)
DebugDataConsumer.__init__(self)
self.StartPoint = start
self.EndPoint = end
self.StartConnected = None
self.EndConnected = None
# If the start and end points are defined, calculate the wire
if start and end:
self.ResetPoints()
self.GeneratePoints()
else:
self.Points = []
self.Segments = []
self.SelectedSegment = None
self.Valid = True
self.ValueSize = None
self.ComputedValue = None
self.OverStart = False
self.OverEnd = False
self.ComputingType = False
self.Font = parent.GetMiniFont()
def GetDefinition(self):
if self.StartConnected is not None and self.EndConnected is not None:
startblock = self.StartConnected.GetParentBlock()
endblock = self.EndConnected.GetParentBlock()
return [], [(startblock.GetId(), endblock.GetId())]
return [], []
def Flush(self):
self.StartConnected = None
self.EndConnected = None
def GetToolTipValue(self):
if self.Value is not None and self.Value != "undefined" and not isinstance(self.Value, BooleanType):
if isinstance(self.Value, StringType) and self.Value.find("#") == -1:
return "\"%s\""%self.Value
else:
return str(self.Value)
return None
# Returns the RedrawRect
def GetRedrawRect(self, movex = 0, movey = 0):
rect = Graphic_Element.GetRedrawRect(self, movex, movey)
if self.StartConnected:
rect = rect.Union(self.StartConnected.GetRedrawRect(movex, movey))
if self.EndConnected:
rect = rect.Union(self.EndConnected.GetRedrawRect(movex, movey))
if self.ValueSize is None and isinstance(self.ComputedValue, (StringType, UnicodeType)):
self.ValueSize = self.Parent.GetMiniTextExtent(self.ComputedValue)
if self.ValueSize is not None:
width, height = self.ValueSize
if self.BoundingBox[2] > width * 4 or self.BoundingBox[3] > height * 4:
x = self.Points[0].x + width * self.StartPoint[1][0] / 2
y = self.Points[0].y + height * (self.StartPoint[1][1] - 1)
rect = rect.Union(wx.Rect(x, y, width, height))
x = self.Points[-1].x + width * self.EndPoint[1][0] / 2
y = self.Points[-1].y + height * (self.EndPoint[1][1] - 1)
rect = rect.Union(wx.Rect(x, y, width, height))
else:
middle = len(self.Segments) / 2 + len(self.Segments) % 2 - 1
x = (self.Points[middle].x + self.Points[middle + 1].x - width) / 2
if self.BoundingBox[3] > height and self.Segments[middle] in [NORTH, SOUTH]:
y = (self.Points[middle].y + self.Points[middle + 1].y - height) / 2
else:
y = self.Points[middle].y - height
rect = rect.Union(wx.Rect(x, y, width, height))
return rect
def Clone(self, parent, connectors = {}, dx = 0, dy = 0):
start_connector = connectors.get(self.StartConnected, None)
end_connector = connectors.get(self.EndConnected, None)
if start_connector is not None and end_connector is not None:
wire = Wire(parent)
wire.SetPoints([(point.x + dx, point.y + dy) for point in self.Points])
start_connector.Connect((wire, 0), False)
end_connector.Connect((wire, -1), False)
wire.ConnectStartPoint(start_connector.GetPosition(), start_connector)
wire.ConnectEndPoint(end_connector.GetPosition(), end_connector)
return wire
return None
# Forbids to change the wire position
def SetPosition(x, y):
pass
# Forbids to change the wire size
def SetSize(width, height):
pass
# Moves and Resizes the element for fitting scaling
def AdjustToScaling(self, scaling):
if scaling is not None:
movex_max = movey_max = 0
for idx, point in enumerate(self.Points):
if 0 < idx < len(self.Points) - 1:
movex = round_scaling(point.x, scaling[0]) - point.x
movey = round_scaling(point.y, scaling[1]) - point.y
if idx == 1:
if self.Segments[0][0] == 0:
movex = 0
elif (point.x + movex - self.Points[0].x) * self.Segments[0][0] < MIN_SEGMENT_SIZE:
movex = round_scaling(self.Points[0].x + MIN_SEGMENT_SIZE * self.Segments[0][0], scaling[0], self.Segments[0][0]) - point.x
if self.Segments[0][1] == 0:
movey = 0
elif (point.y + movey - self.Points[0].y) * self.Segments[0][1] < MIN_SEGMENT_SIZE:
movey = round_scaling(self.Points[0].y + MIN_SEGMENT_SIZE * self.Segments[0][1], scaling[0], self.Segments[0][1]) - point.y
elif idx == len(self.Points) - 2:
if self.Segments[-1][0] == 0:
movex = 0
elif (self.Points[-1].x - (point.x + movex)) * self.Segments[-1][0] < MIN_SEGMENT_SIZE:
movex = round_scaling(self.Points[-1].x + MIN_SEGMENT_SIZE * self.Segments[0][0], scaling[0], self.Segments[0][0]) - point.x
if self.Segments[-1][1] == 0:
movey = 0
elif (self.Points[-1].y - (point.y + movey)) * self.Segments[-1][1] < MIN_SEGMENT_SIZE:
movey = round_scaling(self.Points[-1].y - MIN_SEGMENT_SIZE * self.Segments[-1][1], scaling[1], -self.Segments[-1][1]) - point.y
movex_max = max(movex_max, movex)
movey_max = max(movey_max, movey)
point.x += movex
point.y += movey
return movex_max, movey_max
return 0, 0
# Returns connector to which start point is connected
def GetStartConnected(self):
return self.StartConnected
# Returns connector to which start point is connected
def GetStartConnectedType(self):
if self.StartConnected and not self.ComputingType:
self.ComputingType = True
computed_type = self.StartConnected.GetType()
self.ComputingType = False
return computed_type
return None
# Returns connector to which end point is connected
def GetEndConnected(self):
return self.EndConnected
# Returns connector to which end point is connected
def GetEndConnectedType(self):
if self.EndConnected and not self.ComputingType:
self.ComputingType = True
computed_type = self.EndConnected.GetType()
self.ComputingType = False
return computed_type
return None
def GetConnectionDirection(self):
if self.StartConnected is None and self.EndConnected is None:
return None
elif self.StartConnected is not None and self.EndConnected is None:
return (-self.StartPoint[1][0], -self.StartPoint[1][1])
elif self.StartConnected is None and self.EndConnected is not None:
return self.EndPoint
elif self.Handle is not None:
handle_type, handle = self.Handle
# A point has been handled
if handle_type == HANDLE_POINT:
if handle == 0:
return self.EndPoint
else:
return (-self.StartPoint[1][0], -self.StartPoint[1][1])
return None
def GetOtherConnected(self, connector):
if self.StartConnected == connector:
return self.EndConnected
else:
return self.StartConnected
def GetOtherConnectedType(self, handle):
if handle == 0:
return self.GetEndConnectedType()
else:
return self.GetStartConnectedType()
def IsConnectedCompatible(self):
if self.StartConnected:
return self.StartConnected.IsCompatible(self.GetEndConnectedType())
elif self.EndConnected:
return True
return False
def SetForced(self, forced):
if self.Forced != forced:
self.Forced = forced
if self.StartConnected:
self.StartConnected.RefreshForced()
if self.EndConnected:
self.EndConnected.RefreshForced()
if self.Visible:
self.Parent.ElementNeedRefresh(self)
def SetValue(self, value):
if self.Value != value:
self.Value = value
if value is not None and not isinstance(value, BooleanType):
if isinstance(value, StringType) and value.find('#') == -1:
self.ComputedValue = "\"%s\""%value
else:
self.ComputedValue = str(value)
if self.ToolTip is not None:
self.ToolTip.SetTip(self.ComputedValue)
if len(self.ComputedValue) > 4:
self.ComputedValue = self.ComputedValue[:4] + "..."
self.ValueSize = None
if self.StartConnected:
self.StartConnected.RefreshValue()
if self.EndConnected:
self.EndConnected.RefreshValue()
if self.Visible:
self.Parent.ElementNeedRefresh(self)
if isinstance(value, BooleanType) and self.StartConnected is not None:
block = self.StartConnected.GetParentBlock()
block.SpreadCurrent()
# Unconnect the start and end points
def Clean(self):
if self.StartConnected:
self.UnConnectStartPoint()
if self.EndConnected:
self.UnConnectEndPoint()
# Delete this wire by calling the corresponding method
def Delete(self):
self.Parent.DeleteWire(self)
# Select a segment and not the whole wire. It's useful for Ladder Diagram
def SetSelectedSegment(self, segment):
# The last segment is indicated
if segment == -1:
segment = len(self.Segments) - 1
# The selected segment is reinitialised
if segment == None:
if self.StartConnected:
self.StartConnected.SetSelected(False)
if self.EndConnected:
self.EndConnected.SetSelected(False)
# The segment selected is the first
elif segment == 0:
if self.StartConnected:
self.StartConnected.SetSelected(True)
if self.EndConnected:
# There is only one segment
if len(self.Segments) == 1:
self.EndConnected.SetSelected(True)
else:
self.EndConnected.SetSelected(False)
# The segment selected is the last
elif segment == len(self.Segments) - 1:
if self.StartConnected:
self.StartConnected.SetSelected(False)
if self.EndConnected:
self.EndConnected.SetSelected(True)
self.SelectedSegment = segment
self.Refresh()
def SetValid(self, valid):
self.Valid = valid
if self.StartConnected:
self.StartConnected.RefreshValid()
if self.EndConnected:
self.EndConnected.RefreshValid()
def GetValid(self):
return self.Valid
# Reinitialize the wire points
def ResetPoints(self):
if self.StartPoint and self.EndPoint:
self.Points = [self.StartPoint[0], self.EndPoint[0]]
self.Segments = [self.StartPoint[1]]
else:
self.Points = []
self.Segments = []
# Refresh the wire bounding box
def RefreshBoundingBox(self):
if len(self.Points) > 0:
# If startpoint or endpoint is connected, save the point radius
start_radius = end_radius = 0
if not self.StartConnected:
start_radius = POINT_RADIUS
if not self.EndConnected:
end_radius = POINT_RADIUS
# Initialize minimum and maximum from the first point
minx, minbbxx = self.Points[0].x, self.Points[0].x - start_radius
maxx, maxbbxx = self.Points[0].x, self.Points[0].x + start_radius
miny, minbbxy = self.Points[0].y, self.Points[0].y - start_radius
maxy, maxbbxy = self.Points[0].y, self.Points[0].y + start_radius
# Actualize minimum and maximum with the other points
for point in self.Points[1:-1]:
minx, minbbxx = min(minx, point.x), min(minbbxx, point.x)
maxx, maxbbxx = max(maxx, point.x), max(maxbbxx, point.x)
miny, minbbxy = min(miny, point.y), min(minbbxy, point.y)
maxy, maxbbxy = max(maxy, point.y), max(maxbbxy, point.y)
if len(self.Points) > 1:
minx, minbbxx = min(minx, self.Points[-1].x), min(minbbxx, self.Points[-1].x - end_radius)
maxx, maxbbxx = max(maxx, self.Points[-1].x), max(maxbbxx, self.Points[-1].x + end_radius)
miny, minbbxy = min(miny, self.Points[-1].y), min(minbbxy, self.Points[-1].y - end_radius)
maxy, maxbbxy = max(maxy, self.Points[-1].y), max(maxbbxy, self.Points[-1].y + end_radius)
self.Pos.x, self.Pos.y = minx, miny
self.Size = wx.Size(maxx - minx, maxy - miny)
self.BoundingBox = wx.Rect(minbbxx, minbbxy, maxbbxx - minbbxx + 1, maxbbxy - minbbxy + 1)
# Refresh the realpoints that permits to keep the proportionality in wire during resizing
def RefreshRealPoints(self):
if len(self.Points) > 0:
self.RealPoints = []
# Calculate float relative position of each point with the minimum point
for point in self.Points:
self.RealPoints.append([float(point.x - self.Pos.x), float(point.y - self.Pos.y)])
# Returns the wire minimum size
def GetMinSize(self):
width = 1
height = 1
dir_product = product(self.StartPoint[1], self.EndPoint[1])
# The directions are opposed
if dir_product < 0:
if self.StartPoint[0] != 0:
width = MIN_SEGMENT_SIZE * 2
if self.StartPoint[1] != 0:
height = MIN_SEGMENT_SIZE * 2
# The directions are the same
elif dir_product > 0:
if self.StartPoint[0] != 0:
width = MIN_SEGMENT_SIZE
if self.StartPoint[1] != 0:
height = MIN_SEGMENT_SIZE
# The directions are perpendiculars
else:
width = MIN_SEGMENT_SIZE
height = MIN_SEGMENT_SIZE
return width + 1, height + 1
# Returns if the point given is on one of the wire segments
def HitTest(self, pt, connectors=True):
test = False
for i in xrange(len(self.Points) - 1):
rect = wx.Rect(0, 0, 0, 0)
if i == 0 and self.StartConnected is not None:
x1 = self.Points[i].x - self.Segments[0][0] * CONNECTOR_SIZE
y1 = self.Points[i].y - self.Segments[0][1] * CONNECTOR_SIZE
else:
x1, y1 = self.Points[i].x, self.Points[i].y
if i == len(self.Points) - 2 and self.EndConnected is not None:
x2 = self.Points[i + 1].x + self.Segments[-1][0] * CONNECTOR_SIZE
y2 = self.Points[i + 1].y + self.Segments[-1][1] * CONNECTOR_SIZE
else:
x2, y2 = self.Points[i + 1].x, self.Points[i + 1].y
# Calculate a rectangle around the segment
rect = wx.Rect(min(x1, x2) - ANCHOR_DISTANCE, min(y1, y2) - ANCHOR_DISTANCE,
abs(x1 - x2) + 2 * ANCHOR_DISTANCE, abs(y1 - y2) + 2 * ANCHOR_DISTANCE)
test |= rect.InsideXY(pt.x, pt.y)
return test
# Returns the wire start or end point if the point given is on one of them
def TestPoint(self, pt):
# Test the wire start point
rect = wx.Rect(self.Points[0].x - ANCHOR_DISTANCE, self.Points[0].y - ANCHOR_DISTANCE,
2 * ANCHOR_DISTANCE, 2 * ANCHOR_DISTANCE)
if rect.InsideXY(pt.x, pt.y):
return 0
# Test the wire end point
if len(self.Points) > 1:
rect = wx.Rect(self.Points[-1].x - ANCHOR_DISTANCE, self.Points[-1].y - ANCHOR_DISTANCE,
2 * ANCHOR_DISTANCE, 2 * ANCHOR_DISTANCE)
if rect.InsideXY(pt.x, pt.y):
return -1
return None
# Returns the wire segment if the point given is on it
def TestSegment(self, pt, all=False):
for i in xrange(len(self.Segments)):
# If wire is not in a Ladder Diagram, first and last segments are excluded
if all or 0 < i < len(self.Segments) - 1:
x1, y1 = self.Points[i].x, self.Points[i].y
x2, y2 = self.Points[i + 1].x, self.Points[i + 1].y
# Calculate a rectangle around the segment
rect = wx.Rect(min(x1, x2) - ANCHOR_DISTANCE, min(y1, y2) - ANCHOR_DISTANCE,
abs(x1 - x2) + 2 * ANCHOR_DISTANCE, abs(y1 - y2) + 2 * ANCHOR_DISTANCE)
if rect.InsideXY(pt.x, pt.y):
return i, self.Segments[i]
return None
# Define the wire points
def SetPoints(self, points, verify=True):
if len(points) > 1:
self.Points = [wx.Point(x, y) for x, y in points]
# Calculate the start and end directions
self.StartPoint = [None, vector(self.Points[0], self.Points[1])]
self.EndPoint = [None, vector(self.Points[-1], self.Points[-2])]
# Calculate the start and end points
self.StartPoint[0] = wx.Point(self.Points[0].x + CONNECTOR_SIZE * self.StartPoint[1][0],
self.Points[0].y + CONNECTOR_SIZE * self.StartPoint[1][1])
self.EndPoint[0] = wx.Point(self.Points[-1].x + CONNECTOR_SIZE * self.EndPoint[1][0],
self.Points[-1].y + CONNECTOR_SIZE * self.EndPoint[1][1])
self.Points[0] = self.StartPoint[0]
self.Points[-1] = self.EndPoint[0]
# Calculate the segments directions
self.Segments = []
i = 0
while i < len(self.Points) - 1:
if verify and 0 < i < len(self.Points) - 2 and \
self.Points[i] == self.Points[i + 1] and \
self.Segments[-1] == vector(self.Points[i + 1], self.Points[i + 2]):
for j in xrange(2):
self.Points.pop(i)
else:
segment = vector(self.Points[i], self.Points[i + 1])
if is_null_vector(segment) and i > 0:
segment = (self.Segments[-1][1], self.Segments[-1][0])
if i < len(self.Points) - 2:
next = vector(self.Points[i + 1], self.Points[i + 2])
if next == segment or is_null_vector(add_vectors(segment, next)):
self.Points.insert(i + 1, wx.Point(self.Points[i + 1].x, self.Points[i + 1].y))
self.Segments.append(segment)
i += 1
self.RefreshBoundingBox()
self.RefreshRealPoints()
# Returns the position of the point indicated
def GetPoint(self, index):
if index < len(self.Points):
return self.Points[index].x, self.Points[index].y
return None
# Returns a list of the position of all wire points
def GetPoints(self, invert = False):
points = self.VerifyPoints()
points[0] = wx.Point(points[0].x - CONNECTOR_SIZE * self.StartPoint[1][0],
points[0].y - CONNECTOR_SIZE * self.StartPoint[1][1])
points[-1] = wx.Point(points[-1].x - CONNECTOR_SIZE * self.EndPoint[1][0],
points[-1].y - CONNECTOR_SIZE * self.EndPoint[1][1])
# An inversion of the list is asked
if invert:
points.reverse()
return points
# Returns the position of the two selected segment points
def GetSelectedSegmentPoints(self):
if self.SelectedSegment != None and len(self.Points) > 1:
return self.Points[self.SelectedSegment:self.SelectedSegment + 2]
return []
# Returns if the selected segment is the first and/or the last of the wire
def GetSelectedSegmentConnections(self):
if self.SelectedSegment != None and len(self.Points) > 1:
return self.SelectedSegment == 0, self.SelectedSegment == len(self.Segments) - 1
return (True, True)
# Returns the connectors on which the wire is connected
def GetConnected(self):
connected = []
if self.StartConnected and self.StartPoint[1] == WEST:
connected.append(self.StartConnected)
if self.EndConnected and self.EndPoint[1] == WEST:
connected.append(self.EndConnected)
return connected
# Returns the id of the block connected to the first or the last wire point
def GetConnectedInfos(self, index):
if index == 0 and self.StartConnected:
return self.StartConnected.GetBlockId(), self.StartConnected.GetName()
elif index == -1 and self.EndConnected:
return self.EndConnected.GetBlockId(), self.EndConnected.GetName()
return None
# Update the wire points position by keeping at most possible the current positions
def GeneratePoints(self, realpoints = True):
i = 0
# Calculate the start enad end points with the minimum segment size in the right direction
end = wx.Point(self.EndPoint[0].x + self.EndPoint[1][0] * MIN_SEGMENT_SIZE,
self.EndPoint[0].y + self.EndPoint[1][1] * MIN_SEGMENT_SIZE)
start = wx.Point(self.StartPoint[0].x + self.StartPoint[1][0] * MIN_SEGMENT_SIZE,
self.StartPoint[0].y + self.StartPoint[1][1] * MIN_SEGMENT_SIZE)
# Evaluate the point till it's the last
while i < len(self.Points) - 1:
# The next point is the last
if i + 1 == len(self.Points) - 1:
# Calculate the direction from current point to end point
v_end = vector(self.Points[i], end)
# The current point is the first
if i == 0:
# If the end point is not in the start direction, a point is added
if v_end != self.Segments[0] or v_end == self.EndPoint[1]:
self.Points.insert(1, wx.Point(start.x, start.y))
self.Segments.insert(1, DirectionChoice((self.Segments[0][1],
self.Segments[0][0]), v_end, self.EndPoint[1]))
# The current point is the second
elif i == 1:
# The previous direction and the target direction are mainly opposed, a point is added
if product(v_end, self.Segments[0]) < 0:
self.Points.insert(2, wx.Point(self.Points[1].x, self.Points[1].y))
self.Segments.insert(2, DirectionChoice((self.Segments[1][1],
self.Segments[1][0]), v_end, self.EndPoint[1]))
# The previous direction and the end direction are the same or they are
# perpendiculars and the end direction points towards current segment
elif product(self.Segments[0], self.EndPoint[1]) >= 0 and product(self.Segments[1], self.EndPoint[1]) <= 0:
# Current point and end point are aligned
if self.Segments[0][0] != 0:
self.Points[1].x = end.x
if self.Segments[0][1] != 0:
self.Points[1].y = end.y
# If the previous direction and the end direction are the same, a point is added
if product(self.Segments[0], self.EndPoint[1]) > 0:
self.Points.insert(2, wx.Point(self.Points[1].x, self.Points[1].y))
self.Segments.insert(2, DirectionChoice((self.Segments[1][1],
self.Segments[1][0]), v_end, self.EndPoint[1]))
else:
# Current point is positioned in the middle of start point
# and end point on the current direction and a point is added
if self.Segments[0][0] != 0:
self.Points[1].x = (end.x + start.x) / 2
if self.Segments[0][1] != 0:
self.Points[1].y = (end.y + start.y) / 2
self.Points.insert(2, wx.Point(self.Points[1].x, self.Points[1].y))
self.Segments.insert(2, DirectionChoice((self.Segments[1][1],
self.Segments[1][0]), v_end, self.EndPoint[1]))
else:
# The previous direction and the end direction are perpendiculars
if product(self.Segments[i - 1], self.EndPoint[1]) == 0:
# The target direction and the end direction aren't mainly the same
if product(v_end, self.EndPoint[1]) <= 0:
# Current point and end point are aligned
if self.Segments[i - 1][0] != 0:
self.Points[i].x = end.x
if self.Segments[i - 1][1] != 0:
self.Points[i].y = end.y
# Previous direction is updated from the new point
if product(vector(self.Points[i - 1], self.Points[i]), self.Segments[i - 1]) < 0:
self.Segments[i - 1] = (-self.Segments[i - 1][0], -self.Segments[i - 1][1])
else:
test = True
# If the current point is the third, test if the second
# point can be aligned with the end point
if i == 2:
test_point = wx.Point(self.Points[1].x, self.Points[1].y)
if self.Segments[1][0] != 0:
test_point.y = end.y
if self.Segments[1][1] != 0:
test_point.x = end.x
vector_test = vector(self.Points[0], test_point, False)
test = norm(vector_test) > MIN_SEGMENT_SIZE and product(self.Segments[0], vector_test) > 0
# The previous point can be aligned
if test:
self.Points[i].x, self.Points[i].y = end.x, end.y
if self.Segments[i - 1][0] != 0:
self.Points[i - 1].y = end.y
if self.Segments[i - 1][1] != 0:
self.Points[i - 1].x = end.x
self.Segments[i] = (-self.EndPoint[1][0], -self.EndPoint[1][1])
else:
# Current point is positioned in the middle of previous point
# and end point on the current direction and a point is added
if self.Segments[1][0] != 0:
self.Points[2].x = (self.Points[1].x + end.x) / 2
if self.Segments[1][1] != 0:
self.Points[2].y = (self.Points[1].y + end.y) / 2
self.Points.insert(3, wx.Point(self.Points[2].x, self.Points[2].y))
self.Segments.insert(3, DirectionChoice((self.Segments[2][1],
self.Segments[2][0]), v_end, self.EndPoint[1]))
else:
# Current point is aligned with end point
if self.Segments[i - 1][0] != 0:
self.Points[i].x = end.x
if self.Segments[i - 1][1] != 0:
self.Points[i].y = end.y
# Previous direction is updated from the new point
if product(vector(self.Points[i - 1], self.Points[i]), self.Segments[i - 1]) < 0:
self.Segments[i - 1] = (-self.Segments[i - 1][0], -self.Segments[i - 1][1])
# If previous direction and end direction are opposed
if product(self.Segments[i - 1], self.EndPoint[1]) < 0:
# Current point is positioned in the middle of previous point
# and end point on the current direction
if self.Segments[i - 1][0] != 0:
self.Points[i].x = (end.x + self.Points[i - 1].x) / 2
if self.Segments[i - 1][1] != 0:
self.Points[i].y = (end.y + self.Points[i - 1].y) / 2
# A point is added
self.Points.insert(i + 1, wx.Point(self.Points[i].x, self.Points[i].y))
self.Segments.insert(i + 1, DirectionChoice((self.Segments[i][1],
self.Segments[i][0]), v_end, self.EndPoint[1]))
else:
# Current point is the first, and second is not mainly in the first direction
if i == 0 and product(vector(start, self.Points[1]), self.Segments[0]) < 0:
# If first and second directions aren't perpendiculars, a point is added
if product(self.Segments[0], self.Segments[1]) != 0:
self.Points.insert(1, wx.Point(start.x, start.y))
self.Segments.insert(1, DirectionChoice((self.Segments[0][1],
self.Segments[0][0]), vector(start, self.Points[1]), self.Segments[1]))
else:
self.Points[1].x, self.Points[1].y = start.x, start.y
else:
# Next point is aligned with current point
if self.Segments[i][0] != 0:
self.Points[i + 1].y = self.Points[i].y
if self.Segments[i][1] != 0:
self.Points[i + 1].x = self.Points[i].x
# Current direction is updated from the new point
if product(vector(self.Points[i], self.Points[i + 1]), self.Segments[i]) < 0:
self.Segments[i] = (-self.Segments[i][0], -self.Segments[i][1])
i += 1
self.RefreshBoundingBox()
if realpoints:
self.RefreshRealPoints()
# Verify that two consecutive points haven't the same position
def VerifyPoints(self):
points = [point for point in self.Points]
segments = [segment for segment in self.Segments]
i = 1
while i < len(points) - 1:
if points[i] == points[i + 1] and segments[i - 1] == segments[i + 1]:
for j in xrange(2):
points.pop(i)
segments.pop(i)
else:
i += 1
# If the wire isn't in a Ladder Diagram, save the new point list
if self.Parent.__class__.__name__ != "LD_Viewer":
self.Points = [point for point in points]
self.Segments = [segment for segment in segments]
self.RefreshBoundingBox()
self.RefreshRealPoints()
return points
# Moves all the wire points except the first and the last if they are connected
def Move(self, dx, dy, endpoints = False):
for i, point in enumerate(self.Points):
if endpoints or not (i == 0 and self.StartConnected) and not (i == len(self.Points) - 1 and self.EndConnected):
point.x += dx
point.y += dy
self.StartPoint[0] = self.Points[0]
self.EndPoint[0] = self.Points[-1]
self.GeneratePoints()
# Resize the wire from position and size given
def Resize(self, x, y, width, height):
if len(self.Points) > 1:
# Calculate the new position of each point for testing the new size
minx, miny = self.Pos.x, self.Pos.y
lastwidth, lastheight = self.Size.width, self.Size.height
for i, point in enumerate(self.RealPoints):
# If start or end point is connected, it's not calculate
if not (i == 0 and self.StartConnected) and not (i == len(self.Points) - 1 and self.EndConnected):
if i == 0:
dir = self.StartPoint[1]
elif i == len(self.Points) - 1:
dir = self.EndPoint[1]
else:
dir = (0, 0)
pointx = max(-dir[0] * MIN_SEGMENT_SIZE, min(int(round(point[0] * width / float(max(lastwidth, 1)))),
width - dir[0] * MIN_SEGMENT_SIZE))
pointy = max(-dir[1] * MIN_SEGMENT_SIZE, min(int(round(point[1] * height / float(max(lastheight, 1)))),
height - dir[1] * MIN_SEGMENT_SIZE))
self.Points[i] = wx.Point(minx + x + pointx, miny + y + pointy)
self.StartPoint[0] = self.Points[0]
self.EndPoint[0] = self.Points[-1]
self.GeneratePoints(False)
# Test if the wire position or size have changed
if x != 0 and minx == self.Pos.x:
x = 0
width = lastwidth
if y != 0 and miny == self.Pos.y:
y = 0
height = lastwidth
if width != lastwidth and lastwidth == self.Size.width:
width = lastwidth
if height != lastheight and lastheight == self.Size.height:
height = lastheight
# Calculate the real points from the new size, it's important for
# keeping a proportionality in the points position with the size
# during a resize dragging
for i, point in enumerate(self.RealPoints):
if not (i == 0 and self.StartConnected) and not (i == len(self.Points) - 1 and self.EndConnected):
point[0] = point[0] * width / float(max(lastwidth, 1))
point[1] = point[1] * height / float(max(lastheight, 1))
# Calculate the correct position of the points from real points
for i, point in enumerate(self.RealPoints):
if not (i == 0 and self.StartConnected) and not (i == len(self.Points) - 1 and self.EndConnected):
if i == 0:
dir = self.StartPoint[1]
elif i == len(self.Points) - 1:
dir = self.EndPoint[1]
else:
dir = (0, 0)
realpointx = max(-dir[0] * MIN_SEGMENT_SIZE, min(int(round(point[0])),
width - dir[0] * MIN_SEGMENT_SIZE))
realpointy = max(-dir[1] * MIN_SEGMENT_SIZE, min(int(round(point[1])),
height - dir[1] * MIN_SEGMENT_SIZE))
self.Points[i] = wx.Point(minx + x + realpointx, miny + y + realpointy)
self.StartPoint[0] = self.Points[0]
self.EndPoint[0] = self.Points[-1]
self.GeneratePoints(False)
# Moves the wire start point and update the wire points
def MoveStartPoint(self, point):
if len(self.Points) > 1:
self.StartPoint[0] = point
self.Points[0] = point
self.GeneratePoints()
# Changes the wire start direction and update the wire points
def SetStartPointDirection(self, dir):
if len(self.Points) > 1:
self.StartPoint[1] = dir
self.Segments[0] = dir
self.GeneratePoints()
# Rotates the wire start direction by an angle of 90 degrees anticlockwise
def RotateStartPoint(self):
self.SetStartPointDirection((self.StartPoint[1][1], -self.StartPoint[1][0]))
# Connects wire start point to the connector given and moves wire start point
# to given point
def ConnectStartPoint(self, point, connector):
if point:
self.MoveStartPoint(point)
self.StartConnected = connector
self.RefreshBoundingBox()
# Unconnects wire start point
def UnConnectStartPoint(self, delete = False):
if delete:
self.StartConnected = None
self.Delete()
elif self.StartConnected:
self.StartConnected.UnConnect(self, unconnect = False)
self.StartConnected = None
self.RefreshBoundingBox()
# Moves the wire end point and update the wire points
def MoveEndPoint(self, point):
if len(self.Points) > 1:
self.EndPoint[0] = point
self.Points[-1] = point
self.GeneratePoints()
# Changes the wire end direction and update the wire points
def SetEndPointDirection(self, dir):
if len(self.Points) > 1:
self.EndPoint[1] = dir
self.GeneratePoints()
# Rotates the wire end direction by an angle of 90 degrees anticlockwise
def RotateEndPoint(self):
self.SetEndPointDirection((self.EndPoint[1][1], -self.EndPoint[1][0]))
# Connects wire end point to the connector given and moves wire end point
# to given point
def ConnectEndPoint(self, point, connector):
if point:
self.MoveEndPoint(point)
self.EndConnected = connector
self.RefreshBoundingBox()
# Unconnects wire end point
def UnConnectEndPoint(self, delete = False):
if delete:
self.EndConnected = None
self.Delete()
elif self.EndConnected:
self.EndConnected.UnConnect(self, unconnect = False)
self.EndConnected = None
self.RefreshBoundingBox()
# Moves the wire segment given by its index
def MoveSegment(self, idx, movex, movey, scaling):
if 0 < idx < len(self.Segments) - 1:
if self.Segments[idx] in (NORTH, SOUTH):
start_x = self.Points[idx].x
if scaling is not None:
movex = round_scaling(self.Points[idx].x + movex, scaling[0]) - self.Points[idx].x
if idx == 1 and (self.Points[1].x + movex - self.Points[0].x) * self.Segments[0][0] < MIN_SEGMENT_SIZE:
movex = round_scaling(self.Points[0].x + MIN_SEGMENT_SIZE * self.Segments[0][0], scaling[0], self.Segments[0][0]) - self.Points[idx].x
elif idx == len(self.Segments) - 2 and (self.Points[-1].x - (self.Points[-2].x + movex)) * self.Segments[-1][0] < MIN_SEGMENT_SIZE:
movex = round_scaling(self.Points[-1].x - MIN_SEGMENT_SIZE * self.Segments[-1][0], scaling[0], -self.Segments[-1][0]) - self.Points[idx].x
self.Points[idx].x += movex
self.Points[idx + 1].x += movex
self.GeneratePoints()
if start_x != self.Points[idx].x:
return self.Points[idx].x - start_x, 0
elif self.Segments[idx] in (EAST, WEST):
start_y = self.Points[idx].y
if scaling is not None:
movey = round_scaling(self.Points[idx].y + movey, scaling[1]) - self.Points[idx].y
if idx == 1 and (self.Points[1].y + movey - self.Points[0].y) * self.Segments[0][1] < MIN_SEGMENT_SIZE:
movex = round_scaling(self.Points[0].y + MIN_SEGMENT_SIZE * self.Segments[0][1], scaling[0], self.Segments[0][1]) - self.Points[idx].y
elif idx == len(self.Segments) - 2 and (self.Points[-1].y - (self.Points[-2].y + movey)) * self.Segments[-1][1] < MIN_SEGMENT_SIZE:
movey = round_scaling(self.Points[idx].y - MIN_SEGMENT_SIZE * self.Segments[-1][1], scaling[1], -self.Segments[-1][1]) - self.Points[idx].y
self.Points[idx].y += movey
self.Points[idx + 1].y += movey
self.GeneratePoints()
if start_y != self.Points[idx].y:
return 0, self.Points[idx].y - start_y
return 0, 0
# Adds two points in the middle of the handled segment
def AddSegment(self):
handle_type, handle = self.Handle
if handle_type == HANDLE_SEGMENT:
segment, dir = handle
if len(self.Segments) > 1:
pointx = self.Points[segment].x
pointy = self.Points[segment].y
if dir[0] != 0:
pointx = (self.Points[segment].x + self.Points[segment + 1].x) / 2
if dir[1] != 0:
pointy = (self.Points[segment].y + self.Points[segment + 1].y) / 2
self.Points.insert(segment + 1, wx.Point(pointx, pointy))
self.Segments.insert(segment + 1, (dir[1], dir[0]))
self.Points.insert(segment + 2, wx.Point(pointx, pointy))
self.Segments.insert(segment + 2, dir)
else:
p1x = p2x = self.Points[segment].x
p1y = p2y = self.Points[segment].y
if dir[0] != 0:
p1x = (2 * self.Points[segment].x + self.Points[segment + 1].x) / 3
p2x = (self.Points[segment].x + 2 * self.Points[segment + 1].x) / 3
if dir[1] != 0:
p1y = (2 * self.Points[segment].y + self.Points[segment + 1].y) / 3
p2y = (self.Points[segment].y + 2 * self.Points[segment + 1].y) / 3
self.Points.insert(segment + 1, wx.Point(p1x, p1y))
self.Segments.insert(segment + 1, (dir[1], dir[0]))
self.Points.insert(segment + 2, wx.Point(p1x, p1y))
self.Segments.insert(segment + 2, dir)
self.Points.insert(segment + 3, wx.Point(p2x, p2y))
self.Segments.insert(segment + 3, (dir[1], dir[0]))
self.Points.insert(segment + 4, wx.Point(p2x, p2y))
self.Segments.insert(segment + 4, dir)
self.GeneratePoints()
# Delete the handled segment by removing the two segment points
def DeleteSegment(self):
handle_type, handle = self.Handle
if handle_type == HANDLE_SEGMENT:
segment, dir = handle
for i in xrange(2):
self.Points.pop(segment)
self.Segments.pop(segment)
self.GeneratePoints()
self.RefreshModel()
# Method called when a LeftDown event have been generated
def OnLeftDown(self, event, dc, scaling):
pos = GetScaledEventPosition(event, dc, scaling)
# Test if a point have been handled
#result = self.TestPoint(pos)
#if result != None:
# self.Handle = (HANDLE_POINT, result)
# wx.CallAfter(self.Parent.SetCurrentCursor, 1)
#else:
# Test if a segment have been handled
result = self.TestSegment(pos)
if result != None:
if result[1] in (NORTH, SOUTH):
wx.CallAfter(self.Parent.SetCurrentCursor, 4)
elif result[1] in (EAST, WEST):
wx.CallAfter(self.Parent.SetCurrentCursor, 5)
self.Handle = (HANDLE_SEGMENT, result)
# Execute the default method for a graphic element
else:
Graphic_Element.OnLeftDown(self, event, dc, scaling)
self.oldPos = pos
# Method called when a RightUp event has been generated
def OnRightUp(self, event, dc, scaling):
pos = GetScaledEventPosition(event, dc, scaling)
# Test if a segment has been handled
result = self.TestSegment(pos, True)
if result != None:
self.Handle = (HANDLE_SEGMENT, result)
# Popup the menu with special items for a wire
self.Parent.PopupWireMenu(0 < result[0] < len(self.Segments) - 1)
else:
# Execute the default method for a graphic element
Graphic_Element.OnRightUp(self, event, dc, scaling)
# Method called when a LeftDClick event has been generated
def OnLeftDClick(self, event, dc, scaling):
rect = self.GetRedrawRect()
if event.ControlDown():
direction = (self.StartPoint[1], self.EndPoint[1])
if direction in [(EAST, WEST), (WEST, EAST)]:
avgy = (self.StartPoint[0].y + self.EndPoint[0].y) / 2
if scaling is not None:
avgy = round(float(avgy) / scaling[1]) * scaling[1]
if self.StartConnected is not None:
movey = avgy - self.StartPoint[0].y
startblock = self.StartConnected.GetParentBlock()
startblock.Move(0, movey)
startblock.RefreshModel()
rect.Union(startblock.GetRedrawRect(0, movey))
else:
self.MoveStartPoint(wx.Point(self.StartPoint[0].x, avgy))
if self.EndConnected is not None:
movey = avgy - self.EndPoint[0].y
endblock = self.EndConnected.GetParentBlock()
endblock.Move(0, movey)
endblock.RefreshModel()
rect.Union(endblock.GetRedrawRect(0, movey))
else:
self.MoveEndPoint(wx.Point(self.EndPoint[0].x, avgy))
self.Parent.RefreshBuffer()
elif direction in [(NORTH, SOUTH), (SOUTH, NORTH)]:
avgx = (self.StartPoint[0].x + self.EndPoint[0].x) / 2
if scaling is not None:
avgx = round(float(avgx) / scaling[0]) * scaling[0]
if self.StartConnected is not None:
movex = avgx - self.StartPoint[0].x
startblock = self.StartConnected.GetParentBlock()
startblock.Move(movex, 0)
startblock.RefreshModel()
rect.Union(startblock.GetRedrawRect(movex, 0))
else:
self.MoveStartPoint(wx.Point(avgx, self.StartPoint[0].y))
if self.EndConnected is not None:
movex = avgx - self.EndPoint[0].x
endblock = self.EndConnected.GetParentBlock()
endblock.Move(movex, 0)
endblock.RefreshModel()
rect.Union(endblock.GetRedrawRect(movex, 0))
else:
self.MoveEndPoint(wx.Point(avgx, self.EndPoint[0].y))
self.Parent.RefreshBuffer()
else:
self.ResetPoints()
self.GeneratePoints()
self.RefreshModel()
self.Parent.RefreshBuffer()
rect.Union(self.GetRedrawRect())
self.Parent.RefreshRect(self.Parent.GetScrolledRect(rect), False)
# Method called when a Motion event has been generated
def OnMotion(self, event, dc, scaling):
pos = GetScaledEventPosition(event, dc, scaling)
if not event.Dragging():
# Test if a segment has been handled
result = self.TestSegment(pos)
if result:
if result[1] in (NORTH, SOUTH):
wx.CallAfter(self.Parent.SetCurrentCursor, 4)
elif result[1] in (EAST, WEST):
wx.CallAfter(self.Parent.SetCurrentCursor, 5)
return 0, 0
else:
# Execute the default method for a graphic element
return Graphic_Element.OnMotion(self, event, dc, scaling)
else:
# Execute the default method for a graphic element
return Graphic_Element.OnMotion(self, event, dc, scaling)
# Refreshes the wire state according to move defined and handle selected
def ProcessDragging(self, movex, movey, event, scaling):
handle_type, handle = self.Handle
# A point has been handled
if handle_type == HANDLE_POINT:
movex = max(-self.Points[handle].x + POINT_RADIUS, movex)
movey = max(-self.Points[handle].y + POINT_RADIUS, movey)
if scaling is not None:
movex = round_scaling(self.Points[handle].x + movex, scaling[0]) - self.Points[handle].x
movey = round_scaling(self.Points[handle].y + movey, scaling[1]) - self.Points[handle].y
# Try to connect point to a connector
new_pos = wx.Point(self.Points[handle].x + movex, self.Points[handle].y + movey)
connector = self.Parent.FindBlockConnector(new_pos, self.GetConnectionDirection())
if connector:
if handle == 0 and self.EndConnected != connector:
connector.HighlightParentBlock(True)
connector.Connect((self, handle))
self.SetStartPointDirection(connector.GetDirection())
self.ConnectStartPoint(connector.GetPosition(), connector)
pos = connector.GetPosition()
movex = pos.x - self.oldPos.x
movey = pos.y - self.oldPos.y
if not connector.IsCompatible(self.GetEndConnectedType()):
self.SetValid(False)
self.Dragging = False
elif handle != 0 and self.StartConnected != connector:
connector.HighlightParentBlock(True)
connector.Connect((self, handle))
self.SetEndPointDirection(connector.GetDirection())
self.ConnectEndPoint(connector.GetPosition(), connector)
pos = connector.GetPosition()
movex = pos.x - self.oldPos.x
movey = pos.y - self.oldPos.y
if not connector.IsCompatible(self.GetStartConnectedType()):
self.SetValid(False)
self.Dragging = False
elif handle == 0:
self.MoveStartPoint(new_pos)
else:
self.MoveEndPoint(new_pos)
# If there is no connector, move the point
elif handle == 0:
self.SetValid(True)
if self.StartConnected:
self.StartConnected.HighlightParentBlock(False)
self.UnConnectStartPoint()
self.MoveStartPoint(new_pos)
else:
self.SetValid(True)
if self.EndConnected:
self.EndConnected.HighlightParentBlock(False)
self.UnConnectEndPoint()
self.MoveEndPoint(new_pos)
return movex, movey
# A segment has been handled, move a segment
elif handle_type == HANDLE_SEGMENT:
return self.MoveSegment(handle[0], movex, movey, scaling)
# Execute the default method for a graphic element
else:
return Graphic_Element.ProcessDragging(self, movex, movey, event, scaling)
# Refreshes the wire model
def RefreshModel(self, move=True):
if self.StartConnected and self.StartPoint[1] in [WEST, NORTH]:
self.StartConnected.RefreshParentBlock()
if self.EndConnected and self.EndPoint[1] in [WEST, NORTH]:
self.EndConnected.RefreshParentBlock()
# Change the variable that indicates if this element is highlighted
def SetHighlighted(self, highlighted):
self.Highlighted = highlighted
if not highlighted:
self.OverStart = False
self.OverEnd = False
self.Refresh()
def HighlightPoint(self, pos):
refresh = False
start, end = self.OverStart, self.OverEnd
self.OverStart = False
self.OverEnd = False
# Test if a point has been handled
result = self.TestPoint(pos)
if result != None:
if result == 0 and self.StartConnected is not None:
self.OverStart = True
elif result != 0 and self.EndConnected is not None:
self.OverEnd = True
if start != self.OverStart or end != self.OverEnd:
self.Refresh()
# Draws the highlightment of this element if it is highlighted
def DrawHighlightment(self, dc):
scalex, scaley = dc.GetUserScale()
dc.SetUserScale(1, 1)
dc.SetPen(MiterPen(HIGHLIGHTCOLOR, (2 * scalex + 5)))
dc.SetBrush(wx.Brush(HIGHLIGHTCOLOR))
dc.SetLogicalFunction(wx.AND)
# Draw the start and end points if they are not connected or the mouse is over them
if len(self.Points) > 0 and (not self.StartConnected or self.OverStart):
dc.DrawCircle(round(self.Points[0].x * scalex),
round(self.Points[0].y * scaley),
(POINT_RADIUS + 1) * scalex + 2)
if len(self.Points) > 1 and (not self.EndConnected or self.OverEnd):
dc.DrawCircle(self.Points[-1].x * scalex, self.Points[-1].y * scaley, (POINT_RADIUS + 1) * scalex + 2)
# Draw the wire lines and the last point (it seems that DrawLines stop before the last point)
if len(self.Points) > 1:
points = [wx.Point(round((self.Points[0].x - self.Segments[0][0]) * scalex),
round((self.Points[0].y - self.Segments[0][1]) * scaley))]
points.extend([wx.Point(round(point.x * scalex), round(point.y * scaley)) for point in self.Points[1:-1]])
points.append(wx.Point(round((self.Points[-1].x + self.Segments[-1][0]) * scalex),
round((self.Points[-1].y + self.Segments[-1][1]) * scaley)))
else:
points = []
dc.DrawLines(points)
dc.SetLogicalFunction(wx.COPY)
dc.SetUserScale(scalex, scaley)
if self.StartConnected is not None:
self.StartConnected.DrawHighlightment(dc)
self.StartConnected.Draw(dc)
if self.EndConnected is not None:
self.EndConnected.DrawHighlightment(dc)
self.EndConnected.Draw(dc)
# Draws the wire lines and points
def Draw(self, dc):
Graphic_Element.Draw(self, dc)
if not self.Valid:
dc.SetPen(MiterPen(wx.RED))
dc.SetBrush(wx.RED_BRUSH)
elif isinstance(self.Value, BooleanType) and self.Value:
if self.Forced:
dc.SetPen(MiterPen(wx.CYAN))
dc.SetBrush(wx.CYAN_BRUSH)
else:
dc.SetPen(MiterPen(wx.GREEN))
dc.SetBrush(wx.GREEN_BRUSH)
elif self.Value == "undefined":
dc.SetPen(MiterPen(wx.NamedColour("orange")))
dc.SetBrush(wx.Brush(wx.NamedColour("orange")))
elif self.Forced:
dc.SetPen(MiterPen(wx.BLUE))
dc.SetBrush(wx.BLUE_BRUSH)
else:
dc.SetPen(MiterPen(wx.BLACK))
dc.SetBrush(wx.BLACK_BRUSH)
# Draw the start and end points if they are not connected or the mouse is over them
if len(self.Points) > 0 and (not self.StartConnected or self.OverStart):
dc.DrawCircle(self.Points[0].x, self.Points[0].y, POINT_RADIUS)
if len(self.Points) > 1 and (not self.EndConnected or self.OverEnd):
dc.DrawCircle(self.Points[-1].x, self.Points[-1].y, POINT_RADIUS)
# Draw the wire lines and the last point (it seems that DrawLines stop before the last point)
if len(self.Points) > 1:
points = [wx.Point(self.Points[0].x - self.Segments[0][0], self.Points[0].y - self.Segments[0][1])]
points.extend([point for point in self.Points[1:-1]])
points.append(wx.Point(self.Points[-1].x + self.Segments[-1][0], self.Points[-1].y + self.Segments[-1][1]))
else:
points = []
dc.DrawLines(points)
# Draw the segment selected in red
if not getattr(dc, "printing", False) and self.SelectedSegment is not None:
dc.SetPen(MiterPen(wx.BLUE, 3))
if self.SelectedSegment == len(self.Segments) - 1:
end = 0
else:
end = 1
dc.DrawLine(self.Points[self.SelectedSegment].x - 1, self.Points[self.SelectedSegment].y,
self.Points[self.SelectedSegment + 1].x + end, self.Points[self.SelectedSegment + 1].y)
if self.Value is not None and not isinstance(self.Value, BooleanType) and self.Value != "undefined":
dc.SetFont(self.Parent.GetMiniFont())
dc.SetTextForeground(wx.NamedColour("purple"))
if self.ValueSize is None and isinstance(self.ComputedValue, (StringType, UnicodeType)):
self.ValueSize = self.Parent.GetMiniTextExtent(self.ComputedValue)
if self.ValueSize is not None:
width, height = self.ValueSize
if self.BoundingBox[2] > width * 4 or self.BoundingBox[3] > height * 4:
x = self.Points[0].x + width * (self.StartPoint[1][0] - 1) / 2
y = self.Points[0].y + height * (self.StartPoint[1][1] - 1)
dc.DrawText(self.ComputedValue, x, y)
x = self.Points[-1].x + width * (self.EndPoint[1][0] - 1) / 2
y = self.Points[-1].y + height * (self.EndPoint[1][1] - 1)
dc.DrawText(self.ComputedValue, x, y)
else:
middle = len(self.Segments) / 2 + len(self.Segments) % 2 - 1
x = (self.Points[middle].x + self.Points[middle + 1].x - width) / 2
if self.BoundingBox[3] > height and self.Segments[middle] in [NORTH, SOUTH]:
y = (self.Points[middle].y + self.Points[middle + 1].y - height) / 2
else:
y = self.Points[middle].y - height
dc.DrawText(self.ComputedValue, x, y)
dc.SetFont(self.Parent.GetFont())
dc.SetTextForeground(wx.BLACK)
#-------------------------------------------------------------------------------
# Graphic comment element
#-------------------------------------------------------------------------------
def FilterHighlightsByRow(highlights, row, length):
_highlights = []
for start, end, highlight_type in highlights:
if start[0] <= row and end[0] >= row:
if start[0] < row:
start = (row, 0)
if end[0] > row:
end = (row, length)
_highlights.append((start, end, highlight_type))
return _highlights
def FilterHighlightsByColumn(highlights, start_col, end_col):
_highlights = []
for start, end, highlight_type in highlights:
if end[1] > start_col and start[1] < end_col:
start = (start[0], max(start[1], start_col) - start_col)
end = (end[0], min(end[1], end_col) - start_col)
_highlights.append((start, end, highlight_type))
return _highlights
"""
Class that implements a comment
"""
class Comment(Graphic_Element):
# Create a new comment
def __init__(self, parent, content, id = None):
Graphic_Element.__init__(self, parent)
self.Id = id
self.Content = content
self.Pos = wx.Point(0, 0)
self.Size = wx.Size(0, 0)
self.Highlights = []
# Make a clone of this comment
def Clone(self, parent, id = None, pos = None):
comment = Comment(parent, self.Content, id)
if pos is not None:
comment.SetPosition(pos.x, pos.y)
comment.SetSize(self.Size[0], self.Size[1])
return comment
# Method for keeping compatibility with others
def Clean(self):
pass
# Delete this comment by calling the corresponding method
def Delete(self):
self.Parent.DeleteComment(self)
# Refresh the comment bounding box
def RefreshBoundingBox(self):
self.BoundingBox = wx.Rect(self.Pos.x, self.Pos.y, self.Size[0] + 1, self.Size[1] + 1)
# Changes the comment size
def SetSize(self, width, height):
self.Size.SetWidth(width)
self.Size.SetHeight(height)
self.RefreshBoundingBox()
# Returns the comment size
def GetSize(self):
return self.Size.GetWidth(), self.Size.GetHeight()
# Returns the comment minimum size
def GetMinSize(self):
dc = wx.ClientDC(self.Parent)
min_width = 0
min_height = 0
# The comment minimum size is the maximum size of words in the content
for line in self.Content.splitlines():
for word in line.split(" "):
wordwidth, wordheight = dc.GetTextExtent(word)
min_width = max(min_width, wordwidth)
min_height = max(min_height, wordheight)
return min_width + 20, min_height + 20
# Changes the comment position
def SetPosition(self, x, y):
self.Pos.x = x
self.Pos.y = y
self.RefreshBoundingBox()
# Changes the comment content
def SetContent(self, content):
self.Content = content
min_width, min_height = self.GetMinSize()
self.Size[0] = max(self.Size[0], min_width)
self.Size[1] = max(self.Size[1], min_height)
self.RefreshBoundingBox()
# Returns the comment content
def GetContent(self):
return self.Content
# Returns the comment position
def GetPosition(self):
return self.Pos.x, self.Pos.y
# Moves the comment
def Move(self, dx, dy, connected = True):
self.Pos.x += dx
self.Pos.y += dy
self.RefreshBoundingBox()
# Resizes the comment with the position and the size given
def Resize(self, x, y, width, height):
self.Move(x, y)
self.SetSize(width, height)
# Method called when a RightUp event have been generated
def OnRightUp(self, event, dc, scaling):
# Popup the default menu
self.Parent.PopupDefaultMenu()
# Refreshes the wire state according to move defined and handle selected
def ProcessDragging(self, movex, movey, event, scaling):
if self.Parent.GetDrawingMode() != FREEDRAWING_MODE and self.Parent.CurrentLanguage == "LD":
movex = movey = 0
return Graphic_Element.ProcessDragging(self, movex, movey, event, scaling)
# Refreshes the comment model
def RefreshModel(self, move=True):
self.Parent.RefreshCommentModel(self)
# Method called when a LeftDClick event have been generated
def OnLeftDClick(self, event, dc, scaling):
# Edit the comment content
self.Parent.EditCommentContent(self)
# Adds an highlight to the comment
def AddHighlight(self, infos, start, end, highlight_type):
if infos[0] == "content":
AddHighlight(self.Highlights, (start, end, highlight_type))
# Removes an highlight from the comment
def RemoveHighlight(self, infos, start, end, highlight_type):
RemoveHighlight(self.Highlights, (start, end, highlight_type))
# Removes all the highlights of one particular type from the comment
def ClearHighlight(self, highlight_type=None):
self.Highlights = ClearHighlights(self.Highlights, highlight_type)
# Draws the highlightment of this element if it is highlighted
def DrawHighlightment(self, dc):
scalex, scaley = dc.GetUserScale()
dc.SetUserScale(1, 1)
dc.SetPen(MiterPen(HIGHLIGHTCOLOR))
dc.SetBrush(wx.Brush(HIGHLIGHTCOLOR))
dc.SetLogicalFunction(wx.AND)
left = (self.Pos.x - 1) * scalex - 2
right = (self.Pos.x + self.Size[0] + 1) * scalex + 2
top = (self.Pos.y - 1) * scaley - 2
bottom = (self.Pos.y + self.Size[1] + 1) * scaley + 2
angle_top = (self.Pos.x + self.Size[0] - 9) * scalex + 2
angle_right = (self.Pos.y + 9) * scaley - 2
polygon = [wx.Point(left, top), wx.Point(angle_top, top),
wx.Point(right, angle_right), wx.Point(right, bottom),
wx.Point(left, bottom)]
dc.DrawPolygon(polygon)
dc.SetLogicalFunction(wx.COPY)
dc.SetUserScale(scalex, scaley)
# Draws the comment and its content
def Draw(self, dc):
Graphic_Element.Draw(self, dc)
dc.SetPen(MiterPen(wx.BLACK))
dc.SetBrush(wx.WHITE_BRUSH)
# Draws the comment shape
polygon = [wx.Point(self.Pos.x, self.Pos.y),
wx.Point(self.Pos.x + self.Size[0] - 10, self.Pos.y),
wx.Point(self.Pos.x + self.Size[0], self.Pos.y + 10),
wx.Point(self.Pos.x + self.Size[0], self.Pos.y + self.Size[1]),
wx.Point(self.Pos.x, self.Pos.y + self.Size[1])]
dc.DrawPolygon(polygon)
lines = [wx.Point(self.Pos.x + self.Size[0] - 10, self.Pos.y),
wx.Point(self.Pos.x + self.Size[0] - 10, self.Pos.y + 10),
wx.Point(self.Pos.x + self.Size[0], self.Pos.y + 10)]
dc.DrawLines(lines)
# Draws the comment content
y = self.Pos.y + 10
for idx, line in enumerate(self.Content.splitlines()):
first = True
linetext = ""
words = line.split(" ")
if not getattr(dc, "printing", False):
highlights = FilterHighlightsByRow(self.Highlights, idx, len(line))
highlights_offset = 0
for i, word in enumerate(words):
if first:
text = word
else:
text = linetext + " " + word
wordwidth, wordheight = dc.GetTextExtent(text)
if y + wordheight > self.Pos.y + self.Size[1] - 10:
break
if wordwidth < self.Size[0] - 20:
if i < len(words) - 1:
linetext = text
first = False
else:
dc.DrawText(text, self.Pos.x + 10, y)
if not getattr(dc, "printing", False):
DrawHighlightedText(dc, text, FilterHighlightsByColumn(highlights, highlights_offset, highlights_offset + len(text)), self.Pos.x + 10, y)
highlights_offset += len(text) + 1
y += wordheight + 5
else:
if not first:
dc.DrawText(linetext, self.Pos.x + 10, y)
if not getattr(dc, "printing", False):
DrawHighlightedText(dc, linetext, FilterHighlightsByColumn(highlights, highlights_offset, highlights_offset + len(linetext)), self.Pos.x + 10, y)
highlights_offset += len(linetext) + 1
if first or i == len(words) - 1:
if not first:
y += wordheight + 5
if y + wordheight > self.Pos.y + self.Size[1] - 10:
break
dc.DrawText(word, self.Pos.x + 10, y)
if not getattr(dc, "printing", False):
DrawHighlightedText(dc, word, FilterHighlightsByColumn(highlights, highlights_offset, highlights_offset + len(word)), self.Pos.x + 10, y)
highlights_offset += len(word) + 1
else:
linetext = word
y += wordheight + 5
if y + wordheight > self.Pos.y + self.Size[1] - 10:
break