--- a/include/EtherCAT_si.h Thu Feb 23 09:58:50 2006 +0000
+++ b/include/EtherCAT_si.h Thu Feb 23 13:38:54 2006 +0000
@@ -8,64 +8,76 @@
*
*****************************************************************************/
-#define EC_PROC_DATA(SLAVE) ((unsigned char *) ((SLAVE)->process_data))
-
/*****************************************************************************/
-#define EC_READ_EL10XX(SLAVE, CHANNEL) \
- ((EC_PROC_DATA(SLAVE)[0] >> (CHANNEL)) & 0x01)
+// Bitwise read/write macros
-/*****************************************************************************/
+#define EC_READ_BIT(PD, CH) (*((uint8_t *) (PD)) >> (CH)) & 0x01)
-#define EC_WRITE_EL200X(SLAVE, CHANNEL, VALUE) \
+#define EC_WRITE_BIT(PD, CH, VAL) \
do { \
- if (VALUE) EC_PROC_DATA(SLAVE)[0] |= (1 << (CHANNEL)); \
- else EC_PROC_DATA(SLAVE)[0] &= ~(1 << (CHANNEL)); \
+ if (VAL) *((uint8_t *) (PD)) |= (1 << (CH)); \
+ else *((uint8_t *) (PD)) &= ~(1 << (CH)); \
} while (0)
/*****************************************************************************/
-#define EC_READ_EL310X(SLAVE, CHANNEL) \
- ((signed short int) ((EC_PROC_DATA(SLAVE)[(CHANNEL) * 3 + 2] << 8) | \
- EC_PROC_DATA(SLAVE)[(CHANNEL) * 3 + 1]))
+// Read macros
-#define EC_READ_EL316X(SLAVE, CHANNEL) \
- ((unsigned short int) ((EC_PROC_DATA(SLAVE)[(CHANNEL) * 3 + 2] << 8) | \
- EC_PROC_DATA(SLAVE)[(CHANNEL) * 3 + 1]))
+#define EC_READ_U8(PD) \
+ (*((uint8_t *) (PD)))
+
+#define EC_READ_S8(PD) \
+ ((int8_t) *((uint8_t *) (PD)))
+
+#define EC_READ_U16(PD) \
+ ((uint16_t) (*((uint8_t *) (PD) + 0) << 0 | \
+ *((uint8_t *) (PD) + 1) << 8))
+
+#define EC_READ_S16(PD) \
+ ((int16_t) (*((uint8_t *) (PD) + 0) << 0 | \
+ *((uint8_t *) (PD) + 1) << 8))
+
+#define EC_READ_U32(PD) \
+ ((uint32_t) (*((uint8_t *) (PD) + 0) << 0 | \
+ *((uint8_t *) (PD) + 1) << 8 | \
+ *((uint8_t *) (PD) + 2) << 16 | \
+ *((uint8_t *) (PD) + 3) << 24))
+
+#define EC_READ_S32(PD) \
+ ((int32_t) (*((uint8_t *) (PD) + 0) << 0 | \
+ *((uint8_t *) (PD) + 1) << 8 | \
+ *((uint8_t *) (PD) + 2) << 16 | \
+ *((uint8_t *) (PD) + 3) << 24))
/*****************************************************************************/
-#define EC_WRITE_EL410X(SLAVE, CHANNEL, VALUE) \
+// Write macros
+
+#define EC_WRITE_U8(PD, VAL) \
do { \
- EC_PROC_DATA(SLAVE)[(CHANNEL) * 3 + 1] = ((VALUE) & 0xFF00) >> 8; \
- EC_PROC_DATA(SLAVE)[(CHANNEL) * 3 + 2] = (VALUE) & 0xFF; \
+ *((uint8_t *)(PD)) = ((uint8_t) (VAL)); \
} while (0)
-/*****************************************************************************/
+#define EC_WRITE_S8(PD, VAL) EC_WRITE_U8(PD, VAL)
-#define EC_CONF_EL5001_BAUD (0x4067)
+#define EC_WRITE_U16(PD, VAL) \
+ do { \
+ *((uint8_t *) (PD) + 0) = ((uint16_t) (VAL) >> 0) & 0xFF; \
+ *((uint8_t *) (PD) + 1) = ((uint16_t) (VAL) >> 8) & 0xFF; \
+ } while (0)
-#define EC_READ_EL5001_STATE(SLAVE) \
- ((unsigned char) EC_PROC_DATA(SLAVE)[0])
+#define EC_WRITE_S16(PD, VAL) EC_WRITE_U16(PD, VAL)
-#define EC_READ_EL5001_VALUE(SLAVE) \
- ((unsigned int) (EC_PROC_DATA(SLAVE)[1] | \
- (EC_PROC_DATA(SLAVE)[2] << 8) | \
- (EC_PROC_DATA(SLAVE)[3] << 16) | \
- (EC_PROC_DATA(SLAVE)[4] << 24)))
+#define EC_WRITE_U32(PD, VAL) \
+ do { \
+ *((uint8_t *) (PD) + 0) = ((uint32_t) (VAL) >> 0) & 0xFF; \
+ *((uint8_t *) (PD) + 1) = ((uint32_t) (VAL) >> 8) & 0xFF; \
+ *((uint8_t *) (PD) + 2) = ((uint32_t) (VAL) >> 16) & 0xFF; \
+ *((uint8_t *) (PD) + 3) = ((uint32_t) (VAL) >> 24) & 0xFF; \
+ } while (0)
-/*****************************************************************************/
-
-#define EC_READ_EL5101_STATE(SLAVE) \
- ((unsigned char) EC_PROC_DATA(SLAVE)[0])
-
-#define EC_READ_EL5101_VALUE(SLAVE) \
- ((unsigned int) (EC_PROC_DATA(SLAVE)[1] | \
- (EC_PROC_DATA(SLAVE)[2] << 8)))
-
-#define EC_READ_EL5101_LATCH(SLAVE) \
- ((unsigned int) (EC_PROC_DATA(SLAVE)[3] | \
- (EC_PROC_DATA(SLAVE)[4] << 8)))
+#define EC_WRITE_S32(PD, VAL) EC_WRITE_U32(PD, VAL)
/*****************************************************************************/
--- a/master/master.c Thu Feb 23 09:58:50 2006 +0000
+++ b/master/master.c Thu Feb 23 13:38:54 2006 +0000
@@ -71,14 +71,7 @@
{
unsigned int i;
- if (master->slaves) {
- for (i = 0; i < master->slave_count; i++) {
- ec_slave_clear(master->slaves + i);
- }
- kfree(master->slaves);
- master->slaves = NULL;
- }
- master->slave_count = 0;
+ ec_master_clear_slaves(master);
for (i = 0; i < master->domain_count; i++) {
ec_domain_clear(master->domains[i]);
@@ -96,6 +89,26 @@
/*****************************************************************************/
/**
+ Entfernt alle Slaves.
+*/
+
+void ec_master_clear_slaves(ec_master_t *master /**< EtherCAT-Master */)
+{
+ unsigned int i;
+
+ if (master->slaves) {
+ for (i = 0; i < master->slave_count; i++) {
+ ec_slave_clear(master->slaves + i);
+ }
+ kfree(master->slaves);
+ master->slaves = NULL;
+ }
+ master->slave_count = 0;
+}
+
+/*****************************************************************************/
+
+/**
Öffnet das EtherCAT-Geraet des Masters.
\return 0, wenn alles o.k., < 0, wenn kein Gerät registriert wurde oder
@@ -152,10 +165,9 @@
unsigned int i;
unsigned char data[2];
- if (master->slaves || master->slave_count) {
- printk(KERN_ERR "EtherCAT: Slave scan already done!\n");
- return -1;
- }
+ if (master->slaves || master->slave_count)
+ printk(KERN_WARNING "EtherCAT: Slave scan already done!\n");
+ ec_master_clear_slaves(master);
// Determine number of slaves on bus
@@ -434,6 +446,8 @@
return domain;
}
+/*****************************************************************************/
+
/**
Konfiguriert alle Slaves und setzt den Operational-Zustand.
@@ -486,6 +500,9 @@
type = slave->type;
+ // Check and reset CRC fault counters
+ ec_slave_check_crc(slave);
+
// Resetting FMMU's
if (slave->base_fmmu_count) {
memset(data, 0x00, EC_FMMU_SIZE * slave->base_fmmu_count);
@@ -581,6 +598,9 @@
{
slave = master->slaves + i;
+ // CRC-Zählerstände ausgeben
+ ec_slave_check_crc(slave);
+
if (unlikely(ec_slave_state_change(slave, EC_SLAVE_STATE_INIT) != 0))
return -1;
}
--- a/master/master.h Thu Feb 23 09:58:50 2006 +0000
+++ b/master/master.h Thu Feb 23 13:38:54 2006 +0000
@@ -47,6 +47,7 @@
void ec_master_init(ec_master_t *);
void ec_master_clear(ec_master_t *);
void ec_master_reset(ec_master_t *);
+void ec_master_clear_slaves(ec_master_t *);
// Registration of devices
int ec_master_open(ec_master_t *);
--- a/master/slave.c Thu Feb 23 09:58:50 2006 +0000
+++ b/master/slave.c Thu Feb 23 13:38:54 2006 +0000
@@ -432,6 +432,61 @@
/*****************************************************************************/
+/**
+ Gibt die Zählerstände der CRC-Fault-Counter aus und setzt diese zurück.
+
+ \return 0 bei Erfolg, sonst < 0
+*/
+
+int ec_slave_check_crc(ec_slave_t *slave /**< EtherCAT-Slave */)
+{
+ ec_frame_t frame;
+ uint8_t data[4];
+ uint16_t crc[2];
+
+ ec_frame_init_nprd(&frame, slave->master, slave->station_address, 0x0300,
+ 4);
+
+ if (unlikely(ec_frame_send_receive(&frame))) {
+ printk(KERN_WARNING "EtherCAT: Reading CRC fault counters failed"
+ " on slave %i - Could not send command!\n",
+ slave->ring_position);
+ return -1;
+ }
+
+ if (unlikely(frame.working_counter != 1)) {
+ printk(KERN_WARNING "EtherCAT: Reading CRC fault counters -"
+ " Slave %i did not respond!\n", slave->ring_position);
+ return -1;
+ }
+
+ crc[0] = frame.data[0] | (frame.data[1] << 8);
+ crc[1] = frame.data[2] | (frame.data[3] << 8);
+
+ // No CRC faults.
+ if (!crc[0] && !crc[1]) return 0;
+
+ printk(KERN_INFO "EtherCAT: CRC faults on slave %i. A: %i, B: %i\n",
+ slave->ring_position, crc[0], crc[1]);
+
+ // Reset CRC counters
+ memset(data, 0x00, 4);
+ ec_frame_init_npwr(&frame, slave->master, slave->station_address, 0x0300,
+ 4, data);
+
+ if (unlikely(ec_frame_send_receive(&frame))) return -1;
+
+ if (unlikely(frame.working_counter != 1)) {
+ printk(KERN_ERR "EtherCAT: Resetting CRC fault counters - Slave"
+ " %i did not respond!\n", slave->ring_position);
+ return -1;
+ }
+
+ return 0;
+}
+
+/*****************************************************************************/
+
/* Emacs-Konfiguration
;;; Local Variables: ***
;;; c-basic-offset:4 ***
--- a/master/slave.h Thu Feb 23 09:58:50 2006 +0000
+++ b/master/slave.h Thu Feb 23 13:38:54 2006 +0000
@@ -77,6 +77,7 @@
// Misc
void ec_slave_print(const ec_slave_t *);
+int ec_slave_check_crc(ec_slave_t *);
/*****************************************************************************/