Temporarily removed sysconfig script.
--- a/script/sysconfig Tue Feb 13 13:18:20 2007 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,58 +0,0 @@
-#------------------------------------------------------------------------------
-#
-# EtherCAT sysconfig file
-#
-# $Id$
-#
-#------------------------------------------------------------------------------
-
-#
-# PCI index of the (RTL8139-)EtherCAT device
-# Setting this is mandatory for the EtherCAT init script!
-#
-#DEVICE_INDEX=99
-
-#
-# Number of Ethernet-over-EtherCAT interfaces every master shall create
-# on startup. Default is 0.
-#
-#EOE_INTERFACES=0
-
-#
-# Bridge all EoE interfaces after master startup
-# This variable shall contain the name of the EoE bridge to set up.
-# If the variable is empty or undefined, no EoE bridge will be built.
-#
-#EOE_BRIDGE=eoebr0
-
-#
-# IP address of the EoE bridge
-# Set both EOE_IP_ADDRESS and EOE_IP_NETMASK to let the local host communicate
-# with devices on the EoE bridge.
-#
-#EOE_IP_ADDRESS=192.168.X.X
-
-#
-# IP netmask of the EoE bridge
-# See EOE_IP_ADDRESS.
-#
-#EOE_IP_NETMASK=255.255.255.0
-
-#
-# Renew default gateway after bridge installation.
-# Set this to the new default gateway, if the default route shall
-# be renewed after the bridge has been installed.
-#
-#EOE_GATEWAY=192.168.X.X
-
-#
-# List of extra interfaces to include in the EoE bridge.
-# Set this to interconnect the EoE bridge with other local interfaces.
-# If EOE_BRIDGE is empty or undefined, setting this variable has no effect.
-# Important: The IP address of these interfaces will be cleared. Set
-# EOE_IP_ADDRESS and EOE_IP_NETMASK accordingly to enable IP traffic to
-# extra interfaces.
-#
-#EOE_EXTRA_INTERFACES=eth0
-
-#------------------------------------------------------------------------------