--- a/Kbuild.in Mon Jan 04 11:27:37 2010 +0100
+++ b/Kbuild.in Mon Jan 04 11:28:29 2010 +0100
@@ -25,8 +25,14 @@
# EtherCAT technology and brand is only permitted in compliance with the
# industrial property and similar rights of Beckhoff Automation GmbH.
#
+# vi: syntax=make
+#
#------------------------------------------------------------------------------
obj-m := examples/ master/ devices/
+ifeq (@ENABLE_TTY@,1)
+ obj-m += tty/
+endif
+
#------------------------------------------------------------------------------
--- a/Makefile.am Mon Jan 04 11:27:37 2010 +0100
+++ b/Makefile.am Mon Jan 04 11:28:29 2010 +0100
@@ -43,6 +43,10 @@
SUBDIRS += lib
endif
+if ENABLE_TTY
+SUBDIRS += tty
+endif
+
# userspace example depends on lib/
SUBDIRS += examples
@@ -54,7 +58,8 @@
m4 \
master \
script \
- tool
+ tool \
+ tty
noinst_HEADERS = \
globals.h
@@ -75,6 +80,9 @@
modules_install:
$(MAKE) -C master modules_install
$(MAKE) -C devices modules_install
+if ENABLE_TTY
+ $(MAKE) -C tty modules_install
+endif
clean-local:
$(MAKE) -C "$(LINUX_SOURCE_DIR)" M="@abs_srcdir@" clean
--- a/NEWS Mon Jan 04 11:27:37 2010 +0100
+++ b/NEWS Mon Jan 04 11:28:29 2010 +0100
@@ -21,6 +21,7 @@
Introduced new method ec_datagram_zero() for that.
* Added phy_read and phy_write commands to ethercat tool.
* Added e100 driver for Intel PRO/100 NICs.
+ - Added e100 driver for 2.6.27.
- Added e100 driver for 2.6.28, thanks to Kim. H. Madsen.
- Added e100 driver for 2.6.29, thanks to Andre Puschmann.
* Added 8139too driver for kernels 2.6.25 (F. Pose), 2.6.26 (M. Luescher),
--- a/TODO Mon Jan 04 11:27:37 2010 +0100
+++ b/TODO Mon Jan 04 11:28:29 2010 +0100
@@ -21,28 +21,19 @@
- Check if register 0x0980 is working, to avoid clearing it when
configuring.
* Remove byte-swapping functions from user space.
-* EoE:
- - Only execute one EoE handler per cycle.
- - Mailbox protocol handlers.
- - Mailbox state machine using toggle bits.
* Implement 'ethercat foe_read --output-file ...'.
* Use ec_datagram_zero() where possible.
* Fix arguments of reg_read.
-* Sign/Abs type for reg_ commands?
* Number layout for reg_read.
* Show Record / Array / List type of SDOs.
-* Limit bandwidth of state machine datagram.
-* Read alias from register 0x0012 instead of SII.
* Finish library implementation.
* Rescan command.
* Override sync manager size?
-* Remove ecrt_domain_state()?
* Check force_config flag before error.
* Remove allow_scanning flag.
* Check for ioctl() interface version.
* Improve application-triggered SDO transfers by moving the state machine into
the SDO handlers.
-* Move device driver files in subdirectories.
* Document ec_fsm_foe members.
* Test KBUILD_EXTRA_SYMBOLS.
* Remove default buffer size in SDO upload.
@@ -54,10 +45,16 @@
* Change SDO index at runtime for SDO request.
* Implement ecrt_slave_config_request_state().
* Output skipped datagrams again.
+* Output warning on unmatched slave configuration.
+* ec_direction_t default
+* Send_ext context warn
+* XML hex
+* r8169
Future issues:
-* Segmented SDO downloads.
+* Mailbox protocol handlers.
+* Mailbox state machine using toggle bits.
* External memory for SDO transfers.
* C++ implementation of the library.
* Bus simulator interface.
--- a/configure.ac Mon Jan 04 11:27:37 2010 +0100
+++ b/configure.ac Mon Jan 04 11:28:29 2010 +0100
@@ -102,6 +102,29 @@
AC_MSG_RESULT([$LINUX_SOURCE_DIR (Kernel $LINUX_KERNEL_RELEASE)])
#------------------------------------------------------------------------------
+# Generic Ethernet driver
+#------------------------------------------------------------------------------
+
+AC_ARG_ENABLE([generic],
+ AS_HELP_STRING([--enable-generic],
+ [Enable generic Ethernet driver]),
+ [
+ case "${enableval}" in
+ yes) enablegeneric=1
+ ;;
+ no) enablegeneric=0
+ ;;
+ *) AC_MSG_ERROR([Invalid value for --enable-generic])
+ ;;
+ esac
+ ],
+ [enablegeneric=0]
+)
+
+AM_CONDITIONAL(ENABLE_GENERIC, test "x$enablegeneric" = "x1")
+AC_SUBST(ENABLE_GENERIC,[$enablegeneric])
+
+#------------------------------------------------------------------------------
# 8139too driver
#------------------------------------------------------------------------------
@@ -496,6 +519,29 @@
AM_CONDITIONAL(ENABLE_USERLIB, test "x$userlib" = "x1")
#------------------------------------------------------------------------------
+# TTY driver
+#------------------------------------------------------------------------------
+
+AC_ARG_ENABLE([tty],
+ AS_HELP_STRING([--enable-tty],
+ [Generation of the ec_tty module (default: no)]),
+ [
+ case "${enableval}" in
+ yes) tty=1
+ ;;
+ no) tty=0
+ ;;
+ *) AC_MSG_ERROR([Invalid value for --enable-tty])
+ ;;
+ esac
+ ],
+ [tty=0]
+)
+
+AM_CONDITIONAL(ENABLE_TTY, test "x$tty" = "x1")
+AC_SUBST(ENABLE_TTY,[$tty])
+
+#------------------------------------------------------------------------------
AC_CONFIG_FILES([
Doxyfile
@@ -514,6 +560,8 @@
examples/mini/Makefile
examples/rtai/Kbuild
examples/rtai/Makefile
+ examples/tty/Makefile
+ examples/tty/Kbuild
examples/user/Makefile
include/Makefile
lib/Makefile
@@ -525,6 +573,8 @@
script/init.d/ethercat
script/sysconfig/Makefile
tool/Makefile
+ tty/Makefile
+ tty/Kbuild
])
AC_OUTPUT
--- a/devices/8139too-2.6.31-ethercat.c Mon Jan 04 11:27:37 2010 +0100
+++ b/devices/8139too-2.6.31-ethercat.c Mon Jan 04 11:28:29 2010 +0100
@@ -1,6 +1,6 @@
/******************************************************************************
*
- * $Id: 8139too-2.6.31-ethercat.c 1779 2009-06-16 08:29:30Z fp $
+ * $Id$
*
* Copyright (C) 2006-2009 Florian Pose, Ingenieurgemeinschaft IgH
*
--- a/devices/Kbuild.in Mon Jan 04 11:27:37 2010 +0100
+++ b/devices/Kbuild.in Mon Jan 04 11:28:29 2010 +0100
@@ -37,6 +37,13 @@
hg id -i $(src)/.. 2>/dev/null || echo "unknown"; \
fi)
+ifeq (@ENABLE_GENERIC@,1)
+ EC_GENERIC_OBJ := generic.o
+ obj-m += ec_generic.o
+ ec_generic-objs := $(EC_GENERIC_OBJ)
+ CFLAGS_$(EC_GENERIC_OBJ) = -DREV=$(REV)
+endif
+
ifeq (@ENABLE_8139TOO@,1)
EC_8139TOO_OBJ := 8139too-@KERNEL_8139TOO@-ethercat.o
obj-m += ec_8139too.o
--- a/devices/Makefile.am Mon Jan 04 11:27:37 2010 +0100
+++ b/devices/Makefile.am Mon Jan 04 11:28:29 2010 +0100
@@ -63,11 +63,14 @@
e100-2.6.24-orig.c \
e100-2.6.26-ethercat.c \
e100-2.6.26-orig.c \
+ e100-2.6.27-ethercat.c \
+ e100-2.6.27-orig.c \
e100-2.6.28-ethercat.c \
e100-2.6.28-orig.c \
e100-2.6.29-ethercat.c \
e100-2.6.29-orig.c \
ecdev.h \
+ generic.c \
r8169-2.6.24-ethercat.c \
r8169-2.6.24-orig.c \
r8169-2.6.28-ethercat.c \
@@ -86,6 +89,9 @@
modules_install:
mkdir -p $(DESTDIR)$(LINUX_MOD_PATH)
+if ENABLE_GENERIC
+ cp $(srcdir)/ec_generic.ko $(DESTDIR)$(LINUX_MOD_PATH)
+endif
if ENABLE_8139TOO
cp $(srcdir)/ec_8139too.ko $(DESTDIR)$(LINUX_MOD_PATH)
endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e100-2.6.27-ethercat.c Mon Jan 04 11:28:29 2010 +0100
@@ -0,0 +1,3116 @@
+/******************************************************************************
+ *
+ * $Id$
+ *
+ * Copyright (C) 2007-2008 Florian Pose, Ingenieurgemeinschaft IgH
+ *
+ * This file is part of the IgH EtherCAT Master.
+ *
+ * The IgH EtherCAT Master is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ * The IgH EtherCAT Master is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+ * Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with the IgH EtherCAT Master; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * ---
+ *
+ * The license mentioned above concerns the source code only. Using the
+ * EtherCAT technology and brand is only permitted in compliance with the
+ * industrial property and similar rights of Beckhoff Automation GmbH.
+ *
+ * ---
+ *
+ * vim: noexpandtab
+ *
+ *****************************************************************************/
+
+/**
+ \file
+ EtherCAT driver for e100-compatible NICs.
+*/
+
+/* Former documentation: */
+
+/*******************************************************************************
+
+ Intel PRO/100 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/*
+ * e100.c: Intel(R) PRO/100 ethernet driver
+ *
+ * (Re)written 2003 by scott.feldman@intel.com. Based loosely on
+ * original e100 driver, but better described as a munging of
+ * e100, e1000, eepro100, tg3, 8139cp, and other drivers.
+ *
+ * References:
+ * Intel 8255x 10/100 Mbps Ethernet Controller Family,
+ * Open Source Software Developers Manual,
+ * http://sourceforge.net/projects/e1000
+ *
+ *
+ * Theory of Operation
+ *
+ * I. General
+ *
+ * The driver supports Intel(R) 10/100 Mbps PCI Fast Ethernet
+ * controller family, which includes the 82557, 82558, 82559, 82550,
+ * 82551, and 82562 devices. 82558 and greater controllers
+ * integrate the Intel 82555 PHY. The controllers are used in
+ * server and client network interface cards, as well as in
+ * LAN-On-Motherboard (LOM), CardBus, MiniPCI, and ICHx
+ * configurations. 8255x supports a 32-bit linear addressing
+ * mode and operates at 33Mhz PCI clock rate.
+ *
+ * II. Driver Operation
+ *
+ * Memory-mapped mode is used exclusively to access the device's
+ * shared-memory structure, the Control/Status Registers (CSR). All
+ * setup, configuration, and control of the device, including queuing
+ * of Tx, Rx, and configuration commands is through the CSR.
+ * cmd_lock serializes accesses to the CSR command register. cb_lock
+ * protects the shared Command Block List (CBL).
+ *
+ * 8255x is highly MII-compliant and all access to the PHY go
+ * through the Management Data Interface (MDI). Consequently, the
+ * driver leverages the mii.c library shared with other MII-compliant
+ * devices.
+ *
+ * Big- and Little-Endian byte order as well as 32- and 64-bit
+ * archs are supported. Weak-ordered memory and non-cache-coherent
+ * archs are supported.
+ *
+ * III. Transmit
+ *
+ * A Tx skb is mapped and hangs off of a TCB. TCBs are linked
+ * together in a fixed-size ring (CBL) thus forming the flexible mode
+ * memory structure. A TCB marked with the suspend-bit indicates
+ * the end of the ring. The last TCB processed suspends the
+ * controller, and the controller can be restarted by issue a CU
+ * resume command to continue from the suspend point, or a CU start
+ * command to start at a given position in the ring.
+ *
+ * Non-Tx commands (config, multicast setup, etc) are linked
+ * into the CBL ring along with Tx commands. The common structure
+ * used for both Tx and non-Tx commands is the Command Block (CB).
+ *
+ * cb_to_use is the next CB to use for queuing a command; cb_to_clean
+ * is the next CB to check for completion; cb_to_send is the first
+ * CB to start on in case of a previous failure to resume. CB clean
+ * up happens in interrupt context in response to a CU interrupt.
+ * cbs_avail keeps track of number of free CB resources available.
+ *
+ * Hardware padding of short packets to minimum packet size is
+ * enabled. 82557 pads with 7Eh, while the later controllers pad
+ * with 00h.
+ *
+ * IV. Receive
+ *
+ * The Receive Frame Area (RFA) comprises a ring of Receive Frame
+ * Descriptors (RFD) + data buffer, thus forming the simplified mode
+ * memory structure. Rx skbs are allocated to contain both the RFD
+ * and the data buffer, but the RFD is pulled off before the skb is
+ * indicated. The data buffer is aligned such that encapsulated
+ * protocol headers are u32-aligned. Since the RFD is part of the
+ * mapped shared memory, and completion status is contained within
+ * the RFD, the RFD must be dma_sync'ed to maintain a consistent
+ * view from software and hardware.
+ *
+ * In order to keep updates to the RFD link field from colliding with
+ * hardware writes to mark packets complete, we use the feature that
+ * hardware will not write to a size 0 descriptor and mark the previous
+ * packet as end-of-list (EL). After updating the link, we remove EL
+ * and only then restore the size such that hardware may use the
+ * previous-to-end RFD.
+ *
+ * Under typical operation, the receive unit (RU) is start once,
+ * and the controller happily fills RFDs as frames arrive. If
+ * replacement RFDs cannot be allocated, or the RU goes non-active,
+ * the RU must be restarted. Frame arrival generates an interrupt,
+ * and Rx indication and re-allocation happen in the same context,
+ * therefore no locking is required. A software-generated interrupt
+ * is generated from the watchdog to recover from a failed allocation
+ * scenario where all Rx resources have been indicated and none re-
+ * placed.
+ *
+ * V. Miscellaneous
+ *
+ * VLAN offloading of tagging, stripping and filtering is not
+ * supported, but driver will accommodate the extra 4-byte VLAN tag
+ * for processing by upper layers. Tx/Rx Checksum offloading is not
+ * supported. Tx Scatter/Gather is not supported. Jumbo Frames is
+ * not supported (hardware limitation).
+ *
+ * MagicPacket(tm) WoL support is enabled/disabled via ethtool.
+ *
+ * Thanks to JC (jchapman@katalix.com) for helping with
+ * testing/troubleshooting the development driver.
+ *
+ * TODO:
+ * o several entry points race with dev->close
+ * o check for tx-no-resources/stop Q races with tx clean/wake Q
+ *
+ * FIXES:
+ * 2005/12/02 - Michael O'Donnell <Michael.ODonnell at stratus dot com>
+ * - Stratus87247: protect MDI control register manipulations
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/mii.h>
+#include <linux/if_vlan.h>
+#include <linux/skbuff.h>
+#include <linux/ethtool.h>
+#include <linux/string.h>
+#include <asm/unaligned.h>
+
+// EtherCAT includes
+#include "../globals.h"
+#include "ecdev.h"
+
+#define DRV_NAME "ec_e100"
+
+#define DRV_EXT "-NAPI"
+#define DRV_VERSION "3.5.23-k4"DRV_EXT
+#define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver"
+#define DRV_COPYRIGHT "Copyright(c) 1999-2006 Intel Corporation"
+#define PFX DRV_NAME ": "
+
+#define E100_WATCHDOG_PERIOD (2 * HZ)
+#define E100_NAPI_WEIGHT 16
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_AUTHOR(DRV_COPYRIGHT);
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_AUTHOR("Mario Witkowski <mario.witkowski@w4systems.de>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION ", master " EC_MASTER_VERSION);
+
+void e100_ec_poll(struct net_device *);
+
+static int debug = 3;
+static int eeprom_bad_csum_allow = 0;
+static int use_io = 0;
+module_param(debug, int, 0);
+module_param(eeprom_bad_csum_allow, int, 0);
+module_param(use_io, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+MODULE_PARM_DESC(eeprom_bad_csum_allow, "Allow bad eeprom checksums");
+MODULE_PARM_DESC(use_io, "Force use of i/o access mode");
+#define DPRINTK(nlevel, klevel, fmt, args...) \
+ (void)((NETIF_MSG_##nlevel & nic->msg_enable) && \
+ printk(KERN_##klevel PFX "%s: %s: " fmt, nic->netdev->name, \
+ __FUNCTION__ , ## args))
+
+#define INTEL_8255X_ETHERNET_DEVICE(device_id, ich) {\
+ PCI_VENDOR_ID_INTEL, device_id, PCI_ANY_ID, PCI_ANY_ID, \
+ PCI_CLASS_NETWORK_ETHERNET << 8, 0xFFFF00, ich }
+static struct pci_device_id e100_id_table[] = {
+ INTEL_8255X_ETHERNET_DEVICE(0x1029, 0),
+ INTEL_8255X_ETHERNET_DEVICE(0x1030, 0),
+ INTEL_8255X_ETHERNET_DEVICE(0x1031, 3),
+ INTEL_8255X_ETHERNET_DEVICE(0x1032, 3),
+ INTEL_8255X_ETHERNET_DEVICE(0x1033, 3),
+ INTEL_8255X_ETHERNET_DEVICE(0x1034, 3),
+ INTEL_8255X_ETHERNET_DEVICE(0x1038, 3),
+ INTEL_8255X_ETHERNET_DEVICE(0x1039, 4),
+ INTEL_8255X_ETHERNET_DEVICE(0x103A, 4),
+ INTEL_8255X_ETHERNET_DEVICE(0x103B, 4),
+ INTEL_8255X_ETHERNET_DEVICE(0x103C, 4),
+ INTEL_8255X_ETHERNET_DEVICE(0x103D, 4),
+ INTEL_8255X_ETHERNET_DEVICE(0x103E, 4),
+ INTEL_8255X_ETHERNET_DEVICE(0x1050, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1051, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1052, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1053, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1054, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1055, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1056, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1057, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1059, 0),
+ INTEL_8255X_ETHERNET_DEVICE(0x1064, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x1065, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x1066, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x1067, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x1068, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x1069, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x106A, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x106B, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x1091, 7),
+ INTEL_8255X_ETHERNET_DEVICE(0x1092, 7),
+ INTEL_8255X_ETHERNET_DEVICE(0x1093, 7),
+ INTEL_8255X_ETHERNET_DEVICE(0x1094, 7),
+ INTEL_8255X_ETHERNET_DEVICE(0x1095, 7),
+ INTEL_8255X_ETHERNET_DEVICE(0x1209, 0),
+ INTEL_8255X_ETHERNET_DEVICE(0x1229, 0),
+ INTEL_8255X_ETHERNET_DEVICE(0x2449, 2),
+ INTEL_8255X_ETHERNET_DEVICE(0x2459, 2),
+ INTEL_8255X_ETHERNET_DEVICE(0x245D, 2),
+ INTEL_8255X_ETHERNET_DEVICE(0x27DC, 7),
+ { 0, }
+};
+
+// prevent from being loaded automatically
+//MODULE_DEVICE_TABLE(pci, e100_id_table);
+
+enum mac {
+ mac_82557_D100_A = 0,
+ mac_82557_D100_B = 1,
+ mac_82557_D100_C = 2,
+ mac_82558_D101_A4 = 4,
+ mac_82558_D101_B0 = 5,
+ mac_82559_D101M = 8,
+ mac_82559_D101S = 9,
+ mac_82550_D102 = 12,
+ mac_82550_D102_C = 13,
+ mac_82551_E = 14,
+ mac_82551_F = 15,
+ mac_82551_10 = 16,
+ mac_unknown = 0xFF,
+};
+
+enum phy {
+ phy_100a = 0x000003E0,
+ phy_100c = 0x035002A8,
+ phy_82555_tx = 0x015002A8,
+ phy_nsc_tx = 0x5C002000,
+ phy_82562_et = 0x033002A8,
+ phy_82562_em = 0x032002A8,
+ phy_82562_ek = 0x031002A8,
+ phy_82562_eh = 0x017002A8,
+ phy_unknown = 0xFFFFFFFF,
+};
+
+/* CSR (Control/Status Registers) */
+struct csr {
+ struct {
+ u8 status;
+ u8 stat_ack;
+ u8 cmd_lo;
+ u8 cmd_hi;
+ u32 gen_ptr;
+ } scb;
+ u32 port;
+ u16 flash_ctrl;
+ u8 eeprom_ctrl_lo;
+ u8 eeprom_ctrl_hi;
+ u32 mdi_ctrl;
+ u32 rx_dma_count;
+};
+
+enum scb_status {
+ rus_no_res = 0x08,
+ rus_ready = 0x10,
+ rus_mask = 0x3C,
+};
+
+enum ru_state {
+ RU_SUSPENDED = 0,
+ RU_RUNNING = 1,
+ RU_UNINITIALIZED = -1,
+};
+
+enum scb_stat_ack {
+ stat_ack_not_ours = 0x00,
+ stat_ack_sw_gen = 0x04,
+ stat_ack_rnr = 0x10,
+ stat_ack_cu_idle = 0x20,
+ stat_ack_frame_rx = 0x40,
+ stat_ack_cu_cmd_done = 0x80,
+ stat_ack_not_present = 0xFF,
+ stat_ack_rx = (stat_ack_sw_gen | stat_ack_rnr | stat_ack_frame_rx),
+ stat_ack_tx = (stat_ack_cu_idle | stat_ack_cu_cmd_done),
+};
+
+enum scb_cmd_hi {
+ irq_mask_none = 0x00,
+ irq_mask_all = 0x01,
+ irq_sw_gen = 0x02,
+};
+
+enum scb_cmd_lo {
+ cuc_nop = 0x00,
+ ruc_start = 0x01,
+ ruc_load_base = 0x06,
+ cuc_start = 0x10,
+ cuc_resume = 0x20,
+ cuc_dump_addr = 0x40,
+ cuc_dump_stats = 0x50,
+ cuc_load_base = 0x60,
+ cuc_dump_reset = 0x70,
+};
+
+enum cuc_dump {
+ cuc_dump_complete = 0x0000A005,
+ cuc_dump_reset_complete = 0x0000A007,
+};
+
+enum port {
+ software_reset = 0x0000,
+ selftest = 0x0001,
+ selective_reset = 0x0002,
+};
+
+enum eeprom_ctrl_lo {
+ eesk = 0x01,
+ eecs = 0x02,
+ eedi = 0x04,
+ eedo = 0x08,
+};
+
+enum mdi_ctrl {
+ mdi_write = 0x04000000,
+ mdi_read = 0x08000000,
+ mdi_ready = 0x10000000,
+};
+
+enum eeprom_op {
+ op_write = 0x05,
+ op_read = 0x06,
+ op_ewds = 0x10,
+ op_ewen = 0x13,
+};
+
+enum eeprom_offsets {
+ eeprom_cnfg_mdix = 0x03,
+ eeprom_id = 0x0A,
+ eeprom_config_asf = 0x0D,
+ eeprom_smbus_addr = 0x90,
+};
+
+enum eeprom_cnfg_mdix {
+ eeprom_mdix_enabled = 0x0080,
+};
+
+enum eeprom_id {
+ eeprom_id_wol = 0x0020,
+};
+
+enum eeprom_config_asf {
+ eeprom_asf = 0x8000,
+ eeprom_gcl = 0x4000,
+};
+
+enum cb_status {
+ cb_complete = 0x8000,
+ cb_ok = 0x2000,
+};
+
+enum cb_command {
+ cb_nop = 0x0000,
+ cb_iaaddr = 0x0001,
+ cb_config = 0x0002,
+ cb_multi = 0x0003,
+ cb_tx = 0x0004,
+ cb_ucode = 0x0005,
+ cb_dump = 0x0006,
+ cb_tx_sf = 0x0008,
+ cb_cid = 0x1f00,
+ cb_i = 0x2000,
+ cb_s = 0x4000,
+ cb_el = 0x8000,
+};
+
+struct rfd {
+ __le16 status;
+ __le16 command;
+ __le32 link;
+ __le32 rbd;
+ __le16 actual_size;
+ __le16 size;
+};
+
+struct rx {
+ struct rx *next, *prev;
+ struct sk_buff *skb;
+ dma_addr_t dma_addr;
+};
+
+#if defined(__BIG_ENDIAN_BITFIELD)
+#define X(a,b) b,a
+#else
+#define X(a,b) a,b
+#endif
+struct config {
+/*0*/ u8 X(byte_count:6, pad0:2);
+/*1*/ u8 X(X(rx_fifo_limit:4, tx_fifo_limit:3), pad1:1);
+/*2*/ u8 adaptive_ifs;
+/*3*/ u8 X(X(X(X(mwi_enable:1, type_enable:1), read_align_enable:1),
+ term_write_cache_line:1), pad3:4);
+/*4*/ u8 X(rx_dma_max_count:7, pad4:1);
+/*5*/ u8 X(tx_dma_max_count:7, dma_max_count_enable:1);
+/*6*/ u8 X(X(X(X(X(X(X(late_scb_update:1, direct_rx_dma:1),
+ tno_intr:1), cna_intr:1), standard_tcb:1), standard_stat_counter:1),
+ rx_discard_overruns:1), rx_save_bad_frames:1);
+/*7*/ u8 X(X(X(X(X(rx_discard_short_frames:1, tx_underrun_retry:2),
+ pad7:2), rx_extended_rfd:1), tx_two_frames_in_fifo:1),
+ tx_dynamic_tbd:1);
+/*8*/ u8 X(X(mii_mode:1, pad8:6), csma_disabled:1);
+/*9*/ u8 X(X(X(X(X(rx_tcpudp_checksum:1, pad9:3), vlan_arp_tco:1),
+ link_status_wake:1), arp_wake:1), mcmatch_wake:1);
+/*10*/ u8 X(X(X(pad10:3, no_source_addr_insertion:1), preamble_length:2),
+ loopback:2);
+/*11*/ u8 X(linear_priority:3, pad11:5);
+/*12*/ u8 X(X(linear_priority_mode:1, pad12:3), ifs:4);
+/*13*/ u8 ip_addr_lo;
+/*14*/ u8 ip_addr_hi;
+/*15*/ u8 X(X(X(X(X(X(X(promiscuous_mode:1, broadcast_disabled:1),
+ wait_after_win:1), pad15_1:1), ignore_ul_bit:1), crc_16_bit:1),
+ pad15_2:1), crs_or_cdt:1);
+/*16*/ u8 fc_delay_lo;
+/*17*/ u8 fc_delay_hi;
+/*18*/ u8 X(X(X(X(X(rx_stripping:1, tx_padding:1), rx_crc_transfer:1),
+ rx_long_ok:1), fc_priority_threshold:3), pad18:1);
+/*19*/ u8 X(X(X(X(X(X(X(addr_wake:1, magic_packet_disable:1),
+ fc_disable:1), fc_restop:1), fc_restart:1), fc_reject:1),
+ full_duplex_force:1), full_duplex_pin:1);
+/*20*/ u8 X(X(X(pad20_1:5, fc_priority_location:1), multi_ia:1), pad20_2:1);
+/*21*/ u8 X(X(pad21_1:3, multicast_all:1), pad21_2:4);
+/*22*/ u8 X(X(rx_d102_mode:1, rx_vlan_drop:1), pad22:6);
+ u8 pad_d102[9];
+};
+
+#define E100_MAX_MULTICAST_ADDRS 64
+struct multi {
+ __le16 count;
+ u8 addr[E100_MAX_MULTICAST_ADDRS * ETH_ALEN + 2/*pad*/];
+};
+
+/* Important: keep total struct u32-aligned */
+#define UCODE_SIZE 134
+struct cb {
+ __le16 status;
+ __le16 command;
+ __le32 link;
+ union {
+ u8 iaaddr[ETH_ALEN];
+ __le32 ucode[UCODE_SIZE];
+ struct config config;
+ struct multi multi;
+ struct {
+ u32 tbd_array;
+ u16 tcb_byte_count;
+ u8 threshold;
+ u8 tbd_count;
+ struct {
+ __le32 buf_addr;
+ __le16 size;
+ u16 eol;
+ } tbd;
+ } tcb;
+ __le32 dump_buffer_addr;
+ } u;
+ struct cb *next, *prev;
+ dma_addr_t dma_addr;
+ struct sk_buff *skb;
+};
+
+enum loopback {
+ lb_none = 0, lb_mac = 1, lb_phy = 3,
+};
+
+struct stats {
+ __le32 tx_good_frames, tx_max_collisions, tx_late_collisions,
+ tx_underruns, tx_lost_crs, tx_deferred, tx_single_collisions,
+ tx_multiple_collisions, tx_total_collisions;
+ __le32 rx_good_frames, rx_crc_errors, rx_alignment_errors,
+ rx_resource_errors, rx_overrun_errors, rx_cdt_errors,
+ rx_short_frame_errors;
+ __le32 fc_xmt_pause, fc_rcv_pause, fc_rcv_unsupported;
+ __le16 xmt_tco_frames, rcv_tco_frames;
+ __le32 complete;
+};
+
+struct mem {
+ struct {
+ u32 signature;
+ u32 result;
+ } selftest;
+ struct stats stats;
+ u8 dump_buf[596];
+};
+
+struct param_range {
+ u32 min;
+ u32 max;
+ u32 count;
+};
+
+struct params {
+ struct param_range rfds;
+ struct param_range cbs;
+};
+
+struct nic {
+ /* Begin: frequently used values: keep adjacent for cache effect */
+ u32 msg_enable ____cacheline_aligned;
+ struct net_device *netdev;
+ struct pci_dev *pdev;
+
+ struct rx *rxs ____cacheline_aligned;
+ struct rx *rx_to_use;
+ struct rx *rx_to_clean;
+ struct rfd blank_rfd;
+ enum ru_state ru_running;
+
+ spinlock_t cb_lock ____cacheline_aligned;
+ spinlock_t cmd_lock;
+ struct csr __iomem *csr;
+ enum scb_cmd_lo cuc_cmd;
+ unsigned int cbs_avail;
+ struct napi_struct napi;
+ struct cb *cbs;
+ struct cb *cb_to_use;
+ struct cb *cb_to_send;
+ struct cb *cb_to_clean;
+ __le16 tx_command;
+ /* End: frequently used values: keep adjacent for cache effect */
+
+ enum {
+ ich = (1 << 0),
+ promiscuous = (1 << 1),
+ multicast_all = (1 << 2),
+ wol_magic = (1 << 3),
+ ich_10h_workaround = (1 << 4),
+ } flags ____cacheline_aligned;
+
+ enum mac mac;
+ enum phy phy;
+ struct params params;
+ struct timer_list watchdog;
+ struct timer_list blink_timer;
+ struct mii_if_info mii;
+ struct work_struct tx_timeout_task;
+ enum loopback loopback;
+
+ struct mem *mem;
+ dma_addr_t dma_addr;
+
+ dma_addr_t cbs_dma_addr;
+ u8 adaptive_ifs;
+ u8 tx_threshold;
+ u32 tx_frames;
+ u32 tx_collisions;
+ u32 tx_deferred;
+ u32 tx_single_collisions;
+ u32 tx_multiple_collisions;
+ u32 tx_fc_pause;
+ u32 tx_tco_frames;
+
+ u32 rx_fc_pause;
+ u32 rx_fc_unsupported;
+ u32 rx_tco_frames;
+ u32 rx_over_length_errors;
+
+ u16 leds;
+ u16 eeprom_wc;
+ __le16 eeprom[256];
+ spinlock_t mdio_lock;
+
+ ec_device_t *ecdev;
+ unsigned long ec_watchdog_jiffies;
+};
+
+static inline void e100_write_flush(struct nic *nic)
+{
+ /* Flush previous PCI writes through intermediate bridges
+ * by doing a benign read */
+ (void)ioread8(&nic->csr->scb.status);
+}
+
+static void e100_enable_irq(struct nic *nic)
+{
+ unsigned long flags;
+
+ if (nic->ecdev)
+ return;
+
+ spin_lock_irqsave(&nic->cmd_lock, flags);
+ iowrite8(irq_mask_none, &nic->csr->scb.cmd_hi);
+ e100_write_flush(nic);
+ spin_unlock_irqrestore(&nic->cmd_lock, flags);
+}
+
+static void e100_disable_irq(struct nic *nic)
+{
+ unsigned long flags = 0;
+
+ if (!nic->ecdev)
+ spin_lock_irqsave(&nic->cmd_lock, flags);
+ iowrite8(irq_mask_all, &nic->csr->scb.cmd_hi);
+ e100_write_flush(nic);
+ if (!nic->ecdev)
+ spin_unlock_irqrestore(&nic->cmd_lock, flags);
+}
+
+static void e100_hw_reset(struct nic *nic)
+{
+ /* Put CU and RU into idle with a selective reset to get
+ * device off of PCI bus */
+ iowrite32(selective_reset, &nic->csr->port);
+ e100_write_flush(nic); udelay(20);
+
+ /* Now fully reset device */
+ iowrite32(software_reset, &nic->csr->port);
+ e100_write_flush(nic); udelay(20);
+
+ /* Mask off our interrupt line - it's unmasked after reset */
+ e100_disable_irq(nic);
+}
+
+static int e100_self_test(struct nic *nic)
+{
+ u32 dma_addr = nic->dma_addr + offsetof(struct mem, selftest);
+
+ /* Passing the self-test is a pretty good indication
+ * that the device can DMA to/from host memory */
+
+ nic->mem->selftest.signature = 0;
+ nic->mem->selftest.result = 0xFFFFFFFF;
+
+ iowrite32(selftest | dma_addr, &nic->csr->port);
+ e100_write_flush(nic);
+ /* Wait 10 msec for self-test to complete */
+ msleep(10);
+
+ /* Interrupts are enabled after self-test */
+ e100_disable_irq(nic);
+
+ /* Check results of self-test */
+ if(nic->mem->selftest.result != 0) {
+ DPRINTK(HW, ERR, "Self-test failed: result=0x%08X\n",
+ nic->mem->selftest.result);
+ return -ETIMEDOUT;
+ }
+ if(nic->mem->selftest.signature == 0) {
+ DPRINTK(HW, ERR, "Self-test failed: timed out\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static void e100_eeprom_write(struct nic *nic, u16 addr_len, u16 addr, __le16 data)
+{
+ u32 cmd_addr_data[3];
+ u8 ctrl;
+ int i, j;
+
+ /* Three cmds: write/erase enable, write data, write/erase disable */
+ cmd_addr_data[0] = op_ewen << (addr_len - 2);
+ cmd_addr_data[1] = (((op_write << addr_len) | addr) << 16) |
+ le16_to_cpu(data);
+ cmd_addr_data[2] = op_ewds << (addr_len - 2);
+
+ /* Bit-bang cmds to write word to eeprom */
+ for(j = 0; j < 3; j++) {
+
+ /* Chip select */
+ iowrite8(eecs | eesk, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+
+ for(i = 31; i >= 0; i--) {
+ ctrl = (cmd_addr_data[j] & (1 << i)) ?
+ eecs | eedi : eecs;
+ iowrite8(ctrl, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+
+ iowrite8(ctrl | eesk, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+ }
+ /* Wait 10 msec for cmd to complete */
+ msleep(10);
+
+ /* Chip deselect */
+ iowrite8(0, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+ }
+};
+
+/* General technique stolen from the eepro100 driver - very clever */
+static __le16 e100_eeprom_read(struct nic *nic, u16 *addr_len, u16 addr)
+{
+ u32 cmd_addr_data;
+ u16 data = 0;
+ u8 ctrl;
+ int i;
+
+ cmd_addr_data = ((op_read << *addr_len) | addr) << 16;
+
+ /* Chip select */
+ iowrite8(eecs | eesk, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+
+ /* Bit-bang to read word from eeprom */
+ for(i = 31; i >= 0; i--) {
+ ctrl = (cmd_addr_data & (1 << i)) ? eecs | eedi : eecs;
+ iowrite8(ctrl, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+
+ iowrite8(ctrl | eesk, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+
+ /* Eeprom drives a dummy zero to EEDO after receiving
+ * complete address. Use this to adjust addr_len. */
+ ctrl = ioread8(&nic->csr->eeprom_ctrl_lo);
+ if(!(ctrl & eedo) && i > 16) {
+ *addr_len -= (i - 16);
+ i = 17;
+ }
+
+ data = (data << 1) | (ctrl & eedo ? 1 : 0);
+ }
+
+ /* Chip deselect */
+ iowrite8(0, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+
+ return cpu_to_le16(data);
+};
+
+/* Load entire EEPROM image into driver cache and validate checksum */
+static int e100_eeprom_load(struct nic *nic)
+{
+ u16 addr, addr_len = 8, checksum = 0;
+
+ /* Try reading with an 8-bit addr len to discover actual addr len */
+ e100_eeprom_read(nic, &addr_len, 0);
+ nic->eeprom_wc = 1 << addr_len;
+
+ for(addr = 0; addr < nic->eeprom_wc; addr++) {
+ nic->eeprom[addr] = e100_eeprom_read(nic, &addr_len, addr);
+ if(addr < nic->eeprom_wc - 1)
+ checksum += le16_to_cpu(nic->eeprom[addr]);
+ }
+
+ /* The checksum, stored in the last word, is calculated such that
+ * the sum of words should be 0xBABA */
+ if (cpu_to_le16(0xBABA - checksum) != nic->eeprom[nic->eeprom_wc - 1]) {
+ DPRINTK(PROBE, ERR, "EEPROM corrupted\n");
+ if (!eeprom_bad_csum_allow)
+ return -EAGAIN;
+ }
+
+ return 0;
+}
+
+/* Save (portion of) driver EEPROM cache to device and update checksum */
+static int e100_eeprom_save(struct nic *nic, u16 start, u16 count)
+{
+ u16 addr, addr_len = 8, checksum = 0;
+
+ /* Try reading with an 8-bit addr len to discover actual addr len */
+ e100_eeprom_read(nic, &addr_len, 0);
+ nic->eeprom_wc = 1 << addr_len;
+
+ if(start + count >= nic->eeprom_wc)
+ return -EINVAL;
+
+ for(addr = start; addr < start + count; addr++)
+ e100_eeprom_write(nic, addr_len, addr, nic->eeprom[addr]);
+
+ /* The checksum, stored in the last word, is calculated such that
+ * the sum of words should be 0xBABA */
+ for(addr = 0; addr < nic->eeprom_wc - 1; addr++)
+ checksum += le16_to_cpu(nic->eeprom[addr]);
+ nic->eeprom[nic->eeprom_wc - 1] = cpu_to_le16(0xBABA - checksum);
+ e100_eeprom_write(nic, addr_len, nic->eeprom_wc - 1,
+ nic->eeprom[nic->eeprom_wc - 1]);
+
+ return 0;
+}
+
+#define E100_WAIT_SCB_TIMEOUT 20000 /* we might have to wait 100ms!!! */
+#define E100_WAIT_SCB_FAST 20 /* delay like the old code */
+static int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr)
+{
+ unsigned long flags = 0;
+ unsigned int i;
+ int err = 0;
+
+ if (!nic->ecdev)
+ spin_lock_irqsave(&nic->cmd_lock, flags);
+
+ /* Previous command is accepted when SCB clears */
+ for(i = 0; i < E100_WAIT_SCB_TIMEOUT; i++) {
+ if(likely(!ioread8(&nic->csr->scb.cmd_lo)))
+ break;
+ cpu_relax();
+ if(unlikely(i > E100_WAIT_SCB_FAST))
+ udelay(5);
+ }
+ if(unlikely(i == E100_WAIT_SCB_TIMEOUT)) {
+ err = -EAGAIN;
+ goto err_unlock;
+ }
+
+ if(unlikely(cmd != cuc_resume))
+ iowrite32(dma_addr, &nic->csr->scb.gen_ptr);
+ iowrite8(cmd, &nic->csr->scb.cmd_lo);
+
+err_unlock:
+ if (!nic->ecdev)
+ spin_unlock_irqrestore(&nic->cmd_lock, flags);
+
+ return err;
+}
+
+static int e100_exec_cb(struct nic *nic, struct sk_buff *skb,
+ void (*cb_prepare)(struct nic *, struct cb *, struct sk_buff *))
+{
+ struct cb *cb;
+ unsigned long flags = 0;
+ int err = 0;
+
+ if (!nic->ecdev)
+ spin_lock_irqsave(&nic->cb_lock, flags);
+
+ if(unlikely(!nic->cbs_avail)) {
+ err = -ENOMEM;
+ goto err_unlock;
+ }
+
+ cb = nic->cb_to_use;
+ nic->cb_to_use = cb->next;
+ nic->cbs_avail--;
+ cb->skb = skb;
+
+ if(unlikely(!nic->cbs_avail))
+ err = -ENOSPC;
+
+ cb_prepare(nic, cb, skb);
+
+ /* Order is important otherwise we'll be in a race with h/w:
+ * set S-bit in current first, then clear S-bit in previous. */
+ cb->command |= cpu_to_le16(cb_s);
+ wmb();
+ cb->prev->command &= cpu_to_le16(~cb_s);
+
+ while(nic->cb_to_send != nic->cb_to_use) {
+ if(unlikely(e100_exec_cmd(nic, nic->cuc_cmd,
+ nic->cb_to_send->dma_addr))) {
+ /* Ok, here's where things get sticky. It's
+ * possible that we can't schedule the command
+ * because the controller is too busy, so
+ * let's just queue the command and try again
+ * when another command is scheduled. */
+ if(err == -ENOSPC) {
+ //request a reset
+ schedule_work(&nic->tx_timeout_task);
+ }
+ break;
+ } else {
+ nic->cuc_cmd = cuc_resume;
+ nic->cb_to_send = nic->cb_to_send->next;
+ }
+ }
+
+err_unlock:
+ if (!nic->ecdev)
+ spin_unlock_irqrestore(&nic->cb_lock, flags);
+
+ return err;
+}
+
+static u16 mdio_ctrl(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data)
+{
+ u32 data_out = 0;
+ unsigned int i;
+ unsigned long flags = 0;
+
+
+ /*
+ * Stratus87247: we shouldn't be writing the MDI control
+ * register until the Ready bit shows True. Also, since
+ * manipulation of the MDI control registers is a multi-step
+ * procedure it should be done under lock.
+ */
+ if (!nic->ecdev)
+ spin_lock_irqsave(&nic->mdio_lock, flags);
+ for (i = 100; i; --i) {
+ if (ioread32(&nic->csr->mdi_ctrl) & mdi_ready)
+ break;
+ udelay(20);
+ }
+ if (unlikely(!i)) {
+ printk("e100.mdio_ctrl(%s) won't go Ready\n",
+ nic->netdev->name );
+ if (!nic->ecdev)
+ spin_unlock_irqrestore(&nic->mdio_lock, flags);
+ return 0; /* No way to indicate timeout error */
+ }
+ iowrite32((reg << 16) | (addr << 21) | dir | data, &nic->csr->mdi_ctrl);
+
+ for (i = 0; i < 100; i++) {
+ udelay(20);
+ if ((data_out = ioread32(&nic->csr->mdi_ctrl)) & mdi_ready)
+ break;
+ }
+ if (!nic->ecdev)
+ spin_unlock_irqrestore(&nic->mdio_lock, flags);
+ DPRINTK(HW, DEBUG,
+ "%s:addr=%d, reg=%d, data_in=0x%04X, data_out=0x%04X\n",
+ dir == mdi_read ? "READ" : "WRITE", addr, reg, data, data_out);
+ return (u16)data_out;
+}
+
+static int mdio_read(struct net_device *netdev, int addr, int reg)
+{
+ return mdio_ctrl(netdev_priv(netdev), addr, mdi_read, reg, 0);
+}
+
+static void mdio_write(struct net_device *netdev, int addr, int reg, int data)
+{
+ mdio_ctrl(netdev_priv(netdev), addr, mdi_write, reg, data);
+}
+
+static void e100_get_defaults(struct nic *nic)
+{
+ struct param_range rfds = { .min = 16, .max = 256, .count = 256 };
+ struct param_range cbs = { .min = 64, .max = 256, .count = 128 };
+
+ /* MAC type is encoded as rev ID; exception: ICH is treated as 82559 */
+ nic->mac = (nic->flags & ich) ? mac_82559_D101M : nic->pdev->revision;
+ if(nic->mac == mac_unknown)
+ nic->mac = mac_82557_D100_A;
+
+ nic->params.rfds = rfds;
+ nic->params.cbs = cbs;
+
+ /* Quadwords to DMA into FIFO before starting frame transmit */
+ nic->tx_threshold = 0xE0;
+
+ /* no interrupt for every tx completion, delay = 256us if not 557 */
+ nic->tx_command = cpu_to_le16(cb_tx | cb_tx_sf |
+ ((nic->mac >= mac_82558_D101_A4) ? cb_cid : cb_i));
+
+ /* Template for a freshly allocated RFD */
+ nic->blank_rfd.command = 0;
+ nic->blank_rfd.rbd = cpu_to_le32(0xFFFFFFFF);
+ nic->blank_rfd.size = cpu_to_le16(VLAN_ETH_FRAME_LEN);
+
+ /* MII setup */
+ nic->mii.phy_id_mask = 0x1F;
+ nic->mii.reg_num_mask = 0x1F;
+ nic->mii.dev = nic->netdev;
+ nic->mii.mdio_read = mdio_read;
+ nic->mii.mdio_write = mdio_write;
+}
+
+static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
+{
+ struct config *config = &cb->u.config;
+ u8 *c = (u8 *)config;
+
+ cb->command = cpu_to_le16(cb_config);
+
+ memset(config, 0, sizeof(struct config));
+
+ config->byte_count = 0x16; /* bytes in this struct */
+ config->rx_fifo_limit = 0x8; /* bytes in FIFO before DMA */
+ config->direct_rx_dma = 0x1; /* reserved */
+ config->standard_tcb = 0x1; /* 1=standard, 0=extended */
+ config->standard_stat_counter = 0x1; /* 1=standard, 0=extended */
+ config->rx_discard_short_frames = 0x1; /* 1=discard, 0=pass */
+ config->tx_underrun_retry = 0x3; /* # of underrun retries */
+ config->mii_mode = 0x1; /* 1=MII mode, 0=503 mode */
+ config->pad10 = 0x6;
+ config->no_source_addr_insertion = 0x1; /* 1=no, 0=yes */
+ config->preamble_length = 0x2; /* 0=1, 1=3, 2=7, 3=15 bytes */
+ config->ifs = 0x6; /* x16 = inter frame spacing */
+ config->ip_addr_hi = 0xF2; /* ARP IP filter - not used */
+ config->pad15_1 = 0x1;
+ config->pad15_2 = 0x1;
+ config->crs_or_cdt = 0x0; /* 0=CRS only, 1=CRS or CDT */
+ config->fc_delay_hi = 0x40; /* time delay for fc frame */
+ config->tx_padding = 0x1; /* 1=pad short frames */
+ config->fc_priority_threshold = 0x7; /* 7=priority fc disabled */
+ config->pad18 = 0x1;
+ config->full_duplex_pin = 0x1; /* 1=examine FDX# pin */
+ config->pad20_1 = 0x1F;
+ config->fc_priority_location = 0x1; /* 1=byte#31, 0=byte#19 */
+ config->pad21_1 = 0x5;
+
+ config->adaptive_ifs = nic->adaptive_ifs;
+ config->loopback = nic->loopback;
+
+ if(nic->mii.force_media && nic->mii.full_duplex)
+ config->full_duplex_force = 0x1; /* 1=force, 0=auto */
+
+ if(nic->flags & promiscuous || nic->loopback) {
+ config->rx_save_bad_frames = 0x1; /* 1=save, 0=discard */
+ config->rx_discard_short_frames = 0x0; /* 1=discard, 0=save */
+ config->promiscuous_mode = 0x1; /* 1=on, 0=off */
+ }
+
+ if(nic->flags & multicast_all)
+ config->multicast_all = 0x1; /* 1=accept, 0=no */
+
+ /* disable WoL when up */
+ if (nic->ecdev ||
+ (netif_running(nic->netdev) || !(nic->flags & wol_magic)))
+ config->magic_packet_disable = 0x1; /* 1=off, 0=on */
+
+ if(nic->mac >= mac_82558_D101_A4) {
+ config->fc_disable = 0x1; /* 1=Tx fc off, 0=Tx fc on */
+ config->mwi_enable = 0x1; /* 1=enable, 0=disable */
+ config->standard_tcb = 0x0; /* 1=standard, 0=extended */
+ config->rx_long_ok = 0x1; /* 1=VLANs ok, 0=standard */
+ if (nic->mac >= mac_82559_D101M) {
+ config->tno_intr = 0x1; /* TCO stats enable */
+ /* Enable TCO in extended config */
+ if (nic->mac >= mac_82551_10) {
+ config->byte_count = 0x20; /* extended bytes */
+ config->rx_d102_mode = 0x1; /* GMRC for TCO */
+ }
+ } else {
+ config->standard_stat_counter = 0x0;
+ }
+ }
+
+ DPRINTK(HW, DEBUG, "[00-07]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
+ c[0], c[1], c[2], c[3], c[4], c[5], c[6], c[7]);
+ DPRINTK(HW, DEBUG, "[08-15]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
+ c[8], c[9], c[10], c[11], c[12], c[13], c[14], c[15]);
+ DPRINTK(HW, DEBUG, "[16-23]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
+ c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]);
+}
+
+/********************************************************/
+/* Micro code for 8086:1229 Rev 8 */
+/********************************************************/
+
+/* Parameter values for the D101M B-step */
+#define D101M_CPUSAVER_TIMER_DWORD 78
+#define D101M_CPUSAVER_BUNDLE_DWORD 65
+#define D101M_CPUSAVER_MIN_SIZE_DWORD 126
+
+#define D101M_B_RCVBUNDLE_UCODE \
+{\
+0x00550215, 0xFFFF0437, 0xFFFFFFFF, 0x06A70789, 0xFFFFFFFF, 0x0558FFFF, \
+0x000C0001, 0x00101312, 0x000C0008, 0x00380216, \
+0x0010009C, 0x00204056, 0x002380CC, 0x00380056, \
+0x0010009C, 0x00244C0B, 0x00000800, 0x00124818, \
+0x00380438, 0x00000000, 0x00140000, 0x00380555, \
+0x00308000, 0x00100662, 0x00100561, 0x000E0408, \
+0x00134861, 0x000C0002, 0x00103093, 0x00308000, \
+0x00100624, 0x00100561, 0x000E0408, 0x00100861, \
+0x000C007E, 0x00222C21, 0x000C0002, 0x00103093, \
+0x00380C7A, 0x00080000, 0x00103090, 0x00380C7A, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x0010009C, 0x00244C2D, 0x00010004, 0x00041000, \
+0x003A0437, 0x00044010, 0x0038078A, 0x00000000, \
+0x00100099, 0x00206C7A, 0x0010009C, 0x00244C48, \
+0x00130824, 0x000C0001, 0x00101213, 0x00260C75, \
+0x00041000, 0x00010004, 0x00130826, 0x000C0006, \
+0x002206A8, 0x0013C926, 0x00101313, 0x003806A8, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00080600, 0x00101B10, 0x00050004, 0x00100826, \
+0x00101210, 0x00380C34, 0x00000000, 0x00000000, \
+0x0021155B, 0x00100099, 0x00206559, 0x0010009C, \
+0x00244559, 0x00130836, 0x000C0000, 0x00220C62, \
+0x000C0001, 0x00101B13, 0x00229C0E, 0x00210C0E, \
+0x00226C0E, 0x00216C0E, 0x0022FC0E, 0x00215C0E, \
+0x00214C0E, 0x00380555, 0x00010004, 0x00041000, \
+0x00278C67, 0x00040800, 0x00018100, 0x003A0437, \
+0x00130826, 0x000C0001, 0x00220559, 0x00101313, \
+0x00380559, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00130831, 0x0010090B, 0x00124813, \
+0x000CFF80, 0x002606AB, 0x00041000, 0x00010004, \
+0x003806A8, 0x00000000, 0x00000000, 0x00000000, \
+}
+
+/********************************************************/
+/* Micro code for 8086:1229 Rev 9 */
+/********************************************************/
+
+/* Parameter values for the D101S */
+#define D101S_CPUSAVER_TIMER_DWORD 78
+#define D101S_CPUSAVER_BUNDLE_DWORD 67
+#define D101S_CPUSAVER_MIN_SIZE_DWORD 128
+
+#define D101S_RCVBUNDLE_UCODE \
+{\
+0x00550242, 0xFFFF047E, 0xFFFFFFFF, 0x06FF0818, 0xFFFFFFFF, 0x05A6FFFF, \
+0x000C0001, 0x00101312, 0x000C0008, 0x00380243, \
+0x0010009C, 0x00204056, 0x002380D0, 0x00380056, \
+0x0010009C, 0x00244F8B, 0x00000800, 0x00124818, \
+0x0038047F, 0x00000000, 0x00140000, 0x003805A3, \
+0x00308000, 0x00100610, 0x00100561, 0x000E0408, \
+0x00134861, 0x000C0002, 0x00103093, 0x00308000, \
+0x00100624, 0x00100561, 0x000E0408, 0x00100861, \
+0x000C007E, 0x00222FA1, 0x000C0002, 0x00103093, \
+0x00380F90, 0x00080000, 0x00103090, 0x00380F90, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x0010009C, 0x00244FAD, 0x00010004, 0x00041000, \
+0x003A047E, 0x00044010, 0x00380819, 0x00000000, \
+0x00100099, 0x00206FFD, 0x0010009A, 0x0020AFFD, \
+0x0010009C, 0x00244FC8, 0x00130824, 0x000C0001, \
+0x00101213, 0x00260FF7, 0x00041000, 0x00010004, \
+0x00130826, 0x000C0006, 0x00220700, 0x0013C926, \
+0x00101313, 0x00380700, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00080600, 0x00101B10, 0x00050004, 0x00100826, \
+0x00101210, 0x00380FB6, 0x00000000, 0x00000000, \
+0x002115A9, 0x00100099, 0x002065A7, 0x0010009A, \
+0x0020A5A7, 0x0010009C, 0x002445A7, 0x00130836, \
+0x000C0000, 0x00220FE4, 0x000C0001, 0x00101B13, \
+0x00229F8E, 0x00210F8E, 0x00226F8E, 0x00216F8E, \
+0x0022FF8E, 0x00215F8E, 0x00214F8E, 0x003805A3, \
+0x00010004, 0x00041000, 0x00278FE9, 0x00040800, \
+0x00018100, 0x003A047E, 0x00130826, 0x000C0001, \
+0x002205A7, 0x00101313, 0x003805A7, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00130831, \
+0x0010090B, 0x00124813, 0x000CFF80, 0x00260703, \
+0x00041000, 0x00010004, 0x00380700 \
+}
+
+/********************************************************/
+/* Micro code for the 8086:1229 Rev F/10 */
+/********************************************************/
+
+/* Parameter values for the D102 E-step */
+#define D102_E_CPUSAVER_TIMER_DWORD 42
+#define D102_E_CPUSAVER_BUNDLE_DWORD 54
+#define D102_E_CPUSAVER_MIN_SIZE_DWORD 46
+
+#define D102_E_RCVBUNDLE_UCODE \
+{\
+0x007D028F, 0x0E4204F9, 0x14ED0C85, 0x14FA14E9, 0x0EF70E36, 0x1FFF1FFF, \
+0x00E014B9, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014BD, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014D5, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014C1, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014C8, 0x00000000, 0x00000000, 0x00000000, \
+0x00200600, 0x00E014EE, 0x00000000, 0x00000000, \
+0x0030FF80, 0x00940E46, 0x00038200, 0x00102000, \
+0x00E00E43, 0x00000000, 0x00000000, 0x00000000, \
+0x00300006, 0x00E014FB, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000, \
+0x00906EFD, 0x00900EFD, 0x00E00EF8, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+}
+
+static void e100_setup_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb)
+{
+/* *INDENT-OFF* */
+ static struct {
+ u32 ucode[UCODE_SIZE + 1];
+ u8 mac;
+ u8 timer_dword;
+ u8 bundle_dword;
+ u8 min_size_dword;
+ } ucode_opts[] = {
+ { D101M_B_RCVBUNDLE_UCODE,
+ mac_82559_D101M,
+ D101M_CPUSAVER_TIMER_DWORD,
+ D101M_CPUSAVER_BUNDLE_DWORD,
+ D101M_CPUSAVER_MIN_SIZE_DWORD },
+ { D101S_RCVBUNDLE_UCODE,
+ mac_82559_D101S,
+ D101S_CPUSAVER_TIMER_DWORD,
+ D101S_CPUSAVER_BUNDLE_DWORD,
+ D101S_CPUSAVER_MIN_SIZE_DWORD },
+ { D102_E_RCVBUNDLE_UCODE,
+ mac_82551_F,
+ D102_E_CPUSAVER_TIMER_DWORD,
+ D102_E_CPUSAVER_BUNDLE_DWORD,
+ D102_E_CPUSAVER_MIN_SIZE_DWORD },
+ { D102_E_RCVBUNDLE_UCODE,
+ mac_82551_10,
+ D102_E_CPUSAVER_TIMER_DWORD,
+ D102_E_CPUSAVER_BUNDLE_DWORD,
+ D102_E_CPUSAVER_MIN_SIZE_DWORD },
+ { {0}, 0, 0, 0, 0}
+ }, *opts;
+/* *INDENT-ON* */
+
+/*************************************************************************
+* CPUSaver parameters
+*
+* All CPUSaver parameters are 16-bit literals that are part of a
+* "move immediate value" instruction. By changing the value of
+* the literal in the instruction before the code is loaded, the
+* driver can change the algorithm.
+*
+* INTDELAY - This loads the dead-man timer with its initial value.
+* When this timer expires the interrupt is asserted, and the
+* timer is reset each time a new packet is received. (see
+* BUNDLEMAX below to set the limit on number of chained packets)
+* The current default is 0x600 or 1536. Experiments show that
+* the value should probably stay within the 0x200 - 0x1000.
+*
+* BUNDLEMAX -
+* This sets the maximum number of frames that will be bundled. In
+* some situations, such as the TCP windowing algorithm, it may be
+* better to limit the growth of the bundle size than let it go as
+* high as it can, because that could cause too much added latency.
+* The default is six, because this is the number of packets in the
+* default TCP window size. A value of 1 would make CPUSaver indicate
+* an interrupt for every frame received. If you do not want to put
+* a limit on the bundle size, set this value to xFFFF.
+*
+* BUNDLESMALL -
+* This contains a bit-mask describing the minimum size frame that
+* will be bundled. The default masks the lower 7 bits, which means
+* that any frame less than 128 bytes in length will not be bundled,
+* but will instead immediately generate an interrupt. This does
+* not affect the current bundle in any way. Any frame that is 128
+* bytes or large will be bundled normally. This feature is meant
+* to provide immediate indication of ACK frames in a TCP environment.
+* Customers were seeing poor performance when a machine with CPUSaver
+* enabled was sending but not receiving. The delay introduced when
+* the ACKs were received was enough to reduce total throughput, because
+* the sender would sit idle until the ACK was finally seen.
+*
+* The current default is 0xFF80, which masks out the lower 7 bits.
+* This means that any frame which is x7F (127) bytes or smaller
+* will cause an immediate interrupt. Because this value must be a
+* bit mask, there are only a few valid values that can be used. To
+* turn this feature off, the driver can write the value xFFFF to the
+* lower word of this instruction (in the same way that the other
+* parameters are used). Likewise, a value of 0xF800 (2047) would
+* cause an interrupt to be generated for every frame, because all
+* standard Ethernet frames are <= 2047 bytes in length.
+*************************************************************************/
+
+/* if you wish to disable the ucode functionality, while maintaining the
+ * workarounds it provides, set the following defines to:
+ * BUNDLESMALL 0
+ * BUNDLEMAX 1
+ * INTDELAY 1
+ */
+#define BUNDLESMALL 1
+#define BUNDLEMAX (u16)6
+#define INTDELAY (u16)1536 /* 0x600 */
+
+ /* do not load u-code for ICH devices */
+ if (nic->flags & ich)
+ goto noloaducode;
+
+ /* Search for ucode match against h/w revision */
+ for (opts = ucode_opts; opts->mac; opts++) {
+ int i;
+ u32 *ucode = opts->ucode;
+ if (nic->mac != opts->mac)
+ continue;
+
+ /* Insert user-tunable settings */
+ ucode[opts->timer_dword] &= 0xFFFF0000;
+ ucode[opts->timer_dword] |= INTDELAY;
+ ucode[opts->bundle_dword] &= 0xFFFF0000;
+ ucode[opts->bundle_dword] |= BUNDLEMAX;
+ ucode[opts->min_size_dword] &= 0xFFFF0000;
+ ucode[opts->min_size_dword] |= (BUNDLESMALL) ? 0xFFFF : 0xFF80;
+
+ for (i = 0; i < UCODE_SIZE; i++)
+ cb->u.ucode[i] = cpu_to_le32(ucode[i]);
+ cb->command = cpu_to_le16(cb_ucode | cb_el);
+ return;
+ }
+
+noloaducode:
+ cb->command = cpu_to_le16(cb_nop | cb_el);
+}
+
+static inline int e100_exec_cb_wait(struct nic *nic, struct sk_buff *skb,
+ void (*cb_prepare)(struct nic *, struct cb *, struct sk_buff *))
+{
+ int err = 0, counter = 50;
+ struct cb *cb = nic->cb_to_clean;
+
+ if ((err = e100_exec_cb(nic, NULL, e100_setup_ucode)))
+ DPRINTK(PROBE,ERR, "ucode cmd failed with error %d\n", err);
+
+ /* must restart cuc */
+ nic->cuc_cmd = cuc_start;
+
+ /* wait for completion */
+ e100_write_flush(nic);
+ udelay(10);
+
+ /* wait for possibly (ouch) 500ms */
+ while (!(cb->status & cpu_to_le16(cb_complete))) {
+ msleep(10);
+ if (!--counter) break;
+ }
+
+ /* ack any interrupts, something could have been set */
+ iowrite8(~0, &nic->csr->scb.stat_ack);
+
+ /* if the command failed, or is not OK, notify and return */
+ if (!counter || !(cb->status & cpu_to_le16(cb_ok))) {
+ DPRINTK(PROBE,ERR, "ucode load failed\n");
+ err = -EPERM;
+ }
+
+ return err;
+}
+
+static void e100_setup_iaaddr(struct nic *nic, struct cb *cb,
+ struct sk_buff *skb)
+{
+ cb->command = cpu_to_le16(cb_iaaddr);
+ memcpy(cb->u.iaaddr, nic->netdev->dev_addr, ETH_ALEN);
+}
+
+static void e100_dump(struct nic *nic, struct cb *cb, struct sk_buff *skb)
+{
+ cb->command = cpu_to_le16(cb_dump);
+ cb->u.dump_buffer_addr = cpu_to_le32(nic->dma_addr +
+ offsetof(struct mem, dump_buf));
+}
+
+#define NCONFIG_AUTO_SWITCH 0x0080
+#define MII_NSC_CONG MII_RESV1
+#define NSC_CONG_ENABLE 0x0100
+#define NSC_CONG_TXREADY 0x0400
+#define ADVERTISE_FC_SUPPORTED 0x0400
+static int e100_phy_init(struct nic *nic)
+{
+ struct net_device *netdev = nic->netdev;
+ u32 addr;
+ u16 bmcr, stat, id_lo, id_hi, cong;
+
+ /* Discover phy addr by searching addrs in order {1,0,2,..., 31} */
+ for(addr = 0; addr < 32; addr++) {
+ nic->mii.phy_id = (addr == 0) ? 1 : (addr == 1) ? 0 : addr;
+ bmcr = mdio_read(netdev, nic->mii.phy_id, MII_BMCR);
+ stat = mdio_read(netdev, nic->mii.phy_id, MII_BMSR);
+ stat = mdio_read(netdev, nic->mii.phy_id, MII_BMSR);
+ if(!((bmcr == 0xFFFF) || ((stat == 0) && (bmcr == 0))))
+ break;
+ }
+ DPRINTK(HW, DEBUG, "phy_addr = %d\n", nic->mii.phy_id);
+ if(addr == 32)
+ return -EAGAIN;
+
+ /* Selected the phy and isolate the rest */
+ for(addr = 0; addr < 32; addr++) {
+ if(addr != nic->mii.phy_id) {
+ mdio_write(netdev, addr, MII_BMCR, BMCR_ISOLATE);
+ } else {
+ bmcr = mdio_read(netdev, addr, MII_BMCR);
+ mdio_write(netdev, addr, MII_BMCR,
+ bmcr & ~BMCR_ISOLATE);
+ }
+ }
+
+ /* Get phy ID */
+ id_lo = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID1);
+ id_hi = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID2);
+ nic->phy = (u32)id_hi << 16 | (u32)id_lo;
+ DPRINTK(HW, DEBUG, "phy ID = 0x%08X\n", nic->phy);
+
+ /* Handle National tx phys */
+#define NCS_PHY_MODEL_MASK 0xFFF0FFFF
+ if((nic->phy & NCS_PHY_MODEL_MASK) == phy_nsc_tx) {
+ /* Disable congestion control */
+ cong = mdio_read(netdev, nic->mii.phy_id, MII_NSC_CONG);
+ cong |= NSC_CONG_TXREADY;
+ cong &= ~NSC_CONG_ENABLE;
+ mdio_write(netdev, nic->mii.phy_id, MII_NSC_CONG, cong);
+ }
+
+ if((nic->mac >= mac_82550_D102) || ((nic->flags & ich) &&
+ (mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000) &&
+ !(nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled))) {
+ /* enable/disable MDI/MDI-X auto-switching. */
+ mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG,
+ nic->mii.force_media ? 0 : NCONFIG_AUTO_SWITCH);
+ }
+
+ return 0;
+}
+
+static int e100_hw_init(struct nic *nic)
+{
+ int err;
+
+ e100_hw_reset(nic);
+
+ DPRINTK(HW, ERR, "e100_hw_init\n");
+ if(!in_interrupt() && (err = e100_self_test(nic)))
+ return err;
+
+ if((err = e100_phy_init(nic)))
+ return err;
+ if((err = e100_exec_cmd(nic, cuc_load_base, 0)))
+ return err;
+ if((err = e100_exec_cmd(nic, ruc_load_base, 0)))
+ return err;
+ if ((err = e100_exec_cb_wait(nic, NULL, e100_setup_ucode)))
+ return err;
+ if((err = e100_exec_cb(nic, NULL, e100_configure)))
+ return err;
+ if((err = e100_exec_cb(nic, NULL, e100_setup_iaaddr)))
+ return err;
+ if((err = e100_exec_cmd(nic, cuc_dump_addr,
+ nic->dma_addr + offsetof(struct mem, stats))))
+ return err;
+ if((err = e100_exec_cmd(nic, cuc_dump_reset, 0)))
+ return err;
+
+ e100_disable_irq(nic);
+
+ return 0;
+}
+
+static void e100_multi(struct nic *nic, struct cb *cb, struct sk_buff *skb)
+{
+ struct net_device *netdev = nic->netdev;
+ struct dev_mc_list *list = netdev->mc_list;
+ u16 i, count = min(netdev->mc_count, E100_MAX_MULTICAST_ADDRS);
+
+ cb->command = cpu_to_le16(cb_multi);
+ cb->u.multi.count = cpu_to_le16(count * ETH_ALEN);
+ for(i = 0; list && i < count; i++, list = list->next)
+ memcpy(&cb->u.multi.addr[i*ETH_ALEN], &list->dmi_addr,
+ ETH_ALEN);
+}
+
+static void e100_set_multicast_list(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ DPRINTK(HW, DEBUG, "mc_count=%d, flags=0x%04X\n",
+ netdev->mc_count, netdev->flags);
+
+ if(netdev->flags & IFF_PROMISC)
+ nic->flags |= promiscuous;
+ else
+ nic->flags &= ~promiscuous;
+
+ if(netdev->flags & IFF_ALLMULTI ||
+ netdev->mc_count > E100_MAX_MULTICAST_ADDRS)
+ nic->flags |= multicast_all;
+ else
+ nic->flags &= ~multicast_all;
+
+ e100_exec_cb(nic, NULL, e100_configure);
+ e100_exec_cb(nic, NULL, e100_multi);
+}
+
+static void e100_update_stats(struct nic *nic)
+{
+ struct net_device *dev = nic->netdev;
+ struct net_device_stats *ns = &dev->stats;
+ struct stats *s = &nic->mem->stats;
+ __le32 *complete = (nic->mac < mac_82558_D101_A4) ? &s->fc_xmt_pause :
+ (nic->mac < mac_82559_D101M) ? (__le32 *)&s->xmt_tco_frames :
+ &s->complete;
+
+ /* Device's stats reporting may take several microseconds to
+ * complete, so we're always waiting for results of the
+ * previous command. */
+
+ if(*complete == cpu_to_le32(cuc_dump_reset_complete)) {
+ *complete = 0;
+ nic->tx_frames = le32_to_cpu(s->tx_good_frames);
+ nic->tx_collisions = le32_to_cpu(s->tx_total_collisions);
+ ns->tx_aborted_errors += le32_to_cpu(s->tx_max_collisions);
+ ns->tx_window_errors += le32_to_cpu(s->tx_late_collisions);
+ ns->tx_carrier_errors += le32_to_cpu(s->tx_lost_crs);
+ ns->tx_fifo_errors += le32_to_cpu(s->tx_underruns);
+ ns->collisions += nic->tx_collisions;
+ ns->tx_errors += le32_to_cpu(s->tx_max_collisions) +
+ le32_to_cpu(s->tx_lost_crs);
+ ns->rx_length_errors += le32_to_cpu(s->rx_short_frame_errors) +
+ nic->rx_over_length_errors;
+ ns->rx_crc_errors += le32_to_cpu(s->rx_crc_errors);
+ ns->rx_frame_errors += le32_to_cpu(s->rx_alignment_errors);
+ ns->rx_over_errors += le32_to_cpu(s->rx_overrun_errors);
+ ns->rx_fifo_errors += le32_to_cpu(s->rx_overrun_errors);
+ ns->rx_missed_errors += le32_to_cpu(s->rx_resource_errors);
+ ns->rx_errors += le32_to_cpu(s->rx_crc_errors) +
+ le32_to_cpu(s->rx_alignment_errors) +
+ le32_to_cpu(s->rx_short_frame_errors) +
+ le32_to_cpu(s->rx_cdt_errors);
+ nic->tx_deferred += le32_to_cpu(s->tx_deferred);
+ nic->tx_single_collisions +=
+ le32_to_cpu(s->tx_single_collisions);
+ nic->tx_multiple_collisions +=
+ le32_to_cpu(s->tx_multiple_collisions);
+ if(nic->mac >= mac_82558_D101_A4) {
+ nic->tx_fc_pause += le32_to_cpu(s->fc_xmt_pause);
+ nic->rx_fc_pause += le32_to_cpu(s->fc_rcv_pause);
+ nic->rx_fc_unsupported +=
+ le32_to_cpu(s->fc_rcv_unsupported);
+ if(nic->mac >= mac_82559_D101M) {
+ nic->tx_tco_frames +=
+ le16_to_cpu(s->xmt_tco_frames);
+ nic->rx_tco_frames +=
+ le16_to_cpu(s->rcv_tco_frames);
+ }
+ }
+ }
+
+
+ if(e100_exec_cmd(nic, cuc_dump_reset, 0))
+ DPRINTK(TX_ERR, DEBUG, "exec cuc_dump_reset failed\n");
+}
+
+static void e100_adjust_adaptive_ifs(struct nic *nic, int speed, int duplex)
+{
+ /* Adjust inter-frame-spacing (IFS) between two transmits if
+ * we're getting collisions on a half-duplex connection. */
+
+ if(duplex == DUPLEX_HALF) {
+ u32 prev = nic->adaptive_ifs;
+ u32 min_frames = (speed == SPEED_100) ? 1000 : 100;
+
+ if((nic->tx_frames / 32 < nic->tx_collisions) &&
+ (nic->tx_frames > min_frames)) {
+ if(nic->adaptive_ifs < 60)
+ nic->adaptive_ifs += 5;
+ } else if (nic->tx_frames < min_frames) {
+ if(nic->adaptive_ifs >= 5)
+ nic->adaptive_ifs -= 5;
+ }
+ if(nic->adaptive_ifs != prev)
+ e100_exec_cb(nic, NULL, e100_configure);
+ }
+}
+
+static void e100_watchdog(unsigned long data)
+{
+ struct nic *nic = (struct nic *)data;
+ struct ethtool_cmd cmd;
+
+ DPRINTK(TIMER, DEBUG, "right now = %ld\n", jiffies);
+
+ /* mii library handles link maintenance tasks */
+
+ if (nic->ecdev) {
+ ecdev_set_link(nic->ecdev, mii_link_ok(&nic->mii) ? 1 : 0);
+ } else {
+ mii_ethtool_gset(&nic->mii, &cmd);
+
+ if(mii_link_ok(&nic->mii) && !netif_carrier_ok(nic->netdev)) {
+ DPRINTK(LINK, INFO, "link up, %sMbps, %s-duplex\n",
+ cmd.speed == SPEED_100 ? "100" : "10",
+ cmd.duplex == DUPLEX_FULL ? "full" : "half");
+ } else if(!mii_link_ok(&nic->mii) && netif_carrier_ok(nic->netdev)) {
+ DPRINTK(LINK, INFO, "link down\n");
+ }
+
+ mii_check_link(&nic->mii);
+
+ /* Software generated interrupt to recover from (rare) Rx
+ * allocation failure.
+ * Unfortunately have to use a spinlock to not re-enable interrupts
+ * accidentally, due to hardware that shares a register between the
+ * interrupt mask bit and the SW Interrupt generation bit */
+ spin_lock_irq(&nic->cmd_lock);
+ iowrite8(ioread8(&nic->csr->scb.cmd_hi) | irq_sw_gen,&nic->csr->scb.cmd_hi);
+ e100_write_flush(nic);
+ spin_unlock_irq(&nic->cmd_lock);
+
+ e100_update_stats(nic);
+ e100_adjust_adaptive_ifs(nic, cmd.speed, cmd.duplex);
+
+ if(nic->mac <= mac_82557_D100_C)
+ /* Issue a multicast command to workaround a 557 lock up */
+ e100_set_multicast_list(nic->netdev);
+
+ if(nic->flags & ich && cmd.speed==SPEED_10 && cmd.duplex==DUPLEX_HALF)
+ /* Need SW workaround for ICH[x] 10Mbps/half duplex Tx hang. */
+ nic->flags |= ich_10h_workaround;
+ else
+ nic->flags &= ~ich_10h_workaround;
+
+ mod_timer(&nic->watchdog,
+ round_jiffies(jiffies + E100_WATCHDOG_PERIOD));
+ }
+}
+
+static void e100_xmit_prepare(struct nic *nic, struct cb *cb,
+ struct sk_buff *skb)
+{
+ cb->command = nic->tx_command;
+ /* interrupt every 16 packets regardless of delay */
+ if((nic->cbs_avail & ~15) == nic->cbs_avail)
+ cb->command |= cpu_to_le16(cb_i);
+ cb->u.tcb.tbd_array = cb->dma_addr + offsetof(struct cb, u.tcb.tbd);
+ cb->u.tcb.tcb_byte_count = 0;
+ cb->u.tcb.threshold = nic->tx_threshold;
+ cb->u.tcb.tbd_count = 1;
+ cb->u.tcb.tbd.buf_addr = cpu_to_le32(pci_map_single(nic->pdev,
+ skb->data, skb->len, PCI_DMA_TODEVICE));
+ /* check for mapping failure? */
+ cb->u.tcb.tbd.size = cpu_to_le16(skb->len);
+}
+
+static int e100_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ int err;
+
+ if(nic->flags & ich_10h_workaround) {
+ /* SW workaround for ICH[x] 10Mbps/half duplex Tx hang.
+ Issue a NOP command followed by a 1us delay before
+ issuing the Tx command. */
+ if(e100_exec_cmd(nic, cuc_nop, 0))
+ DPRINTK(TX_ERR, DEBUG, "exec cuc_nop failed\n");
+ udelay(1);
+ }
+
+ err = e100_exec_cb(nic, skb, e100_xmit_prepare);
+
+ switch(err) {
+ case -ENOSPC:
+ /* We queued the skb, but now we're out of space. */
+ DPRINTK(TX_ERR, DEBUG, "No space for CB\n");
+ if (!nic->ecdev)
+ netif_stop_queue(netdev);
+ break;
+ case -ENOMEM:
+ /* This is a hard error - log it. */
+ DPRINTK(TX_ERR, DEBUG, "Out of Tx resources, returning skb\n");
+ if (!nic->ecdev)
+ netif_stop_queue(netdev);
+ return 1;
+ }
+
+ netdev->trans_start = jiffies;
+ return 0;
+}
+
+static int e100_tx_clean(struct nic *nic)
+{
+ struct net_device *dev = nic->netdev;
+ struct cb *cb;
+ int tx_cleaned = 0;
+
+ if (!nic->ecdev)
+ spin_lock(&nic->cb_lock);
+
+ /* Clean CBs marked complete */
+ for(cb = nic->cb_to_clean;
+ cb->status & cpu_to_le16(cb_complete);
+ cb = nic->cb_to_clean = cb->next) {
+ DPRINTK(TX_DONE, DEBUG, "cb[%d]->status = 0x%04X\n",
+ (int)(((void*)cb - (void*)nic->cbs)/sizeof(struct cb)),
+ cb->status);
+
+ if(likely(cb->skb != NULL)) {
+ dev->stats.tx_packets++;
+ dev->stats.tx_bytes += cb->skb->len;
+
+ pci_unmap_single(nic->pdev,
+ le32_to_cpu(cb->u.tcb.tbd.buf_addr),
+ le16_to_cpu(cb->u.tcb.tbd.size),
+ PCI_DMA_TODEVICE);
+ if (!nic->ecdev)
+ dev_kfree_skb_any(cb->skb);
+ cb->skb = NULL;
+ tx_cleaned = 1;
+ }
+ cb->status = 0;
+ nic->cbs_avail++;
+ }
+
+ if (!nic->ecdev) {
+ spin_unlock(&nic->cb_lock);
+
+ /* Recover from running out of Tx resources in xmit_frame */
+ if(unlikely(tx_cleaned && netif_queue_stopped(nic->netdev)))
+ netif_wake_queue(nic->netdev);
+ }
+
+ return tx_cleaned;
+}
+
+static void e100_clean_cbs(struct nic *nic)
+{
+ if(nic->cbs) {
+ while(nic->cbs_avail != nic->params.cbs.count) {
+ struct cb *cb = nic->cb_to_clean;
+ if(cb->skb) {
+ pci_unmap_single(nic->pdev,
+ le32_to_cpu(cb->u.tcb.tbd.buf_addr),
+ le16_to_cpu(cb->u.tcb.tbd.size),
+ PCI_DMA_TODEVICE);
+ if (!nic->ecdev)
+ dev_kfree_skb(cb->skb);
+ }
+ nic->cb_to_clean = nic->cb_to_clean->next;
+ nic->cbs_avail++;
+ }
+ pci_free_consistent(nic->pdev,
+ sizeof(struct cb) * nic->params.cbs.count,
+ nic->cbs, nic->cbs_dma_addr);
+ nic->cbs = NULL;
+ nic->cbs_avail = 0;
+ }
+ nic->cuc_cmd = cuc_start;
+ nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean =
+ nic->cbs;
+}
+
+static int e100_alloc_cbs(struct nic *nic)
+{
+ struct cb *cb;
+ unsigned int i, count = nic->params.cbs.count;
+
+ nic->cuc_cmd = cuc_start;
+ nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean = NULL;
+ nic->cbs_avail = 0;
+
+ nic->cbs = pci_alloc_consistent(nic->pdev,
+ sizeof(struct cb) * count, &nic->cbs_dma_addr);
+ if(!nic->cbs)
+ return -ENOMEM;
+
+ for(cb = nic->cbs, i = 0; i < count; cb++, i++) {
+ cb->next = (i + 1 < count) ? cb + 1 : nic->cbs;
+ cb->prev = (i == 0) ? nic->cbs + count - 1 : cb - 1;
+
+ cb->dma_addr = nic->cbs_dma_addr + i * sizeof(struct cb);
+ cb->link = cpu_to_le32(nic->cbs_dma_addr +
+ ((i+1) % count) * sizeof(struct cb));
+ cb->skb = NULL;
+ }
+
+ nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean = nic->cbs;
+ nic->cbs_avail = count;
+
+ return 0;
+}
+
+static inline void e100_start_receiver(struct nic *nic, struct rx *rx)
+{
+ if(!nic->rxs) return;
+ if(RU_SUSPENDED != nic->ru_running) return;
+
+ /* handle init time starts */
+ if(!rx) rx = nic->rxs;
+
+ /* (Re)start RU if suspended or idle and RFA is non-NULL */
+ if(rx->skb) {
+ e100_exec_cmd(nic, ruc_start, rx->dma_addr);
+ nic->ru_running = RU_RUNNING;
+ }
+}
+
+#define RFD_BUF_LEN (sizeof(struct rfd) + VLAN_ETH_FRAME_LEN)
+static int e100_rx_alloc_skb(struct nic *nic, struct rx *rx)
+{
+ if(!(rx->skb = netdev_alloc_skb(nic->netdev, RFD_BUF_LEN + NET_IP_ALIGN)))
+ return -ENOMEM;
+
+ /* Align, init, and map the RFD. */
+ skb_reserve(rx->skb, NET_IP_ALIGN);
+ skb_copy_to_linear_data(rx->skb, &nic->blank_rfd, sizeof(struct rfd));
+ rx->dma_addr = pci_map_single(nic->pdev, rx->skb->data,
+ RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
+
+ if (pci_dma_mapping_error(nic->pdev, rx->dma_addr)) {
+ dev_kfree_skb_any(rx->skb);
+ rx->skb = NULL;
+ rx->dma_addr = 0;
+ return -ENOMEM;
+ }
+
+ /* Link the RFD to end of RFA by linking previous RFD to
+ * this one. We are safe to touch the previous RFD because
+ * it is protected by the before last buffer's el bit being set */
+ if (rx->prev->skb) {
+ struct rfd *prev_rfd = (struct rfd *)rx->prev->skb->data;
+ put_unaligned_le32(rx->dma_addr, &prev_rfd->link);
+ pci_dma_sync_single_for_device(nic->pdev, rx->prev->dma_addr,
+ sizeof(struct rfd), PCI_DMA_TODEVICE);
+ }
+
+ return 0;
+}
+
+static int e100_rx_indicate(struct nic *nic, struct rx *rx,
+ unsigned int *work_done, unsigned int work_to_do)
+{
+ struct net_device *dev = nic->netdev;
+ struct sk_buff *skb = rx->skb;
+ struct rfd *rfd = (struct rfd *)skb->data;
+ u16 rfd_status, actual_size;
+
+ if(unlikely(work_done && *work_done >= work_to_do))
+ return -EAGAIN;
+
+ /* Need to sync before taking a peek at cb_complete bit */
+ pci_dma_sync_single_for_cpu(nic->pdev, rx->dma_addr,
+ sizeof(struct rfd), PCI_DMA_FROMDEVICE);
+ rfd_status = le16_to_cpu(rfd->status);
+
+ DPRINTK(RX_STATUS, DEBUG, "status=0x%04X\n", rfd_status);
+
+ /* If data isn't ready, nothing to indicate */
+ if (unlikely(!(rfd_status & cb_complete))) {
+ /* If the next buffer has the el bit, but we think the receiver
+ * is still running, check to see if it really stopped while
+ * we had interrupts off.
+ * This allows for a fast restart without re-enabling
+ * interrupts */
+ if ((le16_to_cpu(rfd->command) & cb_el) &&
+ (RU_RUNNING == nic->ru_running))
+
+ if (ioread8(&nic->csr->scb.status) & rus_no_res)
+ nic->ru_running = RU_SUSPENDED;
+ pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr,
+ sizeof(struct rfd),
+ PCI_DMA_BIDIRECTIONAL);
+ return -ENODATA;
+ }
+
+ /* Get actual data size */
+ actual_size = le16_to_cpu(rfd->actual_size) & 0x3FFF;
+ if(unlikely(actual_size > RFD_BUF_LEN - sizeof(struct rfd)))
+ actual_size = RFD_BUF_LEN - sizeof(struct rfd);
+
+ /* Get data */
+ pci_unmap_single(nic->pdev, rx->dma_addr,
+ RFD_BUF_LEN, PCI_DMA_FROMDEVICE);
+
+ /* If this buffer has the el bit, but we think the receiver
+ * is still running, check to see if it really stopped while
+ * we had interrupts off.
+ * This allows for a fast restart without re-enabling interrupts.
+ * This can happen when the RU sees the size change but also sees
+ * the el bit set. */
+ if ((le16_to_cpu(rfd->command) & cb_el) &&
+ (RU_RUNNING == nic->ru_running)) {
+
+ if (ioread8(&nic->csr->scb.status) & rus_no_res)
+ nic->ru_running = RU_SUSPENDED;
+ }
+
+ if (!nic->ecdev) {
+ /* Pull off the RFD and put the actual data (minus eth hdr) */
+ skb_reserve(skb, sizeof(struct rfd));
+ skb_put(skb, actual_size);
+ skb->protocol = eth_type_trans(skb, nic->netdev);
+ }
+
+ if(unlikely(!(rfd_status & cb_ok))) {
+ if (!nic->ecdev) {
+ /* Don't indicate if hardware indicates errors */
+ dev_kfree_skb_any(skb);
+ }
+ } else if(actual_size > ETH_DATA_LEN + VLAN_ETH_HLEN) {
+ /* Don't indicate oversized frames */
+ nic->rx_over_length_errors++;
+ if (!nic->ecdev)
+ dev_kfree_skb_any(skb);
+ } else {
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += actual_size;
+ nic->netdev->last_rx = jiffies;
+ if (nic->ecdev) {
+ ecdev_receive(nic->ecdev,
+ skb->data + sizeof(struct rfd), actual_size);
+
+ // No need to detect link status as
+ // long as frames are received: Reset watchdog.
+ nic->ec_watchdog_jiffies = jiffies;
+ } else {
+ netif_receive_skb(skb);
+ }
+ if(work_done)
+ (*work_done)++;
+ }
+
+ if (nic->ecdev) {
+ // make receive frame descriptior usable again
+ memcpy(skb->data, &nic->blank_rfd, sizeof(struct rfd));
+ rx->dma_addr = pci_map_single(nic->pdev, skb->data,
+ RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
+ if (pci_dma_mapping_error(nic->pdev, rx->dma_addr)) {
+ rx->dma_addr = 0;
+ }
+
+ /* Link the RFD to end of RFA by linking previous RFD to
+ * this one. We are safe to touch the previous RFD because
+ * it is protected by the before last buffer's el bit being set */
+ if (rx->prev->skb) {
+ struct rfd *prev_rfd = (struct rfd *)rx->prev->skb->data;
+ put_unaligned_le32(rx->dma_addr, &prev_rfd->link);
+ pci_dma_sync_single_for_device(nic->pdev, rx->prev->dma_addr,
+ sizeof(struct rfd), PCI_DMA_TODEVICE);
+ }
+ } else {
+ rx->skb = NULL;
+ }
+
+ return 0;
+}
+
+static void e100_rx_clean(struct nic *nic, unsigned int *work_done,
+ unsigned int work_to_do)
+{
+ struct rx *rx;
+ int restart_required = 0, err = 0;
+ struct rx *old_before_last_rx, *new_before_last_rx;
+ struct rfd *old_before_last_rfd, *new_before_last_rfd;
+
+ /* Indicate newly arrived packets */
+ for(rx = nic->rx_to_clean; rx->skb; rx = nic->rx_to_clean = rx->next) {
+ err = e100_rx_indicate(nic, rx, work_done, work_to_do);
+ /* Hit quota or no more to clean */
+ if (-EAGAIN == err || -ENODATA == err)
+ break;
+ }
+
+
+ /* On EAGAIN, hit quota so have more work to do, restart once
+ * cleanup is complete.
+ * Else, are we already rnr? then pay attention!!! this ensures that
+ * the state machine progression never allows a start with a
+ * partially cleaned list, avoiding a race between hardware
+ * and rx_to_clean when in NAPI mode */
+ if (-EAGAIN != err && RU_SUSPENDED == nic->ru_running)
+ restart_required = 1;
+
+ old_before_last_rx = nic->rx_to_use->prev->prev;
+ old_before_last_rfd = (struct rfd *)old_before_last_rx->skb->data;
+
+ if (!nic->ecdev) {
+ /* Alloc new skbs to refill list */
+ for(rx = nic->rx_to_use; !rx->skb; rx = nic->rx_to_use = rx->next) {
+ if(unlikely(e100_rx_alloc_skb(nic, rx)))
+ break; /* Better luck next time (see watchdog) */
+ }
+ }
+
+ new_before_last_rx = nic->rx_to_use->prev->prev;
+ if (new_before_last_rx != old_before_last_rx) {
+ /* Set the el-bit on the buffer that is before the last buffer.
+ * This lets us update the next pointer on the last buffer
+ * without worrying about hardware touching it.
+ * We set the size to 0 to prevent hardware from touching this
+ * buffer.
+ * When the hardware hits the before last buffer with el-bit
+ * and size of 0, it will RNR interrupt, the RUS will go into
+ * the No Resources state. It will not complete nor write to
+ * this buffer. */
+ new_before_last_rfd =
+ (struct rfd *)new_before_last_rx->skb->data;
+ new_before_last_rfd->size = 0;
+ new_before_last_rfd->command |= cpu_to_le16(cb_el);
+ pci_dma_sync_single_for_device(nic->pdev,
+ new_before_last_rx->dma_addr, sizeof(struct rfd),
+ PCI_DMA_TODEVICE);
+
+ /* Now that we have a new stopping point, we can clear the old
+ * stopping point. We must sync twice to get the proper
+ * ordering on the hardware side of things. */
+ old_before_last_rfd->command &= ~cpu_to_le16(cb_el);
+ pci_dma_sync_single_for_device(nic->pdev,
+ old_before_last_rx->dma_addr, sizeof(struct rfd),
+ PCI_DMA_TODEVICE);
+ old_before_last_rfd->size = cpu_to_le16(VLAN_ETH_FRAME_LEN);
+ pci_dma_sync_single_for_device(nic->pdev,
+ old_before_last_rx->dma_addr, sizeof(struct rfd),
+ PCI_DMA_TODEVICE);
+ }
+
+ if(restart_required) {
+ // ack the rnr?
+ iowrite8(stat_ack_rnr, &nic->csr->scb.stat_ack);
+ e100_start_receiver(nic, nic->rx_to_clean);
+ if(work_done)
+ (*work_done)++;
+ }
+}
+
+static void e100_rx_clean_list(struct nic *nic)
+{
+ struct rx *rx;
+ unsigned int i, count = nic->params.rfds.count;
+
+ nic->ru_running = RU_UNINITIALIZED;
+
+ if(nic->rxs) {
+ for(rx = nic->rxs, i = 0; i < count; rx++, i++) {
+ if(rx->skb) {
+ pci_unmap_single(nic->pdev, rx->dma_addr,
+ RFD_BUF_LEN, PCI_DMA_FROMDEVICE);
+ dev_kfree_skb(rx->skb);
+ }
+ }
+ kfree(nic->rxs);
+ nic->rxs = NULL;
+ }
+
+ nic->rx_to_use = nic->rx_to_clean = NULL;
+}
+
+static int e100_rx_alloc_list(struct nic *nic)
+{
+ struct rx *rx;
+ unsigned int i, count = nic->params.rfds.count;
+ struct rfd *before_last;
+
+ nic->rx_to_use = nic->rx_to_clean = NULL;
+ nic->ru_running = RU_UNINITIALIZED;
+
+ if(!(nic->rxs = kcalloc(count, sizeof(struct rx), GFP_ATOMIC)))
+ return -ENOMEM;
+
+ for(rx = nic->rxs, i = 0; i < count; rx++, i++) {
+ rx->next = (i + 1 < count) ? rx + 1 : nic->rxs;
+ rx->prev = (i == 0) ? nic->rxs + count - 1 : rx - 1;
+ if(e100_rx_alloc_skb(nic, rx)) {
+ e100_rx_clean_list(nic);
+ return -ENOMEM;
+ }
+ }
+
+ if (!nic->ecdev) {
+ /* Set the el-bit on the buffer that is before the last buffer.
+ * This lets us update the next pointer on the last buffer without
+ * worrying about hardware touching it.
+ * We set the size to 0 to prevent hardware from touching this buffer.
+ * When the hardware hits the before last buffer with el-bit and size
+ * of 0, it will RNR interrupt, the RU will go into the No Resources
+ * state. It will not complete nor write to this buffer. */
+ rx = nic->rxs->prev->prev;
+ before_last = (struct rfd *)rx->skb->data;
+ before_last->command |= cpu_to_le16(cb_el);
+ before_last->size = 0;
+ pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr,
+ sizeof(struct rfd), PCI_DMA_TODEVICE);
+ }
+
+ nic->rx_to_use = nic->rx_to_clean = nic->rxs;
+ nic->ru_running = RU_SUSPENDED;
+
+ return 0;
+}
+
+static irqreturn_t e100_intr(int irq, void *dev_id)
+{
+ struct net_device *netdev = dev_id;
+ struct nic *nic = netdev_priv(netdev);
+ u8 stat_ack = ioread8(&nic->csr->scb.stat_ack);
+
+ DPRINTK(INTR, DEBUG, "stat_ack = 0x%02X\n", stat_ack);
+
+ if(stat_ack == stat_ack_not_ours || /* Not our interrupt */
+ stat_ack == stat_ack_not_present) /* Hardware is ejected */
+ return IRQ_NONE;
+
+ /* Ack interrupt(s) */
+ iowrite8(stat_ack, &nic->csr->scb.stat_ack);
+
+ /* We hit Receive No Resource (RNR); restart RU after cleaning */
+ if(stat_ack & stat_ack_rnr)
+ nic->ru_running = RU_SUSPENDED;
+
+ if(!nic->ecdev && likely(netif_rx_schedule_prep(netdev, &nic->napi))) {
+ e100_disable_irq(nic);
+ __netif_rx_schedule(netdev, &nic->napi);
+ }
+
+ return IRQ_HANDLED;
+}
+
+void e100_ec_poll(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ e100_rx_clean(nic, NULL, 100);
+ e100_tx_clean(nic);
+
+ if (jiffies - nic->ec_watchdog_jiffies >= 2 * HZ) {
+ e100_watchdog((unsigned long) nic);
+ nic->ec_watchdog_jiffies = jiffies;
+ }
+}
+
+
+static int e100_poll(struct napi_struct *napi, int budget)
+{
+ struct nic *nic = container_of(napi, struct nic, napi);
+ struct net_device *netdev = nic->netdev;
+ unsigned int work_done = 0;
+
+ e100_rx_clean(nic, &work_done, budget);
+ e100_tx_clean(nic);
+
+ /* If budget not fully consumed, exit the polling mode */
+ if (work_done < budget) {
+ netif_rx_complete(netdev, napi);
+ e100_enable_irq(nic);
+ }
+
+ return work_done;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void e100_netpoll(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ e100_disable_irq(nic);
+ e100_intr(nic->pdev->irq, netdev);
+ e100_tx_clean(nic);
+ e100_enable_irq(nic);
+}
+#endif
+
+static int e100_set_mac_address(struct net_device *netdev, void *p)
+{
+ struct nic *nic = netdev_priv(netdev);
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+ e100_exec_cb(nic, NULL, e100_setup_iaaddr);
+
+ return 0;
+}
+
+static int e100_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ if(new_mtu < ETH_ZLEN || new_mtu > ETH_DATA_LEN)
+ return -EINVAL;
+ netdev->mtu = new_mtu;
+ return 0;
+}
+
+static int e100_asf(struct nic *nic)
+{
+ /* ASF can be enabled from eeprom */
+ return((nic->pdev->device >= 0x1050) && (nic->pdev->device <= 0x1057) &&
+ (nic->eeprom[eeprom_config_asf] & eeprom_asf) &&
+ !(nic->eeprom[eeprom_config_asf] & eeprom_gcl) &&
+ ((nic->eeprom[eeprom_smbus_addr] & 0xFF) != 0xFE));
+}
+
+static int e100_up(struct nic *nic)
+{
+ int err;
+
+ if((err = e100_rx_alloc_list(nic)))
+ return err;
+ if((err = e100_alloc_cbs(nic)))
+ goto err_rx_clean_list;
+ if((err = e100_hw_init(nic)))
+ goto err_clean_cbs;
+ e100_set_multicast_list(nic->netdev);
+ e100_start_receiver(nic, NULL);
+ if (!nic->ecdev) {
+ mod_timer(&nic->watchdog, jiffies);
+ }
+ if((err = request_irq(nic->pdev->irq, e100_intr, IRQF_SHARED,
+ nic->netdev->name, nic->netdev)))
+ goto err_no_irq;
+ if (!nic->ecdev) {
+ netif_wake_queue(nic->netdev);
+ napi_enable(&nic->napi);
+ /* enable ints _after_ enabling poll, preventing a race between
+ * disable ints+schedule */
+ e100_enable_irq(nic);
+ }
+ return 0;
+
+err_no_irq:
+ if (!nic->ecdev)
+ del_timer_sync(&nic->watchdog);
+err_clean_cbs:
+ e100_clean_cbs(nic);
+err_rx_clean_list:
+ e100_rx_clean_list(nic);
+ return err;
+}
+
+static void e100_down(struct nic *nic)
+{
+ if (!nic->ecdev) {
+ /* wait here for poll to complete */
+ napi_disable(&nic->napi);
+ netif_stop_queue(nic->netdev);
+ }
+ e100_hw_reset(nic);
+ free_irq(nic->pdev->irq, nic->netdev);
+ if (!nic->ecdev) {
+ del_timer_sync(&nic->watchdog);
+ netif_carrier_off(nic->netdev);
+ }
+ e100_clean_cbs(nic);
+ e100_rx_clean_list(nic);
+}
+
+static void e100_tx_timeout(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ /* Reset outside of interrupt context, to avoid request_irq
+ * in interrupt context */
+ schedule_work(&nic->tx_timeout_task);
+}
+
+static void e100_tx_timeout_task(struct work_struct *work)
+{
+ struct nic *nic = container_of(work, struct nic, tx_timeout_task);
+ struct net_device *netdev = nic->netdev;
+
+ DPRINTK(TX_ERR, DEBUG, "scb.status=0x%02X\n",
+ ioread8(&nic->csr->scb.status));
+ e100_down(netdev_priv(netdev));
+ e100_up(netdev_priv(netdev));
+}
+
+static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode)
+{
+ int err;
+ struct sk_buff *skb;
+
+ /* Use driver resources to perform internal MAC or PHY
+ * loopback test. A single packet is prepared and transmitted
+ * in loopback mode, and the test passes if the received
+ * packet compares byte-for-byte to the transmitted packet. */
+
+ if((err = e100_rx_alloc_list(nic)))
+ return err;
+ if((err = e100_alloc_cbs(nic)))
+ goto err_clean_rx;
+
+ /* ICH PHY loopback is broken so do MAC loopback instead */
+ if(nic->flags & ich && loopback_mode == lb_phy)
+ loopback_mode = lb_mac;
+
+ nic->loopback = loopback_mode;
+ if((err = e100_hw_init(nic)))
+ goto err_loopback_none;
+
+ if(loopback_mode == lb_phy)
+ mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR,
+ BMCR_LOOPBACK);
+
+ e100_start_receiver(nic, NULL);
+
+ if(!(skb = netdev_alloc_skb(nic->netdev, ETH_DATA_LEN))) {
+ err = -ENOMEM;
+ goto err_loopback_none;
+ }
+ skb_put(skb, ETH_DATA_LEN);
+ memset(skb->data, 0xFF, ETH_DATA_LEN);
+ e100_xmit_frame(skb, nic->netdev);
+
+ msleep(10);
+
+ pci_dma_sync_single_for_cpu(nic->pdev, nic->rx_to_clean->dma_addr,
+ RFD_BUF_LEN, PCI_DMA_FROMDEVICE);
+
+ if(memcmp(nic->rx_to_clean->skb->data + sizeof(struct rfd),
+ skb->data, ETH_DATA_LEN))
+ err = -EAGAIN;
+
+err_loopback_none:
+ mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR, 0);
+ nic->loopback = lb_none;
+ e100_clean_cbs(nic);
+ e100_hw_reset(nic);
+err_clean_rx:
+ e100_rx_clean_list(nic);
+ return err;
+}
+
+#define MII_LED_CONTROL 0x1B
+static void e100_blink_led(unsigned long data)
+{
+ struct nic *nic = (struct nic *)data;
+ enum led_state {
+ led_on = 0x01,
+ led_off = 0x04,
+ led_on_559 = 0x05,
+ led_on_557 = 0x07,
+ };
+
+ nic->leds = (nic->leds & led_on) ? led_off :
+ (nic->mac < mac_82559_D101M) ? led_on_557 : led_on_559;
+ mdio_write(nic->netdev, nic->mii.phy_id, MII_LED_CONTROL, nic->leds);
+ mod_timer(&nic->blink_timer, jiffies + HZ / 4);
+}
+
+static int e100_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return mii_ethtool_gset(&nic->mii, cmd);
+}
+
+static int e100_set_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
+{
+ struct nic *nic = netdev_priv(netdev);
+ int err;
+
+ mdio_write(netdev, nic->mii.phy_id, MII_BMCR, BMCR_RESET);
+ err = mii_ethtool_sset(&nic->mii, cmd);
+ e100_exec_cb(nic, NULL, e100_configure);
+
+ return err;
+}
+
+static void e100_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *info)
+{
+ struct nic *nic = netdev_priv(netdev);
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->fw_version, "N/A");
+ strcpy(info->bus_info, pci_name(nic->pdev));
+}
+
+#define E100_PHY_REGS 0x1C
+static int e100_get_regs_len(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return 1 + E100_PHY_REGS + sizeof(nic->mem->dump_buf);
+}
+
+static void e100_get_regs(struct net_device *netdev,
+ struct ethtool_regs *regs, void *p)
+{
+ struct nic *nic = netdev_priv(netdev);
+ u32 *buff = p;
+ int i;
+
+ regs->version = (1 << 24) | nic->pdev->revision;
+ buff[0] = ioread8(&nic->csr->scb.cmd_hi) << 24 |
+ ioread8(&nic->csr->scb.cmd_lo) << 16 |
+ ioread16(&nic->csr->scb.status);
+ for(i = E100_PHY_REGS; i >= 0; i--)
+ buff[1 + E100_PHY_REGS - i] =
+ mdio_read(netdev, nic->mii.phy_id, i);
+ memset(nic->mem->dump_buf, 0, sizeof(nic->mem->dump_buf));
+ e100_exec_cb(nic, NULL, e100_dump);
+ msleep(10);
+ memcpy(&buff[2 + E100_PHY_REGS], nic->mem->dump_buf,
+ sizeof(nic->mem->dump_buf));
+}
+
+static void e100_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+ struct nic *nic = netdev_priv(netdev);
+ wol->supported = (nic->mac >= mac_82558_D101_A4) ? WAKE_MAGIC : 0;
+ wol->wolopts = (nic->flags & wol_magic) ? WAKE_MAGIC : 0;
+}
+
+static int e100_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ if ((wol->wolopts && wol->wolopts != WAKE_MAGIC) ||
+ !device_can_wakeup(&nic->pdev->dev))
+ return -EOPNOTSUPP;
+
+ if(wol->wolopts)
+ nic->flags |= wol_magic;
+ else
+ nic->flags &= ~wol_magic;
+
+ device_set_wakeup_enable(&nic->pdev->dev, wol->wolopts);
+
+ e100_exec_cb(nic, NULL, e100_configure);
+
+ return 0;
+}
+
+static u32 e100_get_msglevel(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return nic->msg_enable;
+}
+
+static void e100_set_msglevel(struct net_device *netdev, u32 value)
+{
+ struct nic *nic = netdev_priv(netdev);
+ nic->msg_enable = value;
+}
+
+static int e100_nway_reset(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return mii_nway_restart(&nic->mii);
+}
+
+static u32 e100_get_link(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return mii_link_ok(&nic->mii);
+}
+
+static int e100_get_eeprom_len(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return nic->eeprom_wc << 1;
+}
+
+#define E100_EEPROM_MAGIC 0x1234
+static int e100_get_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ eeprom->magic = E100_EEPROM_MAGIC;
+ memcpy(bytes, &((u8 *)nic->eeprom)[eeprom->offset], eeprom->len);
+
+ return 0;
+}
+
+static int e100_set_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ if(eeprom->magic != E100_EEPROM_MAGIC)
+ return -EINVAL;
+
+ memcpy(&((u8 *)nic->eeprom)[eeprom->offset], bytes, eeprom->len);
+
+ return e100_eeprom_save(nic, eeprom->offset >> 1,
+ (eeprom->len >> 1) + 1);
+}
+
+static void e100_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct nic *nic = netdev_priv(netdev);
+ struct param_range *rfds = &nic->params.rfds;
+ struct param_range *cbs = &nic->params.cbs;
+
+ ring->rx_max_pending = rfds->max;
+ ring->tx_max_pending = cbs->max;
+ ring->rx_mini_max_pending = 0;
+ ring->rx_jumbo_max_pending = 0;
+ ring->rx_pending = rfds->count;
+ ring->tx_pending = cbs->count;
+ ring->rx_mini_pending = 0;
+ ring->rx_jumbo_pending = 0;
+}
+
+static int e100_set_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct nic *nic = netdev_priv(netdev);
+ struct param_range *rfds = &nic->params.rfds;
+ struct param_range *cbs = &nic->params.cbs;
+
+ if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+ return -EINVAL;
+
+ if(netif_running(netdev))
+ e100_down(nic);
+ rfds->count = max(ring->rx_pending, rfds->min);
+ rfds->count = min(rfds->count, rfds->max);
+ cbs->count = max(ring->tx_pending, cbs->min);
+ cbs->count = min(cbs->count, cbs->max);
+ DPRINTK(DRV, INFO, "Ring Param settings: rx: %d, tx %d\n",
+ rfds->count, cbs->count);
+ if(netif_running(netdev))
+ e100_up(nic);
+
+ return 0;
+}
+
+static const char e100_gstrings_test[][ETH_GSTRING_LEN] = {
+ "Link test (on/offline)",
+ "Eeprom test (on/offline)",
+ "Self test (offline)",
+ "Mac loopback (offline)",
+ "Phy loopback (offline)",
+};
+#define E100_TEST_LEN ARRAY_SIZE(e100_gstrings_test)
+
+static void e100_diag_test(struct net_device *netdev,
+ struct ethtool_test *test, u64 *data)
+{
+ struct ethtool_cmd cmd;
+ struct nic *nic = netdev_priv(netdev);
+ int i, err;
+
+ memset(data, 0, E100_TEST_LEN * sizeof(u64));
+ data[0] = !mii_link_ok(&nic->mii);
+ data[1] = e100_eeprom_load(nic);
+ if(test->flags & ETH_TEST_FL_OFFLINE) {
+
+ /* save speed, duplex & autoneg settings */
+ err = mii_ethtool_gset(&nic->mii, &cmd);
+
+ if(netif_running(netdev))
+ e100_down(nic);
+ data[2] = e100_self_test(nic);
+ data[3] = e100_loopback_test(nic, lb_mac);
+ data[4] = e100_loopback_test(nic, lb_phy);
+
+ /* restore speed, duplex & autoneg settings */
+ err = mii_ethtool_sset(&nic->mii, &cmd);
+
+ if(netif_running(netdev))
+ e100_up(nic);
+ }
+ for(i = 0; i < E100_TEST_LEN; i++)
+ test->flags |= data[i] ? ETH_TEST_FL_FAILED : 0;
+
+ msleep_interruptible(4 * 1000);
+}
+
+static int e100_phys_id(struct net_device *netdev, u32 data)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ if(!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ))
+ data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ);
+ mod_timer(&nic->blink_timer, jiffies);
+ msleep_interruptible(data * 1000);
+ del_timer_sync(&nic->blink_timer);
+ mdio_write(netdev, nic->mii.phy_id, MII_LED_CONTROL, 0);
+
+ return 0;
+}
+
+static const char e100_gstrings_stats[][ETH_GSTRING_LEN] = {
+ "rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors",
+ "tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions",
+ "rx_length_errors", "rx_over_errors", "rx_crc_errors",
+ "rx_frame_errors", "rx_fifo_errors", "rx_missed_errors",
+ "tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors",
+ "tx_heartbeat_errors", "tx_window_errors",
+ /* device-specific stats */
+ "tx_deferred", "tx_single_collisions", "tx_multi_collisions",
+ "tx_flow_control_pause", "rx_flow_control_pause",
+ "rx_flow_control_unsupported", "tx_tco_packets", "rx_tco_packets",
+};
+#define E100_NET_STATS_LEN 21
+#define E100_STATS_LEN ARRAY_SIZE(e100_gstrings_stats)
+
+static int e100_get_sset_count(struct net_device *netdev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_TEST:
+ return E100_TEST_LEN;
+ case ETH_SS_STATS:
+ return E100_STATS_LEN;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void e100_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct nic *nic = netdev_priv(netdev);
+ int i;
+
+ for(i = 0; i < E100_NET_STATS_LEN; i++)
+ data[i] = ((unsigned long *)&netdev->stats)[i];
+
+ data[i++] = nic->tx_deferred;
+ data[i++] = nic->tx_single_collisions;
+ data[i++] = nic->tx_multiple_collisions;
+ data[i++] = nic->tx_fc_pause;
+ data[i++] = nic->rx_fc_pause;
+ data[i++] = nic->rx_fc_unsupported;
+ data[i++] = nic->tx_tco_frames;
+ data[i++] = nic->rx_tco_frames;
+}
+
+static void e100_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
+{
+ switch(stringset) {
+ case ETH_SS_TEST:
+ memcpy(data, *e100_gstrings_test, sizeof(e100_gstrings_test));
+ break;
+ case ETH_SS_STATS:
+ memcpy(data, *e100_gstrings_stats, sizeof(e100_gstrings_stats));
+ break;
+ }
+}
+
+static const struct ethtool_ops e100_ethtool_ops = {
+ .get_settings = e100_get_settings,
+ .set_settings = e100_set_settings,
+ .get_drvinfo = e100_get_drvinfo,
+ .get_regs_len = e100_get_regs_len,
+ .get_regs = e100_get_regs,
+ .get_wol = e100_get_wol,
+ .set_wol = e100_set_wol,
+ .get_msglevel = e100_get_msglevel,
+ .set_msglevel = e100_set_msglevel,
+ .nway_reset = e100_nway_reset,
+ .get_link = e100_get_link,
+ .get_eeprom_len = e100_get_eeprom_len,
+ .get_eeprom = e100_get_eeprom,
+ .set_eeprom = e100_set_eeprom,
+ .get_ringparam = e100_get_ringparam,
+ .set_ringparam = e100_set_ringparam,
+ .self_test = e100_diag_test,
+ .get_strings = e100_get_strings,
+ .phys_id = e100_phys_id,
+ .get_ethtool_stats = e100_get_ethtool_stats,
+ .get_sset_count = e100_get_sset_count,
+};
+
+static int e100_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ return generic_mii_ioctl(&nic->mii, if_mii(ifr), cmd, NULL);
+}
+
+static int e100_alloc(struct nic *nic)
+{
+ nic->mem = pci_alloc_consistent(nic->pdev, sizeof(struct mem),
+ &nic->dma_addr);
+ return nic->mem ? 0 : -ENOMEM;
+}
+
+static void e100_free(struct nic *nic)
+{
+ if(nic->mem) {
+ pci_free_consistent(nic->pdev, sizeof(struct mem),
+ nic->mem, nic->dma_addr);
+ nic->mem = NULL;
+ }
+}
+
+static int e100_open(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ int err = 0;
+
+ if (!nic->ecdev)
+ netif_carrier_off(netdev);
+ if((err = e100_up(nic)))
+ DPRINTK(IFUP, ERR, "Cannot open interface, aborting.\n");
+ return err;
+}
+
+static int e100_close(struct net_device *netdev)
+{
+ e100_down(netdev_priv(netdev));
+ return 0;
+}
+
+static int __devinit e100_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *netdev;
+ struct nic *nic;
+ int err;
+ DECLARE_MAC_BUF(mac);
+
+ if(!(netdev = alloc_etherdev(sizeof(struct nic)))) {
+ if(((1 << debug) - 1) & NETIF_MSG_PROBE)
+ printk(KERN_ERR PFX "Etherdev alloc failed, abort.\n");
+ return -ENOMEM;
+ }
+
+ netdev->open = e100_open;
+ netdev->stop = e100_close;
+ netdev->hard_start_xmit = e100_xmit_frame;
+ netdev->set_multicast_list = e100_set_multicast_list;
+ netdev->set_mac_address = e100_set_mac_address;
+ netdev->change_mtu = e100_change_mtu;
+ netdev->do_ioctl = e100_do_ioctl;
+ SET_ETHTOOL_OPS(netdev, &e100_ethtool_ops);
+ netdev->tx_timeout = e100_tx_timeout;
+ netdev->watchdog_timeo = E100_WATCHDOG_PERIOD;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ netdev->poll_controller = e100_netpoll;
+#endif
+ strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
+
+ nic = netdev_priv(netdev);
+ netif_napi_add(netdev, &nic->napi, e100_poll, E100_NAPI_WEIGHT);
+ nic->netdev = netdev;
+ nic->pdev = pdev;
+ nic->msg_enable = (1 << debug) - 1;
+ pci_set_drvdata(pdev, netdev);
+
+ if((err = pci_enable_device(pdev))) {
+ DPRINTK(PROBE, ERR, "Cannot enable PCI device, aborting.\n");
+ goto err_out_free_dev;
+ }
+
+ if(!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
+ DPRINTK(PROBE, ERR, "Cannot find proper PCI device "
+ "base address, aborting.\n");
+ err = -ENODEV;
+ goto err_out_disable_pdev;
+ }
+
+ if((err = pci_request_regions(pdev, DRV_NAME))) {
+ DPRINTK(PROBE, ERR, "Cannot obtain PCI resources, aborting.\n");
+ goto err_out_disable_pdev;
+ }
+
+ if((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK))) {
+ DPRINTK(PROBE, ERR, "No usable DMA configuration, aborting.\n");
+ goto err_out_free_res;
+ }
+
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ if (use_io)
+ DPRINTK(PROBE, INFO, "using i/o access mode\n");
+
+ nic->csr = pci_iomap(pdev, (use_io ? 1 : 0), sizeof(struct csr));
+ if(!nic->csr) {
+ DPRINTK(PROBE, ERR, "Cannot map device registers, aborting.\n");
+ err = -ENOMEM;
+ goto err_out_free_res;
+ }
+
+ if(ent->driver_data)
+ nic->flags |= ich;
+ else
+ nic->flags &= ~ich;
+
+ e100_get_defaults(nic);
+
+ /* locks must be initialized before calling hw_reset */
+ spin_lock_init(&nic->cb_lock);
+ spin_lock_init(&nic->cmd_lock);
+ spin_lock_init(&nic->mdio_lock);
+
+ /* Reset the device before pci_set_master() in case device is in some
+ * funky state and has an interrupt pending - hint: we don't have the
+ * interrupt handler registered yet. */
+ e100_hw_reset(nic);
+
+ pci_set_master(pdev);
+
+ init_timer(&nic->watchdog);
+ nic->watchdog.function = e100_watchdog;
+ nic->watchdog.data = (unsigned long)nic;
+ init_timer(&nic->blink_timer);
+ nic->blink_timer.function = e100_blink_led;
+ nic->blink_timer.data = (unsigned long)nic;
+
+ INIT_WORK(&nic->tx_timeout_task, e100_tx_timeout_task);
+
+ if((err = e100_alloc(nic))) {
+ DPRINTK(PROBE, ERR, "Cannot alloc driver memory, aborting.\n");
+ goto err_out_iounmap;
+ }
+
+ if((err = e100_eeprom_load(nic)))
+ goto err_out_free;
+
+ e100_phy_init(nic);
+
+ memcpy(netdev->dev_addr, nic->eeprom, ETH_ALEN);
+ memcpy(netdev->perm_addr, nic->eeprom, ETH_ALEN);
+ if (!is_valid_ether_addr(netdev->perm_addr)) {
+ if (!eeprom_bad_csum_allow) {
+ DPRINTK(PROBE, ERR, "Invalid MAC address from "
+ "EEPROM, aborting.\n");
+ err = -EAGAIN;
+ goto err_out_free;
+ } else {
+ DPRINTK(PROBE, ERR, "Invalid MAC address from EEPROM, "
+ "you MUST configure one.\n");
+ }
+ }
+
+ /* Wol magic packet can be enabled from eeprom */
+ if((nic->mac >= mac_82558_D101_A4) &&
+ (nic->eeprom[eeprom_id] & eeprom_id_wol)) {
+ nic->flags |= wol_magic;
+ device_set_wakeup_enable(&pdev->dev, true);
+ }
+
+ /* ack any pending wake events, disable PME */
+ pci_pme_active(pdev, false);
+
+ // offer device to EtherCAT master module
+ nic->ecdev = ecdev_offer(netdev, e100_ec_poll, THIS_MODULE);
+ if (nic->ecdev) {
+ if (ecdev_open(nic->ecdev)) {
+ ecdev_withdraw(nic->ecdev);
+ goto err_out_free;
+ }
+ } else {
+ strcpy(netdev->name, "eth%d");
+ if((err = register_netdev(netdev))) {
+ DPRINTK(PROBE, ERR, "Cannot register net device, aborting.\n");
+ goto err_out_free;
+ }
+ }
+
+ DPRINTK(PROBE, INFO, "addr 0x%llx, irq %d, MAC addr %s\n",
+ (unsigned long long)pci_resource_start(pdev, use_io ? 1 : 0),
+ pdev->irq, print_mac(mac, netdev->dev_addr));
+
+ return 0;
+
+err_out_free:
+ e100_free(nic);
+err_out_iounmap:
+ pci_iounmap(pdev, nic->csr);
+err_out_free_res:
+ pci_release_regions(pdev);
+err_out_disable_pdev:
+ pci_disable_device(pdev);
+err_out_free_dev:
+ pci_set_drvdata(pdev, NULL);
+ free_netdev(netdev);
+ return err;
+}
+
+static void __devexit e100_remove(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+
+ if(netdev) {
+ struct nic *nic = netdev_priv(netdev);
+ if (nic->ecdev) {
+ ecdev_close(nic->ecdev);
+ ecdev_withdraw(nic->ecdev);
+ } else {
+ unregister_netdev(netdev);
+ }
+
+ e100_free(nic);
+ pci_iounmap(pdev, nic->csr);
+ free_netdev(netdev);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+ }
+}
+
+static int e100_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct nic *nic = netdev_priv(netdev);
+
+ if (nic->ecdev)
+ return 0;
+
+ if (netif_running(netdev))
+ e100_down(nic);
+ netif_device_detach(netdev);
+
+ pci_save_state(pdev);
+
+ if ((nic->flags & wol_magic) | e100_asf(nic)) {
+ if (pci_enable_wake(pdev, PCI_D3cold, true))
+ pci_enable_wake(pdev, PCI_D3hot, true);
+ } else {
+ pci_enable_wake(pdev, PCI_D3hot, false);
+ }
+
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, PCI_D3hot);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int e100_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct nic *nic = netdev_priv(netdev);
+
+ if (nic->ecdev)
+ return 0;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ /* ack any pending wake events, disable PME */
+ pci_enable_wake(pdev, 0, 0);
+
+ netif_device_attach(netdev);
+ if (netif_running(netdev))
+ e100_up(nic);
+
+ return 0;
+}
+#endif /* CONFIG_PM */
+
+static void e100_shutdown(struct pci_dev *pdev)
+{
+ e100_suspend(pdev, PMSG_SUSPEND);
+}
+
+/* ------------------ PCI Error Recovery infrastructure -------------- */
+/**
+ * e100_io_error_detected - called when PCI error is detected.
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ */
+static pci_ers_result_t e100_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct nic *nic = netdev_priv(netdev);
+
+ /* Similar to calling e100_down(), but avoids adapter I/O. */
+ netdev->stop(netdev);
+
+ if (!nic->ecdev) {
+ /* Detach; put netif into a state similar to hotplug unplug. */
+ napi_enable(&nic->napi);
+ netif_device_detach(netdev);
+ }
+ pci_disable_device(pdev);
+
+ /* Request a slot reset. */
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * e100_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch.
+ */
+static pci_ers_result_t e100_io_slot_reset(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct nic *nic = netdev_priv(netdev);
+
+ if (pci_enable_device(pdev)) {
+ printk(KERN_ERR "e100: Cannot re-enable PCI device after reset.\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+ pci_set_master(pdev);
+
+ /* Only one device per card can do a reset */
+ if (0 != PCI_FUNC(pdev->devfn))
+ return PCI_ERS_RESULT_RECOVERED;
+ e100_hw_reset(nic);
+ e100_phy_init(nic);
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * e100_io_resume - resume normal operations
+ * @pdev: Pointer to PCI device
+ *
+ * Resume normal operations after an error recovery
+ * sequence has been completed.
+ */
+static void e100_io_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct nic *nic = netdev_priv(netdev);
+
+ /* ack any pending wake events, disable PME */
+ pci_enable_wake(pdev, 0, 0);
+
+ if (!nic->ecdev)
+ netif_device_attach(netdev);
+ if (nic->ecdev || netif_running(netdev)) {
+ e100_open(netdev);
+ if (!nic->ecdev)
+ mod_timer(&nic->watchdog, jiffies);
+ }
+}
+
+static struct pci_error_handlers e100_err_handler = {
+ .error_detected = e100_io_error_detected,
+ .slot_reset = e100_io_slot_reset,
+ .resume = e100_io_resume,
+};
+
+static struct pci_driver e100_driver = {
+ .name = DRV_NAME,
+ .id_table = e100_id_table,
+ .probe = e100_probe,
+ .remove = __devexit_p(e100_remove),
+#ifdef CONFIG_PM
+ /* Power Management hooks */
+ .suspend = e100_suspend,
+ .resume = e100_resume,
+#endif
+ .shutdown = e100_shutdown,
+ .err_handler = &e100_err_handler,
+};
+
+static int __init e100_init_module(void)
+{
+ printk(KERN_INFO DRV_NAME " " DRV_DESCRIPTION " " DRV_VERSION
+ ", master " EC_MASTER_VERSION "\n");
+
+ return pci_register_driver(&e100_driver);
+}
+
+static void __exit e100_cleanup_module(void)
+{
+ printk(KERN_INFO DRV_NAME " cleaning up module...\n");
+ pci_unregister_driver(&e100_driver);
+ printk(KERN_INFO DRV_NAME " module cleaned up.\n");
+}
+
+module_init(e100_init_module);
+module_exit(e100_cleanup_module);
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e100-2.6.27-orig.c Mon Jan 04 11:28:29 2010 +0100
@@ -0,0 +1,2947 @@
+/*******************************************************************************
+
+ Intel PRO/100 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/*
+ * e100.c: Intel(R) PRO/100 ethernet driver
+ *
+ * (Re)written 2003 by scott.feldman@intel.com. Based loosely on
+ * original e100 driver, but better described as a munging of
+ * e100, e1000, eepro100, tg3, 8139cp, and other drivers.
+ *
+ * References:
+ * Intel 8255x 10/100 Mbps Ethernet Controller Family,
+ * Open Source Software Developers Manual,
+ * http://sourceforge.net/projects/e1000
+ *
+ *
+ * Theory of Operation
+ *
+ * I. General
+ *
+ * The driver supports Intel(R) 10/100 Mbps PCI Fast Ethernet
+ * controller family, which includes the 82557, 82558, 82559, 82550,
+ * 82551, and 82562 devices. 82558 and greater controllers
+ * integrate the Intel 82555 PHY. The controllers are used in
+ * server and client network interface cards, as well as in
+ * LAN-On-Motherboard (LOM), CardBus, MiniPCI, and ICHx
+ * configurations. 8255x supports a 32-bit linear addressing
+ * mode and operates at 33Mhz PCI clock rate.
+ *
+ * II. Driver Operation
+ *
+ * Memory-mapped mode is used exclusively to access the device's
+ * shared-memory structure, the Control/Status Registers (CSR). All
+ * setup, configuration, and control of the device, including queuing
+ * of Tx, Rx, and configuration commands is through the CSR.
+ * cmd_lock serializes accesses to the CSR command register. cb_lock
+ * protects the shared Command Block List (CBL).
+ *
+ * 8255x is highly MII-compliant and all access to the PHY go
+ * through the Management Data Interface (MDI). Consequently, the
+ * driver leverages the mii.c library shared with other MII-compliant
+ * devices.
+ *
+ * Big- and Little-Endian byte order as well as 32- and 64-bit
+ * archs are supported. Weak-ordered memory and non-cache-coherent
+ * archs are supported.
+ *
+ * III. Transmit
+ *
+ * A Tx skb is mapped and hangs off of a TCB. TCBs are linked
+ * together in a fixed-size ring (CBL) thus forming the flexible mode
+ * memory structure. A TCB marked with the suspend-bit indicates
+ * the end of the ring. The last TCB processed suspends the
+ * controller, and the controller can be restarted by issue a CU
+ * resume command to continue from the suspend point, or a CU start
+ * command to start at a given position in the ring.
+ *
+ * Non-Tx commands (config, multicast setup, etc) are linked
+ * into the CBL ring along with Tx commands. The common structure
+ * used for both Tx and non-Tx commands is the Command Block (CB).
+ *
+ * cb_to_use is the next CB to use for queuing a command; cb_to_clean
+ * is the next CB to check for completion; cb_to_send is the first
+ * CB to start on in case of a previous failure to resume. CB clean
+ * up happens in interrupt context in response to a CU interrupt.
+ * cbs_avail keeps track of number of free CB resources available.
+ *
+ * Hardware padding of short packets to minimum packet size is
+ * enabled. 82557 pads with 7Eh, while the later controllers pad
+ * with 00h.
+ *
+ * IV. Receive
+ *
+ * The Receive Frame Area (RFA) comprises a ring of Receive Frame
+ * Descriptors (RFD) + data buffer, thus forming the simplified mode
+ * memory structure. Rx skbs are allocated to contain both the RFD
+ * and the data buffer, but the RFD is pulled off before the skb is
+ * indicated. The data buffer is aligned such that encapsulated
+ * protocol headers are u32-aligned. Since the RFD is part of the
+ * mapped shared memory, and completion status is contained within
+ * the RFD, the RFD must be dma_sync'ed to maintain a consistent
+ * view from software and hardware.
+ *
+ * In order to keep updates to the RFD link field from colliding with
+ * hardware writes to mark packets complete, we use the feature that
+ * hardware will not write to a size 0 descriptor and mark the previous
+ * packet as end-of-list (EL). After updating the link, we remove EL
+ * and only then restore the size such that hardware may use the
+ * previous-to-end RFD.
+ *
+ * Under typical operation, the receive unit (RU) is start once,
+ * and the controller happily fills RFDs as frames arrive. If
+ * replacement RFDs cannot be allocated, or the RU goes non-active,
+ * the RU must be restarted. Frame arrival generates an interrupt,
+ * and Rx indication and re-allocation happen in the same context,
+ * therefore no locking is required. A software-generated interrupt
+ * is generated from the watchdog to recover from a failed allocation
+ * scenario where all Rx resources have been indicated and none re-
+ * placed.
+ *
+ * V. Miscellaneous
+ *
+ * VLAN offloading of tagging, stripping and filtering is not
+ * supported, but driver will accommodate the extra 4-byte VLAN tag
+ * for processing by upper layers. Tx/Rx Checksum offloading is not
+ * supported. Tx Scatter/Gather is not supported. Jumbo Frames is
+ * not supported (hardware limitation).
+ *
+ * MagicPacket(tm) WoL support is enabled/disabled via ethtool.
+ *
+ * Thanks to JC (jchapman@katalix.com) for helping with
+ * testing/troubleshooting the development driver.
+ *
+ * TODO:
+ * o several entry points race with dev->close
+ * o check for tx-no-resources/stop Q races with tx clean/wake Q
+ *
+ * FIXES:
+ * 2005/12/02 - Michael O'Donnell <Michael.ODonnell at stratus dot com>
+ * - Stratus87247: protect MDI control register manipulations
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/mii.h>
+#include <linux/if_vlan.h>
+#include <linux/skbuff.h>
+#include <linux/ethtool.h>
+#include <linux/string.h>
+#include <asm/unaligned.h>
+
+
+#define DRV_NAME "e100"
+#define DRV_EXT "-NAPI"
+#define DRV_VERSION "3.5.23-k4"DRV_EXT
+#define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver"
+#define DRV_COPYRIGHT "Copyright(c) 1999-2006 Intel Corporation"
+#define PFX DRV_NAME ": "
+
+#define E100_WATCHDOG_PERIOD (2 * HZ)
+#define E100_NAPI_WEIGHT 16
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_AUTHOR(DRV_COPYRIGHT);
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+static int debug = 3;
+static int eeprom_bad_csum_allow = 0;
+static int use_io = 0;
+module_param(debug, int, 0);
+module_param(eeprom_bad_csum_allow, int, 0);
+module_param(use_io, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+MODULE_PARM_DESC(eeprom_bad_csum_allow, "Allow bad eeprom checksums");
+MODULE_PARM_DESC(use_io, "Force use of i/o access mode");
+#define DPRINTK(nlevel, klevel, fmt, args...) \
+ (void)((NETIF_MSG_##nlevel & nic->msg_enable) && \
+ printk(KERN_##klevel PFX "%s: %s: " fmt, nic->netdev->name, \
+ __FUNCTION__ , ## args))
+
+#define INTEL_8255X_ETHERNET_DEVICE(device_id, ich) {\
+ PCI_VENDOR_ID_INTEL, device_id, PCI_ANY_ID, PCI_ANY_ID, \
+ PCI_CLASS_NETWORK_ETHERNET << 8, 0xFFFF00, ich }
+static struct pci_device_id e100_id_table[] = {
+ INTEL_8255X_ETHERNET_DEVICE(0x1029, 0),
+ INTEL_8255X_ETHERNET_DEVICE(0x1030, 0),
+ INTEL_8255X_ETHERNET_DEVICE(0x1031, 3),
+ INTEL_8255X_ETHERNET_DEVICE(0x1032, 3),
+ INTEL_8255X_ETHERNET_DEVICE(0x1033, 3),
+ INTEL_8255X_ETHERNET_DEVICE(0x1034, 3),
+ INTEL_8255X_ETHERNET_DEVICE(0x1038, 3),
+ INTEL_8255X_ETHERNET_DEVICE(0x1039, 4),
+ INTEL_8255X_ETHERNET_DEVICE(0x103A, 4),
+ INTEL_8255X_ETHERNET_DEVICE(0x103B, 4),
+ INTEL_8255X_ETHERNET_DEVICE(0x103C, 4),
+ INTEL_8255X_ETHERNET_DEVICE(0x103D, 4),
+ INTEL_8255X_ETHERNET_DEVICE(0x103E, 4),
+ INTEL_8255X_ETHERNET_DEVICE(0x1050, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1051, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1052, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1053, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1054, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1055, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1056, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1057, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1059, 0),
+ INTEL_8255X_ETHERNET_DEVICE(0x1064, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x1065, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x1066, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x1067, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x1068, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x1069, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x106A, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x106B, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x1091, 7),
+ INTEL_8255X_ETHERNET_DEVICE(0x1092, 7),
+ INTEL_8255X_ETHERNET_DEVICE(0x1093, 7),
+ INTEL_8255X_ETHERNET_DEVICE(0x1094, 7),
+ INTEL_8255X_ETHERNET_DEVICE(0x1095, 7),
+ INTEL_8255X_ETHERNET_DEVICE(0x1209, 0),
+ INTEL_8255X_ETHERNET_DEVICE(0x1229, 0),
+ INTEL_8255X_ETHERNET_DEVICE(0x2449, 2),
+ INTEL_8255X_ETHERNET_DEVICE(0x2459, 2),
+ INTEL_8255X_ETHERNET_DEVICE(0x245D, 2),
+ INTEL_8255X_ETHERNET_DEVICE(0x27DC, 7),
+ { 0, }
+};
+MODULE_DEVICE_TABLE(pci, e100_id_table);
+
+enum mac {
+ mac_82557_D100_A = 0,
+ mac_82557_D100_B = 1,
+ mac_82557_D100_C = 2,
+ mac_82558_D101_A4 = 4,
+ mac_82558_D101_B0 = 5,
+ mac_82559_D101M = 8,
+ mac_82559_D101S = 9,
+ mac_82550_D102 = 12,
+ mac_82550_D102_C = 13,
+ mac_82551_E = 14,
+ mac_82551_F = 15,
+ mac_82551_10 = 16,
+ mac_unknown = 0xFF,
+};
+
+enum phy {
+ phy_100a = 0x000003E0,
+ phy_100c = 0x035002A8,
+ phy_82555_tx = 0x015002A8,
+ phy_nsc_tx = 0x5C002000,
+ phy_82562_et = 0x033002A8,
+ phy_82562_em = 0x032002A8,
+ phy_82562_ek = 0x031002A8,
+ phy_82562_eh = 0x017002A8,
+ phy_unknown = 0xFFFFFFFF,
+};
+
+/* CSR (Control/Status Registers) */
+struct csr {
+ struct {
+ u8 status;
+ u8 stat_ack;
+ u8 cmd_lo;
+ u8 cmd_hi;
+ u32 gen_ptr;
+ } scb;
+ u32 port;
+ u16 flash_ctrl;
+ u8 eeprom_ctrl_lo;
+ u8 eeprom_ctrl_hi;
+ u32 mdi_ctrl;
+ u32 rx_dma_count;
+};
+
+enum scb_status {
+ rus_no_res = 0x08,
+ rus_ready = 0x10,
+ rus_mask = 0x3C,
+};
+
+enum ru_state {
+ RU_SUSPENDED = 0,
+ RU_RUNNING = 1,
+ RU_UNINITIALIZED = -1,
+};
+
+enum scb_stat_ack {
+ stat_ack_not_ours = 0x00,
+ stat_ack_sw_gen = 0x04,
+ stat_ack_rnr = 0x10,
+ stat_ack_cu_idle = 0x20,
+ stat_ack_frame_rx = 0x40,
+ stat_ack_cu_cmd_done = 0x80,
+ stat_ack_not_present = 0xFF,
+ stat_ack_rx = (stat_ack_sw_gen | stat_ack_rnr | stat_ack_frame_rx),
+ stat_ack_tx = (stat_ack_cu_idle | stat_ack_cu_cmd_done),
+};
+
+enum scb_cmd_hi {
+ irq_mask_none = 0x00,
+ irq_mask_all = 0x01,
+ irq_sw_gen = 0x02,
+};
+
+enum scb_cmd_lo {
+ cuc_nop = 0x00,
+ ruc_start = 0x01,
+ ruc_load_base = 0x06,
+ cuc_start = 0x10,
+ cuc_resume = 0x20,
+ cuc_dump_addr = 0x40,
+ cuc_dump_stats = 0x50,
+ cuc_load_base = 0x60,
+ cuc_dump_reset = 0x70,
+};
+
+enum cuc_dump {
+ cuc_dump_complete = 0x0000A005,
+ cuc_dump_reset_complete = 0x0000A007,
+};
+
+enum port {
+ software_reset = 0x0000,
+ selftest = 0x0001,
+ selective_reset = 0x0002,
+};
+
+enum eeprom_ctrl_lo {
+ eesk = 0x01,
+ eecs = 0x02,
+ eedi = 0x04,
+ eedo = 0x08,
+};
+
+enum mdi_ctrl {
+ mdi_write = 0x04000000,
+ mdi_read = 0x08000000,
+ mdi_ready = 0x10000000,
+};
+
+enum eeprom_op {
+ op_write = 0x05,
+ op_read = 0x06,
+ op_ewds = 0x10,
+ op_ewen = 0x13,
+};
+
+enum eeprom_offsets {
+ eeprom_cnfg_mdix = 0x03,
+ eeprom_id = 0x0A,
+ eeprom_config_asf = 0x0D,
+ eeprom_smbus_addr = 0x90,
+};
+
+enum eeprom_cnfg_mdix {
+ eeprom_mdix_enabled = 0x0080,
+};
+
+enum eeprom_id {
+ eeprom_id_wol = 0x0020,
+};
+
+enum eeprom_config_asf {
+ eeprom_asf = 0x8000,
+ eeprom_gcl = 0x4000,
+};
+
+enum cb_status {
+ cb_complete = 0x8000,
+ cb_ok = 0x2000,
+};
+
+enum cb_command {
+ cb_nop = 0x0000,
+ cb_iaaddr = 0x0001,
+ cb_config = 0x0002,
+ cb_multi = 0x0003,
+ cb_tx = 0x0004,
+ cb_ucode = 0x0005,
+ cb_dump = 0x0006,
+ cb_tx_sf = 0x0008,
+ cb_cid = 0x1f00,
+ cb_i = 0x2000,
+ cb_s = 0x4000,
+ cb_el = 0x8000,
+};
+
+struct rfd {
+ __le16 status;
+ __le16 command;
+ __le32 link;
+ __le32 rbd;
+ __le16 actual_size;
+ __le16 size;
+};
+
+struct rx {
+ struct rx *next, *prev;
+ struct sk_buff *skb;
+ dma_addr_t dma_addr;
+};
+
+#if defined(__BIG_ENDIAN_BITFIELD)
+#define X(a,b) b,a
+#else
+#define X(a,b) a,b
+#endif
+struct config {
+/*0*/ u8 X(byte_count:6, pad0:2);
+/*1*/ u8 X(X(rx_fifo_limit:4, tx_fifo_limit:3), pad1:1);
+/*2*/ u8 adaptive_ifs;
+/*3*/ u8 X(X(X(X(mwi_enable:1, type_enable:1), read_align_enable:1),
+ term_write_cache_line:1), pad3:4);
+/*4*/ u8 X(rx_dma_max_count:7, pad4:1);
+/*5*/ u8 X(tx_dma_max_count:7, dma_max_count_enable:1);
+/*6*/ u8 X(X(X(X(X(X(X(late_scb_update:1, direct_rx_dma:1),
+ tno_intr:1), cna_intr:1), standard_tcb:1), standard_stat_counter:1),
+ rx_discard_overruns:1), rx_save_bad_frames:1);
+/*7*/ u8 X(X(X(X(X(rx_discard_short_frames:1, tx_underrun_retry:2),
+ pad7:2), rx_extended_rfd:1), tx_two_frames_in_fifo:1),
+ tx_dynamic_tbd:1);
+/*8*/ u8 X(X(mii_mode:1, pad8:6), csma_disabled:1);
+/*9*/ u8 X(X(X(X(X(rx_tcpudp_checksum:1, pad9:3), vlan_arp_tco:1),
+ link_status_wake:1), arp_wake:1), mcmatch_wake:1);
+/*10*/ u8 X(X(X(pad10:3, no_source_addr_insertion:1), preamble_length:2),
+ loopback:2);
+/*11*/ u8 X(linear_priority:3, pad11:5);
+/*12*/ u8 X(X(linear_priority_mode:1, pad12:3), ifs:4);
+/*13*/ u8 ip_addr_lo;
+/*14*/ u8 ip_addr_hi;
+/*15*/ u8 X(X(X(X(X(X(X(promiscuous_mode:1, broadcast_disabled:1),
+ wait_after_win:1), pad15_1:1), ignore_ul_bit:1), crc_16_bit:1),
+ pad15_2:1), crs_or_cdt:1);
+/*16*/ u8 fc_delay_lo;
+/*17*/ u8 fc_delay_hi;
+/*18*/ u8 X(X(X(X(X(rx_stripping:1, tx_padding:1), rx_crc_transfer:1),
+ rx_long_ok:1), fc_priority_threshold:3), pad18:1);
+/*19*/ u8 X(X(X(X(X(X(X(addr_wake:1, magic_packet_disable:1),
+ fc_disable:1), fc_restop:1), fc_restart:1), fc_reject:1),
+ full_duplex_force:1), full_duplex_pin:1);
+/*20*/ u8 X(X(X(pad20_1:5, fc_priority_location:1), multi_ia:1), pad20_2:1);
+/*21*/ u8 X(X(pad21_1:3, multicast_all:1), pad21_2:4);
+/*22*/ u8 X(X(rx_d102_mode:1, rx_vlan_drop:1), pad22:6);
+ u8 pad_d102[9];
+};
+
+#define E100_MAX_MULTICAST_ADDRS 64
+struct multi {
+ __le16 count;
+ u8 addr[E100_MAX_MULTICAST_ADDRS * ETH_ALEN + 2/*pad*/];
+};
+
+/* Important: keep total struct u32-aligned */
+#define UCODE_SIZE 134
+struct cb {
+ __le16 status;
+ __le16 command;
+ __le32 link;
+ union {
+ u8 iaaddr[ETH_ALEN];
+ __le32 ucode[UCODE_SIZE];
+ struct config config;
+ struct multi multi;
+ struct {
+ u32 tbd_array;
+ u16 tcb_byte_count;
+ u8 threshold;
+ u8 tbd_count;
+ struct {
+ __le32 buf_addr;
+ __le16 size;
+ u16 eol;
+ } tbd;
+ } tcb;
+ __le32 dump_buffer_addr;
+ } u;
+ struct cb *next, *prev;
+ dma_addr_t dma_addr;
+ struct sk_buff *skb;
+};
+
+enum loopback {
+ lb_none = 0, lb_mac = 1, lb_phy = 3,
+};
+
+struct stats {
+ __le32 tx_good_frames, tx_max_collisions, tx_late_collisions,
+ tx_underruns, tx_lost_crs, tx_deferred, tx_single_collisions,
+ tx_multiple_collisions, tx_total_collisions;
+ __le32 rx_good_frames, rx_crc_errors, rx_alignment_errors,
+ rx_resource_errors, rx_overrun_errors, rx_cdt_errors,
+ rx_short_frame_errors;
+ __le32 fc_xmt_pause, fc_rcv_pause, fc_rcv_unsupported;
+ __le16 xmt_tco_frames, rcv_tco_frames;
+ __le32 complete;
+};
+
+struct mem {
+ struct {
+ u32 signature;
+ u32 result;
+ } selftest;
+ struct stats stats;
+ u8 dump_buf[596];
+};
+
+struct param_range {
+ u32 min;
+ u32 max;
+ u32 count;
+};
+
+struct params {
+ struct param_range rfds;
+ struct param_range cbs;
+};
+
+struct nic {
+ /* Begin: frequently used values: keep adjacent for cache effect */
+ u32 msg_enable ____cacheline_aligned;
+ struct net_device *netdev;
+ struct pci_dev *pdev;
+
+ struct rx *rxs ____cacheline_aligned;
+ struct rx *rx_to_use;
+ struct rx *rx_to_clean;
+ struct rfd blank_rfd;
+ enum ru_state ru_running;
+
+ spinlock_t cb_lock ____cacheline_aligned;
+ spinlock_t cmd_lock;
+ struct csr __iomem *csr;
+ enum scb_cmd_lo cuc_cmd;
+ unsigned int cbs_avail;
+ struct napi_struct napi;
+ struct cb *cbs;
+ struct cb *cb_to_use;
+ struct cb *cb_to_send;
+ struct cb *cb_to_clean;
+ __le16 tx_command;
+ /* End: frequently used values: keep adjacent for cache effect */
+
+ enum {
+ ich = (1 << 0),
+ promiscuous = (1 << 1),
+ multicast_all = (1 << 2),
+ wol_magic = (1 << 3),
+ ich_10h_workaround = (1 << 4),
+ } flags ____cacheline_aligned;
+
+ enum mac mac;
+ enum phy phy;
+ struct params params;
+ struct timer_list watchdog;
+ struct timer_list blink_timer;
+ struct mii_if_info mii;
+ struct work_struct tx_timeout_task;
+ enum loopback loopback;
+
+ struct mem *mem;
+ dma_addr_t dma_addr;
+
+ dma_addr_t cbs_dma_addr;
+ u8 adaptive_ifs;
+ u8 tx_threshold;
+ u32 tx_frames;
+ u32 tx_collisions;
+ u32 tx_deferred;
+ u32 tx_single_collisions;
+ u32 tx_multiple_collisions;
+ u32 tx_fc_pause;
+ u32 tx_tco_frames;
+
+ u32 rx_fc_pause;
+ u32 rx_fc_unsupported;
+ u32 rx_tco_frames;
+ u32 rx_over_length_errors;
+
+ u16 leds;
+ u16 eeprom_wc;
+ __le16 eeprom[256];
+ spinlock_t mdio_lock;
+};
+
+static inline void e100_write_flush(struct nic *nic)
+{
+ /* Flush previous PCI writes through intermediate bridges
+ * by doing a benign read */
+ (void)ioread8(&nic->csr->scb.status);
+}
+
+static void e100_enable_irq(struct nic *nic)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&nic->cmd_lock, flags);
+ iowrite8(irq_mask_none, &nic->csr->scb.cmd_hi);
+ e100_write_flush(nic);
+ spin_unlock_irqrestore(&nic->cmd_lock, flags);
+}
+
+static void e100_disable_irq(struct nic *nic)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&nic->cmd_lock, flags);
+ iowrite8(irq_mask_all, &nic->csr->scb.cmd_hi);
+ e100_write_flush(nic);
+ spin_unlock_irqrestore(&nic->cmd_lock, flags);
+}
+
+static void e100_hw_reset(struct nic *nic)
+{
+ /* Put CU and RU into idle with a selective reset to get
+ * device off of PCI bus */
+ iowrite32(selective_reset, &nic->csr->port);
+ e100_write_flush(nic); udelay(20);
+
+ /* Now fully reset device */
+ iowrite32(software_reset, &nic->csr->port);
+ e100_write_flush(nic); udelay(20);
+
+ /* Mask off our interrupt line - it's unmasked after reset */
+ e100_disable_irq(nic);
+}
+
+static int e100_self_test(struct nic *nic)
+{
+ u32 dma_addr = nic->dma_addr + offsetof(struct mem, selftest);
+
+ /* Passing the self-test is a pretty good indication
+ * that the device can DMA to/from host memory */
+
+ nic->mem->selftest.signature = 0;
+ nic->mem->selftest.result = 0xFFFFFFFF;
+
+ iowrite32(selftest | dma_addr, &nic->csr->port);
+ e100_write_flush(nic);
+ /* Wait 10 msec for self-test to complete */
+ msleep(10);
+
+ /* Interrupts are enabled after self-test */
+ e100_disable_irq(nic);
+
+ /* Check results of self-test */
+ if(nic->mem->selftest.result != 0) {
+ DPRINTK(HW, ERR, "Self-test failed: result=0x%08X\n",
+ nic->mem->selftest.result);
+ return -ETIMEDOUT;
+ }
+ if(nic->mem->selftest.signature == 0) {
+ DPRINTK(HW, ERR, "Self-test failed: timed out\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static void e100_eeprom_write(struct nic *nic, u16 addr_len, u16 addr, __le16 data)
+{
+ u32 cmd_addr_data[3];
+ u8 ctrl;
+ int i, j;
+
+ /* Three cmds: write/erase enable, write data, write/erase disable */
+ cmd_addr_data[0] = op_ewen << (addr_len - 2);
+ cmd_addr_data[1] = (((op_write << addr_len) | addr) << 16) |
+ le16_to_cpu(data);
+ cmd_addr_data[2] = op_ewds << (addr_len - 2);
+
+ /* Bit-bang cmds to write word to eeprom */
+ for(j = 0; j < 3; j++) {
+
+ /* Chip select */
+ iowrite8(eecs | eesk, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+
+ for(i = 31; i >= 0; i--) {
+ ctrl = (cmd_addr_data[j] & (1 << i)) ?
+ eecs | eedi : eecs;
+ iowrite8(ctrl, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+
+ iowrite8(ctrl | eesk, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+ }
+ /* Wait 10 msec for cmd to complete */
+ msleep(10);
+
+ /* Chip deselect */
+ iowrite8(0, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+ }
+};
+
+/* General technique stolen from the eepro100 driver - very clever */
+static __le16 e100_eeprom_read(struct nic *nic, u16 *addr_len, u16 addr)
+{
+ u32 cmd_addr_data;
+ u16 data = 0;
+ u8 ctrl;
+ int i;
+
+ cmd_addr_data = ((op_read << *addr_len) | addr) << 16;
+
+ /* Chip select */
+ iowrite8(eecs | eesk, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+
+ /* Bit-bang to read word from eeprom */
+ for(i = 31; i >= 0; i--) {
+ ctrl = (cmd_addr_data & (1 << i)) ? eecs | eedi : eecs;
+ iowrite8(ctrl, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+
+ iowrite8(ctrl | eesk, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+
+ /* Eeprom drives a dummy zero to EEDO after receiving
+ * complete address. Use this to adjust addr_len. */
+ ctrl = ioread8(&nic->csr->eeprom_ctrl_lo);
+ if(!(ctrl & eedo) && i > 16) {
+ *addr_len -= (i - 16);
+ i = 17;
+ }
+
+ data = (data << 1) | (ctrl & eedo ? 1 : 0);
+ }
+
+ /* Chip deselect */
+ iowrite8(0, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+
+ return cpu_to_le16(data);
+};
+
+/* Load entire EEPROM image into driver cache and validate checksum */
+static int e100_eeprom_load(struct nic *nic)
+{
+ u16 addr, addr_len = 8, checksum = 0;
+
+ /* Try reading with an 8-bit addr len to discover actual addr len */
+ e100_eeprom_read(nic, &addr_len, 0);
+ nic->eeprom_wc = 1 << addr_len;
+
+ for(addr = 0; addr < nic->eeprom_wc; addr++) {
+ nic->eeprom[addr] = e100_eeprom_read(nic, &addr_len, addr);
+ if(addr < nic->eeprom_wc - 1)
+ checksum += le16_to_cpu(nic->eeprom[addr]);
+ }
+
+ /* The checksum, stored in the last word, is calculated such that
+ * the sum of words should be 0xBABA */
+ if (cpu_to_le16(0xBABA - checksum) != nic->eeprom[nic->eeprom_wc - 1]) {
+ DPRINTK(PROBE, ERR, "EEPROM corrupted\n");
+ if (!eeprom_bad_csum_allow)
+ return -EAGAIN;
+ }
+
+ return 0;
+}
+
+/* Save (portion of) driver EEPROM cache to device and update checksum */
+static int e100_eeprom_save(struct nic *nic, u16 start, u16 count)
+{
+ u16 addr, addr_len = 8, checksum = 0;
+
+ /* Try reading with an 8-bit addr len to discover actual addr len */
+ e100_eeprom_read(nic, &addr_len, 0);
+ nic->eeprom_wc = 1 << addr_len;
+
+ if(start + count >= nic->eeprom_wc)
+ return -EINVAL;
+
+ for(addr = start; addr < start + count; addr++)
+ e100_eeprom_write(nic, addr_len, addr, nic->eeprom[addr]);
+
+ /* The checksum, stored in the last word, is calculated such that
+ * the sum of words should be 0xBABA */
+ for(addr = 0; addr < nic->eeprom_wc - 1; addr++)
+ checksum += le16_to_cpu(nic->eeprom[addr]);
+ nic->eeprom[nic->eeprom_wc - 1] = cpu_to_le16(0xBABA - checksum);
+ e100_eeprom_write(nic, addr_len, nic->eeprom_wc - 1,
+ nic->eeprom[nic->eeprom_wc - 1]);
+
+ return 0;
+}
+
+#define E100_WAIT_SCB_TIMEOUT 20000 /* we might have to wait 100ms!!! */
+#define E100_WAIT_SCB_FAST 20 /* delay like the old code */
+static int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr)
+{
+ unsigned long flags;
+ unsigned int i;
+ int err = 0;
+
+ spin_lock_irqsave(&nic->cmd_lock, flags);
+
+ /* Previous command is accepted when SCB clears */
+ for(i = 0; i < E100_WAIT_SCB_TIMEOUT; i++) {
+ if(likely(!ioread8(&nic->csr->scb.cmd_lo)))
+ break;
+ cpu_relax();
+ if(unlikely(i > E100_WAIT_SCB_FAST))
+ udelay(5);
+ }
+ if(unlikely(i == E100_WAIT_SCB_TIMEOUT)) {
+ err = -EAGAIN;
+ goto err_unlock;
+ }
+
+ if(unlikely(cmd != cuc_resume))
+ iowrite32(dma_addr, &nic->csr->scb.gen_ptr);
+ iowrite8(cmd, &nic->csr->scb.cmd_lo);
+
+err_unlock:
+ spin_unlock_irqrestore(&nic->cmd_lock, flags);
+
+ return err;
+}
+
+static int e100_exec_cb(struct nic *nic, struct sk_buff *skb,
+ void (*cb_prepare)(struct nic *, struct cb *, struct sk_buff *))
+{
+ struct cb *cb;
+ unsigned long flags;
+ int err = 0;
+
+ spin_lock_irqsave(&nic->cb_lock, flags);
+
+ if(unlikely(!nic->cbs_avail)) {
+ err = -ENOMEM;
+ goto err_unlock;
+ }
+
+ cb = nic->cb_to_use;
+ nic->cb_to_use = cb->next;
+ nic->cbs_avail--;
+ cb->skb = skb;
+
+ if(unlikely(!nic->cbs_avail))
+ err = -ENOSPC;
+
+ cb_prepare(nic, cb, skb);
+
+ /* Order is important otherwise we'll be in a race with h/w:
+ * set S-bit in current first, then clear S-bit in previous. */
+ cb->command |= cpu_to_le16(cb_s);
+ wmb();
+ cb->prev->command &= cpu_to_le16(~cb_s);
+
+ while(nic->cb_to_send != nic->cb_to_use) {
+ if(unlikely(e100_exec_cmd(nic, nic->cuc_cmd,
+ nic->cb_to_send->dma_addr))) {
+ /* Ok, here's where things get sticky. It's
+ * possible that we can't schedule the command
+ * because the controller is too busy, so
+ * let's just queue the command and try again
+ * when another command is scheduled. */
+ if(err == -ENOSPC) {
+ //request a reset
+ schedule_work(&nic->tx_timeout_task);
+ }
+ break;
+ } else {
+ nic->cuc_cmd = cuc_resume;
+ nic->cb_to_send = nic->cb_to_send->next;
+ }
+ }
+
+err_unlock:
+ spin_unlock_irqrestore(&nic->cb_lock, flags);
+
+ return err;
+}
+
+static u16 mdio_ctrl(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data)
+{
+ u32 data_out = 0;
+ unsigned int i;
+ unsigned long flags;
+
+
+ /*
+ * Stratus87247: we shouldn't be writing the MDI control
+ * register until the Ready bit shows True. Also, since
+ * manipulation of the MDI control registers is a multi-step
+ * procedure it should be done under lock.
+ */
+ spin_lock_irqsave(&nic->mdio_lock, flags);
+ for (i = 100; i; --i) {
+ if (ioread32(&nic->csr->mdi_ctrl) & mdi_ready)
+ break;
+ udelay(20);
+ }
+ if (unlikely(!i)) {
+ printk("e100.mdio_ctrl(%s) won't go Ready\n",
+ nic->netdev->name );
+ spin_unlock_irqrestore(&nic->mdio_lock, flags);
+ return 0; /* No way to indicate timeout error */
+ }
+ iowrite32((reg << 16) | (addr << 21) | dir | data, &nic->csr->mdi_ctrl);
+
+ for (i = 0; i < 100; i++) {
+ udelay(20);
+ if ((data_out = ioread32(&nic->csr->mdi_ctrl)) & mdi_ready)
+ break;
+ }
+ spin_unlock_irqrestore(&nic->mdio_lock, flags);
+ DPRINTK(HW, DEBUG,
+ "%s:addr=%d, reg=%d, data_in=0x%04X, data_out=0x%04X\n",
+ dir == mdi_read ? "READ" : "WRITE", addr, reg, data, data_out);
+ return (u16)data_out;
+}
+
+static int mdio_read(struct net_device *netdev, int addr, int reg)
+{
+ return mdio_ctrl(netdev_priv(netdev), addr, mdi_read, reg, 0);
+}
+
+static void mdio_write(struct net_device *netdev, int addr, int reg, int data)
+{
+ mdio_ctrl(netdev_priv(netdev), addr, mdi_write, reg, data);
+}
+
+static void e100_get_defaults(struct nic *nic)
+{
+ struct param_range rfds = { .min = 16, .max = 256, .count = 256 };
+ struct param_range cbs = { .min = 64, .max = 256, .count = 128 };
+
+ /* MAC type is encoded as rev ID; exception: ICH is treated as 82559 */
+ nic->mac = (nic->flags & ich) ? mac_82559_D101M : nic->pdev->revision;
+ if(nic->mac == mac_unknown)
+ nic->mac = mac_82557_D100_A;
+
+ nic->params.rfds = rfds;
+ nic->params.cbs = cbs;
+
+ /* Quadwords to DMA into FIFO before starting frame transmit */
+ nic->tx_threshold = 0xE0;
+
+ /* no interrupt for every tx completion, delay = 256us if not 557 */
+ nic->tx_command = cpu_to_le16(cb_tx | cb_tx_sf |
+ ((nic->mac >= mac_82558_D101_A4) ? cb_cid : cb_i));
+
+ /* Template for a freshly allocated RFD */
+ nic->blank_rfd.command = 0;
+ nic->blank_rfd.rbd = cpu_to_le32(0xFFFFFFFF);
+ nic->blank_rfd.size = cpu_to_le16(VLAN_ETH_FRAME_LEN);
+
+ /* MII setup */
+ nic->mii.phy_id_mask = 0x1F;
+ nic->mii.reg_num_mask = 0x1F;
+ nic->mii.dev = nic->netdev;
+ nic->mii.mdio_read = mdio_read;
+ nic->mii.mdio_write = mdio_write;
+}
+
+static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
+{
+ struct config *config = &cb->u.config;
+ u8 *c = (u8 *)config;
+
+ cb->command = cpu_to_le16(cb_config);
+
+ memset(config, 0, sizeof(struct config));
+
+ config->byte_count = 0x16; /* bytes in this struct */
+ config->rx_fifo_limit = 0x8; /* bytes in FIFO before DMA */
+ config->direct_rx_dma = 0x1; /* reserved */
+ config->standard_tcb = 0x1; /* 1=standard, 0=extended */
+ config->standard_stat_counter = 0x1; /* 1=standard, 0=extended */
+ config->rx_discard_short_frames = 0x1; /* 1=discard, 0=pass */
+ config->tx_underrun_retry = 0x3; /* # of underrun retries */
+ config->mii_mode = 0x1; /* 1=MII mode, 0=503 mode */
+ config->pad10 = 0x6;
+ config->no_source_addr_insertion = 0x1; /* 1=no, 0=yes */
+ config->preamble_length = 0x2; /* 0=1, 1=3, 2=7, 3=15 bytes */
+ config->ifs = 0x6; /* x16 = inter frame spacing */
+ config->ip_addr_hi = 0xF2; /* ARP IP filter - not used */
+ config->pad15_1 = 0x1;
+ config->pad15_2 = 0x1;
+ config->crs_or_cdt = 0x0; /* 0=CRS only, 1=CRS or CDT */
+ config->fc_delay_hi = 0x40; /* time delay for fc frame */
+ config->tx_padding = 0x1; /* 1=pad short frames */
+ config->fc_priority_threshold = 0x7; /* 7=priority fc disabled */
+ config->pad18 = 0x1;
+ config->full_duplex_pin = 0x1; /* 1=examine FDX# pin */
+ config->pad20_1 = 0x1F;
+ config->fc_priority_location = 0x1; /* 1=byte#31, 0=byte#19 */
+ config->pad21_1 = 0x5;
+
+ config->adaptive_ifs = nic->adaptive_ifs;
+ config->loopback = nic->loopback;
+
+ if(nic->mii.force_media && nic->mii.full_duplex)
+ config->full_duplex_force = 0x1; /* 1=force, 0=auto */
+
+ if(nic->flags & promiscuous || nic->loopback) {
+ config->rx_save_bad_frames = 0x1; /* 1=save, 0=discard */
+ config->rx_discard_short_frames = 0x0; /* 1=discard, 0=save */
+ config->promiscuous_mode = 0x1; /* 1=on, 0=off */
+ }
+
+ if(nic->flags & multicast_all)
+ config->multicast_all = 0x1; /* 1=accept, 0=no */
+
+ /* disable WoL when up */
+ if(netif_running(nic->netdev) || !(nic->flags & wol_magic))
+ config->magic_packet_disable = 0x1; /* 1=off, 0=on */
+
+ if(nic->mac >= mac_82558_D101_A4) {
+ config->fc_disable = 0x1; /* 1=Tx fc off, 0=Tx fc on */
+ config->mwi_enable = 0x1; /* 1=enable, 0=disable */
+ config->standard_tcb = 0x0; /* 1=standard, 0=extended */
+ config->rx_long_ok = 0x1; /* 1=VLANs ok, 0=standard */
+ if (nic->mac >= mac_82559_D101M) {
+ config->tno_intr = 0x1; /* TCO stats enable */
+ /* Enable TCO in extended config */
+ if (nic->mac >= mac_82551_10) {
+ config->byte_count = 0x20; /* extended bytes */
+ config->rx_d102_mode = 0x1; /* GMRC for TCO */
+ }
+ } else {
+ config->standard_stat_counter = 0x0;
+ }
+ }
+
+ DPRINTK(HW, DEBUG, "[00-07]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
+ c[0], c[1], c[2], c[3], c[4], c[5], c[6], c[7]);
+ DPRINTK(HW, DEBUG, "[08-15]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
+ c[8], c[9], c[10], c[11], c[12], c[13], c[14], c[15]);
+ DPRINTK(HW, DEBUG, "[16-23]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
+ c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]);
+}
+
+/********************************************************/
+/* Micro code for 8086:1229 Rev 8 */
+/********************************************************/
+
+/* Parameter values for the D101M B-step */
+#define D101M_CPUSAVER_TIMER_DWORD 78
+#define D101M_CPUSAVER_BUNDLE_DWORD 65
+#define D101M_CPUSAVER_MIN_SIZE_DWORD 126
+
+#define D101M_B_RCVBUNDLE_UCODE \
+{\
+0x00550215, 0xFFFF0437, 0xFFFFFFFF, 0x06A70789, 0xFFFFFFFF, 0x0558FFFF, \
+0x000C0001, 0x00101312, 0x000C0008, 0x00380216, \
+0x0010009C, 0x00204056, 0x002380CC, 0x00380056, \
+0x0010009C, 0x00244C0B, 0x00000800, 0x00124818, \
+0x00380438, 0x00000000, 0x00140000, 0x00380555, \
+0x00308000, 0x00100662, 0x00100561, 0x000E0408, \
+0x00134861, 0x000C0002, 0x00103093, 0x00308000, \
+0x00100624, 0x00100561, 0x000E0408, 0x00100861, \
+0x000C007E, 0x00222C21, 0x000C0002, 0x00103093, \
+0x00380C7A, 0x00080000, 0x00103090, 0x00380C7A, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x0010009C, 0x00244C2D, 0x00010004, 0x00041000, \
+0x003A0437, 0x00044010, 0x0038078A, 0x00000000, \
+0x00100099, 0x00206C7A, 0x0010009C, 0x00244C48, \
+0x00130824, 0x000C0001, 0x00101213, 0x00260C75, \
+0x00041000, 0x00010004, 0x00130826, 0x000C0006, \
+0x002206A8, 0x0013C926, 0x00101313, 0x003806A8, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00080600, 0x00101B10, 0x00050004, 0x00100826, \
+0x00101210, 0x00380C34, 0x00000000, 0x00000000, \
+0x0021155B, 0x00100099, 0x00206559, 0x0010009C, \
+0x00244559, 0x00130836, 0x000C0000, 0x00220C62, \
+0x000C0001, 0x00101B13, 0x00229C0E, 0x00210C0E, \
+0x00226C0E, 0x00216C0E, 0x0022FC0E, 0x00215C0E, \
+0x00214C0E, 0x00380555, 0x00010004, 0x00041000, \
+0x00278C67, 0x00040800, 0x00018100, 0x003A0437, \
+0x00130826, 0x000C0001, 0x00220559, 0x00101313, \
+0x00380559, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00130831, 0x0010090B, 0x00124813, \
+0x000CFF80, 0x002606AB, 0x00041000, 0x00010004, \
+0x003806A8, 0x00000000, 0x00000000, 0x00000000, \
+}
+
+/********************************************************/
+/* Micro code for 8086:1229 Rev 9 */
+/********************************************************/
+
+/* Parameter values for the D101S */
+#define D101S_CPUSAVER_TIMER_DWORD 78
+#define D101S_CPUSAVER_BUNDLE_DWORD 67
+#define D101S_CPUSAVER_MIN_SIZE_DWORD 128
+
+#define D101S_RCVBUNDLE_UCODE \
+{\
+0x00550242, 0xFFFF047E, 0xFFFFFFFF, 0x06FF0818, 0xFFFFFFFF, 0x05A6FFFF, \
+0x000C0001, 0x00101312, 0x000C0008, 0x00380243, \
+0x0010009C, 0x00204056, 0x002380D0, 0x00380056, \
+0x0010009C, 0x00244F8B, 0x00000800, 0x00124818, \
+0x0038047F, 0x00000000, 0x00140000, 0x003805A3, \
+0x00308000, 0x00100610, 0x00100561, 0x000E0408, \
+0x00134861, 0x000C0002, 0x00103093, 0x00308000, \
+0x00100624, 0x00100561, 0x000E0408, 0x00100861, \
+0x000C007E, 0x00222FA1, 0x000C0002, 0x00103093, \
+0x00380F90, 0x00080000, 0x00103090, 0x00380F90, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x0010009C, 0x00244FAD, 0x00010004, 0x00041000, \
+0x003A047E, 0x00044010, 0x00380819, 0x00000000, \
+0x00100099, 0x00206FFD, 0x0010009A, 0x0020AFFD, \
+0x0010009C, 0x00244FC8, 0x00130824, 0x000C0001, \
+0x00101213, 0x00260FF7, 0x00041000, 0x00010004, \
+0x00130826, 0x000C0006, 0x00220700, 0x0013C926, \
+0x00101313, 0x00380700, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00080600, 0x00101B10, 0x00050004, 0x00100826, \
+0x00101210, 0x00380FB6, 0x00000000, 0x00000000, \
+0x002115A9, 0x00100099, 0x002065A7, 0x0010009A, \
+0x0020A5A7, 0x0010009C, 0x002445A7, 0x00130836, \
+0x000C0000, 0x00220FE4, 0x000C0001, 0x00101B13, \
+0x00229F8E, 0x00210F8E, 0x00226F8E, 0x00216F8E, \
+0x0022FF8E, 0x00215F8E, 0x00214F8E, 0x003805A3, \
+0x00010004, 0x00041000, 0x00278FE9, 0x00040800, \
+0x00018100, 0x003A047E, 0x00130826, 0x000C0001, \
+0x002205A7, 0x00101313, 0x003805A7, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00130831, \
+0x0010090B, 0x00124813, 0x000CFF80, 0x00260703, \
+0x00041000, 0x00010004, 0x00380700 \
+}
+
+/********************************************************/
+/* Micro code for the 8086:1229 Rev F/10 */
+/********************************************************/
+
+/* Parameter values for the D102 E-step */
+#define D102_E_CPUSAVER_TIMER_DWORD 42
+#define D102_E_CPUSAVER_BUNDLE_DWORD 54
+#define D102_E_CPUSAVER_MIN_SIZE_DWORD 46
+
+#define D102_E_RCVBUNDLE_UCODE \
+{\
+0x007D028F, 0x0E4204F9, 0x14ED0C85, 0x14FA14E9, 0x0EF70E36, 0x1FFF1FFF, \
+0x00E014B9, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014BD, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014D5, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014C1, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014C8, 0x00000000, 0x00000000, 0x00000000, \
+0x00200600, 0x00E014EE, 0x00000000, 0x00000000, \
+0x0030FF80, 0x00940E46, 0x00038200, 0x00102000, \
+0x00E00E43, 0x00000000, 0x00000000, 0x00000000, \
+0x00300006, 0x00E014FB, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000, \
+0x00906EFD, 0x00900EFD, 0x00E00EF8, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+}
+
+static void e100_setup_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb)
+{
+/* *INDENT-OFF* */
+ static struct {
+ u32 ucode[UCODE_SIZE + 1];
+ u8 mac;
+ u8 timer_dword;
+ u8 bundle_dword;
+ u8 min_size_dword;
+ } ucode_opts[] = {
+ { D101M_B_RCVBUNDLE_UCODE,
+ mac_82559_D101M,
+ D101M_CPUSAVER_TIMER_DWORD,
+ D101M_CPUSAVER_BUNDLE_DWORD,
+ D101M_CPUSAVER_MIN_SIZE_DWORD },
+ { D101S_RCVBUNDLE_UCODE,
+ mac_82559_D101S,
+ D101S_CPUSAVER_TIMER_DWORD,
+ D101S_CPUSAVER_BUNDLE_DWORD,
+ D101S_CPUSAVER_MIN_SIZE_DWORD },
+ { D102_E_RCVBUNDLE_UCODE,
+ mac_82551_F,
+ D102_E_CPUSAVER_TIMER_DWORD,
+ D102_E_CPUSAVER_BUNDLE_DWORD,
+ D102_E_CPUSAVER_MIN_SIZE_DWORD },
+ { D102_E_RCVBUNDLE_UCODE,
+ mac_82551_10,
+ D102_E_CPUSAVER_TIMER_DWORD,
+ D102_E_CPUSAVER_BUNDLE_DWORD,
+ D102_E_CPUSAVER_MIN_SIZE_DWORD },
+ { {0}, 0, 0, 0, 0}
+ }, *opts;
+/* *INDENT-ON* */
+
+/*************************************************************************
+* CPUSaver parameters
+*
+* All CPUSaver parameters are 16-bit literals that are part of a
+* "move immediate value" instruction. By changing the value of
+* the literal in the instruction before the code is loaded, the
+* driver can change the algorithm.
+*
+* INTDELAY - This loads the dead-man timer with its initial value.
+* When this timer expires the interrupt is asserted, and the
+* timer is reset each time a new packet is received. (see
+* BUNDLEMAX below to set the limit on number of chained packets)
+* The current default is 0x600 or 1536. Experiments show that
+* the value should probably stay within the 0x200 - 0x1000.
+*
+* BUNDLEMAX -
+* This sets the maximum number of frames that will be bundled. In
+* some situations, such as the TCP windowing algorithm, it may be
+* better to limit the growth of the bundle size than let it go as
+* high as it can, because that could cause too much added latency.
+* The default is six, because this is the number of packets in the
+* default TCP window size. A value of 1 would make CPUSaver indicate
+* an interrupt for every frame received. If you do not want to put
+* a limit on the bundle size, set this value to xFFFF.
+*
+* BUNDLESMALL -
+* This contains a bit-mask describing the minimum size frame that
+* will be bundled. The default masks the lower 7 bits, which means
+* that any frame less than 128 bytes in length will not be bundled,
+* but will instead immediately generate an interrupt. This does
+* not affect the current bundle in any way. Any frame that is 128
+* bytes or large will be bundled normally. This feature is meant
+* to provide immediate indication of ACK frames in a TCP environment.
+* Customers were seeing poor performance when a machine with CPUSaver
+* enabled was sending but not receiving. The delay introduced when
+* the ACKs were received was enough to reduce total throughput, because
+* the sender would sit idle until the ACK was finally seen.
+*
+* The current default is 0xFF80, which masks out the lower 7 bits.
+* This means that any frame which is x7F (127) bytes or smaller
+* will cause an immediate interrupt. Because this value must be a
+* bit mask, there are only a few valid values that can be used. To
+* turn this feature off, the driver can write the value xFFFF to the
+* lower word of this instruction (in the same way that the other
+* parameters are used). Likewise, a value of 0xF800 (2047) would
+* cause an interrupt to be generated for every frame, because all
+* standard Ethernet frames are <= 2047 bytes in length.
+*************************************************************************/
+
+/* if you wish to disable the ucode functionality, while maintaining the
+ * workarounds it provides, set the following defines to:
+ * BUNDLESMALL 0
+ * BUNDLEMAX 1
+ * INTDELAY 1
+ */
+#define BUNDLESMALL 1
+#define BUNDLEMAX (u16)6
+#define INTDELAY (u16)1536 /* 0x600 */
+
+ /* do not load u-code for ICH devices */
+ if (nic->flags & ich)
+ goto noloaducode;
+
+ /* Search for ucode match against h/w revision */
+ for (opts = ucode_opts; opts->mac; opts++) {
+ int i;
+ u32 *ucode = opts->ucode;
+ if (nic->mac != opts->mac)
+ continue;
+
+ /* Insert user-tunable settings */
+ ucode[opts->timer_dword] &= 0xFFFF0000;
+ ucode[opts->timer_dword] |= INTDELAY;
+ ucode[opts->bundle_dword] &= 0xFFFF0000;
+ ucode[opts->bundle_dword] |= BUNDLEMAX;
+ ucode[opts->min_size_dword] &= 0xFFFF0000;
+ ucode[opts->min_size_dword] |= (BUNDLESMALL) ? 0xFFFF : 0xFF80;
+
+ for (i = 0; i < UCODE_SIZE; i++)
+ cb->u.ucode[i] = cpu_to_le32(ucode[i]);
+ cb->command = cpu_to_le16(cb_ucode | cb_el);
+ return;
+ }
+
+noloaducode:
+ cb->command = cpu_to_le16(cb_nop | cb_el);
+}
+
+static inline int e100_exec_cb_wait(struct nic *nic, struct sk_buff *skb,
+ void (*cb_prepare)(struct nic *, struct cb *, struct sk_buff *))
+{
+ int err = 0, counter = 50;
+ struct cb *cb = nic->cb_to_clean;
+
+ if ((err = e100_exec_cb(nic, NULL, e100_setup_ucode)))
+ DPRINTK(PROBE,ERR, "ucode cmd failed with error %d\n", err);
+
+ /* must restart cuc */
+ nic->cuc_cmd = cuc_start;
+
+ /* wait for completion */
+ e100_write_flush(nic);
+ udelay(10);
+
+ /* wait for possibly (ouch) 500ms */
+ while (!(cb->status & cpu_to_le16(cb_complete))) {
+ msleep(10);
+ if (!--counter) break;
+ }
+
+ /* ack any interrupts, something could have been set */
+ iowrite8(~0, &nic->csr->scb.stat_ack);
+
+ /* if the command failed, or is not OK, notify and return */
+ if (!counter || !(cb->status & cpu_to_le16(cb_ok))) {
+ DPRINTK(PROBE,ERR, "ucode load failed\n");
+ err = -EPERM;
+ }
+
+ return err;
+}
+
+static void e100_setup_iaaddr(struct nic *nic, struct cb *cb,
+ struct sk_buff *skb)
+{
+ cb->command = cpu_to_le16(cb_iaaddr);
+ memcpy(cb->u.iaaddr, nic->netdev->dev_addr, ETH_ALEN);
+}
+
+static void e100_dump(struct nic *nic, struct cb *cb, struct sk_buff *skb)
+{
+ cb->command = cpu_to_le16(cb_dump);
+ cb->u.dump_buffer_addr = cpu_to_le32(nic->dma_addr +
+ offsetof(struct mem, dump_buf));
+}
+
+#define NCONFIG_AUTO_SWITCH 0x0080
+#define MII_NSC_CONG MII_RESV1
+#define NSC_CONG_ENABLE 0x0100
+#define NSC_CONG_TXREADY 0x0400
+#define ADVERTISE_FC_SUPPORTED 0x0400
+static int e100_phy_init(struct nic *nic)
+{
+ struct net_device *netdev = nic->netdev;
+ u32 addr;
+ u16 bmcr, stat, id_lo, id_hi, cong;
+
+ /* Discover phy addr by searching addrs in order {1,0,2,..., 31} */
+ for(addr = 0; addr < 32; addr++) {
+ nic->mii.phy_id = (addr == 0) ? 1 : (addr == 1) ? 0 : addr;
+ bmcr = mdio_read(netdev, nic->mii.phy_id, MII_BMCR);
+ stat = mdio_read(netdev, nic->mii.phy_id, MII_BMSR);
+ stat = mdio_read(netdev, nic->mii.phy_id, MII_BMSR);
+ if(!((bmcr == 0xFFFF) || ((stat == 0) && (bmcr == 0))))
+ break;
+ }
+ DPRINTK(HW, DEBUG, "phy_addr = %d\n", nic->mii.phy_id);
+ if(addr == 32)
+ return -EAGAIN;
+
+ /* Selected the phy and isolate the rest */
+ for(addr = 0; addr < 32; addr++) {
+ if(addr != nic->mii.phy_id) {
+ mdio_write(netdev, addr, MII_BMCR, BMCR_ISOLATE);
+ } else {
+ bmcr = mdio_read(netdev, addr, MII_BMCR);
+ mdio_write(netdev, addr, MII_BMCR,
+ bmcr & ~BMCR_ISOLATE);
+ }
+ }
+
+ /* Get phy ID */
+ id_lo = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID1);
+ id_hi = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID2);
+ nic->phy = (u32)id_hi << 16 | (u32)id_lo;
+ DPRINTK(HW, DEBUG, "phy ID = 0x%08X\n", nic->phy);
+
+ /* Handle National tx phys */
+#define NCS_PHY_MODEL_MASK 0xFFF0FFFF
+ if((nic->phy & NCS_PHY_MODEL_MASK) == phy_nsc_tx) {
+ /* Disable congestion control */
+ cong = mdio_read(netdev, nic->mii.phy_id, MII_NSC_CONG);
+ cong |= NSC_CONG_TXREADY;
+ cong &= ~NSC_CONG_ENABLE;
+ mdio_write(netdev, nic->mii.phy_id, MII_NSC_CONG, cong);
+ }
+
+ if((nic->mac >= mac_82550_D102) || ((nic->flags & ich) &&
+ (mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000) &&
+ !(nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled))) {
+ /* enable/disable MDI/MDI-X auto-switching. */
+ mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG,
+ nic->mii.force_media ? 0 : NCONFIG_AUTO_SWITCH);
+ }
+
+ return 0;
+}
+
+static int e100_hw_init(struct nic *nic)
+{
+ int err;
+
+ e100_hw_reset(nic);
+
+ DPRINTK(HW, ERR, "e100_hw_init\n");
+ if(!in_interrupt() && (err = e100_self_test(nic)))
+ return err;
+
+ if((err = e100_phy_init(nic)))
+ return err;
+ if((err = e100_exec_cmd(nic, cuc_load_base, 0)))
+ return err;
+ if((err = e100_exec_cmd(nic, ruc_load_base, 0)))
+ return err;
+ if ((err = e100_exec_cb_wait(nic, NULL, e100_setup_ucode)))
+ return err;
+ if((err = e100_exec_cb(nic, NULL, e100_configure)))
+ return err;
+ if((err = e100_exec_cb(nic, NULL, e100_setup_iaaddr)))
+ return err;
+ if((err = e100_exec_cmd(nic, cuc_dump_addr,
+ nic->dma_addr + offsetof(struct mem, stats))))
+ return err;
+ if((err = e100_exec_cmd(nic, cuc_dump_reset, 0)))
+ return err;
+
+ e100_disable_irq(nic);
+
+ return 0;
+}
+
+static void e100_multi(struct nic *nic, struct cb *cb, struct sk_buff *skb)
+{
+ struct net_device *netdev = nic->netdev;
+ struct dev_mc_list *list = netdev->mc_list;
+ u16 i, count = min(netdev->mc_count, E100_MAX_MULTICAST_ADDRS);
+
+ cb->command = cpu_to_le16(cb_multi);
+ cb->u.multi.count = cpu_to_le16(count * ETH_ALEN);
+ for(i = 0; list && i < count; i++, list = list->next)
+ memcpy(&cb->u.multi.addr[i*ETH_ALEN], &list->dmi_addr,
+ ETH_ALEN);
+}
+
+static void e100_set_multicast_list(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ DPRINTK(HW, DEBUG, "mc_count=%d, flags=0x%04X\n",
+ netdev->mc_count, netdev->flags);
+
+ if(netdev->flags & IFF_PROMISC)
+ nic->flags |= promiscuous;
+ else
+ nic->flags &= ~promiscuous;
+
+ if(netdev->flags & IFF_ALLMULTI ||
+ netdev->mc_count > E100_MAX_MULTICAST_ADDRS)
+ nic->flags |= multicast_all;
+ else
+ nic->flags &= ~multicast_all;
+
+ e100_exec_cb(nic, NULL, e100_configure);
+ e100_exec_cb(nic, NULL, e100_multi);
+}
+
+static void e100_update_stats(struct nic *nic)
+{
+ struct net_device *dev = nic->netdev;
+ struct net_device_stats *ns = &dev->stats;
+ struct stats *s = &nic->mem->stats;
+ __le32 *complete = (nic->mac < mac_82558_D101_A4) ? &s->fc_xmt_pause :
+ (nic->mac < mac_82559_D101M) ? (__le32 *)&s->xmt_tco_frames :
+ &s->complete;
+
+ /* Device's stats reporting may take several microseconds to
+ * complete, so we're always waiting for results of the
+ * previous command. */
+
+ if(*complete == cpu_to_le32(cuc_dump_reset_complete)) {
+ *complete = 0;
+ nic->tx_frames = le32_to_cpu(s->tx_good_frames);
+ nic->tx_collisions = le32_to_cpu(s->tx_total_collisions);
+ ns->tx_aborted_errors += le32_to_cpu(s->tx_max_collisions);
+ ns->tx_window_errors += le32_to_cpu(s->tx_late_collisions);
+ ns->tx_carrier_errors += le32_to_cpu(s->tx_lost_crs);
+ ns->tx_fifo_errors += le32_to_cpu(s->tx_underruns);
+ ns->collisions += nic->tx_collisions;
+ ns->tx_errors += le32_to_cpu(s->tx_max_collisions) +
+ le32_to_cpu(s->tx_lost_crs);
+ ns->rx_length_errors += le32_to_cpu(s->rx_short_frame_errors) +
+ nic->rx_over_length_errors;
+ ns->rx_crc_errors += le32_to_cpu(s->rx_crc_errors);
+ ns->rx_frame_errors += le32_to_cpu(s->rx_alignment_errors);
+ ns->rx_over_errors += le32_to_cpu(s->rx_overrun_errors);
+ ns->rx_fifo_errors += le32_to_cpu(s->rx_overrun_errors);
+ ns->rx_missed_errors += le32_to_cpu(s->rx_resource_errors);
+ ns->rx_errors += le32_to_cpu(s->rx_crc_errors) +
+ le32_to_cpu(s->rx_alignment_errors) +
+ le32_to_cpu(s->rx_short_frame_errors) +
+ le32_to_cpu(s->rx_cdt_errors);
+ nic->tx_deferred += le32_to_cpu(s->tx_deferred);
+ nic->tx_single_collisions +=
+ le32_to_cpu(s->tx_single_collisions);
+ nic->tx_multiple_collisions +=
+ le32_to_cpu(s->tx_multiple_collisions);
+ if(nic->mac >= mac_82558_D101_A4) {
+ nic->tx_fc_pause += le32_to_cpu(s->fc_xmt_pause);
+ nic->rx_fc_pause += le32_to_cpu(s->fc_rcv_pause);
+ nic->rx_fc_unsupported +=
+ le32_to_cpu(s->fc_rcv_unsupported);
+ if(nic->mac >= mac_82559_D101M) {
+ nic->tx_tco_frames +=
+ le16_to_cpu(s->xmt_tco_frames);
+ nic->rx_tco_frames +=
+ le16_to_cpu(s->rcv_tco_frames);
+ }
+ }
+ }
+
+
+ if(e100_exec_cmd(nic, cuc_dump_reset, 0))
+ DPRINTK(TX_ERR, DEBUG, "exec cuc_dump_reset failed\n");
+}
+
+static void e100_adjust_adaptive_ifs(struct nic *nic, int speed, int duplex)
+{
+ /* Adjust inter-frame-spacing (IFS) between two transmits if
+ * we're getting collisions on a half-duplex connection. */
+
+ if(duplex == DUPLEX_HALF) {
+ u32 prev = nic->adaptive_ifs;
+ u32 min_frames = (speed == SPEED_100) ? 1000 : 100;
+
+ if((nic->tx_frames / 32 < nic->tx_collisions) &&
+ (nic->tx_frames > min_frames)) {
+ if(nic->adaptive_ifs < 60)
+ nic->adaptive_ifs += 5;
+ } else if (nic->tx_frames < min_frames) {
+ if(nic->adaptive_ifs >= 5)
+ nic->adaptive_ifs -= 5;
+ }
+ if(nic->adaptive_ifs != prev)
+ e100_exec_cb(nic, NULL, e100_configure);
+ }
+}
+
+static void e100_watchdog(unsigned long data)
+{
+ struct nic *nic = (struct nic *)data;
+ struct ethtool_cmd cmd;
+
+ DPRINTK(TIMER, DEBUG, "right now = %ld\n", jiffies);
+
+ /* mii library handles link maintenance tasks */
+
+ mii_ethtool_gset(&nic->mii, &cmd);
+
+ if(mii_link_ok(&nic->mii) && !netif_carrier_ok(nic->netdev)) {
+ DPRINTK(LINK, INFO, "link up, %sMbps, %s-duplex\n",
+ cmd.speed == SPEED_100 ? "100" : "10",
+ cmd.duplex == DUPLEX_FULL ? "full" : "half");
+ } else if(!mii_link_ok(&nic->mii) && netif_carrier_ok(nic->netdev)) {
+ DPRINTK(LINK, INFO, "link down\n");
+ }
+
+ mii_check_link(&nic->mii);
+
+ /* Software generated interrupt to recover from (rare) Rx
+ * allocation failure.
+ * Unfortunately have to use a spinlock to not re-enable interrupts
+ * accidentally, due to hardware that shares a register between the
+ * interrupt mask bit and the SW Interrupt generation bit */
+ spin_lock_irq(&nic->cmd_lock);
+ iowrite8(ioread8(&nic->csr->scb.cmd_hi) | irq_sw_gen,&nic->csr->scb.cmd_hi);
+ e100_write_flush(nic);
+ spin_unlock_irq(&nic->cmd_lock);
+
+ e100_update_stats(nic);
+ e100_adjust_adaptive_ifs(nic, cmd.speed, cmd.duplex);
+
+ if(nic->mac <= mac_82557_D100_C)
+ /* Issue a multicast command to workaround a 557 lock up */
+ e100_set_multicast_list(nic->netdev);
+
+ if(nic->flags & ich && cmd.speed==SPEED_10 && cmd.duplex==DUPLEX_HALF)
+ /* Need SW workaround for ICH[x] 10Mbps/half duplex Tx hang. */
+ nic->flags |= ich_10h_workaround;
+ else
+ nic->flags &= ~ich_10h_workaround;
+
+ mod_timer(&nic->watchdog,
+ round_jiffies(jiffies + E100_WATCHDOG_PERIOD));
+}
+
+static void e100_xmit_prepare(struct nic *nic, struct cb *cb,
+ struct sk_buff *skb)
+{
+ cb->command = nic->tx_command;
+ /* interrupt every 16 packets regardless of delay */
+ if((nic->cbs_avail & ~15) == nic->cbs_avail)
+ cb->command |= cpu_to_le16(cb_i);
+ cb->u.tcb.tbd_array = cb->dma_addr + offsetof(struct cb, u.tcb.tbd);
+ cb->u.tcb.tcb_byte_count = 0;
+ cb->u.tcb.threshold = nic->tx_threshold;
+ cb->u.tcb.tbd_count = 1;
+ cb->u.tcb.tbd.buf_addr = cpu_to_le32(pci_map_single(nic->pdev,
+ skb->data, skb->len, PCI_DMA_TODEVICE));
+ /* check for mapping failure? */
+ cb->u.tcb.tbd.size = cpu_to_le16(skb->len);
+}
+
+static int e100_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ int err;
+
+ if(nic->flags & ich_10h_workaround) {
+ /* SW workaround for ICH[x] 10Mbps/half duplex Tx hang.
+ Issue a NOP command followed by a 1us delay before
+ issuing the Tx command. */
+ if(e100_exec_cmd(nic, cuc_nop, 0))
+ DPRINTK(TX_ERR, DEBUG, "exec cuc_nop failed\n");
+ udelay(1);
+ }
+
+ err = e100_exec_cb(nic, skb, e100_xmit_prepare);
+
+ switch(err) {
+ case -ENOSPC:
+ /* We queued the skb, but now we're out of space. */
+ DPRINTK(TX_ERR, DEBUG, "No space for CB\n");
+ netif_stop_queue(netdev);
+ break;
+ case -ENOMEM:
+ /* This is a hard error - log it. */
+ DPRINTK(TX_ERR, DEBUG, "Out of Tx resources, returning skb\n");
+ netif_stop_queue(netdev);
+ return 1;
+ }
+
+ netdev->trans_start = jiffies;
+ return 0;
+}
+
+static int e100_tx_clean(struct nic *nic)
+{
+ struct net_device *dev = nic->netdev;
+ struct cb *cb;
+ int tx_cleaned = 0;
+
+ spin_lock(&nic->cb_lock);
+
+ /* Clean CBs marked complete */
+ for(cb = nic->cb_to_clean;
+ cb->status & cpu_to_le16(cb_complete);
+ cb = nic->cb_to_clean = cb->next) {
+ DPRINTK(TX_DONE, DEBUG, "cb[%d]->status = 0x%04X\n",
+ (int)(((void*)cb - (void*)nic->cbs)/sizeof(struct cb)),
+ cb->status);
+
+ if(likely(cb->skb != NULL)) {
+ dev->stats.tx_packets++;
+ dev->stats.tx_bytes += cb->skb->len;
+
+ pci_unmap_single(nic->pdev,
+ le32_to_cpu(cb->u.tcb.tbd.buf_addr),
+ le16_to_cpu(cb->u.tcb.tbd.size),
+ PCI_DMA_TODEVICE);
+ dev_kfree_skb_any(cb->skb);
+ cb->skb = NULL;
+ tx_cleaned = 1;
+ }
+ cb->status = 0;
+ nic->cbs_avail++;
+ }
+
+ spin_unlock(&nic->cb_lock);
+
+ /* Recover from running out of Tx resources in xmit_frame */
+ if(unlikely(tx_cleaned && netif_queue_stopped(nic->netdev)))
+ netif_wake_queue(nic->netdev);
+
+ return tx_cleaned;
+}
+
+static void e100_clean_cbs(struct nic *nic)
+{
+ if(nic->cbs) {
+ while(nic->cbs_avail != nic->params.cbs.count) {
+ struct cb *cb = nic->cb_to_clean;
+ if(cb->skb) {
+ pci_unmap_single(nic->pdev,
+ le32_to_cpu(cb->u.tcb.tbd.buf_addr),
+ le16_to_cpu(cb->u.tcb.tbd.size),
+ PCI_DMA_TODEVICE);
+ dev_kfree_skb(cb->skb);
+ }
+ nic->cb_to_clean = nic->cb_to_clean->next;
+ nic->cbs_avail++;
+ }
+ pci_free_consistent(nic->pdev,
+ sizeof(struct cb) * nic->params.cbs.count,
+ nic->cbs, nic->cbs_dma_addr);
+ nic->cbs = NULL;
+ nic->cbs_avail = 0;
+ }
+ nic->cuc_cmd = cuc_start;
+ nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean =
+ nic->cbs;
+}
+
+static int e100_alloc_cbs(struct nic *nic)
+{
+ struct cb *cb;
+ unsigned int i, count = nic->params.cbs.count;
+
+ nic->cuc_cmd = cuc_start;
+ nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean = NULL;
+ nic->cbs_avail = 0;
+
+ nic->cbs = pci_alloc_consistent(nic->pdev,
+ sizeof(struct cb) * count, &nic->cbs_dma_addr);
+ if(!nic->cbs)
+ return -ENOMEM;
+
+ for(cb = nic->cbs, i = 0; i < count; cb++, i++) {
+ cb->next = (i + 1 < count) ? cb + 1 : nic->cbs;
+ cb->prev = (i == 0) ? nic->cbs + count - 1 : cb - 1;
+
+ cb->dma_addr = nic->cbs_dma_addr + i * sizeof(struct cb);
+ cb->link = cpu_to_le32(nic->cbs_dma_addr +
+ ((i+1) % count) * sizeof(struct cb));
+ cb->skb = NULL;
+ }
+
+ nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean = nic->cbs;
+ nic->cbs_avail = count;
+
+ return 0;
+}
+
+static inline void e100_start_receiver(struct nic *nic, struct rx *rx)
+{
+ if(!nic->rxs) return;
+ if(RU_SUSPENDED != nic->ru_running) return;
+
+ /* handle init time starts */
+ if(!rx) rx = nic->rxs;
+
+ /* (Re)start RU if suspended or idle and RFA is non-NULL */
+ if(rx->skb) {
+ e100_exec_cmd(nic, ruc_start, rx->dma_addr);
+ nic->ru_running = RU_RUNNING;
+ }
+}
+
+#define RFD_BUF_LEN (sizeof(struct rfd) + VLAN_ETH_FRAME_LEN)
+static int e100_rx_alloc_skb(struct nic *nic, struct rx *rx)
+{
+ if(!(rx->skb = netdev_alloc_skb(nic->netdev, RFD_BUF_LEN + NET_IP_ALIGN)))
+ return -ENOMEM;
+
+ /* Align, init, and map the RFD. */
+ skb_reserve(rx->skb, NET_IP_ALIGN);
+ skb_copy_to_linear_data(rx->skb, &nic->blank_rfd, sizeof(struct rfd));
+ rx->dma_addr = pci_map_single(nic->pdev, rx->skb->data,
+ RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
+
+ if (pci_dma_mapping_error(nic->pdev, rx->dma_addr)) {
+ dev_kfree_skb_any(rx->skb);
+ rx->skb = NULL;
+ rx->dma_addr = 0;
+ return -ENOMEM;
+ }
+
+ /* Link the RFD to end of RFA by linking previous RFD to
+ * this one. We are safe to touch the previous RFD because
+ * it is protected by the before last buffer's el bit being set */
+ if (rx->prev->skb) {
+ struct rfd *prev_rfd = (struct rfd *)rx->prev->skb->data;
+ put_unaligned_le32(rx->dma_addr, &prev_rfd->link);
+ pci_dma_sync_single_for_device(nic->pdev, rx->prev->dma_addr,
+ sizeof(struct rfd), PCI_DMA_TODEVICE);
+ }
+
+ return 0;
+}
+
+static int e100_rx_indicate(struct nic *nic, struct rx *rx,
+ unsigned int *work_done, unsigned int work_to_do)
+{
+ struct net_device *dev = nic->netdev;
+ struct sk_buff *skb = rx->skb;
+ struct rfd *rfd = (struct rfd *)skb->data;
+ u16 rfd_status, actual_size;
+
+ if(unlikely(work_done && *work_done >= work_to_do))
+ return -EAGAIN;
+
+ /* Need to sync before taking a peek at cb_complete bit */
+ pci_dma_sync_single_for_cpu(nic->pdev, rx->dma_addr,
+ sizeof(struct rfd), PCI_DMA_FROMDEVICE);
+ rfd_status = le16_to_cpu(rfd->status);
+
+ DPRINTK(RX_STATUS, DEBUG, "status=0x%04X\n", rfd_status);
+
+ /* If data isn't ready, nothing to indicate */
+ if (unlikely(!(rfd_status & cb_complete))) {
+ /* If the next buffer has the el bit, but we think the receiver
+ * is still running, check to see if it really stopped while
+ * we had interrupts off.
+ * This allows for a fast restart without re-enabling
+ * interrupts */
+ if ((le16_to_cpu(rfd->command) & cb_el) &&
+ (RU_RUNNING == nic->ru_running))
+
+ if (ioread8(&nic->csr->scb.status) & rus_no_res)
+ nic->ru_running = RU_SUSPENDED;
+ pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr,
+ sizeof(struct rfd),
+ PCI_DMA_BIDIRECTIONAL);
+ return -ENODATA;
+ }
+
+ /* Get actual data size */
+ actual_size = le16_to_cpu(rfd->actual_size) & 0x3FFF;
+ if(unlikely(actual_size > RFD_BUF_LEN - sizeof(struct rfd)))
+ actual_size = RFD_BUF_LEN - sizeof(struct rfd);
+
+ /* Get data */
+ pci_unmap_single(nic->pdev, rx->dma_addr,
+ RFD_BUF_LEN, PCI_DMA_FROMDEVICE);
+
+ /* If this buffer has the el bit, but we think the receiver
+ * is still running, check to see if it really stopped while
+ * we had interrupts off.
+ * This allows for a fast restart without re-enabling interrupts.
+ * This can happen when the RU sees the size change but also sees
+ * the el bit set. */
+ if ((le16_to_cpu(rfd->command) & cb_el) &&
+ (RU_RUNNING == nic->ru_running)) {
+
+ if (ioread8(&nic->csr->scb.status) & rus_no_res)
+ nic->ru_running = RU_SUSPENDED;
+ }
+
+ /* Pull off the RFD and put the actual data (minus eth hdr) */
+ skb_reserve(skb, sizeof(struct rfd));
+ skb_put(skb, actual_size);
+ skb->protocol = eth_type_trans(skb, nic->netdev);
+
+ if(unlikely(!(rfd_status & cb_ok))) {
+ /* Don't indicate if hardware indicates errors */
+ dev_kfree_skb_any(skb);
+ } else if(actual_size > ETH_DATA_LEN + VLAN_ETH_HLEN) {
+ /* Don't indicate oversized frames */
+ nic->rx_over_length_errors++;
+ dev_kfree_skb_any(skb);
+ } else {
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += actual_size;
+ nic->netdev->last_rx = jiffies;
+ netif_receive_skb(skb);
+ if(work_done)
+ (*work_done)++;
+ }
+
+ rx->skb = NULL;
+
+ return 0;
+}
+
+static void e100_rx_clean(struct nic *nic, unsigned int *work_done,
+ unsigned int work_to_do)
+{
+ struct rx *rx;
+ int restart_required = 0, err = 0;
+ struct rx *old_before_last_rx, *new_before_last_rx;
+ struct rfd *old_before_last_rfd, *new_before_last_rfd;
+
+ /* Indicate newly arrived packets */
+ for(rx = nic->rx_to_clean; rx->skb; rx = nic->rx_to_clean = rx->next) {
+ err = e100_rx_indicate(nic, rx, work_done, work_to_do);
+ /* Hit quota or no more to clean */
+ if (-EAGAIN == err || -ENODATA == err)
+ break;
+ }
+
+
+ /* On EAGAIN, hit quota so have more work to do, restart once
+ * cleanup is complete.
+ * Else, are we already rnr? then pay attention!!! this ensures that
+ * the state machine progression never allows a start with a
+ * partially cleaned list, avoiding a race between hardware
+ * and rx_to_clean when in NAPI mode */
+ if (-EAGAIN != err && RU_SUSPENDED == nic->ru_running)
+ restart_required = 1;
+
+ old_before_last_rx = nic->rx_to_use->prev->prev;
+ old_before_last_rfd = (struct rfd *)old_before_last_rx->skb->data;
+
+ /* Alloc new skbs to refill list */
+ for(rx = nic->rx_to_use; !rx->skb; rx = nic->rx_to_use = rx->next) {
+ if(unlikely(e100_rx_alloc_skb(nic, rx)))
+ break; /* Better luck next time (see watchdog) */
+ }
+
+ new_before_last_rx = nic->rx_to_use->prev->prev;
+ if (new_before_last_rx != old_before_last_rx) {
+ /* Set the el-bit on the buffer that is before the last buffer.
+ * This lets us update the next pointer on the last buffer
+ * without worrying about hardware touching it.
+ * We set the size to 0 to prevent hardware from touching this
+ * buffer.
+ * When the hardware hits the before last buffer with el-bit
+ * and size of 0, it will RNR interrupt, the RUS will go into
+ * the No Resources state. It will not complete nor write to
+ * this buffer. */
+ new_before_last_rfd =
+ (struct rfd *)new_before_last_rx->skb->data;
+ new_before_last_rfd->size = 0;
+ new_before_last_rfd->command |= cpu_to_le16(cb_el);
+ pci_dma_sync_single_for_device(nic->pdev,
+ new_before_last_rx->dma_addr, sizeof(struct rfd),
+ PCI_DMA_TODEVICE);
+
+ /* Now that we have a new stopping point, we can clear the old
+ * stopping point. We must sync twice to get the proper
+ * ordering on the hardware side of things. */
+ old_before_last_rfd->command &= ~cpu_to_le16(cb_el);
+ pci_dma_sync_single_for_device(nic->pdev,
+ old_before_last_rx->dma_addr, sizeof(struct rfd),
+ PCI_DMA_TODEVICE);
+ old_before_last_rfd->size = cpu_to_le16(VLAN_ETH_FRAME_LEN);
+ pci_dma_sync_single_for_device(nic->pdev,
+ old_before_last_rx->dma_addr, sizeof(struct rfd),
+ PCI_DMA_TODEVICE);
+ }
+
+ if(restart_required) {
+ // ack the rnr?
+ iowrite8(stat_ack_rnr, &nic->csr->scb.stat_ack);
+ e100_start_receiver(nic, nic->rx_to_clean);
+ if(work_done)
+ (*work_done)++;
+ }
+}
+
+static void e100_rx_clean_list(struct nic *nic)
+{
+ struct rx *rx;
+ unsigned int i, count = nic->params.rfds.count;
+
+ nic->ru_running = RU_UNINITIALIZED;
+
+ if(nic->rxs) {
+ for(rx = nic->rxs, i = 0; i < count; rx++, i++) {
+ if(rx->skb) {
+ pci_unmap_single(nic->pdev, rx->dma_addr,
+ RFD_BUF_LEN, PCI_DMA_FROMDEVICE);
+ dev_kfree_skb(rx->skb);
+ }
+ }
+ kfree(nic->rxs);
+ nic->rxs = NULL;
+ }
+
+ nic->rx_to_use = nic->rx_to_clean = NULL;
+}
+
+static int e100_rx_alloc_list(struct nic *nic)
+{
+ struct rx *rx;
+ unsigned int i, count = nic->params.rfds.count;
+ struct rfd *before_last;
+
+ nic->rx_to_use = nic->rx_to_clean = NULL;
+ nic->ru_running = RU_UNINITIALIZED;
+
+ if(!(nic->rxs = kcalloc(count, sizeof(struct rx), GFP_ATOMIC)))
+ return -ENOMEM;
+
+ for(rx = nic->rxs, i = 0; i < count; rx++, i++) {
+ rx->next = (i + 1 < count) ? rx + 1 : nic->rxs;
+ rx->prev = (i == 0) ? nic->rxs + count - 1 : rx - 1;
+ if(e100_rx_alloc_skb(nic, rx)) {
+ e100_rx_clean_list(nic);
+ return -ENOMEM;
+ }
+ }
+ /* Set the el-bit on the buffer that is before the last buffer.
+ * This lets us update the next pointer on the last buffer without
+ * worrying about hardware touching it.
+ * We set the size to 0 to prevent hardware from touching this buffer.
+ * When the hardware hits the before last buffer with el-bit and size
+ * of 0, it will RNR interrupt, the RU will go into the No Resources
+ * state. It will not complete nor write to this buffer. */
+ rx = nic->rxs->prev->prev;
+ before_last = (struct rfd *)rx->skb->data;
+ before_last->command |= cpu_to_le16(cb_el);
+ before_last->size = 0;
+ pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr,
+ sizeof(struct rfd), PCI_DMA_TODEVICE);
+
+ nic->rx_to_use = nic->rx_to_clean = nic->rxs;
+ nic->ru_running = RU_SUSPENDED;
+
+ return 0;
+}
+
+static irqreturn_t e100_intr(int irq, void *dev_id)
+{
+ struct net_device *netdev = dev_id;
+ struct nic *nic = netdev_priv(netdev);
+ u8 stat_ack = ioread8(&nic->csr->scb.stat_ack);
+
+ DPRINTK(INTR, DEBUG, "stat_ack = 0x%02X\n", stat_ack);
+
+ if(stat_ack == stat_ack_not_ours || /* Not our interrupt */
+ stat_ack == stat_ack_not_present) /* Hardware is ejected */
+ return IRQ_NONE;
+
+ /* Ack interrupt(s) */
+ iowrite8(stat_ack, &nic->csr->scb.stat_ack);
+
+ /* We hit Receive No Resource (RNR); restart RU after cleaning */
+ if(stat_ack & stat_ack_rnr)
+ nic->ru_running = RU_SUSPENDED;
+
+ if(likely(netif_rx_schedule_prep(netdev, &nic->napi))) {
+ e100_disable_irq(nic);
+ __netif_rx_schedule(netdev, &nic->napi);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int e100_poll(struct napi_struct *napi, int budget)
+{
+ struct nic *nic = container_of(napi, struct nic, napi);
+ struct net_device *netdev = nic->netdev;
+ unsigned int work_done = 0;
+
+ e100_rx_clean(nic, &work_done, budget);
+ e100_tx_clean(nic);
+
+ /* If budget not fully consumed, exit the polling mode */
+ if (work_done < budget) {
+ netif_rx_complete(netdev, napi);
+ e100_enable_irq(nic);
+ }
+
+ return work_done;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void e100_netpoll(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ e100_disable_irq(nic);
+ e100_intr(nic->pdev->irq, netdev);
+ e100_tx_clean(nic);
+ e100_enable_irq(nic);
+}
+#endif
+
+static int e100_set_mac_address(struct net_device *netdev, void *p)
+{
+ struct nic *nic = netdev_priv(netdev);
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+ e100_exec_cb(nic, NULL, e100_setup_iaaddr);
+
+ return 0;
+}
+
+static int e100_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ if(new_mtu < ETH_ZLEN || new_mtu > ETH_DATA_LEN)
+ return -EINVAL;
+ netdev->mtu = new_mtu;
+ return 0;
+}
+
+static int e100_asf(struct nic *nic)
+{
+ /* ASF can be enabled from eeprom */
+ return((nic->pdev->device >= 0x1050) && (nic->pdev->device <= 0x1057) &&
+ (nic->eeprom[eeprom_config_asf] & eeprom_asf) &&
+ !(nic->eeprom[eeprom_config_asf] & eeprom_gcl) &&
+ ((nic->eeprom[eeprom_smbus_addr] & 0xFF) != 0xFE));
+}
+
+static int e100_up(struct nic *nic)
+{
+ int err;
+
+ if((err = e100_rx_alloc_list(nic)))
+ return err;
+ if((err = e100_alloc_cbs(nic)))
+ goto err_rx_clean_list;
+ if((err = e100_hw_init(nic)))
+ goto err_clean_cbs;
+ e100_set_multicast_list(nic->netdev);
+ e100_start_receiver(nic, NULL);
+ mod_timer(&nic->watchdog, jiffies);
+ if((err = request_irq(nic->pdev->irq, e100_intr, IRQF_SHARED,
+ nic->netdev->name, nic->netdev)))
+ goto err_no_irq;
+ netif_wake_queue(nic->netdev);
+ napi_enable(&nic->napi);
+ /* enable ints _after_ enabling poll, preventing a race between
+ * disable ints+schedule */
+ e100_enable_irq(nic);
+ return 0;
+
+err_no_irq:
+ del_timer_sync(&nic->watchdog);
+err_clean_cbs:
+ e100_clean_cbs(nic);
+err_rx_clean_list:
+ e100_rx_clean_list(nic);
+ return err;
+}
+
+static void e100_down(struct nic *nic)
+{
+ /* wait here for poll to complete */
+ napi_disable(&nic->napi);
+ netif_stop_queue(nic->netdev);
+ e100_hw_reset(nic);
+ free_irq(nic->pdev->irq, nic->netdev);
+ del_timer_sync(&nic->watchdog);
+ netif_carrier_off(nic->netdev);
+ e100_clean_cbs(nic);
+ e100_rx_clean_list(nic);
+}
+
+static void e100_tx_timeout(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ /* Reset outside of interrupt context, to avoid request_irq
+ * in interrupt context */
+ schedule_work(&nic->tx_timeout_task);
+}
+
+static void e100_tx_timeout_task(struct work_struct *work)
+{
+ struct nic *nic = container_of(work, struct nic, tx_timeout_task);
+ struct net_device *netdev = nic->netdev;
+
+ DPRINTK(TX_ERR, DEBUG, "scb.status=0x%02X\n",
+ ioread8(&nic->csr->scb.status));
+ e100_down(netdev_priv(netdev));
+ e100_up(netdev_priv(netdev));
+}
+
+static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode)
+{
+ int err;
+ struct sk_buff *skb;
+
+ /* Use driver resources to perform internal MAC or PHY
+ * loopback test. A single packet is prepared and transmitted
+ * in loopback mode, and the test passes if the received
+ * packet compares byte-for-byte to the transmitted packet. */
+
+ if((err = e100_rx_alloc_list(nic)))
+ return err;
+ if((err = e100_alloc_cbs(nic)))
+ goto err_clean_rx;
+
+ /* ICH PHY loopback is broken so do MAC loopback instead */
+ if(nic->flags & ich && loopback_mode == lb_phy)
+ loopback_mode = lb_mac;
+
+ nic->loopback = loopback_mode;
+ if((err = e100_hw_init(nic)))
+ goto err_loopback_none;
+
+ if(loopback_mode == lb_phy)
+ mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR,
+ BMCR_LOOPBACK);
+
+ e100_start_receiver(nic, NULL);
+
+ if(!(skb = netdev_alloc_skb(nic->netdev, ETH_DATA_LEN))) {
+ err = -ENOMEM;
+ goto err_loopback_none;
+ }
+ skb_put(skb, ETH_DATA_LEN);
+ memset(skb->data, 0xFF, ETH_DATA_LEN);
+ e100_xmit_frame(skb, nic->netdev);
+
+ msleep(10);
+
+ pci_dma_sync_single_for_cpu(nic->pdev, nic->rx_to_clean->dma_addr,
+ RFD_BUF_LEN, PCI_DMA_FROMDEVICE);
+
+ if(memcmp(nic->rx_to_clean->skb->data + sizeof(struct rfd),
+ skb->data, ETH_DATA_LEN))
+ err = -EAGAIN;
+
+err_loopback_none:
+ mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR, 0);
+ nic->loopback = lb_none;
+ e100_clean_cbs(nic);
+ e100_hw_reset(nic);
+err_clean_rx:
+ e100_rx_clean_list(nic);
+ return err;
+}
+
+#define MII_LED_CONTROL 0x1B
+static void e100_blink_led(unsigned long data)
+{
+ struct nic *nic = (struct nic *)data;
+ enum led_state {
+ led_on = 0x01,
+ led_off = 0x04,
+ led_on_559 = 0x05,
+ led_on_557 = 0x07,
+ };
+
+ nic->leds = (nic->leds & led_on) ? led_off :
+ (nic->mac < mac_82559_D101M) ? led_on_557 : led_on_559;
+ mdio_write(nic->netdev, nic->mii.phy_id, MII_LED_CONTROL, nic->leds);
+ mod_timer(&nic->blink_timer, jiffies + HZ / 4);
+}
+
+static int e100_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return mii_ethtool_gset(&nic->mii, cmd);
+}
+
+static int e100_set_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
+{
+ struct nic *nic = netdev_priv(netdev);
+ int err;
+
+ mdio_write(netdev, nic->mii.phy_id, MII_BMCR, BMCR_RESET);
+ err = mii_ethtool_sset(&nic->mii, cmd);
+ e100_exec_cb(nic, NULL, e100_configure);
+
+ return err;
+}
+
+static void e100_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *info)
+{
+ struct nic *nic = netdev_priv(netdev);
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->fw_version, "N/A");
+ strcpy(info->bus_info, pci_name(nic->pdev));
+}
+
+#define E100_PHY_REGS 0x1C
+static int e100_get_regs_len(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return 1 + E100_PHY_REGS + sizeof(nic->mem->dump_buf);
+}
+
+static void e100_get_regs(struct net_device *netdev,
+ struct ethtool_regs *regs, void *p)
+{
+ struct nic *nic = netdev_priv(netdev);
+ u32 *buff = p;
+ int i;
+
+ regs->version = (1 << 24) | nic->pdev->revision;
+ buff[0] = ioread8(&nic->csr->scb.cmd_hi) << 24 |
+ ioread8(&nic->csr->scb.cmd_lo) << 16 |
+ ioread16(&nic->csr->scb.status);
+ for(i = E100_PHY_REGS; i >= 0; i--)
+ buff[1 + E100_PHY_REGS - i] =
+ mdio_read(netdev, nic->mii.phy_id, i);
+ memset(nic->mem->dump_buf, 0, sizeof(nic->mem->dump_buf));
+ e100_exec_cb(nic, NULL, e100_dump);
+ msleep(10);
+ memcpy(&buff[2 + E100_PHY_REGS], nic->mem->dump_buf,
+ sizeof(nic->mem->dump_buf));
+}
+
+static void e100_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+ struct nic *nic = netdev_priv(netdev);
+ wol->supported = (nic->mac >= mac_82558_D101_A4) ? WAKE_MAGIC : 0;
+ wol->wolopts = (nic->flags & wol_magic) ? WAKE_MAGIC : 0;
+}
+
+static int e100_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ if ((wol->wolopts && wol->wolopts != WAKE_MAGIC) ||
+ !device_can_wakeup(&nic->pdev->dev))
+ return -EOPNOTSUPP;
+
+ if(wol->wolopts)
+ nic->flags |= wol_magic;
+ else
+ nic->flags &= ~wol_magic;
+
+ device_set_wakeup_enable(&nic->pdev->dev, wol->wolopts);
+
+ e100_exec_cb(nic, NULL, e100_configure);
+
+ return 0;
+}
+
+static u32 e100_get_msglevel(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return nic->msg_enable;
+}
+
+static void e100_set_msglevel(struct net_device *netdev, u32 value)
+{
+ struct nic *nic = netdev_priv(netdev);
+ nic->msg_enable = value;
+}
+
+static int e100_nway_reset(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return mii_nway_restart(&nic->mii);
+}
+
+static u32 e100_get_link(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return mii_link_ok(&nic->mii);
+}
+
+static int e100_get_eeprom_len(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return nic->eeprom_wc << 1;
+}
+
+#define E100_EEPROM_MAGIC 0x1234
+static int e100_get_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ eeprom->magic = E100_EEPROM_MAGIC;
+ memcpy(bytes, &((u8 *)nic->eeprom)[eeprom->offset], eeprom->len);
+
+ return 0;
+}
+
+static int e100_set_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ if(eeprom->magic != E100_EEPROM_MAGIC)
+ return -EINVAL;
+
+ memcpy(&((u8 *)nic->eeprom)[eeprom->offset], bytes, eeprom->len);
+
+ return e100_eeprom_save(nic, eeprom->offset >> 1,
+ (eeprom->len >> 1) + 1);
+}
+
+static void e100_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct nic *nic = netdev_priv(netdev);
+ struct param_range *rfds = &nic->params.rfds;
+ struct param_range *cbs = &nic->params.cbs;
+
+ ring->rx_max_pending = rfds->max;
+ ring->tx_max_pending = cbs->max;
+ ring->rx_mini_max_pending = 0;
+ ring->rx_jumbo_max_pending = 0;
+ ring->rx_pending = rfds->count;
+ ring->tx_pending = cbs->count;
+ ring->rx_mini_pending = 0;
+ ring->rx_jumbo_pending = 0;
+}
+
+static int e100_set_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct nic *nic = netdev_priv(netdev);
+ struct param_range *rfds = &nic->params.rfds;
+ struct param_range *cbs = &nic->params.cbs;
+
+ if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+ return -EINVAL;
+
+ if(netif_running(netdev))
+ e100_down(nic);
+ rfds->count = max(ring->rx_pending, rfds->min);
+ rfds->count = min(rfds->count, rfds->max);
+ cbs->count = max(ring->tx_pending, cbs->min);
+ cbs->count = min(cbs->count, cbs->max);
+ DPRINTK(DRV, INFO, "Ring Param settings: rx: %d, tx %d\n",
+ rfds->count, cbs->count);
+ if(netif_running(netdev))
+ e100_up(nic);
+
+ return 0;
+}
+
+static const char e100_gstrings_test[][ETH_GSTRING_LEN] = {
+ "Link test (on/offline)",
+ "Eeprom test (on/offline)",
+ "Self test (offline)",
+ "Mac loopback (offline)",
+ "Phy loopback (offline)",
+};
+#define E100_TEST_LEN ARRAY_SIZE(e100_gstrings_test)
+
+static void e100_diag_test(struct net_device *netdev,
+ struct ethtool_test *test, u64 *data)
+{
+ struct ethtool_cmd cmd;
+ struct nic *nic = netdev_priv(netdev);
+ int i, err;
+
+ memset(data, 0, E100_TEST_LEN * sizeof(u64));
+ data[0] = !mii_link_ok(&nic->mii);
+ data[1] = e100_eeprom_load(nic);
+ if(test->flags & ETH_TEST_FL_OFFLINE) {
+
+ /* save speed, duplex & autoneg settings */
+ err = mii_ethtool_gset(&nic->mii, &cmd);
+
+ if(netif_running(netdev))
+ e100_down(nic);
+ data[2] = e100_self_test(nic);
+ data[3] = e100_loopback_test(nic, lb_mac);
+ data[4] = e100_loopback_test(nic, lb_phy);
+
+ /* restore speed, duplex & autoneg settings */
+ err = mii_ethtool_sset(&nic->mii, &cmd);
+
+ if(netif_running(netdev))
+ e100_up(nic);
+ }
+ for(i = 0; i < E100_TEST_LEN; i++)
+ test->flags |= data[i] ? ETH_TEST_FL_FAILED : 0;
+
+ msleep_interruptible(4 * 1000);
+}
+
+static int e100_phys_id(struct net_device *netdev, u32 data)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ if(!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ))
+ data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ);
+ mod_timer(&nic->blink_timer, jiffies);
+ msleep_interruptible(data * 1000);
+ del_timer_sync(&nic->blink_timer);
+ mdio_write(netdev, nic->mii.phy_id, MII_LED_CONTROL, 0);
+
+ return 0;
+}
+
+static const char e100_gstrings_stats[][ETH_GSTRING_LEN] = {
+ "rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors",
+ "tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions",
+ "rx_length_errors", "rx_over_errors", "rx_crc_errors",
+ "rx_frame_errors", "rx_fifo_errors", "rx_missed_errors",
+ "tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors",
+ "tx_heartbeat_errors", "tx_window_errors",
+ /* device-specific stats */
+ "tx_deferred", "tx_single_collisions", "tx_multi_collisions",
+ "tx_flow_control_pause", "rx_flow_control_pause",
+ "rx_flow_control_unsupported", "tx_tco_packets", "rx_tco_packets",
+};
+#define E100_NET_STATS_LEN 21
+#define E100_STATS_LEN ARRAY_SIZE(e100_gstrings_stats)
+
+static int e100_get_sset_count(struct net_device *netdev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_TEST:
+ return E100_TEST_LEN;
+ case ETH_SS_STATS:
+ return E100_STATS_LEN;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void e100_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct nic *nic = netdev_priv(netdev);
+ int i;
+
+ for(i = 0; i < E100_NET_STATS_LEN; i++)
+ data[i] = ((unsigned long *)&netdev->stats)[i];
+
+ data[i++] = nic->tx_deferred;
+ data[i++] = nic->tx_single_collisions;
+ data[i++] = nic->tx_multiple_collisions;
+ data[i++] = nic->tx_fc_pause;
+ data[i++] = nic->rx_fc_pause;
+ data[i++] = nic->rx_fc_unsupported;
+ data[i++] = nic->tx_tco_frames;
+ data[i++] = nic->rx_tco_frames;
+}
+
+static void e100_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
+{
+ switch(stringset) {
+ case ETH_SS_TEST:
+ memcpy(data, *e100_gstrings_test, sizeof(e100_gstrings_test));
+ break;
+ case ETH_SS_STATS:
+ memcpy(data, *e100_gstrings_stats, sizeof(e100_gstrings_stats));
+ break;
+ }
+}
+
+static const struct ethtool_ops e100_ethtool_ops = {
+ .get_settings = e100_get_settings,
+ .set_settings = e100_set_settings,
+ .get_drvinfo = e100_get_drvinfo,
+ .get_regs_len = e100_get_regs_len,
+ .get_regs = e100_get_regs,
+ .get_wol = e100_get_wol,
+ .set_wol = e100_set_wol,
+ .get_msglevel = e100_get_msglevel,
+ .set_msglevel = e100_set_msglevel,
+ .nway_reset = e100_nway_reset,
+ .get_link = e100_get_link,
+ .get_eeprom_len = e100_get_eeprom_len,
+ .get_eeprom = e100_get_eeprom,
+ .set_eeprom = e100_set_eeprom,
+ .get_ringparam = e100_get_ringparam,
+ .set_ringparam = e100_set_ringparam,
+ .self_test = e100_diag_test,
+ .get_strings = e100_get_strings,
+ .phys_id = e100_phys_id,
+ .get_ethtool_stats = e100_get_ethtool_stats,
+ .get_sset_count = e100_get_sset_count,
+};
+
+static int e100_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ return generic_mii_ioctl(&nic->mii, if_mii(ifr), cmd, NULL);
+}
+
+static int e100_alloc(struct nic *nic)
+{
+ nic->mem = pci_alloc_consistent(nic->pdev, sizeof(struct mem),
+ &nic->dma_addr);
+ return nic->mem ? 0 : -ENOMEM;
+}
+
+static void e100_free(struct nic *nic)
+{
+ if(nic->mem) {
+ pci_free_consistent(nic->pdev, sizeof(struct mem),
+ nic->mem, nic->dma_addr);
+ nic->mem = NULL;
+ }
+}
+
+static int e100_open(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ int err = 0;
+
+ netif_carrier_off(netdev);
+ if((err = e100_up(nic)))
+ DPRINTK(IFUP, ERR, "Cannot open interface, aborting.\n");
+ return err;
+}
+
+static int e100_close(struct net_device *netdev)
+{
+ e100_down(netdev_priv(netdev));
+ return 0;
+}
+
+static int __devinit e100_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *netdev;
+ struct nic *nic;
+ int err;
+ DECLARE_MAC_BUF(mac);
+
+ if(!(netdev = alloc_etherdev(sizeof(struct nic)))) {
+ if(((1 << debug) - 1) & NETIF_MSG_PROBE)
+ printk(KERN_ERR PFX "Etherdev alloc failed, abort.\n");
+ return -ENOMEM;
+ }
+
+ netdev->open = e100_open;
+ netdev->stop = e100_close;
+ netdev->hard_start_xmit = e100_xmit_frame;
+ netdev->set_multicast_list = e100_set_multicast_list;
+ netdev->set_mac_address = e100_set_mac_address;
+ netdev->change_mtu = e100_change_mtu;
+ netdev->do_ioctl = e100_do_ioctl;
+ SET_ETHTOOL_OPS(netdev, &e100_ethtool_ops);
+ netdev->tx_timeout = e100_tx_timeout;
+ netdev->watchdog_timeo = E100_WATCHDOG_PERIOD;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ netdev->poll_controller = e100_netpoll;
+#endif
+ strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
+
+ nic = netdev_priv(netdev);
+ netif_napi_add(netdev, &nic->napi, e100_poll, E100_NAPI_WEIGHT);
+ nic->netdev = netdev;
+ nic->pdev = pdev;
+ nic->msg_enable = (1 << debug) - 1;
+ pci_set_drvdata(pdev, netdev);
+
+ if((err = pci_enable_device(pdev))) {
+ DPRINTK(PROBE, ERR, "Cannot enable PCI device, aborting.\n");
+ goto err_out_free_dev;
+ }
+
+ if(!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
+ DPRINTK(PROBE, ERR, "Cannot find proper PCI device "
+ "base address, aborting.\n");
+ err = -ENODEV;
+ goto err_out_disable_pdev;
+ }
+
+ if((err = pci_request_regions(pdev, DRV_NAME))) {
+ DPRINTK(PROBE, ERR, "Cannot obtain PCI resources, aborting.\n");
+ goto err_out_disable_pdev;
+ }
+
+ if((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK))) {
+ DPRINTK(PROBE, ERR, "No usable DMA configuration, aborting.\n");
+ goto err_out_free_res;
+ }
+
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ if (use_io)
+ DPRINTK(PROBE, INFO, "using i/o access mode\n");
+
+ nic->csr = pci_iomap(pdev, (use_io ? 1 : 0), sizeof(struct csr));
+ if(!nic->csr) {
+ DPRINTK(PROBE, ERR, "Cannot map device registers, aborting.\n");
+ err = -ENOMEM;
+ goto err_out_free_res;
+ }
+
+ if(ent->driver_data)
+ nic->flags |= ich;
+ else
+ nic->flags &= ~ich;
+
+ e100_get_defaults(nic);
+
+ /* locks must be initialized before calling hw_reset */
+ spin_lock_init(&nic->cb_lock);
+ spin_lock_init(&nic->cmd_lock);
+ spin_lock_init(&nic->mdio_lock);
+
+ /* Reset the device before pci_set_master() in case device is in some
+ * funky state and has an interrupt pending - hint: we don't have the
+ * interrupt handler registered yet. */
+ e100_hw_reset(nic);
+
+ pci_set_master(pdev);
+
+ init_timer(&nic->watchdog);
+ nic->watchdog.function = e100_watchdog;
+ nic->watchdog.data = (unsigned long)nic;
+ init_timer(&nic->blink_timer);
+ nic->blink_timer.function = e100_blink_led;
+ nic->blink_timer.data = (unsigned long)nic;
+
+ INIT_WORK(&nic->tx_timeout_task, e100_tx_timeout_task);
+
+ if((err = e100_alloc(nic))) {
+ DPRINTK(PROBE, ERR, "Cannot alloc driver memory, aborting.\n");
+ goto err_out_iounmap;
+ }
+
+ if((err = e100_eeprom_load(nic)))
+ goto err_out_free;
+
+ e100_phy_init(nic);
+
+ memcpy(netdev->dev_addr, nic->eeprom, ETH_ALEN);
+ memcpy(netdev->perm_addr, nic->eeprom, ETH_ALEN);
+ if (!is_valid_ether_addr(netdev->perm_addr)) {
+ if (!eeprom_bad_csum_allow) {
+ DPRINTK(PROBE, ERR, "Invalid MAC address from "
+ "EEPROM, aborting.\n");
+ err = -EAGAIN;
+ goto err_out_free;
+ } else {
+ DPRINTK(PROBE, ERR, "Invalid MAC address from EEPROM, "
+ "you MUST configure one.\n");
+ }
+ }
+
+ /* Wol magic packet can be enabled from eeprom */
+ if((nic->mac >= mac_82558_D101_A4) &&
+ (nic->eeprom[eeprom_id] & eeprom_id_wol)) {
+ nic->flags |= wol_magic;
+ device_set_wakeup_enable(&pdev->dev, true);
+ }
+
+ /* ack any pending wake events, disable PME */
+ pci_pme_active(pdev, false);
+
+ strcpy(netdev->name, "eth%d");
+ if((err = register_netdev(netdev))) {
+ DPRINTK(PROBE, ERR, "Cannot register net device, aborting.\n");
+ goto err_out_free;
+ }
+
+ DPRINTK(PROBE, INFO, "addr 0x%llx, irq %d, MAC addr %s\n",
+ (unsigned long long)pci_resource_start(pdev, use_io ? 1 : 0),
+ pdev->irq, print_mac(mac, netdev->dev_addr));
+
+ return 0;
+
+err_out_free:
+ e100_free(nic);
+err_out_iounmap:
+ pci_iounmap(pdev, nic->csr);
+err_out_free_res:
+ pci_release_regions(pdev);
+err_out_disable_pdev:
+ pci_disable_device(pdev);
+err_out_free_dev:
+ pci_set_drvdata(pdev, NULL);
+ free_netdev(netdev);
+ return err;
+}
+
+static void __devexit e100_remove(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+
+ if(netdev) {
+ struct nic *nic = netdev_priv(netdev);
+ unregister_netdev(netdev);
+ e100_free(nic);
+ pci_iounmap(pdev, nic->csr);
+ free_netdev(netdev);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+ }
+}
+
+static int e100_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct nic *nic = netdev_priv(netdev);
+
+ if (netif_running(netdev))
+ e100_down(nic);
+ netif_device_detach(netdev);
+
+ pci_save_state(pdev);
+
+ if ((nic->flags & wol_magic) | e100_asf(nic)) {
+ if (pci_enable_wake(pdev, PCI_D3cold, true))
+ pci_enable_wake(pdev, PCI_D3hot, true);
+ } else {
+ pci_enable_wake(pdev, PCI_D3hot, false);
+ }
+
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, PCI_D3hot);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int e100_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct nic *nic = netdev_priv(netdev);
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ /* ack any pending wake events, disable PME */
+ pci_enable_wake(pdev, 0, 0);
+
+ netif_device_attach(netdev);
+ if (netif_running(netdev))
+ e100_up(nic);
+
+ return 0;
+}
+#endif /* CONFIG_PM */
+
+static void e100_shutdown(struct pci_dev *pdev)
+{
+ e100_suspend(pdev, PMSG_SUSPEND);
+}
+
+/* ------------------ PCI Error Recovery infrastructure -------------- */
+/**
+ * e100_io_error_detected - called when PCI error is detected.
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ */
+static pci_ers_result_t e100_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct nic *nic = netdev_priv(netdev);
+
+ /* Similar to calling e100_down(), but avoids adapter I/O. */
+ netdev->stop(netdev);
+
+ /* Detach; put netif into a state similar to hotplug unplug. */
+ napi_enable(&nic->napi);
+ netif_device_detach(netdev);
+ pci_disable_device(pdev);
+
+ /* Request a slot reset. */
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * e100_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch.
+ */
+static pci_ers_result_t e100_io_slot_reset(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct nic *nic = netdev_priv(netdev);
+
+ if (pci_enable_device(pdev)) {
+ printk(KERN_ERR "e100: Cannot re-enable PCI device after reset.\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+ pci_set_master(pdev);
+
+ /* Only one device per card can do a reset */
+ if (0 != PCI_FUNC(pdev->devfn))
+ return PCI_ERS_RESULT_RECOVERED;
+ e100_hw_reset(nic);
+ e100_phy_init(nic);
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * e100_io_resume - resume normal operations
+ * @pdev: Pointer to PCI device
+ *
+ * Resume normal operations after an error recovery
+ * sequence has been completed.
+ */
+static void e100_io_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct nic *nic = netdev_priv(netdev);
+
+ /* ack any pending wake events, disable PME */
+ pci_enable_wake(pdev, 0, 0);
+
+ netif_device_attach(netdev);
+ if (netif_running(netdev)) {
+ e100_open(netdev);
+ mod_timer(&nic->watchdog, jiffies);
+ }
+}
+
+static struct pci_error_handlers e100_err_handler = {
+ .error_detected = e100_io_error_detected,
+ .slot_reset = e100_io_slot_reset,
+ .resume = e100_io_resume,
+};
+
+static struct pci_driver e100_driver = {
+ .name = DRV_NAME,
+ .id_table = e100_id_table,
+ .probe = e100_probe,
+ .remove = __devexit_p(e100_remove),
+#ifdef CONFIG_PM
+ /* Power Management hooks */
+ .suspend = e100_suspend,
+ .resume = e100_resume,
+#endif
+ .shutdown = e100_shutdown,
+ .err_handler = &e100_err_handler,
+};
+
+static int __init e100_init_module(void)
+{
+ if(((1 << debug) - 1) & NETIF_MSG_DRV) {
+ printk(KERN_INFO PFX "%s, %s\n", DRV_DESCRIPTION, DRV_VERSION);
+ printk(KERN_INFO PFX "%s\n", DRV_COPYRIGHT);
+ }
+ return pci_register_driver(&e100_driver);
+}
+
+static void __exit e100_cleanup_module(void)
+{
+ pci_unregister_driver(&e100_driver);
+}
+
+module_init(e100_init_module);
+module_exit(e100_cleanup_module);
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/generic.c Mon Jan 04 11:28:29 2010 +0100
@@ -0,0 +1,456 @@
+/******************************************************************************
+ *
+ * $Id$
+ *
+ * Copyright (C) 2006-2008 Florian Pose, Ingenieurgemeinschaft IgH
+ *
+ * This file is part of the IgH EtherCAT Master.
+ *
+ * The IgH EtherCAT Master is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ * The IgH EtherCAT Master is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+ * Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with the IgH EtherCAT Master; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * ---
+ *
+ * The license mentioned above concerns the source code only. Using the
+ * EtherCAT technology and brand is only permitted in compliance with the
+ * industrial property and similar rights of Beckhoff Automation GmbH.
+ *
+ *****************************************************************************/
+
+/** \file
+ * EtherCAT generic Ethernet device module.
+ */
+
+/*****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/version.h>
+#include <linux/if_arp.h> /* ARPHRD_ETHER */
+#include <linux/etherdevice.h>
+
+#include "../globals.h"
+#include "ecdev.h"
+
+#define PFX "ec_generic: "
+
+#define ETH_P_ETHERCAT 0x88A4
+
+#define EC_GEN_RX_BUF_SIZE 1600
+
+/*****************************************************************************/
+
+int __init ec_gen_init_module(void);
+void __exit ec_gen_cleanup_module(void);
+
+/*****************************************************************************/
+
+/** \cond */
+
+MODULE_AUTHOR("Florian Pose <fp@igh-essen.com>");
+MODULE_DESCRIPTION("EtherCAT master generic Ethernet device module");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(EC_MASTER_VERSION);
+
+/** \endcond */
+
+struct list_head generic_devices;
+
+typedef struct {
+ struct list_head list;
+ struct net_device *netdev;
+ struct socket *socket;
+ ec_device_t *ecdev;
+ uint8_t *rx_buf;
+} ec_gen_device_t;
+
+typedef struct {
+ struct list_head list;
+ char name[IFNAMSIZ];
+ int ifindex;
+ uint8_t dev_addr[ETH_ALEN];
+} ec_gen_interface_desc_t;
+
+int ec_gen_device_open(ec_gen_device_t *);
+int ec_gen_device_stop(ec_gen_device_t *);
+int ec_gen_device_start_xmit(ec_gen_device_t *, struct sk_buff *);
+void ec_gen_device_poll(ec_gen_device_t *);
+
+/*****************************************************************************/
+
+static int ec_gen_netdev_open(struct net_device *dev)
+{
+ ec_gen_device_t *gendev = *((ec_gen_device_t **) netdev_priv(dev));
+ return ec_gen_device_open(gendev);
+}
+
+/*****************************************************************************/
+
+static int ec_gen_netdev_stop(struct net_device *dev)
+{
+ ec_gen_device_t *gendev = *((ec_gen_device_t **) netdev_priv(dev));
+ return ec_gen_device_stop(gendev);
+}
+
+/*****************************************************************************/
+
+static int ec_gen_netdev_start_xmit(
+ struct sk_buff *skb,
+ struct net_device *dev
+ )
+{
+ ec_gen_device_t *gendev = *((ec_gen_device_t **) netdev_priv(dev));
+ return ec_gen_device_start_xmit(gendev, skb);
+}
+
+/*****************************************************************************/
+
+void ec_gen_poll(struct net_device *dev)
+{
+ ec_gen_device_t *gendev = *((ec_gen_device_t **) netdev_priv(dev));
+ ec_gen_device_poll(gendev);
+}
+
+/*****************************************************************************/
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 29)
+static const struct net_device_ops ec_gen_netdev_ops = {
+ .ndo_open = ec_gen_netdev_open,
+ .ndo_stop = ec_gen_netdev_stop,
+ .ndo_start_xmit = ec_gen_netdev_start_xmit,
+};
+#endif
+
+/*****************************************************************************/
+
+/** Init generic device.
+ */
+int ec_gen_device_init(
+ ec_gen_device_t *dev
+ )
+{
+ ec_gen_device_t **priv;
+ char null = 0x00;
+
+ dev->ecdev = NULL;
+ dev->socket = NULL;
+ dev->rx_buf = NULL;
+
+ dev->netdev = alloc_netdev(sizeof(ec_gen_device_t *), &null, ether_setup);
+ if (!dev->netdev) {
+ return -ENOMEM;
+ }
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 29)
+ dev->netdev->netdev_ops = &ec_gen_netdev_ops;
+#else
+ dev->netdev->open = ec_gen_netdev_open;
+ dev->netdev->stop = ec_gen_netdev_stop;
+ dev->netdev->hard_start_xmit = ec_gen_netdev_start_xmit;
+#endif
+
+ priv = netdev_priv(dev->netdev);
+ *priv = dev;
+
+ return 0;
+}
+
+/*****************************************************************************/
+
+/** Clear generic device.
+ */
+void ec_gen_device_clear(
+ ec_gen_device_t *dev
+ )
+{
+ if (dev->ecdev) {
+ ecdev_close(dev->ecdev);
+ ecdev_withdraw(dev->ecdev);
+ }
+ if (dev->socket) {
+ sock_release(dev->socket);
+ }
+ free_netdev(dev->netdev);
+
+ if (dev->rx_buf) {
+ kfree(dev->rx_buf);
+ }
+}
+
+/*****************************************************************************/
+
+/** Creates a network socket.
+ */
+int ec_gen_device_create_socket(
+ ec_gen_device_t *dev,
+ ec_gen_interface_desc_t *desc
+ )
+{
+ int ret;
+ struct sockaddr_ll sa;
+
+ dev->rx_buf = kmalloc(EC_GEN_RX_BUF_SIZE, GFP_KERNEL);
+ if (!dev->rx_buf) {
+ return -ENOMEM;
+ }
+
+ ret = sock_create_kern(PF_PACKET, SOCK_RAW, htons(ETH_P_ETHERCAT), &dev->socket);
+ if (ret) {
+ printk(KERN_ERR PFX "Failed to create socket.\n");
+ return ret;
+ }
+
+ printk(KERN_ERR PFX "Binding socket to interface %i (%s).\n",
+ desc->ifindex, desc->name);
+
+ memset(&sa, 0x00, sizeof(sa));
+ sa.sll_family = AF_PACKET;
+ sa.sll_protocol = htons(ETH_P_ETHERCAT);
+ sa.sll_ifindex = desc->ifindex;
+ ret = kernel_bind(dev->socket, (struct sockaddr *) &sa, sizeof(sa));
+ if (ret) {
+ printk(KERN_ERR PFX "Failed to bind() socket to interface.\n");
+ sock_release(dev->socket);
+ dev->socket = NULL;
+ return ret;
+ }
+
+ return 0;
+}
+
+/*****************************************************************************/
+
+/** Offer generic device to master.
+ */
+int ec_gen_device_offer(
+ ec_gen_device_t *dev,
+ ec_gen_interface_desc_t *desc
+ )
+{
+ int ret = 0;
+
+ memcpy(dev->netdev->dev_addr, desc->dev_addr, ETH_ALEN);
+
+ dev->ecdev = ecdev_offer(dev->netdev, ec_gen_poll, THIS_MODULE);
+ if (dev->ecdev) {
+ if (ec_gen_device_create_socket(dev, desc)) {
+ ecdev_withdraw(dev->ecdev);
+ dev->ecdev = NULL;
+ } else if (ecdev_open(dev->ecdev)) {
+ ecdev_withdraw(dev->ecdev);
+ dev->ecdev = NULL;
+ } else {
+ ecdev_set_link(dev->ecdev, 1); // FIXME
+ ret = 1;
+ }
+ }
+
+ return ret;
+}
+
+/*****************************************************************************/
+
+/** Open the device.
+ */
+int ec_gen_device_open(
+ ec_gen_device_t *dev
+ )
+{
+ return 0;
+}
+
+/*****************************************************************************/
+
+/** Stop the device.
+ */
+int ec_gen_device_stop(
+ ec_gen_device_t *dev
+ )
+{
+ return 0;
+}
+
+/*****************************************************************************/
+
+int ec_gen_device_start_xmit(
+ ec_gen_device_t *dev,
+ struct sk_buff *skb
+ )
+{
+ struct msghdr msg;
+ struct kvec iov;
+ size_t len = skb->len;
+ int ret;
+
+ iov.iov_base = skb->data;
+ iov.iov_len = len;
+ memset(&msg, 0, sizeof(msg));
+
+ ret = kernel_sendmsg(dev->socket, &msg, &iov, 1, len);
+
+ return ret == len ? NETDEV_TX_OK : NETDEV_TX_BUSY;
+}
+
+/*****************************************************************************/
+
+/** Polls the device.
+ */
+void ec_gen_device_poll(
+ ec_gen_device_t *dev
+ )
+{
+ struct msghdr msg;
+ struct kvec iov;
+ int ret, budget = 10; // FIXME
+
+ do {
+ iov.iov_base = dev->rx_buf;
+ iov.iov_len = EC_GEN_RX_BUF_SIZE;
+ memset(&msg, 0, sizeof(msg));
+
+ ret = kernel_recvmsg(dev->socket, &msg, &iov, 1, iov.iov_len,
+ MSG_DONTWAIT);
+ if (ret > 0) {
+ ecdev_receive(dev->ecdev, dev->rx_buf, ret);
+ } else if (ret < 0) {
+ break;
+ }
+ budget--;
+ } while (budget);
+}
+
+/*****************************************************************************/
+
+/** Offer device.
+ */
+int offer_device(
+ ec_gen_interface_desc_t *desc
+ )
+{
+ ec_gen_device_t *gendev;
+ int ret = 0;
+
+ gendev = kmalloc(sizeof(ec_gen_device_t), GFP_KERNEL);
+ if (!gendev) {
+ return -ENOMEM;
+ }
+
+ ret = ec_gen_device_init(gendev);
+ if (ret) {
+ kfree(gendev);
+ return ret;
+ }
+
+ if (ec_gen_device_offer(gendev, desc)) {
+ list_add_tail(&gendev->list, &generic_devices);
+ } else {
+ ec_gen_device_clear(gendev);
+ kfree(gendev);
+ }
+
+ return ret;
+}
+
+/*****************************************************************************/
+
+/** Clear devices.
+ */
+void clear_devices(void)
+{
+ ec_gen_device_t *gendev, *next;
+
+ list_for_each_entry_safe(gendev, next, &generic_devices, list) {
+ list_del(&gendev->list);
+ ec_gen_device_clear(gendev);
+ kfree(gendev);
+ }
+}
+
+/*****************************************************************************/
+
+/** Module initialization.
+ *
+ * Initializes \a master_count masters.
+ * \return 0 on success, else < 0
+ */
+int __init ec_gen_init_module(void)
+{
+ int ret = 0;
+ struct list_head descs;
+ struct net_device *netdev;
+ ec_gen_interface_desc_t *desc, *next;
+
+ printk(KERN_INFO PFX "EtherCAT master generic Ethernet device module %s\n",
+ EC_MASTER_VERSION);
+
+ INIT_LIST_HEAD(&generic_devices);
+ INIT_LIST_HEAD(&descs);
+
+ read_lock(&dev_base_lock);
+ for_each_netdev(&init_net, netdev) {
+ if (netdev->type != ARPHRD_ETHER)
+ continue;
+ desc = kmalloc(sizeof(ec_gen_interface_desc_t), GFP_KERNEL);
+ if (!desc) {
+ ret = -ENOMEM;
+ read_unlock(&dev_base_lock);
+ goto out_err;
+ }
+ strncpy(desc->name, netdev->name, IFNAMSIZ);
+ desc->ifindex = netdev->ifindex;
+ memcpy(desc->dev_addr, netdev->dev_addr, ETH_ALEN);
+ list_add_tail(&desc->list, &descs);
+ }
+ read_unlock(&dev_base_lock);
+
+ list_for_each_entry_safe(desc, next, &descs, list) {
+ ret = offer_device(desc);
+ if (ret) {
+ goto out_err;
+ }
+ kfree(desc);
+ }
+ return ret;
+
+out_err:
+ list_for_each_entry_safe(desc, next, &descs, list) {
+ list_del(&desc->list);
+ kfree(desc);
+ }
+ clear_devices();
+ return ret;
+}
+
+/*****************************************************************************/
+
+/** Module cleanup.
+ *
+ * Clears all master instances.
+ */
+void __exit ec_gen_cleanup_module(void)
+{
+ clear_devices();
+ printk(KERN_INFO PFX "Unloading.\n");
+}
+
+/*****************************************************************************/
+
+/** \cond */
+
+module_init(ec_gen_init_module);
+module_exit(ec_gen_cleanup_module);
+
+/** \endcond */
+
+/*****************************************************************************/
--- a/examples/Kbuild.in Mon Jan 04 11:27:37 2010 +0100
+++ b/examples/Kbuild.in Mon Jan 04 11:28:29 2010 +0100
@@ -25,8 +25,14 @@
# EtherCAT technology and brand is only permitted in compliance with the
# industrial property and similar rights of Beckhoff Automation GmbH.
#
+# vi: syntax=make
+#
#------------------------------------------------------------------------------
obj-m := mini/
+ifeq (@ENABLE_TTY@,1)
+ obj-m += tty/
+endif
+
#------------------------------------------------------------------------------
--- a/examples/Makefile.am Mon Jan 04 11:27:37 2010 +0100
+++ b/examples/Makefile.am Mon Jan 04 11:28:29 2010 +0100
@@ -38,6 +38,7 @@
dc_user \
mini \
rtai \
+ tty \
user
EXTRA_DIST = \
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/examples/tty/Kbuild.in Mon Jan 04 11:28:29 2010 +0100
@@ -0,0 +1,42 @@
+#------------------------------------------------------------------------------
+#
+# $Id$
+#
+# Copyright (C) 2006-2008 Florian Pose, Ingenieurgemeinschaft IgH
+#
+# This file is part of the IgH EtherCAT Master.
+#
+# The IgH EtherCAT Master is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License version 2, as
+# published by the Free Software Foundation.
+#
+# The IgH EtherCAT Master is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+# Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with the IgH EtherCAT Master; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+# ---
+#
+# The license mentioned above concerns the source code only. Using the
+# EtherCAT technology and brand is only permitted in compliance with the
+# industrial property and similar rights of Beckhoff Automation GmbH.
+#
+# ---
+#
+# vi: syntax=make
+#
+#------------------------------------------------------------------------------
+
+obj-m := ec_tty_example.o
+
+ec_tty_example-objs := tty.o
+
+KBUILD_EXTRA_SYMBOLS := \
+ @abs_top_builddir@/Module.symvers \
+ @abs_top_builddir@/master/Module.symvers
+
+#------------------------------------------------------------------------------
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/examples/tty/Makefile.am Mon Jan 04 11:28:29 2010 +0100
@@ -0,0 +1,51 @@
+#------------------------------------------------------------------------------
+#
+# Makefile.am
+#
+# IgH EtherCAT master module
+#
+# $Id$
+#
+# Copyright (C) 2006-2008 Florian Pose, Ingenieurgemeinschaft IgH
+#
+# This file is part of the IgH EtherCAT Master.
+#
+# The IgH EtherCAT Master is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License version 2, as
+# published by the Free Software Foundation.
+#
+# The IgH EtherCAT Master is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+# Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with the IgH EtherCAT Master; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+# ---
+#
+# The license mentioned above concerns the source code only. Using the
+# EtherCAT technology and brand is only permitted in compliance with the
+# industrial property and similar rights of Beckhoff Automation GmbH.
+#
+#------------------------------------------------------------------------------
+
+EXTRA_DIST = \
+ Kbuild.in \
+ tty.c
+
+BUILT_SOURCES = \
+ Kbuild
+
+modules:
+ $(MAKE) -C "$(LINUX_SOURCE_DIR)" M="@abs_srcdir@" modules
+
+modules_install:
+ mkdir -p $(DESTDIR)$(LINUX_MOD_PATH)
+ cp $(srcdir)/ec_tty_example.ko $(DESTDIR)$(LINUX_MOD_PATH)
+
+clean-local:
+ $(MAKE) -C "$(LINUX_SOURCE_DIR)" M="@abs_srcdir@" clean
+
+#------------------------------------------------------------------------------
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/examples/tty/tty.c Mon Jan 04 11:28:29 2010 +0100
@@ -0,0 +1,552 @@
+/******************************************************************************
+ *
+ * $Id$
+ *
+ * Copyright (C) 2006-2008 Florian Pose, Ingenieurgemeinschaft IgH
+ *
+ * This file is part of the IgH EtherCAT Master.
+ *
+ * The IgH EtherCAT Master is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ * The IgH EtherCAT Master is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+ * Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with the IgH EtherCAT Master; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * ---
+ *
+ * The license mentioned above concerns the source code only. Using the
+ * EtherCAT technology and brand is only permitted in compliance with the
+ * industrial property and similar rights of Beckhoff Automation GmbH.
+ *
+ *****************************************************************************/
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)
+#include <linux/semaphore.h>
+#else
+#include <asm/semaphore.h>
+#endif
+
+#include "../../include/ecrt.h" // EtherCAT realtime interface
+#include "../../include/ectty.h" // EtherCAT TTY interface
+
+/*****************************************************************************/
+
+// Module parameters
+#define FREQUENCY 100
+
+// Optional features
+
+#define PFX "ec_tty_example: "
+
+/*****************************************************************************/
+
+// EtherCAT
+static ec_master_t *master = NULL;
+static ec_master_state_t master_state = {};
+struct semaphore master_sem;
+
+static ec_domain_t *domain1 = NULL;
+static ec_domain_state_t domain1_state = {};
+
+// Timer
+static struct timer_list timer;
+
+/*****************************************************************************/
+
+// process data
+static uint8_t *domain1_pd; // process data memory
+
+#define BusCouplerPos 0, 0
+#define SerialPos 0, 1
+
+#define Beckhoff_EK1100 0x00000002, 0x044c2c52
+#define Beckhoff_EL6002 0x00000002, 0x17723052
+
+// offsets for PDO entries
+static unsigned int off_ctrl;
+static unsigned int off_tx;
+static unsigned int off_status;
+static unsigned int off_rx;
+
+const static ec_pdo_entry_reg_t domain1_regs[] = {
+ {SerialPos, Beckhoff_EL6002, 0x7001, 0x01, &off_ctrl},
+ {SerialPos, Beckhoff_EL6002, 0x7000, 0x11, &off_tx},
+ {SerialPos, Beckhoff_EL6002, 0x6001, 0x01, &off_status},
+ {SerialPos, Beckhoff_EL6002, 0x6000, 0x11, &off_rx},
+ {}
+};
+
+static unsigned int counter = 0;
+
+typedef enum {
+ SER_REQUEST_INIT,
+ SER_WAIT_FOR_INIT_RESPONSE,
+ SER_READY
+} serial_state_t;
+
+typedef struct {
+ size_t max_tx_data_size;
+ size_t max_rx_data_size;
+
+ uint8_t *tx_data;
+ uint8_t tx_data_size;
+
+ serial_state_t state;
+
+ uint8_t tx_request_toggle;
+ uint8_t tx_accepted_toggle;
+
+ uint8_t rx_request_toggle;
+ uint8_t rx_accepted_toggle;
+
+ uint16_t control;
+} serial_device_t;
+
+static serial_device_t *ser = NULL;
+static ec_tty_t *tty = NULL;
+
+/*****************************************************************************/
+
+/* Slave 1, "EL6002"
+ * Vendor ID: 0x00000002
+ * Product code: 0x17723052
+ * Revision number: 0x00100000
+ */
+
+ec_pdo_entry_info_t slave_1_pdo_entries[] = {
+ {0x7001, 0x01, 16}, /* Ctrl */
+ {0x7000, 0x11, 8}, /* Data Out 0 */
+ {0x7000, 0x12, 8}, /* Data Out 1 */
+ {0x7000, 0x13, 8}, /* Data Out 2 */
+ {0x7000, 0x14, 8}, /* Data Out 3 */
+ {0x7000, 0x15, 8}, /* Data Out 4 */
+ {0x7000, 0x16, 8}, /* Data Out 5 */
+ {0x7000, 0x17, 8}, /* Data Out 6 */
+ {0x7000, 0x18, 8}, /* Data Out 7 */
+ {0x7000, 0x19, 8}, /* Data Out 8 */
+ {0x7000, 0x1a, 8}, /* Data Out 9 */
+ {0x7000, 0x1b, 8}, /* Data Out 10 */
+ {0x7000, 0x1c, 8}, /* Data Out 11 */
+ {0x7000, 0x1d, 8}, /* Data Out 12 */
+ {0x7000, 0x1e, 8}, /* Data Out 13 */
+ {0x7000, 0x1f, 8}, /* Data Out 14 */
+ {0x7000, 0x20, 8}, /* Data Out 15 */
+ {0x7000, 0x21, 8}, /* Data Out 16 */
+ {0x7000, 0x22, 8}, /* Data Out 17 */
+ {0x7000, 0x23, 8}, /* Data Out 18 */
+ {0x7000, 0x24, 8}, /* Data Out 19 */
+ {0x7000, 0x25, 8}, /* Data Out 20 */
+ {0x7000, 0x26, 8}, /* Data Out 21 */
+ {0x7011, 0x01, 16}, /* Ctrl */
+ {0x7010, 0x11, 8}, /* Data Out 0 */
+ {0x7010, 0x12, 8}, /* Data Out 1 */
+ {0x7010, 0x13, 8}, /* Data Out 2 */
+ {0x7010, 0x14, 8}, /* Data Out 3 */
+ {0x7010, 0x15, 8}, /* Data Out 4 */
+ {0x7010, 0x16, 8}, /* Data Out 5 */
+ {0x7010, 0x17, 8}, /* Data Out 6 */
+ {0x7010, 0x18, 8}, /* Data Out 7 */
+ {0x7010, 0x19, 8}, /* Data Out 8 */
+ {0x7010, 0x1a, 8}, /* Data Out 9 */
+ {0x7010, 0x1b, 8}, /* Data Out 10 */
+ {0x7010, 0x1c, 8}, /* Data Out 11 */
+ {0x7010, 0x1d, 8}, /* Data Out 12 */
+ {0x7010, 0x1e, 8}, /* Data Out 13 */
+ {0x7010, 0x1f, 8}, /* Data Out 14 */
+ {0x7010, 0x20, 8}, /* Data Out 15 */
+ {0x7010, 0x21, 8}, /* Data Out 16 */
+ {0x7010, 0x22, 8}, /* Data Out 17 */
+ {0x7010, 0x23, 8}, /* Data Out 18 */
+ {0x7010, 0x24, 8}, /* Data Out 19 */
+ {0x7010, 0x25, 8}, /* Data Out 20 */
+ {0x7010, 0x26, 8}, /* Data Out 21 */
+ {0x6001, 0x01, 16}, /* Status */
+ {0x6000, 0x11, 8}, /* Data In 0 */
+ {0x6000, 0x12, 8}, /* Data In 1 */
+ {0x6000, 0x13, 8}, /* Data In 2 */
+ {0x6000, 0x14, 8}, /* Data In 3 */
+ {0x6000, 0x15, 8}, /* Data In 4 */
+ {0x6000, 0x16, 8}, /* Data In 5 */
+ {0x6000, 0x17, 8}, /* Data In 6 */
+ {0x6000, 0x18, 8}, /* Data In 7 */
+ {0x6000, 0x19, 8}, /* Data In 8 */
+ {0x6000, 0x1a, 8}, /* Data In 9 */
+ {0x6000, 0x1b, 8}, /* Data In 10 */
+ {0x6000, 0x1c, 8}, /* Data In 11 */
+ {0x6000, 0x1d, 8}, /* Data In 12 */
+ {0x6000, 0x1e, 8}, /* Data In 13 */
+ {0x6000, 0x1f, 8}, /* Data In 14 */
+ {0x6000, 0x20, 8}, /* Data In 15 */
+ {0x6000, 0x21, 8}, /* Data In 16 */
+ {0x6000, 0x22, 8}, /* Data In 17 */
+ {0x6000, 0x23, 8}, /* Data In 18 */
+ {0x6000, 0x24, 8}, /* Data In 19 */
+ {0x6000, 0x25, 8}, /* Data In 20 */
+ {0x6000, 0x26, 8}, /* Data In 21 */
+ {0x6011, 0x01, 16}, /* Status */
+ {0x6010, 0x11, 8}, /* Data In 0 */
+ {0x6010, 0x12, 8}, /* Data In 1 */
+ {0x6010, 0x13, 8}, /* Data In 2 */
+ {0x6010, 0x14, 8}, /* Data In 3 */
+ {0x6010, 0x15, 8}, /* Data In 4 */
+ {0x6010, 0x16, 8}, /* Data In 5 */
+ {0x6010, 0x17, 8}, /* Data In 6 */
+ {0x6010, 0x18, 8}, /* Data In 7 */
+ {0x6010, 0x19, 8}, /* Data In 8 */
+ {0x6010, 0x1a, 8}, /* Data In 9 */
+ {0x6010, 0x1b, 8}, /* Data In 10 */
+ {0x6010, 0x1c, 8}, /* Data In 11 */
+ {0x6010, 0x1d, 8}, /* Data In 12 */
+ {0x6010, 0x1e, 8}, /* Data In 13 */
+ {0x6010, 0x1f, 8}, /* Data In 14 */
+ {0x6010, 0x20, 8}, /* Data In 15 */
+ {0x6010, 0x21, 8}, /* Data In 16 */
+ {0x6010, 0x22, 8}, /* Data In 17 */
+ {0x6010, 0x23, 8}, /* Data In 18 */
+ {0x6010, 0x24, 8}, /* Data In 19 */
+ {0x6010, 0x25, 8}, /* Data In 20 */
+ {0x6010, 0x26, 8}, /* Data In 21 */
+};
+
+ec_pdo_info_t slave_1_pdos[] = {
+ {0x1604, 23, slave_1_pdo_entries + 0}, /* COM RxPDO-Map Outputs Ch.1 */
+ {0x1605, 23, slave_1_pdo_entries + 23}, /* COM RxPDO-Map Outputs Ch.2 */
+ {0x1a04, 23, slave_1_pdo_entries + 46}, /* COM TxPDO-Map Inputs Ch.1 */
+ {0x1a05, 23, slave_1_pdo_entries + 69}, /* COM TxPDO-Map Inputs Ch.2 */
+};
+
+ec_sync_info_t slave_1_syncs[] = {
+ {0, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
+ {1, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
+ {2, EC_DIR_OUTPUT, 2, slave_1_pdos + 0, EC_WD_DISABLE},
+ {3, EC_DIR_INPUT, 2, slave_1_pdos + 2, EC_WD_DISABLE},
+ {0xff}
+};
+
+/****************************************************************************/
+
+int serial_init(serial_device_t *ser, size_t max_tx, size_t max_rx)
+{
+ ser->max_tx_data_size = max_tx;
+ ser->max_rx_data_size = max_rx;
+ ser->tx_data = NULL;
+ ser->tx_data_size = 0;
+ ser->state = SER_REQUEST_INIT;
+ ser->tx_request_toggle = 0;
+ ser->rx_accepted_toggle = 0;
+ ser->control = 0x0000;
+
+ if (max_tx > 0) {
+ ser->tx_data = kmalloc(max_tx, GFP_KERNEL);
+ if (ser->tx_data == NULL) {
+ return -ENOMEM;
+ }
+ }
+
+ return 0;
+}
+
+/****************************************************************************/
+
+void serial_clear(serial_device_t *ser)
+{
+ if (ser->tx_data) {
+ kfree(ser->tx_data);
+ }
+}
+
+/****************************************************************************/
+
+void serial_run(serial_device_t *ser, uint16_t status, uint8_t *rx_data)
+{
+ uint8_t tx_accepted_toggle, rx_request_toggle;
+
+ switch (ser->state) {
+ case SER_READY:
+
+ /* Send data */
+
+ tx_accepted_toggle = status & 0x0001;
+ if (tx_accepted_toggle != ser->tx_accepted_toggle) { // ready
+ ser->tx_data_size =
+ ectty_tx_data(tty, ser->tx_data, ser->max_tx_data_size);
+ if (ser->tx_data_size) {
+ printk(KERN_INFO PFX "Sending %u bytes.\n", ser->tx_data_size);
+ ser->tx_request_toggle = !ser->tx_request_toggle;
+ ser->tx_accepted_toggle = tx_accepted_toggle;
+ }
+ }
+
+ /* Receive data */
+
+ rx_request_toggle = status & 0x0002;
+ if (rx_request_toggle != ser->rx_request_toggle) {
+ uint8_t rx_data_size = status >> 8;
+ ser->rx_request_toggle = rx_request_toggle;
+ printk(KERN_INFO PFX "Received %u bytes.\n", rx_data_size);
+ ectty_rx_data(tty, rx_data, rx_data_size);
+ ser->rx_accepted_toggle = !ser->rx_accepted_toggle;
+ }
+
+ ser->control =
+ ser->tx_request_toggle |
+ ser->rx_accepted_toggle << 1 |
+ ser->tx_data_size << 8;
+ break;
+
+ case SER_REQUEST_INIT:
+ if (status & (1 << 2)) {
+ ser->control = 0x0000;
+ ser->state = SER_WAIT_FOR_INIT_RESPONSE;
+ } else {
+ ser->control = 1 << 2; // CW.2, request initialization
+ }
+ break;
+
+ case SER_WAIT_FOR_INIT_RESPONSE:
+ if (!(status & (1 << 2))) {
+ printk(KERN_INFO PFX "Init successful.\n");
+ ser->tx_accepted_toggle = 1;
+ ser->control = 0x0000;
+ ser->state = SER_READY;
+ }
+ break;
+ }
+
+}
+
+/*****************************************************************************/
+
+void check_domain1_state(void)
+{
+ ec_domain_state_t ds;
+
+ down(&master_sem);
+ ecrt_domain_state(domain1, &ds);
+ up(&master_sem);
+
+ if (ds.working_counter != domain1_state.working_counter)
+ printk(KERN_INFO PFX "Domain1: WC %u.\n", ds.working_counter);
+ if (ds.wc_state != domain1_state.wc_state)
+ printk(KERN_INFO PFX "Domain1: State %u.\n", ds.wc_state);
+
+ domain1_state = ds;
+}
+
+/*****************************************************************************/
+
+void check_master_state(void)
+{
+ ec_master_state_t ms;
+
+ down(&master_sem);
+ ecrt_master_state(master, &ms);
+ up(&master_sem);
+
+ if (ms.slaves_responding != master_state.slaves_responding)
+ printk(KERN_INFO PFX "%u slave(s).\n", ms.slaves_responding);
+ if (ms.al_states != master_state.al_states)
+ printk(KERN_INFO PFX "AL states: 0x%02X.\n", ms.al_states);
+ if (ms.link_up != master_state.link_up)
+ printk(KERN_INFO PFX "Link is %s.\n", ms.link_up ? "up" : "down");
+
+ master_state = ms;
+}
+
+/*****************************************************************************/
+
+void cyclic_task(unsigned long data)
+{
+ // receive process data
+ down(&master_sem);
+ ecrt_master_receive(master);
+ ecrt_domain_process(domain1);
+ up(&master_sem);
+
+ // check process data state (optional)
+ check_domain1_state();
+
+ if (counter) {
+ counter--;
+ } else { // do this at 1 Hz
+ counter = FREQUENCY;
+
+ // check for master state (optional)
+ check_master_state();
+ }
+
+ serial_run(ser, EC_READ_U16(domain1_pd + off_status), domain1_pd + off_rx);
+ EC_WRITE_U16(domain1_pd + off_ctrl, ser->control);
+ memcpy(domain1_pd + off_tx, ser->tx_data, 22);
+
+ // send process data
+ down(&master_sem);
+ ecrt_domain_queue(domain1);
+ ecrt_master_send(master);
+ up(&master_sem);
+
+ // restart timer
+ timer.expires += HZ / FREQUENCY;
+ add_timer(&timer);
+}
+
+/*****************************************************************************/
+
+void send_callback(void *cb_data)
+{
+ ec_master_t *m = (ec_master_t *) cb_data;
+ down(&master_sem);
+ ecrt_master_send_ext(m);
+ up(&master_sem);
+}
+
+/*****************************************************************************/
+
+void receive_callback(void *cb_data)
+{
+ ec_master_t *m = (ec_master_t *) cb_data;
+ down(&master_sem);
+ ecrt_master_receive(m);
+ up(&master_sem);
+}
+
+/*****************************************************************************/
+
+int __init init_mini_module(void)
+{
+ int ret = -1;
+ ec_slave_config_t *sc;
+
+ printk(KERN_INFO PFX "Starting...\n");
+
+ ser = kmalloc(sizeof(*ser), GFP_KERNEL);
+ if (!ser) {
+ printk(KERN_ERR PFX "Failed to allocate serial device object.\n");
+ ret = -ENOMEM;
+ goto out_return;
+ }
+
+ ret = serial_init(ser, 22, 22);
+ if (ret) {
+ printk(KERN_ERR PFX "Failed to init serial device object.\n");
+ goto out_free_serial;
+ }
+
+ tty = ectty_create();
+ if (IS_ERR(tty)) {
+ printk(KERN_ERR PFX "Failed to create tty.\n");
+ ret = PTR_ERR(tty);
+ goto out_serial;
+ }
+
+ master = ecrt_request_master(0);
+ if (!master) {
+ ret = -EBUSY;
+ printk(KERN_ERR PFX "Requesting master 0 failed.\n");
+ goto out_tty;
+ }
+
+ sema_init(&master_sem, 1);
+ ecrt_master_callbacks(master, send_callback, receive_callback, master);
+
+ printk(KERN_INFO PFX "Registering domain...\n");
+ if (!(domain1 = ecrt_master_create_domain(master))) {
+ printk(KERN_ERR PFX "Domain creation failed!\n");
+ goto out_release_master;
+ }
+
+ // Create configuration for bus coupler
+ sc = ecrt_master_slave_config(master, BusCouplerPos, Beckhoff_EK1100);
+ if (!sc)
+ return -1;
+
+ if (!(sc = ecrt_master_slave_config(
+ master, SerialPos, Beckhoff_EL6002))) {
+ printk(KERN_ERR PFX "Failed to get slave configuration.\n");
+ return -1;
+ }
+
+ printk("Configuring PDOs...\n");
+ if (ecrt_slave_config_pdos(sc, EC_END, slave_1_syncs)) {
+ printk(KERN_ERR PFX "Failed to configure PDOs.\n");
+ return -1;
+ }
+
+ if (ecrt_domain_reg_pdo_entry_list(domain1, domain1_regs)) {
+ printk(KERN_ERR PFX "PDO entry registration failed!\n");
+ return -1;
+ }
+
+ printk(KERN_INFO PFX "Activating master...\n");
+ if (ecrt_master_activate(master)) {
+ printk(KERN_ERR PFX "Failed to activate master!\n");
+ goto out_release_master;
+ }
+
+ // Get internal process data for domain
+ domain1_pd = ecrt_domain_data(domain1);
+
+ printk(KERN_INFO PFX "Starting cyclic sample thread.\n");
+ init_timer(&timer);
+ timer.function = cyclic_task;
+ timer.expires = jiffies + 10;
+ add_timer(&timer);
+
+ printk(KERN_INFO PFX "Started.\n");
+ return 0;
+
+out_release_master:
+ printk(KERN_ERR PFX "Releasing master...\n");
+ ecrt_release_master(master);
+out_tty:
+ ectty_free(tty);
+out_serial:
+ serial_clear(ser);
+out_free_serial:
+ kfree(ser);
+out_return:
+ printk(KERN_ERR PFX "Failed to load. Aborting.\n");
+ return ret;
+}
+
+/*****************************************************************************/
+
+void __exit cleanup_mini_module(void)
+{
+ printk(KERN_INFO PFX "Stopping...\n");
+
+ del_timer_sync(&timer);
+
+ printk(KERN_INFO PFX "Releasing master...\n");
+ ecrt_release_master(master);
+
+ ectty_free(tty);
+ serial_clear(ser);
+ kfree(ser);
+
+ printk(KERN_INFO PFX "Unloading.\n");
+}
+
+/*****************************************************************************/
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Florian Pose <fp@igh-essen.com>");
+MODULE_DESCRIPTION("EtherCAT minimal test environment");
+
+module_init(init_mini_module);
+module_exit(cleanup_mini_module);
+
+/*****************************************************************************/
--- a/include/Makefile.am Mon Jan 04 11:27:37 2010 +0100
+++ b/include/Makefile.am Mon Jan 04 11:28:29 2010 +0100
@@ -31,6 +31,8 @@
#
#------------------------------------------------------------------------------
-include_HEADERS = ecrt.h
+include_HEADERS = \
+ ecrt.h \
+ ectty.h
#------------------------------------------------------------------------------
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/include/ectty.h Mon Jan 04 11:28:29 2010 +0100
@@ -0,0 +1,97 @@
+/******************************************************************************
+ *
+ * $Id$
+ *
+ * Copyright (C) 2006-2008 Florian Pose, Ingenieurgemeinschaft IgH
+ *
+ * This file is part of the IgH EtherCAT master userspace library.
+ *
+ * The IgH EtherCAT master userspace library is free software; you can
+ * redistribute it and/or modify it under the terms of the GNU Lesser General
+ * Public License as published by the Free Software Foundation; version 2.1
+ * of the License.
+ *
+ * The IgH EtherCAT master userspace library is distributed in the hope that
+ * it will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with the IgH EtherCAT master userspace library. If not, see
+ * <http://www.gnu.org/licenses/>.
+ *
+ * ---
+ *
+ * The license mentioned above concerns the source code only. Using the
+ * EtherCAT technology and brand is only permitted in compliance with the
+ * industrial property and similar rights of Beckhoff Automation GmbH.
+ *
+ *****************************************************************************/
+
+/** \file
+ *
+ * EtherCAT virtual TTY interface.
+ *
+ * \defgroup TTYInterface EtherCAT Virtual TTY Interface
+ *
+ * @{
+ */
+
+/*****************************************************************************/
+
+#ifndef __ECTTY_H__
+#define __ECTTY_H__
+
+/******************************************************************************
+ * Data types
+ *****************************************************************************/
+
+struct ec_tty;
+typedef struct ec_tty ec_tty_t; /**< \see ec_tty */
+
+/******************************************************************************
+ * Global functions
+ *****************************************************************************/
+
+/** Create a virtual TTY interface.
+ *
+ * \return Pointer to the interface object, otherwise an ERR_PTR value.
+ */
+ec_tty_t *ectty_create(void);
+
+/******************************************************************************
+ * TTY interface methods
+ *****************************************************************************/
+
+/** Releases a virtual TTY interface.
+ */
+void ectty_free(
+ ec_tty_t *tty /**< TTY interface. */
+ );
+
+/** Reads data to send from the TTY interface.
+ *
+ * If there are data to send, they are copied into the \a buffer. At maximum,
+ * \a size bytes are copied. The actual number of bytes copied is returned.
+ *
+ * \return Number of bytes copied.
+ */
+unsigned int ectty_tx_data(
+ ec_tty_t *tty, /**< TTY interface. */
+ uint8_t *buffer, /**< Buffer for data to transmit. */
+ size_t size /**< Available space in \a buffer. */
+ );
+
+/** Pushes received data to the TTY interface.
+ */
+void ectty_rx_data(
+ ec_tty_t *tty, /**< TTY interface. */
+ const uint8_t *buffer, /**< Buffer with received data. */
+ size_t size /**< Number of bytes in \a buffer. */
+ );
+
+/*****************************************************************************/
+
+/** @} */
+
+#endif
--- a/master/cdev.c Mon Jan 04 11:27:37 2010 +0100
+++ b/master/cdev.c Mon Jan 04 11:28:29 2010 +0100
@@ -587,7 +587,7 @@
if (domain->data_size != data.data_size) {
up(&master->master_sem);
- EC_ERR("Data size mismatch %u/%u!\n",
+ EC_ERR("Data size mismatch %u/%zu!\n",
data.data_size, domain->data_size);
return -EFAULT;
}
@@ -982,7 +982,7 @@
|| data.offset + data.nwords > slave->sii_nwords) {
up(&master->master_sem);
EC_ERR("Invalid SII read offset/size %u/%u for slave "
- "SII size %u!\n", data.offset,
+ "SII size %zu!\n", data.offset,
data.nwords, slave->sii_nwords);
return -EINVAL;
}
@@ -3088,7 +3088,7 @@
data.error_code = request.req.error_code;
if (master->debug_level) {
- EC_DBG("Read %d bytes via FoE (result = 0x%x).\n",
+ EC_DBG("Read %zd bytes via FoE (result = 0x%x).\n",
request.req.data_size, request.req.result);
}
--- a/master/datagram.c Mon Jan 04 11:27:37 2010 +0100
+++ b/master/datagram.c Mon Jan 04 11:28:29 2010 +0100
@@ -116,6 +116,8 @@
*/
void ec_datagram_clear(ec_datagram_t *datagram /**< EtherCAT datagram. */)
{
+ ec_datagram_unqueue(datagram);
+
if (datagram->data_origin == EC_ORIG_INTERNAL && datagram->data) {
kfree(datagram->data);
datagram->data = NULL;
@@ -124,6 +126,17 @@
/*****************************************************************************/
+/** Unqueue datagram.
+ */
+void ec_datagram_unqueue(ec_datagram_t *datagram /**< EtherCAT datagram. */)
+{
+ if (!list_empty(&datagram->queue)) {
+ list_del_init(&datagram->queue);
+ }
+}
+
+/*****************************************************************************/
+
/** Allocates internal payload memory.
*
* If the allocated memory is already larger than requested, nothing ist done.
@@ -149,7 +162,7 @@
}
if (!(datagram->data = kmalloc(size, GFP_KERNEL))) {
- EC_ERR("Failed to allocate %u bytes of datagram memory!\n", size);
+ EC_ERR("Failed to allocate %zu bytes of datagram memory!\n", size);
return -ENOMEM;
}
@@ -516,8 +529,8 @@
datagram->stats_output_jiffies = jiffies;
if (unlikely(datagram->skip_count)) {
- EC_WARN("Datagram %x (%s) was SKIPPED %u time%s.\n",
- (unsigned int) datagram, datagram->name,
+ EC_WARN("Datagram %p (%s) was SKIPPED %u time%s.\n",
+ datagram, datagram->name,
datagram->skip_count,
datagram->skip_count == 1 ? "" : "s");
datagram->skip_count = 0;
--- a/master/datagram.h Mon Jan 04 11:27:37 2010 +0100
+++ b/master/datagram.h Mon Jan 04 11:28:29 2010 +0100
@@ -115,6 +115,7 @@
void ec_datagram_init(ec_datagram_t *);
void ec_datagram_clear(ec_datagram_t *);
+void ec_datagram_unqueue(ec_datagram_t *);
int ec_datagram_prealloc(ec_datagram_t *, size_t);
void ec_datagram_zero(ec_datagram_t *);
--- a/master/device.c Mon Jan 04 11:27:37 2010 +0100
+++ b/master/device.c Mon Jan 04 11:28:29 2010 +0100
@@ -309,16 +309,18 @@
skb->len = ETH_HLEN + size;
if (unlikely(device->master->debug_level > 1)) {
- EC_DBG("sending frame:\n");
- ec_print_data(skb->data + ETH_HLEN, size);
+ EC_DBG("Sending frame:\n");
+ ec_print_data(skb->data, ETH_HLEN + size);
}
// start sending
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 29)
- if (device->dev->netdev_ops->ndo_start_xmit(skb, device->dev) == NETDEV_TX_OK) {
+ if (device->dev->netdev_ops->ndo_start_xmit(skb, device->dev) ==
+ NETDEV_TX_OK)
#else
- if (device->dev->hard_start_xmit(skb, device->dev) == NETDEV_TX_OK) {
-#endif
+ if (device->dev->hard_start_xmit(skb, device->dev) == NETDEV_TX_OK)
+#endif
+ {
device->tx_count++;
#ifdef EC_DEBUG_IF
ec_debug_send(&device->dbg, skb->data, ETH_HLEN + size);
@@ -516,7 +518,7 @@
if (unlikely(device->master->debug_level > 1)) {
EC_DBG("Received frame:\n");
- ec_print_data(ec_data, ec_size);
+ ec_print_data(data, size);
}
#ifdef EC_DEBUG_IF
--- a/master/domain.c Mon Jan 04 11:27:37 2010 +0100
+++ b/master/domain.c Mon Jan 04 11:28:29 2010 +0100
@@ -80,8 +80,6 @@
// dequeue and free datagrams
list_for_each_entry_safe(datagram, next, &domain->datagrams, list) {
- if (!list_empty(&datagram->queue)) // datagram queued?
- list_del(&datagram->queue);
ec_datagram_clear(datagram);
kfree(datagram);
}
@@ -118,7 +116,7 @@
list_add_tail(&fmmu->list, &domain->fmmu_configs);
if (domain->master->debug_level)
- EC_DBG("Domain %u: Added %u bytes, total %u.\n", domain->index,
+ EC_DBG("Domain %u: Added %u bytes, total %zu.\n", domain->index,
fmmu->data_size, domain->data_size);
}
@@ -213,7 +211,7 @@
if (domain->data_size && domain->data_origin == EC_ORIG_INTERNAL) {
if (!(domain->data =
(uint8_t *) kmalloc(domain->data_size, GFP_KERNEL))) {
- EC_ERR("Failed to allocate %u bytes internal memory for"
+ EC_ERR("Failed to allocate %zu bytes internal memory for"
" domain %u!\n", domain->data_size, domain->index);
return -ENOMEM;
}
@@ -267,12 +265,12 @@
datagram_count++;
}
- EC_INFO("Domain%u: Logical address 0x%08x, %u byte, "
+ EC_INFO("Domain%u: Logical address 0x%08x, %zu byte, "
"expected working counter %u.\n", domain->index,
domain->logical_base_address, domain->data_size,
domain->expected_working_counter);
list_for_each_entry(datagram, &domain->datagrams, list) {
- EC_INFO(" Datagram %s: Logical offset 0x%08x, %u byte, type %s.\n",
+ EC_INFO(" Datagram %s: Logical offset 0x%08x, %zu byte, type %s.\n",
datagram->name, EC_READ_U32(datagram->address),
datagram->data_size, ec_datagram_type_string(datagram));
}
@@ -328,8 +326,8 @@
int ret;
if (domain->master->debug_level)
- EC_DBG("ecrt_domain_reg_pdo_entry_list(domain = 0x%x, regs = 0x%x)\n",
- (u32) domain, (u32) regs);
+ EC_DBG("ecrt_domain_reg_pdo_entry_list(domain = 0x%p, regs = 0x%p)\n",
+ domain, regs);
for (reg = regs; reg->index; reg++) {
sc = ecrt_master_slave_config_err(domain->master, reg->alias,
@@ -360,8 +358,8 @@
void ecrt_domain_external_memory(ec_domain_t *domain, uint8_t *mem)
{
if (domain->master->debug_level)
- EC_DBG("ecrt_domain_external_memory(domain = 0x%x, mem = 0x%x)\n",
- (u32) domain, (u32) mem);
+ EC_DBG("ecrt_domain_external_memory(domain = 0x%p, mem = 0x%p)\n",
+ domain, mem);
down(&domain->master->master_sem);
--- a/master/ethernet.c Mon Jan 04 11:27:37 2010 +0100
+++ b/master/ethernet.c Mon Jan 04 11:28:29 2010 +0100
@@ -80,9 +80,10 @@
int ec_eoedev_tx(struct sk_buff *, struct net_device *);
struct net_device_stats *ec_eoedev_stats(struct net_device *);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 31)
-static const struct net_device_ops ec_eoe_netdev_ops =
-{
+/*****************************************************************************/
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 29)
+static const struct net_device_ops ec_eoedev_ops = {
.ndo_open = ec_eoedev_open,
.ndo_stop = ec_eoedev_stop,
.ndo_start_xmit = ec_eoedev_tx,
@@ -150,8 +151,8 @@
}
// initialize net_device
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 31)
- eoe->dev->netdev_ops = &ec_eoe_netdev_ops;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 29)
+ eoe->dev->netdev_ops = &ec_eoedev_ops;
#else
eoe->dev->open = ec_eoedev_open;
eoe->dev->stop = ec_eoedev_stop;
@@ -201,7 +202,6 @@
void ec_eoe_clear(ec_eoe_t *eoe /**< EoE handler */)
{
unregister_netdev(eoe->dev); // possibly calls close callback
- free_netdev(eoe->dev);
// empty transmit queue
ec_eoe_flush(eoe);
@@ -211,7 +211,10 @@
kfree(eoe->tx_frame);
}
- if (eoe->rx_skb) dev_kfree_skb(eoe->rx_skb);
+ if (eoe->rx_skb)
+ dev_kfree_skb(eoe->rx_skb);
+
+ free_netdev(eoe->dev);
ec_datagram_clear(&eoe->datagram);
}
--- a/master/foe_request.c Mon Jan 04 11:27:37 2010 +0100
+++ b/master/foe_request.c Mon Jan 04 11:28:29 2010 +0100
@@ -114,7 +114,7 @@
ec_foe_request_clear_data(req);
if (!(req->buffer = (uint8_t *) kmalloc(size, GFP_KERNEL))) {
- EC_ERR("Failed to allocate %u bytes of FoE memory.\n", size);
+ EC_ERR("Failed to allocate %zu bytes of FoE memory.\n", size);
return -1;
}
--- a/master/fsm_coe.c Mon Jan 04 11:27:37 2010 +0100
+++ b/master/fsm_coe.c Mon Jan 04 11:28:29 2010 +0100
@@ -45,6 +45,10 @@
*/
#define EC_FSM_COE_DICT_TIMEOUT 3000
+#define EC_COE_DOWN_REQ_HEADER_SIZE 10
+#define EC_COE_DOWN_SEG_REQ_HEADER_SIZE 3
+#define EC_COE_DOWN_SEG_MIN_DATA_SIZE 7
+
/*****************************************************************************/
void ec_fsm_coe_dict_start(ec_fsm_coe_t *);
@@ -62,6 +66,8 @@
void ec_fsm_coe_down_request(ec_fsm_coe_t *);
void ec_fsm_coe_down_check(ec_fsm_coe_t *);
void ec_fsm_coe_down_response(ec_fsm_coe_t *);
+void ec_fsm_coe_down_seg_check(ec_fsm_coe_t *);
+void ec_fsm_coe_down_seg_response(ec_fsm_coe_t *);
void ec_fsm_coe_up_start(ec_fsm_coe_t *);
void ec_fsm_coe_up_request(ec_fsm_coe_t *);
@@ -446,7 +452,7 @@
}
if (rec_size < 3) {
- EC_ERR("Received corrupted SDO dictionary response (size %u).\n",
+ EC_ERR("Received corrupted SDO dictionary response (size %zu).\n",
rec_size);
fsm->state = ec_fsm_coe_error;
return;
@@ -480,7 +486,7 @@
}
if (rec_size < 8 || rec_size % 2) {
- EC_ERR("Invalid data size %u!\n", rec_size);
+ EC_ERR("Invalid data size %zu!\n", rec_size);
ec_print_data(data, rec_size);
fsm->state = ec_fsm_coe_error;
return;
@@ -690,7 +696,7 @@
}
if (rec_size < 3) {
- EC_ERR("Received corrupted SDO description response (size %u).\n",
+ EC_ERR("Received corrupted SDO description response (size %zu).\n",
rec_size);
fsm->state = ec_fsm_coe_error;
return;
@@ -707,7 +713,7 @@
}
if (rec_size < 8) {
- EC_ERR("Received corrupted SDO description response (size %u).\n",
+ EC_ERR("Received corrupted SDO description response (size %zu).\n",
rec_size);
fsm->state = ec_fsm_coe_error;
return;
@@ -929,7 +935,7 @@
if (rec_size < 3) {
EC_ERR("Received corrupted SDO entry description response "
- "(size %u).\n", rec_size);
+ "(size %zu).\n", rec_size);
fsm->state = ec_fsm_coe_error;
return;
}
@@ -946,7 +952,7 @@
if (rec_size < 9) {
EC_ERR("Received corrupted SDO entry description response "
- "(size %u).\n", rec_size);
+ "(size %zu).\n", rec_size);
fsm->state = ec_fsm_coe_error;
return;
}
@@ -969,7 +975,7 @@
}
if (rec_size < 16) {
- EC_ERR("Invalid data size %u!\n", rec_size);
+ EC_ERR("Invalid data size %zu!\n", rec_size);
ec_print_data(data, rec_size);
fsm->state = ec_fsm_coe_error;
return;
@@ -1061,17 +1067,17 @@
* CoE state machine
*****************************************************************************/
-/**
- CoE state: DOWN START.
-*/
-
-void ec_fsm_coe_down_start(ec_fsm_coe_t *fsm /**< finite state machine */)
+/** CoE state: DOWN START.
+ */
+void ec_fsm_coe_down_start(
+ ec_fsm_coe_t *fsm /**< finite state machine */
+ )
{
ec_datagram_t *datagram = fsm->datagram;
ec_slave_t *slave = fsm->slave;
ec_sdo_request_t *request = fsm->request;
uint8_t *data;
- uint8_t size;
+ uint8_t data_set_size;
if (fsm->slave->master->debug_level) {
char subidxstr[10];
@@ -1091,18 +1097,28 @@
return;
}
+ if (slave->configured_rx_mailbox_size <
+ EC_MBOX_HEADER_SIZE + EC_COE_DOWN_REQ_HEADER_SIZE) {
+ EC_ERR("Mailbox too small!\n");
+ fsm->state = ec_fsm_coe_error;
+ return;
+ }
+
if (request->data_size <= 4) { // use expedited transfer type
- data = ec_slave_mbox_prepare_send(slave, datagram, 0x03, 10);
+ data = ec_slave_mbox_prepare_send(slave, datagram, 0x03,
+ EC_COE_DOWN_REQ_HEADER_SIZE);
if (IS_ERR(data)) {
fsm->state = ec_fsm_coe_error;
return;
}
- size = 4 - request->data_size;
+ fsm->remaining = 0;
+
+ data_set_size = 4 - request->data_size;
EC_WRITE_U16(data, 0x2 << 12); // SDO request
EC_WRITE_U8 (data + 2, (0x3 // size specified, expedited
- | size << 2
+ | data_set_size << 2
| ((request->complete_access ? 1 : 0) << 4)
| 0x1 << 5)); // Download request
EC_WRITE_U16(data + 3, request->index);
@@ -1113,36 +1129,54 @@
if (slave->master->debug_level) {
EC_DBG("Expedited download request:\n");
- ec_print_data(data, 10);
+ ec_print_data(data, EC_COE_DOWN_REQ_HEADER_SIZE);
}
}
else { // request->data_size > 4, use normal transfer type
- if (slave->configured_rx_mailbox_size < 6 + 10 + request->data_size) {
- EC_ERR("SDO fragmenting not supported yet!\n"); // FIXME
- fsm->state = ec_fsm_coe_error;
- return;
+ size_t data_size,
+ max_data_size =
+ slave->configured_rx_mailbox_size - EC_MBOX_HEADER_SIZE,
+ required_data_size =
+ EC_COE_DOWN_REQ_HEADER_SIZE + request->data_size;
+
+ if (max_data_size < required_data_size) {
+ // segmenting needed
+ data_size = max_data_size;
+ } else {
+ data_size = required_data_size;
}
data = ec_slave_mbox_prepare_send(slave, datagram, 0x03,
- request->data_size + 10);
+ data_size);
if (IS_ERR(data)) {
fsm->state = ec_fsm_coe_error;
return;
}
+ fsm->offset = 0;
+ fsm->remaining = request->data_size;
+
EC_WRITE_U16(data, 0x2 << 12); // SDO request
- EC_WRITE_U8 (data + 2, (0x1 // size indicator, normal
- | ((request->complete_access ? 1 : 0) << 4)
- | 0x1 << 5)); // Download request
+ EC_WRITE_U8(data + 2,
+ 0x1 // size indicator, normal
+ | ((request->complete_access ? 1 : 0) << 4)
+ | 0x1 << 5); // Download request
EC_WRITE_U16(data + 3, request->index);
EC_WRITE_U8 (data + 5,
request->complete_access ? 0x00 : request->subindex);
EC_WRITE_U32(data + 6, request->data_size);
- memcpy(data + 10, request->data, request->data_size);
+
+ if (data_size > EC_COE_DOWN_REQ_HEADER_SIZE) {
+ size_t segment_size = data_size - EC_COE_DOWN_REQ_HEADER_SIZE;
+ memcpy(data + EC_COE_DOWN_REQ_HEADER_SIZE,
+ request->data, segment_size);
+ fsm->offset += segment_size;
+ fsm->remaining -= segment_size;
+ }
if (slave->master->debug_level) {
EC_DBG("Normal download request:\n");
- ec_print_data(data, 10 + request->data_size);
+ ec_print_data(data, data_size);
}
}
@@ -1255,6 +1289,69 @@
/*****************************************************************************/
+void ec_fsm_coe_down_prepare_segment_request(
+ ec_fsm_coe_t *fsm /**< finite state machine */
+ )
+{
+ ec_datagram_t *datagram = fsm->datagram;
+ ec_slave_t *slave = fsm->slave;
+ ec_sdo_request_t *request = fsm->request;
+ size_t max_segment_size =
+ slave->configured_rx_mailbox_size
+ - EC_MBOX_HEADER_SIZE
+ - EC_COE_DOWN_SEG_REQ_HEADER_SIZE;
+ size_t segment_size, data_size;
+ uint8_t last_segment, seg_data_size, *data;
+
+ if (fsm->remaining > max_segment_size) {
+ segment_size = max_segment_size;
+ last_segment = 0;
+ } else {
+ segment_size = fsm->remaining;
+ last_segment = 1;
+ }
+
+ if (segment_size > EC_COE_DOWN_SEG_MIN_DATA_SIZE) {
+ seg_data_size = 0x00;
+ data_size = EC_COE_DOWN_SEG_REQ_HEADER_SIZE + segment_size;
+ } else {
+ seg_data_size = EC_COE_DOWN_SEG_MIN_DATA_SIZE - segment_size;
+ data_size = EC_COE_DOWN_SEG_REQ_HEADER_SIZE
+ + EC_COE_DOWN_SEG_MIN_DATA_SIZE;
+ }
+
+ data = ec_slave_mbox_prepare_send(slave, datagram, 0x03,
+ data_size);
+ if (IS_ERR(data)) {
+ fsm->state = ec_fsm_coe_error;
+ return;
+ }
+
+ EC_WRITE_U16(data, 0x2 << 12); // SDO request
+ EC_WRITE_U8(data + 2, (last_segment ? 1 : 0)
+ | (seg_data_size << 1)
+ | (fsm->toggle << 4)
+ | (0x00 << 5)); // Download segment request
+ memcpy(data + EC_COE_DOWN_SEG_REQ_HEADER_SIZE,
+ request->data + fsm->offset, segment_size);
+ if (segment_size < EC_COE_DOWN_SEG_MIN_DATA_SIZE) {
+ memset(data + EC_COE_DOWN_SEG_REQ_HEADER_SIZE + segment_size, 0x00,
+ EC_COE_DOWN_SEG_MIN_DATA_SIZE - segment_size);
+ }
+
+ fsm->offset += segment_size;
+ fsm->remaining -= segment_size;
+
+ if (slave->master->debug_level) {
+ EC_DBG("Download segment request:\n");
+ ec_print_data(data, data_size);
+ }
+
+ fsm->state = ec_fsm_coe_down_seg_check;
+}
+
+/*****************************************************************************/
+
/**
CoE state: DOWN RESPONSE.
\todo Timeout behavior
@@ -1314,7 +1411,7 @@
if (rec_size < 6) {
fsm->state = ec_fsm_coe_error;
- EC_ERR("Received data are too small (%u bytes):\n", rec_size);
+ EC_ERR("Received data are too small (%zu bytes):\n", rec_size);
ec_print_data(data, rec_size);
return;
}
@@ -1328,7 +1425,7 @@
} else {
sprintf(subidxstr, ":%02X", request->subindex);
}
- EC_ERR("SDO download 0x%04X%s (%u bytes) aborted on slave %u.\n",
+ EC_ERR("SDO download 0x%04X%s (%zu bytes) aborted on slave %u.\n",
request->index, subidxstr, request->data_size,
slave->ring_position);
if (rec_size < 10) {
@@ -1357,7 +1454,182 @@
return;
}
- fsm->state = ec_fsm_coe_end; // success
+ if (fsm->remaining) { // more segments to download
+ fsm->toggle = 0;
+ ec_fsm_coe_down_prepare_segment_request(fsm);
+ } else {
+ fsm->state = ec_fsm_coe_end; // success
+ }
+}
+
+/*****************************************************************************/
+
+/**
+ CoE state: DOWN SEG CHECK.
+*/
+
+void ec_fsm_coe_down_seg_check(ec_fsm_coe_t *fsm /**< finite state machine */)
+{
+ ec_datagram_t *datagram = fsm->datagram;
+ ec_slave_t *slave = fsm->slave;
+
+ if (datagram->state == EC_DATAGRAM_TIMED_OUT && fsm->retries--)
+ return;
+
+ if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ fsm->state = ec_fsm_coe_error;
+ EC_ERR("Failed to receive CoE mailbox check datagram for slave %u"
+ " (datagram state %u).\n",
+ slave->ring_position, datagram->state);
+ return;
+ }
+
+ if (datagram->working_counter != 1) {
+ fsm->state = ec_fsm_coe_error;
+ EC_ERR("Reception of CoE mailbox segment check"
+ " datagram failed on slave %u: ", slave->ring_position);
+ ec_datagram_print_wc_error(datagram);
+ return;
+ }
+
+ if (!ec_slave_mbox_check(datagram)) {
+ unsigned long diff_ms =
+ (datagram->jiffies_received - fsm->jiffies_start) * 1000 / HZ;
+ if (diff_ms >= fsm->request->response_timeout) {
+ fsm->state = ec_fsm_coe_error;
+ EC_ERR("Timeout while waiting for SDO download segment response "
+ "on slave %u.\n", slave->ring_position);
+ return;
+ }
+
+ ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ fsm->retries = EC_FSM_RETRIES;
+ return;
+ }
+
+ // Fetch response
+ ec_slave_mbox_prepare_fetch(slave, datagram); // can not fail.
+ fsm->retries = EC_FSM_RETRIES;
+ fsm->state = ec_fsm_coe_down_seg_response;
+}
+
+/*****************************************************************************/
+
+/**
+ CoE state: DOWN SEG RESPONSE.
+ \todo Timeout behavior
+*/
+
+void ec_fsm_coe_down_seg_response(
+ ec_fsm_coe_t *fsm /**< finite state machine */
+ )
+{
+ ec_datagram_t *datagram = fsm->datagram;
+ ec_slave_t *slave = fsm->slave;
+ uint8_t *data, mbox_prot;
+ size_t rec_size;
+ ec_sdo_request_t *request = fsm->request;
+
+ if (datagram->state == EC_DATAGRAM_TIMED_OUT && fsm->retries--)
+ return; // FIXME: request again?
+
+ if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ fsm->state = ec_fsm_coe_error;
+ EC_ERR("Failed to receive CoE download response datagram from"
+ " slave %u (datagram state %u).\n",
+ slave->ring_position, datagram->state);
+ return;
+ }
+
+ if (datagram->working_counter != 1) {
+ fsm->state = ec_fsm_coe_error;
+ EC_ERR("Reception of CoE download response failed on slave %u: ",
+ slave->ring_position);
+ ec_datagram_print_wc_error(datagram);
+ return;
+ }
+
+ data = ec_slave_mbox_fetch(slave, datagram, &mbox_prot, &rec_size);
+ if (IS_ERR(data)) {
+ fsm->state = ec_fsm_coe_error;
+ return;
+ }
+
+ if (mbox_prot != 0x03) { // CoE
+ fsm->state = ec_fsm_coe_error;
+ EC_ERR("Received mailbox protocol 0x%02X as response.\n", mbox_prot);
+ return;
+ }
+
+ if (ec_fsm_coe_check_emergency(fsm, data, rec_size)) {
+ // check for CoE response again
+ ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ fsm->retries = EC_FSM_RETRIES;
+ fsm->state = ec_fsm_coe_down_check;
+ return;
+ }
+
+ if (slave->master->debug_level) {
+ EC_DBG("Download response:\n");
+ ec_print_data(data, rec_size);
+ }
+
+ if (rec_size < 6) {
+ fsm->state = ec_fsm_coe_error;
+ EC_ERR("Received data are too small (%zu bytes):\n", rec_size);
+ ec_print_data(data, rec_size);
+ return;
+ }
+
+ if (EC_READ_U16(data) >> 12 == 0x2 && // SDO request
+ EC_READ_U8 (data + 2) >> 5 == 0x4) { // abort SDO transfer request
+ char subidxstr[10];
+ fsm->state = ec_fsm_coe_error;
+ if (request->complete_access) {
+ subidxstr[0] = 0x00;
+ } else {
+ sprintf(subidxstr, ":%02X", request->subindex);
+ }
+ EC_ERR("SDO download 0x%04X%s (%zu bytes) aborted on slave %u.\n",
+ request->index, subidxstr, request->data_size,
+ slave->ring_position);
+ if (rec_size < 10) {
+ EC_ERR("Incomplete abort command:\n");
+ ec_print_data(data, rec_size);
+ } else {
+ fsm->request->abort_code = EC_READ_U32(data + 6);
+ ec_canopen_abort_msg(fsm->request->abort_code);
+ }
+ return;
+ }
+
+ if (EC_READ_U16(data) >> 12 != 0x3 ||
+ ((EC_READ_U8(data + 2) >> 5) != 0x01)) { // segment response
+ if (slave->master->debug_level) {
+ EC_DBG("Invalid SDO download response at slave %u! Retrying...\n",
+ slave->ring_position);
+ ec_print_data(data, rec_size);
+ }
+ // check for CoE response again
+ ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ fsm->retries = EC_FSM_RETRIES;
+ fsm->state = ec_fsm_coe_down_seg_check;
+ return;
+ }
+
+ if (((EC_READ_U8(data + 2) >> 4) & 0x01) != fsm->toggle) {
+ EC_ERR("Invalid toggle received during segmented download:\n");
+ ec_print_data(data, rec_size);
+ fsm->state = ec_fsm_coe_error;
+ return;
+ }
+
+ if (fsm->remaining) { // more segments to download
+ fsm->toggle = !fsm->toggle;
+ ec_fsm_coe_down_prepare_segment_request(fsm);
+ } else {
+ fsm->state = ec_fsm_coe_end; // success
+ }
}
/*****************************************************************************/
@@ -1526,6 +1798,7 @@
EC_WRITE_U16(data, 0x2 << 12); // SDO request
EC_WRITE_U8 (data + 2, (fsm->toggle << 4 // toggle
| 0x3 << 5)); // upload segment request
+ memset(data + 3, 0x00, 7);
if (fsm->slave->master->debug_level) {
EC_DBG("Upload segment request:\n");
@@ -1597,7 +1870,7 @@
if (rec_size < 6) {
fsm->state = ec_fsm_coe_error;
- EC_ERR("Received currupted SDO upload response (%u bytes)!\n", rec_size);
+ EC_ERR("Received currupted SDO upload response (%zu bytes)!\n", rec_size);
ec_print_data(data, rec_size);
return;
}
@@ -1657,7 +1930,7 @@
if (rec_size < 6 + fsm->complete_size) {
fsm->state = ec_fsm_coe_error;
EC_ERR("Received currupted SDO expedited upload"
- " response (only %u bytes)!\n", rec_size);
+ " response (only %zu bytes)!\n", rec_size);
ec_print_data(data, rec_size);
return;
}
@@ -1670,7 +1943,7 @@
if (rec_size < 10) {
fsm->state = ec_fsm_coe_error;
EC_ERR("Received currupted SDO normal upload"
- " response (only %u bytes)!\n", rec_size);
+ " response (only %zu bytes)!\n", rec_size);
ec_print_data(data, rec_size);
return;
}
@@ -1699,7 +1972,7 @@
if (data_size < fsm->complete_size) {
if (master->debug_level)
- EC_DBG("SDO data incomplete (%u / %u). Segmenting...\n",
+ EC_DBG("SDO data incomplete (%zu / %u). Segmenting...\n",
data_size, fsm->complete_size);
ec_fsm_coe_up_prepare_segment_request(fsm);
@@ -1927,7 +2200,7 @@
if (request->data_size != fsm->complete_size) {
EC_WARN("SDO upload 0x%04X:%02X on slave %u: Assembled data"
- " size (%u) does not match complete size (%u)!\n",
+ " size (%zu) does not match complete size (%u)!\n",
request->index, request->subindex, slave->ring_position,
request->data_size, fsm->complete_size);
}
--- a/master/fsm_coe.h Mon Jan 04 11:27:37 2010 +0100
+++ b/master/fsm_coe.h Mon Jan 04 11:28:29 2010 +0100
@@ -61,6 +61,8 @@
ec_sdo_request_t *request; /**< SDO request */
uint32_t complete_size; /**< Used when segmenting. */
uint8_t toggle; /**< toggle bit for segment commands */
+ uint32_t offset; /**< Data offset during segmented download. */
+ uint32_t remaining; /**< Remaining bytes during segmented download. */
};
/*****************************************************************************/
--- a/master/fsm_foe.c Mon Jan 04 11:27:37 2010 +0100
+++ b/master/fsm_foe.c Mon Jan 04 11:28:29 2010 +0100
@@ -849,7 +849,7 @@
printk ("ERROR: data doesn't fit in receive buffer\n");
printk (" rx_buffer_size = %d\n", fsm->rx_buffer_size);
printk (" rx_buffer_offset= %d\n", fsm->rx_buffer_offset);
- printk (" rec_size = %d\n", rec_size);
+ printk (" rec_size = %zd\n", rec_size);
printk (" rx_mailbox_size = %d\n",
slave->configured_rx_mailbox_size);
printk (" rx_last_packet = %d\n", fsm->rx_last_packet);
--- a/master/fsm_master.c Mon Jan 04 11:27:37 2010 +0100
+++ b/master/fsm_master.c Mon Jan 04 11:28:29 2010 +0100
@@ -367,13 +367,13 @@
// found pending request; process it!
if (master->debug_level)
EC_DBG("Processing register request for slave %u, "
- "offset 0x%04x, length %u...\n",
+ "offset 0x%04x, length %zu...\n",
request->slave->ring_position,
request->offset, request->length);
if (request->length > fsm->datagram->mem_size) {
- EC_ERR("Request length (%u) exceeds maximum "
- "datagram size (%u)!\n", request->length,
+ EC_ERR("Request length (%zu) exceeds maximum "
+ "datagram size (%zu)!\n", request->length,
fsm->datagram->mem_size);
request->state = EC_INT_REQUEST_FAILURE;
wake_up(&master->reg_queue);
@@ -869,7 +869,7 @@
// finished writing SII
if (master->debug_level)
- EC_DBG("Finished writing %u words of SII data to slave %u.\n",
+ EC_DBG("Finished writing %zu words of SII data to slave %u.\n",
request->nwords, slave->ring_position);
if (request->offset <= 4 && request->offset + request->nwords > 4) {
@@ -986,7 +986,7 @@
kfree(request->data);
request->data = kmalloc(request->length, GFP_KERNEL);
if (!request->data) {
- EC_ERR("Failed to allocate %u bytes of memory for"
+ EC_ERR("Failed to allocate %zu bytes of memory for"
" register data.\n", request->length);
request->state = EC_INT_REQUEST_FAILURE;
wake_up(&master->reg_queue);
--- a/master/fsm_pdo.c Mon Jan 04 11:27:37 2010 +0100
+++ b/master/fsm_pdo.c Mon Jan 04 11:28:29 2010 +0100
@@ -236,7 +236,7 @@
}
if (fsm->request.data_size != sizeof(uint8_t)) {
- EC_ERR("Invalid data size %u returned when uploading SDO 0x%04X:%02X "
+ EC_ERR("Invalid data size %zu returned when uploading SDO 0x%04X:%02X "
"from slave %u.\n", fsm->request.data_size,
fsm->request.index, fsm->request.subindex,
fsm->slave->ring_position);
@@ -298,7 +298,7 @@
}
if (fsm->request.data_size != sizeof(uint16_t)) {
- EC_ERR("Invalid data size %u returned when uploading SDO 0x%04X:%02X "
+ EC_ERR("Invalid data size %zu returned when uploading SDO 0x%04X:%02X "
"from slave %u.\n", fsm->request.data_size,
fsm->request.index, fsm->request.subindex,
fsm->slave->ring_position);
--- a/master/fsm_pdo_entry.c Mon Jan 04 11:27:37 2010 +0100
+++ b/master/fsm_pdo_entry.c Mon Jan 04 11:28:29 2010 +0100
@@ -193,7 +193,7 @@
}
if (fsm->request.data_size != sizeof(uint8_t)) {
- EC_ERR("Invalid data size %u at uploading SDO 0x%04X:%02X.\n",
+ EC_ERR("Invalid data size %zu at uploading SDO 0x%04X:%02X.\n",
fsm->request.data_size, fsm->request.index,
fsm->request.subindex);
fsm->state = ec_fsm_pdo_entry_state_error;
@@ -248,7 +248,7 @@
}
if (fsm->request.data_size != sizeof(uint32_t)) {
- EC_ERR("Invalid data size %u at uploading SDO 0x%04X:%02X.\n",
+ EC_ERR("Invalid data size %zu at uploading SDO 0x%04X:%02X.\n",
fsm->request.data_size, fsm->request.index,
fsm->request.subindex);
fsm->state = ec_fsm_pdo_entry_state_error;
--- a/master/fsm_slave_scan.c Mon Jan 04 11:27:37 2010 +0100
+++ b/master/fsm_slave_scan.c Mon Jan 04 11:28:29 2010 +0100
@@ -546,7 +546,7 @@
if (!(slave->sii_words =
(uint16_t *) kmalloc(slave->sii_nwords * 2, GFP_KERNEL))) {
- EC_ERR("Failed to allocate %u words of SII data for slave %u.\n",
+ EC_ERR("Failed to allocate %zu words of SII data for slave %u.\n",
slave->sii_nwords, slave->ring_position);
slave->sii_nwords = 0;
slave->error_flag = 1;
--- a/master/globals.h Mon Jan 04 11:27:37 2010 +0100
+++ b/master/globals.h Mon Jan 04 11:28:29 2010 +0100
@@ -254,30 +254,6 @@
#define EC_DBG(fmt, args...) \
printk(KERN_DEBUG "EtherCAT DEBUG: " fmt, ##args)
-/** Convenience macro for defining read-only SysFS attributes.
- *
- * This results in creating a static variable called attr_\a NAME. The SysFS
- * file will be world-readable.
- *
- * \param NAME name of the attribute to create.
- */
-#define EC_SYSFS_READ_ATTR(NAME) \
- static struct attribute attr_##NAME = { \
- .name = EC_STR(NAME), .owner = THIS_MODULE, .mode = S_IRUGO \
- }
-
-/** Convenience macro for defining read-write SysFS attributes.
- *
- * This results in creating a static variable called attr_\a NAME. The SysFS
- * file will be word-readable plus owner-writable.
- *
- * \param NAME name of the attribute to create.
- */
-#define EC_SYSFS_READ_WRITE_ATTR(NAME) \
- static struct attribute attr_##NAME = { \
- .name = EC_STR(NAME), .owner = THIS_MODULE, .mode = S_IRUGO | S_IWUSR \
- }
-
/*****************************************************************************/
extern char *ec_master_version_str;
--- a/master/mailbox.c Mon Jan 04 11:27:37 2010 +0100
+++ b/master/mailbox.c Mon Jan 04 11:28:29 2010 +0100
@@ -66,12 +66,11 @@
total_size = EC_MBOX_HEADER_SIZE + size;
if (unlikely(total_size > slave->configured_rx_mailbox_size)) {
- EC_ERR("Data size (%u) does not fit in mailbox (%u)!\n",
+ EC_ERR("Data size (%zu) does not fit in mailbox (%u)!\n",
total_size, slave->configured_rx_mailbox_size);
return ERR_PTR(-EOVERFLOW);
}
- ec_datagram_zero(datagram);
ret = ec_datagram_fpwr(datagram, slave->station_address,
slave->configured_rx_mailbox_offset,
slave->configured_rx_mailbox_size);
--- a/master/mailbox.h Mon Jan 04 11:27:37 2010 +0100
+++ b/master/mailbox.h Mon Jan 04 11:28:29 2010 +0100
@@ -41,6 +41,10 @@
/*****************************************************************************/
+#define EC_MBOX_HEADER_SIZE 6
+
+/*****************************************************************************/
+
uint8_t *ec_slave_mbox_prepare_send(const ec_slave_t *, ec_datagram_t *,
uint8_t, size_t);
int ec_slave_mbox_prepare_check(const ec_slave_t *, ec_datagram_t *);
--- a/master/master.c Mon Jan 04 11:27:37 2010 +0100
+++ b/master/master.c Mon Jan 04 11:28:29 2010 +0100
@@ -821,7 +821,7 @@
if (queued_datagram == datagram) {
datagram->skip_count++;
if (master->debug_level)
- EC_DBG("skipping datagram %x.\n", (unsigned int) datagram);
+ EC_DBG("skipping datagram %p.\n", datagram);
datagram->state = EC_DATAGRAM_QUEUED;
return;
}
@@ -934,7 +934,7 @@
EC_WRITE_U8(cur_data++, 0x00);
if (unlikely(master->debug_level > 1))
- EC_DBG("frame size: %u\n", cur_data - frame_data);
+ EC_DBG("frame size: %zu\n", cur_data - frame_data);
// send frame
ec_device_send(&master->main_device, cur_data - frame_data);
@@ -988,7 +988,7 @@
if (unlikely(size < EC_FRAME_HEADER_SIZE)) {
if (master->debug_level) {
- EC_DBG("Corrupted frame received (size %u < %u byte):\n",
+ EC_DBG("Corrupted frame received (size %zu < %u byte):\n",
size, EC_FRAME_HEADER_SIZE);
ec_print_data(frame_data, size);
}
@@ -1005,8 +1005,8 @@
if (unlikely(frame_size > size)) {
if (master->debug_level) {
- EC_DBG("Corrupted frame received (invalid frame size %u for "
- "received size %u):\n", frame_size, size);
+ EC_DBG("Corrupted frame received (invalid frame size %zu for "
+ "received size %zu):\n", frame_size, size);
ec_print_data(frame_data, size);
}
master->stats.corrupted++;
@@ -1026,7 +1026,7 @@
if (unlikely(cur_data - frame_data
+ data_size + EC_DATAGRAM_FOOTER_SIZE > size)) {
if (master->debug_level) {
- EC_DBG("Corrupted frame received (invalid data size %u):\n",
+ EC_DBG("Corrupted frame received (invalid data size %zu):\n",
data_size);
ec_print_data(frame_data, size);
}
@@ -1803,7 +1803,7 @@
unsigned int index;
if (master->debug_level)
- EC_DBG("ecrt_master_create_domain(master = 0x%x)\n", (u32) master);
+ EC_DBG("ecrt_master_create_domain(master = 0x%p)\n", master);
if (!(domain = (ec_domain_t *) kmalloc(sizeof(ec_domain_t), GFP_KERNEL))) {
EC_ERR("Error allocating domain memory!\n");
@@ -1849,7 +1849,7 @@
int ret;
if (master->debug_level)
- EC_DBG("ecrt_master_activate(master = 0x%x)\n", (u32) master);
+ EC_DBG("ecrt_master_activate(master = 0x%p)\n", master);
if (master->active) {
EC_WARN("%s: Master already active!\n", __func__);
@@ -1864,7 +1864,7 @@
ret = ec_domain_finish(domain, domain_offset);
if (ret < 0) {
up(&master->master_sem);
- EC_ERR("Failed to finish domain 0x%08X!\n", (u32) domain);
+ EC_ERR("Failed to finish domain 0x%p!\n", domain);
return ret;
}
domain_offset += domain->data_size;
@@ -1884,7 +1884,7 @@
ec_master_thread_stop(master);
if (master->debug_level)
- EC_DBG("FSM datagram is %x.\n", (unsigned int) &master->fsm_datagram);
+ EC_DBG("FSM datagram is %p.\n", &master->fsm_datagram);
master->injection_seq_fsm = 0;
master->injection_seq_rt = 0;
@@ -2042,8 +2042,8 @@
time_us = (unsigned int) ((master->main_device.jiffies_poll -
datagram->jiffies_sent) * 1000000 / HZ);
#endif
- EC_DBG("TIMED OUT datagram %08x, index %02X waited %u us.\n",
- (unsigned int) datagram, datagram->index, time_us);
+ EC_DBG("TIMED OUT datagram %p, index %02X waited %u us.\n",
+ datagram, datagram->index, time_us);
}
}
}
@@ -2079,9 +2079,9 @@
if (master->debug_level)
- EC_DBG("ecrt_master_slave_config(master = 0x%x, alias = %u, "
+ EC_DBG("ecrt_master_slave_config(master = 0x%p, alias = %u, "
"position = %u, vendor_id = 0x%08x, product_code = 0x%08x)\n",
- (u32) master, alias, position, vendor_id, product_code);
+ master, alias, position, vendor_id, product_code);
list_for_each_entry(sc, &master->configs, list) {
if (sc->alias == alias && sc->position == position) {
@@ -2142,9 +2142,9 @@
void (*send_cb)(void *), void (*receive_cb)(void *), void *cb_data)
{
if (master->debug_level)
- EC_DBG("ecrt_master_callbacks(master = 0x%x, send_cb = 0x%x, "
- " receive_cb = 0x%x, cb_data = 0x%x)\n", (u32) master,
- (u32) send_cb, (u32) receive_cb, (u32) cb_data);
+ EC_DBG("ecrt_master_callbacks(master = 0x%p, send_cb = 0x%p, "
+ " receive_cb = 0x%p, cb_data = 0x%p)\n", master,
+ send_cb, receive_cb, cb_data);
master->app_send_cb = send_cb;
master->app_receive_cb = receive_cb;
--- a/master/module.c Mon Jan 04 11:27:37 2010 +0100
+++ b/master/module.c Mon Jan 04 11:28:29 2010 +0100
@@ -471,7 +471,8 @@
ec_device_attach(&master->main_device, net_dev, poll, module);
up(&master->device_sem);
- sprintf(net_dev->name, "ec%u", master->index);
+ snprintf(net_dev->name, IFNAMSIZ, "ec%u", master->index);
+
return &master->main_device; // offer accepted
}
else {
--- a/master/sdo_request.c Mon Jan 04 11:27:37 2010 +0100
+++ b/master/sdo_request.c Mon Jan 04 11:28:29 2010 +0100
@@ -145,7 +145,7 @@
ec_sdo_request_clear_data(req);
if (!(req->data = (uint8_t *) kmalloc(size, GFP_KERNEL))) {
- EC_ERR("Failed to allocate %u bytes of SDO memory.\n", size);
+ EC_ERR("Failed to allocate %zu bytes of SDO memory.\n", size);
return -ENOMEM;
}
--- a/master/slave.c Mon Jan 04 11:27:37 2010 +0100
+++ b/master/slave.c Mon Jan 04 11:28:29 2010 +0100
@@ -345,7 +345,7 @@
uint8_t flags;
if (data_size != 32) {
- EC_ERR("Wrong size of general category (%u/32) in slave %u.\n",
+ EC_ERR("Wrong size of general category (%zu/32) in slave %u.\n",
data_size, slave->ring_position);
return -EINVAL;
}
@@ -400,7 +400,7 @@
// one sync manager struct is 4 words long
if (data_size % 8) {
- EC_ERR("Invalid SII sync manager category size %u in slave %u.\n",
+ EC_ERR("Invalid SII sync manager category size %zu in slave %u.\n",
data_size, slave->ring_position);
return -EINVAL;
}
@@ -415,7 +415,7 @@
}
memsize = sizeof(ec_sync_t) * total_count;
if (!(syncs = kmalloc(memsize, GFP_KERNEL))) {
- EC_ERR("Failed to allocate %u bytes for sync managers.\n",
+ EC_ERR("Failed to allocate %zu bytes for sync managers.\n",
memsize);
return -ENOMEM;
}
--- a/master/slave_config.c Mon Jan 04 11:27:37 2010 +0100
+++ b/master/slave_config.c Mon Jan 04 11:28:29 2010 +0100
@@ -418,9 +418,9 @@
ec_sync_config_t *sync_config;
if (sc->master->debug_level)
- EC_DBG("ecrt_slave_config_sync_manager(sc = 0x%x, sync_index = %u, "
+ EC_DBG("ecrt_slave_config_sync_manager(sc = 0x%p, sync_index = %u, "
"dir = %i, watchdog_mode = %i)\n",
- (u32) sc, sync_index, dir, watchdog_mode);
+ sc, sync_index, dir, watchdog_mode);
if (sync_index >= EC_MAX_SYNC_MANAGERS) {
EC_ERR("Invalid sync manager index %u!\n", sync_index);
@@ -444,8 +444,8 @@
uint16_t divider, uint16_t intervals)
{
if (sc->master->debug_level)
- EC_DBG("%s(sc = 0x%x, divider = %u, intervals = %u)\n",
- __func__, (u32) sc, divider, intervals);
+ EC_DBG("%s(sc = 0x%p, divider = %u, intervals = %u)\n",
+ __func__, sc, divider, intervals);
sc->watchdog_divider = divider;
sc->watchdog_intervals = intervals;
@@ -459,8 +459,8 @@
ec_pdo_t *pdo;
if (sc->master->debug_level)
- EC_DBG("ecrt_slave_config_pdo_assign_add(sc = 0x%x, sync_index = %u, "
- "pdo_index = 0x%04X)\n", (u32) sc, sync_index, pdo_index);
+ EC_DBG("ecrt_slave_config_pdo_assign_add(sc = 0x%p, sync_index = %u, "
+ "pdo_index = 0x%04X)\n", sc, sync_index, pdo_index);
if (sync_index >= EC_MAX_SYNC_MANAGERS) {
EC_ERR("Invalid sync manager index %u!\n", sync_index);
@@ -488,8 +488,8 @@
uint8_t sync_index)
{
if (sc->master->debug_level)
- EC_DBG("ecrt_slave_config_pdo_assign_clear(sc = 0x%x, "
- "sync_index = %u)\n", (u32) sc, sync_index);
+ EC_DBG("ecrt_slave_config_pdo_assign_clear(sc = 0x%p, "
+ "sync_index = %u)\n", sc, sync_index);
if (sync_index >= EC_MAX_SYNC_MANAGERS) {
EC_ERR("Invalid sync manager index %u!\n", sync_index);
@@ -513,10 +513,10 @@
int retval = 0;
if (sc->master->debug_level)
- EC_DBG("ecrt_slave_config_pdo_mapping_add(sc = 0x%x, "
+ EC_DBG("ecrt_slave_config_pdo_mapping_add(sc = 0x%p, "
"pdo_index = 0x%04X, entry_index = 0x%04X, "
"entry_subindex = 0x%02X, entry_bit_length = %u)\n",
- (u32) sc, pdo_index, entry_index, entry_subindex,
+ sc, pdo_index, entry_index, entry_subindex,
entry_bit_length);
for (sync_index = 0; sync_index < EC_MAX_SYNC_MANAGERS; sync_index++)
@@ -549,8 +549,8 @@
ec_pdo_t *pdo = NULL;
if (sc->master->debug_level)
- EC_DBG("ecrt_slave_config_pdo_mapping_clear(sc = 0x%x, "
- "pdo_index = 0x%04X)\n", (u32) sc, pdo_index);
+ EC_DBG("ecrt_slave_config_pdo_mapping_clear(sc = 0x%p, "
+ "pdo_index = 0x%04X)\n", sc, pdo_index);
for (sync_index = 0; sync_index < EC_MAX_SYNC_MANAGERS; sync_index++)
if ((pdo = ec_pdo_list_find_pdo(
@@ -579,8 +579,8 @@
const ec_pdo_entry_info_t *entry_info;
if (sc->master->debug_level)
- EC_DBG("ecrt_slave_config_pdos(sc = 0x%x, n_syncs = %u, "
- "syncs = 0x%x)\n", (u32) sc, n_syncs, (u32) syncs);
+ EC_DBG("ecrt_slave_config_pdos(sc = 0x%p, n_syncs = %u, "
+ "syncs = 0x%p)\n", sc, n_syncs, syncs);
if (!syncs)
return 0;
@@ -651,9 +651,9 @@
int sync_offset;
if (sc->master->debug_level)
- EC_DBG("ecrt_slave_config_reg_pdo_entry(sc = 0x%x, index = 0x%04X, "
- "subindex = 0x%02X, domain = 0x%x, bit_position = 0x%x)\n",
- (u32) sc, index, subindex, (u32) domain, (u32) bit_position);
+ EC_DBG("ecrt_slave_config_reg_pdo_entry(sc = 0x%p, index = 0x%04X, "
+ "subindex = 0x%02X, domain = 0x%p, bit_position = 0x%p)\n",
+ sc, index, subindex, domain, bit_position);
for (sync_index = 0; sync_index < EC_MAX_SYNC_MANAGERS; sync_index++) {
sync_config = &sc->sync_configs[sync_index];
@@ -713,9 +713,9 @@
int ret;
if (sc->master->debug_level)
- EC_DBG("ecrt_slave_config_sdo(sc = 0x%x, index = 0x%04X, "
- "subindex = 0x%02X, data = 0x%x, size = %u)\n", (u32) sc,
- index, subindex, (u32) data, size);
+ EC_DBG("ecrt_slave_config_sdo(sc = 0x%p, index = 0x%04X, "
+ "subindex = 0x%02X, data = 0x%p, size = %zu)\n", sc,
+ index, subindex, data, size);
if (slave && !(slave->sii.mailbox_protocols & EC_MBOX_COE)) {
EC_ERR("Slave %u does not support CoE!\n", slave->ring_position);
@@ -752,8 +752,8 @@
uint8_t data[1];
if (sc->master->debug_level)
- EC_DBG("ecrt_slave_config_sdo8(sc = 0x%x, index = 0x%04X, "
- "subindex = 0x%02X, value = %u)\n", (u32) sc,
+ EC_DBG("ecrt_slave_config_sdo8(sc = 0x%p, index = 0x%04X, "
+ "subindex = 0x%02X, value = %u)\n", sc,
index, subindex, (u32) value);
EC_WRITE_U8(data, value);
@@ -768,8 +768,8 @@
uint8_t data[2];
if (sc->master->debug_level)
- EC_DBG("ecrt_slave_config_sdo16(sc = 0x%x, index = 0x%04X, "
- "subindex = 0x%02X, value = %u)\n", (u32) sc,
+ EC_DBG("ecrt_slave_config_sdo16(sc = 0x%p, index = 0x%04X, "
+ "subindex = 0x%02X, value = %u)\n", sc,
index, subindex, value);
EC_WRITE_U16(data, value);
@@ -784,8 +784,8 @@
uint8_t data[4];
if (sc->master->debug_level)
- EC_DBG("ecrt_slave_config_sdo32(sc = 0x%x, index = 0x%04X, "
- "subindex = 0x%02X, value = %u)\n", (u32) sc,
+ EC_DBG("ecrt_slave_config_sdo32(sc = 0x%p, index = 0x%04X, "
+ "subindex = 0x%02X, value = %u)\n", sc,
index, subindex, value);
EC_WRITE_U32(data, value);
@@ -802,9 +802,8 @@
int ret;
if (sc->master->debug_level)
- EC_DBG("ecrt_slave_config_complete_sdo(sc = 0x%x, index = 0x%04X, "
- "data = 0x%x, size = %u)\n", (u32) sc,
- index, (u32) data, size);
+ EC_DBG("ecrt_slave_config_complete_sdo(sc = 0x%p, index = 0x%04X, "
+ "data = 0x%p, size = %zu)\n", sc, index, data, size);
if (slave && !(slave->sii.mailbox_protocols & EC_MBOX_COE)) {
EC_ERR("Slave %u does not support CoE!\n", slave->ring_position);
@@ -846,8 +845,8 @@
int ret;
if (sc->master->debug_level)
- EC_DBG("ecrt_slave_config_create_sdo_request(sc = 0x%x, "
- "index = 0x%04X, subindex = 0x%02X, size = %u)\n", (u32) sc,
+ EC_DBG("ecrt_slave_config_create_sdo_request(sc = 0x%p, "
+ "index = 0x%04X, subindex = 0x%02X, size = %zu)\n", sc,
index, subindex, size);
if (!(req = (ec_sdo_request_t *)
@@ -899,8 +898,8 @@
int ret;
if (sc->master->debug_level)
- EC_DBG("ecrt_slave_config_create_voe_handler(sc = 0x%x, size = %u)\n",
- (u32) sc, size);
+ EC_DBG("ecrt_slave_config_create_voe_handler(sc = 0x%p, size = %zu)\n",
+ sc, size);
if (!(voe = (ec_voe_handler_t *)
kmalloc(sizeof(ec_voe_handler_t), GFP_KERNEL))) {
--- a/master/voe_handler.c Mon Jan 04 11:27:37 2010 +0100
+++ b/master/voe_handler.c Mon Jan 04 11:28:29 2010 +0100
@@ -212,7 +212,7 @@
uint8_t *data;
if (slave->master->debug_level) {
- EC_DBG("Writing %u bytes of VoE data to slave %u.\n",
+ EC_DBG("Writing %zu bytes of VoE data to slave %u.\n",
voe->data_size, slave->ring_position);
ec_print_data(ecrt_voe_handler_data(voe), voe->data_size);
}
@@ -234,6 +234,7 @@
EC_WRITE_U32(data, voe->vendor_id);
EC_WRITE_U16(data + 4, voe->vendor_type);
+ /* data already in datagram */
voe->retries = EC_FSM_RETRIES;
voe->jiffies_start = jiffies;
@@ -419,7 +420,7 @@
if (rec_size < EC_VOE_HEADER_SIZE) {
voe->state = ec_voe_handler_state_error;
voe->request_state = EC_INT_REQUEST_FAILURE;
- EC_ERR("Received VoE header is incomplete (%u bytes)!\n", rec_size);
+ EC_ERR("Received VoE header is incomplete (%zu bytes)!\n", rec_size);
return;
}
@@ -488,7 +489,7 @@
voe->state = ec_voe_handler_state_error;
voe->request_state = EC_INT_REQUEST_FAILURE;
if (master->debug_level)
- EC_DBG("Slave %u did not send VoE data.", slave->ring_position);
+ EC_DBG("Slave %u did not send VoE data.\n", slave->ring_position);
return;
}
@@ -519,7 +520,7 @@
if (rec_size < EC_VOE_HEADER_SIZE) {
voe->state = ec_voe_handler_state_error;
voe->request_state = EC_INT_REQUEST_FAILURE;
- EC_ERR("Received VoE header is incomplete (%u bytes)!\n", rec_size);
+ EC_ERR("Received VoE header is incomplete (%zu bytes)!\n", rec_size);
return;
}
--- a/script/init.d/ethercat.in Mon Jan 04 11:27:37 2010 +0100
+++ b/script/init.d/ethercat.in Mon Jan 04 11:28:29 2010 +0100
@@ -173,13 +173,17 @@
if ! ${MODINFO} ${ECMODULE} > /dev/null; then
continue # ec_* module not found
fi
- if lsmod | grep "^${MODULE} " > /dev/null; then
- if ! ${RMMOD} ${MODULE}; then
- exit_fail
+ if [ ${MODULE} != "generic" ]; then
+ if lsmod | grep "^${MODULE} " > /dev/null; then
+ if ! ${RMMOD} ${MODULE}; then
+ exit_fail
+ fi
fi
fi
if ! ${MODPROBE} ${MODPROBE_FLAGS} ${ECMODULE}; then
- ${MODPROBE} ${MODPROBE_FLAGS} ${MODULE} # try to restore module
+ if [ ${MODULE} != "generic" ]; then
+ ${MODPROBE} ${MODPROBE_FLAGS} ${MODULE} # try to restore
+ fi
exit_fail
fi
done
@@ -205,8 +209,10 @@
# reload previous modules
for MODULE in ${DEVICE_MODULES}; do
- if ! ${MODPROBE} ${MODPROBE_FLAGS} ${MODULE}; then
- echo Warning: Failed to restore ${MODULE}.
+ if [ ${MODULE} != "generic" ]; then
+ if ! ${MODPROBE} ${MODPROBE_FLAGS} ${MODULE}; then
+ echo Warning: Failed to restore ${MODULE}.
+ fi
fi
done
--- a/script/sysconfig/ethercat Mon Jan 04 11:27:37 2010 +0100
+++ b/script/sysconfig/ethercat Mon Jan 04 11:28:29 2010 +0100
@@ -26,17 +26,21 @@
#MASTER1_DEVICE=""
#
-# Ethernet driver modules to replace with EtherCAT-capable ones.
+# Ethernet driver modules to use for EtherCAT operation.
#
-# The init script will try to unload the Ethernet driver modules in the list
-# and replace them with the EtherCAT-capable ones, respectively. If a certain
-# (EtherCAT-capable) driver is not found, a warning will appear.
+# Specify a non-empty list of Ethernet drivers, that shall be used for EtherCAT
+# operation.
#
-# Possible values: 8139too, e100, e1000, r8169.
+# Except for the generic Ethernet driver module, the init script will try to
+# unload the usual Ethernet driver modules in the list and replace them with
+# the EtherCAT-capable ones. If a certain (EtherCAT-capable) driver is not
+# found, a warning will appear.
+#
+# Possible values: 8139too, e100, e1000, r8169, generic.
# Separate multiple drivers with spaces.
#
-# Note: The e100, e1000 and r8169 drivers are not built by default. Enable them
-# with the --enable-<driver> configure switches.
+# Note: The e100, e1000, r8169 and generic drivers are not built by default.
+# Enable them with the --enable-<driver> configure switches.
#
DEVICE_MODULES=""
--- a/tool/CommandXml.cpp Mon Jan 04 11:27:37 2010 +0100
+++ b/tool/CommandXml.cpp Mon Jan 04 11:28:29 2010 +0100
@@ -191,18 +191,18 @@
if (entry.bit_length == 1) {
cout << "BOOL";
} else if (!(entry.bit_length % 8)) {
- if (entry.bit_length <= 64)
+ if (entry.bit_length <= 64) {
cout << "UINT" << (unsigned int) entry.bit_length;
- else
+ } else {
cout << "STRING("
<< (unsigned int) (entry.bit_length / 8)
<< ")";
+ }
} else {
- cerr << "Invalid bit length "
- << (unsigned int) entry.bit_length << endl;
+ cout << "BIT" << (unsigned int) entry.bit_length;
}
- cout << "</DataType>" << endl;
+ cout << "</DataType>" << endl;
}
cout << in << " </Entry>" << endl;
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/tty/Kbuild.in Mon Jan 04 11:28:29 2010 +0100
@@ -0,0 +1,47 @@
+#------------------------------------------------------------------------------
+#
+# $Id$
+#
+# Copyright (C) 2006-2008 Florian Pose, Ingenieurgemeinschaft IgH
+#
+# This file is part of the IgH EtherCAT Master.
+#
+# The IgH EtherCAT Master is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License version 2, as
+# published by the Free Software Foundation.
+#
+# The IgH EtherCAT Master is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+# Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with the IgH EtherCAT Master; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+# ---
+#
+# The license mentioned above concerns the source code only. Using the EtherCAT
+# technology and brand is only permitted in compliance with the industrial
+# property and similar rights of Beckhoff Automation GmbH.
+#
+# ---
+#
+# vi: syntax=make
+#
+#------------------------------------------------------------------------------
+
+obj-m := ec_tty.o
+
+ec_tty-objs := \
+ module.o
+
+REV := $(shell if test -s $(src)/../revision; then \
+ cat $(src)/../revision; \
+ else \
+ hg id -i $(src)/.. 2>/dev/null || echo "unknown"; \
+ fi)
+
+CFLAGS_module.o := -DREV=$(REV)
+
+#------------------------------------------------------------------------------
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/tty/Makefile.am Mon Jan 04 11:28:29 2010 +0100
@@ -0,0 +1,60 @@
+#------------------------------------------------------------------------------
+#
+# $Id$
+#
+# Copyright (C) 2006-2008 Florian Pose, Ingenieurgemeinschaft IgH
+#
+# This file is part of the IgH EtherCAT Master.
+#
+# The IgH EtherCAT Master is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License version 2, as
+# published by the Free Software Foundation.
+#
+# The IgH EtherCAT Master is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+# Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with the IgH EtherCAT Master; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+# ---
+#
+# The license mentioned above concerns the source code only. Using the
+# EtherCAT technology and brand is only permitted in compliance with the
+# industrial property and similar rights of Beckhoff Automation GmbH.
+#
+#------------------------------------------------------------------------------
+
+# using HEADERS to enable tags target
+noinst_HEADERS = \
+ module.c
+
+EXTRA_DIST = \
+ Kbuild.in \
+ README
+
+BUILT_SOURCES = \
+ Kbuild
+
+modules:
+ $(MAKE) -C "$(LINUX_SOURCE_DIR)" M="@abs_srcdir@" modules
+
+modules_install:
+ mkdir -p $(DESTDIR)$(LINUX_MOD_PATH)
+ cp $(srcdir)/ec_tty.ko $(DESTDIR)$(LINUX_MOD_PATH)
+
+clean-local:
+ $(MAKE) -C "$(LINUX_SOURCE_DIR)" M="@abs_srcdir@" clean
+
+modulesdir=@prefix@/modules
+SYMVERS=`echo $(top_builddir)/Module*.symvers`
+
+install-data-local:
+ @test -n "$(SYMVERS)" && \
+ mkdir -p $(DESTDIR)$(modulesdir) && \
+ cp -vf $(SYMVERS) \
+ $(DESTDIR)$(modulesdir)/ec_tty.symvers
+
+#------------------------------------------------------------------------------
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/tty/README Mon Jan 04 11:28:29 2010 +0100
@@ -0,0 +1,25 @@
+$Id$
+
+vim700: spelllang=en spell
+
+Virtual TTY interface driver for EtherCAT slave supporting serial comm
+
+Quick installation guide:
+
+./configure --with-linux-dir=/your/linux/directory --enable-tty
+make all modules
+make modules_install install
+rcethercat start
+insmod tty/ec_tty.ko
+insmod examples/tty/ec_tty_example.ko
+
+The default settings for the serial line are 9600 8 N 1.
+
+The tty example operates a Beckhoff EL6002 at ring position 1. For a short
+test, connect port X1 with a serial port via null modem cable. If a minicom is
+started on that port and the below command is entered, the output should be
+visible in minicom:
+
+echo "Hello World" > /dev/ttyEC0
+
+Have a lot of fun!
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/tty/module.c Mon Jan 04 11:28:29 2010 +0100
@@ -0,0 +1,696 @@
+/******************************************************************************
+ *
+ * $Id$
+ *
+ * Copyright (C) 2006-2008 Florian Pose, Ingenieurgemeinschaft IgH
+ *
+ * This file is part of the IgH EtherCAT Master.
+ *
+ * The IgH EtherCAT Master is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ * The IgH EtherCAT Master is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+ * Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with the IgH EtherCAT Master; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * ---
+ *
+ * The license mentioned above concerns the source code only. Using the
+ * EtherCAT technology and brand is only permitted in compliance with the
+ * industrial property and similar rights of Beckhoff Automation GmbH.
+ *
+ *****************************************************************************/
+
+/** \file
+ * EtherCAT tty driver module.
+ */
+
+/*****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/termios.h>
+#include <linux/timer.h>
+
+#include "../master/globals.h"
+#include "../include/ectty.h"
+
+/*****************************************************************************/
+
+#define PFX "ec_tty: "
+
+#define EC_TTY_MAX_DEVICES 10
+#define EC_TTY_TX_BUFFER_SIZE 100
+#define EC_TTY_RX_BUFFER_SIZE 100
+
+#define EC_TTY_DEBUG 0
+
+/*****************************************************************************/
+
+char *ec_master_version_str = EC_MASTER_VERSION; /**< Version string. */
+unsigned int debug_level = 0;
+
+static struct tty_driver *tty_driver = NULL;
+ec_tty_t *ttys[EC_TTY_MAX_DEVICES];
+struct semaphore tty_sem;
+
+/*****************************************************************************/
+
+/** \cond */
+
+MODULE_AUTHOR("Florian Pose <fp@igh-essen.com>");
+MODULE_DESCRIPTION("EtherCAT TTY driver module");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(EC_MASTER_VERSION);
+
+module_param_named(debug_level, debug_level, uint, S_IRUGO);
+MODULE_PARM_DESC(debug_level, "Debug level");
+
+/** \endcond */
+
+static struct ktermios ec_tty_std_termios = {
+ .c_iflag = ICRNL | IXON,
+ .c_oflag = OPOST,
+ .c_cflag = B38400 | CS8 | CREAD | HUPCL,
+ .c_lflag = ISIG | ICANON | ECHO | ECHOE | ECHOK | ECHOCTL | ECHOKE | IEXTEN,
+ .c_cc = INIT_C_CC,
+};
+
+struct ec_tty {
+ int minor;
+ struct device *dev;
+
+ uint8_t tx_buffer[EC_TTY_TX_BUFFER_SIZE];
+ unsigned int tx_read_idx;
+ unsigned int tx_write_idx;
+ unsigned int wakeup;
+
+ uint8_t rx_buffer[EC_TTY_RX_BUFFER_SIZE];
+ unsigned int rx_read_idx;
+ unsigned int rx_write_idx;
+
+ struct timer_list timer;
+ struct tty_struct *tty;
+};
+
+static const struct tty_operations ec_tty_ops; // see below
+
+/*****************************************************************************/
+
+/** Module initialization.
+ *
+ * \return 0 on success, else < 0
+ */
+int __init ec_tty_init_module(void)
+{
+ int i, ret = 0;
+
+ printk(KERN_INFO PFX "TTY driver %s\n", EC_MASTER_VERSION);
+
+ init_MUTEX(&tty_sem);
+
+ for (i = 0; i < EC_TTY_MAX_DEVICES; i++) {
+ ttys[i] = NULL;
+ }
+
+ tty_driver = alloc_tty_driver(EC_TTY_MAX_DEVICES);
+ if (!tty_driver) {
+ printk(KERN_ERR PFX "Failed to allocate tty driver.\n");
+ ret = -ENOMEM;
+ goto out_return;
+ }
+
+ tty_driver->owner = THIS_MODULE;
+ tty_driver->driver_name = "EtherCAT TTY";
+ tty_driver->name = "ttyEC";
+ tty_driver->major = 0;
+ tty_driver->minor_start = 0;
+ tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
+ tty_driver->subtype = SERIAL_TYPE_NORMAL;
+ tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+ tty_driver->init_termios = ec_tty_std_termios;
+ tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ tty_set_operations(tty_driver, &ec_tty_ops);
+
+ ret = tty_register_driver(tty_driver);
+ if (ret) {
+ printk(KERN_ERR PFX "Failed to register tty driver.\n");
+ goto out_put;
+ }
+
+ return ret;
+
+out_put:
+ put_tty_driver(tty_driver);
+out_return:
+ return ret;
+}
+
+/*****************************************************************************/
+
+/** Module cleanup.
+ *
+ * Clears all master instances.
+ */
+void __exit ec_tty_cleanup_module(void)
+{
+ tty_unregister_driver(tty_driver);
+ put_tty_driver(tty_driver);
+ printk(KERN_INFO PFX "Module unloading.\n");
+}
+
+/*****************************************************************************/
+
+unsigned int ec_tty_tx_size(ec_tty_t *tty)
+{
+ unsigned int ret;
+
+ if (tty->tx_write_idx >= tty->tx_read_idx) {
+ ret = tty->tx_write_idx - tty->tx_read_idx;
+ } else {
+ ret = EC_TTY_TX_BUFFER_SIZE + tty->tx_write_idx - tty->tx_read_idx;
+ }
+
+ return ret;
+}
+
+/*****************************************************************************/
+
+unsigned int ec_tty_tx_space(ec_tty_t *tty)
+{
+ return EC_TTY_TX_BUFFER_SIZE - 1 - ec_tty_tx_size(tty);
+}
+
+/*****************************************************************************/
+
+unsigned int ec_tty_rx_size(ec_tty_t *tty)
+{
+ unsigned int ret;
+
+ if (tty->rx_write_idx >= tty->rx_read_idx) {
+ ret = tty->rx_write_idx - tty->rx_read_idx;
+ } else {
+ ret = EC_TTY_RX_BUFFER_SIZE + tty->rx_write_idx - tty->rx_read_idx;
+ }
+
+ return ret;
+}
+
+/*****************************************************************************/
+
+unsigned int ec_tty_rx_space(ec_tty_t *tty)
+{
+ return EC_TTY_RX_BUFFER_SIZE - 1 - ec_tty_rx_size(tty);
+}
+
+/*****************************************************************************/
+
+void ec_tty_wakeup(unsigned long data)
+{
+ ec_tty_t *tty = (ec_tty_t *) data;
+ size_t to_recv;
+
+ /* Wake up any process waiting to send data */
+ if (tty->wakeup) {
+ if (tty->tty) {
+#if EC_TTY_DEBUG >= 1
+ printk(KERN_INFO PFX "Waking up.\n");
+#endif
+ tty_wakeup(tty->tty);
+ }
+ tty->wakeup = 0;
+ }
+
+ /* Push received data into TTY core. */
+ to_recv = ec_tty_rx_size(tty);
+ if (to_recv && tty->tty) {
+ unsigned char *cbuf;
+ int space = tty_prepare_flip_string(tty->tty, &cbuf, to_recv);
+
+ if (space < to_recv) {
+ printk(KERN_WARNING PFX "Insufficient space to_recv=%d space=%d\n",
+ to_recv, space);
+ }
+
+ if (space < 0) {
+ to_recv = 0;
+ } else {
+ to_recv = space;
+ }
+
+ if (to_recv) {
+ unsigned int i;
+
+#if EC_TTY_DEBUG >= 1
+ printk(KERN_INFO PFX "Pushing %u bytes to TTY core.\n", to_recv);
+#endif
+
+ for (i = 0; i < to_recv; i++) {
+ cbuf[i] = tty->rx_buffer[tty->rx_read_idx];
+ tty->rx_read_idx = (tty->rx_read_idx + 1) % EC_TTY_RX_BUFFER_SIZE;
+ }
+ tty_flip_buffer_push(tty->tty);
+ }
+ }
+
+ tty->timer.expires += 1;
+ add_timer(&tty->timer);
+}
+
+/*****************************************************************************/
+
+int ec_tty_init(ec_tty_t *tty, int minor)
+{
+ tty->minor = minor;
+ tty->tx_read_idx = 0;
+ tty->tx_write_idx = 0;
+ tty->wakeup = 0;
+ tty->rx_read_idx = 0;
+ tty->rx_write_idx = 0;
+ init_timer(&tty->timer);
+ tty->tty = NULL;
+
+ tty->dev = tty_register_device(tty_driver, tty->minor, NULL);
+ if (IS_ERR(tty->dev)) {
+ printk(KERN_ERR PFX "Failed to register tty device.\n");
+ return PTR_ERR(tty->dev);
+ }
+
+ tty->timer.function = ec_tty_wakeup;
+ tty->timer.data = (unsigned long) tty;
+ tty->timer.expires = jiffies + 10;
+ add_timer(&tty->timer);
+ return 0;
+}
+
+/*****************************************************************************/
+
+void ec_tty_clear(ec_tty_t *tty)
+{
+ del_timer_sync(&tty->timer);
+ tty_unregister_device(tty_driver, tty->minor);
+}
+
+/******************************************************************************
+ * Device callbacks
+ *****************************************************************************/
+
+static int ec_tty_open(struct tty_struct *tty, struct file *file)
+{
+ ec_tty_t *t;
+ int line = tty->index;
+
+#if EC_TTY_DEBUG >= 1
+ printk(KERN_INFO PFX "Opening line %i.\n", line);
+#endif
+
+ if (line < 0 || line >= EC_TTY_MAX_DEVICES) {
+ return -ENXIO;
+ }
+
+ t = ttys[line];
+ if (!t) {
+ return -ENXIO;
+ }
+
+ if (t->tty) {
+ return -EBUSY;
+ }
+
+ t->tty = tty;
+ tty->driver_data = t;
+ return 0;
+}
+
+/*****************************************************************************/
+
+static void ec_tty_close(struct tty_struct *tty, struct file *file)
+{
+ ec_tty_t *t = (ec_tty_t *) tty->driver_data;
+
+#if EC_TTY_DEBUG >= 1
+ printk(KERN_INFO PFX "Closing line %i.\n", tty->index);
+#endif
+
+ if (t->tty == tty) {
+ t->tty = NULL;
+ }
+}
+
+/*****************************************************************************/
+
+static int ec_tty_write(
+ struct tty_struct *tty,
+ const unsigned char *buffer,
+ int count
+ )
+{
+ ec_tty_t *t = (ec_tty_t *) tty->driver_data;
+ unsigned int data_size, i;
+
+#if EC_TTY_DEBUG >= 1
+ printk(KERN_INFO PFX "%s(count=%i)\n", __func__, count);
+#endif
+
+ if (count <= 0) {
+ return 0;
+ }
+
+ data_size = min(ec_tty_tx_space(t), (unsigned int) count);
+ for (i = 0; i < data_size; i++) {
+ t->tx_buffer[t->tx_write_idx] = buffer[i];
+ t->tx_write_idx = (t->tx_write_idx + 1) % EC_TTY_TX_BUFFER_SIZE;
+ }
+
+#if EC_TTY_DEBUG >= 1
+ printk(KERN_INFO PFX "%s(): %u bytes written.\n", __func__, data_size);
+#endif
+ return data_size;
+}
+
+/*****************************************************************************/
+
+static void ec_tty_put_char(struct tty_struct *tty, unsigned char ch)
+{
+ ec_tty_t *t = (ec_tty_t *) tty->driver_data;
+
+#if EC_TTY_DEBUG >= 1
+ printk(KERN_INFO PFX "%s(): c=%02x.\n", __func__, (unsigned int) ch);
+#endif
+
+ if (ec_tty_tx_space(t)) {
+ t->tx_buffer[t->tx_write_idx] = ch;
+ t->tx_write_idx = (t->tx_write_idx + 1) % EC_TTY_TX_BUFFER_SIZE;
+ } else {
+ printk(KERN_WARNING PFX "%s(): Dropped a byte!\n", __func__);
+ }
+}
+
+/*****************************************************************************/
+
+static int ec_tty_write_room(struct tty_struct *tty)
+{
+ ec_tty_t *t = (ec_tty_t *) tty->driver_data;
+ int ret = ec_tty_tx_space(t);
+
+#if EC_TTY_DEBUG >= 2
+ printk(KERN_INFO PFX "%s() = %i.\n", __func__, ret);
+#endif
+
+ return ret;
+}
+
+/*****************************************************************************/
+
+static int ec_tty_chars_in_buffer(struct tty_struct *tty)
+{
+ ec_tty_t *t = (ec_tty_t *) tty->driver_data;
+ int ret;
+
+#if EC_TTY_DEBUG >= 2
+ printk(KERN_INFO PFX "%s().\n", __func__);
+#endif
+
+ ret = ec_tty_tx_size(t);
+
+#if EC_TTY_DEBUG >= 2
+ printk(KERN_INFO PFX "%s() = %i.\n", __func__, ret);
+#endif
+
+ return ret;
+}
+
+/*****************************************************************************/
+
+static void ec_tty_flush_buffer(struct tty_struct *tty)
+{
+#if EC_TTY_DEBUG >= 2
+ printk(KERN_INFO PFX "%s().\n", __func__);
+#endif
+}
+
+/*****************************************************************************/
+
+static int ec_tty_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+#if EC_TTY_DEBUG >= 2
+ printk(KERN_INFO PFX "%s().\n", __func__);
+#endif
+ return -ENOTTY;
+}
+
+/*****************************************************************************/
+
+static void ec_tty_throttle(struct tty_struct *tty)
+{
+#if EC_TTY_DEBUG >= 2
+ printk(KERN_INFO PFX "%s().\n", __func__);
+#endif
+}
+
+/*****************************************************************************/
+
+static void ec_tty_unthrottle(struct tty_struct *tty)
+{
+#if EC_TTY_DEBUG >= 2
+ printk(KERN_INFO PFX "%s().\n", __func__);
+#endif
+}
+
+/*****************************************************************************/
+
+static void ec_tty_set_termios(struct tty_struct *tty,
+ struct ktermios *old_termios)
+{
+#if EC_TTY_DEBUG >= 2
+ printk(KERN_INFO PFX "%s().\n", __func__);
+#endif
+}
+
+/*****************************************************************************/
+
+static void ec_tty_stop(struct tty_struct *tty)
+{
+#if EC_TTY_DEBUG >= 2
+ printk(KERN_INFO PFX "%s().\n", __func__);
+#endif
+}
+
+/*****************************************************************************/
+
+static void ec_tty_start(struct tty_struct *tty)
+{
+#if EC_TTY_DEBUG >= 2
+ printk(KERN_INFO PFX "%s().\n", __func__);
+#endif
+}
+
+/*****************************************************************************/
+
+static void ec_tty_hangup(struct tty_struct *tty)
+{
+#if EC_TTY_DEBUG >= 2
+ printk(KERN_INFO PFX "%s().\n", __func__);
+#endif
+}
+
+/*****************************************************************************/
+
+static void ec_tty_break(struct tty_struct *tty, int break_state)
+{
+#if EC_TTY_DEBUG >= 2
+ printk(KERN_INFO PFX "%s(break_state = %i).\n", __func__, break_state);
+#endif
+}
+
+/*****************************************************************************/
+
+static void ec_tty_send_xchar(struct tty_struct *tty, char ch)
+{
+#if EC_TTY_DEBUG >= 2
+ printk(KERN_INFO PFX "%s(ch=%02x).\n", __func__, (unsigned int) ch);
+#endif
+}
+
+/*****************************************************************************/
+
+static void ec_tty_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+#if EC_TTY_DEBUG >= 2
+ printk(KERN_INFO PFX "%s(timeout=%i).\n", __func__, timeout);
+#endif
+}
+
+/*****************************************************************************/
+
+static int ec_tty_tiocmget(struct tty_struct *tty, struct file *file)
+{
+#if EC_TTY_DEBUG >= 2
+ printk(KERN_INFO PFX "%s().\n", __func__);
+#endif
+ return -EBUSY;
+}
+
+/*****************************************************************************/
+
+static int ec_tty_tiocmset(struct tty_struct *tty, struct file *file,
+ unsigned int set, unsigned int clear)
+{
+#if EC_TTY_DEBUG >= 2
+ printk(KERN_INFO PFX "%s(set=%u, clear=%u).\n", __func__, set, clear);
+#endif
+ return -EBUSY;
+}
+
+/*****************************************************************************/
+
+static const struct tty_operations ec_tty_ops = {
+ .open = ec_tty_open,
+ .close = ec_tty_close,
+ .write = ec_tty_write,
+ .put_char = ec_tty_put_char,
+ .write_room = ec_tty_write_room,
+ .chars_in_buffer = ec_tty_chars_in_buffer,
+ .flush_buffer = ec_tty_flush_buffer,
+ .ioctl = ec_tty_ioctl,
+ .throttle = ec_tty_throttle,
+ .unthrottle = ec_tty_unthrottle,
+ .set_termios = ec_tty_set_termios,
+ .stop = ec_tty_stop,
+ .start = ec_tty_start,
+ .hangup = ec_tty_hangup,
+ .break_ctl = ec_tty_break,
+ .send_xchar = ec_tty_send_xchar,
+ .wait_until_sent = ec_tty_wait_until_sent,
+ .tiocmget = ec_tty_tiocmget,
+ .tiocmset = ec_tty_tiocmset,
+};
+
+/******************************************************************************
+ * Public functions and methods
+ *****************************************************************************/
+
+ec_tty_t *ectty_create(void)
+{
+ ec_tty_t *tty;
+ int minor, ret;
+
+ if (down_interruptible(&tty_sem)) {
+ return ERR_PTR(-EINTR);
+ }
+
+ for (minor = 0; minor < EC_TTY_MAX_DEVICES; minor++) {
+ if (!ttys[minor]) {
+ printk(KERN_INFO PFX "Creating TTY interface %i.\n", minor);
+
+ tty = kmalloc(sizeof(ec_tty_t), GFP_KERNEL);
+ if (!tty) {
+ up(&tty_sem);
+ printk(KERN_ERR PFX "Failed to allocate memory.\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ ret = ec_tty_init(tty, minor);
+ if (ret) {
+ up(&tty_sem);
+ kfree(tty);
+ return ERR_PTR(ret);
+ }
+
+ ttys[minor] = tty;
+ up(&tty_sem);
+ return tty;
+ }
+ }
+
+ up(&tty_sem);
+ printk(KERN_ERR PFX "No free interfaces avaliable.\n");
+ return ERR_PTR(-EBUSY);
+}
+
+/*****************************************************************************/
+
+void ectty_free(ec_tty_t *tty)
+{
+ printk(KERN_INFO PFX "Freeing TTY interface %i.\n", tty->minor);
+
+ ec_tty_clear(tty);
+ ttys[tty->minor] = NULL;
+ kfree(tty);
+}
+
+/*****************************************************************************/
+
+unsigned int ectty_tx_data(ec_tty_t *tty, uint8_t *buffer, size_t size)
+{
+ unsigned int data_size = min(ec_tty_tx_size(tty), size), i;
+
+ if (data_size) {
+#if EC_TTY_DEBUG >= 1
+ printk(KERN_INFO PFX "Fetching %u bytes to send.\n", data_size);
+#endif
+ }
+
+ for (i = 0; i < data_size; i++) {
+ buffer[i] = tty->tx_buffer[tty->tx_read_idx];
+ tty->tx_read_idx = (tty->tx_read_idx + 1) % EC_TTY_TX_BUFFER_SIZE;
+ }
+
+ if (data_size) {
+ tty->wakeup = 1;
+ }
+
+ return data_size;
+}
+
+/*****************************************************************************/
+
+void ectty_rx_data(ec_tty_t *tty, const uint8_t *buffer, size_t size)
+{
+ size_t to_recv;
+
+ if (size) {
+ unsigned int i;
+
+#if EC_TTY_DEBUG >= 1
+ printk(KERN_INFO PFX "Received %u bytes.\n", size);
+#endif
+
+ to_recv = min(ec_tty_rx_space(tty), size);
+
+ if (to_recv < size) {
+ printk(KERN_WARNING PFX "Dropping %u bytes.\n", size - to_recv);
+ }
+
+ for (i = 0; i < size; i++) {
+ tty->rx_buffer[tty->rx_write_idx] = buffer[i];
+ tty->rx_write_idx = (tty->rx_write_idx + 1) % EC_TTY_RX_BUFFER_SIZE;
+ }
+ }
+}
+
+/*****************************************************************************/
+
+/** \cond */
+
+module_init(ec_tty_init_module);
+module_exit(ec_tty_cleanup_module);
+
+EXPORT_SYMBOL(ectty_create);
+EXPORT_SYMBOL(ectty_free);
+EXPORT_SYMBOL(ectty_tx_data);
+EXPORT_SYMBOL(ectty_rx_data);
+
+/** \endcond */
+
+/*****************************************************************************/