# HG changeset patch # User Florian Pose # Date 1414415755 -3600 # Node ID e842688ccc5e1d6d33a214ab1ca3f7e8a9988dda # Parent 4839e81d2bdd875e58a89088903d1a9fbcdd7178# Parent 3339dcc91b88c83dc1c0db1d3f27039e1810dad3 merge. diff -r 3339dcc91b88 -r e842688ccc5e configure.ac --- a/configure.ac Mon Oct 27 13:41:01 2014 +0100 +++ b/configure.ac Mon Oct 27 14:15:55 2014 +0100 @@ -247,6 +247,29 @@ AC_SUBST(KERNEL_8139TOO,[$kernel8139too]) #------------------------------------------------------------------------------ +# CCAT driver +#------------------------------------------------------------------------------ + +AC_ARG_ENABLE([ccat], + AS_HELP_STRING([--enable-ccat], + [Enable CCAT driver]), + [ + case "${enableval}" in + yes) enableccat=1 + ;; + no) enableccat=0 + ;; + *) AC_MSG_ERROR([Invalid value for --enable-ccat]) + ;; + esac + ], + [enableccat=0] # disabled by default +) + +AM_CONDITIONAL(ENABLE_CCAT, test "x$enableccat" = "x1") +AC_SUBST(ENABLE_CCAT,[$enableccat]) + +#------------------------------------------------------------------------------ # e100 driver #------------------------------------------------------------------------------ @@ -1003,6 +1026,8 @@ Makefile devices/Kbuild devices/Makefile + devices/ccat/Kbuild + devices/ccat/Makefile devices/e1000/Kbuild devices/e1000/Makefile devices/e1000e/Kbuild diff -r 3339dcc91b88 -r e842688ccc5e devices/Kbuild.in --- a/devices/Kbuild.in Mon Oct 27 13:41:01 2014 +0100 +++ b/devices/Kbuild.in Mon Oct 27 14:15:55 2014 +0100 @@ -51,6 +51,10 @@ CFLAGS_$(EC_8139TOO_OBJ) = -DREV=$(REV) endif +ifeq (@ENABLE_CCAT@,1) + obj-m += ccat/ +endif + ifeq (@ENABLE_E100@,1) EC_E100_OBJ := e100-@KERNEL_E100@-ethercat.o obj-m += ec_e100.o diff -r 3339dcc91b88 -r e842688ccc5e devices/Makefile.am --- a/devices/Makefile.am Mon Oct 27 13:41:01 2014 +0100 +++ b/devices/Makefile.am Mon Oct 27 14:15:55 2014 +0100 @@ -28,10 +28,12 @@ #------------------------------------------------------------------------------ SUBDIRS = \ + ccat \ e1000 \ e1000e DIST_SUBDIRS = \ + ccat \ e1000 \ e1000e diff -r 3339dcc91b88 -r e842688ccc5e devices/ccat/CCatDefinitions.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/devices/ccat/CCatDefinitions.h Mon Oct 27 14:15:55 2014 +0100 @@ -0,0 +1,193 @@ +/** + Network Driver for Beckhoff CCAT communication controller + Copyright (C) 2014 Beckhoff Automation GmbH + Author: Patrick Bruenn + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +*/ +#ifndef _CCAT_DEFINITIONS_H_ +#define _CCAT_DEFINITIONS_H_ + +#ifndef WINDOWS +#include +typedef uint8_t BYTE; +typedef uint32_t ULONG; +typedef uint16_t USHORT; +typedef uint8_t UINT8; +typedef uint16_t UINT16; +typedef uint32_t UINT32; +typedef uint64_t UINT64; +#endif + +#define CCAT_DMA_FRAME_HEADER_LENGTH (196 / 8) // 196 bit + +typedef struct _ETHERNET_ADDRESS +{ + UINT8 b[6]; +}ETHERNET_ADDRESS; + +typedef enum CCatInfoTypes +{ + CCATINFO_NOTUSED = 0, + CCATINFO_BLOCK = 1, + CCATINFO_ETHERCAT_SLAVE = 2, + CCATINFO_ETHERCAT_MASTER = 3, + CCATINFO_ETHERNET_MAC = 4, + CCATINFO_ETHERNET_SWITCH = 5, + CCATINFO_SERCOS3 = 6, + CCATINFO_PROFIBUS = 7, + CCATINFO_CAN_CONTROLLER = 8, + CCATINFO_KBUS_MASTER = 9, + CCATINFO_IP_LINK = 10, + CCATINFO_SPI_MASTER = 11, + CCATINFO_I2C_MASTER = 12, + CCATINFO_GPIO = 13, + CCATINFO_DRIVEIP = 14, + CCATINFO_EPCS_PROM = 15, + CCATINFO_SYSTIME = 16, + CCATINFO_INTCTRL = 17, + CCATINFO_EEPROM = 18, + CCATINFO_DMA = 19, + CCATINFO_ETHERCAT_MASTER_DMA = 20, + CCATINFO_ETHERNET_MAC_DMA = 21, + CCATINFO_SRAM = 22, + CCATINFO_COPY_BLOCK = 23, + CCATINFO_MAX +} _CCatInfoTypes; + +typedef struct +{ + USHORT eCCatInfoType; + USHORT nRevision; + union + { + ULONG nParam; + struct + { + BYTE nMaxEntries; + BYTE compileDay; + BYTE compileMonth; + BYTE compileYear; + }; + struct + { + BYTE txDmaChn; + BYTE rxDmaChn; + }; + struct + { + BYTE nExternalDataSize : 2; + BYTE reserved1 : 6; + BYTE nRamSize; //size = 2^ramSize + USHORT reserved2; + }; + }; + ULONG nAddr; + ULONG nSize; +} CCatInfoBlock, *PCCatInfoBlock; + +typedef struct _CCatMacRegs +{ + union + { + struct + { + UINT8 frameLenErrCnt; + UINT8 rxErrCnt; + UINT8 crcErrCnt; + UINT8 linkLostErrCnt; + }; + UINT32 errCnt; + }; + UINT32 reserved1; + UINT8 dropFrameErrCnt; // 0x08 + UINT8 reserved2[7]; + UINT32 txFrameCnt; // 0x10 + UINT32 rxFrameCnt; // 0x14 + UINT32 reserved3[2]; + UINT8 txFifoLevel : 7; + UINT8 reserved4 : 1; + UINT8 reserved5[7]; + UINT8 txErrMemFull; + UINT8 reserved6[7]; + UINT32 reserved8[18]; + UINT8 miiConnected; +}CCatMacRegs; + +typedef struct _CCatMii +{ + USHORT startMiCycle : 1; + USHORT reserved1 : 6; + USHORT cmdErr : 1; +#define MII_CMD_READ 1 +#define MII_CMD_WRITE 2 + USHORT cmd : 2; + USHORT reserved2 : 6; + USHORT phyAddr : 5; + USHORT reserved3 : 3; + USHORT phyReg : 5; + USHORT reserved4 : 3; + USHORT phyWriteData; + USHORT phyReadData; + ETHERNET_ADDRESS macAddr; + USHORT macFilterEnabled : 1; + USHORT reserved6 : 7; + USHORT linkStatus : 1; + USHORT reserved7 : 7; + ULONG led0; + ULONG led1; + ULONG led2[2]; + ULONG systimeInsertion[4]; + ULONG interruptState[2]; + ULONG interruptMask[2]; +}CCatMii; + +typedef struct _CCatDmaTxFifo +{ + UINT32 startAddr : 24; + UINT32 numQuadWords : 8; + UINT32 reserved1; + UINT8 fifoReset; + UINT8 reserved2[7]; +}CCatDmaTxFifo; + +typedef union _CCatDmaRxActBuf +{ + struct + { + UINT32 startAddr : 24; + UINT32 reserved1 : 7; + UINT32 nextValid : 1; + UINT32 lastAddr : 24; + UINT32 reserved2 : 8; + UINT32 FifoLevel : 24; + UINT32 bufferLevel : 8; + UINT32 nextAddr; + }; + UINT32 rxActBuf; +}CCatDmaRxActBuf; + +typedef struct _CCatInfoBlockOffs +{ + UINT32 reserved; + UINT32 nMMIOffs; + UINT32 nTxFifoOffs; + UINT32 nMacRegOffs; + UINT32 nRxMemOffs; + UINT32 nTxMemOffs; + UINT32 nMiscOffs; +} CCatInfoBlockOffs; +#endif /* #ifndef _CCAT_DEFINITIONS_H_ */ + diff -r 3339dcc91b88 -r e842688ccc5e devices/ccat/COPYING --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/devices/ccat/COPYING Mon Oct 27 14:15:55 2014 +0100 @@ -0,0 +1,339 @@ + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 + + Copyright (C) 1989, 1991 Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This +General Public License applies to most of the Free Software +Foundation's software and to any other program whose authors commit to +using it. (Some other Free Software Foundation software is covered by +the GNU Lesser General Public License instead.) You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License applies to any program or other work which contains +a notice placed by the copyright holder saying it may be distributed +under the terms of this General Public License. The "Program", below, +refers to any such program or work, and a "work based on the Program" +means either the Program or any derivative work under copyright law: +that is to say, a work containing the Program or a portion of it, +either verbatim or with modifications and/or translated into another +language. (Hereinafter, translation is included without limitation in +the term "modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running the Program is not restricted, and the output from the Program +is covered only if its contents constitute a work based on the +Program (independent of having been made by running the Program). +Whether that is true depends on what the Program does. + + 1. You may copy and distribute verbatim copies of the Program's +source code as you receive it, in any medium, provided that you +conspicuously and appropriately publish on each copy an appropriate +copyright notice and disclaimer of warranty; keep intact all the +notices that refer to this License and to the absence of any warranty; +and give any other recipients of the Program a copy of this License +along with the Program. + +You may charge a fee for the physical act of transferring a copy, and +you may at your option offer warranty protection in exchange for a fee. + + 2. You may modify your copy or copies of the Program or any portion +of it, thus forming a work based on the Program, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + + c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide + a warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but + does not normally print such an announcement, your work based on + the Program is not required to print an announcement.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Program, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Program, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Program. + +In addition, mere aggregation of another work not based on the Program +with the Program (or with a work based on the Program) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may copy and distribute the Program (or a work based on it, +under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you also do one of the following: + + a) Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of Sections + 1 and 2 above on a medium customarily used for software interchange; or, + + b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange; or, + + c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with such + an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for +making modifications to it. For an executable work, complete source +code means all the source code for all modules it contains, plus any +associated interface definition files, plus the scripts used to +control compilation and installation of the executable. However, as a +special exception, the source code distributed need not include +anything that is normally distributed (in either source or binary +form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component +itself accompanies the executable. + +If distribution of executable or object code is made by offering +access to copy from a designated place, then offering equivalent +access to copy the source code from the same place counts as +distribution of the source code, even though third parties are not +compelled to copy the source along with the object code. + + 4. You may not copy, modify, sublicense, or distribute the Program +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense or distribute the Program is +void, and will automatically terminate your rights under this License. +However, parties who have received copies, or rights, from you under +this License will not have their licenses terminated so long as such +parties remain in full compliance. + + 5. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Program or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Program (or any work based on the +Program), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Program or works based on it. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the +original licensor to copy, distribute or modify the Program subject to +these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 7. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Program at all. For example, if a patent +license would not permit royalty-free redistribution of the Program by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Program. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system, which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 8. If the distribution and/or use of the Program is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Program under this License +may add an explicit geographical distribution limitation excluding +those countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 9. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of this License which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +this License, you may choose any version ever published by the Free Software +Foundation. + + 10. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + + Copyright (C) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) year name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, the commands you use may +be called something other than `show w' and `show c'; they could even be +mouse-clicks or menu items--whatever suits your program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the program + `Gnomovision' (which makes passes at compilers) written by James Hacker. + + , 1 April 1989 + Ty Coon, President of Vice + +This General Public License does not permit incorporating your program into +proprietary programs. If your program is a subroutine library, you may +consider it more useful to permit linking proprietary applications with the +library. If this is what you want to do, use the GNU Lesser General +Public License instead of this License. diff -r 3339dcc91b88 -r e842688ccc5e devices/ccat/Kbuild.in --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/devices/ccat/Kbuild.in Mon Oct 27 14:15:55 2014 +0100 @@ -0,0 +1,51 @@ +#------------------------------------------------------------------------------ +# +# $Id$ +# +# Copyright (C) 2006-2008 Florian Pose, Ingenieurgemeinschaft IgH +# +# This file is part of the IgH EtherCAT Master. +# +# The IgH EtherCAT Master is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License version 2, as +# published by the Free Software Foundation. +# +# The IgH EtherCAT Master is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General +# Public License for more details. +# +# You should have received a copy of the GNU General Public License along +# with the IgH EtherCAT Master; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# +# --- +# +# The license mentioned above concerns the source code only. Using the +# EtherCAT technology and brand is only permitted in compliance with the +# industrial property and similar rights of Beckhoff Automation GmbH. +# +# --- +# +# vim: syntax=make +# +#------------------------------------------------------------------------------ + +TOPDIR := $(src)/../.. + +ifeq (@ENABLE_CCAT@,1) + EC_CCAT_OBJ := \ + module.o \ + netdev.o \ + print.o \ + update.o + obj-m += ec_ccat.o + ec_ccat-objs := $(EC_CCAT_OBJ) + CFLAGS_ccat_main-ethercat.o = -DREV=$(REV) +endif + +KBUILD_EXTRA_SYMBOLS := \ + @abs_top_builddir@/$(LINUX_SYMVERS) \ + @abs_top_builddir@/master/$(LINUX_SYMVERS) + +#------------------------------------------------------------------------------ diff -r 3339dcc91b88 -r e842688ccc5e devices/ccat/Makefile.am --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/devices/ccat/Makefile.am Mon Oct 27 14:15:55 2014 +0100 @@ -0,0 +1,51 @@ +#------------------------------------------------------------------------------ +# +# $Id$ +# +# Copyright (C) 2006-2008 Florian Pose, Ingenieurgemeinschaft IgH +# +# This file is part of the IgH EtherCAT Master. +# +# The IgH EtherCAT Master is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License version 2, as +# published by the Free Software Foundation. +# +# The IgH EtherCAT Master is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General +# Public License for more details. +# +# You should have received a copy of the GNU General Public License along +# with the IgH EtherCAT Master; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# +# --- +# +# The license mentioned above concerns the source code only. Using the +# EtherCAT technology and brand is only permitted in compliance with the +# industrial property and similar rights of Beckhoff Automation GmbH. +# +#------------------------------------------------------------------------------ + +EXTRA_DIST = \ + COPYING \ + Kbuild.in \ + module.h \ + netdev.h \ + print.h \ + update.h + +BUILT_SOURCES = \ + Kbuild + +modules: + $(MAKE) -C "$(LINUX_SOURCE_DIR)" M="@abs_srcdir@" modules + +modules_install: + $(MAKE) -C "$(LINUX_SOURCE_DIR)" M="@abs_srcdir@" \ + INSTALL_MOD_DIR="$(INSTALL_MOD_DIR)" modules_install + +clean-local: + $(MAKE) -C "$(LINUX_SOURCE_DIR)" M="@abs_srcdir@" clean + +#------------------------------------------------------------------------------ diff -r 3339dcc91b88 -r e842688ccc5e devices/ccat/compat.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/devices/ccat/compat.h Mon Oct 27 14:15:55 2014 +0100 @@ -0,0 +1,48 @@ +/** + Network Driver for Beckhoff CCAT communication controller + Copyright (C) 2014 Beckhoff Automation GmbH + Author: Patrick Bruenn + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +*/ + +#ifndef _CCAT_COMPAT_H_ +#define _CCAT_COMPAT_H_ +#include +#include +#include + +#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 32) +#define pr_warn pr_info + +#define netdev_info(DEV, ...) pr_info(__VA_ARGS__) +#define netdev_err netdev_info + +static inline void *dma_zalloc_coherent(struct device *dev, size_t size, + dma_addr_t * dma_handle, gfp_t flag) +{ + void *result = + dma_alloc_coherent(dev, size, dma_handle, flag | __GFP_ZERO); + if (result) + memset(result, 0, size); + return result; +} + +static inline void usleep_range(unsigned long min, unsigned long max) +{ + msleep(min / 1000); +} +#endif +#endif /* #ifndef _CCAT_COMPAT_H_ */ diff -r 3339dcc91b88 -r e842688ccc5e devices/ccat/module.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/devices/ccat/module.c Mon Oct 27 14:15:55 2014 +0100 @@ -0,0 +1,306 @@ +/** + Network Driver for Beckhoff CCAT communication controller + Copyright (C) 2014 Beckhoff Automation GmbH + Author: Patrick Bruenn + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +*/ + +#include +#include +#include +#include +#include "compat.h" +#include "module.h" +#include "netdev.h" +#include "update.h" + +MODULE_DESCRIPTION(DRV_DESCRIPTION); +MODULE_AUTHOR("Patrick Bruenn "); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +static void ccat_bar_free(struct ccat_bar *bar) +{ + if (bar->ioaddr) { + const struct ccat_bar tmp = *bar; + memset(bar, 0, sizeof(*bar)); + iounmap(tmp.ioaddr); + release_mem_region(tmp.start, tmp.len); + } else { + pr_warn("%s(): %p was already done.\n", __FUNCTION__, bar); + } +} + +/** + * ccat_bar_init() - Initialize a CCAT pci bar + * @bar object which should be initialized + * @index 0 and 2 are valid for CCAT, meaning pci bar0 or pci bar2 + * @pdev the pci device as which the CCAT was recognized before + * + * Reading PCI config space; request and map memory region. + */ +static int ccat_bar_init(struct ccat_bar *bar, size_t index, + struct pci_dev *pdev) +{ + struct resource *res; + bar->start = pci_resource_start(pdev, index); + bar->end = pci_resource_end(pdev, index); + bar->len = pci_resource_len(pdev, index); + bar->flags = pci_resource_flags(pdev, index); + if (!(IORESOURCE_MEM & bar->flags)) { + pr_info("bar%llu is no mem_region -> abort.\n", + (uint64_t) index); + return -EIO; + } + + res = request_mem_region(bar->start, bar->len, DRV_NAME); + if (!res) { + pr_info("allocate mem_region failed.\n"); + return -EIO; + } + pr_debug("bar%llu at [%lx,%lx] len=%lu res: %p.\n", (uint64_t) index, + bar->start, bar->end, bar->len, res); + + bar->ioaddr = ioremap(bar->start, bar->len); + if (!bar->ioaddr) { + pr_info("bar%llu ioremap failed.\n", (uint64_t) index); + release_mem_region(bar->start, bar->len); + return -EIO; + } + pr_debug("bar%llu I/O mem mapped to %p.\n", (uint64_t) index, + bar->ioaddr); + return 0; +} + +void ccat_dma_free(struct ccat_dma *const dma) +{ + const struct ccat_dma tmp = *dma; + free_dma(dma->channel); + memset(dma, 0, sizeof(*dma)); + dma_free_coherent(tmp.dev, tmp.size, tmp.virt, tmp.phys); +} + +/** + * ccat_dma_init() - Initialize CCAT and host memory for DMA transfer + * @dma object for management data which will be initialized + * @channel number of the DMA channel + * @ioaddr of the pci bar2 configspace used to calculate the address of the pci dma configuration + * @dev which should be configured for DMA + */ +int ccat_dma_init(struct ccat_dma *const dma, size_t channel, + void __iomem * const ioaddr, struct device *const dev) +{ + void *frame; + uint64_t addr; + uint32_t translateAddr; + uint32_t memTranslate; + uint32_t memSize; + uint32_t data = 0xffffffff; + uint32_t offset = (sizeof(uint64_t) * channel) + 0x1000; + + dma->channel = channel; + dma->dev = dev; + + /* calculate size and alignments */ + iowrite32(data, ioaddr + offset); + wmb(); + data = ioread32(ioaddr + offset); + memTranslate = data & 0xfffffffc; + memSize = (~memTranslate) + 1; + dma->size = 2 * memSize - PAGE_SIZE; + dma->virt = dma_zalloc_coherent(dev, dma->size, &dma->phys, GFP_KERNEL); + if (!dma->virt || !dma->phys) { + pr_info("init DMA%llu memory failed.\n", (uint64_t) channel); + return -1; + } + + if (request_dma(channel, DRV_NAME)) { + pr_info("request dma channel %llu failed\n", + (uint64_t) channel); + ccat_dma_free(dma); + return -1; + } + + translateAddr = (dma->phys + memSize - PAGE_SIZE) & memTranslate; + addr = translateAddr; + memcpy_toio(ioaddr + offset, &addr, sizeof(addr)); + frame = dma->virt + translateAddr - dma->phys; + pr_debug + ("DMA%llu mem initialized\n virt: 0x%p\n phys: 0x%llx\n translated: 0x%llx\n pci addr: 0x%08x%x\n memTranslate: 0x%x\n size: %llu bytes.\n", + (uint64_t) channel, dma->virt, (uint64_t) (dma->phys), addr, + ioread32(ioaddr + offset + 4), ioread32(ioaddr + offset), + memTranslate, (uint64_t) dma->size); + return 0; +} + +/** + * Initialize all available CCAT functions. + * + * Return: count of failed functions + */ +static int ccat_functions_init(struct ccat_device *const ccatdev) +{ + /* read CCatInfoBlock.nMaxEntries from ccat */ + const uint8_t num_func = ioread8(ccatdev->bar[0].ioaddr + 4); + void __iomem *addr = ccatdev->bar[0].ioaddr; + const void __iomem *end = addr + (sizeof(CCatInfoBlock) * num_func); + int status = 0; //count init function failures + + while (addr < end) { + const uint8_t type = ioread16(addr); + switch (type) { + case CCATINFO_NOTUSED: + break; + case CCATINFO_EPCS_PROM: + pr_info("Found: CCAT update(EPCS_PROM) -> init()\n"); + ccatdev->update = ccat_update_init(ccatdev, addr); + status += (NULL == ccatdev->update); + break; + case CCATINFO_ETHERCAT_MASTER_DMA: + pr_info("Found: ETHERCAT_MASTER_DMA -> init()\n"); + ccatdev->ethdev = ccat_eth_init(ccatdev, addr); + status += (NULL == ccatdev->ethdev); + break; + default: + pr_info("Found: 0x%04x not supported\n", type); + break; + } + addr += sizeof(CCatInfoBlock); + } + return status; +} + +/** + * Destroy all previously initialized CCAT functions + */ +static void ccat_functions_remove(struct ccat_device *const ccatdev) +{ + if (!ccatdev->ethdev) { + pr_warn("%s(): 'ethdev' was not initialized.\n", __FUNCTION__); + } else { + struct ccat_eth_priv *const ethdev = ccatdev->ethdev; + ccatdev->ethdev = NULL; + ccat_eth_remove(ethdev); + } + if (!ccatdev->update) { + pr_warn("%s(): 'update' was not initialized.\n", __FUNCTION__); + } else { + struct ccat_update *const update = ccatdev->update; + ccatdev->update = NULL; + ccat_update_remove(update); + } +} + +static int ccat_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + int status; + u8 revision; + struct ccat_device *ccatdev = kmalloc(sizeof(*ccatdev), GFP_KERNEL); + if (!ccatdev) { + pr_err("%s() out of memory.\n", __FUNCTION__); + return -ENOMEM; + } + memset(ccatdev, 0, sizeof(*ccatdev)); + ccatdev->pdev = pdev; + pci_set_drvdata(pdev, ccatdev); + + status = pci_enable_device_mem(pdev); + if (status) { + pr_info("enable %s failed: %d\n", pdev->dev.kobj.name, status); + return status; + } + + status = pci_read_config_byte(pdev, PCI_REVISION_ID, &revision); + if (status) { + pr_warn("read CCAT pci revision failed with %d\n", status); + return status; + } + + /* FIXME upgrade to a newer kernel to get support of dma_set_mask_and_coherent() + * (!dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(64))) { + */ + if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) { + pr_debug("64 bit DMA supported, pci rev: %u\n", revision); + /*} else if (!dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32))) { */ + } else if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) { + pr_debug("32 bit DMA supported, pci rev: %u\n", revision); + } else { + pr_warn("No suitable DMA available, pci rev: %u\n", revision); + } + + if (ccat_bar_init(&ccatdev->bar[0], 0, pdev)) { + pr_warn("initialization of bar0 failed.\n"); + return -EIO; + } + + if (ccat_bar_init(&ccatdev->bar[2], 2, pdev)) { + pr_warn("initialization of bar2 failed.\n"); + return -EIO; + } + + pci_set_master(pdev); + if (ccat_functions_init(ccatdev)) { + pr_warn("some functions couldn't be initialized\n"); + } + return 0; +} + +static void ccat_remove(struct pci_dev *pdev) +{ + struct ccat_device *ccatdev = pci_get_drvdata(pdev); + if (ccatdev) { + ccat_functions_remove(ccatdev); + ccat_bar_free(&ccatdev->bar[2]); + ccat_bar_free(&ccatdev->bar[0]); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + kfree(ccatdev); + } + pr_debug("%s() done.\n", __FUNCTION__); +} + +#define PCI_DEVICE_ID_BECKHOFF_CCAT 0x5000 +#define PCI_VENDOR_ID_BECKHOFF 0x15EC + +static const struct pci_device_id pci_ids[] = { + {PCI_DEVICE(PCI_VENDOR_ID_BECKHOFF, PCI_DEVICE_ID_BECKHOFF_CCAT)}, + {0,}, +}; + +MODULE_DEVICE_TABLE(pci, pci_ids); + +static struct pci_driver pci_driver = { + .name = DRV_NAME, + .id_table = pci_ids, + .probe = ccat_probe, + .remove = ccat_remove, +}; + +static void ccat_exit_module(void) +{ + pci_unregister_driver(&pci_driver); +} + +static int ccat_init_module(void) +{ + BUILD_BUG_ON(offsetof(struct ccat_eth_frame, data) != + CCAT_DMA_FRAME_HEADER_LENGTH); + pr_info("%s, %s\n", DRV_DESCRIPTION, DRV_VERSION); + return pci_register_driver(&pci_driver); +} + +module_exit(ccat_exit_module); +module_init(ccat_init_module); diff -r 3339dcc91b88 -r e842688ccc5e devices/ccat/module.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/devices/ccat/module.h Mon Oct 27 14:15:55 2014 +0100 @@ -0,0 +1,208 @@ +/** + Network Driver for Beckhoff CCAT communication controller + Copyright (C) 2014 Beckhoff Automation GmbH + Author: Patrick Bruenn + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +*/ + +#ifndef _CCAT_H_ +#define _CCAT_H_ + +#include +#include +#include +#include "CCatDefinitions.h" +#include "../ecdev.h" + +#define DRV_NAME "ec_ccat" +#define DRV_EXTRAVERSION "-ec" +#define DRV_VERSION "0.8" DRV_EXTRAVERSION +#define DRV_DESCRIPTION "Beckhoff CCAT Ethernet/EtherCAT Network Driver" + +#undef pr_fmt +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +/** + * struct ccat_bar - CCAT PCI Base Address Register(BAR) configuration + * @start: start address of this BAR + * @end: end address of this BAR + * @len: length of this BAR + * @flags: flags set on this BAR + * @ioaddr: ioremapped address of this bar + */ +struct ccat_bar { + unsigned long start; + unsigned long end; + unsigned long len; + unsigned long flags; + void __iomem *ioaddr; +}; + +/** + * struct ccat_dma - CCAT DMA channel configuration + * @phys: device-viewed address(physical) of the associated DMA memory + * @virt: CPU-viewed address(virtual) of the associated DMA memory + * @size: number of bytes in the associated DMA memory + * @channel: CCAT DMA channel number + * @dev: valid struct device pointer + */ +struct ccat_dma { + dma_addr_t phys; + void *virt; + size_t size; + size_t channel; + struct device *dev; +}; + +extern void ccat_dma_free(struct ccat_dma *const dma); +extern int ccat_dma_init(struct ccat_dma *const dma, size_t channel, + void __iomem * const ioaddr, struct device *const dev); + +/** + * struct ccat_eth_frame - Ethernet frame with DMA descriptor header in front + * @reservedn: is not used and should always be set to 0 + * @received: used for reception, is set to 1 by the CCAT when data was written + * @length: number of bytes in the frame including the DMA header + * @sent: is set to 1 by the CCAT when data was transmitted + * @timestamp: a 64 bit EtherCAT timestamp + * @data: the bytes of the ethernet frame + */ +struct ccat_eth_frame { + uint32_t reserved1; + uint32_t received:1; + uint32_t reserved2:31; + uint16_t length; + uint16_t reserved3; + uint32_t sent:1; + uint32_t reserved4:31; + uint64_t timestamp; + uint8_t data[0x800 - 3 * sizeof(uint64_t)]; +}; + +/** + * struct ccat_eth_register - CCAT register addresses in the PCI BAR + * @mii: address of the CCAT management interface register + * @tx_fifo: address of the CCAT TX DMA fifo register + * @rx_fifo: address of the CCAT RX DMA fifo register + * @mac: address of the CCAT media access control register + * @rx_mem: address of the CCAT register holding the RX DMA address + * @tx_mem: address of the CCAT register holding the TX DMA address + * @misc: address of a CCAT register holding miscellaneous information + */ +struct ccat_eth_register { + void __iomem *mii; + void __iomem *tx_fifo; + void __iomem *rx_fifo; + void __iomem *mac; + void __iomem *rx_mem; + void __iomem *tx_mem; + void __iomem *misc; +}; + +/** + * struct ccat_eth_dma_fifo - CCAT RX or TX DMA fifo + * @add: callback used to add a frame to this fifo + * @reg: PCI register address of this DMA fifo + * @dma: information about the associated DMA memory + */ +struct ccat_eth_dma_fifo { + void (*add) (struct ccat_eth_frame *, struct ccat_eth_dma_fifo *); + void __iomem *reg; + struct ccat_dma dma; +}; + +/** + * struct ccat_device - CCAT device representation + * @pdev: pointer to the pci object allocated by the kernel + * @ethdev: CCAT Ethernet/EtherCAT Master (with DMA) function, NULL if function is not available or failed to initialize + * @update: CCAT Update function, NULL if function is not available or failed to initialize + * @bar [0] and [2] holding information about PCI BARs 0 and 2. + * + * One instance of a ccat_device should represent a physical CCAT. Since + * a CCAT is implemented as FPGA the available functions can vary so + * the function object pointers can be NULL. + * Extra note: you will recognize that PCI BAR1 is not used and is a + * waste of memory, thats true but right now, its very easy to use it + * this way. So we might optimize it later. + */ +struct ccat_device { + struct pci_dev *pdev; + struct ccat_eth_priv *ethdev; + struct ccat_update *update; + struct ccat_bar bar[3]; //TODO optimize this +}; + +/** + * struct ccat_eth_priv - CCAT Ethernet/EtherCAT Master function (netdev) + * @ccatdev: pointer to the parent struct ccat_device + * @netdev: the net_device structure used by the kernel networking stack + * @poll_thread: is used to poll status registers like link state + * @rx_thread: thread which does housekeeping of RX DMA descriptors + * @tx_thread: thread which does housekeeping of TX DMA descriptors + * @next_tx_frame: pointer to the next TX DMA descriptor, which the tx_thread should check for availablity + * @info: holds a copy of the CCAT Ethernet/EtherCAT Master function information block (read from PCI config space) + * @reg: register addresses in PCI config space of the Ethernet/EtherCAT Master function + * @rx_fifo: DMA fifo used for RX DMA descriptors + * @tx_fifo: DMA fifo used for TX DMA descriptors + * @rx_bytes: number of bytes received -> reported with ndo_get_stats64() + * @rx_dropped: number of received frames, which were dropped -> reported with ndo_get_stats64() + * @tx_bytes: number of bytes send -> reported with ndo_get_stats64() + * @tx_dropped: number of frames requested to send, which were dropped -> reported with ndo_get_stats64() + */ +struct ccat_eth_priv { + const struct ccat_device *ccatdev; + struct net_device *netdev; + struct task_struct *poll_thread; + struct task_struct *rx_thread; + struct task_struct *tx_thread; + const struct ccat_eth_frame *next_tx_frame; /* next frame the tx_thread should check for availability */ + CCatInfoBlock info; + struct ccat_eth_register reg; + struct ccat_eth_dma_fifo rx_fifo; + struct ccat_eth_dma_fifo tx_fifo; + atomic64_t rx_bytes; + atomic64_t rx_dropped; + atomic64_t tx_bytes; + atomic64_t tx_dropped; + ec_device_t *ecdev; + void (*carrier_off) (struct net_device * const netdev); + void (*carrier_on) (struct net_device * const netdev); + void (*kfree_skb_any) (struct sk_buff * skb); + void (*start_queue) (struct net_device * const netdev); + void (*stop_queue) (struct net_device * const netdev); + void (*tx_fifo_full) (struct net_device * const dev, + const struct ccat_eth_frame * const frame); + void (*unregister) (struct net_device * const netdev); +}; + +/** + * struct ccat_update - CCAT Update function (update) + * @ccatdev: pointer to the parent struct ccat_device + * @ioaddr: PCI base address of the CCAT Update function + * dev: device number for this update function + * cdev: character device used for the CCAT Update function + * class: pointer to a device class used when registering the CCAT Update device + * @info: holds a copy of the CCAT Update function information block (read from PCI config space) + */ +struct ccat_update { + struct kref refcount; + void __iomem *ioaddr; + dev_t dev; + struct cdev cdev; + struct class *class; + CCatInfoBlock info; +}; +#endif /* #ifndef _CCAT_H_ */ diff -r 3339dcc91b88 -r e842688ccc5e devices/ccat/netdev.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/devices/ccat/netdev.c Mon Oct 27 14:15:55 2014 +0100 @@ -0,0 +1,595 @@ +/** + Network Driver for Beckhoff CCAT communication controller + Copyright (C) 2014 Beckhoff Automation GmbH + Author: Patrick Bruenn + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "compat.h" +#include "module.h" +#include "netdev.h" +#include "print.h" + +/** + * EtherCAT frame to enable forwarding on EtherCAT Terminals + */ +static const UINT8 frameForwardEthernetFrames[] = { + 0x01, 0x01, 0x05, 0x01, 0x00, 0x00, + 0x00, 0x1b, 0x21, 0x36, 0x1b, 0xce, + 0x88, 0xa4, 0x0e, 0x10, + 0x08, + 0x00, + 0x00, 0x00, + 0x00, 0x01, + 0x02, 0x00, + 0x00, 0x00, + 0x00, 0x00, + 0x00, 0x00 +}; + +#define FIFO_LENGTH 64 +#define DMA_POLL_DELAY_RANGE_USECS 100, 100 /* time to sleep between rx/tx DMA polls */ +#define POLL_DELAY_RANGE_USECS 500, 1000 /* time to sleep between link state polls */ + +static void ec_poll(struct net_device *dev); +static int run_poll_thread(void *data); +static int run_rx_thread(void *data); +static int run_tx_thread(void *data); + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35) +static struct rtnl_link_stats64 *ccat_eth_get_stats64(struct net_device *dev, struct rtnl_link_stats64 + *storage); +#endif +static int ccat_eth_open(struct net_device *dev); +static netdev_tx_t ccat_eth_start_xmit(struct sk_buff *skb, + struct net_device *dev); +static int ccat_eth_stop(struct net_device *dev); +static void ccat_eth_xmit_raw(struct net_device *dev, const char *data, + size_t len); + +static const struct net_device_ops ccat_eth_netdev_ops = { +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35) + .ndo_get_stats64 = ccat_eth_get_stats64, +#endif + .ndo_open = ccat_eth_open, + .ndo_start_xmit = ccat_eth_start_xmit, + .ndo_stop = ccat_eth_stop, +}; + +static void ecdev_kfree_skb_any(struct sk_buff *skb) +{ + /* never release a skb in EtherCAT mode */ +} + +static void ecdev_carrier_on(struct net_device *const netdev) +{ + struct ccat_eth_priv *const priv = netdev_priv(netdev); + ecdev_set_link(priv->ecdev, 1); +} + +static void ecdev_carrier_off(struct net_device *const netdev) +{ + struct ccat_eth_priv *const priv = netdev_priv(netdev); + ecdev_set_link(priv->ecdev, 0); +} + +static void ecdev_nop(struct net_device *const netdev) +{ + /* dummy called if nothing has to be done in EtherCAT operation mode */ +} + +static void ecdev_tx_fifo_full(struct net_device *const dev, + const struct ccat_eth_frame *const frame) +{ + /* we are polled -> there is nothing we can do in EtherCAT mode */ +} + +static void unregister_ecdev(struct net_device *const netdev) +{ + struct ccat_eth_priv *const priv = netdev_priv(netdev); + ecdev_close(priv->ecdev); + ecdev_withdraw(priv->ecdev); +} + +typedef void (*fifo_add_function) (struct ccat_eth_frame *, + struct ccat_eth_dma_fifo *); + +static void ccat_eth_rx_fifo_add(struct ccat_eth_frame *frame, + struct ccat_eth_dma_fifo *fifo) +{ + const size_t offset = ((void *)(frame) - fifo->dma.virt); + const uint32_t addr_and_length = (1 << 31) | offset; + frame->received = 0; + iowrite32(addr_and_length, fifo->reg); +} + +static void ccat_eth_tx_fifo_add_free(struct ccat_eth_frame *frame, + struct ccat_eth_dma_fifo *fifo) +{ + /* mark frame as ready to use for tx */ + frame->sent = 1; +} + +static void ccat_eth_tx_fifo_full(struct net_device *const dev, + const struct ccat_eth_frame *const frame) +{ + struct ccat_eth_priv *const priv = netdev_priv(dev); + netif_stop_queue(dev); + priv->next_tx_frame = frame; + wake_up_process(priv->tx_thread); +} + +static void ccat_eth_dma_fifo_reset(struct ccat_eth_dma_fifo *fifo) +{ + struct ccat_eth_frame *frame = fifo->dma.virt; + const struct ccat_eth_frame *const end = frame + FIFO_LENGTH; + + /* reset hw fifo */ + iowrite32(0, fifo->reg + 0x8); + wmb(); + + if (fifo->add) { + while (frame < end) { + fifo->add(frame, fifo); + ++frame; + } + } +} + +static int ccat_eth_dma_fifo_init(struct ccat_eth_dma_fifo *fifo, + void __iomem * const fifo_reg, + fifo_add_function add, size_t channel, + struct ccat_eth_priv *const priv) +{ + if (0 != + ccat_dma_init(&fifo->dma, channel, priv->ccatdev->bar[2].ioaddr, + &priv->ccatdev->pdev->dev)) { + pr_info("init DMA%llu memory failed.\n", (uint64_t) channel); + return -1; + } + fifo->add = add; + fifo->reg = fifo_reg; + return 0; +} + +/** + * Stop both (Rx/Tx) DMA fifo's and free related management structures + */ +static void ccat_eth_priv_free_dma(struct ccat_eth_priv *priv) +{ + /* reset hw fifo's */ + iowrite32(0, priv->rx_fifo.reg + 0x8); + iowrite32(0, priv->tx_fifo.reg + 0x8); + wmb(); + + /* release dma */ + ccat_dma_free(&priv->rx_fifo.dma); + ccat_dma_free(&priv->tx_fifo.dma); + pr_debug("DMA fifo's stopped.\n"); +} + +/** + * Initalizes both (Rx/Tx) DMA fifo's and related management structures + */ +static int ccat_eth_priv_init_dma(struct ccat_eth_priv *priv) +{ + if (ccat_eth_dma_fifo_init + (&priv->rx_fifo, priv->reg.rx_fifo, ccat_eth_rx_fifo_add, + priv->info.rxDmaChn, priv)) { + pr_warn("init Rx DMA fifo failed.\n"); + return -1; + } + + if (ccat_eth_dma_fifo_init + (&priv->tx_fifo, priv->reg.tx_fifo, ccat_eth_tx_fifo_add_free, + priv->info.txDmaChn, priv)) { + pr_warn("init Tx DMA fifo failed.\n"); + ccat_dma_free(&priv->rx_fifo.dma); + return -1; + } + + /* disable MAC filter */ + iowrite8(0, priv->reg.mii + 0x8 + 6); + wmb(); + return 0; +} + +/** + * Initializes the CCat... members of the ccat_eth_priv structure. + * Call this function only if info and ioaddr are already initialized! + */ +static void ccat_eth_priv_init_mappings(struct ccat_eth_priv *priv) +{ + CCatInfoBlockOffs offsets; + void __iomem *const func_base = + priv->ccatdev->bar[0].ioaddr + priv->info.nAddr; + memcpy_fromio(&offsets, func_base, sizeof(offsets)); + priv->reg.mii = func_base + offsets.nMMIOffs; + priv->reg.tx_fifo = func_base + offsets.nTxFifoOffs; + priv->reg.rx_fifo = func_base + offsets.nTxFifoOffs + 0x10; + priv->reg.mac = func_base + offsets.nMacRegOffs; + priv->reg.rx_mem = func_base + offsets.nRxMemOffs; + priv->reg.tx_mem = func_base + offsets.nTxMemOffs; + priv->reg.misc = func_base + offsets.nMiscOffs; +} + +/** + * Read link state from CCAT hardware + * @return 1 if link is up, 0 if not + */ +inline static size_t ccat_eth_priv_read_link_state(const struct ccat_eth_priv + *const priv) +{ + return (1 << 24) == (ioread32(priv->reg.mii + 0x8 + 4) & (1 << 24)); +} + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35) +static struct rtnl_link_stats64 *ccat_eth_get_stats64(struct net_device *dev, struct rtnl_link_stats64 + *storage) +{ + struct ccat_eth_priv *const priv = netdev_priv(dev); + CCatMacRegs mac; + memcpy_fromio(&mac, priv->reg.mac, sizeof(mac)); + storage->rx_packets = mac.rxFrameCnt; /* total packets received */ + storage->tx_packets = mac.txFrameCnt; /* total packets transmitted */ + storage->rx_bytes = atomic64_read(&priv->rx_bytes); /* total bytes received */ + storage->tx_bytes = atomic64_read(&priv->tx_bytes); /* total bytes transmitted */ + storage->rx_errors = mac.frameLenErrCnt + mac.dropFrameErrCnt + mac.crcErrCnt + mac.rxErrCnt; /* bad packets received */ + //TODO __u64 tx_errors; /* packet transmit problems */ + storage->rx_dropped = atomic64_read(&priv->rx_dropped); /* no space in linux buffers */ + storage->tx_dropped = atomic64_read(&priv->tx_dropped); /* no space available in linux */ + //TODO __u64 multicast; /* multicast packets received */ + //TODO __u64 collisions; + + /* detailed rx_errors: */ + storage->rx_length_errors = mac.frameLenErrCnt; + storage->rx_over_errors = mac.dropFrameErrCnt; /* receiver ring buff overflow */ + storage->rx_crc_errors = mac.crcErrCnt; /* recved pkt with crc error */ + storage->rx_frame_errors = mac.rxErrCnt; /* recv'd frame alignment error */ + storage->rx_fifo_errors = mac.dropFrameErrCnt; /* recv'r fifo overrun */ + //TODO __u64 rx_missed_errors; /* receiver missed packet */ + + /* detailed tx_errors */ + //TODO __u64 tx_aborted_errors; + //TODO __u64 tx_carrier_errors; + //TODO __u64 tx_fifo_errors; + //TODO __u64 tx_heartbeat_errors; + //TODO __u64 tx_window_errors; + + /* for cslip etc */ + //TODO __u64 rx_compressed; + //TODO __u64 tx_compressed; + return storage; +} +#endif + +struct ccat_eth_priv *ccat_eth_init(const struct ccat_device *const ccatdev, + const void __iomem * const addr) +{ + struct ccat_eth_priv *priv; + struct net_device *const netdev = alloc_etherdev(sizeof(*priv)); + priv = netdev_priv(netdev); + priv->netdev = netdev; + priv->ccatdev = ccatdev; + + /* ccat register mappings */ + memcpy_fromio(&priv->info, addr, sizeof(priv->info)); + ccat_eth_priv_init_mappings(priv); + ccat_print_function_info(priv); + + if (ccat_eth_priv_init_dma(priv)) { + pr_warn("%s(): DMA initialization failed.\n", __FUNCTION__); + free_netdev(netdev); + return NULL; + } + + /* init netdev with MAC and stack callbacks */ + memcpy_fromio(netdev->dev_addr, priv->reg.mii + 8, 6); + netdev->netdev_ops = &ccat_eth_netdev_ops; + + /* use as EtherCAT device? */ + priv->ecdev = ecdev_offer(netdev, ec_poll, THIS_MODULE); + if (priv->ecdev) { + priv->carrier_off = ecdev_carrier_off; + priv->carrier_on = ecdev_carrier_on; + priv->kfree_skb_any = ecdev_kfree_skb_any; + priv->start_queue = ecdev_nop; + priv->stop_queue = ecdev_nop; + priv->tx_fifo_full = ecdev_tx_fifo_full; + priv->unregister = unregister_ecdev; + if (ecdev_open(priv->ecdev)) { + pr_info("unable to register network device.\n"); + ecdev_withdraw(priv->ecdev); + ccat_eth_priv_free_dma(priv); + free_netdev(netdev); + return NULL; + } + return priv; + } + + /* EtherCAT disabled -> prepare normal ethernet mode */ + priv->carrier_off = netif_carrier_off; + priv->carrier_on = netif_carrier_on; + priv->kfree_skb_any = dev_kfree_skb_any; + priv->start_queue = netif_start_queue; + priv->stop_queue = netif_stop_queue; + priv->tx_fifo_full = ccat_eth_tx_fifo_full; + priv->unregister = unregister_netdev; + if (register_netdev(netdev)) { + pr_info("unable to register network device.\n"); + ccat_eth_priv_free_dma(priv); + free_netdev(netdev); + return NULL; + } + pr_info("registered %s as network device.\n", netdev->name); + priv->rx_thread = kthread_run(run_rx_thread, netdev, "%s_rx", DRV_NAME); + priv->tx_thread = kthread_run(run_tx_thread, netdev, "%s_tx", DRV_NAME); + return priv; +} + +void ccat_eth_remove(struct ccat_eth_priv *const priv) +{ + if (priv->rx_thread) { + kthread_stop(priv->rx_thread); + } + if (priv->tx_thread) { + kthread_stop(priv->tx_thread); + } + priv->unregister(priv->netdev); + ccat_eth_priv_free_dma(priv); + free_netdev(priv->netdev); + pr_debug("%s(): done\n", __FUNCTION__); +} + +static int ccat_eth_open(struct net_device *dev) +{ + struct ccat_eth_priv *const priv = netdev_priv(dev); + priv->carrier_off(dev); + priv->poll_thread = + kthread_run(run_poll_thread, dev, "%s_poll", DRV_NAME); + + //TODO + return 0; +} + +static const size_t CCATRXDESC_HEADER_LEN = 20; +static void ccat_eth_receive(struct net_device *const dev, + const struct ccat_eth_frame *const frame) +{ + struct ccat_eth_priv *const priv = netdev_priv(dev); + const size_t len = frame->length - CCATRXDESC_HEADER_LEN; + struct sk_buff *skb = dev_alloc_skb(len + NET_IP_ALIGN); + if (!skb) { + pr_info("%s() out of memory :-(\n", __FUNCTION__); + atomic64_inc(&priv->rx_dropped); + return; + } + skb->dev = dev; + skb_reserve(skb, NET_IP_ALIGN); + skb_copy_to_linear_data(skb, frame->data, len); + skb_put(skb, len); + skb->protocol = eth_type_trans(skb, dev); + skb->ip_summed = CHECKSUM_UNNECESSARY; + atomic64_add(len, &priv->rx_bytes); + netif_rx(skb); +} + +/** + * Rx handler in EtherCAT operation mode + * priv->ecdev should always be valid! + */ +static void ec_poll(struct net_device *dev) +{ + static size_t next = 0; + struct ccat_eth_priv *const priv = netdev_priv(dev); + struct ccat_eth_frame *frame = + ((struct ccat_eth_frame *)priv->rx_fifo.dma.virt) + next; + if (frame->received) { + ecdev_receive(priv->ecdev, frame->data, + frame->length - CCATRXDESC_HEADER_LEN); + frame->received = 0; + ccat_eth_rx_fifo_add(frame, &priv->rx_fifo); + next = (next + 1) % FIFO_LENGTH; + } else { + //TODO dev_warn(&dev->dev, "%s(): frame was not ready\n", __FUNCTION__); + } +} + +static netdev_tx_t ccat_eth_start_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + static size_t next = 0; + struct ccat_eth_priv *const priv = netdev_priv(dev); + struct ccat_eth_frame *const frame = + ((struct ccat_eth_frame *)priv->tx_fifo.dma.virt); + uint32_t addr_and_length; + + if (skb_is_nonlinear(skb)) { + pr_warn("Non linear skb not supported -> drop frame.\n"); + atomic64_inc(&priv->tx_dropped); + priv->kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + if (skb->len > sizeof(frame->data)) { + pr_warn("skb.len %llu exceeds dma buffer %llu -> drop frame.\n", + (uint64_t) skb->len, (uint64_t) sizeof(frame->data)); + atomic64_inc(&priv->tx_dropped); + priv->kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + if (!frame[next].sent) { + netdev_err(dev, "BUG! Tx Ring full when queue awake!\n"); + ccat_eth_tx_fifo_full(dev, &frame[next]); + return NETDEV_TX_BUSY; + } + + /* prepare frame in DMA memory */ + frame[next].sent = 0; + frame[next].length = skb->len; + memcpy(frame[next].data, skb->data, skb->len); + + priv->kfree_skb_any(skb); + + addr_and_length = 8 + (next * sizeof(*frame)); + addr_and_length += + ((frame[next].length + CCAT_DMA_FRAME_HEADER_LENGTH) / 8) << 24; + iowrite32(addr_and_length, priv->reg.tx_fifo); /* add to DMA fifo */ + atomic64_add(frame[next].length, &priv->tx_bytes); /* update stats */ + + next = (next + 1) % FIFO_LENGTH; + /* stop queue if tx ring is full */ + if (!frame[next].sent) { + ccat_eth_tx_fifo_full(dev, &frame[next]); + } + return NETDEV_TX_OK; +} + +static int ccat_eth_stop(struct net_device *dev) +{ + struct ccat_eth_priv *const priv = netdev_priv(dev); + priv->stop_queue(dev); + if (priv->poll_thread) { + /* TODO care about smp context? */ + kthread_stop(priv->poll_thread); + priv->poll_thread = NULL; + } + netdev_info(dev, "stopped.\n"); + return 0; +} + +static void ccat_eth_link_down(struct net_device *dev) +{ + struct ccat_eth_priv *const priv = netdev_priv(dev); + priv->stop_queue(dev); + priv->carrier_off(dev); + netdev_info(dev, "NIC Link is Down\n"); +} + +static void ccat_eth_link_up(struct net_device *const dev) +{ + struct ccat_eth_priv *const priv = netdev_priv(dev); + netdev_info(dev, "NIC Link is Up\n"); + /* TODO netdev_info(dev, "NIC Link is Up %u Mbps %s Duplex\n", + speed == SPEED_100 ? 100 : 10, + cmd.duplex == DUPLEX_FULL ? "Full" : "Half"); */ + + ccat_eth_dma_fifo_reset(&priv->rx_fifo); + ccat_eth_dma_fifo_reset(&priv->tx_fifo); + ccat_eth_xmit_raw(dev, frameForwardEthernetFrames, + sizeof(frameForwardEthernetFrames)); + priv->carrier_on(dev); + priv->start_queue(dev); +} + +/** + * Function to transmit a raw buffer to the network (f.e. frameForwardEthernetFrames) + * @dev a valid net_device + * @data pointer to your raw buffer + * @len number of bytes in the raw buffer to transmit + */ +static void ccat_eth_xmit_raw(struct net_device *dev, const char *const data, + size_t len) +{ + struct sk_buff *skb = dev_alloc_skb(len); + skb->dev = dev; + skb_copy_to_linear_data(skb, data, len); + skb_put(skb, len); + ccat_eth_start_xmit(skb, dev); +} + +/** + * Since CCAT doesn't support interrupts until now, we have to poll + * some status bits to recognize things like link change etc. + */ +static int run_poll_thread(void *data) +{ + struct net_device *const dev = (struct net_device *)data; + struct ccat_eth_priv *const priv = netdev_priv(dev); + size_t link = 0; + + while (!kthread_should_stop()) { + if (ccat_eth_priv_read_link_state(priv) != link) { + link = !link; + link ? ccat_eth_link_up(dev) : ccat_eth_link_down(dev); + } + usleep_range(POLL_DELAY_RANGE_USECS); + } + pr_debug("%s() stopped.\n", __FUNCTION__); + return 0; +} + +static int run_rx_thread(void *data) +{ + struct net_device *const dev = (struct net_device *)data; + struct ccat_eth_priv *const priv = netdev_priv(dev); + struct ccat_eth_frame *frame = priv->rx_fifo.dma.virt; + const struct ccat_eth_frame *const end = frame + FIFO_LENGTH; + + while (!kthread_should_stop()) { + /* wait until frame was used by DMA for Rx */ + while (!kthread_should_stop() && !frame->received) { + usleep_range(DMA_POLL_DELAY_RANGE_USECS); + } + + /* can be NULL, if we are asked to stop! */ + if (frame->received) { + ccat_eth_receive(dev, frame); + frame->received = 0; + ccat_eth_rx_fifo_add(frame, &priv->rx_fifo); + } + if (++frame >= end) { + frame = priv->rx_fifo.dma.virt; + } + } + pr_debug("%s() stopped.\n", __FUNCTION__); + return 0; +} + +/** + * Polling of tx dma descriptors in ethernet operating mode + */ +static int run_tx_thread(void *data) +{ + struct net_device *const dev = (struct net_device *)data; + struct ccat_eth_priv *const priv = netdev_priv(dev); + + set_current_state(TASK_INTERRUPTIBLE); + while (!kthread_should_stop()) { + const struct ccat_eth_frame *const frame = priv->next_tx_frame; + if (frame) { + while (!kthread_should_stop() && !frame->sent) { + usleep_range(DMA_POLL_DELAY_RANGE_USECS); + } + } + netif_wake_queue(dev); + schedule(); + set_current_state(TASK_INTERRUPTIBLE); + } + set_current_state(TASK_RUNNING); + pr_debug("%s() stopped.\n", __FUNCTION__); + return 0; +} diff -r 3339dcc91b88 -r e842688ccc5e devices/ccat/netdev.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/devices/ccat/netdev.h Mon Oct 27 14:15:55 2014 +0100 @@ -0,0 +1,26 @@ +/** + Network Driver for Beckhoff CCAT communication controller + Copyright (C) 2014 Beckhoff Automation GmbH + Author: Patrick Bruenn + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +*/ + +#ifndef _NETDEV_H_ +#define _NETDEV_H_ +extern struct ccat_eth_priv *ccat_eth_init(const struct ccat_device *ccatdev, + const void __iomem * addr); +extern void ccat_eth_remove(struct ccat_eth_priv *priv); +#endif /* #ifndef _NETDEV_H_ */ diff -r 3339dcc91b88 -r e842688ccc5e devices/ccat/print.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/devices/ccat/print.c Mon Oct 27 14:15:55 2014 +0100 @@ -0,0 +1,180 @@ +/** + Network Driver for Beckhoff CCAT communication controller + Copyright (C) 2014 Beckhoff Automation GmbH + Author: Patrick Bruenn + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +*/ + +#include +#include "CCatDefinitions.h" +#include "module.h" +#include "print.h" + +#define TESTING_ENABLED 1 +void print_mem(const unsigned char *p, size_t lines) +{ +#if TESTING_ENABLED + pr_info("mem at: %p\n", p); + pr_info(" 0 1 2 3 4 5 6 7 8 9 A B C D E F\n"); + while (lines > 0) { + pr_info + ("%02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x\n", + p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7], p[8], p[9], + p[10], p[11], p[12], p[13], p[14], p[15]); + p += 16; + --lines; + } +#endif /* #if TESTING_ENABLED */ +} + +static const char *CCatFunctionTypes[CCATINFO_MAX + 1] = { + "not used", + "Informationblock", + "EtherCAT Slave", + "EtherCAT Master without DMA", + "Ethernet MAC without DMA", + "Ethernet Switch", + "Sercos III", + "Profibus", + "CAN Controller", + "KBUS Master", + "IP-Link Master (planned)", + "SPI Master", + "I²C", + "GPIO", + "Drive", + "CCAT Update", + "Systemtime", + "Interrupt Controller", + "EEPROM Controller", + "DMA Controller", + "EtherCAT Master with DMA", + "Ethernet MAC with DMA", + "SRAM Interface", + "Internal Copy block", + "unknown" +}; + +static void print_CCatDmaRxActBuf(const struct ccat_eth_priv *const priv) +{ + CCatDmaRxActBuf rx_fifo; + memcpy_fromio(&rx_fifo, priv->reg.rx_fifo, sizeof(rx_fifo)); + pr_debug("Rx FIFO base address: %p\n", priv->reg.rx_fifo); + pr_debug(" Rx Frame Header start: 0x%08x\n", rx_fifo.startAddr); + pr_debug(" reserved: 0x%08x\n", rx_fifo.reserved1); + pr_debug(" Rx start address valid: %8u\n", rx_fifo.nextValid); + pr_debug(" reserved: 0x%08x\n", rx_fifo.reserved2); + pr_debug(" FIFO level: 0x%08x\n", rx_fifo.FifoLevel); + pr_debug(" Buffer level: 0x%08x\n", rx_fifo.bufferLevel); + pr_debug(" next address: 0x%08x\n", rx_fifo.nextAddr); +} + +static void print_CCatDmaTxFifo(const struct ccat_eth_priv *const priv) +{ + CCatDmaTxFifo tx_fifo; + memcpy_fromio(&tx_fifo, priv->reg.tx_fifo, sizeof(tx_fifo)); + pr_debug("Tx FIFO base address: %p\n", priv->reg.tx_fifo); + pr_debug(" Tx Frame Header start: 0x%08x\n", tx_fifo.startAddr); + pr_debug(" # 64 bit words: %10d\n", tx_fifo.numQuadWords); + pr_debug(" reserved: 0x%08x\n", tx_fifo.reserved1); + pr_debug(" FIFO reset: 0x%08x\n", tx_fifo.fifoReset); +} + +static void print_CCatInfoBlock(const CCatInfoBlock * info, + const void __iomem * const base_addr) +{ + const size_t index = min((int)info->eCCatInfoType, CCATINFO_MAX); + pr_debug("%s\n", CCatFunctionTypes[index]); + pr_debug(" revision: 0x%x\n", info->nRevision); + pr_debug(" RX channel: %d\n", info->rxDmaChn); + pr_debug(" TX channel: %d\n", info->txDmaChn); + pr_debug(" baseaddr: 0x%x\n", info->nAddr); + pr_debug(" size: 0x%x\n", info->nSize); + pr_debug(" subfunction: %p\n", base_addr); +} + +static void print_CCatMacRegs(const struct ccat_eth_priv *const priv) +{ + CCatMacRegs mac; + memcpy_fromio(&mac, priv->reg.mac, sizeof(mac)); + pr_debug("MAC base address: %p\n", priv->reg.mac); + pr_debug(" frame length error count: %10d\n", mac.frameLenErrCnt); + pr_debug(" RX error count: %10d\n", mac.rxErrCnt); + pr_debug(" CRC error count: %10d\n", mac.crcErrCnt); + pr_debug(" Link lost error count: %10d\n", mac.linkLostErrCnt); + pr_debug(" reserved: 0x%08x\n", mac.reserved1); + pr_debug(" RX overflow count: %10d\n", + mac.dropFrameErrCnt); + pr_debug(" DMA overflow count: %10d\n", mac.reserved2[0]); + //pr_debug(" reserverd: %10d\n", DRV_NAME, mac.reserved2[1]); + pr_debug(" TX frame counter: %10d\n", mac.txFrameCnt); + pr_debug(" RX frame counter: %10d\n", mac.rxFrameCnt); + pr_debug(" TX-FIFO level: 0x%08x\n", mac.txFifoLevel); + pr_debug(" MII connection: 0x%08x\n", mac.miiConnected); +} + +static void print_CCatMii(const struct ccat_eth_priv *const priv) +{ + CCatMii mii; + memcpy_fromio(&mii, priv->reg.mii, sizeof(mii)); + pr_debug("MII base address: %p\n", priv->reg.mii); + pr_debug(" MII cycle: %s\n", + mii.startMiCycle ? "running" : "no cycle"); + pr_debug(" reserved: 0x%x\n", mii.reserved1); + pr_debug(" cmd valid: %s\n", mii.cmdErr ? "no" : "yes"); + pr_debug(" cmd: 0x%x\n", mii.cmd); + pr_debug(" reserved: 0x%x\n", mii.reserved2); + pr_debug(" PHY addr: 0x%x\n", mii.phyAddr); + pr_debug(" reserved: 0x%x\n", mii.reserved3); + pr_debug(" PHY reg: 0x%x\n", mii.phyReg); + pr_debug(" reserved: 0x%x\n", mii.reserved4); + pr_debug(" PHY write: 0x%x\n", mii.phyWriteData); + pr_debug(" PHY read: 0x%x\n", mii.phyReadData); + pr_debug(" MAC addr: %02x:%02x:%02x:%02x:%02x:%02x\n", + mii.macAddr.b[0], mii.macAddr.b[1], mii.macAddr.b[2], + mii.macAddr.b[3], mii.macAddr.b[4], mii.macAddr.b[5]); + pr_debug(" MAC filter enable: %s\n", + mii.macFilterEnabled ? "enabled" : "disabled"); + pr_debug(" reserved: 0x%x\n", mii.reserved6); + pr_debug(" Link State: %s\n", + mii.linkStatus ? "link" : "no link"); + pr_debug(" reserved: 0x%x\n", mii.reserved7); + //pr_debug(" reserved: 0x%x\n", DRV_NAME, mii.reserved8); + //TODO add leds, systemtime insertion and interrupts +} + +void ccat_print_function_info(struct ccat_eth_priv *priv) +{ + print_CCatInfoBlock(&priv->info, priv->ccatdev->bar[0].ioaddr); + print_CCatMii(priv); + print_CCatDmaTxFifo(priv); + print_CCatDmaRxActBuf(priv); + print_CCatMacRegs(priv); + pr_debug(" RX window: %p\n", priv->reg.rx_mem); + pr_debug(" TX memory: %p\n", priv->reg.tx_mem); + pr_debug(" misc: %p\n", priv->reg.misc); +} + +void print_update_info(const CCatInfoBlock * const info, + void __iomem * const ioaddr) +{ + const size_t index = min((int)info->eCCatInfoType, CCATINFO_MAX); + pr_debug("%s\n", CCatFunctionTypes[index]); + pr_debug(" revision: 0x%x\n", info->nRevision); + pr_debug(" baseaddr: 0x%x\n", info->nAddr); + pr_debug(" size: 0x%x\n", info->nSize); + pr_debug(" PROM ID is: 0x%x\n", ccat_get_prom_id(ioaddr)); +} diff -r 3339dcc91b88 -r e842688ccc5e devices/ccat/print.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/devices/ccat/print.h Mon Oct 27 14:15:55 2014 +0100 @@ -0,0 +1,30 @@ +/** + Network Driver for Beckhoff CCAT communication controller + Copyright (C) 2014 Beckhoff Automation GmbH + Author: Patrick Bruenn + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +*/ + +#ifndef _PRINT_H_ +#define _PRINT_H_ + +#include "update.h" + +extern void ccat_print_function_info(struct ccat_eth_priv *priv); +extern void print_mem(const unsigned char *p, size_t lines); +extern void print_update_info(const CCatInfoBlock * const info, + void __iomem * const ioaddr); +#endif /* #ifndef _PRINT_H_ */ diff -r 3339dcc91b88 -r e842688ccc5e devices/ccat/update.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/devices/ccat/update.c Mon Oct 27 14:15:55 2014 +0100 @@ -0,0 +1,461 @@ +/** + Network Driver for Beckhoff CCAT communication controller + Copyright (C) 2014 Beckhoff Automation GmbH + Author: Patrick Bruenn + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +*/ + +#include +#include +#include +#include +#include +#include "compat.h" +#include "module.h" +#include "print.h" +#include "update.h" + +#define CCAT_DATA_IN_4 0x038 +#define CCAT_DATA_IN_N 0x7F0 +#define CCAT_DATA_OUT_4 0x030 +#define CCAT_DATA_BLOCK_SIZE (size_t)((CCAT_DATA_IN_N - CCAT_DATA_IN_4)/8) +#define CCAT_WRITE_BLOCK_SIZE 128 +#define CCAT_FLASH_SIZE (size_t)0xE0000 + +/** FUNCTION_NAME CMD, CLOCKS */ +#define CCAT_BULK_ERASE 0xE3, 8 +#define CCAT_GET_PROM_ID 0xD5, 40 +#define CCAT_READ_FLASH 0xC0, 32 +#define CCAT_READ_STATUS 0xA0, 16 +#define CCAT_WRITE_ENABLE 0x60, 8 +#define CCAT_WRITE_FLASH 0x40, 32 + +/* from http://graphics.stanford.edu/~seander/bithacks.html#ReverseByteWith32Bits */ +#define SWAP_BITS(B) \ + ((((B) * 0x0802LU & 0x22110LU) | ((B) * 0x8020LU & 0x88440LU)) * 0x10101LU >> 16) + +/** + * struct update_buffer - keep track of a CCAT FPGA update + * @update: pointer to a valid ccat_update object + * @data: buffer used for write operations + * @size: number of bytes written to the data buffer, if 0 on ccat_update_release() no data will be written to FPGA + */ +struct update_buffer { + struct ccat_update *update; + char data[CCAT_FLASH_SIZE]; + size_t size; +}; + +static void ccat_wait_status_cleared(void __iomem * const ioaddr); +static int ccat_read_flash(void __iomem * const ioaddr, char __user * buf, + uint32_t len, loff_t * off); +static void ccat_write_flash(const struct update_buffer *const buf); +static void ccat_update_cmd(void __iomem * const ioaddr, uint8_t cmd, + uint16_t clocks); +static void ccat_update_destroy(struct kref *ref); + +/** + * wait_until_busy_reset() - wait until the busy flag was reset + * @ioaddr: address of the CCAT Update function in PCI config space + */ +static inline void wait_until_busy_reset(void __iomem * const ioaddr) +{ + wmb(); + while (ioread8(ioaddr + 1)) { + schedule(); + } +} + +static int ccat_update_open(struct inode *const i, struct file *const f) +{ + struct ccat_update *update = + container_of(i->i_cdev, struct ccat_update, cdev); + struct update_buffer *buf; + kref_get(&update->refcount); + if (atomic_read(&update->refcount.refcount) > 2) { + kref_put(&update->refcount, ccat_update_destroy); + return -EBUSY; + } + + buf = kzalloc(sizeof(*buf), GFP_KERNEL); + if (!buf) { + kref_put(&update->refcount, ccat_update_destroy); + return -ENOMEM; + } + + buf->update = update; + f->private_data = buf; + return 0; +} + +static int ccat_update_release(struct inode *const i, struct file *const f) +{ + const struct update_buffer *const buf = f->private_data; + struct ccat_update *const update = buf->update; + if (buf->size > 0) { + ccat_update_cmd(update->ioaddr, CCAT_WRITE_ENABLE); + ccat_update_cmd(update->ioaddr, CCAT_BULK_ERASE); + ccat_wait_status_cleared(update->ioaddr); + ccat_write_flash(buf); + } + kfree(f->private_data); + kref_put(&update->refcount, ccat_update_destroy); + return 0; +} + +/** + * ccat_update_read() - Read CCAT configuration data from flash + * @f: file handle previously initialized with ccat_update_open() + * @buf: buffer in user space provided for our data + * @len: length of the user space buffer + * @off: current offset of our file operation + * + * Copies data from the CCAT FPGA's configuration flash to user space. + * Note that the size of the FPGA's firmware is not known exactly so it + * is very possible that the overall buffer ends with a lot of 0xff. + * + * Return: the number of bytes written, or 0 if EOF reached + */ +static ssize_t ccat_update_read(struct file *const f, char __user * buf, + size_t len, loff_t * off) +{ + struct update_buffer *update = f->private_data; + if (!buf || !off) { + return -EINVAL; + } + if (*off >= CCAT_FLASH_SIZE) { + return 0; + } + if (*off + len >= CCAT_FLASH_SIZE) { + len = CCAT_FLASH_SIZE - *off; + } + return ccat_read_flash(update->update->ioaddr, buf, len, off); +} + +/** + * ccat_update_write() - Write data to the CCAT FPGA's configuration flash + * @f: file handle previously initialized with ccat_update_open() + * @buf: buffer in user space providing the new configuration data (from *.rbf) + * @len: length of the user space buffer + * @off: current offset in the configuration data + * + * Copies data from user space (possibly a *.rbf) to the CCAT FPGA's + * configuration flash to user space. + * + * Return: the number of bytes written, or 0 if flash end is reached + */ + +static ssize_t ccat_update_write(struct file *const f, const char __user * buf, + size_t len, loff_t * off) +{ + struct update_buffer *const update = f->private_data; + if (*off + len > sizeof(update->data)) + return 0; + + if (copy_from_user(update->data + *off, buf, len)) { + return -EFAULT; + } + + *off += len; + update->size = *off; + return len; +} + +static struct file_operations update_ops = { + .owner = THIS_MODULE, + .open = ccat_update_open, + .release = ccat_update_release, + .read = ccat_update_read, + .write = ccat_update_write, +}; + +/** + * __ccat_update_cmd() - Helper to issue a FPGA flash command + * @ioaddr: address of the CCAT Update function in PCI config space + * @cmd: the command identifier + * @clocks: the number of clocks associated with the specified command + * + * no write memory barrier is called and the busy flag is not evaluated + */ +static inline void __ccat_update_cmd(void __iomem * const ioaddr, uint8_t cmd, + uint16_t clocks) +{ + iowrite8((0xff00 & clocks) >> 8, ioaddr); + iowrite8(0x00ff & clocks, ioaddr + 0x8); + iowrite8(cmd, ioaddr + 0x10); +} + +/** + * ccat_update_cmd() - Helper to issue a FPGA flash command + * @ioaddr: address of the CCAT Update function in PCI config space + * @cmd: the command identifier + * @clocks: the number of clocks associated with the specified command + * + * Triggers a full flash command cycle with write memory barrier and + * command activate. This call blocks until the busy flag is reset. + */ +static inline void ccat_update_cmd(void __iomem * const ioaddr, uint8_t cmd, + uint16_t clocks) +{ + __ccat_update_cmd(ioaddr, cmd, clocks); + wmb(); + iowrite8(0xff, ioaddr + 0x7f8); + wait_until_busy_reset(ioaddr); +} + +/** + * ccat_update_cmd_addr() - Helper to issue a FPGA flash command with address parameter + * @ioaddr: address of the CCAT Update function in PCI config space + * @cmd: the command identifier + * @clocks: the number of clocks associated with the specified command + * @addr: 24 bit address associated with the specified command + * + * Triggers a full flash command cycle with write memory barrier and + * command activate. This call blocks until the busy flag is reset. + */ +static inline void ccat_update_cmd_addr(void __iomem * const ioaddr, + uint8_t cmd, uint16_t clocks, + uint32_t addr) +{ + const uint8_t addr_0 = SWAP_BITS(addr & 0xff); + const uint8_t addr_1 = SWAP_BITS((addr & 0xff00) >> 8); + const uint8_t addr_2 = SWAP_BITS((addr & 0xff0000) >> 16); + __ccat_update_cmd(ioaddr, cmd, clocks); + iowrite8(addr_2, ioaddr + 0x18); + iowrite8(addr_1, ioaddr + 0x20); + iowrite8(addr_0, ioaddr + 0x28); + wmb(); + iowrite8(0xff, ioaddr + 0x7f8); + wait_until_busy_reset(ioaddr); +} + +/** + * ccat_get_prom_id() - Read CCAT PROM ID + * @ioaddr: address of the CCAT Update function in PCI config space + * + * Return: the CCAT FPGA's PROM identifier + */ +uint8_t ccat_get_prom_id(void __iomem * const ioaddr) +{ + ccat_update_cmd(ioaddr, CCAT_GET_PROM_ID); + return ioread8(ioaddr + 0x38); +} + +/** + * ccat_get_status() - Read CCAT Update status + * @ioaddr: address of the CCAT Update function in PCI config space + * + * Return: the current status of the CCAT Update function + */ +static uint8_t ccat_get_status(void __iomem * const ioaddr) +{ + ccat_update_cmd(ioaddr, CCAT_READ_STATUS); + return ioread8(ioaddr + 0x20); +} + +/** + * ccat_wait_status_cleared() - wait until CCAT status is cleared + * @ioaddr: address of the CCAT Update function in PCI config space + * + * Blocks until bit 7 of the CCAT Update status is reset + */ + +static void ccat_wait_status_cleared(void __iomem * const ioaddr) +{ + uint8_t status; + do { + status = ccat_get_status(ioaddr); + } while (status & (1 << 7)); +} + +/** + * ccat_read_flash_block() - Read a block of CCAT configuration data from flash + * @ioaddr: address of the CCAT Update function in PCI config space + * @addr: 24 bit address of the block to read + * @len: number of bytes to read from this block, len <= CCAT_DATA_BLOCK_SIZE + * @buf: output buffer in user space + * + * Copies one block of configuration data from the CCAT FPGA's flash to + * the user space buffer. + * Note that the size of the FPGA's firmware is not known exactly so it + * is very possible that the overall buffer ends with a lot of 0xff. + * + * Return: the number of bytes copied + */ +static int ccat_read_flash_block(void __iomem * const ioaddr, + const uint32_t addr, const uint16_t len, + char __user * const buf) +{ + uint16_t i; + const uint16_t clocks = 8 * len; + ccat_update_cmd_addr(ioaddr, CCAT_READ_FLASH + clocks, addr); + for (i = 0; i < len; i++) { + put_user(ioread8(ioaddr + CCAT_DATA_IN_4 + 8 * i), buf + i); + } + return len; +} + +/** + * ccat_read_flash() - Read a chunk of CCAT configuration data from flash + * @ioaddr: address of the CCAT Update function in PCI config space + * @buf: output buffer in user space + * @len: number of bytes to read + * @off: offset in the configuration data + * + * Copies multiple blocks of configuration data from the CCAT FPGA's + * flash to the user space buffer. + * + * Return: the number of bytes copied + */ +static int ccat_read_flash(void __iomem * const ioaddr, char __user * buf, + uint32_t len, loff_t * off) +{ + const loff_t start = *off; + while (len > CCAT_DATA_BLOCK_SIZE) { + *off += + ccat_read_flash_block(ioaddr, *off, CCAT_DATA_BLOCK_SIZE, + buf); + buf += CCAT_DATA_BLOCK_SIZE; + len -= CCAT_DATA_BLOCK_SIZE; + } + *off += ccat_read_flash_block(ioaddr, *off, len, buf); + return *off - start; +} + +/** + * ccat_write_flash_block() - Write a block of CCAT configuration data to flash + * @ioaddr: address of the CCAT Update function in PCI config space + * @addr: 24 bit start address in the CCAT FPGA's flash + * @len: number of bytes to write in this block, len <= CCAT_WRITE_BLOCK_SIZE + * @buf: input buffer + * + * Copies one block of configuration data to the CCAT FPGA's flash + * + * Return: the number of bytes copied + */ +static int ccat_write_flash_block(void __iomem * const ioaddr, + const uint32_t addr, const uint16_t len, + const char *const buf) +{ + const uint16_t clocks = 8 * len; + uint16_t i; + ccat_update_cmd(ioaddr, CCAT_WRITE_ENABLE); + for (i = 0; i < len; i++) { + iowrite8(buf[i], ioaddr + CCAT_DATA_OUT_4 + 8 * i); + } + ccat_update_cmd_addr(ioaddr, CCAT_WRITE_FLASH + clocks, addr); + ccat_wait_status_cleared(ioaddr); + return len; +} + +/** + * ccat_write_flash() - Write a new CCAT configuration to FPGA's flash + * @update: a CCAT Update buffer containing the new FPGA configuration + */ +static void ccat_write_flash(const struct update_buffer *const update) +{ + const char *buf = update->data; + uint32_t off = 0; + size_t len = update->size; + while (len > CCAT_WRITE_BLOCK_SIZE) { + ccat_write_flash_block(update->update->ioaddr, off, + (uint16_t) CCAT_WRITE_BLOCK_SIZE, buf); + off += CCAT_WRITE_BLOCK_SIZE; + buf += CCAT_WRITE_BLOCK_SIZE; + len -= CCAT_WRITE_BLOCK_SIZE; + } + ccat_write_flash_block(update->update->ioaddr, off, (uint16_t) len, + buf); +} + +/** + * ccat_update_init() - Initialize the CCAT Update function + */ +struct ccat_update *ccat_update_init(const struct ccat_device *const ccatdev, + void __iomem * const addr) +{ + struct ccat_update *const update = kzalloc(sizeof(*update), GFP_KERNEL); + if (!update) { + return NULL; + } + kref_init(&update->refcount); + update->ioaddr = ccatdev->bar[0].ioaddr + ioread32(addr + 0x8); + memcpy_fromio(&update->info, addr, sizeof(update->info)); + print_update_info(&update->info, update->ioaddr); + + if (0x00 != update->info.nRevision) { + pr_warn("CCAT Update rev. %d not supported\n", + update->info.nRevision); + goto cleanup; + } + + if (alloc_chrdev_region(&update->dev, 0, 1, DRV_NAME)) { + pr_warn("alloc_chrdev_region() failed\n"); + goto cleanup; + } + + update->class = class_create(THIS_MODULE, "ccat_update"); + if (NULL == update->class) { + pr_warn("Create device class failed\n"); + goto cleanup; + } + + if (NULL == + device_create(update->class, NULL, update->dev, NULL, + "ccat_update")) { + pr_warn("device_create() failed\n"); + goto cleanup; + } + + cdev_init(&update->cdev, &update_ops); + update->cdev.owner = THIS_MODULE; + update->cdev.ops = &update_ops; + if (cdev_add(&update->cdev, update->dev, 1)) { + pr_warn("add update device failed\n"); + goto cleanup; + } + return update; +cleanup: + kref_put(&update->refcount, ccat_update_destroy); + return NULL; +} + +/** + * ccat_update_destroy() - Cleanup the CCAT Update function + * @ref: pointer to a struct kref embedded into a struct ccat_update, which we intend to destroy + * + * Retrieves the parent struct ccat_update and destroys it. + */ +static void ccat_update_destroy(struct kref *ref) +{ + struct ccat_update *update = + container_of(ref, struct ccat_update, refcount); + cdev_del(&update->cdev); + device_destroy(update->class, update->dev); + class_destroy(update->class); + unregister_chrdev_region(update->dev, 1); + kfree(update); + pr_debug("%s(): done\n", __FUNCTION__); +} + +/** + * ccat_update_remove() - Prepare the CCAT Update function for removal + */ +void ccat_update_remove(struct ccat_update *update) +{ + kref_put(&update->refcount, ccat_update_destroy); + pr_debug("%s(): done\n", __FUNCTION__); +} diff -r 3339dcc91b88 -r e842688ccc5e devices/ccat/update.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/devices/ccat/update.h Mon Oct 27 14:15:55 2014 +0100 @@ -0,0 +1,27 @@ +/** + Network Driver for Beckhoff CCAT communication controller + Copyright (C) 2014 Beckhoff Automation GmbH + Author: Patrick Bruenn + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +*/ + +#ifndef _UPDATE_H_ +#define _UPDATE_H_ +extern uint8_t ccat_get_prom_id(void __iomem * const ioaddr); +extern struct ccat_update *ccat_update_init(const struct ccat_device *ccatdev, + void __iomem * addr); +extern void ccat_update_remove(struct ccat_update *update); +#endif /* #ifndef _UPDATE_H_ */ diff -r 3339dcc91b88 -r e842688ccc5e examples/user/main.c --- a/examples/user/main.c Mon Oct 27 13:41:01 2014 +0100 +++ b/examples/user/main.c Mon Oct 27 14:15:55 2014 +0100 @@ -44,11 +44,7 @@ // Application parameters #define FREQUENCY 100 -#define PRIORITY 1 - -// Optional features -#define CONFIGURE_PDOS 1 -#define SDO_ACCESS 0 +#define PRIORITY 0 /****************************************************************************/ @@ -71,107 +67,82 @@ // process data static uint8_t *domain1_pd = NULL; -#define BusCouplerPos 0, 0 -#define DigOutSlavePos 0, 2 -#define AnaInSlavePos 0, 3 -#define AnaOutSlavePos 0, 4 - -#define Beckhoff_EK1100 0x00000002, 0x044c2c52 +#define BusCouplerPos 0, 3 +#define DigOutSlavePos 0, 0 + +//#define Beckhoff_EK1100 0x00000002, 0x044c2c52 +#define Beckhoff_EK1100 0x00000002, 0x04562c52 +#define Beckhoff_EL1008 0x00000002, 0x03f03052 #define Beckhoff_EL2004 0x00000002, 0x07d43052 +#define Beckhoff_EL2008 0x00000002, 0x07d83052 #define Beckhoff_EL2032 0x00000002, 0x07f03052 #define Beckhoff_EL3152 0x00000002, 0x0c503052 #define Beckhoff_EL3102 0x00000002, 0x0c1e3052 #define Beckhoff_EL4102 0x00000002, 0x10063052 // offsets for PDO entries -static unsigned int off_ana_in_status; -static unsigned int off_ana_in_value; -static unsigned int off_ana_out; -static unsigned int off_dig_out; - -const static ec_pdo_entry_reg_t domain1_regs[] = { - {AnaInSlavePos, Beckhoff_EL3102, 0x3101, 1, &off_ana_in_status}, - {AnaInSlavePos, Beckhoff_EL3102, 0x3101, 2, &off_ana_in_value}, - {AnaOutSlavePos, Beckhoff_EL4102, 0x3001, 1, &off_ana_out}, - {DigOutSlavePos, Beckhoff_EL2032, 0x3001, 1, &off_dig_out}, - {} -}; - -static unsigned int counter = 0; -static unsigned int blink = 0; +static unsigned int off_dig_in[1]; +static unsigned int off_dig_out[2]; + /*****************************************************************************/ - -#if CONFIGURE_PDOS - -// Analog in -------------------------- - -static ec_pdo_entry_info_t el3102_pdo_entries[] = { - {0x3101, 1, 8}, // channel 1 status - {0x3101, 2, 16}, // channel 1 value - {0x3102, 1, 8}, // channel 2 status - {0x3102, 2, 16}, // channel 2 value - {0x6401, 1, 16}, // channel 1 value (alt.) - {0x6401, 2, 16} // channel 2 value (alt.) -}; - -static ec_pdo_info_t el3102_pdos[] = { - {0x1A00, 2, el3102_pdo_entries}, - {0x1A01, 2, el3102_pdo_entries + 2} -}; - -static ec_sync_info_t el3102_syncs[] = { +// Digital in ------------------------ +static ec_pdo_entry_info_t el1008_channels[] = { + {0x6000, 1, 1}, + {0x6010, 1, 1}, + {0x6020, 1, 1}, + {0x6030, 1, 1}, + {0x6040, 1, 1}, + {0x6050, 1, 1}, + {0x6060, 1, 1}, + {0x6070, 1, 1}, +}; + +static ec_pdo_info_t el1008_pdos[] = { + {0x1a00, 1, &el1008_channels[0]}, + {0x1a01, 1, &el1008_channels[1]}, + {0x1a02, 1, &el1008_channels[2]}, + {0x1a03, 1, &el1008_channels[3]}, + {0x1a04, 1, &el1008_channels[4]}, + {0x1a05, 1, &el1008_channels[5]}, + {0x1a06, 1, &el1008_channels[6]}, + {0x1a07, 1, &el1008_channels[7]} +}; + +static ec_sync_info_t el1008_syncs[] = { {2, EC_DIR_OUTPUT}, - {3, EC_DIR_INPUT, 2, el3102_pdos}, + {3, EC_DIR_INPUT, 8, el1008_pdos}, {0xff} }; -// Analog out ------------------------- - -static ec_pdo_entry_info_t el4102_pdo_entries[] = { - {0x3001, 1, 16}, // channel 1 value - {0x3002, 1, 16}, // channel 2 value -}; - -static ec_pdo_info_t el4102_pdos[] = { - {0x1600, 1, el4102_pdo_entries}, - {0x1601, 1, el4102_pdo_entries + 1} -}; - -static ec_sync_info_t el4102_syncs[] = { - {2, EC_DIR_OUTPUT, 2, el4102_pdos}, - {3, EC_DIR_INPUT}, - {0xff} -}; - // Digital out ------------------------ - -static ec_pdo_entry_info_t el2004_channels[] = { - {0x3001, 1, 1}, // Value 1 - {0x3001, 2, 1}, // Value 2 - {0x3001, 3, 1}, // Value 3 - {0x3001, 4, 1} // Value 4 -}; - -static ec_pdo_info_t el2004_pdos[] = { - {0x1600, 1, &el2004_channels[0]}, - {0x1601, 1, &el2004_channels[1]}, - {0x1602, 1, &el2004_channels[2]}, - {0x1603, 1, &el2004_channels[3]} -}; - -static ec_sync_info_t el2004_syncs[] = { - {0, EC_DIR_OUTPUT, 4, el2004_pdos}, +static ec_pdo_entry_info_t el2008_channels[] = { + {0x7000, 1, 1}, + {0x7010, 1, 1}, + {0x7020, 1, 1}, + {0x7030, 1, 1}, + {0x7040, 1, 1}, + {0x7050, 1, 1}, + {0x7060, 1, 1}, + {0x7070, 1, 1}, +}; + +static ec_pdo_info_t el2008_pdos[] = { + {0x1600, 1, &el2008_channels[0]}, + {0x1601, 1, &el2008_channels[1]}, + {0x1602, 1, &el2008_channels[2]}, + {0x1603, 1, &el2008_channels[3]}, + {0x1604, 1, &el2008_channels[4]}, + {0x1605, 1, &el2008_channels[5]}, + {0x1606, 1, &el2008_channels[6]}, + {0x1607, 1, &el2008_channels[7]} +}; + +static ec_sync_info_t el2008_syncs[] = { + {0, EC_DIR_OUTPUT, 8, el2008_pdos}, {1, EC_DIR_INPUT}, {0xff} }; -#endif - -/*****************************************************************************/ - -#if SDO_ACCESS -static ec_sdo_request_t *sdo; -#endif /*****************************************************************************/ @@ -226,74 +197,59 @@ sc_ana_in_state = s; } -/*****************************************************************************/ - -#if SDO_ACCESS -void read_sdo(void) -{ - switch (ecrt_sdo_request_state(sdo)) { - case EC_REQUEST_UNUSED: // request was not used yet - ecrt_sdo_request_read(sdo); // trigger first read - break; - case EC_REQUEST_BUSY: - fprintf(stderr, "Still busy...\n"); - break; - case EC_REQUEST_SUCCESS: - fprintf(stderr, "SDO value: 0x%04X\n", - EC_READ_U16(ecrt_sdo_request_data(sdo))); - ecrt_sdo_request_read(sdo); // trigger next read - break; - case EC_REQUEST_ERROR: - fprintf(stderr, "Failed to read SDO!\n"); - ecrt_sdo_request_read(sdo); // retry reading - break; - } -} -#endif - /****************************************************************************/ void cyclic_task() { + static unsigned int counter = 10; + static uint8_t outputValue = 0; + static int numAsyncCycles = 0; + uint8_t inputValue = 0; + static uint8_t error = 0; + // receive process data ecrt_master_receive(master); ecrt_domain_process(domain1); // check process data state (optional) check_domain1_state(); - + + + inputValue = EC_READ_U8(domain1_pd + off_dig_in[0]); + + if(inputValue != outputValue) { + numAsyncCycles++; + } else { + numAsyncCycles = 0; + } + + if(numAsyncCycles > 2) { + if(error != 0xff) { + error++; + } + } + + if (counter) { counter--; - } else { // do this at 1 Hz - counter = FREQUENCY; + } else { + counter = 5; //update delay + + // calculate new process data - blink = !blink; + outputValue++; // check for master state (optional) check_master_state(); // check for islave configuration state(s) (optional) check_slave_config_states(); - -#if SDO_ACCESS - // read process data SDO - read_sdo(); -#endif - - } - -#if 0 - // read process data - printf("AnaIn: state %u value %u\n", - EC_READ_U8(domain1_pd + off_ana_in_status), - EC_READ_U16(domain1_pd + off_ana_in_value)); -#endif - -#if 1 + } + // write process data - EC_WRITE_U8(domain1_pd + off_dig_out, blink ? 0x06 : 0x09); -#endif + EC_WRITE_U8(domain1_pd + off_dig_out[1], outputValue); + EC_WRITE_U8(domain1_pd + off_dig_out[0], error); // send process data ecrt_domain_queue(domain1); @@ -312,11 +268,31 @@ /****************************************************************************/ +int Init_EL2008(uint16_t position) +{ + ec_slave_config_t *sc; + if (!(sc = ecrt_master_slave_config(master, 0, position, Beckhoff_EL2008))) { + fprintf(stderr, "Failed to get EL2008 configuration #%u.\n", position); + return -1; + } + if (ecrt_slave_config_pdos(sc, EC_END, el2008_syncs)) { + fprintf(stderr, "Failed to configure PDOs #%u.\n", position); + return -1; + } + if (0 > (off_dig_out[position] = ecrt_slave_config_reg_pdo_entry(sc, 0x7000, 1, domain1, NULL))) { + fprintf(stderr, "Failed to configure reg PDOs #%u.\n", position); + return -1; + } + fprintf(stderr, "EL2008 #%u configured offset: %d.\n", position, off_dig_out[position]); + return 0; +} + int main(int argc, char **argv) { ec_slave_config_t *sc; struct sigaction sa; struct itimerval tv; + uint16_t i; master = ecrt_request_master(0); if (!master) @@ -326,60 +302,33 @@ if (!domain1) return -1; - if (!(sc_ana_in = ecrt_master_slave_config( - master, AnaInSlavePos, Beckhoff_EL3102))) { - fprintf(stderr, "Failed to get slave configuration.\n"); - return -1; - } - -#if SDO_ACCESS - fprintf(stderr, "Creating SDO requests...\n"); - if (!(sdo = ecrt_slave_config_create_sdo_request(sc_ana_in, 0x3102, 2, 2))) { - fprintf(stderr, "Failed to create SDO request.\n"); - return -1; - } - ecrt_sdo_request_timeout(sdo, 500); // ms -#endif - -#if CONFIGURE_PDOS printf("Configuring PDOs...\n"); - if (ecrt_slave_config_pdos(sc_ana_in, EC_END, el3102_syncs)) { + if (!(sc_ana_in = ecrt_master_slave_config(master, 0, 2, Beckhoff_EL1008))) { + fprintf(stderr, "Failed to get digital in configuration.\n"); + return -1; + } + if (ecrt_slave_config_pdos(sc_ana_in, EC_END, el1008_syncs)) { fprintf(stderr, "Failed to configure PDOs.\n"); return -1; } - - if (!(sc = ecrt_master_slave_config( - master, AnaOutSlavePos, Beckhoff_EL4102))) { - fprintf(stderr, "Failed to get slave configuration.\n"); - return -1; - } - - if (ecrt_slave_config_pdos(sc, EC_END, el4102_syncs)) { - fprintf(stderr, "Failed to configure PDOs.\n"); - return -1; - } - - if (!(sc = ecrt_master_slave_config( - master, DigOutSlavePos, Beckhoff_EL2032))) { - fprintf(stderr, "Failed to get slave configuration.\n"); - return -1; - } - - if (ecrt_slave_config_pdos(sc, EC_END, el2004_syncs)) { - fprintf(stderr, "Failed to configure PDOs.\n"); - return -1; - } -#endif + if (0 > (off_dig_in[0] = ecrt_slave_config_reg_pdo_entry(sc_ana_in, 0x6000, 1, domain1, NULL))) { + fprintf(stderr, "Failed to configure reg PDOs.\n"); + return -1; + } + printf("EL1008 configured.\n"); + + for(i = 0; i < 2; ++i) { + if(Init_EL2008(i)) { + fprintf(stderr, "Failed to initialize EL2008 #%u.\n", i); + return -1; + } + } // Create configuration for bus coupler sc = ecrt_master_slave_config(master, BusCouplerPos, Beckhoff_EK1100); if (!sc) return -1; - - if (ecrt_domain_reg_pdo_entry_list(domain1, domain1_regs)) { - fprintf(stderr, "PDO entry registration failed!\n"); - return -1; - } + fprintf(stderr, "EK1100 configured.\n"); printf("Activating master...\n"); if (ecrt_master_activate(master)) diff -r 3339dcc91b88 -r e842688ccc5e script/ethercat.conf --- a/script/ethercat.conf Mon Oct 27 13:41:01 2014 +0100 +++ b/script/ethercat.conf Mon Oct 27 14:15:55 2014 +0100 @@ -47,11 +47,11 @@ # the EtherCAT-capable ones. If a certain (EtherCAT-capable) driver is not # found, a warning will appear. # -# Possible values: 8139too, e100, e1000, e1000e, r8169, generic. Separate -# multiple drivers with spaces. +# Possible values: 8139too, e100, e1000, e1000e, r8169, generic, ccat. +# Separate multiple drivers with spaces. # -# Note: The e100, e1000, e1000e and r8169 drivers are not built by default. -# Enable them with the --enable- configure switches. +# Note: The e100, e1000, e1000e, r8169 and ccat drivers are not built by +# default. Enable them with the --enable- configure switches. # # Attention: When using the generic driver, the corresponding Ethernet device # has to be activated (with OS methods, for example 'ip link set ethX up'), diff -r 3339dcc91b88 -r e842688ccc5e script/ethercatctl.in --- a/script/ethercatctl.in Mon Oct 27 13:41:01 2014 +0100 +++ b/script/ethercatctl.in Mon Oct 27 14:15:55 2014 +0100 @@ -108,7 +108,7 @@ continue # ec_* module not found fi - if [ ${MODULE} != "generic" ]; then + if [ ${MODULE} != "generic" -a ${MODULE} != "ccat" ]; then # try to unload standard module if ${LSMOD} | grep "^${MODULE} " > /dev/null; then if ! ${RMMOD} ${MODULE}; then @@ -119,7 +119,7 @@ fi if ! ${MODPROBE} ${MODPROBE_FLAGS} ${ECMODULE}; then - if [ ${MODULE} != "generic" ]; then + if [ ${MODULE} != "generic" -a ${MODULE} != "ccat" ]; then ${MODPROBE} ${MODPROBE_FLAGS} ${MODULE} # try to restore fi ${RMMOD} ${LOADED_MODULES} @@ -150,7 +150,7 @@ # load standard modules again for MODULE in ${DEVICE_MODULES}; do - if [ ${MODULE} == "generic" ]; then + if [ ${MODULE} == "generic" -o ${MODULE} == "ccat" ]; then continue fi ${MODPROBE} ${MODPROBE_FLAGS} ${MODULE} diff -r 3339dcc91b88 -r e842688ccc5e script/sysconfig/ethercat --- a/script/sysconfig/ethercat Mon Oct 27 13:41:01 2014 +0100 +++ b/script/sysconfig/ethercat Mon Oct 27 14:15:55 2014 +0100 @@ -47,11 +47,11 @@ # the EtherCAT-capable ones. If a certain (EtherCAT-capable) driver is not # found, a warning will appear. # -# Possible values: 8139too, e100, e1000, e1000e, r8169, generic. Separate -# multiple drivers with spaces. +# Possible values: 8139too, e100, e1000, e1000e, r8169, generic, ccat. +# Separate multiple drivers with spaces. # -# Note: The e100, e1000, e1000e and r8169 drivers are not built by default. -# Enable them with the --enable- configure switches. +# Note: The e100, e1000, e1000e, r8169 and ccat drivers are not built by +# default. Enable them with the --enable- configure switches. # # Attention: When using the generic driver, the corresponding Ethernet device # has to be activated (with OS methods, for example 'ip link set ethX up'),