# HG changeset patch
# User Florian Pose <fp@igh-essen.com>
# Date 1236589805 0
# Node ID 0625902b390400119f2d6a8a374074cf950730f5
# Parent  61793d845ad6fda400f89cc49aeb378425aaa52b
Added 8139too driver for 2.6.27, thanks to M. Goetze.

diff -r 61793d845ad6 -r 0625902b3904 NEWS
--- a/NEWS	Mon Mar 09 09:08:09 2009 +0000
+++ b/NEWS	Mon Mar 09 09:10:05 2009 +0000
@@ -20,8 +20,10 @@
 * Improved error case return codes of many functions.
 * Added 8139too driver for 2.6.25.
 * Added 8139too driver for 2.6.26, thanks to M. Luescher.
+* Added 8139too driver for 2.6.27, thanks to M. Goetze.
 * Added e1000 driver for 2.6.26, thanks to M. Luescher.
-* Implemented the File Access over EtherCAT (FoE) mailbox protocol.
+* Implemented the File Access over EtherCAT (FoE) mailbox protocol, thanks to
+  O. Zarges.
 * Going to the Bootstrap state is now supported by the state machines and the
   command-line tool.
 * Introduced ecrt_master_slave() to get information about a certain slave.
diff -r 61793d845ad6 -r 0625902b3904 devices/8139too-2.6.27-ethercat.c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/8139too-2.6.27-ethercat.c	Mon Mar 09 09:10:05 2009 +0000
@@ -0,0 +1,2770 @@
+/******************************************************************************
+ *
+ *  $Id$
+ *
+ *  Copyright (C) 2006-2009  Florian Pose, Ingenieurgemeinschaft IgH
+ *
+ *  This file is part of the IgH EtherCAT Master.
+ *
+ *  The IgH EtherCAT Master is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License version 2, as
+ *  published by the Free Software Foundation.
+ *
+ *  The IgH EtherCAT Master is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General
+ *  Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with the IgH EtherCAT Master; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ *  ---
+ *
+ *  The license mentioned above concerns the source code only. Using the
+ *  EtherCAT technology and brand is only permitted in compliance with the
+ *  industrial property and similar rights of Beckhoff Automation GmbH.
+ *
+ *****************************************************************************/
+
+/**
+   \file
+   EtherCAT driver for RTL8139-compatible NICs.
+*/
+
+/*****************************************************************************/
+
+/*
+  Former documentation:
+
+	8139too.c: A RealTek RTL-8139 Fast Ethernet driver for Linux.
+
+	Maintained by Jeff Garzik <jgarzik@pobox.com>
+	Copyright 2000-2002 Jeff Garzik
+
+	Much code comes from Donald Becker's rtl8139.c driver,
+	versions 1.13 and older.  This driver was originally based
+	on rtl8139.c version 1.07.  Header of rtl8139.c version 1.13:
+
+	-----<snip>-----
+
+        	Written 1997-2001 by Donald Becker.
+		This software may be used and distributed according to the
+		terms of the GNU General Public License (GPL), incorporated
+		herein by reference.  Drivers based on or derived from this
+		code fall under the GPL and must retain the authorship,
+		copyright and license notice.  This file is not a complete
+		program and may only be used when the entire operating
+		system is licensed under the GPL.
+
+		This driver is for boards based on the RTL8129 and RTL8139
+		PCI ethernet chips.
+
+		The author may be reached as becker@scyld.com, or C/O Scyld
+		Computing Corporation 410 Severn Ave., Suite 210 Annapolis
+		MD 21403
+
+		Support and updates available at
+		http://www.scyld.com/network/rtl8139.html
+
+		Twister-tuning table provided by Kinston
+		<shangh@realtek.com.tw>.
+
+	-----<snip>-----
+
+	This software may be used and distributed according to the terms
+	of the GNU General Public License, incorporated herein by reference.
+
+	Contributors:
+
+		Donald Becker - he wrote the original driver, kudos to him!
+		(but please don't e-mail him for support, this isn't his driver)
+
+		Tigran Aivazian - bug fixes, skbuff free cleanup
+
+		Martin Mares - suggestions for PCI cleanup
+
+		David S. Miller - PCI DMA and softnet updates
+
+		Ernst Gill - fixes ported from BSD driver
+
+		Daniel Kobras - identified specific locations of
+			posted MMIO write bugginess
+
+		Gerard Sharp - bug fix, testing and feedback
+
+		David Ford - Rx ring wrap fix
+
+		Dan DeMaggio - swapped RTL8139 cards with me, and allowed me
+		to find and fix a crucial bug on older chipsets.
+
+		Donald Becker/Chris Butterworth/Marcus Westergren -
+		Noticed various Rx packet size-related buglets.
+
+		Santiago Garcia Mantinan - testing and feedback
+
+		Jens David - 2.2.x kernel backports
+
+		Martin Dennett - incredibly helpful insight on undocumented
+		features of the 8139 chips
+
+		Jean-Jacques Michel - bug fix
+
+		Tobias Ringström - Rx interrupt status checking suggestion
+
+		Andrew Morton - Clear blocked signals, avoid
+		buffer overrun setting current->comm.
+
+		Kalle Olavi Niemitalo - Wake-on-LAN ioctls
+
+		Robert Kuebel - Save kernel thread from dying on any signal.
+
+	Submitting bug reports:
+
+		"rtl8139-diag -mmmaaavvveefN" output
+		enable RTL8139_DEBUG below, and look at 'dmesg' or kernel log
+
+*/
+
+#define DRV_NAME	"ec_8139too"
+#define DRV_VERSION	"0.9.28"
+
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/rtnetlink.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/completion.h>
+#include <linux/crc32.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <asm/irq.h>
+
+#include "../globals.h"
+#include "ecdev.h"
+
+#define RTL8139_DRIVER_NAME DRV_NAME \
+                            " EtherCAT-capable Fast Ethernet driver " \
+                            DRV_VERSION ", master " EC_MASTER_VERSION
+
+#define PFX DRV_NAME ": "
+
+/* Default Message level */
+#define RTL8139_DEF_MSG_ENABLE   (NETIF_MSG_DRV   | \
+                                 NETIF_MSG_PROBE  | \
+                                 NETIF_MSG_LINK)
+
+
+/* define to 1, 2 or 3 to enable copious debugging info */
+#define RTL8139_DEBUG 0
+
+/* define to 1 to disable lightweight runtime debugging checks */
+#undef RTL8139_NDEBUG
+
+
+#if RTL8139_DEBUG
+/* note: prints function name for you */
+#  define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __func__ , ## args)
+#else
+#  define DPRINTK(fmt, args...)
+#endif
+
+#ifdef RTL8139_NDEBUG
+#  define assert(expr) do {} while (0)
+#else
+#  define assert(expr) \
+        if(unlikely(!(expr))) {				        \
+        printk(KERN_ERR "Assertion failed! %s,%s,%s,line=%d\n",	\
+	#expr, __FILE__, __func__, __LINE__);			\
+        }
+#endif
+
+
+/* A few user-configurable values. */
+/* media options */
+#define MAX_UNITS 8
+static int media[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
+static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
+
+/* Whether to use MMIO or PIO. Default to MMIO. */
+#ifdef CONFIG_8139TOO_PIO
+static int use_io = 1;
+#else
+static int use_io = 0;
+#endif
+
+/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
+   The RTL chips use a 64 element hash table based on the Ethernet CRC.  */
+static int multicast_filter_limit = 32;
+
+/* bitmapped message enable number */
+static int debug = -1;
+
+/*
+ * Receive ring size
+ * Warning: 64K ring has hardware issues and may lock up.
+ */
+#if defined(CONFIG_SH_DREAMCAST)
+#define RX_BUF_IDX 0	/* 8K ring */
+#else
+#define RX_BUF_IDX	2	/* 32K ring */
+#endif
+#define RX_BUF_LEN	(8192 << RX_BUF_IDX)
+#define RX_BUF_PAD	16
+#define RX_BUF_WRAP_PAD 2048 /* spare padding to handle lack of packet wrap */
+
+#if RX_BUF_LEN == 65536
+#define RX_BUF_TOT_LEN	RX_BUF_LEN
+#else
+#define RX_BUF_TOT_LEN	(RX_BUF_LEN + RX_BUF_PAD + RX_BUF_WRAP_PAD)
+#endif
+
+/* Number of Tx descriptor registers. */
+#define NUM_TX_DESC	4
+
+/* max supported ethernet frame size -- must be at least (dev->mtu+14+4).*/
+#define MAX_ETH_FRAME_SIZE	1536
+
+/* Size of the Tx bounce buffers -- must be at least (dev->mtu+14+4). */
+#define TX_BUF_SIZE	MAX_ETH_FRAME_SIZE
+#define TX_BUF_TOT_LEN	(TX_BUF_SIZE * NUM_TX_DESC)
+
+/* PCI Tuning Parameters
+   Threshold is bytes transferred to chip before transmission starts. */
+#define TX_FIFO_THRESH 256	/* In bytes, rounded down to 32 byte units. */
+
+/* The following settings are log_2(bytes)-4:  0 == 16 bytes .. 6==1024, 7==end of packet. */
+#define RX_FIFO_THRESH	7	/* Rx buffer level before first PCI xfer.  */
+#define RX_DMA_BURST	7	/* Maximum PCI burst, '6' is 1024 */
+#define TX_DMA_BURST	6	/* Maximum PCI burst, '6' is 1024 */
+#define TX_RETRY	8	/* 0-15.  retries = 16 + (TX_RETRY * 16) */
+
+/* Operational parameters that usually are not changed. */
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT  (6*HZ)
+
+
+enum {
+	HAS_MII_XCVR = 0x010000,
+	HAS_CHIP_XCVR = 0x020000,
+	HAS_LNK_CHNG = 0x040000,
+};
+
+#define RTL_NUM_STATS 4		/* number of ETHTOOL_GSTATS u64's */
+#define RTL_REGS_VER 1		/* version of reg. data in ETHTOOL_GREGS */
+#define RTL_MIN_IO_SIZE 0x80
+#define RTL8139B_IO_SIZE 256
+
+#define RTL8129_CAPS	HAS_MII_XCVR
+#define RTL8139_CAPS	(HAS_CHIP_XCVR|HAS_LNK_CHNG)
+
+typedef enum {
+	RTL8139 = 0,
+	RTL8129,
+} board_t;
+
+
+/* indexed by board_t, above */
+static const struct {
+	const char *name;
+	u32 hw_flags;
+} board_info[] __devinitdata = {
+	{ "RealTek RTL8139", RTL8139_CAPS },
+	{ "RealTek RTL8129", RTL8129_CAPS },
+};
+
+
+static struct pci_device_id rtl8139_pci_tbl[] = {
+	{0x10ec, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x10ec, 0x8138, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x1500, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x4033, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x1186, 0x1300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x1186, 0x1340, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x13d1, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x1259, 0xa117, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x1259, 0xa11e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x14ea, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x14ea, 0xab07, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x11db, 0x1234, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x1432, 0x9130, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x02ac, 0x1012, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x018a, 0x0106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x126c, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x1743, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x021b, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+
+#ifdef CONFIG_SH_SECUREEDGE5410
+	/* Bogus 8139 silicon reports 8129 without external PROM :-( */
+	{0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+#endif
+#ifdef CONFIG_8139TOO_8129
+	{0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8129 },
+#endif
+
+	/* some crazy cards report invalid vendor ids like
+	 * 0x0001 here.  The other ids are valid and constant,
+	 * so we simply don't match on the main vendor id.
+	 */
+	{PCI_ANY_ID, 0x8139, 0x10ec, 0x8139, 0, 0, RTL8139 },
+	{PCI_ANY_ID, 0x8139, 0x1186, 0x1300, 0, 0, RTL8139 },
+	{PCI_ANY_ID, 0x8139, 0x13d1, 0xab06, 0, 0, RTL8139 },
+
+	{0,}
+};
+
+/* prevent driver from being loaded automatically */
+//MODULE_DEVICE_TABLE (pci, rtl8139_pci_tbl);
+
+static struct {
+	const char str[ETH_GSTRING_LEN];
+} ethtool_stats_keys[] = {
+	{ "early_rx" },
+	{ "tx_buf_mapped" },
+	{ "tx_timeouts" },
+	{ "rx_lost_in_ring" },
+};
+
+/* The rest of these values should never change. */
+
+/* Symbolic offsets to registers. */
+enum RTL8139_registers {
+	MAC0		= 0,	 /* Ethernet hardware address. */
+	MAR0		= 8,	 /* Multicast filter. */
+	TxStatus0	= 0x10,	 /* Transmit status (Four 32bit registers). */
+	TxAddr0		= 0x20,	 /* Tx descriptors (also four 32bit). */
+	RxBuf		= 0x30,
+	ChipCmd		= 0x37,
+	RxBufPtr	= 0x38,
+	RxBufAddr	= 0x3A,
+	IntrMask	= 0x3C,
+	IntrStatus	= 0x3E,
+	TxConfig	= 0x40,
+	RxConfig	= 0x44,
+	Timer		= 0x48,	 /* A general-purpose counter. */
+	RxMissed	= 0x4C,  /* 24 bits valid, write clears. */
+	Cfg9346		= 0x50,
+	Config0		= 0x51,
+	Config1		= 0x52,
+	FlashReg	= 0x54,
+	MediaStatus	= 0x58,
+	Config3		= 0x59,
+	Config4		= 0x5A,	 /* absent on RTL-8139A */
+	HltClk		= 0x5B,
+	MultiIntr	= 0x5C,
+	TxSummary	= 0x60,
+	BasicModeCtrl	= 0x62,
+	BasicModeStatus	= 0x64,
+	NWayAdvert	= 0x66,
+	NWayLPAR	= 0x68,
+	NWayExpansion	= 0x6A,
+	/* Undocumented registers, but required for proper operation. */
+	FIFOTMS		= 0x70,	 /* FIFO Control and test. */
+	CSCR		= 0x74,	 /* Chip Status and Configuration Register. */
+	PARA78		= 0x78,
+	PARA7c		= 0x7c,	 /* Magic transceiver parameter register. */
+	Config5		= 0xD8,	 /* absent on RTL-8139A */
+};
+
+enum ClearBitMasks {
+	MultiIntrClear	= 0xF000,
+	ChipCmdClear	= 0xE2,
+	Config1Clear	= (1<<7)|(1<<6)|(1<<3)|(1<<2)|(1<<1),
+};
+
+enum ChipCmdBits {
+	CmdReset	= 0x10,
+	CmdRxEnb	= 0x08,
+	CmdTxEnb	= 0x04,
+	RxBufEmpty	= 0x01,
+};
+
+/* Interrupt register bits, using my own meaningful names. */
+enum IntrStatusBits {
+	PCIErr		= 0x8000,
+	PCSTimeout	= 0x4000,
+	RxFIFOOver	= 0x40,
+	RxUnderrun	= 0x20,
+	RxOverflow	= 0x10,
+	TxErr		= 0x08,
+	TxOK		= 0x04,
+	RxErr		= 0x02,
+	RxOK		= 0x01,
+
+	RxAckBits	= RxFIFOOver | RxOverflow | RxOK,
+};
+
+enum TxStatusBits {
+	TxHostOwns	= 0x2000,
+	TxUnderrun	= 0x4000,
+	TxStatOK	= 0x8000,
+	TxOutOfWindow	= 0x20000000,
+	TxAborted	= 0x40000000,
+	TxCarrierLost	= 0x80000000,
+};
+enum RxStatusBits {
+	RxMulticast	= 0x8000,
+	RxPhysical	= 0x4000,
+	RxBroadcast	= 0x2000,
+	RxBadSymbol	= 0x0020,
+	RxRunt		= 0x0010,
+	RxTooLong	= 0x0008,
+	RxCRCErr	= 0x0004,
+	RxBadAlign	= 0x0002,
+	RxStatusOK	= 0x0001,
+};
+
+/* Bits in RxConfig. */
+enum rx_mode_bits {
+	AcceptErr	= 0x20,
+	AcceptRunt	= 0x10,
+	AcceptBroadcast	= 0x08,
+	AcceptMulticast	= 0x04,
+	AcceptMyPhys	= 0x02,
+	AcceptAllPhys	= 0x01,
+};
+
+/* Bits in TxConfig. */
+enum tx_config_bits {
+        /* Interframe Gap Time. Only TxIFG96 doesn't violate IEEE 802.3 */
+        TxIFGShift	= 24,
+        TxIFG84		= (0 << TxIFGShift), /* 8.4us / 840ns (10 / 100Mbps) */
+        TxIFG88		= (1 << TxIFGShift), /* 8.8us / 880ns (10 / 100Mbps) */
+        TxIFG92		= (2 << TxIFGShift), /* 9.2us / 920ns (10 / 100Mbps) */
+        TxIFG96		= (3 << TxIFGShift), /* 9.6us / 960ns (10 / 100Mbps) */
+
+	TxLoopBack	= (1 << 18) | (1 << 17), /* enable loopback test mode */
+	TxCRC		= (1 << 16),	/* DISABLE Tx pkt CRC append */
+	TxClearAbt	= (1 << 0),	/* Clear abort (WO) */
+	TxDMAShift	= 8, /* DMA burst value (0-7) is shifted X many bits */
+	TxRetryShift	= 4, /* TXRR value (0-15) is shifted X many bits */
+
+	TxVersionMask	= 0x7C800000, /* mask out version bits 30-26, 23 */
+};
+
+/* Bits in Config1 */
+enum Config1Bits {
+	Cfg1_PM_Enable	= 0x01,
+	Cfg1_VPD_Enable	= 0x02,
+	Cfg1_PIO	= 0x04,
+	Cfg1_MMIO	= 0x08,
+	LWAKE		= 0x10,		/* not on 8139, 8139A */
+	Cfg1_Driver_Load = 0x20,
+	Cfg1_LED0	= 0x40,
+	Cfg1_LED1	= 0x80,
+	SLEEP		= (1 << 1),	/* only on 8139, 8139A */
+	PWRDN		= (1 << 0),	/* only on 8139, 8139A */
+};
+
+/* Bits in Config3 */
+enum Config3Bits {
+	Cfg3_FBtBEn   	= (1 << 0), /* 1	= Fast Back to Back */
+	Cfg3_FuncRegEn	= (1 << 1), /* 1	= enable CardBus Function registers */
+	Cfg3_CLKRUN_En	= (1 << 2), /* 1	= enable CLKRUN */
+	Cfg3_CardB_En 	= (1 << 3), /* 1	= enable CardBus registers */
+	Cfg3_LinkUp   	= (1 << 4), /* 1	= wake up on link up */
+	Cfg3_Magic    	= (1 << 5), /* 1	= wake up on Magic Packet (tm) */
+	Cfg3_PARM_En  	= (1 << 6), /* 0	= software can set twister parameters */
+	Cfg3_GNTSel   	= (1 << 7), /* 1	= delay 1 clock from PCI GNT signal */
+};
+
+/* Bits in Config4 */
+enum Config4Bits {
+	LWPTN	= (1 << 2),	/* not on 8139, 8139A */
+};
+
+/* Bits in Config5 */
+enum Config5Bits {
+	Cfg5_PME_STS   	= (1 << 0), /* 1	= PCI reset resets PME_Status */
+	Cfg5_LANWake   	= (1 << 1), /* 1	= enable LANWake signal */
+	Cfg5_LDPS      	= (1 << 2), /* 0	= save power when link is down */
+	Cfg5_FIFOAddrPtr= (1 << 3), /* Realtek internal SRAM testing */
+	Cfg5_UWF        = (1 << 4), /* 1 = accept unicast wakeup frame */
+	Cfg5_MWF        = (1 << 5), /* 1 = accept multicast wakeup frame */
+	Cfg5_BWF        = (1 << 6), /* 1 = accept broadcast wakeup frame */
+};
+
+enum RxConfigBits {
+	/* rx fifo threshold */
+	RxCfgFIFOShift	= 13,
+	RxCfgFIFONone	= (7 << RxCfgFIFOShift),
+
+	/* Max DMA burst */
+	RxCfgDMAShift	= 8,
+	RxCfgDMAUnlimited = (7 << RxCfgDMAShift),
+
+	/* rx ring buffer length */
+	RxCfgRcv8K	= 0,
+	RxCfgRcv16K	= (1 << 11),
+	RxCfgRcv32K	= (1 << 12),
+	RxCfgRcv64K	= (1 << 11) | (1 << 12),
+
+	/* Disable packet wrap at end of Rx buffer. (not possible with 64k) */
+	RxNoWrap	= (1 << 7),
+};
+
+/* Twister tuning parameters from RealTek.
+   Completely undocumented, but required to tune bad links on some boards. */
+enum CSCRBits {
+	CSCR_LinkOKBit		= 0x0400,
+	CSCR_LinkChangeBit	= 0x0800,
+	CSCR_LinkStatusBits	= 0x0f000,
+	CSCR_LinkDownOffCmd	= 0x003c0,
+	CSCR_LinkDownCmd	= 0x0f3c0,
+};
+
+enum Cfg9346Bits {
+	Cfg9346_Lock	= 0x00,
+	Cfg9346_Unlock	= 0xC0,
+};
+
+typedef enum {
+	CH_8139	= 0,
+	CH_8139_K,
+	CH_8139A,
+	CH_8139A_G,
+	CH_8139B,
+	CH_8130,
+	CH_8139C,
+	CH_8100,
+	CH_8100B_8139D,
+	CH_8101,
+} chip_t;
+
+enum chip_flags {
+	HasHltClk	= (1 << 0),
+	HasLWake	= (1 << 1),
+};
+
+#define HW_REVID(b30, b29, b28, b27, b26, b23, b22) \
+	(b30<<30 | b29<<29 | b28<<28 | b27<<27 | b26<<26 | b23<<23 | b22<<22)
+#define HW_REVID_MASK	HW_REVID(1, 1, 1, 1, 1, 1, 1)
+
+/* directly indexed by chip_t, above */
+static const struct {
+	const char *name;
+	u32 version; /* from RTL8139C/RTL8139D docs */
+	u32 flags;
+} rtl_chip_info[] = {
+	{ "RTL-8139",
+	  HW_REVID(1, 0, 0, 0, 0, 0, 0),
+	  HasHltClk,
+	},
+
+	{ "RTL-8139 rev K",
+	  HW_REVID(1, 1, 0, 0, 0, 0, 0),
+	  HasHltClk,
+	},
+
+	{ "RTL-8139A",
+	  HW_REVID(1, 1, 1, 0, 0, 0, 0),
+	  HasHltClk, /* XXX undocumented? */
+	},
+
+	{ "RTL-8139A rev G",
+	  HW_REVID(1, 1, 1, 0, 0, 1, 0),
+	  HasHltClk, /* XXX undocumented? */
+	},
+
+	{ "RTL-8139B",
+	  HW_REVID(1, 1, 1, 1, 0, 0, 0),
+	  HasLWake,
+	},
+
+	{ "RTL-8130",
+	  HW_REVID(1, 1, 1, 1, 1, 0, 0),
+	  HasLWake,
+	},
+
+	{ "RTL-8139C",
+	  HW_REVID(1, 1, 1, 0, 1, 0, 0),
+	  HasLWake,
+	},
+
+	{ "RTL-8100",
+	  HW_REVID(1, 1, 1, 1, 0, 1, 0),
+ 	  HasLWake,
+ 	},
+
+	{ "RTL-8100B/8139D",
+	  HW_REVID(1, 1, 1, 0, 1, 0, 1),
+	  HasHltClk /* XXX undocumented? */
+	| HasLWake,
+	},
+
+	{ "RTL-8101",
+	  HW_REVID(1, 1, 1, 0, 1, 1, 1),
+	  HasLWake,
+	},
+};
+
+struct rtl_extra_stats {
+	unsigned long early_rx;
+	unsigned long tx_buf_mapped;
+	unsigned long tx_timeouts;
+	unsigned long rx_lost_in_ring;
+};
+
+struct rtl8139_private {
+	void __iomem		*mmio_addr;
+	int			drv_flags;
+	struct pci_dev		*pci_dev;
+	u32			msg_enable;
+	struct napi_struct	napi;
+	struct net_device	*dev;
+
+	unsigned char		*rx_ring;
+	unsigned int		cur_rx;	/* RX buf index of next pkt */
+	dma_addr_t		rx_ring_dma;
+
+	unsigned int		tx_flag;
+	unsigned long		cur_tx;
+	unsigned long		dirty_tx;
+	unsigned char		*tx_buf[NUM_TX_DESC];	/* Tx bounce buffers */
+	unsigned char		*tx_bufs;	/* Tx bounce buffer region. */
+	dma_addr_t		tx_bufs_dma;
+
+	signed char		phys[4];	/* MII device addresses. */
+
+				/* Twister tune state. */
+	char			twistie, twist_row, twist_col;
+
+	unsigned int		watchdog_fired : 1;
+	unsigned int		default_port : 4; /* Last dev->if_port value. */
+	unsigned int		have_thread : 1;
+
+	spinlock_t		lock;
+	spinlock_t		rx_lock;
+
+	chip_t			chipset;
+	u32			rx_config;
+	struct rtl_extra_stats	xstats;
+
+	struct delayed_work	thread;
+
+	struct mii_if_info	mii;
+	unsigned int		regs_len;
+	unsigned long		fifo_copy_timeout;
+    
+	ec_device_t *ecdev;
+};
+
+MODULE_AUTHOR("Florian Pose <fp@igh-essen.com>");
+MODULE_DESCRIPTION("RealTek RTL-8139 EtherCAT driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(EC_MASTER_VERSION);
+
+module_param(use_io, int, 0);
+MODULE_PARM_DESC(use_io, "Force use of I/O access mode. 0=MMIO 1=PIO");
+module_param(multicast_filter_limit, int, 0);
+module_param_array(media, int, NULL, 0);
+module_param_array(full_duplex, int, NULL, 0);
+module_param(debug, int, 0);
+MODULE_PARM_DESC (debug, "8139too bitmapped message enable number");
+MODULE_PARM_DESC (multicast_filter_limit, "8139too maximum number of filtered multicast addresses");
+MODULE_PARM_DESC (media, "8139too: Bits 4+9: force full duplex, bit 5: 100Mbps");
+MODULE_PARM_DESC (full_duplex, "8139too: Force full duplex for board(s) (1)");
+
+void ec_poll(struct net_device *);
+
+static int read_eeprom (void __iomem *ioaddr, int location, int addr_len);
+static int rtl8139_open (struct net_device *dev);
+static int mdio_read (struct net_device *dev, int phy_id, int location);
+static void mdio_write (struct net_device *dev, int phy_id, int location,
+			int val);
+static void rtl8139_start_thread(struct rtl8139_private *tp);
+static void rtl8139_tx_timeout (struct net_device *dev);
+static void rtl8139_init_ring (struct net_device *dev);
+static int rtl8139_start_xmit (struct sk_buff *skb,
+			       struct net_device *dev);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void rtl8139_poll_controller(struct net_device *dev);
+#endif
+static int rtl8139_poll(struct napi_struct *napi, int budget);
+static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance);
+static int rtl8139_close (struct net_device *dev);
+static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd);
+static struct net_device_stats *rtl8139_get_stats (struct net_device *dev);
+static void rtl8139_set_rx_mode (struct net_device *dev);
+static void __set_rx_mode (struct net_device *dev);
+static void rtl8139_hw_start (struct net_device *dev);
+static void rtl8139_thread (struct work_struct *work);
+static void rtl8139_tx_timeout_task(struct work_struct *work);
+static const struct ethtool_ops rtl8139_ethtool_ops;
+
+/* write MMIO register, with flush */
+/* Flush avoids rtl8139 bug w/ posted MMIO writes */
+#define RTL_W8_F(reg, val8)	do { iowrite8 ((val8), ioaddr + (reg)); ioread8 (ioaddr + (reg)); } while (0)
+#define RTL_W16_F(reg, val16)	do { iowrite16 ((val16), ioaddr + (reg)); ioread16 (ioaddr + (reg)); } while (0)
+#define RTL_W32_F(reg, val32)	do { iowrite32 ((val32), ioaddr + (reg)); ioread32 (ioaddr + (reg)); } while (0)
+
+/* write MMIO register */
+#define RTL_W8(reg, val8)	iowrite8 ((val8), ioaddr + (reg))
+#define RTL_W16(reg, val16)	iowrite16 ((val16), ioaddr + (reg))
+#define RTL_W32(reg, val32)	iowrite32 ((val32), ioaddr + (reg))
+
+/* read MMIO register */
+#define RTL_R8(reg)		ioread8 (ioaddr + (reg))
+#define RTL_R16(reg)		ioread16 (ioaddr + (reg))
+#define RTL_R32(reg)		((unsigned long) ioread32 (ioaddr + (reg)))
+
+
+static const u16 rtl8139_intr_mask =
+	PCIErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver |
+	TxErr | TxOK | RxErr | RxOK;
+
+static const u16 rtl8139_norx_intr_mask =
+	PCIErr | PCSTimeout | RxUnderrun |
+	TxErr | TxOK | RxErr ;
+
+#if RX_BUF_IDX == 0
+static const unsigned int rtl8139_rx_config =
+	RxCfgRcv8K | RxNoWrap |
+	(RX_FIFO_THRESH << RxCfgFIFOShift) |
+	(RX_DMA_BURST << RxCfgDMAShift);
+#elif RX_BUF_IDX == 1
+static const unsigned int rtl8139_rx_config =
+	RxCfgRcv16K | RxNoWrap |
+	(RX_FIFO_THRESH << RxCfgFIFOShift) |
+	(RX_DMA_BURST << RxCfgDMAShift);
+#elif RX_BUF_IDX == 2
+static const unsigned int rtl8139_rx_config =
+	RxCfgRcv32K | RxNoWrap |
+	(RX_FIFO_THRESH << RxCfgFIFOShift) |
+	(RX_DMA_BURST << RxCfgDMAShift);
+#elif RX_BUF_IDX == 3
+static const unsigned int rtl8139_rx_config =
+	RxCfgRcv64K |
+	(RX_FIFO_THRESH << RxCfgFIFOShift) |
+	(RX_DMA_BURST << RxCfgDMAShift);
+#else
+#error "Invalid configuration for 8139_RXBUF_IDX"
+#endif
+
+static const unsigned int rtl8139_tx_config =
+	TxIFG96 | (TX_DMA_BURST << TxDMAShift) | (TX_RETRY << TxRetryShift);
+
+static void __rtl8139_cleanup_dev (struct net_device *dev)
+{
+	struct rtl8139_private *tp = netdev_priv(dev);
+	struct pci_dev *pdev;
+
+	assert (dev != NULL);
+	assert (tp->pci_dev != NULL);
+	pdev = tp->pci_dev;
+
+	if (tp->mmio_addr)
+		pci_iounmap (pdev, tp->mmio_addr);
+
+	/* it's ok to call this even if we have no regions to free */
+	pci_release_regions (pdev);
+
+	free_netdev(dev);
+	pci_set_drvdata (pdev, NULL);
+}
+
+
+static void rtl8139_chip_reset (void __iomem *ioaddr)
+{
+	int i;
+
+	/* Soft reset the chip. */
+	RTL_W8 (ChipCmd, CmdReset);
+
+	/* Check that the chip has finished the reset. */
+	for (i = 1000; i > 0; i--) {
+		barrier();
+		if ((RTL_R8 (ChipCmd) & CmdReset) == 0)
+			break;
+		udelay (10);
+	}
+}
+
+
+static int __devinit rtl8139_init_board (struct pci_dev *pdev,
+					 struct net_device **dev_out)
+{
+	void __iomem *ioaddr;
+	struct net_device *dev;
+	struct rtl8139_private *tp;
+	u8 tmp8;
+	int rc, disable_dev_on_err = 0;
+	unsigned int i;
+	unsigned long pio_start, pio_end, pio_flags, pio_len;
+	unsigned long mmio_start, mmio_end, mmio_flags, mmio_len;
+	u32 version;
+
+	assert (pdev != NULL);
+
+	*dev_out = NULL;
+
+	/* dev and priv zeroed in alloc_etherdev */
+	dev = alloc_etherdev (sizeof (*tp));
+	if (dev == NULL) {
+		dev_err(&pdev->dev, "Unable to alloc new net device\n");
+		return -ENOMEM;
+	}
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	tp = netdev_priv(dev);
+	tp->pci_dev = pdev;
+
+	/* enable device (incl. PCI PM wakeup and hotplug setup) */
+	rc = pci_enable_device (pdev);
+	if (rc)
+		goto err_out;
+
+	pio_start = pci_resource_start (pdev, 0);
+	pio_end = pci_resource_end (pdev, 0);
+	pio_flags = pci_resource_flags (pdev, 0);
+	pio_len = pci_resource_len (pdev, 0);
+
+	mmio_start = pci_resource_start (pdev, 1);
+	mmio_end = pci_resource_end (pdev, 1);
+	mmio_flags = pci_resource_flags (pdev, 1);
+	mmio_len = pci_resource_len (pdev, 1);
+
+	/* set this immediately, we need to know before
+	 * we talk to the chip directly */
+	DPRINTK("PIO region size == 0x%02X\n", pio_len);
+	DPRINTK("MMIO region size == 0x%02lX\n", mmio_len);
+
+retry:
+	if (use_io) {
+		/* make sure PCI base addr 0 is PIO */
+		if (!(pio_flags & IORESOURCE_IO)) {
+			dev_err(&pdev->dev, "region #0 not a PIO resource, aborting\n");
+			rc = -ENODEV;
+			goto err_out;
+		}
+		/* check for weird/broken PCI region reporting */
+		if (pio_len < RTL_MIN_IO_SIZE) {
+			dev_err(&pdev->dev, "Invalid PCI I/O region size(s), aborting\n");
+			rc = -ENODEV;
+			goto err_out;
+		}
+	} else {
+		/* make sure PCI base addr 1 is MMIO */
+		if (!(mmio_flags & IORESOURCE_MEM)) {
+			dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n");
+			rc = -ENODEV;
+			goto err_out;
+		}
+		if (mmio_len < RTL_MIN_IO_SIZE) {
+			dev_err(&pdev->dev, "Invalid PCI mem region size(s), aborting\n");
+			rc = -ENODEV;
+			goto err_out;
+		}
+	}
+
+	rc = pci_request_regions (pdev, DRV_NAME);
+	if (rc)
+		goto err_out;
+	disable_dev_on_err = 1;
+
+	/* enable PCI bus-mastering */
+	pci_set_master (pdev);
+
+	if (use_io) {
+		ioaddr = pci_iomap(pdev, 0, 0);
+		if (!ioaddr) {
+			dev_err(&pdev->dev, "cannot map PIO, aborting\n");
+			rc = -EIO;
+			goto err_out;
+		}
+		dev->base_addr = pio_start;
+		tp->regs_len = pio_len;
+	} else {
+		/* ioremap MMIO region */
+		ioaddr = pci_iomap(pdev, 1, 0);
+		if (ioaddr == NULL) {
+			dev_err(&pdev->dev, "cannot remap MMIO, trying PIO\n");
+			pci_release_regions(pdev);
+			use_io = 1;
+			goto retry;
+		}
+		dev->base_addr = (long) ioaddr;
+		tp->regs_len = mmio_len;
+	}
+	tp->mmio_addr = ioaddr;
+
+	/* Bring old chips out of low-power mode. */
+	RTL_W8 (HltClk, 'R');
+
+	/* check for missing/broken hardware */
+	if (RTL_R32 (TxConfig) == 0xFFFFFFFF) {
+		dev_err(&pdev->dev, "Chip not responding, ignoring board\n");
+		rc = -EIO;
+		goto err_out;
+	}
+
+	/* identify chip attached to board */
+	version = RTL_R32 (TxConfig) & HW_REVID_MASK;
+	for (i = 0; i < ARRAY_SIZE (rtl_chip_info); i++)
+		if (version == rtl_chip_info[i].version) {
+			tp->chipset = i;
+			goto match;
+		}
+
+	/* if unknown chip, assume array element #0, original RTL-8139 in this case */
+	dev_printk (KERN_DEBUG, &pdev->dev,
+		    "unknown chip version, assuming RTL-8139\n");
+	dev_printk (KERN_DEBUG, &pdev->dev,
+		    "TxConfig = 0x%lx\n", RTL_R32 (TxConfig));
+	tp->chipset = 0;
+
+match:
+	DPRINTK ("chipset id (%d) == index %d, '%s'\n",
+		 version, i, rtl_chip_info[i].name);
+
+	if (tp->chipset >= CH_8139B) {
+		u8 new_tmp8 = tmp8 = RTL_R8 (Config1);
+		DPRINTK("PCI PM wakeup\n");
+		if ((rtl_chip_info[tp->chipset].flags & HasLWake) &&
+		    (tmp8 & LWAKE))
+			new_tmp8 &= ~LWAKE;
+		new_tmp8 |= Cfg1_PM_Enable;
+		if (new_tmp8 != tmp8) {
+			RTL_W8 (Cfg9346, Cfg9346_Unlock);
+			RTL_W8 (Config1, tmp8);
+			RTL_W8 (Cfg9346, Cfg9346_Lock);
+		}
+		if (rtl_chip_info[tp->chipset].flags & HasLWake) {
+			tmp8 = RTL_R8 (Config4);
+			if (tmp8 & LWPTN) {
+				RTL_W8 (Cfg9346, Cfg9346_Unlock);
+				RTL_W8 (Config4, tmp8 & ~LWPTN);
+				RTL_W8 (Cfg9346, Cfg9346_Lock);
+			}
+		}
+	} else {
+		DPRINTK("Old chip wakeup\n");
+		tmp8 = RTL_R8 (Config1);
+		tmp8 &= ~(SLEEP | PWRDN);
+		RTL_W8 (Config1, tmp8);
+	}
+
+	rtl8139_chip_reset (ioaddr);
+
+	*dev_out = dev;
+	return 0;
+
+err_out:
+	__rtl8139_cleanup_dev (dev);
+	if (disable_dev_on_err)
+		pci_disable_device (pdev);
+	return rc;
+}
+
+
+static int __devinit rtl8139_init_one (struct pci_dev *pdev,
+				       const struct pci_device_id *ent)
+{
+	struct net_device *dev = NULL;
+	struct rtl8139_private *tp;
+	int i, addr_len, option;
+	void __iomem *ioaddr;
+	static int board_idx = -1;
+	DECLARE_MAC_BUF(mac);
+
+	assert (pdev != NULL);
+	assert (ent != NULL);
+
+	board_idx++;
+
+	/* when we're built into the kernel, the driver version message
+	 * is only printed if at least one 8139 board has been found
+	 */
+#ifndef MODULE
+	{
+		static int printed_version;
+		if (!printed_version++)
+			printk (KERN_INFO RTL8139_DRIVER_NAME "\n");
+	}
+#endif
+
+	if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
+	    pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pdev->revision >= 0x20) {
+		dev_info(&pdev->dev,
+			   "This (id %04x:%04x rev %02x) is an enhanced 8139C+ chip\n",
+		       	   pdev->vendor, pdev->device, pdev->revision);
+		dev_info(&pdev->dev,
+			   "Use the \"8139cp\" driver for improved performance and stability.\n");
+	}
+
+	if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
+	    pdev->device == PCI_DEVICE_ID_REALTEK_8139 &&
+	    pdev->subsystem_vendor == PCI_VENDOR_ID_ATHEROS &&
+	    pdev->subsystem_device == PCI_DEVICE_ID_REALTEK_8139) {
+		printk(KERN_INFO "8139too: OQO Model 2 detected. Forcing PIO\n");
+		use_io = 1;
+	}
+
+	i = rtl8139_init_board (pdev, &dev);
+	if (i < 0)
+		return i;
+
+	assert (dev != NULL);
+	tp = netdev_priv(dev);
+	tp->dev = dev;
+
+	ioaddr = tp->mmio_addr;
+	assert (ioaddr != NULL);
+
+	addr_len = read_eeprom (ioaddr, 0, 8) == 0x8129 ? 8 : 6;
+	for (i = 0; i < 3; i++)
+		((__le16 *) (dev->dev_addr))[i] =
+		    cpu_to_le16(read_eeprom (ioaddr, i + 7, addr_len));
+	memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
+
+	/* The Rtl8139-specific entries in the device structure. */
+	dev->open = rtl8139_open;
+	dev->hard_start_xmit = rtl8139_start_xmit;
+	netif_napi_add(dev, &tp->napi, rtl8139_poll, 64);
+	dev->stop = rtl8139_close;
+	dev->get_stats = rtl8139_get_stats;
+	dev->set_multicast_list = rtl8139_set_rx_mode;
+	dev->do_ioctl = netdev_ioctl;
+	dev->ethtool_ops = &rtl8139_ethtool_ops;
+	dev->tx_timeout = rtl8139_tx_timeout;
+	dev->watchdog_timeo = TX_TIMEOUT;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	dev->poll_controller = rtl8139_poll_controller;
+#endif
+
+	/* note: the hardware is not capable of sg/csum/highdma, however
+	 * through the use of skb_copy_and_csum_dev we enable these
+	 * features
+	 */
+	dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA;
+
+	dev->irq = pdev->irq;
+
+	/* tp zeroed and aligned in alloc_etherdev */
+	tp = netdev_priv(dev);
+
+	/* note: tp->chipset set in rtl8139_init_board */
+	tp->drv_flags = board_info[ent->driver_data].hw_flags;
+	tp->mmio_addr = ioaddr;
+	tp->msg_enable =
+		(debug < 0 ? RTL8139_DEF_MSG_ENABLE : ((1 << debug) - 1));
+	spin_lock_init (&tp->lock);
+	spin_lock_init (&tp->rx_lock);
+	INIT_DELAYED_WORK(&tp->thread, rtl8139_thread);
+	tp->mii.dev = dev;
+	tp->mii.mdio_read = mdio_read;
+	tp->mii.mdio_write = mdio_write;
+	tp->mii.phy_id_mask = 0x3f;
+	tp->mii.reg_num_mask = 0x1f;
+
+	/* dev is fully set up and ready to use now */
+    
+	// offer device to EtherCAT master module
+	tp->ecdev = ecdev_offer(dev, ec_poll, THIS_MODULE);
+
+	if (!tp->ecdev) {
+		DPRINTK("about to register device named %s (%p)...\n", dev->name, dev);
+		i = register_netdev (dev);
+		if (i) goto err_out;
+	}
+
+	pci_set_drvdata (pdev, dev);
+
+	printk (KERN_INFO "%s: %s at 0x%lx, "
+		"%s, IRQ %d\n",
+		dev->name,
+		board_info[ent->driver_data].name,
+		dev->base_addr,
+		print_mac(mac, dev->dev_addr),
+		dev->irq);
+
+	printk (KERN_DEBUG "%s:  Identified 8139 chip type '%s'\n",
+		dev->name, rtl_chip_info[tp->chipset].name);
+
+	/* Find the connected MII xcvrs.
+	   Doing this in open() would allow detecting external xcvrs later, but
+	   takes too much time. */
+#ifdef CONFIG_8139TOO_8129
+	if (tp->drv_flags & HAS_MII_XCVR) {
+		int phy, phy_idx = 0;
+		for (phy = 0; phy < 32 && phy_idx < sizeof(tp->phys); phy++) {
+			int mii_status = mdio_read(dev, phy, 1);
+			if (mii_status != 0xffff  &&  mii_status != 0x0000) {
+				u16 advertising = mdio_read(dev, phy, 4);
+				tp->phys[phy_idx++] = phy;
+				printk(KERN_INFO "%s: MII transceiver %d status 0x%4.4x "
+					   "advertising %4.4x.\n",
+					   dev->name, phy, mii_status, advertising);
+			}
+		}
+		if (phy_idx == 0) {
+			printk(KERN_INFO "%s: No MII transceivers found!  Assuming SYM "
+				   "transceiver.\n",
+				   dev->name);
+			tp->phys[0] = 32;
+		}
+	} else
+#endif
+		tp->phys[0] = 32;
+	tp->mii.phy_id = tp->phys[0];
+
+	/* The lower four bits are the media type. */
+	option = (board_idx >= MAX_UNITS) ? 0 : media[board_idx];
+	if (option > 0) {
+		tp->mii.full_duplex = (option & 0x210) ? 1 : 0;
+		tp->default_port = option & 0xFF;
+		if (tp->default_port)
+			tp->mii.force_media = 1;
+	}
+	if (board_idx < MAX_UNITS  &&  full_duplex[board_idx] > 0)
+		tp->mii.full_duplex = full_duplex[board_idx];
+	if (tp->mii.full_duplex) {
+		printk(KERN_INFO "%s: Media type forced to Full Duplex.\n", dev->name);
+		/* Changing the MII-advertised media because might prevent
+		   re-connection. */
+		tp->mii.force_media = 1;
+	}
+	if (tp->default_port) {
+		printk(KERN_INFO "  Forcing %dMbps %s-duplex operation.\n",
+			   (option & 0x20 ? 100 : 10),
+			   (option & 0x10 ? "full" : "half"));
+		mdio_write(dev, tp->phys[0], 0,
+				   ((option & 0x20) ? 0x2000 : 0) | 	/* 100Mbps? */
+				   ((option & 0x10) ? 0x0100 : 0)); /* Full duplex? */
+	}
+
+	/* Put the chip into low-power mode. */
+	if (rtl_chip_info[tp->chipset].flags & HasHltClk)
+		RTL_W8 (HltClk, 'H');	/* 'R' would leave the clock running. */
+
+	if (tp->ecdev && ecdev_open(tp->ecdev)) {
+		ecdev_withdraw(tp->ecdev);
+		goto err_out;
+	}
+
+	return 0;
+
+err_out:
+	__rtl8139_cleanup_dev (dev);
+	pci_disable_device (pdev);
+	return i;
+}
+
+
+static void __devexit rtl8139_remove_one (struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata (pdev);
+	struct rtl8139_private *tp = netdev_priv(dev);
+
+	assert (dev != NULL);
+
+	flush_scheduled_work();
+
+	if (tp->ecdev) {
+		ecdev_close(tp->ecdev);
+		ecdev_withdraw(tp->ecdev);
+	}
+	else {
+		unregister_netdev (dev);
+	}
+
+	__rtl8139_cleanup_dev (dev);
+	pci_disable_device (pdev);
+}
+
+
+/* Serial EEPROM section. */
+
+/*  EEPROM_Ctrl bits. */
+#define EE_SHIFT_CLK	0x04	/* EEPROM shift clock. */
+#define EE_CS			0x08	/* EEPROM chip select. */
+#define EE_DATA_WRITE	0x02	/* EEPROM chip data in. */
+#define EE_WRITE_0		0x00
+#define EE_WRITE_1		0x02
+#define EE_DATA_READ	0x01	/* EEPROM chip data out. */
+#define EE_ENB			(0x80 | EE_CS)
+
+/* Delay between EEPROM clock transitions.
+   No extra delay is needed with 33Mhz PCI, but 66Mhz may change this.
+ */
+
+#define eeprom_delay()	(void)RTL_R32(Cfg9346)
+
+/* The EEPROM commands include the alway-set leading bit. */
+#define EE_WRITE_CMD	(5)
+#define EE_READ_CMD		(6)
+#define EE_ERASE_CMD	(7)
+
+static int __devinit read_eeprom (void __iomem *ioaddr, int location, int addr_len)
+{
+	int i;
+	unsigned retval = 0;
+	int read_cmd = location | (EE_READ_CMD << addr_len);
+
+	RTL_W8 (Cfg9346, EE_ENB & ~EE_CS);
+	RTL_W8 (Cfg9346, EE_ENB);
+	eeprom_delay ();
+
+	/* Shift the read command bits out. */
+	for (i = 4 + addr_len; i >= 0; i--) {
+		int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
+		RTL_W8 (Cfg9346, EE_ENB | dataval);
+		eeprom_delay ();
+		RTL_W8 (Cfg9346, EE_ENB | dataval | EE_SHIFT_CLK);
+		eeprom_delay ();
+	}
+	RTL_W8 (Cfg9346, EE_ENB);
+	eeprom_delay ();
+
+	for (i = 16; i > 0; i--) {
+		RTL_W8 (Cfg9346, EE_ENB | EE_SHIFT_CLK);
+		eeprom_delay ();
+		retval =
+		    (retval << 1) | ((RTL_R8 (Cfg9346) & EE_DATA_READ) ? 1 :
+				     0);
+		RTL_W8 (Cfg9346, EE_ENB);
+		eeprom_delay ();
+	}
+
+	/* Terminate the EEPROM access. */
+	RTL_W8 (Cfg9346, ~EE_CS);
+	eeprom_delay ();
+
+	return retval;
+}
+
+/* MII serial management: mostly bogus for now. */
+/* Read and write the MII management registers using software-generated
+   serial MDIO protocol.
+   The maximum data clock rate is 2.5 Mhz.  The minimum timing is usually
+   met by back-to-back PCI I/O cycles, but we insert a delay to avoid
+   "overclocking" issues. */
+#define MDIO_DIR		0x80
+#define MDIO_DATA_OUT	0x04
+#define MDIO_DATA_IN	0x02
+#define MDIO_CLK		0x01
+#define MDIO_WRITE0 (MDIO_DIR)
+#define MDIO_WRITE1 (MDIO_DIR | MDIO_DATA_OUT)
+
+#define mdio_delay()	RTL_R8(Config4)
+
+
+static const char mii_2_8139_map[8] = {
+	BasicModeCtrl,
+	BasicModeStatus,
+	0,
+	0,
+	NWayAdvert,
+	NWayLPAR,
+	NWayExpansion,
+	0
+};
+
+
+#ifdef CONFIG_8139TOO_8129
+/* Syncronize the MII management interface by shifting 32 one bits out. */
+static void mdio_sync (void __iomem *ioaddr)
+{
+	int i;
+
+	for (i = 32; i >= 0; i--) {
+		RTL_W8 (Config4, MDIO_WRITE1);
+		mdio_delay ();
+		RTL_W8 (Config4, MDIO_WRITE1 | MDIO_CLK);
+		mdio_delay ();
+	}
+}
+#endif
+
+static int mdio_read (struct net_device *dev, int phy_id, int location)
+{
+	struct rtl8139_private *tp = netdev_priv(dev);
+	int retval = 0;
+#ifdef CONFIG_8139TOO_8129
+	void __iomem *ioaddr = tp->mmio_addr;
+	int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location;
+	int i;
+#endif
+
+	if (phy_id > 31) {	/* Really a 8139.  Use internal registers. */
+		void __iomem *ioaddr = tp->mmio_addr;
+		return location < 8 && mii_2_8139_map[location] ?
+		    RTL_R16 (mii_2_8139_map[location]) : 0;
+	}
+
+#ifdef CONFIG_8139TOO_8129
+	mdio_sync (ioaddr);
+	/* Shift the read command bits out. */
+	for (i = 15; i >= 0; i--) {
+		int dataval = (mii_cmd & (1 << i)) ? MDIO_DATA_OUT : 0;
+
+		RTL_W8 (Config4, MDIO_DIR | dataval);
+		mdio_delay ();
+		RTL_W8 (Config4, MDIO_DIR | dataval | MDIO_CLK);
+		mdio_delay ();
+	}
+
+	/* Read the two transition, 16 data, and wire-idle bits. */
+	for (i = 19; i > 0; i--) {
+		RTL_W8 (Config4, 0);
+		mdio_delay ();
+		retval = (retval << 1) | ((RTL_R8 (Config4) & MDIO_DATA_IN) ? 1 : 0);
+		RTL_W8 (Config4, MDIO_CLK);
+		mdio_delay ();
+	}
+#endif
+
+	return (retval >> 1) & 0xffff;
+}
+
+
+static void mdio_write (struct net_device *dev, int phy_id, int location,
+			int value)
+{
+	struct rtl8139_private *tp = netdev_priv(dev);
+#ifdef CONFIG_8139TOO_8129
+	void __iomem *ioaddr = tp->mmio_addr;
+	int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location << 18) | value;
+	int i;
+#endif
+
+	if (phy_id > 31) {	/* Really a 8139.  Use internal registers. */
+		void __iomem *ioaddr = tp->mmio_addr;
+		if (location == 0) {
+			RTL_W8 (Cfg9346, Cfg9346_Unlock);
+			RTL_W16 (BasicModeCtrl, value);
+			RTL_W8 (Cfg9346, Cfg9346_Lock);
+		} else if (location < 8 && mii_2_8139_map[location])
+			RTL_W16 (mii_2_8139_map[location], value);
+		return;
+	}
+
+#ifdef CONFIG_8139TOO_8129
+	mdio_sync (ioaddr);
+
+	/* Shift the command bits out. */
+	for (i = 31; i >= 0; i--) {
+		int dataval =
+		    (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
+		RTL_W8 (Config4, dataval);
+		mdio_delay ();
+		RTL_W8 (Config4, dataval | MDIO_CLK);
+		mdio_delay ();
+	}
+	/* Clear out extra bits. */
+	for (i = 2; i > 0; i--) {
+		RTL_W8 (Config4, 0);
+		mdio_delay ();
+		RTL_W8 (Config4, MDIO_CLK);
+		mdio_delay ();
+	}
+#endif
+}
+
+
+static int rtl8139_open (struct net_device *dev)
+{
+	struct rtl8139_private *tp = netdev_priv(dev);
+	int retval;
+	void __iomem *ioaddr = tp->mmio_addr;
+
+	if (!tp->ecdev) {
+		retval = request_irq(dev->irq, rtl8139_interrupt,
+			IRQF_SHARED, dev->name, dev);
+		if (retval)
+			return retval;
+	}
+
+	tp->tx_bufs = dma_alloc_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
+					   &tp->tx_bufs_dma, GFP_KERNEL);
+	tp->rx_ring = dma_alloc_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
+					   &tp->rx_ring_dma, GFP_KERNEL);
+	if (tp->tx_bufs == NULL || tp->rx_ring == NULL) {
+		if (!tp->ecdev) free_irq(dev->irq, dev);
+
+		if (tp->tx_bufs)
+			dma_free_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
+					    tp->tx_bufs, tp->tx_bufs_dma);
+		if (tp->rx_ring)
+			dma_free_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
+					    tp->rx_ring, tp->rx_ring_dma);
+
+		return -ENOMEM;
+
+	}
+
+	napi_enable(&tp->napi);
+
+	tp->mii.full_duplex = tp->mii.force_media;
+	tp->tx_flag = (TX_FIFO_THRESH << 11) & 0x003f0000;
+
+	rtl8139_init_ring (dev);
+	rtl8139_hw_start (dev);
+
+	if (!tp->ecdev) {
+		netif_start_queue (dev);
+
+		if (netif_msg_ifup(tp))
+			printk(KERN_DEBUG "%s: rtl8139_open() ioaddr %#llx IRQ %d"
+					" GP Pins %2.2x %s-duplex.\n", dev->name,
+					(unsigned long long)pci_resource_start (tp->pci_dev, 1),
+					dev->irq, RTL_R8 (MediaStatus),
+					tp->mii.full_duplex ? "full" : "half");
+		rtl8139_start_thread(tp);
+	}
+
+	return 0;
+}
+
+
+static void rtl_check_media (struct net_device *dev, unsigned int init_media)
+{
+	struct rtl8139_private *tp = netdev_priv(dev);
+
+	if (tp->ecdev) {
+		void __iomem *ioaddr = tp->mmio_addr;
+		u16 state = RTL_R16(BasicModeStatus) & BMSR_LSTATUS;
+		ecdev_set_link(tp->ecdev, state ? 1 : 0);
+	}
+	else {
+		if (tp->phys[0] >= 0) {
+			mii_check_media(&tp->mii, netif_msg_link(tp), init_media);
+		}
+	}
+}
+
+/* Start the hardware at open or resume. */
+static void rtl8139_hw_start (struct net_device *dev)
+{
+	struct rtl8139_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	u32 i;
+	u8 tmp;
+
+	/* Bring old chips out of low-power mode. */
+	if (rtl_chip_info[tp->chipset].flags & HasHltClk)
+		RTL_W8 (HltClk, 'R');
+
+	rtl8139_chip_reset (ioaddr);
+
+	/* unlock Config[01234] and BMCR register writes */
+	RTL_W8_F (Cfg9346, Cfg9346_Unlock);
+	/* Restore our idea of the MAC address. */
+	RTL_W32_F (MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0)));
+	RTL_W32_F (MAC0 + 4, le16_to_cpu (*(__le16 *) (dev->dev_addr + 4)));
+
+	/* Must enable Tx/Rx before setting transfer thresholds! */
+	RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
+
+	tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys;
+	RTL_W32 (RxConfig, tp->rx_config);
+	RTL_W32 (TxConfig, rtl8139_tx_config);
+
+	tp->cur_rx = 0;
+
+	rtl_check_media (dev, 1);
+
+	if (tp->chipset >= CH_8139B) {
+		/* Disable magic packet scanning, which is enabled
+		 * when PM is enabled in Config1.  It can be reenabled
+		 * via ETHTOOL_SWOL if desired.  */
+		RTL_W8 (Config3, RTL_R8 (Config3) & ~Cfg3_Magic);
+	}
+
+	DPRINTK("init buffer addresses\n");
+
+	/* Lock Config[01234] and BMCR register writes */
+	RTL_W8 (Cfg9346, Cfg9346_Lock);
+
+	/* init Rx ring buffer DMA address */
+	RTL_W32_F (RxBuf, tp->rx_ring_dma);
+
+	/* init Tx buffer DMA addresses */
+	for (i = 0; i < NUM_TX_DESC; i++)
+		RTL_W32_F (TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs));
+
+	RTL_W32 (RxMissed, 0);
+
+	rtl8139_set_rx_mode (dev);
+
+	/* no early-rx interrupts */
+	RTL_W16 (MultiIntr, RTL_R16 (MultiIntr) & MultiIntrClear);
+
+	/* make sure RxTx has started */
+	tmp = RTL_R8 (ChipCmd);
+	if ((!(tmp & CmdRxEnb)) || (!(tmp & CmdTxEnb)))
+		RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
+
+	if (!tp->ecdev)
+		/* Enable all known interrupts by setting the interrupt mask. */
+		RTL_W16 (IntrMask, rtl8139_intr_mask);
+}
+
+
+/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
+static void rtl8139_init_ring (struct net_device *dev)
+{
+	struct rtl8139_private *tp = netdev_priv(dev);
+	int i;
+
+	tp->cur_rx = 0;
+	tp->cur_tx = 0;
+	tp->dirty_tx = 0;
+
+	for (i = 0; i < NUM_TX_DESC; i++)
+		tp->tx_buf[i] = &tp->tx_bufs[i * TX_BUF_SIZE];
+}
+
+
+/* This must be global for CONFIG_8139TOO_TUNE_TWISTER case */
+static int next_tick = 3 * HZ;
+
+#ifndef CONFIG_8139TOO_TUNE_TWISTER
+static inline void rtl8139_tune_twister (struct net_device *dev,
+				  struct rtl8139_private *tp) {}
+#else
+enum TwisterParamVals {
+	PARA78_default	= 0x78fa8388,
+	PARA7c_default	= 0xcb38de43,	/* param[0][3] */
+	PARA7c_xxx	= 0xcb38de43,
+};
+
+static const unsigned long param[4][4] = {
+	{0xcb39de43, 0xcb39ce43, 0xfb38de03, 0xcb38de43},
+	{0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
+	{0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
+	{0xbb39de43, 0xbb39ce43, 0xbb39ce83, 0xbb39ce83}
+};
+
+static void rtl8139_tune_twister (struct net_device *dev,
+				  struct rtl8139_private *tp)
+{
+	int linkcase;
+	void __iomem *ioaddr = tp->mmio_addr;
+
+	/* This is a complicated state machine to configure the "twister" for
+	   impedance/echos based on the cable length.
+	   All of this is magic and undocumented.
+	 */
+	switch (tp->twistie) {
+	case 1:
+		if (RTL_R16 (CSCR) & CSCR_LinkOKBit) {
+			/* We have link beat, let us tune the twister. */
+			RTL_W16 (CSCR, CSCR_LinkDownOffCmd);
+			tp->twistie = 2;	/* Change to state 2. */
+			next_tick = HZ / 10;
+		} else {
+			/* Just put in some reasonable defaults for when beat returns. */
+			RTL_W16 (CSCR, CSCR_LinkDownCmd);
+			RTL_W32 (FIFOTMS, 0x20);	/* Turn on cable test mode. */
+			RTL_W32 (PARA78, PARA78_default);
+			RTL_W32 (PARA7c, PARA7c_default);
+			tp->twistie = 0;	/* Bail from future actions. */
+		}
+		break;
+	case 2:
+		/* Read how long it took to hear the echo. */
+		linkcase = RTL_R16 (CSCR) & CSCR_LinkStatusBits;
+		if (linkcase == 0x7000)
+			tp->twist_row = 3;
+		else if (linkcase == 0x3000)
+			tp->twist_row = 2;
+		else if (linkcase == 0x1000)
+			tp->twist_row = 1;
+		else
+			tp->twist_row = 0;
+		tp->twist_col = 0;
+		tp->twistie = 3;	/* Change to state 2. */
+		next_tick = HZ / 10;
+		break;
+	case 3:
+		/* Put out four tuning parameters, one per 100msec. */
+		if (tp->twist_col == 0)
+			RTL_W16 (FIFOTMS, 0);
+		RTL_W32 (PARA7c, param[(int) tp->twist_row]
+			 [(int) tp->twist_col]);
+		next_tick = HZ / 10;
+		if (++tp->twist_col >= 4) {
+			/* For short cables we are done.
+			   For long cables (row == 3) check for mistune. */
+			tp->twistie =
+			    (tp->twist_row == 3) ? 4 : 0;
+		}
+		break;
+	case 4:
+		/* Special case for long cables: check for mistune. */
+		if ((RTL_R16 (CSCR) &
+		     CSCR_LinkStatusBits) == 0x7000) {
+			tp->twistie = 0;
+			break;
+		} else {
+			RTL_W32 (PARA7c, 0xfb38de03);
+			tp->twistie = 5;
+			next_tick = HZ / 10;
+		}
+		break;
+	case 5:
+		/* Retune for shorter cable (column 2). */
+		RTL_W32 (FIFOTMS, 0x20);
+		RTL_W32 (PARA78, PARA78_default);
+		RTL_W32 (PARA7c, PARA7c_default);
+		RTL_W32 (FIFOTMS, 0x00);
+		tp->twist_row = 2;
+		tp->twist_col = 0;
+		tp->twistie = 3;
+		next_tick = HZ / 10;
+		break;
+
+	default:
+		/* do nothing */
+		break;
+	}
+}
+#endif /* CONFIG_8139TOO_TUNE_TWISTER */
+
+static inline void rtl8139_thread_iter (struct net_device *dev,
+				 struct rtl8139_private *tp,
+				 void __iomem *ioaddr)
+{
+	int mii_lpa;
+
+	mii_lpa = mdio_read (dev, tp->phys[0], MII_LPA);
+
+	if (!tp->mii.force_media && mii_lpa != 0xffff) {
+		int duplex = (mii_lpa & LPA_100FULL)
+		    || (mii_lpa & 0x01C0) == 0x0040;
+		if (tp->mii.full_duplex != duplex) {
+			tp->mii.full_duplex = duplex;
+
+			if (mii_lpa) {
+				printk (KERN_INFO
+					"%s: Setting %s-duplex based on MII #%d link"
+					" partner ability of %4.4x.\n",
+					dev->name,
+					tp->mii.full_duplex ? "full" : "half",
+					tp->phys[0], mii_lpa);
+			} else {
+				printk(KERN_INFO"%s: media is unconnected, link down, or incompatible connection\n",
+				       dev->name);
+			}
+#if 0
+			RTL_W8 (Cfg9346, Cfg9346_Unlock);
+			RTL_W8 (Config1, tp->mii.full_duplex ? 0x60 : 0x20);
+			RTL_W8 (Cfg9346, Cfg9346_Lock);
+#endif
+		}
+	}
+
+	next_tick = HZ * 60;
+
+	rtl8139_tune_twister (dev, tp);
+
+	DPRINTK ("%s: Media selection tick, Link partner %4.4x.\n",
+		 dev->name, RTL_R16 (NWayLPAR));
+	DPRINTK ("%s:  Other registers are IntMask %4.4x IntStatus %4.4x\n",
+		 dev->name, RTL_R16 (IntrMask), RTL_R16 (IntrStatus));
+	DPRINTK ("%s:  Chip config %2.2x %2.2x.\n",
+		 dev->name, RTL_R8 (Config0),
+		 RTL_R8 (Config1));
+}
+
+static void rtl8139_thread (struct work_struct *work)
+{
+	struct rtl8139_private *tp =
+		container_of(work, struct rtl8139_private, thread.work);
+	struct net_device *dev = tp->mii.dev;
+	unsigned long thr_delay = next_tick;
+
+	rtnl_lock();
+
+	if (!netif_running(dev))
+		goto out_unlock;
+
+	if (tp->watchdog_fired) {
+		tp->watchdog_fired = 0;
+		rtl8139_tx_timeout_task(work);
+	} else
+		rtl8139_thread_iter(dev, tp, tp->mmio_addr);
+
+	if (tp->have_thread)
+		schedule_delayed_work(&tp->thread, thr_delay);
+out_unlock:
+	rtnl_unlock ();
+}
+
+static void rtl8139_start_thread(struct rtl8139_private *tp)
+{
+	tp->twistie = 0;
+	if (tp->chipset == CH_8139_K)
+		tp->twistie = 1;
+	else if (tp->drv_flags & HAS_LNK_CHNG)
+		return;
+
+	tp->have_thread = 1;
+	tp->watchdog_fired = 0;
+
+	schedule_delayed_work(&tp->thread, next_tick);
+}
+
+static inline void rtl8139_tx_clear (struct rtl8139_private *tp)
+{
+	tp->cur_tx = 0;
+	tp->dirty_tx = 0;
+
+	/* XXX account for unsent Tx packets in tp->stats.tx_dropped */
+}
+
+static void rtl8139_tx_timeout_task (struct work_struct *work)
+{
+	struct rtl8139_private *tp =
+		container_of(work, struct rtl8139_private, thread.work);
+	struct net_device *dev = tp->mii.dev;
+	void __iomem *ioaddr = tp->mmio_addr;
+	int i;
+	u8 tmp8;
+
+	printk (KERN_DEBUG "%s: Transmit timeout, status %2.2x %4.4x %4.4x "
+		"media %2.2x.\n", dev->name, RTL_R8 (ChipCmd),
+		RTL_R16(IntrStatus), RTL_R16(IntrMask), RTL_R8(MediaStatus));
+	/* Emit info to figure out what went wrong. */
+	printk (KERN_DEBUG "%s: Tx queue start entry %ld  dirty entry %ld.\n",
+		dev->name, tp->cur_tx, tp->dirty_tx);
+	for (i = 0; i < NUM_TX_DESC; i++)
+		printk (KERN_DEBUG "%s:  Tx descriptor %d is %8.8lx.%s\n",
+			dev->name, i, RTL_R32 (TxStatus0 + (i * 4)),
+			i == tp->dirty_tx % NUM_TX_DESC ?
+				" (queue head)" : "");
+
+	tp->xstats.tx_timeouts++;
+
+	/* disable Tx ASAP, if not already */
+	tmp8 = RTL_R8 (ChipCmd);
+	if (tmp8 & CmdTxEnb)
+		RTL_W8 (ChipCmd, CmdRxEnb);
+
+	if (tp->ecdev) {
+		rtl8139_tx_clear (tp);
+		rtl8139_hw_start (dev);
+	}
+	else {
+	  spin_lock_bh(&tp->rx_lock);
+	  /* Disable interrupts by clearing the interrupt mask. */
+	  RTL_W16 (IntrMask, 0x0000);
+
+	  /* Stop a shared interrupt from scavenging while we are. */
+	  spin_lock_irq(&tp->lock);
+	  rtl8139_tx_clear (tp);
+	  spin_unlock_irq(&tp->lock);
+
+	  /* ...and finally, reset everything */
+	  if (netif_running(dev)) {
+	    rtl8139_hw_start (dev);
+	    netif_wake_queue (dev);
+	  }
+	  spin_unlock_bh(&tp->rx_lock);
+	}
+}
+
+static void rtl8139_tx_timeout (struct net_device *dev)
+{
+	struct rtl8139_private *tp = netdev_priv(dev);
+
+	tp->watchdog_fired = 1;
+	if (!tp->ecdev && !tp->have_thread) {
+		INIT_DELAYED_WORK(&tp->thread, rtl8139_thread);
+		schedule_delayed_work(&tp->thread, next_tick);
+	}
+}
+
+static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev)
+{
+	struct rtl8139_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	unsigned int entry;
+	unsigned int len = skb->len;
+	unsigned long flags;
+
+	/* Calculate the next Tx descriptor entry. */
+	entry = tp->cur_tx % NUM_TX_DESC;
+
+	/* Note: the chip doesn't have auto-pad! */
+	if (likely(len < TX_BUF_SIZE)) {
+		if (len < ETH_ZLEN)
+			memset(tp->tx_buf[entry], 0, ETH_ZLEN);
+		skb_copy_and_csum_dev(skb, tp->tx_buf[entry]);
+		if (!tp->ecdev) dev_kfree_skb(skb);
+	} else {
+		if (!tp->ecdev) dev_kfree_skb(skb);
+		dev->stats.tx_dropped++;
+		return 0;
+	}
+
+	if (tp->ecdev) {
+		RTL_W32_F (TxStatus0 + (entry * sizeof (u32)),
+			tp->tx_flag | max(len, (unsigned int)ETH_ZLEN));
+
+		dev->trans_start = jiffies;
+
+		tp->cur_tx++;
+		wmb();
+	} else {
+		spin_lock_irqsave(&tp->lock, flags);
+		RTL_W32_F (TxStatus0 + (entry * sizeof (u32)),
+			   tp->tx_flag | max(len, (unsigned int)ETH_ZLEN));
+
+		dev->trans_start = jiffies;
+
+		tp->cur_tx++;
+		wmb();
+
+		if ((tp->cur_tx - NUM_TX_DESC) == tp->dirty_tx)
+			netif_stop_queue (dev);
+		spin_unlock_irqrestore(&tp->lock, flags);
+
+		if (netif_msg_tx_queued(tp))
+			printk (KERN_DEBUG "%s: Queued Tx packet size %u to slot %d.\n",
+				dev->name, len, entry);
+	}
+
+	return 0;
+}
+
+
+static void rtl8139_tx_interrupt (struct net_device *dev,
+				  struct rtl8139_private *tp,
+				  void __iomem *ioaddr)
+{
+	unsigned long dirty_tx, tx_left;
+
+	assert (dev != NULL);
+	assert (ioaddr != NULL);
+
+	dirty_tx = tp->dirty_tx;
+	tx_left = tp->cur_tx - dirty_tx;
+	while (tx_left > 0) {
+		int entry = dirty_tx % NUM_TX_DESC;
+		int txstatus;
+
+		txstatus = RTL_R32 (TxStatus0 + (entry * sizeof (u32)));
+
+		if (!(txstatus & (TxStatOK | TxUnderrun | TxAborted)))
+			break;	/* It still hasn't been Txed */
+
+		/* Note: TxCarrierLost is always asserted at 100mbps. */
+		if (txstatus & (TxOutOfWindow | TxAborted)) {
+			/* There was an major error, log it. */
+			if (netif_msg_tx_err(tp))
+				printk(KERN_DEBUG "%s: Transmit error, Tx status %8.8x.\n",
+					dev->name, txstatus);
+			dev->stats.tx_errors++;
+			if (txstatus & TxAborted) {
+				dev->stats.tx_aborted_errors++;
+				RTL_W32 (TxConfig, TxClearAbt);
+				RTL_W16 (IntrStatus, TxErr);
+				wmb();
+			}
+			if (txstatus & TxCarrierLost)
+				dev->stats.tx_carrier_errors++;
+			if (txstatus & TxOutOfWindow)
+				dev->stats.tx_window_errors++;
+		} else {
+			if (txstatus & TxUnderrun) {
+				/* Add 64 to the Tx FIFO threshold. */
+				if (tp->tx_flag < 0x00300000)
+					tp->tx_flag += 0x00020000;
+				dev->stats.tx_fifo_errors++;
+			}
+			dev->stats.collisions += (txstatus >> 24) & 15;
+			dev->stats.tx_bytes += txstatus & 0x7ff;
+			dev->stats.tx_packets++;
+		}
+
+		dirty_tx++;
+		tx_left--;
+	}
+
+#ifndef RTL8139_NDEBUG
+	if (!tp->ecdev && tp->cur_tx - dirty_tx > NUM_TX_DESC) {
+		printk (KERN_ERR "%s: Out-of-sync dirty pointer, %ld vs. %ld.\n",
+		        dev->name, dirty_tx, tp->cur_tx);
+		dirty_tx += NUM_TX_DESC;
+	}
+#endif /* RTL8139_NDEBUG */
+
+	/* only wake the queue if we did work, and the queue is stopped */
+	if (tp->dirty_tx != dirty_tx) {
+		tp->dirty_tx = dirty_tx;
+		mb();
+		if (!tp->ecdev) netif_wake_queue (dev);
+	}
+}
+
+
+/* TODO: clean this up!  Rx reset need not be this intensive */
+static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
+			    struct rtl8139_private *tp, void __iomem *ioaddr)
+{
+	u8 tmp8;
+#ifdef CONFIG_8139_OLD_RX_RESET
+	int tmp_work;
+#endif
+
+	if (netif_msg_rx_err (tp))
+		printk(KERN_DEBUG "%s: Ethernet frame had errors, status %8.8x.\n",
+			dev->name, rx_status);
+	dev->stats.rx_errors++;
+	if (!(rx_status & RxStatusOK)) {
+		if (rx_status & RxTooLong) {
+			DPRINTK ("%s: Oversized Ethernet frame, status %4.4x!\n",
+			 	dev->name, rx_status);
+			/* A.C.: The chip hangs here. */
+		}
+		if (rx_status & (RxBadSymbol | RxBadAlign))
+			dev->stats.rx_frame_errors++;
+		if (rx_status & (RxRunt | RxTooLong))
+			dev->stats.rx_length_errors++;
+		if (rx_status & RxCRCErr)
+			dev->stats.rx_crc_errors++;
+	} else {
+		tp->xstats.rx_lost_in_ring++;
+	}
+
+#ifndef CONFIG_8139_OLD_RX_RESET
+	tmp8 = RTL_R8 (ChipCmd);
+	RTL_W8 (ChipCmd, tmp8 & ~CmdRxEnb);
+	RTL_W8 (ChipCmd, tmp8);
+	RTL_W32 (RxConfig, tp->rx_config);
+	tp->cur_rx = 0;
+#else
+	/* Reset the receiver, based on RealTek recommendation. (Bug?) */
+
+	/* disable receive */
+	RTL_W8_F (ChipCmd, CmdTxEnb);
+	tmp_work = 200;
+	while (--tmp_work > 0) {
+		udelay(1);
+		tmp8 = RTL_R8 (ChipCmd);
+		if (!(tmp8 & CmdRxEnb))
+			break;
+	}
+	if (tmp_work <= 0)
+		printk (KERN_WARNING PFX "rx stop wait too long\n");
+	/* restart receive */
+	tmp_work = 200;
+	while (--tmp_work > 0) {
+		RTL_W8_F (ChipCmd, CmdRxEnb | CmdTxEnb);
+		udelay(1);
+		tmp8 = RTL_R8 (ChipCmd);
+		if ((tmp8 & CmdRxEnb) && (tmp8 & CmdTxEnb))
+			break;
+	}
+	if (tmp_work <= 0)
+		printk (KERN_WARNING PFX "tx/rx enable wait too long\n");
+
+	/* and reinitialize all rx related registers */
+	RTL_W8_F (Cfg9346, Cfg9346_Unlock);
+	/* Must enable Tx/Rx before setting transfer thresholds! */
+	RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
+
+	tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys;
+	RTL_W32 (RxConfig, tp->rx_config);
+	tp->cur_rx = 0;
+
+	DPRINTK("init buffer addresses\n");
+
+	/* Lock Config[01234] and BMCR register writes */
+	RTL_W8 (Cfg9346, Cfg9346_Lock);
+
+	/* init Rx ring buffer DMA address */
+	RTL_W32_F (RxBuf, tp->rx_ring_dma);
+
+	/* A.C.: Reset the multicast list. */
+	__set_rx_mode (dev);
+#endif
+}
+
+#if RX_BUF_IDX == 3
+static inline void wrap_copy(struct sk_buff *skb, const unsigned char *ring,
+				 u32 offset, unsigned int size)
+{
+	u32 left = RX_BUF_LEN - offset;
+
+	if (size > left) {
+		skb_copy_to_linear_data(skb, ring + offset, left);
+		skb_copy_to_linear_data_offset(skb, left, ring, size - left);
+	} else
+		skb_copy_to_linear_data(skb, ring + offset, size);
+}
+#endif
+
+static void rtl8139_isr_ack(struct rtl8139_private *tp)
+{
+	void __iomem *ioaddr = tp->mmio_addr;
+	u16 status;
+
+	status = RTL_R16 (IntrStatus) & RxAckBits;
+
+	/* Clear out errors and receive interrupts */
+	if (likely(status != 0)) {
+		if (unlikely(status & (RxFIFOOver | RxOverflow))) {
+			tp->dev->stats.rx_errors++;
+			if (status & RxFIFOOver)
+				tp->dev->stats.rx_fifo_errors++;
+		}
+		RTL_W16_F (IntrStatus, RxAckBits);
+	}
+}
+
+static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
+		      int budget)
+{
+	void __iomem *ioaddr = tp->mmio_addr;
+	int received = 0;
+	unsigned char *rx_ring = tp->rx_ring;
+	unsigned int cur_rx = tp->cur_rx;
+	unsigned int rx_size = 0;
+
+	DPRINTK ("%s: In rtl8139_rx(), current %4.4x BufAddr %4.4x,"
+		 " free to %4.4x, Cmd %2.2x.\n", dev->name, (u16)cur_rx,
+		 RTL_R16 (RxBufAddr),
+		 RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
+
+	while ((tp->ecdev || netif_running(dev))
+			&& received < budget
+			&& (RTL_R8 (ChipCmd) & RxBufEmpty) == 0) {
+		u32 ring_offset = cur_rx % RX_BUF_LEN;
+		u32 rx_status;
+		unsigned int pkt_size;
+		struct sk_buff *skb;
+
+		rmb();
+
+		/* read size+status of next frame from DMA ring buffer */
+		rx_status = le32_to_cpu (*(__le32 *) (rx_ring + ring_offset));
+		rx_size = rx_status >> 16;
+		pkt_size = rx_size - 4;
+
+		if (!tp->ecdev) {
+			if (netif_msg_rx_status(tp))
+				printk(KERN_DEBUG "%s:  rtl8139_rx() status %4.4x, size %4.4x,"
+				       " cur %4.4x.\n", dev->name, rx_status,
+				       rx_size, cur_rx);
+		}
+#if RTL8139_DEBUG > 2
+		{
+			int i;
+			DPRINTK ("%s: Frame contents ", dev->name);
+			for (i = 0; i < 70; i++)
+				printk (" %2.2x",
+					rx_ring[ring_offset + i]);
+			printk (".\n");
+		}
+#endif
+
+		/* Packet copy from FIFO still in progress.
+		 * Theoretically, this should never happen
+		 * since EarlyRx is disabled.
+		 */
+		if (unlikely(rx_size == 0xfff0)) {
+			if (!tp->fifo_copy_timeout)
+				tp->fifo_copy_timeout = jiffies + 2;
+			else if (time_after(jiffies, tp->fifo_copy_timeout)) {
+				DPRINTK ("%s: hung FIFO. Reset.", dev->name);
+				rx_size = 0;
+				goto no_early_rx;
+			}
+			if (netif_msg_intr(tp)) {
+				printk(KERN_DEBUG "%s: fifo copy in progress.",
+				       dev->name);
+			}
+			tp->xstats.early_rx++;
+			break;
+		}
+
+no_early_rx:
+		tp->fifo_copy_timeout = 0;
+
+		/* If Rx err or invalid rx_size/rx_status received
+		 * (which happens if we get lost in the ring),
+		 * Rx process gets reset, so we abort any further
+		 * Rx processing.
+		 */
+		if (unlikely((rx_size > (MAX_ETH_FRAME_SIZE+4)) ||
+			     (rx_size < 8) ||
+			     (!(rx_status & RxStatusOK)))) {
+			rtl8139_rx_err (rx_status, dev, tp, ioaddr);
+			received = -1;
+			goto out;
+		}
+
+		if (tp->ecdev) {
+			ecdev_receive(tp->ecdev,
+					&rx_ring[ring_offset + 4], pkt_size);
+					dev->last_rx = jiffies;
+					dev->stats.rx_bytes += pkt_size;
+					dev->stats.rx_packets++;
+		} else {
+			/* Malloc up new buffer, compatible with net-2e. */
+			/* Omit the four octet CRC from the length. */
+
+			skb = dev_alloc_skb (pkt_size + 2);
+			if (likely(skb)) {
+				skb_reserve (skb, 2);	/* 16 byte align the IP fields. */
+#if RX_BUF_IDX == 3
+				wrap_copy(skb, rx_ring, ring_offset+4, pkt_size);
+#else
+				skb_copy_to_linear_data (skb, &rx_ring[ring_offset + 4], pkt_size);
+#endif
+				skb_put (skb, pkt_size);
+
+				skb->protocol = eth_type_trans (skb, dev);
+
+				dev->last_rx = jiffies;
+				dev->stats.rx_bytes += pkt_size;
+				dev->stats.rx_packets++;
+
+				netif_receive_skb (skb);
+			} else {
+				if (net_ratelimit())
+					printk (KERN_WARNING
+						"%s: Memory squeeze, dropping packet.\n",
+						dev->name);
+				dev->stats.rx_dropped++;
+			}
+		}
+		received++;
+
+		cur_rx = (cur_rx + rx_size + 4 + 3) & ~3;
+		RTL_W16 (RxBufPtr, (u16) (cur_rx - 16));
+
+		rtl8139_isr_ack(tp);
+	}
+
+	if (unlikely(!received || rx_size == 0xfff0))
+		rtl8139_isr_ack(tp);
+
+#if RTL8139_DEBUG > 1
+	DPRINTK ("%s: Done rtl8139_rx(), current %4.4x BufAddr %4.4x,"
+		 " free to %4.4x, Cmd %2.2x.\n", dev->name, cur_rx,
+		 RTL_R16 (RxBufAddr),
+		 RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
+#endif
+
+	tp->cur_rx = cur_rx;
+
+	/*
+	 * The receive buffer should be mostly empty.
+	 * Tell NAPI to reenable the Rx irq.
+	 */
+	if (tp->fifo_copy_timeout)
+		received = budget;
+
+out:
+	return received;
+}
+
+
+static void rtl8139_weird_interrupt (struct net_device *dev,
+				     struct rtl8139_private *tp,
+				     void __iomem *ioaddr,
+				     int status, int link_changed)
+{
+	DPRINTK ("%s: Abnormal interrupt, status %8.8x.\n",
+		 dev->name, status);
+
+	assert (dev != NULL);
+	assert (tp != NULL);
+	assert (ioaddr != NULL);
+
+	/* Update the error count. */
+	dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+	RTL_W32 (RxMissed, 0);
+
+	if ((status & RxUnderrun) && link_changed &&
+	    (tp->drv_flags & HAS_LNK_CHNG)) {
+		rtl_check_media(dev, 0);
+		status &= ~RxUnderrun;
+	}
+
+	if (status & (RxUnderrun | RxErr))
+		dev->stats.rx_errors++;
+
+	if (status & PCSTimeout)
+		dev->stats.rx_length_errors++;
+	if (status & RxUnderrun)
+		dev->stats.rx_fifo_errors++;
+	if (status & PCIErr) {
+		u16 pci_cmd_status;
+		pci_read_config_word (tp->pci_dev, PCI_STATUS, &pci_cmd_status);
+		pci_write_config_word (tp->pci_dev, PCI_STATUS, pci_cmd_status);
+
+		printk (KERN_ERR "%s: PCI Bus error %4.4x.\n",
+			dev->name, pci_cmd_status);
+	}
+}
+
+static int rtl8139_poll(struct napi_struct *napi, int budget)
+{
+	struct rtl8139_private *tp = container_of(napi, struct rtl8139_private, napi);
+	struct net_device *dev = tp->dev;
+	void __iomem *ioaddr = tp->mmio_addr;
+	int work_done;
+
+	spin_lock(&tp->rx_lock);
+	work_done = 0;
+	if (likely(RTL_R16(IntrStatus) & RxAckBits))
+		work_done += rtl8139_rx(dev, tp, budget);
+
+	if (work_done < budget) {
+		unsigned long flags;
+		/*
+		 * Order is important since data can get interrupted
+		 * again when we think we are done.
+		 */
+		spin_lock_irqsave(&tp->lock, flags);
+		RTL_W16_F(IntrMask, rtl8139_intr_mask);
+		__netif_rx_complete(dev, napi);
+		spin_unlock_irqrestore(&tp->lock, flags);
+	}
+	spin_unlock(&tp->rx_lock);
+
+	return work_done;
+}
+
+void ec_poll(struct net_device *dev)
+{
+    rtl8139_interrupt(0, dev);
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+   after the Tx thread. */
+static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance)
+{
+	struct net_device *dev = (struct net_device *) dev_instance;
+	struct rtl8139_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	u16 status, ackstat;
+	int link_changed = 0; /* avoid bogus "uninit" warning */
+	int handled = 0;
+
+	if (tp->ecdev) {
+		status = RTL_R16 (IntrStatus);
+	}
+	else {
+		spin_lock (&tp->lock);
+		status = RTL_R16 (IntrStatus);
+
+		/* shared irq? */
+		if (unlikely((status & rtl8139_intr_mask) == 0))
+			goto out;
+	}
+
+	handled = 1;
+
+	/* h/w no longer present (hotplug?) or major error, bail */
+	if (unlikely(status == 0xFFFF))
+		goto out;
+
+	if (!tp->ecdev) {
+		/* close possible race's with dev_close */
+		if (unlikely(!netif_running(dev))) {
+			RTL_W16 (IntrMask, 0);
+			goto out;
+		}
+	}
+
+	/* Acknowledge all of the current interrupt sources ASAP, but
+	   an first get an additional status bit from CSCR. */
+	if (unlikely(status & RxUnderrun))
+		link_changed = RTL_R16 (CSCR) & CSCR_LinkChangeBit;
+
+	ackstat = status & ~(RxAckBits | TxErr);
+	if (ackstat)
+		RTL_W16 (IntrStatus, ackstat);
+
+	/* Receive packets are processed by poll routine.
+	   If not running start it now. */
+	if (status & RxAckBits){
+		if (tp->ecdev) {
+			/* EtherCAT device: Just receive all frames */
+			rtl8139_rx(dev, tp, 100); // FIXME
+		} else {
+			/* Mark for polling */
+			if (netif_rx_schedule_prep(dev, &tp->napi)) {
+				RTL_W16_F (IntrMask, rtl8139_norx_intr_mask);
+				__netif_rx_schedule(dev, &tp->napi);
+			}
+		}
+	}
+
+	/* Check uncommon events with one test. */
+	if (unlikely(status & (PCIErr | PCSTimeout | RxUnderrun | RxErr)))
+		rtl8139_weird_interrupt (dev, tp, ioaddr,
+					 status, link_changed);
+
+	if (status & (TxOK | TxErr)) {
+		rtl8139_tx_interrupt (dev, tp, ioaddr);
+		if (status & TxErr)
+			RTL_W16 (IntrStatus, TxErr);
+	}
+ out:
+	if (!tp->ecdev) spin_unlock (&tp->lock);
+
+	DPRINTK ("%s: exiting interrupt, intr_status=%#4.4x.\n",
+		 dev->name, RTL_R16 (IntrStatus));
+	return IRQ_RETVAL(handled);
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling receive - used by netconsole and other diagnostic tools
+ * to allow network i/o with interrupts disabled.
+ */
+static void rtl8139_poll_controller(struct net_device *dev)
+{
+	disable_irq(dev->irq);
+	rtl8139_interrupt(dev->irq, dev);
+	enable_irq(dev->irq);
+}
+#endif
+
+static int rtl8139_close (struct net_device *dev)
+{
+	struct rtl8139_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	unsigned long flags;
+
+	if (tp->ecdev) {
+		/* Stop the chip's Tx and Rx DMA processes. */
+		RTL_W8 (ChipCmd, 0);
+
+		/* Disable interrupts by clearing the interrupt mask. */
+		RTL_W16 (IntrMask, 0);
+
+		/* Update the error counts. */
+		dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+		RTL_W32 (RxMissed, 0);
+	} else {
+		netif_stop_queue(dev);
+		napi_disable(&tp->napi);
+
+		if (netif_msg_ifdown(tp))
+			printk(KERN_DEBUG "%s: Shutting down ethercard, status was 0x%4.4x.\n",
+				dev->name, RTL_R16 (IntrStatus));
+
+		spin_lock_irqsave (&tp->lock, flags);
+
+		/* Stop the chip's Tx and Rx DMA processes. */
+		RTL_W8 (ChipCmd, 0);
+
+		/* Disable interrupts by clearing the interrupt mask. */
+		RTL_W16 (IntrMask, 0);
+
+		/* Update the error counts. */
+		dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+		RTL_W32 (RxMissed, 0);
+
+		spin_unlock_irqrestore (&tp->lock, flags);
+
+		free_irq (dev->irq, dev);
+	}
+
+	rtl8139_tx_clear (tp);
+
+	dma_free_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
+			  tp->rx_ring, tp->rx_ring_dma);
+	dma_free_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
+			  tp->tx_bufs, tp->tx_bufs_dma);
+	tp->rx_ring = NULL;
+	tp->tx_bufs = NULL;
+
+	/* Green! Put the chip in low-power mode. */
+	RTL_W8 (Cfg9346, Cfg9346_Unlock);
+
+	if (rtl_chip_info[tp->chipset].flags & HasHltClk)
+		RTL_W8 (HltClk, 'H');	/* 'R' would leave the clock running. */
+
+	return 0;
+}
+
+
+/* Get the ethtool Wake-on-LAN settings.  Assumes that wol points to
+   kernel memory, *wol has been initialized as {ETHTOOL_GWOL}, and
+   other threads or interrupts aren't messing with the 8139.  */
+static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct rtl8139_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = np->mmio_addr;
+
+	spin_lock_irq(&np->lock);
+	if (rtl_chip_info[np->chipset].flags & HasLWake) {
+		u8 cfg3 = RTL_R8 (Config3);
+		u8 cfg5 = RTL_R8 (Config5);
+
+		wol->supported = WAKE_PHY | WAKE_MAGIC
+			| WAKE_UCAST | WAKE_MCAST | WAKE_BCAST;
+
+		wol->wolopts = 0;
+		if (cfg3 & Cfg3_LinkUp)
+			wol->wolopts |= WAKE_PHY;
+		if (cfg3 & Cfg3_Magic)
+			wol->wolopts |= WAKE_MAGIC;
+		/* (KON)FIXME: See how netdev_set_wol() handles the
+		   following constants.  */
+		if (cfg5 & Cfg5_UWF)
+			wol->wolopts |= WAKE_UCAST;
+		if (cfg5 & Cfg5_MWF)
+			wol->wolopts |= WAKE_MCAST;
+		if (cfg5 & Cfg5_BWF)
+			wol->wolopts |= WAKE_BCAST;
+	}
+	spin_unlock_irq(&np->lock);
+}
+
+
+/* Set the ethtool Wake-on-LAN settings.  Return 0 or -errno.  Assumes
+   that wol points to kernel memory and other threads or interrupts
+   aren't messing with the 8139.  */
+static int rtl8139_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct rtl8139_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = np->mmio_addr;
+	u32 support;
+	u8 cfg3, cfg5;
+
+	support = ((rtl_chip_info[np->chipset].flags & HasLWake)
+		   ? (WAKE_PHY | WAKE_MAGIC
+		      | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST)
+		   : 0);
+	if (wol->wolopts & ~support)
+		return -EINVAL;
+
+	spin_lock_irq(&np->lock);
+	cfg3 = RTL_R8 (Config3) & ~(Cfg3_LinkUp | Cfg3_Magic);
+	if (wol->wolopts & WAKE_PHY)
+		cfg3 |= Cfg3_LinkUp;
+	if (wol->wolopts & WAKE_MAGIC)
+		cfg3 |= Cfg3_Magic;
+	RTL_W8 (Cfg9346, Cfg9346_Unlock);
+	RTL_W8 (Config3, cfg3);
+	RTL_W8 (Cfg9346, Cfg9346_Lock);
+
+	cfg5 = RTL_R8 (Config5) & ~(Cfg5_UWF | Cfg5_MWF | Cfg5_BWF);
+	/* (KON)FIXME: These are untested.  We may have to set the
+	   CRC0, Wakeup0 and LSBCRC0 registers too, but I have no
+	   documentation.  */
+	if (wol->wolopts & WAKE_UCAST)
+		cfg5 |= Cfg5_UWF;
+	if (wol->wolopts & WAKE_MCAST)
+		cfg5 |= Cfg5_MWF;
+	if (wol->wolopts & WAKE_BCAST)
+		cfg5 |= Cfg5_BWF;
+	RTL_W8 (Config5, cfg5);	/* need not unlock via Cfg9346 */
+	spin_unlock_irq(&np->lock);
+
+	return 0;
+}
+
+static void rtl8139_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+	struct rtl8139_private *np = netdev_priv(dev);
+	strcpy(info->driver, DRV_NAME);
+	strcpy(info->version, DRV_VERSION);
+	strcpy(info->bus_info, pci_name(np->pci_dev));
+	info->regdump_len = np->regs_len;
+}
+
+static int rtl8139_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct rtl8139_private *np = netdev_priv(dev);
+	spin_lock_irq(&np->lock);
+	mii_ethtool_gset(&np->mii, cmd);
+	spin_unlock_irq(&np->lock);
+	return 0;
+}
+
+static int rtl8139_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct rtl8139_private *np = netdev_priv(dev);
+	int rc;
+	spin_lock_irq(&np->lock);
+	rc = mii_ethtool_sset(&np->mii, cmd);
+	spin_unlock_irq(&np->lock);
+	return rc;
+}
+
+static int rtl8139_nway_reset(struct net_device *dev)
+{
+	struct rtl8139_private *np = netdev_priv(dev);
+	return mii_nway_restart(&np->mii);
+}
+
+static u32 rtl8139_get_link(struct net_device *dev)
+{
+	struct rtl8139_private *np = netdev_priv(dev);
+	return mii_link_ok(&np->mii);
+}
+
+static u32 rtl8139_get_msglevel(struct net_device *dev)
+{
+	struct rtl8139_private *np = netdev_priv(dev);
+	return np->msg_enable;
+}
+
+static void rtl8139_set_msglevel(struct net_device *dev, u32 datum)
+{
+	struct rtl8139_private *np = netdev_priv(dev);
+	np->msg_enable = datum;
+}
+
+static int rtl8139_get_regs_len(struct net_device *dev)
+{
+	struct rtl8139_private *np;
+	/* TODO: we are too slack to do reg dumping for pio, for now */
+	if (use_io)
+		return 0;
+	np = netdev_priv(dev);
+	return np->regs_len;
+}
+
+static void rtl8139_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf)
+{
+	struct rtl8139_private *np;
+
+	/* TODO: we are too slack to do reg dumping for pio, for now */
+	if (use_io)
+		return;
+	np = netdev_priv(dev);
+
+	regs->version = RTL_REGS_VER;
+
+	spin_lock_irq(&np->lock);
+	memcpy_fromio(regbuf, np->mmio_addr, regs->len);
+	spin_unlock_irq(&np->lock);
+}
+
+static int rtl8139_get_sset_count(struct net_device *dev, int sset)
+{
+	switch (sset) {
+	case ETH_SS_STATS:
+		return RTL_NUM_STATS;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static void rtl8139_get_ethtool_stats(struct net_device *dev, struct ethtool_stats *stats, u64 *data)
+{
+	struct rtl8139_private *np = netdev_priv(dev);
+
+	data[0] = np->xstats.early_rx;
+	data[1] = np->xstats.tx_buf_mapped;
+	data[2] = np->xstats.tx_timeouts;
+	data[3] = np->xstats.rx_lost_in_ring;
+}
+
+static void rtl8139_get_strings(struct net_device *dev, u32 stringset, u8 *data)
+{
+	memcpy(data, ethtool_stats_keys, sizeof(ethtool_stats_keys));
+}
+
+static const struct ethtool_ops rtl8139_ethtool_ops = {
+	.get_drvinfo		= rtl8139_get_drvinfo,
+	.get_settings		= rtl8139_get_settings,
+	.set_settings		= rtl8139_set_settings,
+	.get_regs_len		= rtl8139_get_regs_len,
+	.get_regs		= rtl8139_get_regs,
+	.nway_reset		= rtl8139_nway_reset,
+	.get_link		= rtl8139_get_link,
+	.get_msglevel		= rtl8139_get_msglevel,
+	.set_msglevel		= rtl8139_set_msglevel,
+	.get_wol		= rtl8139_get_wol,
+	.set_wol		= rtl8139_set_wol,
+	.get_strings		= rtl8139_get_strings,
+	.get_sset_count		= rtl8139_get_sset_count,
+	.get_ethtool_stats	= rtl8139_get_ethtool_stats,
+};
+
+static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct rtl8139_private *np = netdev_priv(dev);
+	int rc;
+
+	if (np->ecdev || !netif_running(dev))
+		return -EINVAL;
+
+	spin_lock_irq(&np->lock);
+	rc = generic_mii_ioctl(&np->mii, if_mii(rq), cmd, NULL);
+	spin_unlock_irq(&np->lock);
+
+	return rc;
+}
+
+
+static struct net_device_stats *rtl8139_get_stats (struct net_device *dev)
+{
+	struct rtl8139_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	unsigned long flags;
+
+	if (tp->ecdev || netif_running(dev)) {
+		spin_lock_irqsave (&tp->lock, flags);
+		dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+		RTL_W32 (RxMissed, 0);
+		spin_unlock_irqrestore (&tp->lock, flags);
+	}
+
+	return &dev->stats;
+}
+
+/* Set or clear the multicast filter for this adaptor.
+   This routine is not state sensitive and need not be SMP locked. */
+
+static void __set_rx_mode (struct net_device *dev)
+{
+	struct rtl8139_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	u32 mc_filter[2];	/* Multicast hash filter */
+	int i, rx_mode;
+	u32 tmp;
+
+	DPRINTK ("%s:   rtl8139_set_rx_mode(%4.4x) done -- Rx config %8.8lx.\n",
+			dev->name, dev->flags, RTL_R32 (RxConfig));
+
+	/* Note: do not reorder, GCC is clever about common statements. */
+	if (dev->flags & IFF_PROMISC) {
+		rx_mode =
+		    AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
+		    AcceptAllPhys;
+		mc_filter[1] = mc_filter[0] = 0xffffffff;
+	} else if ((dev->mc_count > multicast_filter_limit)
+		   || (dev->flags & IFF_ALLMULTI)) {
+		/* Too many to filter perfectly -- accept all multicasts. */
+		rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
+		mc_filter[1] = mc_filter[0] = 0xffffffff;
+	} else {
+		struct dev_mc_list *mclist;
+		rx_mode = AcceptBroadcast | AcceptMyPhys;
+		mc_filter[1] = mc_filter[0] = 0;
+		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+		     i++, mclist = mclist->next) {
+			int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
+
+			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+			rx_mode |= AcceptMulticast;
+		}
+	}
+
+	/* We can safely update without stopping the chip. */
+	tmp = rtl8139_rx_config | rx_mode;
+	if (tp->rx_config != tmp) {
+		RTL_W32_F (RxConfig, tmp);
+		tp->rx_config = tmp;
+	}
+	RTL_W32_F (MAR0 + 0, mc_filter[0]);
+	RTL_W32_F (MAR0 + 4, mc_filter[1]);
+}
+
+static void rtl8139_set_rx_mode (struct net_device *dev)
+{
+	unsigned long flags;
+	struct rtl8139_private *tp = netdev_priv(dev);
+
+	spin_lock_irqsave (&tp->lock, flags);
+	__set_rx_mode(dev);
+	spin_unlock_irqrestore (&tp->lock, flags);
+}
+
+#ifdef CONFIG_PM
+
+static int rtl8139_suspend (struct pci_dev *pdev, pm_message_t state)
+{
+	struct net_device *dev = pci_get_drvdata (pdev);
+	struct rtl8139_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	unsigned long flags;
+
+	pci_save_state (pdev);
+
+	if (tp->ecdev || !netif_running (dev))
+		return 0;
+
+	netif_device_detach (dev);
+
+	spin_lock_irqsave (&tp->lock, flags);
+
+	/* Disable interrupts, stop Tx and Rx. */
+	RTL_W16 (IntrMask, 0);
+	RTL_W8 (ChipCmd, 0);
+
+	/* Update the error counts. */
+	dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+	RTL_W32 (RxMissed, 0);
+
+	spin_unlock_irqrestore (&tp->lock, flags);
+
+	pci_set_power_state (pdev, PCI_D3hot);
+
+	return 0;
+}
+
+
+static int rtl8139_resume (struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata (pdev);
+	struct rtl8139_private *tp = netdev_priv(dev);
+
+	pci_restore_state (pdev);
+	if (tp->ecdev || !netif_running (dev))
+		return 0;
+	pci_set_power_state (pdev, PCI_D0);
+	rtl8139_init_ring (dev);
+	rtl8139_hw_start (dev);
+	netif_device_attach (dev);
+	return 0;
+}
+
+#endif /* CONFIG_PM */
+
+
+static struct pci_driver rtl8139_pci_driver = {
+	.name		= DRV_NAME,
+	.id_table	= rtl8139_pci_tbl,
+	.probe		= rtl8139_init_one,
+	.remove		= __devexit_p(rtl8139_remove_one),
+#ifdef CONFIG_PM
+	.suspend	= rtl8139_suspend,
+	.resume		= rtl8139_resume,
+#endif /* CONFIG_PM */
+};
+
+
+static int __init rtl8139_init_module (void)
+{
+	/* when we're a module, we always print a version message,
+	 * even if no 8139 board is found.
+	 */
+#ifdef MODULE
+	printk (KERN_INFO RTL8139_DRIVER_NAME "\n");
+#endif
+
+	return pci_register_driver(&rtl8139_pci_driver);
+}
+
+
+static void __exit rtl8139_cleanup_module (void)
+{
+	pci_unregister_driver (&rtl8139_pci_driver);
+}
+
+
+module_init(rtl8139_init_module);
+module_exit(rtl8139_cleanup_module);
diff -r 61793d845ad6 -r 0625902b3904 devices/8139too-2.6.27-orig.c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/8139too-2.6.27-orig.c	Mon Mar 09 09:10:05 2009 +0000
@@ -0,0 +1,2632 @@
+/*
+
+	8139too.c: A RealTek RTL-8139 Fast Ethernet driver for Linux.
+
+	Maintained by Jeff Garzik <jgarzik@pobox.com>
+	Copyright 2000-2002 Jeff Garzik
+
+	Much code comes from Donald Becker's rtl8139.c driver,
+	versions 1.13 and older.  This driver was originally based
+	on rtl8139.c version 1.07.  Header of rtl8139.c version 1.13:
+
+	-----<snip>-----
+
+        	Written 1997-2001 by Donald Becker.
+		This software may be used and distributed according to the
+		terms of the GNU General Public License (GPL), incorporated
+		herein by reference.  Drivers based on or derived from this
+		code fall under the GPL and must retain the authorship,
+		copyright and license notice.  This file is not a complete
+		program and may only be used when the entire operating
+		system is licensed under the GPL.
+
+		This driver is for boards based on the RTL8129 and RTL8139
+		PCI ethernet chips.
+
+		The author may be reached as becker@scyld.com, or C/O Scyld
+		Computing Corporation 410 Severn Ave., Suite 210 Annapolis
+		MD 21403
+
+		Support and updates available at
+		http://www.scyld.com/network/rtl8139.html
+
+		Twister-tuning table provided by Kinston
+		<shangh@realtek.com.tw>.
+
+	-----<snip>-----
+
+	This software may be used and distributed according to the terms
+	of the GNU General Public License, incorporated herein by reference.
+
+	Contributors:
+
+		Donald Becker - he wrote the original driver, kudos to him!
+		(but please don't e-mail him for support, this isn't his driver)
+
+		Tigran Aivazian - bug fixes, skbuff free cleanup
+
+		Martin Mares - suggestions for PCI cleanup
+
+		David S. Miller - PCI DMA and softnet updates
+
+		Ernst Gill - fixes ported from BSD driver
+
+		Daniel Kobras - identified specific locations of
+			posted MMIO write bugginess
+
+		Gerard Sharp - bug fix, testing and feedback
+
+		David Ford - Rx ring wrap fix
+
+		Dan DeMaggio - swapped RTL8139 cards with me, and allowed me
+		to find and fix a crucial bug on older chipsets.
+
+		Donald Becker/Chris Butterworth/Marcus Westergren -
+		Noticed various Rx packet size-related buglets.
+
+		Santiago Garcia Mantinan - testing and feedback
+
+		Jens David - 2.2.x kernel backports
+
+		Martin Dennett - incredibly helpful insight on undocumented
+		features of the 8139 chips
+
+		Jean-Jacques Michel - bug fix
+
+		Tobias Ringström - Rx interrupt status checking suggestion
+
+		Andrew Morton - Clear blocked signals, avoid
+		buffer overrun setting current->comm.
+
+		Kalle Olavi Niemitalo - Wake-on-LAN ioctls
+
+		Robert Kuebel - Save kernel thread from dying on any signal.
+
+	Submitting bug reports:
+
+		"rtl8139-diag -mmmaaavvveefN" output
+		enable RTL8139_DEBUG below, and look at 'dmesg' or kernel log
+
+*/
+
+#define DRV_NAME	"8139too"
+#define DRV_VERSION	"0.9.28"
+
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/rtnetlink.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/completion.h>
+#include <linux/crc32.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <asm/irq.h>
+
+#define RTL8139_DRIVER_NAME   DRV_NAME " Fast Ethernet driver " DRV_VERSION
+#define PFX DRV_NAME ": "
+
+/* Default Message level */
+#define RTL8139_DEF_MSG_ENABLE   (NETIF_MSG_DRV   | \
+                                 NETIF_MSG_PROBE  | \
+                                 NETIF_MSG_LINK)
+
+
+/* define to 1, 2 or 3 to enable copious debugging info */
+#define RTL8139_DEBUG 0
+
+/* define to 1 to disable lightweight runtime debugging checks */
+#undef RTL8139_NDEBUG
+
+
+#if RTL8139_DEBUG
+/* note: prints function name for you */
+#  define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __func__ , ## args)
+#else
+#  define DPRINTK(fmt, args...)
+#endif
+
+#ifdef RTL8139_NDEBUG
+#  define assert(expr) do {} while (0)
+#else
+#  define assert(expr) \
+        if(unlikely(!(expr))) {				        \
+        printk(KERN_ERR "Assertion failed! %s,%s,%s,line=%d\n",	\
+	#expr, __FILE__, __func__, __LINE__);			\
+        }
+#endif
+
+
+/* A few user-configurable values. */
+/* media options */
+#define MAX_UNITS 8
+static int media[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
+static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
+
+/* Whether to use MMIO or PIO. Default to MMIO. */
+#ifdef CONFIG_8139TOO_PIO
+static int use_io = 1;
+#else
+static int use_io = 0;
+#endif
+
+/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
+   The RTL chips use a 64 element hash table based on the Ethernet CRC.  */
+static int multicast_filter_limit = 32;
+
+/* bitmapped message enable number */
+static int debug = -1;
+
+/*
+ * Receive ring size
+ * Warning: 64K ring has hardware issues and may lock up.
+ */
+#if defined(CONFIG_SH_DREAMCAST)
+#define RX_BUF_IDX 0	/* 8K ring */
+#else
+#define RX_BUF_IDX	2	/* 32K ring */
+#endif
+#define RX_BUF_LEN	(8192 << RX_BUF_IDX)
+#define RX_BUF_PAD	16
+#define RX_BUF_WRAP_PAD 2048 /* spare padding to handle lack of packet wrap */
+
+#if RX_BUF_LEN == 65536
+#define RX_BUF_TOT_LEN	RX_BUF_LEN
+#else
+#define RX_BUF_TOT_LEN	(RX_BUF_LEN + RX_BUF_PAD + RX_BUF_WRAP_PAD)
+#endif
+
+/* Number of Tx descriptor registers. */
+#define NUM_TX_DESC	4
+
+/* max supported ethernet frame size -- must be at least (dev->mtu+14+4).*/
+#define MAX_ETH_FRAME_SIZE	1536
+
+/* Size of the Tx bounce buffers -- must be at least (dev->mtu+14+4). */
+#define TX_BUF_SIZE	MAX_ETH_FRAME_SIZE
+#define TX_BUF_TOT_LEN	(TX_BUF_SIZE * NUM_TX_DESC)
+
+/* PCI Tuning Parameters
+   Threshold is bytes transferred to chip before transmission starts. */
+#define TX_FIFO_THRESH 256	/* In bytes, rounded down to 32 byte units. */
+
+/* The following settings are log_2(bytes)-4:  0 == 16 bytes .. 6==1024, 7==end of packet. */
+#define RX_FIFO_THRESH	7	/* Rx buffer level before first PCI xfer.  */
+#define RX_DMA_BURST	7	/* Maximum PCI burst, '6' is 1024 */
+#define TX_DMA_BURST	6	/* Maximum PCI burst, '6' is 1024 */
+#define TX_RETRY	8	/* 0-15.  retries = 16 + (TX_RETRY * 16) */
+
+/* Operational parameters that usually are not changed. */
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT  (6*HZ)
+
+
+enum {
+	HAS_MII_XCVR = 0x010000,
+	HAS_CHIP_XCVR = 0x020000,
+	HAS_LNK_CHNG = 0x040000,
+};
+
+#define RTL_NUM_STATS 4		/* number of ETHTOOL_GSTATS u64's */
+#define RTL_REGS_VER 1		/* version of reg. data in ETHTOOL_GREGS */
+#define RTL_MIN_IO_SIZE 0x80
+#define RTL8139B_IO_SIZE 256
+
+#define RTL8129_CAPS	HAS_MII_XCVR
+#define RTL8139_CAPS	(HAS_CHIP_XCVR|HAS_LNK_CHNG)
+
+typedef enum {
+	RTL8139 = 0,
+	RTL8129,
+} board_t;
+
+
+/* indexed by board_t, above */
+static const struct {
+	const char *name;
+	u32 hw_flags;
+} board_info[] __devinitdata = {
+	{ "RealTek RTL8139", RTL8139_CAPS },
+	{ "RealTek RTL8129", RTL8129_CAPS },
+};
+
+
+static struct pci_device_id rtl8139_pci_tbl[] = {
+	{0x10ec, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x10ec, 0x8138, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x1500, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x4033, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x1186, 0x1300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x1186, 0x1340, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x13d1, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x1259, 0xa117, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x1259, 0xa11e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x14ea, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x14ea, 0xab07, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x11db, 0x1234, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x1432, 0x9130, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x02ac, 0x1012, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x018a, 0x0106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x126c, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x1743, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+	{0x021b, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+
+#ifdef CONFIG_SH_SECUREEDGE5410
+	/* Bogus 8139 silicon reports 8129 without external PROM :-( */
+	{0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+#endif
+#ifdef CONFIG_8139TOO_8129
+	{0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8129 },
+#endif
+
+	/* some crazy cards report invalid vendor ids like
+	 * 0x0001 here.  The other ids are valid and constant,
+	 * so we simply don't match on the main vendor id.
+	 */
+	{PCI_ANY_ID, 0x8139, 0x10ec, 0x8139, 0, 0, RTL8139 },
+	{PCI_ANY_ID, 0x8139, 0x1186, 0x1300, 0, 0, RTL8139 },
+	{PCI_ANY_ID, 0x8139, 0x13d1, 0xab06, 0, 0, RTL8139 },
+
+	{0,}
+};
+MODULE_DEVICE_TABLE (pci, rtl8139_pci_tbl);
+
+static struct {
+	const char str[ETH_GSTRING_LEN];
+} ethtool_stats_keys[] = {
+	{ "early_rx" },
+	{ "tx_buf_mapped" },
+	{ "tx_timeouts" },
+	{ "rx_lost_in_ring" },
+};
+
+/* The rest of these values should never change. */
+
+/* Symbolic offsets to registers. */
+enum RTL8139_registers {
+	MAC0		= 0,	 /* Ethernet hardware address. */
+	MAR0		= 8,	 /* Multicast filter. */
+	TxStatus0	= 0x10,	 /* Transmit status (Four 32bit registers). */
+	TxAddr0		= 0x20,	 /* Tx descriptors (also four 32bit). */
+	RxBuf		= 0x30,
+	ChipCmd		= 0x37,
+	RxBufPtr	= 0x38,
+	RxBufAddr	= 0x3A,
+	IntrMask	= 0x3C,
+	IntrStatus	= 0x3E,
+	TxConfig	= 0x40,
+	RxConfig	= 0x44,
+	Timer		= 0x48,	 /* A general-purpose counter. */
+	RxMissed	= 0x4C,  /* 24 bits valid, write clears. */
+	Cfg9346		= 0x50,
+	Config0		= 0x51,
+	Config1		= 0x52,
+	FlashReg	= 0x54,
+	MediaStatus	= 0x58,
+	Config3		= 0x59,
+	Config4		= 0x5A,	 /* absent on RTL-8139A */
+	HltClk		= 0x5B,
+	MultiIntr	= 0x5C,
+	TxSummary	= 0x60,
+	BasicModeCtrl	= 0x62,
+	BasicModeStatus	= 0x64,
+	NWayAdvert	= 0x66,
+	NWayLPAR	= 0x68,
+	NWayExpansion	= 0x6A,
+	/* Undocumented registers, but required for proper operation. */
+	FIFOTMS		= 0x70,	 /* FIFO Control and test. */
+	CSCR		= 0x74,	 /* Chip Status and Configuration Register. */
+	PARA78		= 0x78,
+	PARA7c		= 0x7c,	 /* Magic transceiver parameter register. */
+	Config5		= 0xD8,	 /* absent on RTL-8139A */
+};
+
+enum ClearBitMasks {
+	MultiIntrClear	= 0xF000,
+	ChipCmdClear	= 0xE2,
+	Config1Clear	= (1<<7)|(1<<6)|(1<<3)|(1<<2)|(1<<1),
+};
+
+enum ChipCmdBits {
+	CmdReset	= 0x10,
+	CmdRxEnb	= 0x08,
+	CmdTxEnb	= 0x04,
+	RxBufEmpty	= 0x01,
+};
+
+/* Interrupt register bits, using my own meaningful names. */
+enum IntrStatusBits {
+	PCIErr		= 0x8000,
+	PCSTimeout	= 0x4000,
+	RxFIFOOver	= 0x40,
+	RxUnderrun	= 0x20,
+	RxOverflow	= 0x10,
+	TxErr		= 0x08,
+	TxOK		= 0x04,
+	RxErr		= 0x02,
+	RxOK		= 0x01,
+
+	RxAckBits	= RxFIFOOver | RxOverflow | RxOK,
+};
+
+enum TxStatusBits {
+	TxHostOwns	= 0x2000,
+	TxUnderrun	= 0x4000,
+	TxStatOK	= 0x8000,
+	TxOutOfWindow	= 0x20000000,
+	TxAborted	= 0x40000000,
+	TxCarrierLost	= 0x80000000,
+};
+enum RxStatusBits {
+	RxMulticast	= 0x8000,
+	RxPhysical	= 0x4000,
+	RxBroadcast	= 0x2000,
+	RxBadSymbol	= 0x0020,
+	RxRunt		= 0x0010,
+	RxTooLong	= 0x0008,
+	RxCRCErr	= 0x0004,
+	RxBadAlign	= 0x0002,
+	RxStatusOK	= 0x0001,
+};
+
+/* Bits in RxConfig. */
+enum rx_mode_bits {
+	AcceptErr	= 0x20,
+	AcceptRunt	= 0x10,
+	AcceptBroadcast	= 0x08,
+	AcceptMulticast	= 0x04,
+	AcceptMyPhys	= 0x02,
+	AcceptAllPhys	= 0x01,
+};
+
+/* Bits in TxConfig. */
+enum tx_config_bits {
+        /* Interframe Gap Time. Only TxIFG96 doesn't violate IEEE 802.3 */
+        TxIFGShift	= 24,
+        TxIFG84		= (0 << TxIFGShift), /* 8.4us / 840ns (10 / 100Mbps) */
+        TxIFG88		= (1 << TxIFGShift), /* 8.8us / 880ns (10 / 100Mbps) */
+        TxIFG92		= (2 << TxIFGShift), /* 9.2us / 920ns (10 / 100Mbps) */
+        TxIFG96		= (3 << TxIFGShift), /* 9.6us / 960ns (10 / 100Mbps) */
+
+	TxLoopBack	= (1 << 18) | (1 << 17), /* enable loopback test mode */
+	TxCRC		= (1 << 16),	/* DISABLE Tx pkt CRC append */
+	TxClearAbt	= (1 << 0),	/* Clear abort (WO) */
+	TxDMAShift	= 8, /* DMA burst value (0-7) is shifted X many bits */
+	TxRetryShift	= 4, /* TXRR value (0-15) is shifted X many bits */
+
+	TxVersionMask	= 0x7C800000, /* mask out version bits 30-26, 23 */
+};
+
+/* Bits in Config1 */
+enum Config1Bits {
+	Cfg1_PM_Enable	= 0x01,
+	Cfg1_VPD_Enable	= 0x02,
+	Cfg1_PIO	= 0x04,
+	Cfg1_MMIO	= 0x08,
+	LWAKE		= 0x10,		/* not on 8139, 8139A */
+	Cfg1_Driver_Load = 0x20,
+	Cfg1_LED0	= 0x40,
+	Cfg1_LED1	= 0x80,
+	SLEEP		= (1 << 1),	/* only on 8139, 8139A */
+	PWRDN		= (1 << 0),	/* only on 8139, 8139A */
+};
+
+/* Bits in Config3 */
+enum Config3Bits {
+	Cfg3_FBtBEn   	= (1 << 0), /* 1	= Fast Back to Back */
+	Cfg3_FuncRegEn	= (1 << 1), /* 1	= enable CardBus Function registers */
+	Cfg3_CLKRUN_En	= (1 << 2), /* 1	= enable CLKRUN */
+	Cfg3_CardB_En 	= (1 << 3), /* 1	= enable CardBus registers */
+	Cfg3_LinkUp   	= (1 << 4), /* 1	= wake up on link up */
+	Cfg3_Magic    	= (1 << 5), /* 1	= wake up on Magic Packet (tm) */
+	Cfg3_PARM_En  	= (1 << 6), /* 0	= software can set twister parameters */
+	Cfg3_GNTSel   	= (1 << 7), /* 1	= delay 1 clock from PCI GNT signal */
+};
+
+/* Bits in Config4 */
+enum Config4Bits {
+	LWPTN	= (1 << 2),	/* not on 8139, 8139A */
+};
+
+/* Bits in Config5 */
+enum Config5Bits {
+	Cfg5_PME_STS   	= (1 << 0), /* 1	= PCI reset resets PME_Status */
+	Cfg5_LANWake   	= (1 << 1), /* 1	= enable LANWake signal */
+	Cfg5_LDPS      	= (1 << 2), /* 0	= save power when link is down */
+	Cfg5_FIFOAddrPtr= (1 << 3), /* Realtek internal SRAM testing */
+	Cfg5_UWF        = (1 << 4), /* 1 = accept unicast wakeup frame */
+	Cfg5_MWF        = (1 << 5), /* 1 = accept multicast wakeup frame */
+	Cfg5_BWF        = (1 << 6), /* 1 = accept broadcast wakeup frame */
+};
+
+enum RxConfigBits {
+	/* rx fifo threshold */
+	RxCfgFIFOShift	= 13,
+	RxCfgFIFONone	= (7 << RxCfgFIFOShift),
+
+	/* Max DMA burst */
+	RxCfgDMAShift	= 8,
+	RxCfgDMAUnlimited = (7 << RxCfgDMAShift),
+
+	/* rx ring buffer length */
+	RxCfgRcv8K	= 0,
+	RxCfgRcv16K	= (1 << 11),
+	RxCfgRcv32K	= (1 << 12),
+	RxCfgRcv64K	= (1 << 11) | (1 << 12),
+
+	/* Disable packet wrap at end of Rx buffer. (not possible with 64k) */
+	RxNoWrap	= (1 << 7),
+};
+
+/* Twister tuning parameters from RealTek.
+   Completely undocumented, but required to tune bad links on some boards. */
+enum CSCRBits {
+	CSCR_LinkOKBit		= 0x0400,
+	CSCR_LinkChangeBit	= 0x0800,
+	CSCR_LinkStatusBits	= 0x0f000,
+	CSCR_LinkDownOffCmd	= 0x003c0,
+	CSCR_LinkDownCmd	= 0x0f3c0,
+};
+
+enum Cfg9346Bits {
+	Cfg9346_Lock	= 0x00,
+	Cfg9346_Unlock	= 0xC0,
+};
+
+typedef enum {
+	CH_8139	= 0,
+	CH_8139_K,
+	CH_8139A,
+	CH_8139A_G,
+	CH_8139B,
+	CH_8130,
+	CH_8139C,
+	CH_8100,
+	CH_8100B_8139D,
+	CH_8101,
+} chip_t;
+
+enum chip_flags {
+	HasHltClk	= (1 << 0),
+	HasLWake	= (1 << 1),
+};
+
+#define HW_REVID(b30, b29, b28, b27, b26, b23, b22) \
+	(b30<<30 | b29<<29 | b28<<28 | b27<<27 | b26<<26 | b23<<23 | b22<<22)
+#define HW_REVID_MASK	HW_REVID(1, 1, 1, 1, 1, 1, 1)
+
+/* directly indexed by chip_t, above */
+static const struct {
+	const char *name;
+	u32 version; /* from RTL8139C/RTL8139D docs */
+	u32 flags;
+} rtl_chip_info[] = {
+	{ "RTL-8139",
+	  HW_REVID(1, 0, 0, 0, 0, 0, 0),
+	  HasHltClk,
+	},
+
+	{ "RTL-8139 rev K",
+	  HW_REVID(1, 1, 0, 0, 0, 0, 0),
+	  HasHltClk,
+	},
+
+	{ "RTL-8139A",
+	  HW_REVID(1, 1, 1, 0, 0, 0, 0),
+	  HasHltClk, /* XXX undocumented? */
+	},
+
+	{ "RTL-8139A rev G",
+	  HW_REVID(1, 1, 1, 0, 0, 1, 0),
+	  HasHltClk, /* XXX undocumented? */
+	},
+
+	{ "RTL-8139B",
+	  HW_REVID(1, 1, 1, 1, 0, 0, 0),
+	  HasLWake,
+	},
+
+	{ "RTL-8130",
+	  HW_REVID(1, 1, 1, 1, 1, 0, 0),
+	  HasLWake,
+	},
+
+	{ "RTL-8139C",
+	  HW_REVID(1, 1, 1, 0, 1, 0, 0),
+	  HasLWake,
+	},
+
+	{ "RTL-8100",
+	  HW_REVID(1, 1, 1, 1, 0, 1, 0),
+ 	  HasLWake,
+ 	},
+
+	{ "RTL-8100B/8139D",
+	  HW_REVID(1, 1, 1, 0, 1, 0, 1),
+	  HasHltClk /* XXX undocumented? */
+	| HasLWake,
+	},
+
+	{ "RTL-8101",
+	  HW_REVID(1, 1, 1, 0, 1, 1, 1),
+	  HasLWake,
+	},
+};
+
+struct rtl_extra_stats {
+	unsigned long early_rx;
+	unsigned long tx_buf_mapped;
+	unsigned long tx_timeouts;
+	unsigned long rx_lost_in_ring;
+};
+
+struct rtl8139_private {
+	void __iomem		*mmio_addr;
+	int			drv_flags;
+	struct pci_dev		*pci_dev;
+	u32			msg_enable;
+	struct napi_struct	napi;
+	struct net_device	*dev;
+
+	unsigned char		*rx_ring;
+	unsigned int		cur_rx;	/* RX buf index of next pkt */
+	dma_addr_t		rx_ring_dma;
+
+	unsigned int		tx_flag;
+	unsigned long		cur_tx;
+	unsigned long		dirty_tx;
+	unsigned char		*tx_buf[NUM_TX_DESC];	/* Tx bounce buffers */
+	unsigned char		*tx_bufs;	/* Tx bounce buffer region. */
+	dma_addr_t		tx_bufs_dma;
+
+	signed char		phys[4];	/* MII device addresses. */
+
+				/* Twister tune state. */
+	char			twistie, twist_row, twist_col;
+
+	unsigned int		watchdog_fired : 1;
+	unsigned int		default_port : 4; /* Last dev->if_port value. */
+	unsigned int		have_thread : 1;
+
+	spinlock_t		lock;
+	spinlock_t		rx_lock;
+
+	chip_t			chipset;
+	u32			rx_config;
+	struct rtl_extra_stats	xstats;
+
+	struct delayed_work	thread;
+
+	struct mii_if_info	mii;
+	unsigned int		regs_len;
+	unsigned long		fifo_copy_timeout;
+};
+
+MODULE_AUTHOR ("Jeff Garzik <jgarzik@pobox.com>");
+MODULE_DESCRIPTION ("RealTek RTL-8139 Fast Ethernet driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+module_param(use_io, int, 0);
+MODULE_PARM_DESC(use_io, "Force use of I/O access mode. 0=MMIO 1=PIO");
+module_param(multicast_filter_limit, int, 0);
+module_param_array(media, int, NULL, 0);
+module_param_array(full_duplex, int, NULL, 0);
+module_param(debug, int, 0);
+MODULE_PARM_DESC (debug, "8139too bitmapped message enable number");
+MODULE_PARM_DESC (multicast_filter_limit, "8139too maximum number of filtered multicast addresses");
+MODULE_PARM_DESC (media, "8139too: Bits 4+9: force full duplex, bit 5: 100Mbps");
+MODULE_PARM_DESC (full_duplex, "8139too: Force full duplex for board(s) (1)");
+
+static int read_eeprom (void __iomem *ioaddr, int location, int addr_len);
+static int rtl8139_open (struct net_device *dev);
+static int mdio_read (struct net_device *dev, int phy_id, int location);
+static void mdio_write (struct net_device *dev, int phy_id, int location,
+			int val);
+static void rtl8139_start_thread(struct rtl8139_private *tp);
+static void rtl8139_tx_timeout (struct net_device *dev);
+static void rtl8139_init_ring (struct net_device *dev);
+static int rtl8139_start_xmit (struct sk_buff *skb,
+			       struct net_device *dev);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void rtl8139_poll_controller(struct net_device *dev);
+#endif
+static int rtl8139_poll(struct napi_struct *napi, int budget);
+static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance);
+static int rtl8139_close (struct net_device *dev);
+static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd);
+static struct net_device_stats *rtl8139_get_stats (struct net_device *dev);
+static void rtl8139_set_rx_mode (struct net_device *dev);
+static void __set_rx_mode (struct net_device *dev);
+static void rtl8139_hw_start (struct net_device *dev);
+static void rtl8139_thread (struct work_struct *work);
+static void rtl8139_tx_timeout_task(struct work_struct *work);
+static const struct ethtool_ops rtl8139_ethtool_ops;
+
+/* write MMIO register, with flush */
+/* Flush avoids rtl8139 bug w/ posted MMIO writes */
+#define RTL_W8_F(reg, val8)	do { iowrite8 ((val8), ioaddr + (reg)); ioread8 (ioaddr + (reg)); } while (0)
+#define RTL_W16_F(reg, val16)	do { iowrite16 ((val16), ioaddr + (reg)); ioread16 (ioaddr + (reg)); } while (0)
+#define RTL_W32_F(reg, val32)	do { iowrite32 ((val32), ioaddr + (reg)); ioread32 (ioaddr + (reg)); } while (0)
+
+/* write MMIO register */
+#define RTL_W8(reg, val8)	iowrite8 ((val8), ioaddr + (reg))
+#define RTL_W16(reg, val16)	iowrite16 ((val16), ioaddr + (reg))
+#define RTL_W32(reg, val32)	iowrite32 ((val32), ioaddr + (reg))
+
+/* read MMIO register */
+#define RTL_R8(reg)		ioread8 (ioaddr + (reg))
+#define RTL_R16(reg)		ioread16 (ioaddr + (reg))
+#define RTL_R32(reg)		((unsigned long) ioread32 (ioaddr + (reg)))
+
+
+static const u16 rtl8139_intr_mask =
+	PCIErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver |
+	TxErr | TxOK | RxErr | RxOK;
+
+static const u16 rtl8139_norx_intr_mask =
+	PCIErr | PCSTimeout | RxUnderrun |
+	TxErr | TxOK | RxErr ;
+
+#if RX_BUF_IDX == 0
+static const unsigned int rtl8139_rx_config =
+	RxCfgRcv8K | RxNoWrap |
+	(RX_FIFO_THRESH << RxCfgFIFOShift) |
+	(RX_DMA_BURST << RxCfgDMAShift);
+#elif RX_BUF_IDX == 1
+static const unsigned int rtl8139_rx_config =
+	RxCfgRcv16K | RxNoWrap |
+	(RX_FIFO_THRESH << RxCfgFIFOShift) |
+	(RX_DMA_BURST << RxCfgDMAShift);
+#elif RX_BUF_IDX == 2
+static const unsigned int rtl8139_rx_config =
+	RxCfgRcv32K | RxNoWrap |
+	(RX_FIFO_THRESH << RxCfgFIFOShift) |
+	(RX_DMA_BURST << RxCfgDMAShift);
+#elif RX_BUF_IDX == 3
+static const unsigned int rtl8139_rx_config =
+	RxCfgRcv64K |
+	(RX_FIFO_THRESH << RxCfgFIFOShift) |
+	(RX_DMA_BURST << RxCfgDMAShift);
+#else
+#error "Invalid configuration for 8139_RXBUF_IDX"
+#endif
+
+static const unsigned int rtl8139_tx_config =
+	TxIFG96 | (TX_DMA_BURST << TxDMAShift) | (TX_RETRY << TxRetryShift);
+
+static void __rtl8139_cleanup_dev (struct net_device *dev)
+{
+	struct rtl8139_private *tp = netdev_priv(dev);
+	struct pci_dev *pdev;
+
+	assert (dev != NULL);
+	assert (tp->pci_dev != NULL);
+	pdev = tp->pci_dev;
+
+	if (tp->mmio_addr)
+		pci_iounmap (pdev, tp->mmio_addr);
+
+	/* it's ok to call this even if we have no regions to free */
+	pci_release_regions (pdev);
+
+	free_netdev(dev);
+	pci_set_drvdata (pdev, NULL);
+}
+
+
+static void rtl8139_chip_reset (void __iomem *ioaddr)
+{
+	int i;
+
+	/* Soft reset the chip. */
+	RTL_W8 (ChipCmd, CmdReset);
+
+	/* Check that the chip has finished the reset. */
+	for (i = 1000; i > 0; i--) {
+		barrier();
+		if ((RTL_R8 (ChipCmd) & CmdReset) == 0)
+			break;
+		udelay (10);
+	}
+}
+
+
+static int __devinit rtl8139_init_board (struct pci_dev *pdev,
+					 struct net_device **dev_out)
+{
+	void __iomem *ioaddr;
+	struct net_device *dev;
+	struct rtl8139_private *tp;
+	u8 tmp8;
+	int rc, disable_dev_on_err = 0;
+	unsigned int i;
+	unsigned long pio_start, pio_end, pio_flags, pio_len;
+	unsigned long mmio_start, mmio_end, mmio_flags, mmio_len;
+	u32 version;
+
+	assert (pdev != NULL);
+
+	*dev_out = NULL;
+
+	/* dev and priv zeroed in alloc_etherdev */
+	dev = alloc_etherdev (sizeof (*tp));
+	if (dev == NULL) {
+		dev_err(&pdev->dev, "Unable to alloc new net device\n");
+		return -ENOMEM;
+	}
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	tp = netdev_priv(dev);
+	tp->pci_dev = pdev;
+
+	/* enable device (incl. PCI PM wakeup and hotplug setup) */
+	rc = pci_enable_device (pdev);
+	if (rc)
+		goto err_out;
+
+	pio_start = pci_resource_start (pdev, 0);
+	pio_end = pci_resource_end (pdev, 0);
+	pio_flags = pci_resource_flags (pdev, 0);
+	pio_len = pci_resource_len (pdev, 0);
+
+	mmio_start = pci_resource_start (pdev, 1);
+	mmio_end = pci_resource_end (pdev, 1);
+	mmio_flags = pci_resource_flags (pdev, 1);
+	mmio_len = pci_resource_len (pdev, 1);
+
+	/* set this immediately, we need to know before
+	 * we talk to the chip directly */
+	DPRINTK("PIO region size == 0x%02X\n", pio_len);
+	DPRINTK("MMIO region size == 0x%02lX\n", mmio_len);
+
+retry:
+	if (use_io) {
+		/* make sure PCI base addr 0 is PIO */
+		if (!(pio_flags & IORESOURCE_IO)) {
+			dev_err(&pdev->dev, "region #0 not a PIO resource, aborting\n");
+			rc = -ENODEV;
+			goto err_out;
+		}
+		/* check for weird/broken PCI region reporting */
+		if (pio_len < RTL_MIN_IO_SIZE) {
+			dev_err(&pdev->dev, "Invalid PCI I/O region size(s), aborting\n");
+			rc = -ENODEV;
+			goto err_out;
+		}
+	} else {
+		/* make sure PCI base addr 1 is MMIO */
+		if (!(mmio_flags & IORESOURCE_MEM)) {
+			dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n");
+			rc = -ENODEV;
+			goto err_out;
+		}
+		if (mmio_len < RTL_MIN_IO_SIZE) {
+			dev_err(&pdev->dev, "Invalid PCI mem region size(s), aborting\n");
+			rc = -ENODEV;
+			goto err_out;
+		}
+	}
+
+	rc = pci_request_regions (pdev, DRV_NAME);
+	if (rc)
+		goto err_out;
+	disable_dev_on_err = 1;
+
+	/* enable PCI bus-mastering */
+	pci_set_master (pdev);
+
+	if (use_io) {
+		ioaddr = pci_iomap(pdev, 0, 0);
+		if (!ioaddr) {
+			dev_err(&pdev->dev, "cannot map PIO, aborting\n");
+			rc = -EIO;
+			goto err_out;
+		}
+		dev->base_addr = pio_start;
+		tp->regs_len = pio_len;
+	} else {
+		/* ioremap MMIO region */
+		ioaddr = pci_iomap(pdev, 1, 0);
+		if (ioaddr == NULL) {
+			dev_err(&pdev->dev, "cannot remap MMIO, trying PIO\n");
+			pci_release_regions(pdev);
+			use_io = 1;
+			goto retry;
+		}
+		dev->base_addr = (long) ioaddr;
+		tp->regs_len = mmio_len;
+	}
+	tp->mmio_addr = ioaddr;
+
+	/* Bring old chips out of low-power mode. */
+	RTL_W8 (HltClk, 'R');
+
+	/* check for missing/broken hardware */
+	if (RTL_R32 (TxConfig) == 0xFFFFFFFF) {
+		dev_err(&pdev->dev, "Chip not responding, ignoring board\n");
+		rc = -EIO;
+		goto err_out;
+	}
+
+	/* identify chip attached to board */
+	version = RTL_R32 (TxConfig) & HW_REVID_MASK;
+	for (i = 0; i < ARRAY_SIZE (rtl_chip_info); i++)
+		if (version == rtl_chip_info[i].version) {
+			tp->chipset = i;
+			goto match;
+		}
+
+	/* if unknown chip, assume array element #0, original RTL-8139 in this case */
+	dev_printk (KERN_DEBUG, &pdev->dev,
+		    "unknown chip version, assuming RTL-8139\n");
+	dev_printk (KERN_DEBUG, &pdev->dev,
+		    "TxConfig = 0x%lx\n", RTL_R32 (TxConfig));
+	tp->chipset = 0;
+
+match:
+	DPRINTK ("chipset id (%d) == index %d, '%s'\n",
+		 version, i, rtl_chip_info[i].name);
+
+	if (tp->chipset >= CH_8139B) {
+		u8 new_tmp8 = tmp8 = RTL_R8 (Config1);
+		DPRINTK("PCI PM wakeup\n");
+		if ((rtl_chip_info[tp->chipset].flags & HasLWake) &&
+		    (tmp8 & LWAKE))
+			new_tmp8 &= ~LWAKE;
+		new_tmp8 |= Cfg1_PM_Enable;
+		if (new_tmp8 != tmp8) {
+			RTL_W8 (Cfg9346, Cfg9346_Unlock);
+			RTL_W8 (Config1, tmp8);
+			RTL_W8 (Cfg9346, Cfg9346_Lock);
+		}
+		if (rtl_chip_info[tp->chipset].flags & HasLWake) {
+			tmp8 = RTL_R8 (Config4);
+			if (tmp8 & LWPTN) {
+				RTL_W8 (Cfg9346, Cfg9346_Unlock);
+				RTL_W8 (Config4, tmp8 & ~LWPTN);
+				RTL_W8 (Cfg9346, Cfg9346_Lock);
+			}
+		}
+	} else {
+		DPRINTK("Old chip wakeup\n");
+		tmp8 = RTL_R8 (Config1);
+		tmp8 &= ~(SLEEP | PWRDN);
+		RTL_W8 (Config1, tmp8);
+	}
+
+	rtl8139_chip_reset (ioaddr);
+
+	*dev_out = dev;
+	return 0;
+
+err_out:
+	__rtl8139_cleanup_dev (dev);
+	if (disable_dev_on_err)
+		pci_disable_device (pdev);
+	return rc;
+}
+
+
+static int __devinit rtl8139_init_one (struct pci_dev *pdev,
+				       const struct pci_device_id *ent)
+{
+	struct net_device *dev = NULL;
+	struct rtl8139_private *tp;
+	int i, addr_len, option;
+	void __iomem *ioaddr;
+	static int board_idx = -1;
+	DECLARE_MAC_BUF(mac);
+
+	assert (pdev != NULL);
+	assert (ent != NULL);
+
+	board_idx++;
+
+	/* when we're built into the kernel, the driver version message
+	 * is only printed if at least one 8139 board has been found
+	 */
+#ifndef MODULE
+	{
+		static int printed_version;
+		if (!printed_version++)
+			printk (KERN_INFO RTL8139_DRIVER_NAME "\n");
+	}
+#endif
+
+	if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
+	    pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pdev->revision >= 0x20) {
+		dev_info(&pdev->dev,
+			   "This (id %04x:%04x rev %02x) is an enhanced 8139C+ chip\n",
+		       	   pdev->vendor, pdev->device, pdev->revision);
+		dev_info(&pdev->dev,
+			   "Use the \"8139cp\" driver for improved performance and stability.\n");
+	}
+
+	if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
+	    pdev->device == PCI_DEVICE_ID_REALTEK_8139 &&
+	    pdev->subsystem_vendor == PCI_VENDOR_ID_ATHEROS &&
+	    pdev->subsystem_device == PCI_DEVICE_ID_REALTEK_8139) {
+		printk(KERN_INFO "8139too: OQO Model 2 detected. Forcing PIO\n");
+		use_io = 1;
+	}
+
+	i = rtl8139_init_board (pdev, &dev);
+	if (i < 0)
+		return i;
+
+	assert (dev != NULL);
+	tp = netdev_priv(dev);
+	tp->dev = dev;
+
+	ioaddr = tp->mmio_addr;
+	assert (ioaddr != NULL);
+
+	addr_len = read_eeprom (ioaddr, 0, 8) == 0x8129 ? 8 : 6;
+	for (i = 0; i < 3; i++)
+		((__le16 *) (dev->dev_addr))[i] =
+		    cpu_to_le16(read_eeprom (ioaddr, i + 7, addr_len));
+	memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
+
+	/* The Rtl8139-specific entries in the device structure. */
+	dev->open = rtl8139_open;
+	dev->hard_start_xmit = rtl8139_start_xmit;
+	netif_napi_add(dev, &tp->napi, rtl8139_poll, 64);
+	dev->stop = rtl8139_close;
+	dev->get_stats = rtl8139_get_stats;
+	dev->set_multicast_list = rtl8139_set_rx_mode;
+	dev->do_ioctl = netdev_ioctl;
+	dev->ethtool_ops = &rtl8139_ethtool_ops;
+	dev->tx_timeout = rtl8139_tx_timeout;
+	dev->watchdog_timeo = TX_TIMEOUT;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	dev->poll_controller = rtl8139_poll_controller;
+#endif
+
+	/* note: the hardware is not capable of sg/csum/highdma, however
+	 * through the use of skb_copy_and_csum_dev we enable these
+	 * features
+	 */
+	dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA;
+
+	dev->irq = pdev->irq;
+
+	/* tp zeroed and aligned in alloc_etherdev */
+	tp = netdev_priv(dev);
+
+	/* note: tp->chipset set in rtl8139_init_board */
+	tp->drv_flags = board_info[ent->driver_data].hw_flags;
+	tp->mmio_addr = ioaddr;
+	tp->msg_enable =
+		(debug < 0 ? RTL8139_DEF_MSG_ENABLE : ((1 << debug) - 1));
+	spin_lock_init (&tp->lock);
+	spin_lock_init (&tp->rx_lock);
+	INIT_DELAYED_WORK(&tp->thread, rtl8139_thread);
+	tp->mii.dev = dev;
+	tp->mii.mdio_read = mdio_read;
+	tp->mii.mdio_write = mdio_write;
+	tp->mii.phy_id_mask = 0x3f;
+	tp->mii.reg_num_mask = 0x1f;
+
+	/* dev is fully set up and ready to use now */
+	DPRINTK("about to register device named %s (%p)...\n", dev->name, dev);
+	i = register_netdev (dev);
+	if (i) goto err_out;
+
+	pci_set_drvdata (pdev, dev);
+
+	printk (KERN_INFO "%s: %s at 0x%lx, "
+		"%s, IRQ %d\n",
+		dev->name,
+		board_info[ent->driver_data].name,
+		dev->base_addr,
+		print_mac(mac, dev->dev_addr),
+		dev->irq);
+
+	printk (KERN_DEBUG "%s:  Identified 8139 chip type '%s'\n",
+		dev->name, rtl_chip_info[tp->chipset].name);
+
+	/* Find the connected MII xcvrs.
+	   Doing this in open() would allow detecting external xcvrs later, but
+	   takes too much time. */
+#ifdef CONFIG_8139TOO_8129
+	if (tp->drv_flags & HAS_MII_XCVR) {
+		int phy, phy_idx = 0;
+		for (phy = 0; phy < 32 && phy_idx < sizeof(tp->phys); phy++) {
+			int mii_status = mdio_read(dev, phy, 1);
+			if (mii_status != 0xffff  &&  mii_status != 0x0000) {
+				u16 advertising = mdio_read(dev, phy, 4);
+				tp->phys[phy_idx++] = phy;
+				printk(KERN_INFO "%s: MII transceiver %d status 0x%4.4x "
+					   "advertising %4.4x.\n",
+					   dev->name, phy, mii_status, advertising);
+			}
+		}
+		if (phy_idx == 0) {
+			printk(KERN_INFO "%s: No MII transceivers found!  Assuming SYM "
+				   "transceiver.\n",
+				   dev->name);
+			tp->phys[0] = 32;
+		}
+	} else
+#endif
+		tp->phys[0] = 32;
+	tp->mii.phy_id = tp->phys[0];
+
+	/* The lower four bits are the media type. */
+	option = (board_idx >= MAX_UNITS) ? 0 : media[board_idx];
+	if (option > 0) {
+		tp->mii.full_duplex = (option & 0x210) ? 1 : 0;
+		tp->default_port = option & 0xFF;
+		if (tp->default_port)
+			tp->mii.force_media = 1;
+	}
+	if (board_idx < MAX_UNITS  &&  full_duplex[board_idx] > 0)
+		tp->mii.full_duplex = full_duplex[board_idx];
+	if (tp->mii.full_duplex) {
+		printk(KERN_INFO "%s: Media type forced to Full Duplex.\n", dev->name);
+		/* Changing the MII-advertised media because might prevent
+		   re-connection. */
+		tp->mii.force_media = 1;
+	}
+	if (tp->default_port) {
+		printk(KERN_INFO "  Forcing %dMbps %s-duplex operation.\n",
+			   (option & 0x20 ? 100 : 10),
+			   (option & 0x10 ? "full" : "half"));
+		mdio_write(dev, tp->phys[0], 0,
+				   ((option & 0x20) ? 0x2000 : 0) | 	/* 100Mbps? */
+				   ((option & 0x10) ? 0x0100 : 0)); /* Full duplex? */
+	}
+
+	/* Put the chip into low-power mode. */
+	if (rtl_chip_info[tp->chipset].flags & HasHltClk)
+		RTL_W8 (HltClk, 'H');	/* 'R' would leave the clock running. */
+
+	return 0;
+
+err_out:
+	__rtl8139_cleanup_dev (dev);
+	pci_disable_device (pdev);
+	return i;
+}
+
+
+static void __devexit rtl8139_remove_one (struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata (pdev);
+
+	assert (dev != NULL);
+
+	flush_scheduled_work();
+
+	unregister_netdev (dev);
+
+	__rtl8139_cleanup_dev (dev);
+	pci_disable_device (pdev);
+}
+
+
+/* Serial EEPROM section. */
+
+/*  EEPROM_Ctrl bits. */
+#define EE_SHIFT_CLK	0x04	/* EEPROM shift clock. */
+#define EE_CS			0x08	/* EEPROM chip select. */
+#define EE_DATA_WRITE	0x02	/* EEPROM chip data in. */
+#define EE_WRITE_0		0x00
+#define EE_WRITE_1		0x02
+#define EE_DATA_READ	0x01	/* EEPROM chip data out. */
+#define EE_ENB			(0x80 | EE_CS)
+
+/* Delay between EEPROM clock transitions.
+   No extra delay is needed with 33Mhz PCI, but 66Mhz may change this.
+ */
+
+#define eeprom_delay()	(void)RTL_R32(Cfg9346)
+
+/* The EEPROM commands include the alway-set leading bit. */
+#define EE_WRITE_CMD	(5)
+#define EE_READ_CMD		(6)
+#define EE_ERASE_CMD	(7)
+
+static int __devinit read_eeprom (void __iomem *ioaddr, int location, int addr_len)
+{
+	int i;
+	unsigned retval = 0;
+	int read_cmd = location | (EE_READ_CMD << addr_len);
+
+	RTL_W8 (Cfg9346, EE_ENB & ~EE_CS);
+	RTL_W8 (Cfg9346, EE_ENB);
+	eeprom_delay ();
+
+	/* Shift the read command bits out. */
+	for (i = 4 + addr_len; i >= 0; i--) {
+		int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
+		RTL_W8 (Cfg9346, EE_ENB | dataval);
+		eeprom_delay ();
+		RTL_W8 (Cfg9346, EE_ENB | dataval | EE_SHIFT_CLK);
+		eeprom_delay ();
+	}
+	RTL_W8 (Cfg9346, EE_ENB);
+	eeprom_delay ();
+
+	for (i = 16; i > 0; i--) {
+		RTL_W8 (Cfg9346, EE_ENB | EE_SHIFT_CLK);
+		eeprom_delay ();
+		retval =
+		    (retval << 1) | ((RTL_R8 (Cfg9346) & EE_DATA_READ) ? 1 :
+				     0);
+		RTL_W8 (Cfg9346, EE_ENB);
+		eeprom_delay ();
+	}
+
+	/* Terminate the EEPROM access. */
+	RTL_W8 (Cfg9346, ~EE_CS);
+	eeprom_delay ();
+
+	return retval;
+}
+
+/* MII serial management: mostly bogus for now. */
+/* Read and write the MII management registers using software-generated
+   serial MDIO protocol.
+   The maximum data clock rate is 2.5 Mhz.  The minimum timing is usually
+   met by back-to-back PCI I/O cycles, but we insert a delay to avoid
+   "overclocking" issues. */
+#define MDIO_DIR		0x80
+#define MDIO_DATA_OUT	0x04
+#define MDIO_DATA_IN	0x02
+#define MDIO_CLK		0x01
+#define MDIO_WRITE0 (MDIO_DIR)
+#define MDIO_WRITE1 (MDIO_DIR | MDIO_DATA_OUT)
+
+#define mdio_delay()	RTL_R8(Config4)
+
+
+static const char mii_2_8139_map[8] = {
+	BasicModeCtrl,
+	BasicModeStatus,
+	0,
+	0,
+	NWayAdvert,
+	NWayLPAR,
+	NWayExpansion,
+	0
+};
+
+
+#ifdef CONFIG_8139TOO_8129
+/* Syncronize the MII management interface by shifting 32 one bits out. */
+static void mdio_sync (void __iomem *ioaddr)
+{
+	int i;
+
+	for (i = 32; i >= 0; i--) {
+		RTL_W8 (Config4, MDIO_WRITE1);
+		mdio_delay ();
+		RTL_W8 (Config4, MDIO_WRITE1 | MDIO_CLK);
+		mdio_delay ();
+	}
+}
+#endif
+
+static int mdio_read (struct net_device *dev, int phy_id, int location)
+{
+	struct rtl8139_private *tp = netdev_priv(dev);
+	int retval = 0;
+#ifdef CONFIG_8139TOO_8129
+	void __iomem *ioaddr = tp->mmio_addr;
+	int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location;
+	int i;
+#endif
+
+	if (phy_id > 31) {	/* Really a 8139.  Use internal registers. */
+		void __iomem *ioaddr = tp->mmio_addr;
+		return location < 8 && mii_2_8139_map[location] ?
+		    RTL_R16 (mii_2_8139_map[location]) : 0;
+	}
+
+#ifdef CONFIG_8139TOO_8129
+	mdio_sync (ioaddr);
+	/* Shift the read command bits out. */
+	for (i = 15; i >= 0; i--) {
+		int dataval = (mii_cmd & (1 << i)) ? MDIO_DATA_OUT : 0;
+
+		RTL_W8 (Config4, MDIO_DIR | dataval);
+		mdio_delay ();
+		RTL_W8 (Config4, MDIO_DIR | dataval | MDIO_CLK);
+		mdio_delay ();
+	}
+
+	/* Read the two transition, 16 data, and wire-idle bits. */
+	for (i = 19; i > 0; i--) {
+		RTL_W8 (Config4, 0);
+		mdio_delay ();
+		retval = (retval << 1) | ((RTL_R8 (Config4) & MDIO_DATA_IN) ? 1 : 0);
+		RTL_W8 (Config4, MDIO_CLK);
+		mdio_delay ();
+	}
+#endif
+
+	return (retval >> 1) & 0xffff;
+}
+
+
+static void mdio_write (struct net_device *dev, int phy_id, int location,
+			int value)
+{
+	struct rtl8139_private *tp = netdev_priv(dev);
+#ifdef CONFIG_8139TOO_8129
+	void __iomem *ioaddr = tp->mmio_addr;
+	int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location << 18) | value;
+	int i;
+#endif
+
+	if (phy_id > 31) {	/* Really a 8139.  Use internal registers. */
+		void __iomem *ioaddr = tp->mmio_addr;
+		if (location == 0) {
+			RTL_W8 (Cfg9346, Cfg9346_Unlock);
+			RTL_W16 (BasicModeCtrl, value);
+			RTL_W8 (Cfg9346, Cfg9346_Lock);
+		} else if (location < 8 && mii_2_8139_map[location])
+			RTL_W16 (mii_2_8139_map[location], value);
+		return;
+	}
+
+#ifdef CONFIG_8139TOO_8129
+	mdio_sync (ioaddr);
+
+	/* Shift the command bits out. */
+	for (i = 31; i >= 0; i--) {
+		int dataval =
+		    (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
+		RTL_W8 (Config4, dataval);
+		mdio_delay ();
+		RTL_W8 (Config4, dataval | MDIO_CLK);
+		mdio_delay ();
+	}
+	/* Clear out extra bits. */
+	for (i = 2; i > 0; i--) {
+		RTL_W8 (Config4, 0);
+		mdio_delay ();
+		RTL_W8 (Config4, MDIO_CLK);
+		mdio_delay ();
+	}
+#endif
+}
+
+
+static int rtl8139_open (struct net_device *dev)
+{
+	struct rtl8139_private *tp = netdev_priv(dev);
+	int retval;
+	void __iomem *ioaddr = tp->mmio_addr;
+
+	retval = request_irq (dev->irq, rtl8139_interrupt, IRQF_SHARED, dev->name, dev);
+	if (retval)
+		return retval;
+
+	tp->tx_bufs = dma_alloc_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
+					   &tp->tx_bufs_dma, GFP_KERNEL);
+	tp->rx_ring = dma_alloc_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
+					   &tp->rx_ring_dma, GFP_KERNEL);
+	if (tp->tx_bufs == NULL || tp->rx_ring == NULL) {
+		free_irq(dev->irq, dev);
+
+		if (tp->tx_bufs)
+			dma_free_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
+					    tp->tx_bufs, tp->tx_bufs_dma);
+		if (tp->rx_ring)
+			dma_free_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
+					    tp->rx_ring, tp->rx_ring_dma);
+
+		return -ENOMEM;
+
+	}
+
+	napi_enable(&tp->napi);
+
+	tp->mii.full_duplex = tp->mii.force_media;
+	tp->tx_flag = (TX_FIFO_THRESH << 11) & 0x003f0000;
+
+	rtl8139_init_ring (dev);
+	rtl8139_hw_start (dev);
+	netif_start_queue (dev);
+
+	if (netif_msg_ifup(tp))
+		printk(KERN_DEBUG "%s: rtl8139_open() ioaddr %#llx IRQ %d"
+			" GP Pins %2.2x %s-duplex.\n", dev->name,
+			(unsigned long long)pci_resource_start (tp->pci_dev, 1),
+			dev->irq, RTL_R8 (MediaStatus),
+			tp->mii.full_duplex ? "full" : "half");
+
+	rtl8139_start_thread(tp);
+
+	return 0;
+}
+
+
+static void rtl_check_media (struct net_device *dev, unsigned int init_media)
+{
+	struct rtl8139_private *tp = netdev_priv(dev);
+
+	if (tp->phys[0] >= 0) {
+		mii_check_media(&tp->mii, netif_msg_link(tp), init_media);
+	}
+}
+
+/* Start the hardware at open or resume. */
+static void rtl8139_hw_start (struct net_device *dev)
+{
+	struct rtl8139_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	u32 i;
+	u8 tmp;
+
+	/* Bring old chips out of low-power mode. */
+	if (rtl_chip_info[tp->chipset].flags & HasHltClk)
+		RTL_W8 (HltClk, 'R');
+
+	rtl8139_chip_reset (ioaddr);
+
+	/* unlock Config[01234] and BMCR register writes */
+	RTL_W8_F (Cfg9346, Cfg9346_Unlock);
+	/* Restore our idea of the MAC address. */
+	RTL_W32_F (MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0)));
+	RTL_W32_F (MAC0 + 4, le16_to_cpu (*(__le16 *) (dev->dev_addr + 4)));
+
+	/* Must enable Tx/Rx before setting transfer thresholds! */
+	RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
+
+	tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys;
+	RTL_W32 (RxConfig, tp->rx_config);
+	RTL_W32 (TxConfig, rtl8139_tx_config);
+
+	tp->cur_rx = 0;
+
+	rtl_check_media (dev, 1);
+
+	if (tp->chipset >= CH_8139B) {
+		/* Disable magic packet scanning, which is enabled
+		 * when PM is enabled in Config1.  It can be reenabled
+		 * via ETHTOOL_SWOL if desired.  */
+		RTL_W8 (Config3, RTL_R8 (Config3) & ~Cfg3_Magic);
+	}
+
+	DPRINTK("init buffer addresses\n");
+
+	/* Lock Config[01234] and BMCR register writes */
+	RTL_W8 (Cfg9346, Cfg9346_Lock);
+
+	/* init Rx ring buffer DMA address */
+	RTL_W32_F (RxBuf, tp->rx_ring_dma);
+
+	/* init Tx buffer DMA addresses */
+	for (i = 0; i < NUM_TX_DESC; i++)
+		RTL_W32_F (TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs));
+
+	RTL_W32 (RxMissed, 0);
+
+	rtl8139_set_rx_mode (dev);
+
+	/* no early-rx interrupts */
+	RTL_W16 (MultiIntr, RTL_R16 (MultiIntr) & MultiIntrClear);
+
+	/* make sure RxTx has started */
+	tmp = RTL_R8 (ChipCmd);
+	if ((!(tmp & CmdRxEnb)) || (!(tmp & CmdTxEnb)))
+		RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
+
+	/* Enable all known interrupts by setting the interrupt mask. */
+	RTL_W16 (IntrMask, rtl8139_intr_mask);
+}
+
+
+/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
+static void rtl8139_init_ring (struct net_device *dev)
+{
+	struct rtl8139_private *tp = netdev_priv(dev);
+	int i;
+
+	tp->cur_rx = 0;
+	tp->cur_tx = 0;
+	tp->dirty_tx = 0;
+
+	for (i = 0; i < NUM_TX_DESC; i++)
+		tp->tx_buf[i] = &tp->tx_bufs[i * TX_BUF_SIZE];
+}
+
+
+/* This must be global for CONFIG_8139TOO_TUNE_TWISTER case */
+static int next_tick = 3 * HZ;
+
+#ifndef CONFIG_8139TOO_TUNE_TWISTER
+static inline void rtl8139_tune_twister (struct net_device *dev,
+				  struct rtl8139_private *tp) {}
+#else
+enum TwisterParamVals {
+	PARA78_default	= 0x78fa8388,
+	PARA7c_default	= 0xcb38de43,	/* param[0][3] */
+	PARA7c_xxx	= 0xcb38de43,
+};
+
+static const unsigned long param[4][4] = {
+	{0xcb39de43, 0xcb39ce43, 0xfb38de03, 0xcb38de43},
+	{0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
+	{0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
+	{0xbb39de43, 0xbb39ce43, 0xbb39ce83, 0xbb39ce83}
+};
+
+static void rtl8139_tune_twister (struct net_device *dev,
+				  struct rtl8139_private *tp)
+{
+	int linkcase;
+	void __iomem *ioaddr = tp->mmio_addr;
+
+	/* This is a complicated state machine to configure the "twister" for
+	   impedance/echos based on the cable length.
+	   All of this is magic and undocumented.
+	 */
+	switch (tp->twistie) {
+	case 1:
+		if (RTL_R16 (CSCR) & CSCR_LinkOKBit) {
+			/* We have link beat, let us tune the twister. */
+			RTL_W16 (CSCR, CSCR_LinkDownOffCmd);
+			tp->twistie = 2;	/* Change to state 2. */
+			next_tick = HZ / 10;
+		} else {
+			/* Just put in some reasonable defaults for when beat returns. */
+			RTL_W16 (CSCR, CSCR_LinkDownCmd);
+			RTL_W32 (FIFOTMS, 0x20);	/* Turn on cable test mode. */
+			RTL_W32 (PARA78, PARA78_default);
+			RTL_W32 (PARA7c, PARA7c_default);
+			tp->twistie = 0;	/* Bail from future actions. */
+		}
+		break;
+	case 2:
+		/* Read how long it took to hear the echo. */
+		linkcase = RTL_R16 (CSCR) & CSCR_LinkStatusBits;
+		if (linkcase == 0x7000)
+			tp->twist_row = 3;
+		else if (linkcase == 0x3000)
+			tp->twist_row = 2;
+		else if (linkcase == 0x1000)
+			tp->twist_row = 1;
+		else
+			tp->twist_row = 0;
+		tp->twist_col = 0;
+		tp->twistie = 3;	/* Change to state 2. */
+		next_tick = HZ / 10;
+		break;
+	case 3:
+		/* Put out four tuning parameters, one per 100msec. */
+		if (tp->twist_col == 0)
+			RTL_W16 (FIFOTMS, 0);
+		RTL_W32 (PARA7c, param[(int) tp->twist_row]
+			 [(int) tp->twist_col]);
+		next_tick = HZ / 10;
+		if (++tp->twist_col >= 4) {
+			/* For short cables we are done.
+			   For long cables (row == 3) check for mistune. */
+			tp->twistie =
+			    (tp->twist_row == 3) ? 4 : 0;
+		}
+		break;
+	case 4:
+		/* Special case for long cables: check for mistune. */
+		if ((RTL_R16 (CSCR) &
+		     CSCR_LinkStatusBits) == 0x7000) {
+			tp->twistie = 0;
+			break;
+		} else {
+			RTL_W32 (PARA7c, 0xfb38de03);
+			tp->twistie = 5;
+			next_tick = HZ / 10;
+		}
+		break;
+	case 5:
+		/* Retune for shorter cable (column 2). */
+		RTL_W32 (FIFOTMS, 0x20);
+		RTL_W32 (PARA78, PARA78_default);
+		RTL_W32 (PARA7c, PARA7c_default);
+		RTL_W32 (FIFOTMS, 0x00);
+		tp->twist_row = 2;
+		tp->twist_col = 0;
+		tp->twistie = 3;
+		next_tick = HZ / 10;
+		break;
+
+	default:
+		/* do nothing */
+		break;
+	}
+}
+#endif /* CONFIG_8139TOO_TUNE_TWISTER */
+
+static inline void rtl8139_thread_iter (struct net_device *dev,
+				 struct rtl8139_private *tp,
+				 void __iomem *ioaddr)
+{
+	int mii_lpa;
+
+	mii_lpa = mdio_read (dev, tp->phys[0], MII_LPA);
+
+	if (!tp->mii.force_media && mii_lpa != 0xffff) {
+		int duplex = (mii_lpa & LPA_100FULL)
+		    || (mii_lpa & 0x01C0) == 0x0040;
+		if (tp->mii.full_duplex != duplex) {
+			tp->mii.full_duplex = duplex;
+
+			if (mii_lpa) {
+				printk (KERN_INFO
+					"%s: Setting %s-duplex based on MII #%d link"
+					" partner ability of %4.4x.\n",
+					dev->name,
+					tp->mii.full_duplex ? "full" : "half",
+					tp->phys[0], mii_lpa);
+			} else {
+				printk(KERN_INFO"%s: media is unconnected, link down, or incompatible connection\n",
+				       dev->name);
+			}
+#if 0
+			RTL_W8 (Cfg9346, Cfg9346_Unlock);
+			RTL_W8 (Config1, tp->mii.full_duplex ? 0x60 : 0x20);
+			RTL_W8 (Cfg9346, Cfg9346_Lock);
+#endif
+		}
+	}
+
+	next_tick = HZ * 60;
+
+	rtl8139_tune_twister (dev, tp);
+
+	DPRINTK ("%s: Media selection tick, Link partner %4.4x.\n",
+		 dev->name, RTL_R16 (NWayLPAR));
+	DPRINTK ("%s:  Other registers are IntMask %4.4x IntStatus %4.4x\n",
+		 dev->name, RTL_R16 (IntrMask), RTL_R16 (IntrStatus));
+	DPRINTK ("%s:  Chip config %2.2x %2.2x.\n",
+		 dev->name, RTL_R8 (Config0),
+		 RTL_R8 (Config1));
+}
+
+static void rtl8139_thread (struct work_struct *work)
+{
+	struct rtl8139_private *tp =
+		container_of(work, struct rtl8139_private, thread.work);
+	struct net_device *dev = tp->mii.dev;
+	unsigned long thr_delay = next_tick;
+
+	rtnl_lock();
+
+	if (!netif_running(dev))
+		goto out_unlock;
+
+	if (tp->watchdog_fired) {
+		tp->watchdog_fired = 0;
+		rtl8139_tx_timeout_task(work);
+	} else
+		rtl8139_thread_iter(dev, tp, tp->mmio_addr);
+
+	if (tp->have_thread)
+		schedule_delayed_work(&tp->thread, thr_delay);
+out_unlock:
+	rtnl_unlock ();
+}
+
+static void rtl8139_start_thread(struct rtl8139_private *tp)
+{
+	tp->twistie = 0;
+	if (tp->chipset == CH_8139_K)
+		tp->twistie = 1;
+	else if (tp->drv_flags & HAS_LNK_CHNG)
+		return;
+
+	tp->have_thread = 1;
+	tp->watchdog_fired = 0;
+
+	schedule_delayed_work(&tp->thread, next_tick);
+}
+
+static inline void rtl8139_tx_clear (struct rtl8139_private *tp)
+{
+	tp->cur_tx = 0;
+	tp->dirty_tx = 0;
+
+	/* XXX account for unsent Tx packets in tp->stats.tx_dropped */
+}
+
+static void rtl8139_tx_timeout_task (struct work_struct *work)
+{
+	struct rtl8139_private *tp =
+		container_of(work, struct rtl8139_private, thread.work);
+	struct net_device *dev = tp->mii.dev;
+	void __iomem *ioaddr = tp->mmio_addr;
+	int i;
+	u8 tmp8;
+
+	printk (KERN_DEBUG "%s: Transmit timeout, status %2.2x %4.4x %4.4x "
+		"media %2.2x.\n", dev->name, RTL_R8 (ChipCmd),
+		RTL_R16(IntrStatus), RTL_R16(IntrMask), RTL_R8(MediaStatus));
+	/* Emit info to figure out what went wrong. */
+	printk (KERN_DEBUG "%s: Tx queue start entry %ld  dirty entry %ld.\n",
+		dev->name, tp->cur_tx, tp->dirty_tx);
+	for (i = 0; i < NUM_TX_DESC; i++)
+		printk (KERN_DEBUG "%s:  Tx descriptor %d is %8.8lx.%s\n",
+			dev->name, i, RTL_R32 (TxStatus0 + (i * 4)),
+			i == tp->dirty_tx % NUM_TX_DESC ?
+				" (queue head)" : "");
+
+	tp->xstats.tx_timeouts++;
+
+	/* disable Tx ASAP, if not already */
+	tmp8 = RTL_R8 (ChipCmd);
+	if (tmp8 & CmdTxEnb)
+		RTL_W8 (ChipCmd, CmdRxEnb);
+
+	spin_lock_bh(&tp->rx_lock);
+	/* Disable interrupts by clearing the interrupt mask. */
+	RTL_W16 (IntrMask, 0x0000);
+
+	/* Stop a shared interrupt from scavenging while we are. */
+	spin_lock_irq(&tp->lock);
+	rtl8139_tx_clear (tp);
+	spin_unlock_irq(&tp->lock);
+
+	/* ...and finally, reset everything */
+	if (netif_running(dev)) {
+		rtl8139_hw_start (dev);
+		netif_wake_queue (dev);
+	}
+	spin_unlock_bh(&tp->rx_lock);
+}
+
+static void rtl8139_tx_timeout (struct net_device *dev)
+{
+	struct rtl8139_private *tp = netdev_priv(dev);
+
+	tp->watchdog_fired = 1;
+	if (!tp->have_thread) {
+		INIT_DELAYED_WORK(&tp->thread, rtl8139_thread);
+		schedule_delayed_work(&tp->thread, next_tick);
+	}
+}
+
+static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev)
+{
+	struct rtl8139_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	unsigned int entry;
+	unsigned int len = skb->len;
+	unsigned long flags;
+
+	/* Calculate the next Tx descriptor entry. */
+	entry = tp->cur_tx % NUM_TX_DESC;
+
+	/* Note: the chip doesn't have auto-pad! */
+	if (likely(len < TX_BUF_SIZE)) {
+		if (len < ETH_ZLEN)
+			memset(tp->tx_buf[entry], 0, ETH_ZLEN);
+		skb_copy_and_csum_dev(skb, tp->tx_buf[entry]);
+		dev_kfree_skb(skb);
+	} else {
+		dev_kfree_skb(skb);
+		dev->stats.tx_dropped++;
+		return 0;
+	}
+
+	spin_lock_irqsave(&tp->lock, flags);
+	RTL_W32_F (TxStatus0 + (entry * sizeof (u32)),
+		   tp->tx_flag | max(len, (unsigned int)ETH_ZLEN));
+
+	dev->trans_start = jiffies;
+
+	tp->cur_tx++;
+	wmb();
+
+	if ((tp->cur_tx - NUM_TX_DESC) == tp->dirty_tx)
+		netif_stop_queue (dev);
+	spin_unlock_irqrestore(&tp->lock, flags);
+
+	if (netif_msg_tx_queued(tp))
+		printk (KERN_DEBUG "%s: Queued Tx packet size %u to slot %d.\n",
+			dev->name, len, entry);
+
+	return 0;
+}
+
+
+static void rtl8139_tx_interrupt (struct net_device *dev,
+				  struct rtl8139_private *tp,
+				  void __iomem *ioaddr)
+{
+	unsigned long dirty_tx, tx_left;
+
+	assert (dev != NULL);
+	assert (ioaddr != NULL);
+
+	dirty_tx = tp->dirty_tx;
+	tx_left = tp->cur_tx - dirty_tx;
+	while (tx_left > 0) {
+		int entry = dirty_tx % NUM_TX_DESC;
+		int txstatus;
+
+		txstatus = RTL_R32 (TxStatus0 + (entry * sizeof (u32)));
+
+		if (!(txstatus & (TxStatOK | TxUnderrun | TxAborted)))
+			break;	/* It still hasn't been Txed */
+
+		/* Note: TxCarrierLost is always asserted at 100mbps. */
+		if (txstatus & (TxOutOfWindow | TxAborted)) {
+			/* There was an major error, log it. */
+			if (netif_msg_tx_err(tp))
+				printk(KERN_DEBUG "%s: Transmit error, Tx status %8.8x.\n",
+					dev->name, txstatus);
+			dev->stats.tx_errors++;
+			if (txstatus & TxAborted) {
+				dev->stats.tx_aborted_errors++;
+				RTL_W32 (TxConfig, TxClearAbt);
+				RTL_W16 (IntrStatus, TxErr);
+				wmb();
+			}
+			if (txstatus & TxCarrierLost)
+				dev->stats.tx_carrier_errors++;
+			if (txstatus & TxOutOfWindow)
+				dev->stats.tx_window_errors++;
+		} else {
+			if (txstatus & TxUnderrun) {
+				/* Add 64 to the Tx FIFO threshold. */
+				if (tp->tx_flag < 0x00300000)
+					tp->tx_flag += 0x00020000;
+				dev->stats.tx_fifo_errors++;
+			}
+			dev->stats.collisions += (txstatus >> 24) & 15;
+			dev->stats.tx_bytes += txstatus & 0x7ff;
+			dev->stats.tx_packets++;
+		}
+
+		dirty_tx++;
+		tx_left--;
+	}
+
+#ifndef RTL8139_NDEBUG
+	if (tp->cur_tx - dirty_tx > NUM_TX_DESC) {
+		printk (KERN_ERR "%s: Out-of-sync dirty pointer, %ld vs. %ld.\n",
+		        dev->name, dirty_tx, tp->cur_tx);
+		dirty_tx += NUM_TX_DESC;
+	}
+#endif /* RTL8139_NDEBUG */
+
+	/* only wake the queue if we did work, and the queue is stopped */
+	if (tp->dirty_tx != dirty_tx) {
+		tp->dirty_tx = dirty_tx;
+		mb();
+		netif_wake_queue (dev);
+	}
+}
+
+
+/* TODO: clean this up!  Rx reset need not be this intensive */
+static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
+			    struct rtl8139_private *tp, void __iomem *ioaddr)
+{
+	u8 tmp8;
+#ifdef CONFIG_8139_OLD_RX_RESET
+	int tmp_work;
+#endif
+
+	if (netif_msg_rx_err (tp))
+		printk(KERN_DEBUG "%s: Ethernet frame had errors, status %8.8x.\n",
+			dev->name, rx_status);
+	dev->stats.rx_errors++;
+	if (!(rx_status & RxStatusOK)) {
+		if (rx_status & RxTooLong) {
+			DPRINTK ("%s: Oversized Ethernet frame, status %4.4x!\n",
+			 	dev->name, rx_status);
+			/* A.C.: The chip hangs here. */
+		}
+		if (rx_status & (RxBadSymbol | RxBadAlign))
+			dev->stats.rx_frame_errors++;
+		if (rx_status & (RxRunt | RxTooLong))
+			dev->stats.rx_length_errors++;
+		if (rx_status & RxCRCErr)
+			dev->stats.rx_crc_errors++;
+	} else {
+		tp->xstats.rx_lost_in_ring++;
+	}
+
+#ifndef CONFIG_8139_OLD_RX_RESET
+	tmp8 = RTL_R8 (ChipCmd);
+	RTL_W8 (ChipCmd, tmp8 & ~CmdRxEnb);
+	RTL_W8 (ChipCmd, tmp8);
+	RTL_W32 (RxConfig, tp->rx_config);
+	tp->cur_rx = 0;
+#else
+	/* Reset the receiver, based on RealTek recommendation. (Bug?) */
+
+	/* disable receive */
+	RTL_W8_F (ChipCmd, CmdTxEnb);
+	tmp_work = 200;
+	while (--tmp_work > 0) {
+		udelay(1);
+		tmp8 = RTL_R8 (ChipCmd);
+		if (!(tmp8 & CmdRxEnb))
+			break;
+	}
+	if (tmp_work <= 0)
+		printk (KERN_WARNING PFX "rx stop wait too long\n");
+	/* restart receive */
+	tmp_work = 200;
+	while (--tmp_work > 0) {
+		RTL_W8_F (ChipCmd, CmdRxEnb | CmdTxEnb);
+		udelay(1);
+		tmp8 = RTL_R8 (ChipCmd);
+		if ((tmp8 & CmdRxEnb) && (tmp8 & CmdTxEnb))
+			break;
+	}
+	if (tmp_work <= 0)
+		printk (KERN_WARNING PFX "tx/rx enable wait too long\n");
+
+	/* and reinitialize all rx related registers */
+	RTL_W8_F (Cfg9346, Cfg9346_Unlock);
+	/* Must enable Tx/Rx before setting transfer thresholds! */
+	RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
+
+	tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys;
+	RTL_W32 (RxConfig, tp->rx_config);
+	tp->cur_rx = 0;
+
+	DPRINTK("init buffer addresses\n");
+
+	/* Lock Config[01234] and BMCR register writes */
+	RTL_W8 (Cfg9346, Cfg9346_Lock);
+
+	/* init Rx ring buffer DMA address */
+	RTL_W32_F (RxBuf, tp->rx_ring_dma);
+
+	/* A.C.: Reset the multicast list. */
+	__set_rx_mode (dev);
+#endif
+}
+
+#if RX_BUF_IDX == 3
+static inline void wrap_copy(struct sk_buff *skb, const unsigned char *ring,
+				 u32 offset, unsigned int size)
+{
+	u32 left = RX_BUF_LEN - offset;
+
+	if (size > left) {
+		skb_copy_to_linear_data(skb, ring + offset, left);
+		skb_copy_to_linear_data_offset(skb, left, ring, size - left);
+	} else
+		skb_copy_to_linear_data(skb, ring + offset, size);
+}
+#endif
+
+static void rtl8139_isr_ack(struct rtl8139_private *tp)
+{
+	void __iomem *ioaddr = tp->mmio_addr;
+	u16 status;
+
+	status = RTL_R16 (IntrStatus) & RxAckBits;
+
+	/* Clear out errors and receive interrupts */
+	if (likely(status != 0)) {
+		if (unlikely(status & (RxFIFOOver | RxOverflow))) {
+			tp->dev->stats.rx_errors++;
+			if (status & RxFIFOOver)
+				tp->dev->stats.rx_fifo_errors++;
+		}
+		RTL_W16_F (IntrStatus, RxAckBits);
+	}
+}
+
+static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
+		      int budget)
+{
+	void __iomem *ioaddr = tp->mmio_addr;
+	int received = 0;
+	unsigned char *rx_ring = tp->rx_ring;
+	unsigned int cur_rx = tp->cur_rx;
+	unsigned int rx_size = 0;
+
+	DPRINTK ("%s: In rtl8139_rx(), current %4.4x BufAddr %4.4x,"
+		 " free to %4.4x, Cmd %2.2x.\n", dev->name, (u16)cur_rx,
+		 RTL_R16 (RxBufAddr),
+		 RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
+
+	while (netif_running(dev) && received < budget
+	       && (RTL_R8 (ChipCmd) & RxBufEmpty) == 0) {
+		u32 ring_offset = cur_rx % RX_BUF_LEN;
+		u32 rx_status;
+		unsigned int pkt_size;
+		struct sk_buff *skb;
+
+		rmb();
+
+		/* read size+status of next frame from DMA ring buffer */
+		rx_status = le32_to_cpu (*(__le32 *) (rx_ring + ring_offset));
+		rx_size = rx_status >> 16;
+		pkt_size = rx_size - 4;
+
+		if (netif_msg_rx_status(tp))
+			printk(KERN_DEBUG "%s:  rtl8139_rx() status %4.4x, size %4.4x,"
+				" cur %4.4x.\n", dev->name, rx_status,
+			 rx_size, cur_rx);
+#if RTL8139_DEBUG > 2
+		{
+			int i;
+			DPRINTK ("%s: Frame contents ", dev->name);
+			for (i = 0; i < 70; i++)
+				printk (" %2.2x",
+					rx_ring[ring_offset + i]);
+			printk (".\n");
+		}
+#endif
+
+		/* Packet copy from FIFO still in progress.
+		 * Theoretically, this should never happen
+		 * since EarlyRx is disabled.
+		 */
+		if (unlikely(rx_size == 0xfff0)) {
+			if (!tp->fifo_copy_timeout)
+				tp->fifo_copy_timeout = jiffies + 2;
+			else if (time_after(jiffies, tp->fifo_copy_timeout)) {
+				DPRINTK ("%s: hung FIFO. Reset.", dev->name);
+				rx_size = 0;
+				goto no_early_rx;
+			}
+			if (netif_msg_intr(tp)) {
+				printk(KERN_DEBUG "%s: fifo copy in progress.",
+				       dev->name);
+			}
+			tp->xstats.early_rx++;
+			break;
+		}
+
+no_early_rx:
+		tp->fifo_copy_timeout = 0;
+
+		/* If Rx err or invalid rx_size/rx_status received
+		 * (which happens if we get lost in the ring),
+		 * Rx process gets reset, so we abort any further
+		 * Rx processing.
+		 */
+		if (unlikely((rx_size > (MAX_ETH_FRAME_SIZE+4)) ||
+			     (rx_size < 8) ||
+			     (!(rx_status & RxStatusOK)))) {
+			rtl8139_rx_err (rx_status, dev, tp, ioaddr);
+			received = -1;
+			goto out;
+		}
+
+		/* Malloc up new buffer, compatible with net-2e. */
+		/* Omit the four octet CRC from the length. */
+
+		skb = dev_alloc_skb (pkt_size + 2);
+		if (likely(skb)) {
+			skb_reserve (skb, 2);	/* 16 byte align the IP fields. */
+#if RX_BUF_IDX == 3
+			wrap_copy(skb, rx_ring, ring_offset+4, pkt_size);
+#else
+			skb_copy_to_linear_data (skb, &rx_ring[ring_offset + 4], pkt_size);
+#endif
+			skb_put (skb, pkt_size);
+
+			skb->protocol = eth_type_trans (skb, dev);
+
+			dev->last_rx = jiffies;
+			dev->stats.rx_bytes += pkt_size;
+			dev->stats.rx_packets++;
+
+			netif_receive_skb (skb);
+		} else {
+			if (net_ratelimit())
+				printk (KERN_WARNING
+					"%s: Memory squeeze, dropping packet.\n",
+					dev->name);
+			dev->stats.rx_dropped++;
+		}
+		received++;
+
+		cur_rx = (cur_rx + rx_size + 4 + 3) & ~3;
+		RTL_W16 (RxBufPtr, (u16) (cur_rx - 16));
+
+		rtl8139_isr_ack(tp);
+	}
+
+	if (unlikely(!received || rx_size == 0xfff0))
+		rtl8139_isr_ack(tp);
+
+#if RTL8139_DEBUG > 1
+	DPRINTK ("%s: Done rtl8139_rx(), current %4.4x BufAddr %4.4x,"
+		 " free to %4.4x, Cmd %2.2x.\n", dev->name, cur_rx,
+		 RTL_R16 (RxBufAddr),
+		 RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
+#endif
+
+	tp->cur_rx = cur_rx;
+
+	/*
+	 * The receive buffer should be mostly empty.
+	 * Tell NAPI to reenable the Rx irq.
+	 */
+	if (tp->fifo_copy_timeout)
+		received = budget;
+
+out:
+	return received;
+}
+
+
+static void rtl8139_weird_interrupt (struct net_device *dev,
+				     struct rtl8139_private *tp,
+				     void __iomem *ioaddr,
+				     int status, int link_changed)
+{
+	DPRINTK ("%s: Abnormal interrupt, status %8.8x.\n",
+		 dev->name, status);
+
+	assert (dev != NULL);
+	assert (tp != NULL);
+	assert (ioaddr != NULL);
+
+	/* Update the error count. */
+	dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+	RTL_W32 (RxMissed, 0);
+
+	if ((status & RxUnderrun) && link_changed &&
+	    (tp->drv_flags & HAS_LNK_CHNG)) {
+		rtl_check_media(dev, 0);
+		status &= ~RxUnderrun;
+	}
+
+	if (status & (RxUnderrun | RxErr))
+		dev->stats.rx_errors++;
+
+	if (status & PCSTimeout)
+		dev->stats.rx_length_errors++;
+	if (status & RxUnderrun)
+		dev->stats.rx_fifo_errors++;
+	if (status & PCIErr) {
+		u16 pci_cmd_status;
+		pci_read_config_word (tp->pci_dev, PCI_STATUS, &pci_cmd_status);
+		pci_write_config_word (tp->pci_dev, PCI_STATUS, pci_cmd_status);
+
+		printk (KERN_ERR "%s: PCI Bus error %4.4x.\n",
+			dev->name, pci_cmd_status);
+	}
+}
+
+static int rtl8139_poll(struct napi_struct *napi, int budget)
+{
+	struct rtl8139_private *tp = container_of(napi, struct rtl8139_private, napi);
+	struct net_device *dev = tp->dev;
+	void __iomem *ioaddr = tp->mmio_addr;
+	int work_done;
+
+	spin_lock(&tp->rx_lock);
+	work_done = 0;
+	if (likely(RTL_R16(IntrStatus) & RxAckBits))
+		work_done += rtl8139_rx(dev, tp, budget);
+
+	if (work_done < budget) {
+		unsigned long flags;
+		/*
+		 * Order is important since data can get interrupted
+		 * again when we think we are done.
+		 */
+		spin_lock_irqsave(&tp->lock, flags);
+		RTL_W16_F(IntrMask, rtl8139_intr_mask);
+		__netif_rx_complete(dev, napi);
+		spin_unlock_irqrestore(&tp->lock, flags);
+	}
+	spin_unlock(&tp->rx_lock);
+
+	return work_done;
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+   after the Tx thread. */
+static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance)
+{
+	struct net_device *dev = (struct net_device *) dev_instance;
+	struct rtl8139_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	u16 status, ackstat;
+	int link_changed = 0; /* avoid bogus "uninit" warning */
+	int handled = 0;
+
+	spin_lock (&tp->lock);
+	status = RTL_R16 (IntrStatus);
+
+	/* shared irq? */
+	if (unlikely((status & rtl8139_intr_mask) == 0))
+		goto out;
+
+	handled = 1;
+
+	/* h/w no longer present (hotplug?) or major error, bail */
+	if (unlikely(status == 0xFFFF))
+		goto out;
+
+	/* close possible race's with dev_close */
+	if (unlikely(!netif_running(dev))) {
+		RTL_W16 (IntrMask, 0);
+		goto out;
+	}
+
+	/* Acknowledge all of the current interrupt sources ASAP, but
+	   an first get an additional status bit from CSCR. */
+	if (unlikely(status & RxUnderrun))
+		link_changed = RTL_R16 (CSCR) & CSCR_LinkChangeBit;
+
+	ackstat = status & ~(RxAckBits | TxErr);
+	if (ackstat)
+		RTL_W16 (IntrStatus, ackstat);
+
+	/* Receive packets are processed by poll routine.
+	   If not running start it now. */
+	if (status & RxAckBits){
+		if (netif_rx_schedule_prep(dev, &tp->napi)) {
+			RTL_W16_F (IntrMask, rtl8139_norx_intr_mask);
+			__netif_rx_schedule(dev, &tp->napi);
+		}
+	}
+
+	/* Check uncommon events with one test. */
+	if (unlikely(status & (PCIErr | PCSTimeout | RxUnderrun | RxErr)))
+		rtl8139_weird_interrupt (dev, tp, ioaddr,
+					 status, link_changed);
+
+	if (status & (TxOK | TxErr)) {
+		rtl8139_tx_interrupt (dev, tp, ioaddr);
+		if (status & TxErr)
+			RTL_W16 (IntrStatus, TxErr);
+	}
+ out:
+	spin_unlock (&tp->lock);
+
+	DPRINTK ("%s: exiting interrupt, intr_status=%#4.4x.\n",
+		 dev->name, RTL_R16 (IntrStatus));
+	return IRQ_RETVAL(handled);
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling receive - used by netconsole and other diagnostic tools
+ * to allow network i/o with interrupts disabled.
+ */
+static void rtl8139_poll_controller(struct net_device *dev)
+{
+	disable_irq(dev->irq);
+	rtl8139_interrupt(dev->irq, dev);
+	enable_irq(dev->irq);
+}
+#endif
+
+static int rtl8139_close (struct net_device *dev)
+{
+	struct rtl8139_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	unsigned long flags;
+
+	netif_stop_queue(dev);
+	napi_disable(&tp->napi);
+
+	if (netif_msg_ifdown(tp))
+		printk(KERN_DEBUG "%s: Shutting down ethercard, status was 0x%4.4x.\n",
+			dev->name, RTL_R16 (IntrStatus));
+
+	spin_lock_irqsave (&tp->lock, flags);
+
+	/* Stop the chip's Tx and Rx DMA processes. */
+	RTL_W8 (ChipCmd, 0);
+
+	/* Disable interrupts by clearing the interrupt mask. */
+	RTL_W16 (IntrMask, 0);
+
+	/* Update the error counts. */
+	dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+	RTL_W32 (RxMissed, 0);
+
+	spin_unlock_irqrestore (&tp->lock, flags);
+
+	free_irq (dev->irq, dev);
+
+	rtl8139_tx_clear (tp);
+
+	dma_free_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
+			  tp->rx_ring, tp->rx_ring_dma);
+	dma_free_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
+			  tp->tx_bufs, tp->tx_bufs_dma);
+	tp->rx_ring = NULL;
+	tp->tx_bufs = NULL;
+
+	/* Green! Put the chip in low-power mode. */
+	RTL_W8 (Cfg9346, Cfg9346_Unlock);
+
+	if (rtl_chip_info[tp->chipset].flags & HasHltClk)
+		RTL_W8 (HltClk, 'H');	/* 'R' would leave the clock running. */
+
+	return 0;
+}
+
+
+/* Get the ethtool Wake-on-LAN settings.  Assumes that wol points to
+   kernel memory, *wol has been initialized as {ETHTOOL_GWOL}, and
+   other threads or interrupts aren't messing with the 8139.  */
+static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct rtl8139_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = np->mmio_addr;
+
+	spin_lock_irq(&np->lock);
+	if (rtl_chip_info[np->chipset].flags & HasLWake) {
+		u8 cfg3 = RTL_R8 (Config3);
+		u8 cfg5 = RTL_R8 (Config5);
+
+		wol->supported = WAKE_PHY | WAKE_MAGIC
+			| WAKE_UCAST | WAKE_MCAST | WAKE_BCAST;
+
+		wol->wolopts = 0;
+		if (cfg3 & Cfg3_LinkUp)
+			wol->wolopts |= WAKE_PHY;
+		if (cfg3 & Cfg3_Magic)
+			wol->wolopts |= WAKE_MAGIC;
+		/* (KON)FIXME: See how netdev_set_wol() handles the
+		   following constants.  */
+		if (cfg5 & Cfg5_UWF)
+			wol->wolopts |= WAKE_UCAST;
+		if (cfg5 & Cfg5_MWF)
+			wol->wolopts |= WAKE_MCAST;
+		if (cfg5 & Cfg5_BWF)
+			wol->wolopts |= WAKE_BCAST;
+	}
+	spin_unlock_irq(&np->lock);
+}
+
+
+/* Set the ethtool Wake-on-LAN settings.  Return 0 or -errno.  Assumes
+   that wol points to kernel memory and other threads or interrupts
+   aren't messing with the 8139.  */
+static int rtl8139_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct rtl8139_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = np->mmio_addr;
+	u32 support;
+	u8 cfg3, cfg5;
+
+	support = ((rtl_chip_info[np->chipset].flags & HasLWake)
+		   ? (WAKE_PHY | WAKE_MAGIC
+		      | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST)
+		   : 0);
+	if (wol->wolopts & ~support)
+		return -EINVAL;
+
+	spin_lock_irq(&np->lock);
+	cfg3 = RTL_R8 (Config3) & ~(Cfg3_LinkUp | Cfg3_Magic);
+	if (wol->wolopts & WAKE_PHY)
+		cfg3 |= Cfg3_LinkUp;
+	if (wol->wolopts & WAKE_MAGIC)
+		cfg3 |= Cfg3_Magic;
+	RTL_W8 (Cfg9346, Cfg9346_Unlock);
+	RTL_W8 (Config3, cfg3);
+	RTL_W8 (Cfg9346, Cfg9346_Lock);
+
+	cfg5 = RTL_R8 (Config5) & ~(Cfg5_UWF | Cfg5_MWF | Cfg5_BWF);
+	/* (KON)FIXME: These are untested.  We may have to set the
+	   CRC0, Wakeup0 and LSBCRC0 registers too, but I have no
+	   documentation.  */
+	if (wol->wolopts & WAKE_UCAST)
+		cfg5 |= Cfg5_UWF;
+	if (wol->wolopts & WAKE_MCAST)
+		cfg5 |= Cfg5_MWF;
+	if (wol->wolopts & WAKE_BCAST)
+		cfg5 |= Cfg5_BWF;
+	RTL_W8 (Config5, cfg5);	/* need not unlock via Cfg9346 */
+	spin_unlock_irq(&np->lock);
+
+	return 0;
+}
+
+static void rtl8139_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+	struct rtl8139_private *np = netdev_priv(dev);
+	strcpy(info->driver, DRV_NAME);
+	strcpy(info->version, DRV_VERSION);
+	strcpy(info->bus_info, pci_name(np->pci_dev));
+	info->regdump_len = np->regs_len;
+}
+
+static int rtl8139_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct rtl8139_private *np = netdev_priv(dev);
+	spin_lock_irq(&np->lock);
+	mii_ethtool_gset(&np->mii, cmd);
+	spin_unlock_irq(&np->lock);
+	return 0;
+}
+
+static int rtl8139_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct rtl8139_private *np = netdev_priv(dev);
+	int rc;
+	spin_lock_irq(&np->lock);
+	rc = mii_ethtool_sset(&np->mii, cmd);
+	spin_unlock_irq(&np->lock);
+	return rc;
+}
+
+static int rtl8139_nway_reset(struct net_device *dev)
+{
+	struct rtl8139_private *np = netdev_priv(dev);
+	return mii_nway_restart(&np->mii);
+}
+
+static u32 rtl8139_get_link(struct net_device *dev)
+{
+	struct rtl8139_private *np = netdev_priv(dev);
+	return mii_link_ok(&np->mii);
+}
+
+static u32 rtl8139_get_msglevel(struct net_device *dev)
+{
+	struct rtl8139_private *np = netdev_priv(dev);
+	return np->msg_enable;
+}
+
+static void rtl8139_set_msglevel(struct net_device *dev, u32 datum)
+{
+	struct rtl8139_private *np = netdev_priv(dev);
+	np->msg_enable = datum;
+}
+
+static int rtl8139_get_regs_len(struct net_device *dev)
+{
+	struct rtl8139_private *np;
+	/* TODO: we are too slack to do reg dumping for pio, for now */
+	if (use_io)
+		return 0;
+	np = netdev_priv(dev);
+	return np->regs_len;
+}
+
+static void rtl8139_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf)
+{
+	struct rtl8139_private *np;
+
+	/* TODO: we are too slack to do reg dumping for pio, for now */
+	if (use_io)
+		return;
+	np = netdev_priv(dev);
+
+	regs->version = RTL_REGS_VER;
+
+	spin_lock_irq(&np->lock);
+	memcpy_fromio(regbuf, np->mmio_addr, regs->len);
+	spin_unlock_irq(&np->lock);
+}
+
+static int rtl8139_get_sset_count(struct net_device *dev, int sset)
+{
+	switch (sset) {
+	case ETH_SS_STATS:
+		return RTL_NUM_STATS;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static void rtl8139_get_ethtool_stats(struct net_device *dev, struct ethtool_stats *stats, u64 *data)
+{
+	struct rtl8139_private *np = netdev_priv(dev);
+
+	data[0] = np->xstats.early_rx;
+	data[1] = np->xstats.tx_buf_mapped;
+	data[2] = np->xstats.tx_timeouts;
+	data[3] = np->xstats.rx_lost_in_ring;
+}
+
+static void rtl8139_get_strings(struct net_device *dev, u32 stringset, u8 *data)
+{
+	memcpy(data, ethtool_stats_keys, sizeof(ethtool_stats_keys));
+}
+
+static const struct ethtool_ops rtl8139_ethtool_ops = {
+	.get_drvinfo		= rtl8139_get_drvinfo,
+	.get_settings		= rtl8139_get_settings,
+	.set_settings		= rtl8139_set_settings,
+	.get_regs_len		= rtl8139_get_regs_len,
+	.get_regs		= rtl8139_get_regs,
+	.nway_reset		= rtl8139_nway_reset,
+	.get_link		= rtl8139_get_link,
+	.get_msglevel		= rtl8139_get_msglevel,
+	.set_msglevel		= rtl8139_set_msglevel,
+	.get_wol		= rtl8139_get_wol,
+	.set_wol		= rtl8139_set_wol,
+	.get_strings		= rtl8139_get_strings,
+	.get_sset_count		= rtl8139_get_sset_count,
+	.get_ethtool_stats	= rtl8139_get_ethtool_stats,
+};
+
+static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct rtl8139_private *np = netdev_priv(dev);
+	int rc;
+
+	if (!netif_running(dev))
+		return -EINVAL;
+
+	spin_lock_irq(&np->lock);
+	rc = generic_mii_ioctl(&np->mii, if_mii(rq), cmd, NULL);
+	spin_unlock_irq(&np->lock);
+
+	return rc;
+}
+
+
+static struct net_device_stats *rtl8139_get_stats (struct net_device *dev)
+{
+	struct rtl8139_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	unsigned long flags;
+
+	if (netif_running(dev)) {
+		spin_lock_irqsave (&tp->lock, flags);
+		dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+		RTL_W32 (RxMissed, 0);
+		spin_unlock_irqrestore (&tp->lock, flags);
+	}
+
+	return &dev->stats;
+}
+
+/* Set or clear the multicast filter for this adaptor.
+   This routine is not state sensitive and need not be SMP locked. */
+
+static void __set_rx_mode (struct net_device *dev)
+{
+	struct rtl8139_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	u32 mc_filter[2];	/* Multicast hash filter */
+	int i, rx_mode;
+	u32 tmp;
+
+	DPRINTK ("%s:   rtl8139_set_rx_mode(%4.4x) done -- Rx config %8.8lx.\n",
+			dev->name, dev->flags, RTL_R32 (RxConfig));
+
+	/* Note: do not reorder, GCC is clever about common statements. */
+	if (dev->flags & IFF_PROMISC) {
+		rx_mode =
+		    AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
+		    AcceptAllPhys;
+		mc_filter[1] = mc_filter[0] = 0xffffffff;
+	} else if ((dev->mc_count > multicast_filter_limit)
+		   || (dev->flags & IFF_ALLMULTI)) {
+		/* Too many to filter perfectly -- accept all multicasts. */
+		rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
+		mc_filter[1] = mc_filter[0] = 0xffffffff;
+	} else {
+		struct dev_mc_list *mclist;
+		rx_mode = AcceptBroadcast | AcceptMyPhys;
+		mc_filter[1] = mc_filter[0] = 0;
+		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+		     i++, mclist = mclist->next) {
+			int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
+
+			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+			rx_mode |= AcceptMulticast;
+		}
+	}
+
+	/* We can safely update without stopping the chip. */
+	tmp = rtl8139_rx_config | rx_mode;
+	if (tp->rx_config != tmp) {
+		RTL_W32_F (RxConfig, tmp);
+		tp->rx_config = tmp;
+	}
+	RTL_W32_F (MAR0 + 0, mc_filter[0]);
+	RTL_W32_F (MAR0 + 4, mc_filter[1]);
+}
+
+static void rtl8139_set_rx_mode (struct net_device *dev)
+{
+	unsigned long flags;
+	struct rtl8139_private *tp = netdev_priv(dev);
+
+	spin_lock_irqsave (&tp->lock, flags);
+	__set_rx_mode(dev);
+	spin_unlock_irqrestore (&tp->lock, flags);
+}
+
+#ifdef CONFIG_PM
+
+static int rtl8139_suspend (struct pci_dev *pdev, pm_message_t state)
+{
+	struct net_device *dev = pci_get_drvdata (pdev);
+	struct rtl8139_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	unsigned long flags;
+
+	pci_save_state (pdev);
+
+	if (!netif_running (dev))
+		return 0;
+
+	netif_device_detach (dev);
+
+	spin_lock_irqsave (&tp->lock, flags);
+
+	/* Disable interrupts, stop Tx and Rx. */
+	RTL_W16 (IntrMask, 0);
+	RTL_W8 (ChipCmd, 0);
+
+	/* Update the error counts. */
+	dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+	RTL_W32 (RxMissed, 0);
+
+	spin_unlock_irqrestore (&tp->lock, flags);
+
+	pci_set_power_state (pdev, PCI_D3hot);
+
+	return 0;
+}
+
+
+static int rtl8139_resume (struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata (pdev);
+
+	pci_restore_state (pdev);
+	if (!netif_running (dev))
+		return 0;
+	pci_set_power_state (pdev, PCI_D0);
+	rtl8139_init_ring (dev);
+	rtl8139_hw_start (dev);
+	netif_device_attach (dev);
+	return 0;
+}
+
+#endif /* CONFIG_PM */
+
+
+static struct pci_driver rtl8139_pci_driver = {
+	.name		= DRV_NAME,
+	.id_table	= rtl8139_pci_tbl,
+	.probe		= rtl8139_init_one,
+	.remove		= __devexit_p(rtl8139_remove_one),
+#ifdef CONFIG_PM
+	.suspend	= rtl8139_suspend,
+	.resume		= rtl8139_resume,
+#endif /* CONFIG_PM */
+};
+
+
+static int __init rtl8139_init_module (void)
+{
+	/* when we're a module, we always print a version message,
+	 * even if no 8139 board is found.
+	 */
+#ifdef MODULE
+	printk (KERN_INFO RTL8139_DRIVER_NAME "\n");
+#endif
+
+	return pci_register_driver(&rtl8139_pci_driver);
+}
+
+
+static void __exit rtl8139_cleanup_module (void)
+{
+	pci_unregister_driver (&rtl8139_pci_driver);
+}
+
+
+module_init(rtl8139_init_module);
+module_exit(rtl8139_cleanup_module);
diff -r 61793d845ad6 -r 0625902b3904 devices/Makefile.am
--- a/devices/Makefile.am	Mon Mar 09 09:08:09 2009 +0000
+++ b/devices/Makefile.am	Mon Mar 09 09:10:05 2009 +0000
@@ -51,6 +51,8 @@
 	8139too-2.6.25-orig.c \
 	8139too-2.6.26-ethercat.c \
 	8139too-2.6.26-orig.c \
+	8139too-2.6.27-ethercat.c \
+	8139too-2.6.27-orig.c \
 	e100-2.6.20-ethercat.c \
 	e100-2.6.20-orig.c \
 	e100-2.6.24-ethercat.c \