diff -r aa0f6f939cb3 -r ca345abf0565 devices/e1000e/netdev-2.6.35-ethercat.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/devices/e1000e/netdev-2.6.35-ethercat.c Tue Apr 10 19:10:56 2012 +0200 @@ -0,0 +1,6120 @@ +/******************************************************************************* + + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2009 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS + e1000-devel Mailing List + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "e1000-2.6.35-ethercat.h" + +#define DRV_VERSION "1.0.2-k4 (EtherCAT)" +char e1000e_driver_name[] = "ec_e1000e"; +const char e1000e_driver_version[] = DRV_VERSION; + +static const struct e1000_info *e1000_info_tbl[] = { + [board_82571] = &e1000_82571_info, + [board_82572] = &e1000_82572_info, + [board_82573] = &e1000_82573_info, + [board_82574] = &e1000_82574_info, + [board_82583] = &e1000_82583_info, + [board_80003es2lan] = &e1000_es2_info, + [board_ich8lan] = &e1000_ich8_info, + [board_ich9lan] = &e1000_ich9_info, + [board_ich10lan] = &e1000_ich10_info, + [board_pchlan] = &e1000_pch_info, +}; + +struct e1000_reg_info { + u32 ofs; + char *name; +}; + +#define E1000_RDFH 0x02410 /* Rx Data FIFO Head - RW */ +#define E1000_RDFT 0x02418 /* Rx Data FIFO Tail - RW */ +#define E1000_RDFHS 0x02420 /* Rx Data FIFO Head Saved - RW */ +#define E1000_RDFTS 0x02428 /* Rx Data FIFO Tail Saved - RW */ +#define E1000_RDFPC 0x02430 /* Rx Data FIFO Packet Count - RW */ + +#define E1000_TDFH 0x03410 /* Tx Data FIFO Head - RW */ +#define E1000_TDFT 0x03418 /* Tx Data FIFO Tail - RW */ +#define E1000_TDFHS 0x03420 /* Tx Data FIFO Head Saved - RW */ +#define E1000_TDFTS 0x03428 /* Tx Data FIFO Tail Saved - RW */ +#define E1000_TDFPC 0x03430 /* Tx Data FIFO Packet Count - RW */ + +static const struct e1000_reg_info e1000_reg_info_tbl[] = { + + /* General Registers */ + {E1000_CTRL, "CTRL"}, + {E1000_STATUS, "STATUS"}, + {E1000_CTRL_EXT, "CTRL_EXT"}, + + /* Interrupt Registers */ + {E1000_ICR, "ICR"}, + + /* RX Registers */ + {E1000_RCTL, "RCTL"}, + {E1000_RDLEN, "RDLEN"}, + {E1000_RDH, "RDH"}, + {E1000_RDT, "RDT"}, + {E1000_RDTR, "RDTR"}, + {E1000_RXDCTL(0), "RXDCTL"}, + {E1000_ERT, "ERT"}, + {E1000_RDBAL, "RDBAL"}, + {E1000_RDBAH, "RDBAH"}, + {E1000_RDFH, "RDFH"}, + {E1000_RDFT, "RDFT"}, + {E1000_RDFHS, "RDFHS"}, + {E1000_RDFTS, "RDFTS"}, + {E1000_RDFPC, "RDFPC"}, + + /* TX Registers */ + {E1000_TCTL, "TCTL"}, + {E1000_TDBAL, "TDBAL"}, + {E1000_TDBAH, "TDBAH"}, + {E1000_TDLEN, "TDLEN"}, + {E1000_TDH, "TDH"}, + {E1000_TDT, "TDT"}, + {E1000_TIDV, "TIDV"}, + {E1000_TXDCTL(0), "TXDCTL"}, + {E1000_TADV, "TADV"}, + {E1000_TARC(0), "TARC"}, + {E1000_TDFH, "TDFH"}, + {E1000_TDFT, "TDFT"}, + {E1000_TDFHS, "TDFHS"}, + {E1000_TDFTS, "TDFTS"}, + {E1000_TDFPC, "TDFPC"}, + + /* List Terminator */ + {} +}; + +/* + * e1000_regdump - register printout routine + */ +static void e1000_regdump(struct e1000_hw *hw, struct e1000_reg_info *reginfo) +{ + int n = 0; + char rname[16]; + u32 regs[8]; + + switch (reginfo->ofs) { + case E1000_RXDCTL(0): + for (n = 0; n < 2; n++) + regs[n] = __er32(hw, E1000_RXDCTL(n)); + break; + case E1000_TXDCTL(0): + for (n = 0; n < 2; n++) + regs[n] = __er32(hw, E1000_TXDCTL(n)); + break; + case E1000_TARC(0): + for (n = 0; n < 2; n++) + regs[n] = __er32(hw, E1000_TARC(n)); + break; + default: + printk(KERN_INFO "%-15s %08x\n", + reginfo->name, __er32(hw, reginfo->ofs)); + return; + } + + snprintf(rname, 16, "%s%s", reginfo->name, "[0-1]"); + printk(KERN_INFO "%-15s ", rname); + for (n = 0; n < 2; n++) + printk(KERN_CONT "%08x ", regs[n]); + printk(KERN_CONT "\n"); +} + + +/* + * e1000e_dump - Print registers, tx-ring and rx-ring + */ +static void e1000e_dump(struct e1000_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct e1000_hw *hw = &adapter->hw; + struct e1000_reg_info *reginfo; + struct e1000_ring *tx_ring = adapter->tx_ring; + struct e1000_tx_desc *tx_desc; + struct my_u0 { u64 a; u64 b; } *u0; + struct e1000_buffer *buffer_info; + struct e1000_ring *rx_ring = adapter->rx_ring; + union e1000_rx_desc_packet_split *rx_desc_ps; + struct e1000_rx_desc *rx_desc; + struct my_u1 { u64 a; u64 b; u64 c; u64 d; } *u1; + u32 staterr; + int i = 0; + + if (!netif_msg_hw(adapter)) + return; + + /* Print netdevice Info */ + if (netdev) { + dev_info(&adapter->pdev->dev, "Net device Info\n"); + printk(KERN_INFO "Device Name state " + "trans_start last_rx\n"); + printk(KERN_INFO "%-15s %016lX %016lX %016lX\n", + netdev->name, + netdev->state, + netdev->trans_start, + netdev->last_rx); + } + + /* Print Registers */ + dev_info(&adapter->pdev->dev, "Register Dump\n"); + printk(KERN_INFO " Register Name Value\n"); + for (reginfo = (struct e1000_reg_info *)e1000_reg_info_tbl; + reginfo->name; reginfo++) { + e1000_regdump(hw, reginfo); + } + + /* Print TX Ring Summary */ + if (!netdev || !netif_running(netdev)) + goto exit; + + dev_info(&adapter->pdev->dev, "TX Rings Summary\n"); + printk(KERN_INFO "Queue [NTU] [NTC] [bi(ntc)->dma ]" + " leng ntw timestamp\n"); + buffer_info = &tx_ring->buffer_info[tx_ring->next_to_clean]; + printk(KERN_INFO " %5d %5X %5X %016llX %04X %3X %016llX\n", + 0, tx_ring->next_to_use, tx_ring->next_to_clean, + (u64)buffer_info->dma, + buffer_info->length, + buffer_info->next_to_watch, + (u64)buffer_info->time_stamp); + + /* Print TX Rings */ + if (!netif_msg_tx_done(adapter)) + goto rx_ring_summary; + + dev_info(&adapter->pdev->dev, "TX Rings Dump\n"); + + /* Transmit Descriptor Formats - DEXT[29] is 0 (Legacy) or 1 (Extended) + * + * Legacy Transmit Descriptor + * +--------------------------------------------------------------+ + * 0 | Buffer Address [63:0] (Reserved on Write Back) | + * +--------------------------------------------------------------+ + * 8 | Special | CSS | Status | CMD | CSO | Length | + * +--------------------------------------------------------------+ + * 63 48 47 36 35 32 31 24 23 16 15 0 + * + * Extended Context Descriptor (DTYP=0x0) for TSO or checksum offload + * 63 48 47 40 39 32 31 16 15 8 7 0 + * +----------------------------------------------------------------+ + * 0 | TUCSE | TUCS0 | TUCSS | IPCSE | IPCS0 | IPCSS | + * +----------------------------------------------------------------+ + * 8 | MSS | HDRLEN | RSV | STA | TUCMD | DTYP | PAYLEN | + * +----------------------------------------------------------------+ + * 63 48 47 40 39 36 35 32 31 24 23 20 19 0 + * + * Extended Data Descriptor (DTYP=0x1) + * +----------------------------------------------------------------+ + * 0 | Buffer Address [63:0] | + * +----------------------------------------------------------------+ + * 8 | VLAN tag | POPTS | Rsvd | Status | Command | DTYP | DTALEN | + * +----------------------------------------------------------------+ + * 63 48 47 40 39 36 35 32 31 24 23 20 19 0 + */ + printk(KERN_INFO "Tl[desc] [address 63:0 ] [SpeCssSCmCsLen]" + " [bi->dma ] leng ntw timestamp bi->skb " + "<-- Legacy format\n"); + printk(KERN_INFO "Tc[desc] [Ce CoCsIpceCoS] [MssHlRSCm0Plen]" + " [bi->dma ] leng ntw timestamp bi->skb " + "<-- Ext Context format\n"); + printk(KERN_INFO "Td[desc] [address 63:0 ] [VlaPoRSCm1Dlen]" + " [bi->dma ] leng ntw timestamp bi->skb " + "<-- Ext Data format\n"); + for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) { + tx_desc = E1000_TX_DESC(*tx_ring, i); + buffer_info = &tx_ring->buffer_info[i]; + u0 = (struct my_u0 *)tx_desc; + printk(KERN_INFO "T%c[0x%03X] %016llX %016llX %016llX " + "%04X %3X %016llX %p", + (!(le64_to_cpu(u0->b) & (1<<29)) ? 'l' : + ((le64_to_cpu(u0->b) & (1<<20)) ? 'd' : 'c')), i, + le64_to_cpu(u0->a), le64_to_cpu(u0->b), + (u64)buffer_info->dma, buffer_info->length, + buffer_info->next_to_watch, (u64)buffer_info->time_stamp, + buffer_info->skb); + if (i == tx_ring->next_to_use && i == tx_ring->next_to_clean) + printk(KERN_CONT " NTC/U\n"); + else if (i == tx_ring->next_to_use) + printk(KERN_CONT " NTU\n"); + else if (i == tx_ring->next_to_clean) + printk(KERN_CONT " NTC\n"); + else + printk(KERN_CONT "\n"); + + if (netif_msg_pktdata(adapter) && buffer_info->dma != 0) + print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, + 16, 1, phys_to_virt(buffer_info->dma), + buffer_info->length, true); + } + + /* Print RX Rings Summary */ +rx_ring_summary: + dev_info(&adapter->pdev->dev, "RX Rings Summary\n"); + printk(KERN_INFO "Queue [NTU] [NTC]\n"); + printk(KERN_INFO " %5d %5X %5X\n", 0, + rx_ring->next_to_use, rx_ring->next_to_clean); + + /* Print RX Rings */ + if (!netif_msg_rx_status(adapter)) + goto exit; + + dev_info(&adapter->pdev->dev, "RX Rings Dump\n"); + switch (adapter->rx_ps_pages) { + case 1: + case 2: + case 3: + /* [Extended] Packet Split Receive Descriptor Format + * + * +-----------------------------------------------------+ + * 0 | Buffer Address 0 [63:0] | + * +-----------------------------------------------------+ + * 8 | Buffer Address 1 [63:0] | + * +-----------------------------------------------------+ + * 16 | Buffer Address 2 [63:0] | + * +-----------------------------------------------------+ + * 24 | Buffer Address 3 [63:0] | + * +-----------------------------------------------------+ + */ + printk(KERN_INFO "R [desc] [buffer 0 63:0 ] " + "[buffer 1 63:0 ] " + "[buffer 2 63:0 ] [buffer 3 63:0 ] [bi->dma ] " + "[bi->skb] <-- Ext Pkt Split format\n"); + /* [Extended] Receive Descriptor (Write-Back) Format + * + * 63 48 47 32 31 13 12 8 7 4 3 0 + * +------------------------------------------------------+ + * 0 | Packet | IP | Rsvd | MRQ | Rsvd | MRQ RSS | + * | Checksum | Ident | | Queue | | Type | + * +------------------------------------------------------+ + * 8 | VLAN Tag | Length | Extended Error | Extended Status | + * +------------------------------------------------------+ + * 63 48 47 32 31 20 19 0 + */ + printk(KERN_INFO "RWB[desc] [ck ipid mrqhsh] " + "[vl l0 ee es] " + "[ l3 l2 l1 hs] [reserved ] ---------------- " + "[bi->skb] <-- Ext Rx Write-Back format\n"); + for (i = 0; i < rx_ring->count; i++) { + buffer_info = &rx_ring->buffer_info[i]; + rx_desc_ps = E1000_RX_DESC_PS(*rx_ring, i); + u1 = (struct my_u1 *)rx_desc_ps; + staterr = + le32_to_cpu(rx_desc_ps->wb.middle.status_error); + if (staterr & E1000_RXD_STAT_DD) { + /* Descriptor Done */ + printk(KERN_INFO "RWB[0x%03X] %016llX " + "%016llX %016llX %016llX " + "---------------- %p", i, + le64_to_cpu(u1->a), + le64_to_cpu(u1->b), + le64_to_cpu(u1->c), + le64_to_cpu(u1->d), + buffer_info->skb); + } else { + printk(KERN_INFO "R [0x%03X] %016llX " + "%016llX %016llX %016llX %016llX %p", i, + le64_to_cpu(u1->a), + le64_to_cpu(u1->b), + le64_to_cpu(u1->c), + le64_to_cpu(u1->d), + (u64)buffer_info->dma, + buffer_info->skb); + + if (netif_msg_pktdata(adapter)) + print_hex_dump(KERN_INFO, "", + DUMP_PREFIX_ADDRESS, 16, 1, + phys_to_virt(buffer_info->dma), + adapter->rx_ps_bsize0, true); + } + + if (i == rx_ring->next_to_use) + printk(KERN_CONT " NTU\n"); + else if (i == rx_ring->next_to_clean) + printk(KERN_CONT " NTC\n"); + else + printk(KERN_CONT "\n"); + } + break; + default: + case 0: + /* Legacy Receive Descriptor Format + * + * +-----------------------------------------------------+ + * | Buffer Address [63:0] | + * +-----------------------------------------------------+ + * | VLAN Tag | Errors | Status 0 | Packet csum | Length | + * +-----------------------------------------------------+ + * 63 48 47 40 39 32 31 16 15 0 + */ + printk(KERN_INFO "Rl[desc] [address 63:0 ] " + "[vl er S cks ln] [bi->dma ] [bi->skb] " + "<-- Legacy format\n"); + for (i = 0; rx_ring->desc && (i < rx_ring->count); i++) { + rx_desc = E1000_RX_DESC(*rx_ring, i); + buffer_info = &rx_ring->buffer_info[i]; + u0 = (struct my_u0 *)rx_desc; + printk(KERN_INFO "Rl[0x%03X] %016llX %016llX " + "%016llX %p", + i, le64_to_cpu(u0->a), le64_to_cpu(u0->b), + (u64)buffer_info->dma, buffer_info->skb); + if (i == rx_ring->next_to_use) + printk(KERN_CONT " NTU\n"); + else if (i == rx_ring->next_to_clean) + printk(KERN_CONT " NTC\n"); + else + printk(KERN_CONT "\n"); + + if (netif_msg_pktdata(adapter)) + print_hex_dump(KERN_INFO, "", + DUMP_PREFIX_ADDRESS, + 16, 1, phys_to_virt(buffer_info->dma), + adapter->rx_buffer_len, true); + } + } + +exit: + return; +} + +/** + * e1000_desc_unused - calculate if we have unused descriptors + **/ +static int e1000_desc_unused(struct e1000_ring *ring) +{ + if (ring->next_to_clean > ring->next_to_use) + return ring->next_to_clean - ring->next_to_use - 1; + + return ring->count + ring->next_to_clean - ring->next_to_use - 1; +} + +/** + * e1000_receive_skb - helper function to handle Rx indications + * @adapter: board private structure + * @status: descriptor status field as written by hardware + * @vlan: descriptor vlan field as written by hardware (no le/be conversion) + * @skb: pointer to sk_buff to be indicated to stack + **/ +static void e1000_receive_skb(struct e1000_adapter *adapter, + struct net_device *netdev, + struct sk_buff *skb, + u8 status, __le16 vlan) +{ + skb->protocol = eth_type_trans(skb, netdev); + + if (adapter->vlgrp && (status & E1000_RXD_STAT_VP)) + vlan_gro_receive(&adapter->napi, adapter->vlgrp, + le16_to_cpu(vlan), skb); + else + napi_gro_receive(&adapter->napi, skb); +} + +/** + * e1000_rx_checksum - Receive Checksum Offload for 82543 + * @adapter: board private structure + * @status_err: receive descriptor status and error fields + * @csum: receive descriptor csum field + * @sk_buff: socket buffer with received data + **/ +static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err, + u32 csum, struct sk_buff *skb) +{ + u16 status = (u16)status_err; + u8 errors = (u8)(status_err >> 24); + skb->ip_summed = CHECKSUM_NONE; + + /* Ignore Checksum bit is set */ + if (status & E1000_RXD_STAT_IXSM) + return; + /* TCP/UDP checksum error bit is set */ + if (errors & E1000_RXD_ERR_TCPE) { + /* let the stack verify checksum errors */ + adapter->hw_csum_err++; + return; + } + + /* TCP/UDP Checksum has not been calculated */ + if (!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS))) + return; + + /* It must be a TCP or UDP packet with a valid checksum */ + if (status & E1000_RXD_STAT_TCPCS) { + /* TCP checksum is good */ + skb->ip_summed = CHECKSUM_UNNECESSARY; + } else { + /* + * IP fragment with UDP payload + * Hardware complements the payload checksum, so we undo it + * and then put the value in host order for further stack use. + */ + __sum16 sum = (__force __sum16)htons(csum); + skb->csum = csum_unfold(~sum); + skb->ip_summed = CHECKSUM_COMPLETE; + } + adapter->hw_csum_good++; +} + +/** + * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended + * @adapter: address of board private structure + **/ +static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter, + int cleaned_count) +{ + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + struct e1000_ring *rx_ring = adapter->rx_ring; + struct e1000_rx_desc *rx_desc; + struct e1000_buffer *buffer_info; + struct sk_buff *skb; + unsigned int i; + unsigned int bufsz = adapter->rx_buffer_len; + + i = rx_ring->next_to_use; + buffer_info = &rx_ring->buffer_info[i]; + + while (cleaned_count--) { + skb = buffer_info->skb; + if (skb) { + skb_trim(skb, 0); + goto map_skb; + } + + skb = netdev_alloc_skb_ip_align(netdev, bufsz); + if (!skb) { + /* Better luck next round */ + adapter->alloc_rx_buff_failed++; + break; + } + + buffer_info->skb = skb; +map_skb: + buffer_info->dma = dma_map_single(&pdev->dev, skb->data, + adapter->rx_buffer_len, + DMA_FROM_DEVICE); + if (dma_mapping_error(&pdev->dev, buffer_info->dma)) { + dev_err(&pdev->dev, "RX DMA map failed\n"); + adapter->rx_dma_failed++; + break; + } + + rx_desc = E1000_RX_DESC(*rx_ring, i); + rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma); + + if (unlikely(!(i & (E1000_RX_BUFFER_WRITE - 1)))) { + /* + * Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. (Only + * applicable for weak-ordered memory model archs, + * such as IA-64). + */ + wmb(); + writel(i, adapter->hw.hw_addr + rx_ring->tail); + } + i++; + if (i == rx_ring->count) + i = 0; + buffer_info = &rx_ring->buffer_info[i]; + } + + rx_ring->next_to_use = i; +} + +/** + * e1000_alloc_rx_buffers_ps - Replace used receive buffers; packet split + * @adapter: address of board private structure + **/ +static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, + int cleaned_count) +{ + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + union e1000_rx_desc_packet_split *rx_desc; + struct e1000_ring *rx_ring = adapter->rx_ring; + struct e1000_buffer *buffer_info; + struct e1000_ps_page *ps_page; + struct sk_buff *skb; + unsigned int i, j; + + i = rx_ring->next_to_use; + buffer_info = &rx_ring->buffer_info[i]; + + while (cleaned_count--) { + rx_desc = E1000_RX_DESC_PS(*rx_ring, i); + + for (j = 0; j < PS_PAGE_BUFFERS; j++) { + ps_page = &buffer_info->ps_pages[j]; + if (j >= adapter->rx_ps_pages) { + /* all unused desc entries get hw null ptr */ + rx_desc->read.buffer_addr[j+1] = ~cpu_to_le64(0); + continue; + } + if (!ps_page->page) { + ps_page->page = alloc_page(GFP_ATOMIC); + if (!ps_page->page) { + adapter->alloc_rx_buff_failed++; + goto no_buffers; + } + ps_page->dma = dma_map_page(&pdev->dev, + ps_page->page, + 0, PAGE_SIZE, + DMA_FROM_DEVICE); + if (dma_mapping_error(&pdev->dev, + ps_page->dma)) { + dev_err(&adapter->pdev->dev, + "RX DMA page map failed\n"); + adapter->rx_dma_failed++; + goto no_buffers; + } + } + /* + * Refresh the desc even if buffer_addrs + * didn't change because each write-back + * erases this info. + */ + rx_desc->read.buffer_addr[j+1] = + cpu_to_le64(ps_page->dma); + } + + skb = netdev_alloc_skb_ip_align(netdev, + adapter->rx_ps_bsize0); + + if (!skb) { + adapter->alloc_rx_buff_failed++; + break; + } + + buffer_info->skb = skb; + buffer_info->dma = dma_map_single(&pdev->dev, skb->data, + adapter->rx_ps_bsize0, + DMA_FROM_DEVICE); + if (dma_mapping_error(&pdev->dev, buffer_info->dma)) { + dev_err(&pdev->dev, "RX DMA map failed\n"); + adapter->rx_dma_failed++; + /* cleanup skb */ + dev_kfree_skb_any(skb); + buffer_info->skb = NULL; + break; + } + + rx_desc->read.buffer_addr[0] = cpu_to_le64(buffer_info->dma); + + if (unlikely(!(i & (E1000_RX_BUFFER_WRITE - 1)))) { + /* + * Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. (Only + * applicable for weak-ordered memory model archs, + * such as IA-64). + */ + wmb(); + writel(i<<1, adapter->hw.hw_addr + rx_ring->tail); + } + + i++; + if (i == rx_ring->count) + i = 0; + buffer_info = &rx_ring->buffer_info[i]; + } + +no_buffers: + rx_ring->next_to_use = i; +} + +/** + * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers + * @adapter: address of board private structure + * @cleaned_count: number of buffers to allocate this pass + **/ + +static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter, + int cleaned_count) +{ + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + struct e1000_rx_desc *rx_desc; + struct e1000_ring *rx_ring = adapter->rx_ring; + struct e1000_buffer *buffer_info; + struct sk_buff *skb; + unsigned int i; + unsigned int bufsz = 256 - 16 /* for skb_reserve */; + + i = rx_ring->next_to_use; + buffer_info = &rx_ring->buffer_info[i]; + + while (cleaned_count--) { + skb = buffer_info->skb; + if (skb) { + skb_trim(skb, 0); + goto check_page; + } + + skb = netdev_alloc_skb_ip_align(netdev, bufsz); + if (unlikely(!skb)) { + /* Better luck next round */ + adapter->alloc_rx_buff_failed++; + break; + } + + buffer_info->skb = skb; +check_page: + /* allocate a new page if necessary */ + if (!buffer_info->page) { + buffer_info->page = alloc_page(GFP_ATOMIC); + if (unlikely(!buffer_info->page)) { + adapter->alloc_rx_buff_failed++; + break; + } + } + + if (!buffer_info->dma) + buffer_info->dma = dma_map_page(&pdev->dev, + buffer_info->page, 0, + PAGE_SIZE, + DMA_FROM_DEVICE); + + rx_desc = E1000_RX_DESC(*rx_ring, i); + rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma); + + if (unlikely(++i == rx_ring->count)) + i = 0; + buffer_info = &rx_ring->buffer_info[i]; + } + + if (likely(rx_ring->next_to_use != i)) { + rx_ring->next_to_use = i; + if (unlikely(i-- == 0)) + i = (rx_ring->count - 1); + + /* Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. (Only + * applicable for weak-ordered memory model archs, + * such as IA-64). */ + wmb(); + writel(i, adapter->hw.hw_addr + rx_ring->tail); + } +} + +/** + * e1000_clean_rx_irq - Send received data up the network stack; legacy + * @adapter: board private structure + * + * the return value indicates whether actual cleaning was done, there + * is no guarantee that everything was cleaned + **/ +static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, + int *work_done, int work_to_do) +{ + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + struct e1000_hw *hw = &adapter->hw; + struct e1000_ring *rx_ring = adapter->rx_ring; + struct e1000_rx_desc *rx_desc, *next_rxd; + struct e1000_buffer *buffer_info, *next_buffer; + u32 length; + unsigned int i; + int cleaned_count = 0; + bool cleaned = 0; + unsigned int total_rx_bytes = 0, total_rx_packets = 0; + + i = rx_ring->next_to_clean; + rx_desc = E1000_RX_DESC(*rx_ring, i); + buffer_info = &rx_ring->buffer_info[i]; + + while (rx_desc->status & E1000_RXD_STAT_DD) { + struct sk_buff *skb; + u8 status; + + if (*work_done >= work_to_do) + break; + (*work_done)++; + rmb(); /* read descriptor and rx_buffer_info after status DD */ + + status = rx_desc->status; + skb = buffer_info->skb; + + if (!adapter->ecdev) + buffer_info->skb = NULL; + + prefetch(skb->data - NET_IP_ALIGN); + + i++; + if (i == rx_ring->count) + i = 0; + next_rxd = E1000_RX_DESC(*rx_ring, i); + prefetch(next_rxd); + + next_buffer = &rx_ring->buffer_info[i]; + + cleaned = 1; + cleaned_count++; + dma_unmap_single(&pdev->dev, + buffer_info->dma, + adapter->rx_buffer_len, + DMA_FROM_DEVICE); + buffer_info->dma = 0; + + length = le16_to_cpu(rx_desc->length); + + /* + * !EOP means multiple descriptors were used to store a single + * packet, if that's the case we need to toss it. In fact, we + * need to toss every packet with the EOP bit clear and the + * next frame that _does_ have the EOP bit set, as it is by + * definition only a frame fragment + */ + if (unlikely(!(status & E1000_RXD_STAT_EOP))) + adapter->flags2 |= FLAG2_IS_DISCARDING; + + if (adapter->flags2 & FLAG2_IS_DISCARDING) { + /* All receives must fit into a single buffer */ + e_dbg("Receive packet consumed multiple buffers\n"); + /* recycle */ + buffer_info->skb = skb; + if (status & E1000_RXD_STAT_EOP) + adapter->flags2 &= ~FLAG2_IS_DISCARDING; + goto next_desc; + } + + if (!adapter->ecdev && (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) { + /* recycle */ + buffer_info->skb = skb; + goto next_desc; + } + + /* adjust length to remove Ethernet CRC */ + if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) + length -= 4; + + total_rx_bytes += length; + total_rx_packets++; + + /* + * code added for copybreak, this should improve + * performance for small packets with large amounts + * of reassembly being done in the stack + */ + if (!adapter->ecdev && length < copybreak) { + struct sk_buff *new_skb = + netdev_alloc_skb_ip_align(netdev, length); + if (new_skb) { + skb_copy_to_linear_data_offset(new_skb, + -NET_IP_ALIGN, + (skb->data - + NET_IP_ALIGN), + (length + + NET_IP_ALIGN)); + /* save the skb in buffer_info as good */ + buffer_info->skb = skb; + skb = new_skb; + } + /* else just continue with the old one */ + } + /* end copybreak code */ + skb_put(skb, length); + + /* Receive Checksum Offload */ + e1000_rx_checksum(adapter, + (u32)(status) | + ((u32)(rx_desc->errors) << 24), + le16_to_cpu(rx_desc->csum), skb); + + if (adapter->ecdev) { + ecdev_receive(adapter->ecdev, skb->data, length); + adapter->ec_watchdog_jiffies = jiffies; + } else { + e1000_receive_skb(adapter, netdev, skb,status,rx_desc->special); + } + +next_desc: + rx_desc->status = 0; + + /* return some buffers to hardware, one at a time is too slow */ + if (cleaned_count >= E1000_RX_BUFFER_WRITE) { + adapter->alloc_rx_buf(adapter, cleaned_count); + cleaned_count = 0; + } + + /* use prefetched values */ + rx_desc = next_rxd; + buffer_info = next_buffer; + } + rx_ring->next_to_clean = i; + + cleaned_count = e1000_desc_unused(rx_ring); + if (cleaned_count) + adapter->alloc_rx_buf(adapter, cleaned_count); + + adapter->total_rx_bytes += total_rx_bytes; + adapter->total_rx_packets += total_rx_packets; + netdev->stats.rx_bytes += total_rx_bytes; + netdev->stats.rx_packets += total_rx_packets; + return cleaned; +} + +static void e1000_put_txbuf(struct e1000_adapter *adapter, + struct e1000_buffer *buffer_info) +{ + if (adapter->ecdev) + return; + + if (buffer_info->dma) { + if (buffer_info->mapped_as_page) + dma_unmap_page(&adapter->pdev->dev, buffer_info->dma, + buffer_info->length, DMA_TO_DEVICE); + else + dma_unmap_single(&adapter->pdev->dev, buffer_info->dma, + buffer_info->length, DMA_TO_DEVICE); + buffer_info->dma = 0; + } + if (buffer_info->skb) { + dev_kfree_skb_any(buffer_info->skb); + buffer_info->skb = NULL; + } + buffer_info->time_stamp = 0; +} + +static void e1000_print_hw_hang(struct work_struct *work) +{ + struct e1000_adapter *adapter = container_of(work, + struct e1000_adapter, + print_hang_task); + struct e1000_ring *tx_ring = adapter->tx_ring; + unsigned int i = tx_ring->next_to_clean; + unsigned int eop = tx_ring->buffer_info[i].next_to_watch; + struct e1000_tx_desc *eop_desc = E1000_TX_DESC(*tx_ring, eop); + struct e1000_hw *hw = &adapter->hw; + u16 phy_status, phy_1000t_status, phy_ext_status; + u16 pci_status; + + e1e_rphy(hw, PHY_STATUS, &phy_status); + e1e_rphy(hw, PHY_1000T_STATUS, &phy_1000t_status); + e1e_rphy(hw, PHY_EXT_STATUS, &phy_ext_status); + + pci_read_config_word(adapter->pdev, PCI_STATUS, &pci_status); + + /* detected Hardware unit hang */ + e_err("Detected Hardware Unit Hang:\n" + " TDH <%x>\n" + " TDT <%x>\n" + " next_to_use <%x>\n" + " next_to_clean <%x>\n" + "buffer_info[next_to_clean]:\n" + " time_stamp <%lx>\n" + " next_to_watch <%x>\n" + " jiffies <%lx>\n" + " next_to_watch.status <%x>\n" + "MAC Status <%x>\n" + "PHY Status <%x>\n" + "PHY 1000BASE-T Status <%x>\n" + "PHY Extended Status <%x>\n" + "PCI Status <%x>\n", + readl(adapter->hw.hw_addr + tx_ring->head), + readl(adapter->hw.hw_addr + tx_ring->tail), + tx_ring->next_to_use, + tx_ring->next_to_clean, + tx_ring->buffer_info[eop].time_stamp, + eop, + jiffies, + eop_desc->upper.fields.status, + er32(STATUS), + phy_status, + phy_1000t_status, + phy_ext_status, + pci_status); +} + +/** + * e1000_clean_tx_irq - Reclaim resources after transmit completes + * @adapter: board private structure + * + * the return value indicates whether actual cleaning was done, there + * is no guarantee that everything was cleaned + **/ +static bool e1000_clean_tx_irq(struct e1000_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct e1000_hw *hw = &adapter->hw; + struct e1000_ring *tx_ring = adapter->tx_ring; + struct e1000_tx_desc *tx_desc, *eop_desc; + struct e1000_buffer *buffer_info; + unsigned int i, eop; + unsigned int count = 0; + unsigned int total_tx_bytes = 0, total_tx_packets = 0; + + i = tx_ring->next_to_clean; + eop = tx_ring->buffer_info[i].next_to_watch; + eop_desc = E1000_TX_DESC(*tx_ring, eop); + + while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) && + (count < tx_ring->count)) { + bool cleaned = false; + rmb(); /* read buffer_info after eop_desc */ + for (; !cleaned; count++) { + tx_desc = E1000_TX_DESC(*tx_ring, i); + buffer_info = &tx_ring->buffer_info[i]; + cleaned = (i == eop); + + if (cleaned) { + total_tx_packets += buffer_info->segs; + total_tx_bytes += buffer_info->bytecount; + } + + e1000_put_txbuf(adapter, buffer_info); + tx_desc->upper.data = 0; + + i++; + if (i == tx_ring->count) + i = 0; + } + + if (i == tx_ring->next_to_use) + break; + eop = tx_ring->buffer_info[i].next_to_watch; + eop_desc = E1000_TX_DESC(*tx_ring, eop); + } + + tx_ring->next_to_clean = i; + +#define TX_WAKE_THRESHOLD 32 + if (!adapter->ecdev && count && netif_carrier_ok(netdev) && + e1000_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD) { + /* Make sure that anybody stopping the queue after this + * sees the new next_to_clean. + */ + smp_mb(); + + if (netif_queue_stopped(netdev) && + !(test_bit(__E1000_DOWN, &adapter->state))) { + netif_wake_queue(netdev); + ++adapter->restart_queue; + } + } + + if (!adapter->ecdev && adapter->detect_tx_hung) { + /* + * Detect a transmit hang in hardware, this serializes the + * check with the clearing of time_stamp and movement of i + */ + adapter->detect_tx_hung = 0; + if (tx_ring->buffer_info[i].time_stamp && + time_after(jiffies, tx_ring->buffer_info[i].time_stamp + + (adapter->tx_timeout_factor * HZ)) && + !(er32(STATUS) & E1000_STATUS_TXOFF)) { + schedule_work(&adapter->print_hang_task); + netif_stop_queue(netdev); + } + } + adapter->total_tx_bytes += total_tx_bytes; + adapter->total_tx_packets += total_tx_packets; + netdev->stats.tx_bytes += total_tx_bytes; + netdev->stats.tx_packets += total_tx_packets; + return (count < tx_ring->count); +} + +/** + * e1000_clean_rx_irq_ps - Send received data up the network stack; packet split + * @adapter: board private structure + * + * the return value indicates whether actual cleaning was done, there + * is no guarantee that everything was cleaned + **/ +static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, + int *work_done, int work_to_do) +{ + struct e1000_hw *hw = &adapter->hw; + union e1000_rx_desc_packet_split *rx_desc, *next_rxd; + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + struct e1000_ring *rx_ring = adapter->rx_ring; + struct e1000_buffer *buffer_info, *next_buffer; + struct e1000_ps_page *ps_page; + struct sk_buff *skb; + unsigned int i, j; + u32 length, staterr; + int cleaned_count = 0; + bool cleaned = 0; + unsigned int total_rx_bytes = 0, total_rx_packets = 0; + + i = rx_ring->next_to_clean; + rx_desc = E1000_RX_DESC_PS(*rx_ring, i); + staterr = le32_to_cpu(rx_desc->wb.middle.status_error); + buffer_info = &rx_ring->buffer_info[i]; + + while (staterr & E1000_RXD_STAT_DD) { + if (*work_done >= work_to_do) + break; + (*work_done)++; + skb = buffer_info->skb; + rmb(); /* read descriptor and rx_buffer_info after status DD */ + + /* in the packet split case this is header only */ + prefetch(skb->data - NET_IP_ALIGN); + + i++; + if (i == rx_ring->count) + i = 0; + next_rxd = E1000_RX_DESC_PS(*rx_ring, i); + prefetch(next_rxd); + + next_buffer = &rx_ring->buffer_info[i]; + + cleaned = 1; + cleaned_count++; + dma_unmap_single(&pdev->dev, buffer_info->dma, + adapter->rx_ps_bsize0, + DMA_FROM_DEVICE); + buffer_info->dma = 0; + + /* see !EOP comment in other rx routine */ + if (!(staterr & E1000_RXD_STAT_EOP)) + adapter->flags2 |= FLAG2_IS_DISCARDING; + + if (adapter->flags2 & FLAG2_IS_DISCARDING) { + e_dbg("Packet Split buffers didn't pick up the full " + "packet\n"); + if (!adapter->ecdev) dev_kfree_skb_irq(skb); + if (staterr & E1000_RXD_STAT_EOP) + adapter->flags2 &= ~FLAG2_IS_DISCARDING; + goto next_desc; + } + + if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) { + if (!adapter->ecdev) + dev_kfree_skb_irq(skb); + goto next_desc; + } + + length = le16_to_cpu(rx_desc->wb.middle.length0); + + if (!length) { + e_dbg("Last part of the packet spanning multiple " + "descriptors\n"); + if (!adapter->ecdev) + dev_kfree_skb_irq(skb); + goto next_desc; + } + + /* Good Receive */ + skb_put(skb, length); + + { + /* + * this looks ugly, but it seems compiler issues make it + * more efficient than reusing j + */ + int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]); + + /* + * page alloc/put takes too long and effects small packet + * throughput, so unsplit small packets and save the alloc/put + * only valid in softirq (napi) context to call kmap_* + */ + if (l1 && (l1 <= copybreak) && + ((length + l1) <= adapter->rx_ps_bsize0)) { + u8 *vaddr; + + ps_page = &buffer_info->ps_pages[0]; + + /* + * there is no documentation about how to call + * kmap_atomic, so we can't hold the mapping + * very long + */ + dma_sync_single_for_cpu(&pdev->dev, ps_page->dma, + PAGE_SIZE, DMA_FROM_DEVICE); + vaddr = kmap_atomic(ps_page->page, KM_SKB_DATA_SOFTIRQ); + memcpy(skb_tail_pointer(skb), vaddr, l1); + kunmap_atomic(vaddr, KM_SKB_DATA_SOFTIRQ); + dma_sync_single_for_device(&pdev->dev, ps_page->dma, + PAGE_SIZE, DMA_FROM_DEVICE); + + /* remove the CRC */ + if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) + l1 -= 4; + + skb_put(skb, l1); + goto copydone; + } /* if */ + } + + for (j = 0; j < PS_PAGE_BUFFERS; j++) { + length = le16_to_cpu(rx_desc->wb.upper.length[j]); + if (!length) + break; + + ps_page = &buffer_info->ps_pages[j]; + dma_unmap_page(&pdev->dev, ps_page->dma, PAGE_SIZE, + DMA_FROM_DEVICE); + ps_page->dma = 0; + skb_fill_page_desc(skb, j, ps_page->page, 0, length); + ps_page->page = NULL; + skb->len += length; + skb->data_len += length; + skb->truesize += length; + } + + /* strip the ethernet crc, problem is we're using pages now so + * this whole operation can get a little cpu intensive + */ + if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) + pskb_trim(skb, skb->len - 4); + +copydone: + total_rx_bytes += skb->len; + total_rx_packets++; + + e1000_rx_checksum(adapter, staterr, le16_to_cpu( + rx_desc->wb.lower.hi_dword.csum_ip.csum), skb); + + if (rx_desc->wb.upper.header_status & + cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP)) + adapter->rx_hdr_split++; + + if (adapter->ecdev) { + ecdev_receive(adapter->ecdev, skb->data, length); + adapter->ec_watchdog_jiffies = jiffies; + } else { + e1000_receive_skb(adapter, netdev, skb, + staterr, rx_desc->wb.middle.vlan); + } + +next_desc: + rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF); + if (!adapter->ecdev) buffer_info->skb = NULL; + + /* return some buffers to hardware, one at a time is too slow */ + if (cleaned_count >= E1000_RX_BUFFER_WRITE) { + adapter->alloc_rx_buf(adapter, cleaned_count); + cleaned_count = 0; + } + + /* use prefetched values */ + rx_desc = next_rxd; + buffer_info = next_buffer; + + staterr = le32_to_cpu(rx_desc->wb.middle.status_error); + } + rx_ring->next_to_clean = i; + + cleaned_count = e1000_desc_unused(rx_ring); + if (cleaned_count) + adapter->alloc_rx_buf(adapter, cleaned_count); + + adapter->total_rx_bytes += total_rx_bytes; + adapter->total_rx_packets += total_rx_packets; + netdev->stats.rx_bytes += total_rx_bytes; + netdev->stats.rx_packets += total_rx_packets; + return cleaned; +} + +/** + * e1000_consume_page - helper function + **/ +static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb, + u16 length) +{ + bi->page = NULL; + skb->len += length; + skb->data_len += length; + skb->truesize += length; +} + +/** + * e1000_clean_jumbo_rx_irq - Send received data up the network stack; legacy + * @adapter: board private structure + * + * the return value indicates whether actual cleaning was done, there + * is no guarantee that everything was cleaned + **/ + +static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter, + int *work_done, int work_to_do) +{ + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + struct e1000_ring *rx_ring = adapter->rx_ring; + struct e1000_rx_desc *rx_desc, *next_rxd; + struct e1000_buffer *buffer_info, *next_buffer; + u32 length; + unsigned int i; + int cleaned_count = 0; + bool cleaned = false; + unsigned int total_rx_bytes=0, total_rx_packets=0; + + i = rx_ring->next_to_clean; + rx_desc = E1000_RX_DESC(*rx_ring, i); + buffer_info = &rx_ring->buffer_info[i]; + + while (rx_desc->status & E1000_RXD_STAT_DD) { + struct sk_buff *skb; + u8 status; + + if (*work_done >= work_to_do) + break; + (*work_done)++; + rmb(); /* read descriptor and rx_buffer_info after status DD */ + + status = rx_desc->status; + skb = buffer_info->skb; + + if (!adapter->ecdev) + buffer_info->skb = NULL; + + ++i; + if (i == rx_ring->count) + i = 0; + next_rxd = E1000_RX_DESC(*rx_ring, i); + prefetch(next_rxd); + + next_buffer = &rx_ring->buffer_info[i]; + + cleaned = true; + cleaned_count++; + dma_unmap_page(&pdev->dev, buffer_info->dma, PAGE_SIZE, + DMA_FROM_DEVICE); + buffer_info->dma = 0; + + length = le16_to_cpu(rx_desc->length); + + /* errors is only valid for DD + EOP descriptors */ + if (!adapter->ecdev && unlikely((status & E1000_RXD_STAT_EOP) && + (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK))) { + /* recycle both page and skb */ + buffer_info->skb = skb; + /* an error means any chain goes out the window + * too */ + if (rx_ring->rx_skb_top) + dev_kfree_skb(rx_ring->rx_skb_top); + rx_ring->rx_skb_top = NULL; + goto next_desc; + } + +#define rxtop rx_ring->rx_skb_top + if (!(status & E1000_RXD_STAT_EOP)) { + /* this descriptor is only the beginning (or middle) */ + if (!rxtop) { + /* this is the beginning of a chain */ + rxtop = skb; + skb_fill_page_desc(rxtop, 0, buffer_info->page, + 0, length); + } else { + /* this is the middle of a chain */ + skb_fill_page_desc(rxtop, + skb_shinfo(rxtop)->nr_frags, + buffer_info->page, 0, length); + /* re-use the skb, only consumed the page */ + buffer_info->skb = skb; + } + e1000_consume_page(buffer_info, rxtop, length); + goto next_desc; + } else { + if (rxtop) { + /* end of the chain */ + skb_fill_page_desc(rxtop, + skb_shinfo(rxtop)->nr_frags, + buffer_info->page, 0, length); + /* re-use the current skb, we only consumed the + * page */ + buffer_info->skb = skb; + skb = rxtop; + rxtop = NULL; + e1000_consume_page(buffer_info, skb, length); + } else { + /* no chain, got EOP, this buf is the packet + * copybreak to save the put_page/alloc_page */ + if (length <= copybreak && + skb_tailroom(skb) >= length) { + u8 *vaddr; + vaddr = kmap_atomic(buffer_info->page, + KM_SKB_DATA_SOFTIRQ); + memcpy(skb_tail_pointer(skb), vaddr, + length); + kunmap_atomic(vaddr, + KM_SKB_DATA_SOFTIRQ); + /* re-use the page, so don't erase + * buffer_info->page */ + skb_put(skb, length); + } else { + skb_fill_page_desc(skb, 0, + buffer_info->page, 0, + length); + e1000_consume_page(buffer_info, skb, + length); + } + } + } + + /* Receive Checksum Offload XXX recompute due to CRC strip? */ + e1000_rx_checksum(adapter, + (u32)(status) | + ((u32)(rx_desc->errors) << 24), + le16_to_cpu(rx_desc->csum), skb); + + /* probably a little skewed due to removing CRC */ + total_rx_bytes += skb->len; + total_rx_packets++; + + /* eth type trans needs skb->data to point to something */ + if (!adapter->ecdev && !pskb_may_pull(skb, ETH_HLEN)) { + e_err("pskb_may_pull failed.\n"); + dev_kfree_skb(skb); + goto next_desc; + } + + if (adapter->ecdev) { + ecdev_receive(adapter->ecdev, skb->data, length); + adapter->ec_watchdog_jiffies = jiffies; + } else { + e1000_receive_skb(adapter, netdev, skb, status, + rx_desc->special); + } + +next_desc: + rx_desc->status = 0; + + /* return some buffers to hardware, one at a time is too slow */ + if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) { + adapter->alloc_rx_buf(adapter, cleaned_count); + cleaned_count = 0; + } + + /* use prefetched values */ + rx_desc = next_rxd; + buffer_info = next_buffer; + } + rx_ring->next_to_clean = i; + + cleaned_count = e1000_desc_unused(rx_ring); + if (cleaned_count) + adapter->alloc_rx_buf(adapter, cleaned_count); + + adapter->total_rx_bytes += total_rx_bytes; + adapter->total_rx_packets += total_rx_packets; + netdev->stats.rx_bytes += total_rx_bytes; + netdev->stats.rx_packets += total_rx_packets; + return cleaned; +} + +/** + * e1000_clean_rx_ring - Free Rx Buffers per Queue + * @adapter: board private structure + **/ +static void e1000_clean_rx_ring(struct e1000_adapter *adapter) +{ + struct e1000_ring *rx_ring = adapter->rx_ring; + struct e1000_buffer *buffer_info; + struct e1000_ps_page *ps_page; + struct pci_dev *pdev = adapter->pdev; + unsigned int i, j; + + /* Free all the Rx ring sk_buffs */ + for (i = 0; i < rx_ring->count; i++) { + buffer_info = &rx_ring->buffer_info[i]; + if (buffer_info->dma) { + if (adapter->clean_rx == e1000_clean_rx_irq) + dma_unmap_single(&pdev->dev, buffer_info->dma, + adapter->rx_buffer_len, + DMA_FROM_DEVICE); + else if (adapter->clean_rx == e1000_clean_jumbo_rx_irq) + dma_unmap_page(&pdev->dev, buffer_info->dma, + PAGE_SIZE, + DMA_FROM_DEVICE); + else if (adapter->clean_rx == e1000_clean_rx_irq_ps) + dma_unmap_single(&pdev->dev, buffer_info->dma, + adapter->rx_ps_bsize0, + DMA_FROM_DEVICE); + buffer_info->dma = 0; + } + + if (buffer_info->page) { + put_page(buffer_info->page); + buffer_info->page = NULL; + } + + if (buffer_info->skb) { + dev_kfree_skb(buffer_info->skb); + buffer_info->skb = NULL; + } + + for (j = 0; j < PS_PAGE_BUFFERS; j++) { + ps_page = &buffer_info->ps_pages[j]; + if (!ps_page->page) + break; + dma_unmap_page(&pdev->dev, ps_page->dma, PAGE_SIZE, + DMA_FROM_DEVICE); + ps_page->dma = 0; + put_page(ps_page->page); + ps_page->page = NULL; + } + } + + /* there also may be some cached data from a chained receive */ + if (rx_ring->rx_skb_top) { + dev_kfree_skb(rx_ring->rx_skb_top); + rx_ring->rx_skb_top = NULL; + } + + /* Zero out the descriptor ring */ + memset(rx_ring->desc, 0, rx_ring->size); + + rx_ring->next_to_clean = 0; + rx_ring->next_to_use = 0; + adapter->flags2 &= ~FLAG2_IS_DISCARDING; + + writel(0, adapter->hw.hw_addr + rx_ring->head); + writel(0, adapter->hw.hw_addr + rx_ring->tail); +} + +static void e1000e_downshift_workaround(struct work_struct *work) +{ + struct e1000_adapter *adapter = container_of(work, + struct e1000_adapter, downshift_task); + + e1000e_gig_downshift_workaround_ich8lan(&adapter->hw); +} + +/** + * e1000_intr_msi - Interrupt Handler + * @irq: interrupt number + * @data: pointer to a network interface device structure + **/ +static irqreturn_t e1000_intr_msi(int irq, void *data) +{ + struct net_device *netdev = data; + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 icr = er32(ICR); + + if (adapter->ecdev) { + int ec_work_done = 0; + adapter->clean_rx(adapter, &ec_work_done, 100); + e1000_clean_tx_irq(adapter); + return IRQ_HANDLED; + } + /* + * read ICR disables interrupts using IAM + */ + + if (icr & E1000_ICR_LSC) { + hw->mac.get_link_status = 1; + /* + * ICH8 workaround-- Call gig speed drop workaround on cable + * disconnect (LSC) before accessing any PHY registers + */ + if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) && + (!(er32(STATUS) & E1000_STATUS_LU))) + schedule_work(&adapter->downshift_task); + + /* + * 80003ES2LAN workaround-- For packet buffer work-around on + * link down event; disable receives here in the ISR and reset + * adapter in watchdog + */ + if (netif_carrier_ok(netdev) && + adapter->flags & FLAG_RX_NEEDS_RESTART) { + /* disable receives */ + u32 rctl = er32(RCTL); + ew32(RCTL, rctl & ~E1000_RCTL_EN); + adapter->flags |= FLAG_RX_RESTART_NOW; + } + /* guard against interrupt when we're going down */ + if (!test_bit(__E1000_DOWN, &adapter->state)) + mod_timer(&adapter->watchdog_timer, jiffies + 1); + } + + if (napi_schedule_prep(&adapter->napi)) { + adapter->total_tx_bytes = 0; + adapter->total_tx_packets = 0; + adapter->total_rx_bytes = 0; + adapter->total_rx_packets = 0; + __napi_schedule(&adapter->napi); + } + + return IRQ_HANDLED; +} + +/** + * e1000_intr - Interrupt Handler + * @irq: interrupt number + * @data: pointer to a network interface device structure + **/ +static irqreturn_t e1000_intr(int irq, void *data) +{ + struct net_device *netdev = data; + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 rctl, icr = er32(ICR); + + if (!icr || test_bit(__E1000_DOWN, &adapter->state)) + return IRQ_NONE; /* Not our interrupt */ + + /* + * IMS will not auto-mask if INT_ASSERTED is not set, and if it is + * not set, then the adapter didn't send an interrupt + */ + if (!adapter->ecdev && !(icr & E1000_ICR_INT_ASSERTED)) + return IRQ_NONE; + + /* + * Interrupt Auto-Mask...upon reading ICR, + * interrupts are masked. No need for the + * IMC write + */ + + if (!adapter->ecdev && (icr & E1000_ICR_LSC)) { + hw->mac.get_link_status = 1; + /* + * ICH8 workaround-- Call gig speed drop workaround on cable + * disconnect (LSC) before accessing any PHY registers + */ + if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) && + (!(er32(STATUS) & E1000_STATUS_LU))) + schedule_work(&adapter->downshift_task); + + /* + * 80003ES2LAN workaround-- + * For packet buffer work-around on link down event; + * disable receives here in the ISR and + * reset adapter in watchdog + */ + if (netif_carrier_ok(netdev) && + (adapter->flags & FLAG_RX_NEEDS_RESTART)) { + /* disable receives */ + rctl = er32(RCTL); + ew32(RCTL, rctl & ~E1000_RCTL_EN); + adapter->flags |= FLAG_RX_RESTART_NOW; + } + /* guard against interrupt when we're going down */ + if (!test_bit(__E1000_DOWN, &adapter->state)) + mod_timer(&adapter->watchdog_timer, jiffies + 1); + } + + if (adapter->ecdev) { + int ec_work_done = 0; + adapter->clean_rx(adapter, &ec_work_done, 100); + e1000_clean_tx_irq(adapter); + return IRQ_HANDLED; + } + + if (napi_schedule_prep(&adapter->napi)) { + adapter->total_tx_bytes = 0; + adapter->total_tx_packets = 0; + adapter->total_rx_bytes = 0; + adapter->total_rx_packets = 0; + __napi_schedule(&adapter->napi); + } + + return IRQ_HANDLED; +} + +static irqreturn_t e1000_msix_other(int irq, void *data) +{ + struct net_device *netdev = data; + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 icr = er32(ICR); + + if (!(icr & E1000_ICR_INT_ASSERTED)) { + if (!test_bit(__E1000_DOWN, &adapter->state)) + ew32(IMS, E1000_IMS_OTHER); + return IRQ_NONE; + } + + if (icr & adapter->eiac_mask) + ew32(ICS, (icr & adapter->eiac_mask)); + + if (icr & E1000_ICR_OTHER) { + if (!(icr & E1000_ICR_LSC)) + goto no_link_interrupt; + hw->mac.get_link_status = 1; + /* guard against interrupt when we're going down */ + if (!adapter->ecdev && !test_bit(__E1000_DOWN, &adapter->state)) + mod_timer(&adapter->watchdog_timer, jiffies + 1); + } + +no_link_interrupt: + if (!test_bit(__E1000_DOWN, &adapter->state)) + ew32(IMS, E1000_IMS_LSC | E1000_IMS_OTHER); + + return IRQ_HANDLED; +} + + +static irqreturn_t e1000_intr_msix_tx(int irq, void *data) +{ + struct net_device *netdev = data; + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + struct e1000_ring *tx_ring = adapter->tx_ring; + + + adapter->total_tx_bytes = 0; + adapter->total_tx_packets = 0; + + if (!e1000_clean_tx_irq(adapter)) + /* Ring was not completely cleaned, so fire another interrupt */ + ew32(ICS, tx_ring->ims_val); + + return IRQ_HANDLED; +} + +static irqreturn_t e1000_intr_msix_rx(int irq, void *data) +{ + struct net_device *netdev = data; + struct e1000_adapter *adapter = netdev_priv(netdev); + + /* Write the ITR value calculated at the end of the + * previous interrupt. + */ + if (adapter->rx_ring->set_itr) { + writel(1000000000 / (adapter->rx_ring->itr_val * 256), + adapter->hw.hw_addr + adapter->rx_ring->itr_register); + adapter->rx_ring->set_itr = 0; + } + + if (adapter->ecdev) { + int ec_work_done = 0; + adapter->clean_rx(adapter, &ec_work_done, 100); + } else { + if (napi_schedule_prep(&adapter->napi)) { + adapter->total_rx_bytes = 0; + adapter->total_rx_packets = 0; + __napi_schedule(&adapter->napi); + } + } + return IRQ_HANDLED; +} + +/** + * e1000_configure_msix - Configure MSI-X hardware + * + * e1000_configure_msix sets up the hardware to properly + * generate MSI-X interrupts. + **/ +static void e1000_configure_msix(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct e1000_ring *rx_ring = adapter->rx_ring; + struct e1000_ring *tx_ring = adapter->tx_ring; + int vector = 0; + u32 ctrl_ext, ivar = 0; + + adapter->eiac_mask = 0; + + /* Workaround issue with spurious interrupts on 82574 in MSI-X mode */ + if (hw->mac.type == e1000_82574) { + u32 rfctl = er32(RFCTL); + rfctl |= E1000_RFCTL_ACK_DIS; + ew32(RFCTL, rfctl); + } + +#define E1000_IVAR_INT_ALLOC_VALID 0x8 + /* Configure Rx vector */ + rx_ring->ims_val = E1000_IMS_RXQ0; + adapter->eiac_mask |= rx_ring->ims_val; + if (rx_ring->itr_val) + writel(1000000000 / (rx_ring->itr_val * 256), + hw->hw_addr + rx_ring->itr_register); + else + writel(1, hw->hw_addr + rx_ring->itr_register); + ivar = E1000_IVAR_INT_ALLOC_VALID | vector; + + /* Configure Tx vector */ + tx_ring->ims_val = E1000_IMS_TXQ0; + vector++; + if (tx_ring->itr_val) + writel(1000000000 / (tx_ring->itr_val * 256), + hw->hw_addr + tx_ring->itr_register); + else + writel(1, hw->hw_addr + tx_ring->itr_register); + adapter->eiac_mask |= tx_ring->ims_val; + ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 8); + + /* set vector for Other Causes, e.g. link changes */ + vector++; + ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 16); + if (rx_ring->itr_val) + writel(1000000000 / (rx_ring->itr_val * 256), + hw->hw_addr + E1000_EITR_82574(vector)); + else + writel(1, hw->hw_addr + E1000_EITR_82574(vector)); + + /* Cause Tx interrupts on every write back */ + ivar |= (1 << 31); + + ew32(IVAR, ivar); + + /* enable MSI-X PBA support */ + ctrl_ext = er32(CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_PBA_CLR; + + /* Auto-Mask Other interrupts upon ICR read */ +#define E1000_EIAC_MASK_82574 0x01F00000 + ew32(IAM, ~E1000_EIAC_MASK_82574 | E1000_IMS_OTHER); + ctrl_ext |= E1000_CTRL_EXT_EIAME; + ew32(CTRL_EXT, ctrl_ext); + e1e_flush(); +} + +void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter) +{ + if (adapter->msix_entries) { + pci_disable_msix(adapter->pdev); + kfree(adapter->msix_entries); + adapter->msix_entries = NULL; + } else if (adapter->flags & FLAG_MSI_ENABLED) { + pci_disable_msi(adapter->pdev); + adapter->flags &= ~FLAG_MSI_ENABLED; + } +} + +/** + * e1000e_set_interrupt_capability - set MSI or MSI-X if supported + * + * Attempt to configure interrupts using the best available + * capabilities of the hardware and kernel. + **/ +void e1000e_set_interrupt_capability(struct e1000_adapter *adapter) +{ + int err; + int numvecs, i; + + + switch (adapter->int_mode) { + case E1000E_INT_MODE_MSIX: + if (adapter->flags & FLAG_HAS_MSIX) { + numvecs = 3; /* RxQ0, TxQ0 and other */ + adapter->msix_entries = kcalloc(numvecs, + sizeof(struct msix_entry), + GFP_KERNEL); + if (adapter->msix_entries) { + for (i = 0; i < numvecs; i++) + adapter->msix_entries[i].entry = i; + + err = pci_enable_msix(adapter->pdev, + adapter->msix_entries, + numvecs); + if (err == 0) + return; + } + /* MSI-X failed, so fall through and try MSI */ + e_err("Failed to initialize MSI-X interrupts. " + "Falling back to MSI interrupts.\n"); + e1000e_reset_interrupt_capability(adapter); + } + adapter->int_mode = E1000E_INT_MODE_MSI; + /* Fall through */ + case E1000E_INT_MODE_MSI: + if (!pci_enable_msi(adapter->pdev)) { + adapter->flags |= FLAG_MSI_ENABLED; + } else { + adapter->int_mode = E1000E_INT_MODE_LEGACY; + e_err("Failed to initialize MSI interrupts. Falling " + "back to legacy interrupts.\n"); + } + /* Fall through */ + case E1000E_INT_MODE_LEGACY: + /* Don't do anything; this is the system default */ + break; + } +} + +/** + * e1000_request_msix - Initialize MSI-X interrupts + * + * e1000_request_msix allocates MSI-X vectors and requests interrupts from the + * kernel. + **/ +static int e1000_request_msix(struct e1000_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + int err = 0, vector = 0; + + if (strlen(netdev->name) < (IFNAMSIZ - 5)) + sprintf(adapter->rx_ring->name, "%s-rx-0", netdev->name); + else + memcpy(adapter->rx_ring->name, netdev->name, IFNAMSIZ); + err = request_irq(adapter->msix_entries[vector].vector, + e1000_intr_msix_rx, 0, adapter->rx_ring->name, + netdev); + if (err) + goto out; + adapter->rx_ring->itr_register = E1000_EITR_82574(vector); + adapter->rx_ring->itr_val = adapter->itr; + vector++; + + if (strlen(netdev->name) < (IFNAMSIZ - 5)) + sprintf(adapter->tx_ring->name, "%s-tx-0", netdev->name); + else + memcpy(adapter->tx_ring->name, netdev->name, IFNAMSIZ); + err = request_irq(adapter->msix_entries[vector].vector, + e1000_intr_msix_tx, 0, adapter->tx_ring->name, + netdev); + if (err) + goto out; + adapter->tx_ring->itr_register = E1000_EITR_82574(vector); + adapter->tx_ring->itr_val = adapter->itr; + vector++; + + err = request_irq(adapter->msix_entries[vector].vector, + e1000_msix_other, 0, netdev->name, netdev); + if (err) + goto out; + + e1000_configure_msix(adapter); + return 0; +out: + return err; +} + +/** + * e1000_request_irq - initialize interrupts + * + * Attempts to configure interrupts using the best available + * capabilities of the hardware and kernel. + **/ +static int e1000_request_irq(struct e1000_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + int err; + + if (adapter->ecdev) + return 0; + + if (adapter->msix_entries) { + err = e1000_request_msix(adapter); + if (!err) + return err; + /* fall back to MSI */ + e1000e_reset_interrupt_capability(adapter); + adapter->int_mode = E1000E_INT_MODE_MSI; + e1000e_set_interrupt_capability(adapter); + } + if (adapter->flags & FLAG_MSI_ENABLED) { + err = request_irq(adapter->pdev->irq, e1000_intr_msi, 0, + netdev->name, netdev); + if (!err) + return err; + + /* fall back to legacy interrupt */ + e1000e_reset_interrupt_capability(adapter); + adapter->int_mode = E1000E_INT_MODE_LEGACY; + } + + err = request_irq(adapter->pdev->irq, e1000_intr, IRQF_SHARED, + netdev->name, netdev); + if (err) + e_err("Unable to allocate interrupt, Error: %d\n", err); + + return err; +} + +static void e1000_free_irq(struct e1000_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + + if (adapter->ecdev) + return; + + if (adapter->msix_entries) { + int vector = 0; + + free_irq(adapter->msix_entries[vector].vector, netdev); + vector++; + + free_irq(adapter->msix_entries[vector].vector, netdev); + vector++; + + /* Other Causes interrupt vector */ + free_irq(adapter->msix_entries[vector].vector, netdev); + return; + } + + free_irq(adapter->pdev->irq, netdev); +} + +/** + * e1000_irq_disable - Mask off interrupt generation on the NIC + **/ +static void e1000_irq_disable(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + + if (adapter->ecdev) + return; + + ew32(IMC, ~0); + if (adapter->msix_entries) + ew32(EIAC_82574, 0); + e1e_flush(); + synchronize_irq(adapter->pdev->irq); +} + +/** + * e1000_irq_enable - Enable default interrupt generation settings + **/ +static void e1000_irq_enable(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + + if (adapter->ecdev) + return; + + if (adapter->msix_entries) { + ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574); + ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC); + } else { + ew32(IMS, IMS_ENABLE_MASK); + } + e1e_flush(); +} + +/** + * e1000_get_hw_control - get control of the h/w from f/w + * @adapter: address of board private structure + * + * e1000_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit. + * For ASF and Pass Through versions of f/w this means that + * the driver is loaded. For AMT version (only with 82573) + * of the f/w this means that the network i/f is open. + **/ +static void e1000_get_hw_control(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 ctrl_ext; + u32 swsm; + + /* Let firmware know the driver has taken over */ + if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) { + swsm = er32(SWSM); + ew32(SWSM, swsm | E1000_SWSM_DRV_LOAD); + } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) { + ctrl_ext = er32(CTRL_EXT); + ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_DRV_LOAD); + } +} + +/** + * e1000_release_hw_control - release control of the h/w to f/w + * @adapter: address of board private structure + * + * e1000_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit. + * For ASF and Pass Through versions of f/w this means that the + * driver is no longer loaded. For AMT version (only with 82573) i + * of the f/w this means that the network i/f is closed. + * + **/ +static void e1000_release_hw_control(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 ctrl_ext; + u32 swsm; + + /* Let firmware taken over control of h/w */ + if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) { + swsm = er32(SWSM); + ew32(SWSM, swsm & ~E1000_SWSM_DRV_LOAD); + } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) { + ctrl_ext = er32(CTRL_EXT); + ew32(CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD); + } +} + +/** + * @e1000_alloc_ring - allocate memory for a ring structure + **/ +static int e1000_alloc_ring_dma(struct e1000_adapter *adapter, + struct e1000_ring *ring) +{ + struct pci_dev *pdev = adapter->pdev; + + ring->desc = dma_alloc_coherent(&pdev->dev, ring->size, &ring->dma, + GFP_KERNEL); + if (!ring->desc) + return -ENOMEM; + + return 0; +} + +/** + * e1000e_setup_tx_resources - allocate Tx resources (Descriptors) + * @adapter: board private structure + * + * Return 0 on success, negative on failure + **/ +int e1000e_setup_tx_resources(struct e1000_adapter *adapter) +{ + struct e1000_ring *tx_ring = adapter->tx_ring; + int err = -ENOMEM, size; + + size = sizeof(struct e1000_buffer) * tx_ring->count; + tx_ring->buffer_info = vmalloc(size); + if (!tx_ring->buffer_info) + goto err; + memset(tx_ring->buffer_info, 0, size); + + /* round up to nearest 4K */ + tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc); + tx_ring->size = ALIGN(tx_ring->size, 4096); + + err = e1000_alloc_ring_dma(adapter, tx_ring); + if (err) + goto err; + + tx_ring->next_to_use = 0; + tx_ring->next_to_clean = 0; + + return 0; +err: + vfree(tx_ring->buffer_info); + e_err("Unable to allocate memory for the transmit descriptor ring\n"); + return err; +} + +/** + * e1000e_setup_rx_resources - allocate Rx resources (Descriptors) + * @adapter: board private structure + * + * Returns 0 on success, negative on failure + **/ +int e1000e_setup_rx_resources(struct e1000_adapter *adapter) +{ + struct e1000_ring *rx_ring = adapter->rx_ring; + struct e1000_buffer *buffer_info; + int i, size, desc_len, err = -ENOMEM; + + size = sizeof(struct e1000_buffer) * rx_ring->count; + rx_ring->buffer_info = vmalloc(size); + if (!rx_ring->buffer_info) + goto err; + memset(rx_ring->buffer_info, 0, size); + + for (i = 0; i < rx_ring->count; i++) { + buffer_info = &rx_ring->buffer_info[i]; + buffer_info->ps_pages = kcalloc(PS_PAGE_BUFFERS, + sizeof(struct e1000_ps_page), + GFP_KERNEL); + if (!buffer_info->ps_pages) + goto err_pages; + } + + desc_len = sizeof(union e1000_rx_desc_packet_split); + + /* Round up to nearest 4K */ + rx_ring->size = rx_ring->count * desc_len; + rx_ring->size = ALIGN(rx_ring->size, 4096); + + err = e1000_alloc_ring_dma(adapter, rx_ring); + if (err) + goto err_pages; + + rx_ring->next_to_clean = 0; + rx_ring->next_to_use = 0; + rx_ring->rx_skb_top = NULL; + + return 0; + +err_pages: + for (i = 0; i < rx_ring->count; i++) { + buffer_info = &rx_ring->buffer_info[i]; + kfree(buffer_info->ps_pages); + } +err: + vfree(rx_ring->buffer_info); + e_err("Unable to allocate memory for the transmit descriptor ring\n"); + return err; +} + +/** + * e1000_clean_tx_ring - Free Tx Buffers + * @adapter: board private structure + **/ +static void e1000_clean_tx_ring(struct e1000_adapter *adapter) +{ + struct e1000_ring *tx_ring = adapter->tx_ring; + struct e1000_buffer *buffer_info; + unsigned long size; + unsigned int i; + + for (i = 0; i < tx_ring->count; i++) { + buffer_info = &tx_ring->buffer_info[i]; + e1000_put_txbuf(adapter, buffer_info); + } + + size = sizeof(struct e1000_buffer) * tx_ring->count; + memset(tx_ring->buffer_info, 0, size); + + memset(tx_ring->desc, 0, tx_ring->size); + + tx_ring->next_to_use = 0; + tx_ring->next_to_clean = 0; + + writel(0, adapter->hw.hw_addr + tx_ring->head); + writel(0, adapter->hw.hw_addr + tx_ring->tail); +} + +/** + * e1000e_free_tx_resources - Free Tx Resources per Queue + * @adapter: board private structure + * + * Free all transmit software resources + **/ +void e1000e_free_tx_resources(struct e1000_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + struct e1000_ring *tx_ring = adapter->tx_ring; + + e1000_clean_tx_ring(adapter); + + vfree(tx_ring->buffer_info); + tx_ring->buffer_info = NULL; + + dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc, + tx_ring->dma); + tx_ring->desc = NULL; +} + +/** + * e1000e_free_rx_resources - Free Rx Resources + * @adapter: board private structure + * + * Free all receive software resources + **/ + +void e1000e_free_rx_resources(struct e1000_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + struct e1000_ring *rx_ring = adapter->rx_ring; + int i; + + e1000_clean_rx_ring(adapter); + + for (i = 0; i < rx_ring->count; i++) { + kfree(rx_ring->buffer_info[i].ps_pages); + } + + vfree(rx_ring->buffer_info); + rx_ring->buffer_info = NULL; + + dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc, + rx_ring->dma); + rx_ring->desc = NULL; +} + +/** + * e1000_update_itr - update the dynamic ITR value based on statistics + * @adapter: pointer to adapter + * @itr_setting: current adapter->itr + * @packets: the number of packets during this measurement interval + * @bytes: the number of bytes during this measurement interval + * + * Stores a new ITR value based on packets and byte + * counts during the last interrupt. The advantage of per interrupt + * computation is faster updates and more accurate ITR for the current + * traffic pattern. Constants in this function were computed + * based on theoretical maximum wire speed and thresholds were set based + * on testing data as well as attempting to minimize response time + * while increasing bulk throughput. This functionality is controlled + * by the InterruptThrottleRate module parameter. + **/ +static unsigned int e1000_update_itr(struct e1000_adapter *adapter, + u16 itr_setting, int packets, + int bytes) +{ + unsigned int retval = itr_setting; + + if (packets == 0) + goto update_itr_done; + + switch (itr_setting) { + case lowest_latency: + /* handle TSO and jumbo frames */ + if (bytes/packets > 8000) + retval = bulk_latency; + else if ((packets < 5) && (bytes > 512)) { + retval = low_latency; + } + break; + case low_latency: /* 50 usec aka 20000 ints/s */ + if (bytes > 10000) { + /* this if handles the TSO accounting */ + if (bytes/packets > 8000) { + retval = bulk_latency; + } else if ((packets < 10) || ((bytes/packets) > 1200)) { + retval = bulk_latency; + } else if ((packets > 35)) { + retval = lowest_latency; + } + } else if (bytes/packets > 2000) { + retval = bulk_latency; + } else if (packets <= 2 && bytes < 512) { + retval = lowest_latency; + } + break; + case bulk_latency: /* 250 usec aka 4000 ints/s */ + if (bytes > 25000) { + if (packets > 35) { + retval = low_latency; + } + } else if (bytes < 6000) { + retval = low_latency; + } + break; + } + +update_itr_done: + return retval; +} + +static void e1000_set_itr(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u16 current_itr; + u32 new_itr = adapter->itr; + + /* for non-gigabit speeds, just fix the interrupt rate at 4000 */ + if (adapter->link_speed != SPEED_1000) { + current_itr = 0; + new_itr = 4000; + goto set_itr_now; + } + + adapter->tx_itr = e1000_update_itr(adapter, + adapter->tx_itr, + adapter->total_tx_packets, + adapter->total_tx_bytes); + /* conservative mode (itr 3) eliminates the lowest_latency setting */ + if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency) + adapter->tx_itr = low_latency; + + adapter->rx_itr = e1000_update_itr(adapter, + adapter->rx_itr, + adapter->total_rx_packets, + adapter->total_rx_bytes); + /* conservative mode (itr 3) eliminates the lowest_latency setting */ + if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency) + adapter->rx_itr = low_latency; + + current_itr = max(adapter->rx_itr, adapter->tx_itr); + + switch (current_itr) { + /* counts and packets in update_itr are dependent on these numbers */ + case lowest_latency: + new_itr = 70000; + break; + case low_latency: + new_itr = 20000; /* aka hwitr = ~200 */ + break; + case bulk_latency: + new_itr = 4000; + break; + default: + break; + } + +set_itr_now: + if (new_itr != adapter->itr) { + /* + * this attempts to bias the interrupt rate towards Bulk + * by adding intermediate steps when interrupt rate is + * increasing + */ + new_itr = new_itr > adapter->itr ? + min(adapter->itr + (new_itr >> 2), new_itr) : + new_itr; + adapter->itr = new_itr; + adapter->rx_ring->itr_val = new_itr; + if (adapter->msix_entries) + adapter->rx_ring->set_itr = 1; + else + ew32(ITR, 1000000000 / (new_itr * 256)); + } +} + +/** + * e1000_alloc_queues - Allocate memory for all rings + * @adapter: board private structure to initialize + **/ +static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter) +{ + adapter->tx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL); + if (!adapter->tx_ring) + goto err; + + adapter->rx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL); + if (!adapter->rx_ring) + goto err; + + return 0; +err: + e_err("Unable to allocate memory for queues\n"); + kfree(adapter->rx_ring); + kfree(adapter->tx_ring); + return -ENOMEM; +} + +/** + * e1000_clean - NAPI Rx polling callback + * @napi: struct associated with this polling callback + * @budget: amount of packets driver is allowed to process this poll + **/ +static int e1000_clean(struct napi_struct *napi, int budget) +{ + struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi); + struct e1000_hw *hw = &adapter->hw; + struct net_device *poll_dev = adapter->netdev; + int tx_cleaned = 1, work_done = 0; + + adapter = netdev_priv(poll_dev); + + if (adapter->msix_entries && + !(adapter->rx_ring->ims_val & adapter->tx_ring->ims_val)) + goto clean_rx; + + tx_cleaned = e1000_clean_tx_irq(adapter); + +clean_rx: + adapter->clean_rx(adapter, &work_done, budget); + + if (!tx_cleaned) + work_done = budget; + + /* If budget not fully consumed, exit the polling mode */ + if (work_done < budget) { + if (adapter->itr_setting & 3) + e1000_set_itr(adapter); + napi_complete(napi); + if (!test_bit(__E1000_DOWN, &adapter->state)) { + if (adapter->msix_entries) + ew32(IMS, adapter->rx_ring->ims_val); + else + e1000_irq_enable(adapter); + } + } + + return work_done; +} + +static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 vfta, index; + + /* don't update vlan cookie if already programmed */ + if ((adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN) && + (vid == adapter->mng_vlan_id)) + return; + + /* add VID to filter table */ + if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) { + index = (vid >> 5) & 0x7F; + vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index); + vfta |= (1 << (vid & 0x1F)); + hw->mac.ops.write_vfta(hw, index, vfta); + } +} + +static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 vfta, index; + + if (!test_bit(__E1000_DOWN, &adapter->state)) + e1000_irq_disable(adapter); + vlan_group_set_device(adapter->vlgrp, vid, NULL); + + if (!test_bit(__E1000_DOWN, &adapter->state)) + e1000_irq_enable(adapter); + + if ((adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN) && + (vid == adapter->mng_vlan_id)) { + /* release control to f/w */ + e1000_release_hw_control(adapter); + return; + } + + /* remove VID from filter table */ + if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) { + index = (vid >> 5) & 0x7F; + vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index); + vfta &= ~(1 << (vid & 0x1F)); + hw->mac.ops.write_vfta(hw, index, vfta); + } +} + +static void e1000_update_mng_vlan(struct e1000_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + u16 vid = adapter->hw.mng_cookie.vlan_id; + u16 old_vid = adapter->mng_vlan_id; + + if (!adapter->vlgrp) + return; + + if (!vlan_group_get_device(adapter->vlgrp, vid)) { + adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; + if (adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN) { + e1000_vlan_rx_add_vid(netdev, vid); + adapter->mng_vlan_id = vid; + } + + if ((old_vid != (u16)E1000_MNG_VLAN_NONE) && + (vid != old_vid) && + !vlan_group_get_device(adapter->vlgrp, old_vid)) + e1000_vlan_rx_kill_vid(netdev, old_vid); + } else { + adapter->mng_vlan_id = vid; + } +} + + +static void e1000_vlan_rx_register(struct net_device *netdev, + struct vlan_group *grp) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 ctrl, rctl; + + if (!test_bit(__E1000_DOWN, &adapter->state)) + e1000_irq_disable(adapter); + adapter->vlgrp = grp; + + if (grp) { + /* enable VLAN tag insert/strip */ + ctrl = er32(CTRL); + ctrl |= E1000_CTRL_VME; + ew32(CTRL, ctrl); + + if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) { + /* enable VLAN receive filtering */ + rctl = er32(RCTL); + rctl &= ~E1000_RCTL_CFIEN; + ew32(RCTL, rctl); + e1000_update_mng_vlan(adapter); + } + } else { + /* disable VLAN tag insert/strip */ + ctrl = er32(CTRL); + ctrl &= ~E1000_CTRL_VME; + ew32(CTRL, ctrl); + + if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) { + if (adapter->mng_vlan_id != + (u16)E1000_MNG_VLAN_NONE) { + e1000_vlan_rx_kill_vid(netdev, + adapter->mng_vlan_id); + adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; + } + } + } + + if (!test_bit(__E1000_DOWN, &adapter->state)) + e1000_irq_enable(adapter); +} + +static void e1000_restore_vlan(struct e1000_adapter *adapter) +{ + u16 vid; + + e1000_vlan_rx_register(adapter->netdev, adapter->vlgrp); + + if (!adapter->vlgrp) + return; + + for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) { + if (!vlan_group_get_device(adapter->vlgrp, vid)) + continue; + e1000_vlan_rx_add_vid(adapter->netdev, vid); + } +} + +static void e1000_init_manageability_pt(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 manc, manc2h, mdef, i, j; + + if (!(adapter->flags & FLAG_MNG_PT_ENABLED)) + return; + + manc = er32(MANC); + + /* + * enable receiving management packets to the host. this will probably + * generate destination unreachable messages from the host OS, but + * the packets will be handled on SMBUS + */ + manc |= E1000_MANC_EN_MNG2HOST; + manc2h = er32(MANC2H); + + switch (hw->mac.type) { + default: + manc2h |= (E1000_MANC2H_PORT_623 | E1000_MANC2H_PORT_664); + break; + case e1000_82574: + case e1000_82583: + /* + * Check if IPMI pass-through decision filter already exists; + * if so, enable it. + */ + for (i = 0, j = 0; i < 8; i++) { + mdef = er32(MDEF(i)); + + /* Ignore filters with anything other than IPMI ports */ + if (mdef & ~(E1000_MDEF_PORT_623 | E1000_MDEF_PORT_664)) + continue; + + /* Enable this decision filter in MANC2H */ + if (mdef) + manc2h |= (1 << i); + + j |= mdef; + } + + if (j == (E1000_MDEF_PORT_623 | E1000_MDEF_PORT_664)) + break; + + /* Create new decision filter in an empty filter */ + for (i = 0, j = 0; i < 8; i++) + if (er32(MDEF(i)) == 0) { + ew32(MDEF(i), (E1000_MDEF_PORT_623 | + E1000_MDEF_PORT_664)); + manc2h |= (1 << 1); + j++; + break; + } + + if (!j) + e_warn("Unable to create IPMI pass-through filter\n"); + break; + } + + ew32(MANC2H, manc2h); + ew32(MANC, manc); +} + +/** + * e1000_configure_tx - Configure 8254x Transmit Unit after Reset + * @adapter: board private structure + * + * Configure the Tx unit of the MAC after a reset. + **/ +static void e1000_configure_tx(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct e1000_ring *tx_ring = adapter->tx_ring; + u64 tdba; + u32 tdlen, tctl, tipg, tarc; + u32 ipgr1, ipgr2; + + /* Setup the HW Tx Head and Tail descriptor pointers */ + tdba = tx_ring->dma; + tdlen = tx_ring->count * sizeof(struct e1000_tx_desc); + ew32(TDBAL, (tdba & DMA_BIT_MASK(32))); + ew32(TDBAH, (tdba >> 32)); + ew32(TDLEN, tdlen); + ew32(TDH, 0); + ew32(TDT, 0); + tx_ring->head = E1000_TDH; + tx_ring->tail = E1000_TDT; + + /* Set the default values for the Tx Inter Packet Gap timer */ + tipg = DEFAULT_82543_TIPG_IPGT_COPPER; /* 8 */ + ipgr1 = DEFAULT_82543_TIPG_IPGR1; /* 8 */ + ipgr2 = DEFAULT_82543_TIPG_IPGR2; /* 6 */ + + if (adapter->flags & FLAG_TIPG_MEDIUM_FOR_80003ESLAN) + ipgr2 = DEFAULT_80003ES2LAN_TIPG_IPGR2; /* 7 */ + + tipg |= ipgr1 << E1000_TIPG_IPGR1_SHIFT; + tipg |= ipgr2 << E1000_TIPG_IPGR2_SHIFT; + ew32(TIPG, tipg); + + /* Set the Tx Interrupt Delay register */ + ew32(TIDV, adapter->tx_int_delay); + /* Tx irq moderation */ + ew32(TADV, adapter->tx_abs_int_delay); + + /* Program the Transmit Control Register */ + tctl = er32(TCTL); + tctl &= ~E1000_TCTL_CT; + tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC | + (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT); + + if (adapter->flags & FLAG_TARC_SPEED_MODE_BIT) { + tarc = er32(TARC(0)); + /* + * set the speed mode bit, we'll clear it if we're not at + * gigabit link later + */ +#define SPEED_MODE_BIT (1 << 21) + tarc |= SPEED_MODE_BIT; + ew32(TARC(0), tarc); + } + + /* errata: program both queues to unweighted RR */ + if (adapter->flags & FLAG_TARC_SET_BIT_ZERO) { + tarc = er32(TARC(0)); + tarc |= 1; + ew32(TARC(0), tarc); + tarc = er32(TARC(1)); + tarc |= 1; + ew32(TARC(1), tarc); + } + + /* Setup Transmit Descriptor Settings for eop descriptor */ + adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS; + + /* only set IDE if we are delaying interrupts using the timers */ + if (adapter->tx_int_delay) + adapter->txd_cmd |= E1000_TXD_CMD_IDE; + + /* enable Report Status bit */ + adapter->txd_cmd |= E1000_TXD_CMD_RS; + + ew32(TCTL, tctl); + + e1000e_config_collision_dist(hw); +} + +/** + * e1000_setup_rctl - configure the receive control registers + * @adapter: Board private structure + **/ +#define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \ + (((S) & (PAGE_SIZE - 1)) ? 1 : 0)) +static void e1000_setup_rctl(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 rctl, rfctl; + u32 psrctl = 0; + u32 pages = 0; + + /* Program MC offset vector base */ + rctl = er32(RCTL); + rctl &= ~(3 << E1000_RCTL_MO_SHIFT); + rctl |= E1000_RCTL_EN | E1000_RCTL_BAM | + E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF | + (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT); + + /* Do not Store bad packets */ + rctl &= ~E1000_RCTL_SBP; + + /* Enable Long Packet receive */ + if (adapter->netdev->mtu <= ETH_DATA_LEN) + rctl &= ~E1000_RCTL_LPE; + else + rctl |= E1000_RCTL_LPE; + + /* Some systems expect that the CRC is included in SMBUS traffic. The + * hardware strips the CRC before sending to both SMBUS (BMC) and to + * host memory when this is enabled + */ + if (adapter->flags2 & FLAG2_CRC_STRIPPING) + rctl |= E1000_RCTL_SECRC; + + /* Workaround Si errata on 82577 PHY - configure IPG for jumbos */ + if ((hw->phy.type == e1000_phy_82577) && (rctl & E1000_RCTL_LPE)) { + u16 phy_data; + + e1e_rphy(hw, PHY_REG(770, 26), &phy_data); + phy_data &= 0xfff8; + phy_data |= (1 << 2); + e1e_wphy(hw, PHY_REG(770, 26), phy_data); + + e1e_rphy(hw, 22, &phy_data); + phy_data &= 0x0fff; + phy_data |= (1 << 14); + e1e_wphy(hw, 0x10, 0x2823); + e1e_wphy(hw, 0x11, 0x0003); + e1e_wphy(hw, 22, phy_data); + } + + /* Setup buffer sizes */ + rctl &= ~E1000_RCTL_SZ_4096; + rctl |= E1000_RCTL_BSEX; + switch (adapter->rx_buffer_len) { + case 2048: + default: + rctl |= E1000_RCTL_SZ_2048; + rctl &= ~E1000_RCTL_BSEX; + break; + case 4096: + rctl |= E1000_RCTL_SZ_4096; + break; + case 8192: + rctl |= E1000_RCTL_SZ_8192; + break; + case 16384: + rctl |= E1000_RCTL_SZ_16384; + break; + } + + /* + * 82571 and greater support packet-split where the protocol + * header is placed in skb->data and the packet data is + * placed in pages hanging off of skb_shinfo(skb)->nr_frags. + * In the case of a non-split, skb->data is linearly filled, + * followed by the page buffers. Therefore, skb->data is + * sized to hold the largest protocol header. + * + * allocations using alloc_page take too long for regular MTU + * so only enable packet split for jumbo frames + * + * Using pages when the page size is greater than 16k wastes + * a lot of memory, since we allocate 3 pages at all times + * per packet. + */ + pages = PAGE_USE_COUNT(adapter->netdev->mtu); + if (!(adapter->flags & FLAG_IS_ICH) && (pages <= 3) && + (PAGE_SIZE <= 16384) && (rctl & E1000_RCTL_LPE)) + adapter->rx_ps_pages = pages; + else + adapter->rx_ps_pages = 0; + + if (adapter->rx_ps_pages) { + /* Configure extra packet-split registers */ + rfctl = er32(RFCTL); + rfctl |= E1000_RFCTL_EXTEN; + /* + * disable packet split support for IPv6 extension headers, + * because some malformed IPv6 headers can hang the Rx + */ + rfctl |= (E1000_RFCTL_IPV6_EX_DIS | + E1000_RFCTL_NEW_IPV6_EXT_DIS); + + ew32(RFCTL, rfctl); + + /* Enable Packet split descriptors */ + rctl |= E1000_RCTL_DTYP_PS; + + psrctl |= adapter->rx_ps_bsize0 >> + E1000_PSRCTL_BSIZE0_SHIFT; + + switch (adapter->rx_ps_pages) { + case 3: + psrctl |= PAGE_SIZE << + E1000_PSRCTL_BSIZE3_SHIFT; + case 2: + psrctl |= PAGE_SIZE << + E1000_PSRCTL_BSIZE2_SHIFT; + case 1: + psrctl |= PAGE_SIZE >> + E1000_PSRCTL_BSIZE1_SHIFT; + break; + } + + ew32(PSRCTL, psrctl); + } + + ew32(RCTL, rctl); + /* just started the receive unit, no need to restart */ + adapter->flags &= ~FLAG_RX_RESTART_NOW; +} + +/** + * e1000_configure_rx - Configure Receive Unit after Reset + * @adapter: board private structure + * + * Configure the Rx unit of the MAC after a reset. + **/ +static void e1000_configure_rx(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct e1000_ring *rx_ring = adapter->rx_ring; + u64 rdba; + u32 rdlen, rctl, rxcsum, ctrl_ext; + + if (adapter->rx_ps_pages) { + /* this is a 32 byte descriptor */ + rdlen = rx_ring->count * + sizeof(union e1000_rx_desc_packet_split); + adapter->clean_rx = e1000_clean_rx_irq_ps; + adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps; + } else if (adapter->netdev->mtu > ETH_FRAME_LEN + ETH_FCS_LEN) { + rdlen = rx_ring->count * sizeof(struct e1000_rx_desc); + adapter->clean_rx = e1000_clean_jumbo_rx_irq; + adapter->alloc_rx_buf = e1000_alloc_jumbo_rx_buffers; + } else { + rdlen = rx_ring->count * sizeof(struct e1000_rx_desc); + adapter->clean_rx = e1000_clean_rx_irq; + adapter->alloc_rx_buf = e1000_alloc_rx_buffers; + } + + /* disable receives while setting up the descriptors */ + rctl = er32(RCTL); + ew32(RCTL, rctl & ~E1000_RCTL_EN); + e1e_flush(); + msleep(10); + + /* set the Receive Delay Timer Register */ + ew32(RDTR, adapter->rx_int_delay); + + /* irq moderation */ + ew32(RADV, adapter->rx_abs_int_delay); + if (adapter->itr_setting != 0) + ew32(ITR, 1000000000 / (adapter->itr * 256)); + + ctrl_ext = er32(CTRL_EXT); + /* Auto-Mask interrupts upon ICR access */ + ctrl_ext |= E1000_CTRL_EXT_IAME; + ew32(IAM, 0xffffffff); + ew32(CTRL_EXT, ctrl_ext); + e1e_flush(); + + /* + * Setup the HW Rx Head and Tail Descriptor Pointers and + * the Base and Length of the Rx Descriptor Ring + */ + rdba = rx_ring->dma; + ew32(RDBAL, (rdba & DMA_BIT_MASK(32))); + ew32(RDBAH, (rdba >> 32)); + ew32(RDLEN, rdlen); + ew32(RDH, 0); + ew32(RDT, 0); + rx_ring->head = E1000_RDH; + rx_ring->tail = E1000_RDT; + + /* Enable Receive Checksum Offload for TCP and UDP */ + rxcsum = er32(RXCSUM); + if (adapter->flags & FLAG_RX_CSUM_ENABLED) { + rxcsum |= E1000_RXCSUM_TUOFL; + + /* + * IPv4 payload checksum for UDP fragments must be + * used in conjunction with packet-split. + */ + if (adapter->rx_ps_pages) + rxcsum |= E1000_RXCSUM_IPPCSE; + } else { + rxcsum &= ~E1000_RXCSUM_TUOFL; + /* no need to clear IPPCSE as it defaults to 0 */ + } + ew32(RXCSUM, rxcsum); + + /* + * Enable early receives on supported devices, only takes effect when + * packet size is equal or larger than the specified value (in 8 byte + * units), e.g. using jumbo frames when setting to E1000_ERT_2048 + */ + if (adapter->flags & FLAG_HAS_ERT) { + if (adapter->netdev->mtu > ETH_DATA_LEN) { + u32 rxdctl = er32(RXDCTL(0)); + ew32(RXDCTL(0), rxdctl | 0x3); + ew32(ERT, E1000_ERT_2048 | (1 << 13)); + /* + * With jumbo frames and early-receive enabled, + * excessive C-state transition latencies result in + * dropped transactions. + */ + pm_qos_update_request( + adapter->netdev->pm_qos_req, 55); + } else { + pm_qos_update_request( + adapter->netdev->pm_qos_req, + PM_QOS_DEFAULT_VALUE); + } + } + + /* Enable Receives */ + ew32(RCTL, rctl); +} + +/** + * e1000_update_mc_addr_list - Update Multicast addresses + * @hw: pointer to the HW structure + * @mc_addr_list: array of multicast addresses to program + * @mc_addr_count: number of multicast addresses to program + * + * Updates the Multicast Table Array. + * The caller must have a packed mc_addr_list of multicast addresses. + **/ +static void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list, + u32 mc_addr_count) +{ + hw->mac.ops.update_mc_addr_list(hw, mc_addr_list, mc_addr_count); +} + +/** + * e1000_set_multi - Multicast and Promiscuous mode set + * @netdev: network interface device structure + * + * The set_multi entry point is called whenever the multicast address + * list or the network interface flags are updated. This routine is + * responsible for configuring the hardware for proper multicast, + * promiscuous mode, and all-multi behavior. + **/ +static void e1000_set_multi(struct net_device *netdev) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + struct netdev_hw_addr *ha; + u8 *mta_list; + u32 rctl; + int i; + + /* Check for Promiscuous and All Multicast modes */ + + rctl = er32(RCTL); + + if (netdev->flags & IFF_PROMISC) { + rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE); + rctl &= ~E1000_RCTL_VFE; + } else { + if (netdev->flags & IFF_ALLMULTI) { + rctl |= E1000_RCTL_MPE; + rctl &= ~E1000_RCTL_UPE; + } else { + rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE); + } + if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) + rctl |= E1000_RCTL_VFE; + } + + ew32(RCTL, rctl); + + if (!netdev_mc_empty(netdev)) { + mta_list = kmalloc(netdev_mc_count(netdev) * 6, GFP_ATOMIC); + if (!mta_list) + return; + + /* prepare a packed array of only addresses. */ + i = 0; + netdev_for_each_mc_addr(ha, netdev) + memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN); + + e1000_update_mc_addr_list(hw, mta_list, i); + kfree(mta_list); + } else { + /* + * if we're called from probe, we might not have + * anything to do here, so clear out the list + */ + e1000_update_mc_addr_list(hw, NULL, 0); + } +} + +/** + * e1000_configure - configure the hardware for Rx and Tx + * @adapter: private board structure + **/ +static void e1000_configure(struct e1000_adapter *adapter) +{ + e1000_set_multi(adapter->netdev); + + e1000_restore_vlan(adapter); + e1000_init_manageability_pt(adapter); + + e1000_configure_tx(adapter); + e1000_setup_rctl(adapter); + e1000_configure_rx(adapter); + + if (adapter->ecdev) { + adapter->alloc_rx_buf(adapter, adapter->rx_ring->count); + } else { + adapter->alloc_rx_buf(adapter, e1000_desc_unused(adapter->rx_ring)); + } +} + +/** + * e1000e_power_up_phy - restore link in case the phy was powered down + * @adapter: address of board private structure + * + * The phy may be powered down to save power and turn off link when the + * driver is unloaded and wake on lan is not enabled (among others) + * *** this routine MUST be followed by a call to e1000e_reset *** + **/ +void e1000e_power_up_phy(struct e1000_adapter *adapter) +{ + if (adapter->hw.phy.ops.power_up) + adapter->hw.phy.ops.power_up(&adapter->hw); + + adapter->hw.mac.ops.setup_link(&adapter->hw); +} + +/** + * e1000_power_down_phy - Power down the PHY + * + * Power down the PHY so no link is implied when interface is down. + * The PHY cannot be powered down if management or WoL is active. + */ +static void e1000_power_down_phy(struct e1000_adapter *adapter) +{ + /* WoL is enabled */ + if (adapter->wol) + return; + + if (adapter->hw.phy.ops.power_down) + adapter->hw.phy.ops.power_down(&adapter->hw); +} + +/** + * e1000e_reset - bring the hardware into a known good state + * + * This function boots the hardware and enables some settings that + * require a configuration cycle of the hardware - those cannot be + * set/changed during runtime. After reset the device needs to be + * properly configured for Rx, Tx etc. + */ +void e1000e_reset(struct e1000_adapter *adapter) +{ + struct e1000_mac_info *mac = &adapter->hw.mac; + struct e1000_fc_info *fc = &adapter->hw.fc; + struct e1000_hw *hw = &adapter->hw; + u32 tx_space, min_tx_space, min_rx_space; + u32 pba = adapter->pba; + u16 hwm; + + /* reset Packet Buffer Allocation to default */ + ew32(PBA, pba); + + if (adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) { + /* + * To maintain wire speed transmits, the Tx FIFO should be + * large enough to accommodate two full transmit packets, + * rounded up to the next 1KB and expressed in KB. Likewise, + * the Rx FIFO should be large enough to accommodate at least + * one full receive packet and is similarly rounded up and + * expressed in KB. + */ + pba = er32(PBA); + /* upper 16 bits has Tx packet buffer allocation size in KB */ + tx_space = pba >> 16; + /* lower 16 bits has Rx packet buffer allocation size in KB */ + pba &= 0xffff; + /* + * the Tx fifo also stores 16 bytes of information about the tx + * but don't include ethernet FCS because hardware appends it + */ + min_tx_space = (adapter->max_frame_size + + sizeof(struct e1000_tx_desc) - + ETH_FCS_LEN) * 2; + min_tx_space = ALIGN(min_tx_space, 1024); + min_tx_space >>= 10; + /* software strips receive CRC, so leave room for it */ + min_rx_space = adapter->max_frame_size; + min_rx_space = ALIGN(min_rx_space, 1024); + min_rx_space >>= 10; + + /* + * If current Tx allocation is less than the min Tx FIFO size, + * and the min Tx FIFO size is less than the current Rx FIFO + * allocation, take space away from current Rx allocation + */ + if ((tx_space < min_tx_space) && + ((min_tx_space - tx_space) < pba)) { + pba -= min_tx_space - tx_space; + + /* + * if short on Rx space, Rx wins and must trump tx + * adjustment or use Early Receive if available + */ + if ((pba < min_rx_space) && + (!(adapter->flags & FLAG_HAS_ERT))) + /* ERT enabled in e1000_configure_rx */ + pba = min_rx_space; + } + + ew32(PBA, pba); + } + + + /* + * flow control settings + * + * The high water mark must be low enough to fit one full frame + * (or the size used for early receive) above it in the Rx FIFO. + * Set it to the lower of: + * - 90% of the Rx FIFO size, and + * - the full Rx FIFO size minus the early receive size (for parts + * with ERT support assuming ERT set to E1000_ERT_2048), or + * - the full Rx FIFO size minus one full frame + */ + if (hw->mac.type == e1000_pchlan) { + /* + * Workaround PCH LOM adapter hangs with certain network + * loads. If hangs persist, try disabling Tx flow control. + */ + if (adapter->netdev->mtu > ETH_DATA_LEN) { + fc->high_water = 0x3500; + fc->low_water = 0x1500; + } else { + fc->high_water = 0x5000; + fc->low_water = 0x3000; + } + fc->refresh_time = 0x1000; + } else { + if ((adapter->flags & FLAG_HAS_ERT) && + (adapter->netdev->mtu > ETH_DATA_LEN)) + hwm = min(((pba << 10) * 9 / 10), + ((pba << 10) - (E1000_ERT_2048 << 3))); + else + hwm = min(((pba << 10) * 9 / 10), + ((pba << 10) - adapter->max_frame_size)); + + fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */ + fc->low_water = fc->high_water - 8; + } + + if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME) + fc->pause_time = 0xFFFF; + else + fc->pause_time = E1000_FC_PAUSE_TIME; + fc->send_xon = 1; + fc->current_mode = fc->requested_mode; + + /* Allow time for pending master requests to run */ + mac->ops.reset_hw(hw); + + /* + * For parts with AMT enabled, let the firmware know + * that the network interface is in control + */ + if (adapter->flags & FLAG_HAS_AMT) + e1000_get_hw_control(adapter); + + ew32(WUC, 0); + if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) + e1e_wphy(&adapter->hw, BM_WUC, 0); + + if (mac->ops.init_hw(hw)) + e_err("Hardware Error\n"); + + e1000_update_mng_vlan(adapter); + + /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */ + ew32(VET, ETH_P_8021Q); + + e1000e_reset_adaptive(hw); + e1000_get_phy_info(hw); + + if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) && + !(adapter->flags & FLAG_SMART_POWER_DOWN)) { + u16 phy_data = 0; + /* + * speed up time to link by disabling smart power down, ignore + * the return value of this function because there is nothing + * different we would do if it failed + */ + e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data); + phy_data &= ~IGP02E1000_PM_SPD; + e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, phy_data); + } +} + +int e1000e_up(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + + /* DMA latency requirement to workaround early-receive/jumbo issue */ + if (adapter->flags & FLAG_HAS_ERT) + adapter->netdev->pm_qos_req = + pm_qos_add_request(PM_QOS_CPU_DMA_LATENCY, + PM_QOS_DEFAULT_VALUE); + + /* hardware has been reset, we need to reload some things */ + e1000_configure(adapter); + + clear_bit(__E1000_DOWN, &adapter->state); + + if (!adapter->ecdev) { + napi_enable(&adapter->napi); + } + + if (adapter->msix_entries) + e1000_configure_msix(adapter); + if (!adapter->ecdev) { + e1000_irq_enable(adapter); + + netif_wake_queue(adapter->netdev); + + /* fire a link change interrupt to start the watchdog */ + if (adapter->msix_entries) + ew32(ICS, E1000_ICS_LSC | E1000_ICR_OTHER); + else + ew32(ICS, E1000_ICS_LSC); + } + + return 0; +} + +void e1000e_down(struct e1000_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct e1000_hw *hw = &adapter->hw; + u32 tctl, rctl; + + /* + * signal that we're down so the interrupt handler does not + * reschedule our watchdog timer + */ + set_bit(__E1000_DOWN, &adapter->state); + + /* disable receives in the hardware */ + rctl = er32(RCTL); + ew32(RCTL, rctl & ~E1000_RCTL_EN); + /* flush and sleep below */ + + if (!adapter->ecdev) + netif_stop_queue(netdev); + + /* disable transmits in the hardware */ + tctl = er32(TCTL); + tctl &= ~E1000_TCTL_EN; + ew32(TCTL, tctl); + /* flush both disables and wait for them to finish */ + e1e_flush(); + msleep(10); + + if (!adapter->ecdev) { + napi_disable(&adapter->napi); + e1000_irq_disable(adapter); + del_timer_sync(&adapter->watchdog_timer); + del_timer_sync(&adapter->phy_info_timer); + } + + if (adapter->ecdev) { + ecdev_set_link(adapter->ecdev, 0); + } else { + netif_carrier_off(netdev); + } + adapter->link_speed = 0; + adapter->link_duplex = 0; + + if (!pci_channel_offline(adapter->pdev)) + e1000e_reset(adapter); + e1000_clean_tx_ring(adapter); + e1000_clean_rx_ring(adapter); + + if (adapter->flags & FLAG_HAS_ERT) { + pm_qos_remove_request( + adapter->netdev->pm_qos_req); + adapter->netdev->pm_qos_req = NULL; + } + + /* + * TODO: for power management, we could drop the link and + * pci_disable_device here. + */ +} + +void e1000e_reinit_locked(struct e1000_adapter *adapter) +{ + might_sleep(); + while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) + msleep(1); + e1000e_down(adapter); + e1000e_up(adapter); + clear_bit(__E1000_RESETTING, &adapter->state); +} + +/** + * e1000_sw_init - Initialize general software structures (struct e1000_adapter) + * @adapter: board private structure to initialize + * + * e1000_sw_init initializes the Adapter private data structure. + * Fields are initialized based on PCI device information and + * OS network device settings (MTU size). + **/ +static int __devinit e1000_sw_init(struct e1000_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + + adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN; + adapter->rx_ps_bsize0 = 128; + adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN; + adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN; + + e1000e_set_interrupt_capability(adapter); + + if (e1000_alloc_queues(adapter)) + return -ENOMEM; + + /* Explicitly disable IRQ since the NIC can be in any state. */ + e1000_irq_disable(adapter); + + set_bit(__E1000_DOWN, &adapter->state); + return 0; +} + +/** + * e1000_intr_msi_test - Interrupt Handler + * @irq: interrupt number + * @data: pointer to a network interface device structure + **/ +static irqreturn_t e1000_intr_msi_test(int irq, void *data) +{ + struct net_device *netdev = data; + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 icr = er32(ICR); + + e_dbg("icr is %08X\n", icr); + if (icr & E1000_ICR_RXSEQ) { + adapter->flags &= ~FLAG_MSI_TEST_FAILED; + wmb(); + } + + return IRQ_HANDLED; +} + +/** + * e1000_test_msi_interrupt - Returns 0 for successful test + * @adapter: board private struct + * + * code flow taken from tg3.c + **/ +static int e1000_test_msi_interrupt(struct e1000_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct e1000_hw *hw = &adapter->hw; + int err; + + /* poll_enable hasn't been called yet, so don't need disable */ + /* clear any pending events */ + er32(ICR); + + /* free the real vector and request a test handler */ + e1000_free_irq(adapter); + e1000e_reset_interrupt_capability(adapter); + + /* Assume that the test fails, if it succeeds then the test + * MSI irq handler will unset this flag */ + adapter->flags |= FLAG_MSI_TEST_FAILED; + + err = pci_enable_msi(adapter->pdev); + if (err) + goto msi_test_failed; + + err = request_irq(adapter->pdev->irq, e1000_intr_msi_test, 0, + netdev->name, netdev); + if (err) { + pci_disable_msi(adapter->pdev); + goto msi_test_failed; + } + + wmb(); + + e1000_irq_enable(adapter); + + /* fire an unusual interrupt on the test handler */ + ew32(ICS, E1000_ICS_RXSEQ); + e1e_flush(); + msleep(50); + + e1000_irq_disable(adapter); + + rmb(); + + if (adapter->flags & FLAG_MSI_TEST_FAILED) { + adapter->int_mode = E1000E_INT_MODE_LEGACY; + err = -EIO; + e_info("MSI interrupt test failed!\n"); + } + + free_irq(adapter->pdev->irq, netdev); + pci_disable_msi(adapter->pdev); + + if (err == -EIO) + goto msi_test_failed; + + /* okay so the test worked, restore settings */ + e_dbg("MSI interrupt test succeeded!\n"); +msi_test_failed: + e1000e_set_interrupt_capability(adapter); + e1000_request_irq(adapter); + return err; +} + +/** + * e1000_test_msi - Returns 0 if MSI test succeeds or INTx mode is restored + * @adapter: board private struct + * + * code flow taken from tg3.c, called with e1000 interrupts disabled. + **/ +static int e1000_test_msi(struct e1000_adapter *adapter) +{ + int err; + u16 pci_cmd; + + if (!(adapter->flags & FLAG_MSI_ENABLED)) + return 0; + + /* disable SERR in case the MSI write causes a master abort */ + pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd); + if (pci_cmd & PCI_COMMAND_SERR) + pci_write_config_word(adapter->pdev, PCI_COMMAND, + pci_cmd & ~PCI_COMMAND_SERR); + + err = e1000_test_msi_interrupt(adapter); + + /* re-enable SERR */ + if (pci_cmd & PCI_COMMAND_SERR) { + pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd); + pci_cmd |= PCI_COMMAND_SERR; + pci_write_config_word(adapter->pdev, PCI_COMMAND, pci_cmd); + } + + /* success ! */ + if (!err) + return 0; + + /* EIO means MSI test failed */ + if (err != -EIO) + return err; + + /* back to INTx mode */ + e_warn("MSI interrupt test failed, using legacy interrupt.\n"); + + e1000_free_irq(adapter); + + err = e1000_request_irq(adapter); + + return err; +} + +/** + * e1000_open - Called when a network interface is made active + * @netdev: network interface device structure + * + * Returns 0 on success, negative value on failure + * + * The open entry point is called when a network interface is made + * active by the system (IFF_UP). At this point all resources needed + * for transmit and receive operations are allocated, the interrupt + * handler is registered with the OS, the watchdog timer is started, + * and the stack is notified that the interface is ready. + **/ +static int e1000_open(struct net_device *netdev) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + struct pci_dev *pdev = adapter->pdev; + int err; + + /* disallow open during test */ + if (test_bit(__E1000_TESTING, &adapter->state)) + return -EBUSY; + + pm_runtime_get_sync(&pdev->dev); + + if (adapter->ecdev) { + ecdev_set_link(adapter->ecdev, 0); + } else { + netif_carrier_off(netdev); + } + + /* allocate transmit descriptors */ + err = e1000e_setup_tx_resources(adapter); + if (err) + goto err_setup_tx; + + /* allocate receive descriptors */ + err = e1000e_setup_rx_resources(adapter); + if (err) + goto err_setup_rx; + + /* + * If AMT is enabled, let the firmware know that the network + * interface is now open and reset the part to a known state. + */ + if (adapter->flags & FLAG_HAS_AMT) { + e1000_get_hw_control(adapter); + e1000e_reset(adapter); + } + + e1000e_power_up_phy(adapter); + + adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; + if ((adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN)) + e1000_update_mng_vlan(adapter); + + /* + * before we allocate an interrupt, we must be ready to handle it. + * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt + * as soon as we call pci_request_irq, so we have to setup our + * clean_rx handler before we do so. + */ + e1000_configure(adapter); + + err = e1000_request_irq(adapter); + if (err) + goto err_req_irq; + + /* + * Work around PCIe errata with MSI interrupts causing some chipsets to + * ignore e1000e MSI messages, which means we need to test our MSI + * interrupt now + */ + if (adapter->int_mode != E1000E_INT_MODE_LEGACY) { + err = e1000_test_msi(adapter); + if (err) { + e_err("Interrupt allocation failed\n"); + goto err_req_irq; + } + } + + /* From here on the code is the same as e1000e_up() */ + clear_bit(__E1000_DOWN, &adapter->state); + + napi_enable(&adapter->napi); + + e1000_irq_enable(adapter); + + netif_start_queue(netdev); + + adapter->idle_check = true; + pm_runtime_put(&pdev->dev); + + /* fire a link status change interrupt to start the watchdog */ + if (adapter->msix_entries) + ew32(ICS, E1000_ICS_LSC | E1000_ICR_OTHER); + else + ew32(ICS, E1000_ICS_LSC); + + return 0; + +err_req_irq: + e1000_release_hw_control(adapter); + e1000_power_down_phy(adapter); + e1000e_free_rx_resources(adapter); +err_setup_rx: + e1000e_free_tx_resources(adapter); +err_setup_tx: + e1000e_reset(adapter); + pm_runtime_put_sync(&pdev->dev); + + return err; +} + +/** + * e1000_close - Disables a network interface + * @netdev: network interface device structure + * + * Returns 0, this is not allowed to fail + * + * The close entry point is called when an interface is de-activated + * by the OS. The hardware is still under the drivers control, but + * needs to be disabled. A global MAC reset is issued to stop the + * hardware, and all transmit and receive resources are freed. + **/ +static int e1000_close(struct net_device *netdev) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct pci_dev *pdev = adapter->pdev; + + WARN_ON(test_bit(__E1000_RESETTING, &adapter->state)); + + pm_runtime_get_sync(&pdev->dev); + + if (!test_bit(__E1000_DOWN, &adapter->state)) { + e1000e_down(adapter); + e1000_free_irq(adapter); + } + e1000_power_down_phy(adapter); + + e1000e_free_tx_resources(adapter); + e1000e_free_rx_resources(adapter); + + /* + * kill manageability vlan ID if supported, but not if a vlan with + * the same ID is registered on the host OS (let 8021q kill it) + */ + if ((adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN) && + !(adapter->vlgrp && + vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id))) + e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id); + + /* + * If AMT is enabled, let the firmware know that the network + * interface is now closed + */ + if (adapter->flags & FLAG_HAS_AMT) + e1000_release_hw_control(adapter); + + pm_runtime_put_sync(&pdev->dev); + + return 0; +} +/** + * e1000_set_mac - Change the Ethernet Address of the NIC + * @netdev: network interface device structure + * @p: pointer to an address structure + * + * Returns 0 on success, negative on failure + **/ +static int e1000_set_mac(struct net_device *netdev, void *p) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct sockaddr *addr = p; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); + memcpy(adapter->hw.mac.addr, addr->sa_data, netdev->addr_len); + + e1000e_rar_set(&adapter->hw, adapter->hw.mac.addr, 0); + + if (adapter->flags & FLAG_RESET_OVERWRITES_LAA) { + /* activate the work around */ + e1000e_set_laa_state_82571(&adapter->hw, 1); + + /* + * Hold a copy of the LAA in RAR[14] This is done so that + * between the time RAR[0] gets clobbered and the time it + * gets fixed (in e1000_watchdog), the actual LAA is in one + * of the RARs and no incoming packets directed to this port + * are dropped. Eventually the LAA will be in RAR[0] and + * RAR[14] + */ + e1000e_rar_set(&adapter->hw, + adapter->hw.mac.addr, + adapter->hw.mac.rar_entry_count - 1); + } + + return 0; +} + +/** + * e1000e_update_phy_task - work thread to update phy + * @work: pointer to our work struct + * + * this worker thread exists because we must acquire a + * semaphore to read the phy, which we could msleep while + * waiting for it, and we can't msleep in a timer. + **/ +static void e1000e_update_phy_task(struct work_struct *work) +{ + struct e1000_adapter *adapter = container_of(work, + struct e1000_adapter, update_phy_task); + e1000_get_phy_info(&adapter->hw); +} + +/* + * Need to wait a few seconds after link up to get diagnostic information from + * the phy + */ +static void e1000_update_phy_info(unsigned long data) +{ + struct e1000_adapter *adapter = (struct e1000_adapter *) data; + schedule_work(&adapter->update_phy_task); +} + +/** + * e1000e_update_stats - Update the board statistics counters + * @adapter: board private structure + **/ +void e1000e_update_stats(struct e1000_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct e1000_hw *hw = &adapter->hw; + struct pci_dev *pdev = adapter->pdev; + u16 phy_data; + + /* + * Prevent stats update while adapter is being reset, or if the pci + * connection is down. + */ + if (adapter->link_speed == 0) + return; + if (pci_channel_offline(pdev)) + return; + + adapter->stats.crcerrs += er32(CRCERRS); + adapter->stats.gprc += er32(GPRC); + adapter->stats.gorc += er32(GORCL); + er32(GORCH); /* Clear gorc */ + adapter->stats.bprc += er32(BPRC); + adapter->stats.mprc += er32(MPRC); + adapter->stats.roc += er32(ROC); + + adapter->stats.mpc += er32(MPC); + if ((hw->phy.type == e1000_phy_82578) || + (hw->phy.type == e1000_phy_82577)) { + e1e_rphy(hw, HV_SCC_UPPER, &phy_data); + if (!e1e_rphy(hw, HV_SCC_LOWER, &phy_data)) + adapter->stats.scc += phy_data; + + e1e_rphy(hw, HV_ECOL_UPPER, &phy_data); + if (!e1e_rphy(hw, HV_ECOL_LOWER, &phy_data)) + adapter->stats.ecol += phy_data; + + e1e_rphy(hw, HV_MCC_UPPER, &phy_data); + if (!e1e_rphy(hw, HV_MCC_LOWER, &phy_data)) + adapter->stats.mcc += phy_data; + + e1e_rphy(hw, HV_LATECOL_UPPER, &phy_data); + if (!e1e_rphy(hw, HV_LATECOL_LOWER, &phy_data)) + adapter->stats.latecol += phy_data; + + e1e_rphy(hw, HV_DC_UPPER, &phy_data); + if (!e1e_rphy(hw, HV_DC_LOWER, &phy_data)) + adapter->stats.dc += phy_data; + } else { + adapter->stats.scc += er32(SCC); + adapter->stats.ecol += er32(ECOL); + adapter->stats.mcc += er32(MCC); + adapter->stats.latecol += er32(LATECOL); + adapter->stats.dc += er32(DC); + } + adapter->stats.xonrxc += er32(XONRXC); + adapter->stats.xontxc += er32(XONTXC); + adapter->stats.xoffrxc += er32(XOFFRXC); + adapter->stats.xofftxc += er32(XOFFTXC); + adapter->stats.gptc += er32(GPTC); + adapter->stats.gotc += er32(GOTCL); + er32(GOTCH); /* Clear gotc */ + adapter->stats.rnbc += er32(RNBC); + adapter->stats.ruc += er32(RUC); + + adapter->stats.mptc += er32(MPTC); + adapter->stats.bptc += er32(BPTC); + + /* used for adaptive IFS */ + + hw->mac.tx_packet_delta = er32(TPT); + adapter->stats.tpt += hw->mac.tx_packet_delta; + if ((hw->phy.type == e1000_phy_82578) || + (hw->phy.type == e1000_phy_82577)) { + e1e_rphy(hw, HV_COLC_UPPER, &phy_data); + if (!e1e_rphy(hw, HV_COLC_LOWER, &phy_data)) + hw->mac.collision_delta = phy_data; + } else { + hw->mac.collision_delta = er32(COLC); + } + adapter->stats.colc += hw->mac.collision_delta; + + adapter->stats.algnerrc += er32(ALGNERRC); + adapter->stats.rxerrc += er32(RXERRC); + if ((hw->phy.type == e1000_phy_82578) || + (hw->phy.type == e1000_phy_82577)) { + e1e_rphy(hw, HV_TNCRS_UPPER, &phy_data); + if (!e1e_rphy(hw, HV_TNCRS_LOWER, &phy_data)) + adapter->stats.tncrs += phy_data; + } else { + if ((hw->mac.type != e1000_82574) && + (hw->mac.type != e1000_82583)) + adapter->stats.tncrs += er32(TNCRS); + } + adapter->stats.cexterr += er32(CEXTERR); + adapter->stats.tsctc += er32(TSCTC); + adapter->stats.tsctfc += er32(TSCTFC); + + /* Fill out the OS statistics structure */ + netdev->stats.multicast = adapter->stats.mprc; + netdev->stats.collisions = adapter->stats.colc; + + /* Rx Errors */ + + /* + * RLEC on some newer hardware can be incorrect so build + * our own version based on RUC and ROC + */ + netdev->stats.rx_errors = adapter->stats.rxerrc + + adapter->stats.crcerrs + adapter->stats.algnerrc + + adapter->stats.ruc + adapter->stats.roc + + adapter->stats.cexterr; + netdev->stats.rx_length_errors = adapter->stats.ruc + + adapter->stats.roc; + netdev->stats.rx_crc_errors = adapter->stats.crcerrs; + netdev->stats.rx_frame_errors = adapter->stats.algnerrc; + netdev->stats.rx_missed_errors = adapter->stats.mpc; + + /* Tx Errors */ + netdev->stats.tx_errors = adapter->stats.ecol + + adapter->stats.latecol; + netdev->stats.tx_aborted_errors = adapter->stats.ecol; + netdev->stats.tx_window_errors = adapter->stats.latecol; + netdev->stats.tx_carrier_errors = adapter->stats.tncrs; + + /* Tx Dropped needs to be maintained elsewhere */ + + /* Management Stats */ + adapter->stats.mgptc += er32(MGTPTC); + adapter->stats.mgprc += er32(MGTPRC); + adapter->stats.mgpdc += er32(MGTPDC); +} + +/** + * e1000_phy_read_status - Update the PHY register status snapshot + * @adapter: board private structure + **/ +static void e1000_phy_read_status(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct e1000_phy_regs *phy = &adapter->phy_regs; + int ret_val; + + if ((er32(STATUS) & E1000_STATUS_LU) && + (adapter->hw.phy.media_type == e1000_media_type_copper)) { + ret_val = e1e_rphy(hw, PHY_CONTROL, &phy->bmcr); + ret_val |= e1e_rphy(hw, PHY_STATUS, &phy->bmsr); + ret_val |= e1e_rphy(hw, PHY_AUTONEG_ADV, &phy->advertise); + ret_val |= e1e_rphy(hw, PHY_LP_ABILITY, &phy->lpa); + ret_val |= e1e_rphy(hw, PHY_AUTONEG_EXP, &phy->expansion); + ret_val |= e1e_rphy(hw, PHY_1000T_CTRL, &phy->ctrl1000); + ret_val |= e1e_rphy(hw, PHY_1000T_STATUS, &phy->stat1000); + ret_val |= e1e_rphy(hw, PHY_EXT_STATUS, &phy->estatus); + if (ret_val) + e_warn("Error reading PHY register\n"); + } else { + /* + * Do not read PHY registers if link is not up + * Set values to typical power-on defaults + */ + phy->bmcr = (BMCR_SPEED1000 | BMCR_ANENABLE | BMCR_FULLDPLX); + phy->bmsr = (BMSR_100FULL | BMSR_100HALF | BMSR_10FULL | + BMSR_10HALF | BMSR_ESTATEN | BMSR_ANEGCAPABLE | + BMSR_ERCAP); + phy->advertise = (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP | + ADVERTISE_ALL | ADVERTISE_CSMA); + phy->lpa = 0; + phy->expansion = EXPANSION_ENABLENPAGE; + phy->ctrl1000 = ADVERTISE_1000FULL; + phy->stat1000 = 0; + phy->estatus = (ESTATUS_1000_TFULL | ESTATUS_1000_THALF); + } +} + +static void e1000_print_link_info(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 ctrl = er32(CTRL); + + /* Link status message must follow this format for user tools */ + printk(KERN_INFO "e1000e: %s NIC Link is Up %d Mbps %s, " + "Flow Control: %s\n", + adapter->netdev->name, + adapter->link_speed, + (adapter->link_duplex == FULL_DUPLEX) ? + "Full Duplex" : "Half Duplex", + ((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ? + "RX/TX" : + ((ctrl & E1000_CTRL_RFCE) ? "RX" : + ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" ))); +} + +bool e1000e_has_link(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + bool link_active = 0; + s32 ret_val = 0; + + /* + * get_link_status is set on LSC (link status) interrupt or + * Rx sequence error interrupt. get_link_status will stay + * false until the check_for_link establishes link + * for copper adapters ONLY + */ + switch (hw->phy.media_type) { + case e1000_media_type_copper: + if (hw->mac.get_link_status) { + ret_val = hw->mac.ops.check_for_link(hw); + link_active = !hw->mac.get_link_status; + } else { + link_active = 1; + } + break; + case e1000_media_type_fiber: + ret_val = hw->mac.ops.check_for_link(hw); + link_active = !!(er32(STATUS) & E1000_STATUS_LU); + break; + case e1000_media_type_internal_serdes: + ret_val = hw->mac.ops.check_for_link(hw); + link_active = adapter->hw.mac.serdes_has_link; + break; + default: + case e1000_media_type_unknown: + break; + } + + if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) && + (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) { + /* See e1000_kmrn_lock_loss_workaround_ich8lan() */ + e_info("Gigabit has been disabled, downgrading speed\n"); + } + + return link_active; +} + +static void e1000e_enable_receives(struct e1000_adapter *adapter) +{ + /* make sure the receive unit is started */ + if ((adapter->flags & FLAG_RX_NEEDS_RESTART) && + (adapter->flags & FLAG_RX_RESTART_NOW)) { + struct e1000_hw *hw = &adapter->hw; + u32 rctl = er32(RCTL); + ew32(RCTL, rctl | E1000_RCTL_EN); + adapter->flags &= ~FLAG_RX_RESTART_NOW; + } +} + +/** + * e1000_watchdog - Timer Call-back + * @data: pointer to adapter cast into an unsigned long + **/ +static void e1000_watchdog(unsigned long data) +{ + struct e1000_adapter *adapter = (struct e1000_adapter *) data; + + /* Do the rest outside of interrupt context */ + schedule_work(&adapter->watchdog_task); + + /* TODO: make this use queue_delayed_work() */ +} + +static void e1000_watchdog_task(struct work_struct *work) +{ + struct e1000_adapter *adapter = container_of(work, + struct e1000_adapter, watchdog_task); + struct net_device *netdev = adapter->netdev; + struct e1000_mac_info *mac = &adapter->hw.mac; + struct e1000_phy_info *phy = &adapter->hw.phy; + struct e1000_ring *tx_ring = adapter->tx_ring; + struct e1000_hw *hw = &adapter->hw; + u32 link, tctl; + int tx_pending = 0; + + link = e1000e_has_link(adapter); + if ((adapter->ecdev && (ecdev_get_link(adapter->ecdev)) && link) + || (!adapter->ecdev && (netif_carrier_ok(netdev)) && link)) { + /* Cancel scheduled suspend requests. */ + pm_runtime_resume(netdev->dev.parent); + + e1000e_enable_receives(adapter); + goto link_up; + } + + if ((e1000e_enable_tx_pkt_filtering(hw)) && + (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id)) + e1000_update_mng_vlan(adapter); + + if (link) { + if ((adapter->ecdev && !ecdev_get_link(adapter->ecdev)) + || (!adapter->ecdev && !netif_carrier_ok(netdev))) { + bool txb2b = 1; + + /* Cancel scheduled suspend requests. */ + pm_runtime_resume(netdev->dev.parent); + + /* update snapshot of PHY registers on LSC */ + e1000_phy_read_status(adapter); + mac->ops.get_link_up_info(&adapter->hw, + &adapter->link_speed, + &adapter->link_duplex); + e1000_print_link_info(adapter); + /* + * On supported PHYs, check for duplex mismatch only + * if link has autonegotiated at 10/100 half + */ + if ((hw->phy.type == e1000_phy_igp_3 || + hw->phy.type == e1000_phy_bm) && + (hw->mac.autoneg == true) && + (adapter->link_speed == SPEED_10 || + adapter->link_speed == SPEED_100) && + (adapter->link_duplex == HALF_DUPLEX)) { + u16 autoneg_exp; + + e1e_rphy(hw, PHY_AUTONEG_EXP, &autoneg_exp); + + if (!(autoneg_exp & NWAY_ER_LP_NWAY_CAPS)) + e_info("Autonegotiated half duplex but" + " link partner cannot autoneg. " + " Try forcing full duplex if " + "link gets many collisions.\n"); + } + + /* adjust timeout factor according to speed/duplex */ + adapter->tx_timeout_factor = 1; + switch (adapter->link_speed) { + case SPEED_10: + txb2b = 0; + adapter->tx_timeout_factor = 16; + break; + case SPEED_100: + txb2b = 0; + adapter->tx_timeout_factor = 10; + break; + } + + /* + * workaround: re-program speed mode bit after + * link-up event + */ + if ((adapter->flags & FLAG_TARC_SPEED_MODE_BIT) && + !txb2b) { + u32 tarc0; + tarc0 = er32(TARC(0)); + tarc0 &= ~SPEED_MODE_BIT; + ew32(TARC(0), tarc0); + } + + /* + * disable TSO for pcie and 10/100 speeds, to avoid + * some hardware issues + */ + if (!(adapter->flags & FLAG_TSO_FORCE)) { + switch (adapter->link_speed) { + case SPEED_10: + case SPEED_100: + e_info("10/100 speed: disabling TSO\n"); + netdev->features &= ~NETIF_F_TSO; + netdev->features &= ~NETIF_F_TSO6; + break; + case SPEED_1000: + netdev->features |= NETIF_F_TSO; + netdev->features |= NETIF_F_TSO6; + break; + default: + /* oops */ + break; + } + } + + /* + * enable transmits in the hardware, need to do this + * after setting TARC(0) + */ + tctl = er32(TCTL); + tctl |= E1000_TCTL_EN; + ew32(TCTL, tctl); + + /* + * Perform any post-link-up configuration before + * reporting link up. + */ + if (phy->ops.cfg_on_link_up) + phy->ops.cfg_on_link_up(hw); + + if (adapter->ecdev) + ecdev_set_link(adapter->ecdev, 1); + else + netif_carrier_on(netdev); + + if (!adapter->ecdev && !test_bit(__E1000_DOWN, &adapter->state)) + mod_timer(&adapter->phy_info_timer, + round_jiffies(jiffies + 2 * HZ)); + } + } else { + if ((adapter->ecdev && ecdev_get_link(adapter->ecdev)) + || (!adapter->ecdev && netif_carrier_ok(netdev))) { + adapter->link_speed = 0; + adapter->link_duplex = 0; + /* Link status message must follow this format */ + printk(KERN_INFO "e1000e: %s NIC Link is Down\n", + adapter->netdev->name); + if (adapter->ecdev) + ecdev_set_link(adapter->ecdev, 0); + else + netif_carrier_off(netdev); + if (!adapter->ecdev && !test_bit(__E1000_DOWN, &adapter->state)) + mod_timer(&adapter->phy_info_timer, + round_jiffies(jiffies + 2 * HZ)); + + if (adapter->flags & FLAG_RX_NEEDS_RESTART) + schedule_work(&adapter->reset_task); + else + pm_schedule_suspend(netdev->dev.parent, + LINK_TIMEOUT); + } + } + +link_up: + e1000e_update_stats(adapter); + + mac->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old; + adapter->tpt_old = adapter->stats.tpt; + mac->collision_delta = adapter->stats.colc - adapter->colc_old; + adapter->colc_old = adapter->stats.colc; + + adapter->gorc = adapter->stats.gorc - adapter->gorc_old; + adapter->gorc_old = adapter->stats.gorc; + adapter->gotc = adapter->stats.gotc - adapter->gotc_old; + adapter->gotc_old = adapter->stats.gotc; + + e1000e_update_adaptive(&adapter->hw); + + if ((adapter->ecdev && !ecdev_get_link(adapter->ecdev)) + || (!adapter->ecdev && !netif_carrier_ok(netdev))) { + tx_pending = (e1000_desc_unused(tx_ring) + 1 < + tx_ring->count); + if (tx_pending) { + /* + * We've lost link, so the controller stops DMA, + * but we've got queued Tx work that's never going + * to get done, so reset controller to flush Tx. + * (Do the reset outside of interrupt context). + */ + adapter->tx_timeout_count++; + schedule_work(&adapter->reset_task); + /* return immediately since reset is imminent */ + return; + } + } + + /* Simple mode for Interrupt Throttle Rate (ITR) */ + if (adapter->itr_setting == 4) { + /* + * Symmetric Tx/Rx gets a reduced ITR=2000; + * Total asymmetrical Tx or Rx gets ITR=8000; + * everyone else is between 2000-8000. + */ + u32 goc = (adapter->gotc + adapter->gorc) / 10000; + u32 dif = (adapter->gotc > adapter->gorc ? + adapter->gotc - adapter->gorc : + adapter->gorc - adapter->gotc) / 10000; + u32 itr = goc > 0 ? (dif * 6000 / goc + 2000) : 8000; + + ew32(ITR, 1000000000 / (itr * 256)); + } + + /* Cause software interrupt to ensure Rx ring is cleaned */ + if (adapter->msix_entries) + ew32(ICS, adapter->rx_ring->ims_val); + else + ew32(ICS, E1000_ICS_RXDMT0); + + /* Force detection of hung controller every watchdog period */ + adapter->detect_tx_hung = 1; + + /* + * With 82571 controllers, LAA may be overwritten due to controller + * reset from the other port. Set the appropriate LAA in RAR[0] + */ + if (e1000e_get_laa_state_82571(hw)) + e1000e_rar_set(hw, adapter->hw.mac.addr, 0); + + /* Reset the timer */ + if (!adapter->ecdev && !test_bit(__E1000_DOWN, &adapter->state)) + mod_timer(&adapter->watchdog_timer, + round_jiffies(jiffies + 2 * HZ)); +} + +#define E1000_TX_FLAGS_CSUM 0x00000001 +#define E1000_TX_FLAGS_VLAN 0x00000002 +#define E1000_TX_FLAGS_TSO 0x00000004 +#define E1000_TX_FLAGS_IPV4 0x00000008 +#define E1000_TX_FLAGS_VLAN_MASK 0xffff0000 +#define E1000_TX_FLAGS_VLAN_SHIFT 16 + +static int e1000_tso(struct e1000_adapter *adapter, + struct sk_buff *skb) +{ + struct e1000_ring *tx_ring = adapter->tx_ring; + struct e1000_context_desc *context_desc; + struct e1000_buffer *buffer_info; + unsigned int i; + u32 cmd_length = 0; + u16 ipcse = 0, tucse, mss; + u8 ipcss, ipcso, tucss, tucso, hdr_len; + int err; + + if (!skb_is_gso(skb)) + return 0; + + if (skb_header_cloned(skb)) { + err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); + if (err) + return err; + } + + hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); + mss = skb_shinfo(skb)->gso_size; + if (skb->protocol == htons(ETH_P_IP)) { + struct iphdr *iph = ip_hdr(skb); + iph->tot_len = 0; + iph->check = 0; + tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr, + 0, IPPROTO_TCP, 0); + cmd_length = E1000_TXD_CMD_IP; + ipcse = skb_transport_offset(skb) - 1; + } else if (skb_is_gso_v6(skb)) { + ipv6_hdr(skb)->payload_len = 0; + tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, + &ipv6_hdr(skb)->daddr, + 0, IPPROTO_TCP, 0); + ipcse = 0; + } + ipcss = skb_network_offset(skb); + ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data; + tucss = skb_transport_offset(skb); + tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data; + tucse = 0; + + cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE | + E1000_TXD_CMD_TCP | (skb->len - (hdr_len))); + + i = tx_ring->next_to_use; + context_desc = E1000_CONTEXT_DESC(*tx_ring, i); + buffer_info = &tx_ring->buffer_info[i]; + + context_desc->lower_setup.ip_fields.ipcss = ipcss; + context_desc->lower_setup.ip_fields.ipcso = ipcso; + context_desc->lower_setup.ip_fields.ipcse = cpu_to_le16(ipcse); + context_desc->upper_setup.tcp_fields.tucss = tucss; + context_desc->upper_setup.tcp_fields.tucso = tucso; + context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse); + context_desc->tcp_seg_setup.fields.mss = cpu_to_le16(mss); + context_desc->tcp_seg_setup.fields.hdr_len = hdr_len; + context_desc->cmd_and_length = cpu_to_le32(cmd_length); + + buffer_info->time_stamp = jiffies; + buffer_info->next_to_watch = i; + + i++; + if (i == tx_ring->count) + i = 0; + tx_ring->next_to_use = i; + + return 1; +} + +static bool e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb) +{ + struct e1000_ring *tx_ring = adapter->tx_ring; + struct e1000_context_desc *context_desc; + struct e1000_buffer *buffer_info; + unsigned int i; + u8 css; + u32 cmd_len = E1000_TXD_CMD_DEXT; + __be16 protocol; + + if (skb->ip_summed != CHECKSUM_PARTIAL) + return 0; + + if (skb->protocol == cpu_to_be16(ETH_P_8021Q)) + protocol = vlan_eth_hdr(skb)->h_vlan_encapsulated_proto; + else + protocol = skb->protocol; + + switch (protocol) { + case cpu_to_be16(ETH_P_IP): + if (ip_hdr(skb)->protocol == IPPROTO_TCP) + cmd_len |= E1000_TXD_CMD_TCP; + break; + case cpu_to_be16(ETH_P_IPV6): + /* XXX not handling all IPV6 headers */ + if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP) + cmd_len |= E1000_TXD_CMD_TCP; + break; + default: + if (unlikely(net_ratelimit())) + e_warn("checksum_partial proto=%x!\n", + be16_to_cpu(protocol)); + break; + } + + css = skb_transport_offset(skb); + + i = tx_ring->next_to_use; + buffer_info = &tx_ring->buffer_info[i]; + context_desc = E1000_CONTEXT_DESC(*tx_ring, i); + + context_desc->lower_setup.ip_config = 0; + context_desc->upper_setup.tcp_fields.tucss = css; + context_desc->upper_setup.tcp_fields.tucso = + css + skb->csum_offset; + context_desc->upper_setup.tcp_fields.tucse = 0; + context_desc->tcp_seg_setup.data = 0; + context_desc->cmd_and_length = cpu_to_le32(cmd_len); + + buffer_info->time_stamp = jiffies; + buffer_info->next_to_watch = i; + + i++; + if (i == tx_ring->count) + i = 0; + tx_ring->next_to_use = i; + + return 1; +} + +#define E1000_MAX_PER_TXD 8192 +#define E1000_MAX_TXD_PWR 12 + +static int e1000_tx_map(struct e1000_adapter *adapter, + struct sk_buff *skb, unsigned int first, + unsigned int max_per_txd, unsigned int nr_frags, + unsigned int mss) +{ + struct e1000_ring *tx_ring = adapter->tx_ring; + struct pci_dev *pdev = adapter->pdev; + struct e1000_buffer *buffer_info; + unsigned int len = skb_headlen(skb); + unsigned int offset = 0, size, count = 0, i; + unsigned int f, bytecount, segs; + + i = tx_ring->next_to_use; + + while (len) { + buffer_info = &tx_ring->buffer_info[i]; + size = min(len, max_per_txd); + + buffer_info->length = size; + buffer_info->time_stamp = jiffies; + buffer_info->next_to_watch = i; + buffer_info->dma = dma_map_single(&pdev->dev, + skb->data + offset, + size, DMA_TO_DEVICE); + buffer_info->mapped_as_page = false; + if (dma_mapping_error(&pdev->dev, buffer_info->dma)) + goto dma_error; + + len -= size; + offset += size; + count++; + + if (len) { + i++; + if (i == tx_ring->count) + i = 0; + } + } + + for (f = 0; f < nr_frags; f++) { + struct skb_frag_struct *frag; + + frag = &skb_shinfo(skb)->frags[f]; + len = frag->size; + offset = frag->page_offset; + + while (len) { + i++; + if (i == tx_ring->count) + i = 0; + + buffer_info = &tx_ring->buffer_info[i]; + size = min(len, max_per_txd); + + buffer_info->length = size; + buffer_info->time_stamp = jiffies; + buffer_info->next_to_watch = i; + buffer_info->dma = dma_map_page(&pdev->dev, frag->page, + offset, size, + DMA_TO_DEVICE); + buffer_info->mapped_as_page = true; + if (dma_mapping_error(&pdev->dev, buffer_info->dma)) + goto dma_error; + + len -= size; + offset += size; + count++; + } + } + + segs = skb_shinfo(skb)->gso_segs ?: 1; + /* multiply data chunks by size of headers */ + bytecount = ((segs - 1) * skb_headlen(skb)) + skb->len; + + tx_ring->buffer_info[i].skb = skb; + tx_ring->buffer_info[i].segs = segs; + tx_ring->buffer_info[i].bytecount = bytecount; + tx_ring->buffer_info[first].next_to_watch = i; + + return count; + +dma_error: + dev_err(&pdev->dev, "TX DMA map failed\n"); + buffer_info->dma = 0; + if (count) + count--; + + while (count--) { + if (i==0) + i += tx_ring->count; + i--; + buffer_info = &tx_ring->buffer_info[i]; + e1000_put_txbuf(adapter, buffer_info);; + } + + return 0; +} + +static void e1000_tx_queue(struct e1000_adapter *adapter, + int tx_flags, int count) +{ + struct e1000_ring *tx_ring = adapter->tx_ring; + struct e1000_tx_desc *tx_desc = NULL; + struct e1000_buffer *buffer_info; + u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS; + unsigned int i; + + if (tx_flags & E1000_TX_FLAGS_TSO) { + txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D | + E1000_TXD_CMD_TSE; + txd_upper |= E1000_TXD_POPTS_TXSM << 8; + + if (tx_flags & E1000_TX_FLAGS_IPV4) + txd_upper |= E1000_TXD_POPTS_IXSM << 8; + } + + if (tx_flags & E1000_TX_FLAGS_CSUM) { + txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D; + txd_upper |= E1000_TXD_POPTS_TXSM << 8; + } + + if (tx_flags & E1000_TX_FLAGS_VLAN) { + txd_lower |= E1000_TXD_CMD_VLE; + txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK); + } + + i = tx_ring->next_to_use; + + while (count--) { + buffer_info = &tx_ring->buffer_info[i]; + tx_desc = E1000_TX_DESC(*tx_ring, i); + tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma); + tx_desc->lower.data = + cpu_to_le32(txd_lower | buffer_info->length); + tx_desc->upper.data = cpu_to_le32(txd_upper); + + i++; + if (i == tx_ring->count) + i = 0; + } + + tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd); + + /* + * Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. (Only + * applicable for weak-ordered memory model archs, + * such as IA-64). + */ + wmb(); + + tx_ring->next_to_use = i; + writel(i, adapter->hw.hw_addr + tx_ring->tail); + /* + * we need this if more than one processor can write to our tail + * at a time, it synchronizes IO on IA64/Altix systems + */ + mmiowb(); +} + +#define MINIMUM_DHCP_PACKET_SIZE 282 +static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter, + struct sk_buff *skb) +{ + struct e1000_hw *hw = &adapter->hw; + u16 length, offset; + + if (vlan_tx_tag_present(skb)) { + if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) && + (adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN))) + return 0; + } + + if (skb->len <= MINIMUM_DHCP_PACKET_SIZE) + return 0; + + if (((struct ethhdr *) skb->data)->h_proto != htons(ETH_P_IP)) + return 0; + + { + const struct iphdr *ip = (struct iphdr *)((u8 *)skb->data+14); + struct udphdr *udp; + + if (ip->protocol != IPPROTO_UDP) + return 0; + + udp = (struct udphdr *)((u8 *)ip + (ip->ihl << 2)); + if (ntohs(udp->dest) != 67) + return 0; + + offset = (u8 *)udp + 8 - skb->data; + length = skb->len - offset; + return e1000e_mng_write_dhcp_info(hw, (u8 *)udp + 8, length); + } + + return 0; +} + +static int __e1000_maybe_stop_tx(struct net_device *netdev, int size) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + + netif_stop_queue(netdev); + /* + * Herbert's original patch had: + * smp_mb__after_netif_stop_queue(); + * but since that doesn't exist yet, just open code it. + */ + smp_mb(); + + /* + * We need to check again in a case another CPU has just + * made room available. + */ + if (e1000_desc_unused(adapter->tx_ring) < size) + return -EBUSY; + + /* A reprieve! */ + netif_start_queue(netdev); + ++adapter->restart_queue; + return 0; +} + +static int e1000_maybe_stop_tx(struct net_device *netdev, int size) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + + if (e1000_desc_unused(adapter->tx_ring) >= size) + return 0; + return __e1000_maybe_stop_tx(netdev, size); +} + +#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 ) +static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, + struct net_device *netdev) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_ring *tx_ring = adapter->tx_ring; + unsigned int first; + unsigned int max_per_txd = E1000_MAX_PER_TXD; + unsigned int max_txd_pwr = E1000_MAX_TXD_PWR; + unsigned int tx_flags = 0; + unsigned int len = skb_headlen(skb); + unsigned int nr_frags; + unsigned int mss; + int count = 0; + int tso; + unsigned int f; + + if (test_bit(__E1000_DOWN, &adapter->state)) { + if (!adapter->ecdev) + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + if (skb->len <= 0) { + if (!adapter->ecdev) + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + mss = skb_shinfo(skb)->gso_size; + /* + * The controller does a simple calculation to + * make sure there is enough room in the FIFO before + * initiating the DMA for each buffer. The calc is: + * 4 = ceil(buffer len/mss). To make sure we don't + * overrun the FIFO, adjust the max buffer len if mss + * drops. + */ + if (mss) { + u8 hdr_len; + max_per_txd = min(mss << 2, max_per_txd); + max_txd_pwr = fls(max_per_txd) - 1; + + /* + * TSO Workaround for 82571/2/3 Controllers -- if skb->data + * points to just header, pull a few bytes of payload from + * frags into skb->data + */ + hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); + /* + * we do this workaround for ES2LAN, but it is un-necessary, + * avoiding it could save a lot of cycles + */ + if (skb->data_len && (hdr_len == len)) { + unsigned int pull_size; + + pull_size = min((unsigned int)4, skb->data_len); + if (!__pskb_pull_tail(skb, pull_size)) { + e_err("__pskb_pull_tail failed.\n"); + if (!adapter->ecdev) + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + len = skb_headlen(skb); + } + } + + /* reserve a descriptor for the offload context */ + if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL)) + count++; + count++; + + count += TXD_USE_COUNT(len, max_txd_pwr); + + nr_frags = skb_shinfo(skb)->nr_frags; + for (f = 0; f < nr_frags; f++) + count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size, + max_txd_pwr); + + if (adapter->hw.mac.tx_pkt_filtering) + e1000_transfer_dhcp_info(adapter, skb); + + /* + * need: count + 2 desc gap to keep tail from touching + * head, otherwise try next time + */ + if (!adapter->ecdev && e1000_maybe_stop_tx(netdev, count + 2)) + return NETDEV_TX_BUSY; + + if (adapter->vlgrp && vlan_tx_tag_present(skb)) { + tx_flags |= E1000_TX_FLAGS_VLAN; + tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT); + } + + first = tx_ring->next_to_use; + + tso = e1000_tso(adapter, skb); + if (tso < 0) { + if (!adapter->ecdev) + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + if (tso) + tx_flags |= E1000_TX_FLAGS_TSO; + else if (e1000_tx_csum(adapter, skb)) + tx_flags |= E1000_TX_FLAGS_CSUM; + + /* + * Old method was to assume IPv4 packet by default if TSO was enabled. + * 82571 hardware supports TSO capabilities for IPv6 as well... + * no longer assume, we must. + */ + if (skb->protocol == htons(ETH_P_IP)) + tx_flags |= E1000_TX_FLAGS_IPV4; + + /* if count is 0 then mapping error has occured */ + count = e1000_tx_map(adapter, skb, first, max_per_txd, nr_frags, mss); + if (count) { + e1000_tx_queue(adapter, tx_flags, count); + /* Make sure there is space in the ring for the next send. */ + if (!adapter->ecdev) + e1000_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 2); + + } else { + if (!adapter->ecdev) + dev_kfree_skb_any(skb); + tx_ring->buffer_info[first].time_stamp = 0; + tx_ring->next_to_use = first; + } + + return NETDEV_TX_OK; +} + +/** + * e1000_tx_timeout - Respond to a Tx Hang + * @netdev: network interface device structure + **/ +static void e1000_tx_timeout(struct net_device *netdev) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + + /* Do the reset outside of interrupt context */ + adapter->tx_timeout_count++; + schedule_work(&adapter->reset_task); +} + +static void e1000_reset_task(struct work_struct *work) +{ + struct e1000_adapter *adapter; + adapter = container_of(work, struct e1000_adapter, reset_task); + + e1000e_dump(adapter); + e_err("Reset adapter\n"); + e1000e_reinit_locked(adapter); +} + +/** + * e1000_get_stats - Get System Network Statistics + * @netdev: network interface device structure + * + * Returns the address of the device statistics structure. + * The statistics are actually updated from the timer callback. + **/ +static struct net_device_stats *e1000_get_stats(struct net_device *netdev) +{ + /* only return the current stats */ + return &netdev->stats; +} + +/** + * e1000_change_mtu - Change the Maximum Transfer Unit + * @netdev: network interface device structure + * @new_mtu: new value for maximum frame size + * + * Returns 0 on success, negative on failure + **/ +static int e1000_change_mtu(struct net_device *netdev, int new_mtu) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; + + if (adapter->ecdev) + return -EBUSY; + + /* Jumbo frame support */ + if ((max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) && + !(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) { + e_err("Jumbo Frames not supported.\n"); + return -EINVAL; + } + + /* Supported frame sizes */ + if ((new_mtu < ETH_ZLEN + ETH_FCS_LEN + VLAN_HLEN) || + (max_frame > adapter->max_hw_frame_size)) { + e_err("Unsupported MTU setting\n"); + return -EINVAL; + } + + /* 82573 Errata 17 */ + if (((adapter->hw.mac.type == e1000_82573) || + (adapter->hw.mac.type == e1000_82574)) && + (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN)) { + adapter->flags2 |= FLAG2_DISABLE_ASPM_L1; + e1000e_disable_aspm(adapter->pdev, PCIE_LINK_STATE_L1); + } + + while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) + msleep(1); + /* e1000e_down -> e1000e_reset dependent on max_frame_size & mtu */ + adapter->max_frame_size = max_frame; + e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu); + netdev->mtu = new_mtu; + if (netif_running(netdev)) + e1000e_down(adapter); + + /* + * NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN + * means we reserve 2 more, this pushes us to allocate from the next + * larger slab size. + * i.e. RXBUFFER_2048 --> size-4096 slab + * However with the new *_jumbo_rx* routines, jumbo receives will use + * fragmented skbs + */ + + if (max_frame <= 2048) + adapter->rx_buffer_len = 2048; + else + adapter->rx_buffer_len = 4096; + + /* adjust allocation if LPE protects us, and we aren't using SBP */ + if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) || + (max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN)) + adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + + ETH_FCS_LEN; + + if (netif_running(netdev)) + e1000e_up(adapter); + else + e1000e_reset(adapter); + + clear_bit(__E1000_RESETTING, &adapter->state); + + return 0; +} + +static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, + int cmd) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct mii_ioctl_data *data = if_mii(ifr); + + if (adapter->hw.phy.media_type != e1000_media_type_copper) + return -EOPNOTSUPP; + + switch (cmd) { + case SIOCGMIIPHY: + data->phy_id = adapter->hw.phy.addr; + break; + case SIOCGMIIREG: + e1000_phy_read_status(adapter); + + switch (data->reg_num & 0x1F) { + case MII_BMCR: + data->val_out = adapter->phy_regs.bmcr; + break; + case MII_BMSR: + data->val_out = adapter->phy_regs.bmsr; + break; + case MII_PHYSID1: + data->val_out = (adapter->hw.phy.id >> 16); + break; + case MII_PHYSID2: + data->val_out = (adapter->hw.phy.id & 0xFFFF); + break; + case MII_ADVERTISE: + data->val_out = adapter->phy_regs.advertise; + break; + case MII_LPA: + data->val_out = adapter->phy_regs.lpa; + break; + case MII_EXPANSION: + data->val_out = adapter->phy_regs.expansion; + break; + case MII_CTRL1000: + data->val_out = adapter->phy_regs.ctrl1000; + break; + case MII_STAT1000: + data->val_out = adapter->phy_regs.stat1000; + break; + case MII_ESTATUS: + data->val_out = adapter->phy_regs.estatus; + break; + default: + return -EIO; + } + break; + case SIOCSMIIREG: + default: + return -EOPNOTSUPP; + } + return 0; +} + +static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + switch (cmd) { + case SIOCGMIIPHY: + case SIOCGMIIREG: + case SIOCSMIIREG: + return e1000_mii_ioctl(netdev, ifr, cmd); + default: + return -EOPNOTSUPP; + } +} + +static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc) +{ + struct e1000_hw *hw = &adapter->hw; + u32 i, mac_reg; + u16 phy_reg; + int retval = 0; + + /* copy MAC RARs to PHY RARs */ + for (i = 0; i < adapter->hw.mac.rar_entry_count; i++) { + mac_reg = er32(RAL(i)); + e1e_wphy(hw, BM_RAR_L(i), (u16)(mac_reg & 0xFFFF)); + e1e_wphy(hw, BM_RAR_M(i), (u16)((mac_reg >> 16) & 0xFFFF)); + mac_reg = er32(RAH(i)); + e1e_wphy(hw, BM_RAR_H(i), (u16)(mac_reg & 0xFFFF)); + e1e_wphy(hw, BM_RAR_CTRL(i), (u16)((mac_reg >> 16) & 0xFFFF)); + } + + /* copy MAC MTA to PHY MTA */ + for (i = 0; i < adapter->hw.mac.mta_reg_count; i++) { + mac_reg = E1000_READ_REG_ARRAY(hw, E1000_MTA, i); + e1e_wphy(hw, BM_MTA(i), (u16)(mac_reg & 0xFFFF)); + e1e_wphy(hw, BM_MTA(i) + 1, (u16)((mac_reg >> 16) & 0xFFFF)); + } + + /* configure PHY Rx Control register */ + e1e_rphy(&adapter->hw, BM_RCTL, &phy_reg); + mac_reg = er32(RCTL); + if (mac_reg & E1000_RCTL_UPE) + phy_reg |= BM_RCTL_UPE; + if (mac_reg & E1000_RCTL_MPE) + phy_reg |= BM_RCTL_MPE; + phy_reg &= ~(BM_RCTL_MO_MASK); + if (mac_reg & E1000_RCTL_MO_3) + phy_reg |= (((mac_reg & E1000_RCTL_MO_3) >> E1000_RCTL_MO_SHIFT) + << BM_RCTL_MO_SHIFT); + if (mac_reg & E1000_RCTL_BAM) + phy_reg |= BM_RCTL_BAM; + if (mac_reg & E1000_RCTL_PMCF) + phy_reg |= BM_RCTL_PMCF; + mac_reg = er32(CTRL); + if (mac_reg & E1000_CTRL_RFCE) + phy_reg |= BM_RCTL_RFCE; + e1e_wphy(&adapter->hw, BM_RCTL, phy_reg); + + /* enable PHY wakeup in MAC register */ + ew32(WUFC, wufc); + ew32(WUC, E1000_WUC_PHY_WAKE | E1000_WUC_PME_EN); + + /* configure and enable PHY wakeup in PHY registers */ + e1e_wphy(&adapter->hw, BM_WUFC, wufc); + e1e_wphy(&adapter->hw, BM_WUC, E1000_WUC_PME_EN); + + /* activate PHY wakeup */ + retval = hw->phy.ops.acquire(hw); + if (retval) { + e_err("Could not acquire PHY\n"); + return retval; + } + e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, + (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT)); + retval = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, &phy_reg); + if (retval) { + e_err("Could not read PHY page 769\n"); + goto out; + } + phy_reg |= BM_WUC_ENABLE_BIT | BM_WUC_HOST_WU_BIT; + retval = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg); + if (retval) + e_err("Could not set PHY Host Wakeup bit\n"); +out: + hw->phy.ops.release(hw); + + return retval; +} + +static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake, + bool runtime) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 ctrl, ctrl_ext, rctl, status; + /* Runtime suspend should only enable wakeup for link changes */ + u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol; + int retval = 0; + + netif_device_detach(netdev); + + if (netif_running(netdev)) { + WARN_ON(test_bit(__E1000_RESETTING, &adapter->state)); + e1000e_down(adapter); + e1000_free_irq(adapter); + } + e1000e_reset_interrupt_capability(adapter); + + retval = pci_save_state(pdev); + if (retval) + return retval; + + status = er32(STATUS); + if (status & E1000_STATUS_LU) + wufc &= ~E1000_WUFC_LNKC; + + if (wufc) { + e1000_setup_rctl(adapter); + e1000_set_multi(netdev); + + /* turn on all-multi mode if wake on multicast is enabled */ + if (wufc & E1000_WUFC_MC) { + rctl = er32(RCTL); + rctl |= E1000_RCTL_MPE; + ew32(RCTL, rctl); + } + + ctrl = er32(CTRL); + /* advertise wake from D3Cold */ + #define E1000_CTRL_ADVD3WUC 0x00100000 + /* phy power management enable */ + #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000 + ctrl |= E1000_CTRL_ADVD3WUC; + if (!(adapter->flags2 & FLAG2_HAS_PHY_WAKEUP)) + ctrl |= E1000_CTRL_EN_PHY_PWR_MGMT; + ew32(CTRL, ctrl); + + if (adapter->hw.phy.media_type == e1000_media_type_fiber || + adapter->hw.phy.media_type == + e1000_media_type_internal_serdes) { + /* keep the laser running in D3 */ + ctrl_ext = er32(CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_SDP3_DATA; + ew32(CTRL_EXT, ctrl_ext); + } + + if (adapter->flags & FLAG_IS_ICH) + e1000e_disable_gig_wol_ich8lan(&adapter->hw); + + /* Allow time for pending master requests to run */ + e1000e_disable_pcie_master(&adapter->hw); + + if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) { + /* enable wakeup by the PHY */ + retval = e1000_init_phy_wakeup(adapter, wufc); + if (retval) + return retval; + } else { + /* enable wakeup by the MAC */ + ew32(WUFC, wufc); + ew32(WUC, E1000_WUC_PME_EN); + } + } else { + ew32(WUC, 0); + ew32(WUFC, 0); + } + + *enable_wake = !!wufc; + + /* make sure adapter isn't asleep if manageability is enabled */ + if ((adapter->flags & FLAG_MNG_PT_ENABLED) || + (hw->mac.ops.check_mng_mode(hw))) + *enable_wake = true; + + if (adapter->hw.phy.type == e1000_phy_igp_3) + e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw); + + /* + * Release control of h/w to f/w. If f/w is AMT enabled, this + * would have already happened in close and is redundant. + */ + e1000_release_hw_control(adapter); + + pci_disable_device(pdev); + + return 0; +} + +static void e1000_power_off(struct pci_dev *pdev, bool sleep, bool wake) +{ + if (sleep && wake) { + pci_prepare_to_sleep(pdev); + return; + } + + pci_wake_from_d3(pdev, wake); + pci_set_power_state(pdev, PCI_D3hot); +} + +static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep, + bool wake) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct e1000_adapter *adapter = netdev_priv(netdev); + + /* + * The pci-e switch on some quad port adapters will report a + * correctable error when the MAC transitions from D0 to D3. To + * prevent this we need to mask off the correctable errors on the + * downstream port of the pci-e switch. + */ + if (adapter->flags & FLAG_IS_QUAD_PORT) { + struct pci_dev *us_dev = pdev->bus->self; + int pos = pci_find_capability(us_dev, PCI_CAP_ID_EXP); + u16 devctl; + + pci_read_config_word(us_dev, pos + PCI_EXP_DEVCTL, &devctl); + pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL, + (devctl & ~PCI_EXP_DEVCTL_CERE)); + + e1000_power_off(pdev, sleep, wake); + + pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL, devctl); + } else { + e1000_power_off(pdev, sleep, wake); + } +} + +#ifdef CONFIG_PCIEASPM +static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state) +{ + pci_disable_link_state(pdev, state); +} +#else +static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state) +{ + int pos; + u16 reg16; + + /* + * Both device and parent should have the same ASPM setting. + * Disable ASPM in downstream component first and then upstream. + */ + pos = pci_pcie_cap(pdev); + pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16); + reg16 &= ~state; + pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16); + + if (!pdev->bus->self) + return; + + pos = pci_pcie_cap(pdev->bus->self); + pci_read_config_word(pdev->bus->self, pos + PCI_EXP_LNKCTL, ®16); + reg16 &= ~state; + pci_write_config_word(pdev->bus->self, pos + PCI_EXP_LNKCTL, reg16); +} +#endif +void e1000e_disable_aspm(struct pci_dev *pdev, u16 state) +{ + dev_info(&pdev->dev, "Disabling ASPM %s %s\n", + (state & PCIE_LINK_STATE_L0S) ? "L0s" : "", + (state & PCIE_LINK_STATE_L1) ? "L1" : ""); + + __e1000e_disable_aspm(pdev, state); +} + +#ifdef CONFIG_PM_OPS +static bool e1000e_pm_ready(struct e1000_adapter *adapter) +{ + return !!adapter->tx_ring->buffer_info; +} + +static int __e1000_resume(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 err; + + if (adapter->ecdev) + return -EBUSY; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + pci_save_state(pdev); + if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1) + e1000e_disable_aspm(pdev, PCIE_LINK_STATE_L1); + + e1000e_set_interrupt_capability(adapter); + if (netif_running(netdev)) { + err = e1000_request_irq(adapter); + if (err) + return err; + } + + e1000e_power_up_phy(adapter); + + /* report the system wakeup cause from S3/S4 */ + if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) { + u16 phy_data; + + e1e_rphy(&adapter->hw, BM_WUS, &phy_data); + if (phy_data) { + e_info("PHY Wakeup cause - %s\n", + phy_data & E1000_WUS_EX ? "Unicast Packet" : + phy_data & E1000_WUS_MC ? "Multicast Packet" : + phy_data & E1000_WUS_BC ? "Broadcast Packet" : + phy_data & E1000_WUS_MAG ? "Magic Packet" : + phy_data & E1000_WUS_LNKC ? "Link Status " + " Change" : "other"); + } + e1e_wphy(&adapter->hw, BM_WUS, ~0); + } else { + u32 wus = er32(WUS); + if (wus) { + e_info("MAC Wakeup cause - %s\n", + wus & E1000_WUS_EX ? "Unicast Packet" : + wus & E1000_WUS_MC ? "Multicast Packet" : + wus & E1000_WUS_BC ? "Broadcast Packet" : + wus & E1000_WUS_MAG ? "Magic Packet" : + wus & E1000_WUS_LNKC ? "Link Status Change" : + "other"); + } + ew32(WUS, ~0); + } + + e1000e_reset(adapter); + + e1000_init_manageability_pt(adapter); + + if (netif_running(netdev)) + e1000e_up(adapter); + + netif_device_attach(netdev); + + /* + * If the controller has AMT, do not set DRV_LOAD until the interface + * is up. For all other cases, let the f/w know that the h/w is now + * under the control of the driver. + */ + if (!(adapter->flags & FLAG_HAS_AMT)) + e1000_get_hw_control(adapter); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int e1000_suspend(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + int retval; + bool wake; + struct net_device *netdev = pci_get_drvdata(pdev); + struct e1000_adapter *adapter = netdev_priv(netdev); + + if (adapter->ecdev) { + return -EBUSY; + } + + retval = __e1000_shutdown(pdev, &wake, false); + if (!retval) + e1000_complete_shutdown(pdev, true, wake); + + return retval; +} + +static int e1000_resume(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct net_device *netdev = pci_get_drvdata(pdev); + struct e1000_adapter *adapter = netdev_priv(netdev); + + if (adapter->ecdev) { + return -EBUSY; + } + + if (e1000e_pm_ready(adapter)) + adapter->idle_check = true; + + return __e1000_resume(pdev); +} +#endif /* CONFIG_PM_SLEEP */ + +#ifdef CONFIG_PM_RUNTIME +static int e1000_runtime_suspend(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct net_device *netdev = pci_get_drvdata(pdev); + struct e1000_adapter *adapter = netdev_priv(netdev); + + if (e1000e_pm_ready(adapter)) { + bool wake; + + __e1000_shutdown(pdev, &wake, true); + } + + return 0; +} + +static int e1000_idle(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct net_device *netdev = pci_get_drvdata(pdev); + struct e1000_adapter *adapter = netdev_priv(netdev); + + if (!e1000e_pm_ready(adapter)) + return 0; + + if (adapter->idle_check) { + adapter->idle_check = false; + if (!e1000e_has_link(adapter)) + pm_schedule_suspend(dev, MSEC_PER_SEC); + } + + return -EBUSY; +} + +static int e1000_runtime_resume(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct net_device *netdev = pci_get_drvdata(pdev); + struct e1000_adapter *adapter = netdev_priv(netdev); + + if (!e1000e_pm_ready(adapter)) + return 0; + + adapter->idle_check = !dev->power.runtime_auto; + return __e1000_resume(pdev); +} +#endif /* CONFIG_PM_RUNTIME */ +#endif /* CONFIG_PM_OPS */ + +static void e1000_shutdown(struct pci_dev *pdev) +{ + bool wake = false; + struct net_device *netdev = pci_get_drvdata(pdev); + struct e1000_adapter *adapter = netdev_priv(netdev); + + if (adapter->ecdev) + return; + + __e1000_shutdown(pdev, &wake, false); + + if (system_state == SYSTEM_POWER_OFF) + e1000_complete_shutdown(pdev, false, wake); +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + * Polling 'interrupt' - used by things like netconsole to send skbs + * without having to re-enable interrupts. It's not called while + * the interrupt routine is executing. + */ +static void e1000_netpoll(struct net_device *netdev) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + + disable_irq(adapter->pdev->irq); + e1000_intr(adapter->pdev->irq, netdev); + + enable_irq(adapter->pdev->irq); +} +#endif + +/** + * e1000_io_error_detected - called when PCI error is detected + * @pdev: Pointer to PCI device + * @state: The current pci connection state + * + * This function is called after a PCI bus error affecting + * this device has been detected. + */ +static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct e1000_adapter *adapter = netdev_priv(netdev); + + netif_device_detach(netdev); + + if (state == pci_channel_io_perm_failure) + return PCI_ERS_RESULT_DISCONNECT; + + if (netif_running(netdev)) + e1000e_down(adapter); + pci_disable_device(pdev); + + /* Request a slot slot reset. */ + return PCI_ERS_RESULT_NEED_RESET; +} + +/** + * e1000_io_slot_reset - called after the pci bus has been reset. + * @pdev: Pointer to PCI device + * + * Restart the card from scratch, as if from a cold-boot. Implementation + * resembles the first-half of the e1000_resume routine. + */ +static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + int err; + pci_ers_result_t result; + + if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1) + e1000e_disable_aspm(pdev, PCIE_LINK_STATE_L1); + err = pci_enable_device_mem(pdev); + if (err) { + dev_err(&pdev->dev, + "Cannot re-enable PCI device after reset.\n"); + result = PCI_ERS_RESULT_DISCONNECT; + } else { + pci_set_master(pdev); + pdev->state_saved = true; + pci_restore_state(pdev); + + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); + + e1000e_reset(adapter); + ew32(WUS, ~0); + result = PCI_ERS_RESULT_RECOVERED; + } + + pci_cleanup_aer_uncorrect_error_status(pdev); + + return result; +} + +/** + * e1000_io_resume - called when traffic can start flowing again. + * @pdev: Pointer to PCI device + * + * This callback is called when the error recovery driver tells us that + * its OK to resume normal operation. Implementation resembles the + * second-half of the e1000_resume routine. + */ +static void e1000_io_resume(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct e1000_adapter *adapter = netdev_priv(netdev); + + e1000_init_manageability_pt(adapter); + + if (netif_running(netdev)) { + if (e1000e_up(adapter)) { + dev_err(&pdev->dev, + "can't bring device back up after reset\n"); + return; + } + } + + netif_device_attach(netdev); + + /* + * If the controller has AMT, do not set DRV_LOAD until the interface + * is up. For all other cases, let the f/w know that the h/w is now + * under the control of the driver. + */ + if (!(adapter->flags & FLAG_HAS_AMT)) + e1000_get_hw_control(adapter); + +} + +static void e1000_print_device_info(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + u32 pba_num; + + /* print bus type/speed/width info */ + e_info("(PCI Express:2.5GB/s:%s) %pM\n", + /* bus width */ + ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" : + "Width x1"), + /* MAC address */ + netdev->dev_addr); + e_info("Intel(R) PRO/%s Network Connection\n", + (hw->phy.type == e1000_phy_ife) ? "10/100" : "1000"); + e1000e_read_pba_num(hw, &pba_num); + e_info("MAC: %d, PHY: %d, PBA No: %06x-%03x\n", + hw->mac.type, hw->phy.type, (pba_num >> 8), (pba_num & 0xff)); +} + +static void e1000_eeprom_checks(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + int ret_val; + u16 buf = 0; + + if (hw->mac.type != e1000_82573) + return; + + ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &buf); + if (!ret_val && (!(le16_to_cpu(buf) & (1 << 0)))) { + /* Deep Smart Power Down (DSPD) */ + dev_warn(&adapter->pdev->dev, + "Warning: detected DSPD enabled in EEPROM\n"); + } +} + +static const struct net_device_ops e1000e_netdev_ops = { + .ndo_open = e1000_open, + .ndo_stop = e1000_close, + .ndo_start_xmit = e1000_xmit_frame, + .ndo_get_stats = e1000_get_stats, + .ndo_set_multicast_list = e1000_set_multi, + .ndo_set_mac_address = e1000_set_mac, + .ndo_change_mtu = e1000_change_mtu, + .ndo_do_ioctl = e1000_ioctl, + .ndo_tx_timeout = e1000_tx_timeout, + .ndo_validate_addr = eth_validate_addr, + + .ndo_vlan_rx_register = e1000_vlan_rx_register, + .ndo_vlan_rx_add_vid = e1000_vlan_rx_add_vid, + .ndo_vlan_rx_kill_vid = e1000_vlan_rx_kill_vid, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = e1000_netpoll, +#endif +}; + +/** + * ec_poll - Ethercat poll Routine + * @netdev: net device structure + * + * This function can never fail. + * + **/ +void ec_poll(struct net_device *netdev) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + + if (jiffies - adapter->ec_watchdog_jiffies >= 2 * HZ) { + e1000_watchdog((unsigned long) adapter); + adapter->ec_watchdog_jiffies = jiffies; + } + +#ifdef CONFIG_PCI_MSI + e1000_intr_msi(0,netdev); +#else + e1000_intr(0,netdev); +#endif +} + +/** + * e1000_probe - Device Initialization Routine + * @pdev: PCI device information struct + * @ent: entry in e1000_pci_tbl + * + * Returns 0 on success, negative on failure + * + * e1000_probe initializes an adapter identified by a pci_dev structure. + * The OS initialization, configuring of the adapter private structure, + * and a hardware reset occur. + **/ +static int __devinit e1000_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *netdev; + struct e1000_adapter *adapter; + struct e1000_hw *hw; + const struct e1000_info *ei = e1000_info_tbl[ent->driver_data]; + resource_size_t mmio_start, mmio_len; + resource_size_t flash_start, flash_len; + + static int cards_found; + int i, err, pci_using_dac; + u16 eeprom_data = 0; + u16 eeprom_apme_mask = E1000_EEPROM_APME; + + if (ei->flags2 & FLAG2_DISABLE_ASPM_L1) + e1000e_disable_aspm(pdev, PCIE_LINK_STATE_L1); + + err = pci_enable_device_mem(pdev); + if (err) + return err; + + pci_using_dac = 0; + err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); + if (!err) { + err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); + if (!err) + pci_using_dac = 1; + } else { + err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (err) { + err = dma_set_coherent_mask(&pdev->dev, + DMA_BIT_MASK(32)); + if (err) { + dev_err(&pdev->dev, "No usable DMA " + "configuration, aborting\n"); + goto err_dma; + } + } + } + + err = pci_request_selected_regions_exclusive(pdev, + pci_select_bars(pdev, IORESOURCE_MEM), + e1000e_driver_name); + if (err) + goto err_pci_reg; + + /* AER (Advanced Error Reporting) hooks */ + pci_enable_pcie_error_reporting(pdev); + + pci_set_master(pdev); + /* PCI config space info */ + err = pci_save_state(pdev); + if (err) + goto err_alloc_etherdev; + + err = -ENOMEM; + netdev = alloc_etherdev(sizeof(struct e1000_adapter)); + if (!netdev) + goto err_alloc_etherdev; + + SET_NETDEV_DEV(netdev, &pdev->dev); + + netdev->irq = pdev->irq; + + pci_set_drvdata(pdev, netdev); + adapter = netdev_priv(netdev); + hw = &adapter->hw; + adapter->netdev = netdev; + adapter->pdev = pdev; + adapter->ei = ei; + adapter->pba = ei->pba; + adapter->flags = ei->flags; + adapter->flags2 = ei->flags2; + adapter->hw.adapter = adapter; + adapter->hw.mac.type = ei->mac; + adapter->max_hw_frame_size = ei->max_hw_frame_size; + adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1; + + mmio_start = pci_resource_start(pdev, 0); + mmio_len = pci_resource_len(pdev, 0); + + err = -EIO; + adapter->hw.hw_addr = ioremap(mmio_start, mmio_len); + if (!adapter->hw.hw_addr) + goto err_ioremap; + + if ((adapter->flags & FLAG_HAS_FLASH) && + (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) { + flash_start = pci_resource_start(pdev, 1); + flash_len = pci_resource_len(pdev, 1); + adapter->hw.flash_address = ioremap(flash_start, flash_len); + if (!adapter->hw.flash_address) + goto err_flashmap; + } + + /* construct the net_device struct */ + netdev->netdev_ops = &e1000e_netdev_ops; + e1000e_set_ethtool_ops(netdev); + netdev->watchdog_timeo = 5 * HZ; + netif_napi_add(netdev, &adapter->napi, e1000_clean, 64); + strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1); + + netdev->mem_start = mmio_start; + netdev->mem_end = mmio_start + mmio_len; + + adapter->bd_number = cards_found++; + + e1000e_check_options(adapter); + + /* setup adapter struct */ + err = e1000_sw_init(adapter); + if (err) + goto err_sw_init; + + err = -EIO; + + memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops)); + memcpy(&hw->nvm.ops, ei->nvm_ops, sizeof(hw->nvm.ops)); + memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops)); + + err = ei->get_variants(adapter); + if (err) + goto err_hw_init; + + if ((adapter->flags & FLAG_IS_ICH) && + (adapter->flags & FLAG_READ_ONLY_NVM)) + e1000e_write_protect_nvm_ich8lan(&adapter->hw); + + hw->mac.ops.get_bus_info(&adapter->hw); + + adapter->hw.phy.autoneg_wait_to_complete = 0; + + /* Copper options */ + if (adapter->hw.phy.media_type == e1000_media_type_copper) { + adapter->hw.phy.mdix = AUTO_ALL_MODES; + adapter->hw.phy.disable_polarity_correction = 0; + adapter->hw.phy.ms_type = e1000_ms_hw_default; + } + + if (e1000_check_reset_block(&adapter->hw)) + e_info("PHY reset is blocked due to SOL/IDER session.\n"); + + netdev->features = NETIF_F_SG | + NETIF_F_HW_CSUM | + NETIF_F_HW_VLAN_TX | + NETIF_F_HW_VLAN_RX; + + if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) + netdev->features |= NETIF_F_HW_VLAN_FILTER; + + netdev->features |= NETIF_F_TSO; + netdev->features |= NETIF_F_TSO6; + + netdev->vlan_features |= NETIF_F_TSO; + netdev->vlan_features |= NETIF_F_TSO6; + netdev->vlan_features |= NETIF_F_HW_CSUM; + netdev->vlan_features |= NETIF_F_SG; + + if (pci_using_dac) + netdev->features |= NETIF_F_HIGHDMA; + + if (e1000e_enable_mng_pass_thru(&adapter->hw)) + adapter->flags |= FLAG_MNG_PT_ENABLED; + + /* + * before reading the NVM, reset the controller to + * put the device in a known good starting state + */ + adapter->hw.mac.ops.reset_hw(&adapter->hw); + + /* + * systems with ASPM and others may see the checksum fail on the first + * attempt. Let's give it a few tries + */ + for (i = 0;; i++) { + if (e1000_validate_nvm_checksum(&adapter->hw) >= 0) + break; + if (i == 2) { + e_err("The NVM Checksum Is Not Valid\n"); + err = -EIO; + goto err_eeprom; + } + } + + e1000_eeprom_checks(adapter); + + /* copy the MAC address */ + if (e1000e_read_mac_addr(&adapter->hw)) + e_err("NVM Read Error while reading MAC address\n"); + + memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len); + memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len); + + if (!is_valid_ether_addr(netdev->perm_addr)) { + e_err("Invalid MAC Address: %pM\n", netdev->perm_addr); + err = -EIO; + goto err_eeprom; + } + + init_timer(&adapter->watchdog_timer); + adapter->watchdog_timer.function = &e1000_watchdog; + adapter->watchdog_timer.data = (unsigned long) adapter; + + init_timer(&adapter->phy_info_timer); + adapter->phy_info_timer.function = &e1000_update_phy_info; + adapter->phy_info_timer.data = (unsigned long) adapter; + + INIT_WORK(&adapter->reset_task, e1000_reset_task); + INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task); + INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround); + INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task); + INIT_WORK(&adapter->print_hang_task, e1000_print_hw_hang); + + /* Initialize link parameters. User can change them with ethtool */ + adapter->hw.mac.autoneg = 1; + adapter->fc_autoneg = 1; + adapter->hw.fc.requested_mode = e1000_fc_default; + adapter->hw.fc.current_mode = e1000_fc_default; + adapter->hw.phy.autoneg_advertised = 0x2f; + + /* ring size defaults */ + adapter->rx_ring->count = 256; + adapter->tx_ring->count = 256; + + /* + * Initial Wake on LAN setting - If APM wake is enabled in + * the EEPROM, enable the ACPI Magic Packet filter + */ + if (adapter->flags & FLAG_APME_IN_WUC) { + /* APME bit in EEPROM is mapped to WUC.APME */ + eeprom_data = er32(WUC); + eeprom_apme_mask = E1000_WUC_APME; + if (eeprom_data & E1000_WUC_PHY_WAKE) + adapter->flags2 |= FLAG2_HAS_PHY_WAKEUP; + } else if (adapter->flags & FLAG_APME_IN_CTRL3) { + if (adapter->flags & FLAG_APME_CHECK_PORT_B && + (adapter->hw.bus.func == 1)) + e1000_read_nvm(&adapter->hw, + NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data); + else + e1000_read_nvm(&adapter->hw, + NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data); + } + + /* fetch WoL from EEPROM */ + if (eeprom_data & eeprom_apme_mask) + adapter->eeprom_wol |= E1000_WUFC_MAG; + + /* + * now that we have the eeprom settings, apply the special cases + * where the eeprom may be wrong or the board simply won't support + * wake on lan on a particular port + */ + if (!(adapter->flags & FLAG_HAS_WOL)) + adapter->eeprom_wol = 0; + + /* initialize the wol settings based on the eeprom settings */ + adapter->wol = adapter->eeprom_wol; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + + /* save off EEPROM version number */ + e1000_read_nvm(&adapter->hw, 5, 1, &adapter->eeprom_vers); + + /* reset the hardware with the new settings */ + e1000e_reset(adapter); + + /* + * If the controller has AMT, do not set DRV_LOAD until the interface + * is up. For all other cases, let the f/w know that the h/w is now + * under the control of the driver. + */ + if (!(adapter->flags & FLAG_HAS_AMT)) + e1000_get_hw_control(adapter); + + adapter->ecdev = ecdev_offer(netdev,ec_poll,THIS_MODULE); + if (adapter->ecdev) { + if (ecdev_open(adapter->ecdev)) { + ecdev_withdraw(adapter->ecdev); + goto err_register; + } + } else { + strcpy(netdev->name, "eth%d"); + err = register_netdev(netdev); + if (err) + goto err_register; + + /* carrier off reporting is important to ethtool even BEFORE open */ + netif_carrier_off(netdev); + } + + e1000_print_device_info(adapter); + + if (pci_dev_run_wake(pdev)) { + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + } + pm_schedule_suspend(&pdev->dev, MSEC_PER_SEC); + + return 0; + +err_register: + if (!(adapter->flags & FLAG_HAS_AMT)) + e1000_release_hw_control(adapter); +err_eeprom: + if (!e1000_check_reset_block(&adapter->hw)) + e1000_phy_hw_reset(&adapter->hw); +err_hw_init: + + kfree(adapter->tx_ring); + kfree(adapter->rx_ring); +err_sw_init: + if (adapter->hw.flash_address) + iounmap(adapter->hw.flash_address); + e1000e_reset_interrupt_capability(adapter); +err_flashmap: + iounmap(adapter->hw.hw_addr); +err_ioremap: + free_netdev(netdev); +err_alloc_etherdev: + pci_release_selected_regions(pdev, + pci_select_bars(pdev, IORESOURCE_MEM)); +err_pci_reg: +err_dma: + pci_disable_device(pdev); + return err; +} + +/** + * e1000_remove - Device Removal Routine + * @pdev: PCI device information struct + * + * e1000_remove is called by the PCI subsystem to alert the driver + * that it should release a PCI device. The could be caused by a + * Hot-Plug event, or because the driver is going to be removed from + * memory. + **/ +static void __devexit e1000_remove(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct e1000_adapter *adapter = netdev_priv(netdev); + bool down = test_bit(__E1000_DOWN, &adapter->state); + + pm_runtime_get_sync(&pdev->dev); + + /* + * flush_scheduled work may reschedule our watchdog task, so + * explicitly disable watchdog tasks from being rescheduled + */ + if (!down) + set_bit(__E1000_DOWN, &adapter->state); + del_timer_sync(&adapter->watchdog_timer); + del_timer_sync(&adapter->phy_info_timer); + + cancel_work_sync(&adapter->reset_task); + cancel_work_sync(&adapter->watchdog_task); + cancel_work_sync(&adapter->downshift_task); + cancel_work_sync(&adapter->update_phy_task); + cancel_work_sync(&adapter->print_hang_task); + flush_scheduled_work(); + + if (!(netdev->flags & IFF_UP)) + e1000_power_down_phy(adapter); + + /* Don't lie to e1000_close() down the road. */ + if (!down) + clear_bit(__E1000_DOWN, &adapter->state); + + if (adapter->ecdev) { + ecdev_close(adapter->ecdev); + ecdev_withdraw(adapter->ecdev); + } else { + unregister_netdev(netdev); + } + + if (pci_dev_run_wake(pdev)) { + pm_runtime_disable(&pdev->dev); + pm_runtime_set_suspended(&pdev->dev); + } + pm_runtime_put_noidle(&pdev->dev); + + /* + * Release control of h/w to f/w. If f/w is AMT enabled, this + * would have already happened in close and is redundant. + */ + e1000_release_hw_control(adapter); + + e1000e_reset_interrupt_capability(adapter); + kfree(adapter->tx_ring); + kfree(adapter->rx_ring); + + iounmap(adapter->hw.hw_addr); + if (adapter->hw.flash_address) + iounmap(adapter->hw.flash_address); + pci_release_selected_regions(pdev, + pci_select_bars(pdev, IORESOURCE_MEM)); + + free_netdev(netdev); + + /* AER disable */ + pci_disable_pcie_error_reporting(pdev); + + pci_disable_device(pdev); +} + +/* PCI Error Recovery (ERS) */ +static struct pci_error_handlers e1000_err_handler = { + .error_detected = e1000_io_error_detected, + .slot_reset = e1000_io_slot_reset, + .resume = e1000_io_resume, +}; + +static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = { + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_COPPER), board_82571 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_FIBER), board_82571 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER), board_82571 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER_LP), board_82571 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_FIBER), board_82571 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES), board_82571 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_DUAL), board_82571 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_QUAD), board_82571 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571PT_QUAD_COPPER), board_82571 }, + + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI), board_82572 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_COPPER), board_82572 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_FIBER), board_82572 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_SERDES), board_82572 }, + + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E), board_82573 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E_IAMT), board_82573 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573L), board_82573 }, + + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574L), board_82574 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574LA), board_82574 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82583V), board_82583 }, + + { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_DPT), + board_80003es2lan }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_SPT), + board_80003es2lan }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_DPT), + board_80003es2lan }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_SPT), + board_80003es2lan }, + + { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE), board_ich8lan }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_G), board_ich8lan }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_GT), board_ich8lan }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_AMT), board_ich8lan }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_C), board_ich8lan }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M), board_ich8lan }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M_AMT), board_ich8lan }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_82567V_3), board_ich8lan }, + + { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE), board_ich9lan }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_G), board_ich9lan }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_GT), board_ich9lan }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_AMT), board_ich9lan }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_C), board_ich9lan }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_BM), board_ich9lan }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M), board_ich9lan }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_AMT), board_ich9lan }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_V), board_ich9lan }, + + { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LM), board_ich9lan }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LF), board_ich9lan }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_V), board_ich9lan }, + + { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LM), board_ich10lan }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LF), board_ich10lan }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_V), board_ich10lan }, + + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LM), board_pchlan }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LC), board_pchlan }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DM), board_pchlan }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DC), board_pchlan }, + + { } /* terminate list */ +}; +//MODULE_DEVICE_TABLE(pci, e1000_pci_tbl); + +#ifdef CONFIG_PM_OPS +static const struct dev_pm_ops e1000_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(e1000_suspend, e1000_resume) + SET_RUNTIME_PM_OPS(e1000_runtime_suspend, + e1000_runtime_resume, e1000_idle) +}; +#endif + +/* PCI Device API Driver */ +static struct pci_driver e1000_driver = { + .name = e1000e_driver_name, + .id_table = e1000_pci_tbl, + .probe = e1000_probe, + .remove = __devexit_p(e1000_remove), +#ifdef CONFIG_PM_OPS + .driver.pm = &e1000_pm_ops, +#endif + .shutdown = e1000_shutdown, + .err_handler = &e1000_err_handler +}; + +/** + * e1000_init_module - Driver Registration Routine + * + * e1000_init_module is the first routine called when the driver is + * loaded. All it does is register with the PCI subsystem. + **/ +static int __init e1000_init_module(void) +{ + int ret; + pr_info("EtherCAT-capable Intel(R) PRO/1000 Network Driver - %s\n", + e1000e_driver_version); + pr_info("Copyright (c) 1999 - 2009 Intel Corporation.\n"); + ret = pci_register_driver(&e1000_driver); + + return ret; +} +module_init(e1000_init_module); + +/** + * e1000_exit_module - Driver Exit Cleanup Routine + * + * e1000_exit_module is called just before the driver is removed + * from memory. + **/ +static void __exit e1000_exit_module(void) +{ + pci_unregister_driver(&e1000_driver); +} +module_exit(e1000_exit_module); + + +MODULE_AUTHOR("Intel Corporation, "); +MODULE_DESCRIPTION("Ethercat-capable Intel(R) PRO/1000 Network Driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +/* e1000_main.c */