diff -r afd76ee3aa87 -r 792892ab4806 devices/e1000e/ich8lan-3.16-ethercat.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e1000e/ich8lan-3.16-ethercat.h	Tue Oct 28 16:54:59 2014 +0100
@@ -0,0 +1,290 @@
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#ifndef _E1000E_ICH8LAN_H_
+#define _E1000E_ICH8LAN_H_
+
+#define ICH_FLASH_GFPREG		0x0000
+#define ICH_FLASH_HSFSTS		0x0004
+#define ICH_FLASH_HSFCTL		0x0006
+#define ICH_FLASH_FADDR			0x0008
+#define ICH_FLASH_FDATA0		0x0010
+#define ICH_FLASH_PR0			0x0074
+
+/* Requires up to 10 seconds when MNG might be accessing part. */
+#define ICH_FLASH_READ_COMMAND_TIMEOUT	10000000
+#define ICH_FLASH_WRITE_COMMAND_TIMEOUT	10000000
+#define ICH_FLASH_ERASE_COMMAND_TIMEOUT	10000000
+#define ICH_FLASH_LINEAR_ADDR_MASK	0x00FFFFFF
+#define ICH_FLASH_CYCLE_REPEAT_COUNT	10
+
+#define ICH_CYCLE_READ			0
+#define ICH_CYCLE_WRITE			2
+#define ICH_CYCLE_ERASE			3
+
+#define FLASH_GFPREG_BASE_MASK		0x1FFF
+#define FLASH_SECTOR_ADDR_SHIFT		12
+
+#define ICH_FLASH_SEG_SIZE_256		256
+#define ICH_FLASH_SEG_SIZE_4K		4096
+#define ICH_FLASH_SEG_SIZE_8K		8192
+#define ICH_FLASH_SEG_SIZE_64K		65536
+
+#define E1000_ICH_FWSM_RSPCIPHY	0x00000040	/* Reset PHY on PCI Reset */
+/* FW established a valid mode */
+#define E1000_ICH_FWSM_FW_VALID	0x00008000
+#define E1000_ICH_FWSM_PCIM2PCI	0x01000000	/* ME PCIm-to-PCI active */
+#define E1000_ICH_FWSM_PCIM2PCI_COUNT	2000
+
+#define E1000_ICH_MNG_IAMT_MODE		0x2
+
+#define E1000_FWSM_WLOCK_MAC_MASK	0x0380
+#define E1000_FWSM_WLOCK_MAC_SHIFT	7
+#define E1000_FWSM_ULP_CFG_DONE		0x00000400	/* Low power cfg done */
+
+/* Shared Receive Address Registers */
+#define E1000_SHRAL_PCH_LPT(_i)		(0x05408 + ((_i) * 8))
+#define E1000_SHRAH_PCH_LPT(_i)		(0x0540C + ((_i) * 8))
+
+#define E1000_H2ME		0x05B50	/* Host to ME */
+#define E1000_H2ME_ULP		0x00000800	/* ULP Indication Bit */
+#define E1000_H2ME_ENFORCE_SETTINGS	0x00001000	/* Enforce Settings */
+
+#define ID_LED_DEFAULT_ICH8LAN	((ID_LED_DEF1_DEF2 << 12) | \
+				 (ID_LED_OFF1_OFF2 <<  8) | \
+				 (ID_LED_OFF1_ON2  <<  4) | \
+				 (ID_LED_DEF1_DEF2))
+
+#define E1000_ICH_NVM_SIG_WORD		0x13
+#define E1000_ICH_NVM_SIG_MASK		0xC000
+#define E1000_ICH_NVM_VALID_SIG_MASK	0xC0
+#define E1000_ICH_NVM_SIG_VALUE		0x80
+
+#define E1000_ICH8_LAN_INIT_TIMEOUT	1500
+
+/* FEXT register bit definition */
+#define E1000_FEXT_PHY_CABLE_DISCONNECTED	0x00000004
+
+#define E1000_FEXTNVM_SW_CONFIG		1
+#define E1000_FEXTNVM_SW_CONFIG_ICH8M	(1 << 27)	/* different on ICH8M */
+
+#define E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK	0x0C000000
+#define E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC	0x08000000
+
+#define E1000_FEXTNVM4_BEACON_DURATION_MASK	0x7
+#define E1000_FEXTNVM4_BEACON_DURATION_8USEC	0x7
+#define E1000_FEXTNVM4_BEACON_DURATION_16USEC	0x3
+
+#define E1000_FEXTNVM6_REQ_PLL_CLK	0x00000100
+#define E1000_FEXTNVM6_ENABLE_K1_ENTRY_CONDITION	0x00000200
+
+#define E1000_FEXTNVM7_DISABLE_SMB_PERST	0x00000020
+
+#define PCIE_ICH8_SNOOP_ALL	PCIE_NO_SNOOP_ALL
+
+#define E1000_ICH_RAR_ENTRIES	7
+#define E1000_PCH2_RAR_ENTRIES	5	/* RAR[0], SHRA[0-3] */
+#define E1000_PCH_LPT_RAR_ENTRIES	12	/* RAR[0], SHRA[0-10] */
+
+#define PHY_PAGE_SHIFT		5
+#define PHY_REG(page, reg)	(((page) << PHY_PAGE_SHIFT) | \
+				 ((reg) & MAX_PHY_REG_ADDRESS))
+#define IGP3_KMRN_DIAG	PHY_REG(770, 19)	/* KMRN Diagnostic */
+#define IGP3_VR_CTRL	PHY_REG(776, 18)	/* Voltage Regulator Control */
+
+#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS		0x0002
+#define IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK	0x0300
+#define IGP3_VR_CTRL_MODE_SHUTDOWN		0x0200
+
+/* PHY Wakeup Registers and defines */
+#define BM_PORT_GEN_CFG		PHY_REG(BM_PORT_CTRL_PAGE, 17)
+#define BM_RCTL			PHY_REG(BM_WUC_PAGE, 0)
+#define BM_WUC			PHY_REG(BM_WUC_PAGE, 1)
+#define BM_WUFC			PHY_REG(BM_WUC_PAGE, 2)
+#define BM_WUS			PHY_REG(BM_WUC_PAGE, 3)
+#define BM_RAR_L(_i)		(BM_PHY_REG(BM_WUC_PAGE, 16 + ((_i) << 2)))
+#define BM_RAR_M(_i)		(BM_PHY_REG(BM_WUC_PAGE, 17 + ((_i) << 2)))
+#define BM_RAR_H(_i)		(BM_PHY_REG(BM_WUC_PAGE, 18 + ((_i) << 2)))
+#define BM_RAR_CTRL(_i)		(BM_PHY_REG(BM_WUC_PAGE, 19 + ((_i) << 2)))
+#define BM_MTA(_i)		(BM_PHY_REG(BM_WUC_PAGE, 128 + ((_i) << 1)))
+
+#define BM_RCTL_UPE		0x0001	/* Unicast Promiscuous Mode */
+#define BM_RCTL_MPE		0x0002	/* Multicast Promiscuous Mode */
+#define BM_RCTL_MO_SHIFT	3	/* Multicast Offset Shift */
+#define BM_RCTL_MO_MASK		(3 << 3)	/* Multicast Offset Mask */
+#define BM_RCTL_BAM		0x0020	/* Broadcast Accept Mode */
+#define BM_RCTL_PMCF		0x0040	/* Pass MAC Control Frames */
+#define BM_RCTL_RFCE		0x0080	/* Rx Flow Control Enable */
+
+#define HV_LED_CONFIG		PHY_REG(768, 30)	/* LED Configuration */
+#define HV_MUX_DATA_CTRL	PHY_REG(776, 16)
+#define HV_MUX_DATA_CTRL_GEN_TO_MAC	0x0400
+#define HV_MUX_DATA_CTRL_FORCE_SPEED	0x0004
+#define HV_STATS_PAGE	778
+/* Half-duplex collision counts */
+#define HV_SCC_UPPER	PHY_REG(HV_STATS_PAGE, 16)	/* Single Collision */
+#define HV_SCC_LOWER	PHY_REG(HV_STATS_PAGE, 17)
+#define HV_ECOL_UPPER	PHY_REG(HV_STATS_PAGE, 18)	/* Excessive Coll. */
+#define HV_ECOL_LOWER	PHY_REG(HV_STATS_PAGE, 19)
+#define HV_MCC_UPPER	PHY_REG(HV_STATS_PAGE, 20)	/* Multiple Collision */
+#define HV_MCC_LOWER	PHY_REG(HV_STATS_PAGE, 21)
+#define HV_LATECOL_UPPER PHY_REG(HV_STATS_PAGE, 23)	/* Late Collision */
+#define HV_LATECOL_LOWER PHY_REG(HV_STATS_PAGE, 24)
+#define HV_COLC_UPPER	PHY_REG(HV_STATS_PAGE, 25)	/* Collision */
+#define HV_COLC_LOWER	PHY_REG(HV_STATS_PAGE, 26)
+#define HV_DC_UPPER	PHY_REG(HV_STATS_PAGE, 27)	/* Defer Count */
+#define HV_DC_LOWER	PHY_REG(HV_STATS_PAGE, 28)
+#define HV_TNCRS_UPPER	PHY_REG(HV_STATS_PAGE, 29)	/* Tx with no CRS */
+#define HV_TNCRS_LOWER	PHY_REG(HV_STATS_PAGE, 30)
+
+#define E1000_FCRTV_PCH	0x05F40	/* PCH Flow Control Refresh Timer Value */
+
+#define E1000_NVM_K1_CONFIG	0x1B	/* NVM K1 Config Word */
+#define E1000_NVM_K1_ENABLE	0x1	/* NVM Enable K1 bit */
+
+/* SMBus Control Phy Register */
+#define CV_SMB_CTRL		PHY_REG(769, 23)
+#define CV_SMB_CTRL_FORCE_SMBUS	0x0001
+
+/* I218 Ultra Low Power Configuration 1 Register */
+#define I218_ULP_CONFIG1		PHY_REG(779, 16)
+#define I218_ULP_CONFIG1_START		0x0001	/* Start auto ULP config */
+#define I218_ULP_CONFIG1_IND		0x0004	/* Pwr up from ULP indication */
+#define I218_ULP_CONFIG1_STICKY_ULP	0x0010	/* Set sticky ULP mode */
+#define I218_ULP_CONFIG1_INBAND_EXIT	0x0020	/* Inband on ULP exit */
+#define I218_ULP_CONFIG1_WOL_HOST	0x0040	/* WoL Host on ULP exit */
+#define I218_ULP_CONFIG1_RESET_TO_SMBUS	0x0100	/* Reset to SMBus mode */
+#define I218_ULP_CONFIG1_DISABLE_SMB_PERST	0x1000	/* Disable on PERST# */
+
+/* SMBus Address Phy Register */
+#define HV_SMB_ADDR		PHY_REG(768, 26)
+#define HV_SMB_ADDR_MASK	0x007F
+#define HV_SMB_ADDR_PEC_EN	0x0200
+#define HV_SMB_ADDR_VALID	0x0080
+#define HV_SMB_ADDR_FREQ_MASK		0x1100
+#define HV_SMB_ADDR_FREQ_LOW_SHIFT	8
+#define HV_SMB_ADDR_FREQ_HIGH_SHIFT	12
+
+/* Strapping Option Register - RO */
+#define E1000_STRAP			0x0000C
+#define E1000_STRAP_SMBUS_ADDRESS_MASK	0x00FE0000
+#define E1000_STRAP_SMBUS_ADDRESS_SHIFT	17
+#define E1000_STRAP_SMT_FREQ_MASK	0x00003000
+#define E1000_STRAP_SMT_FREQ_SHIFT	12
+
+/* OEM Bits Phy Register */
+#define HV_OEM_BITS		PHY_REG(768, 25)
+#define HV_OEM_BITS_LPLU	0x0004	/* Low Power Link Up */
+#define HV_OEM_BITS_GBE_DIS	0x0040	/* Gigabit Disable */
+#define HV_OEM_BITS_RESTART_AN	0x0400	/* Restart Auto-negotiation */
+
+/* KMRN Mode Control */
+#define HV_KMRN_MODE_CTRL	PHY_REG(769, 16)
+#define HV_KMRN_MDIO_SLOW	0x0400
+
+/* KMRN FIFO Control and Status */
+#define HV_KMRN_FIFO_CTRLSTA			PHY_REG(770, 16)
+#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK	0x7000
+#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT	12
+
+/* PHY Power Management Control */
+#define HV_PM_CTRL		PHY_REG(770, 17)
+#define HV_PM_CTRL_PLL_STOP_IN_K1_GIGA	0x100
+#define HV_PM_CTRL_K1_ENABLE		0x4000
+
+#define SW_FLAG_TIMEOUT		1000	/* SW Semaphore flag timeout in ms */
+
+/* Inband Control */
+#define I217_INBAND_CTRL				PHY_REG(770, 18)
+#define I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_MASK	0x3F00
+#define I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_SHIFT	8
+
+/* PHY Low Power Idle Control */
+#define I82579_LPI_CTRL				PHY_REG(772, 20)
+#define I82579_LPI_CTRL_100_ENABLE		0x2000
+#define I82579_LPI_CTRL_1000_ENABLE		0x4000
+#define I82579_LPI_CTRL_ENABLE_MASK		0x6000
+#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT	0x80
+
+/* Extended Management Interface (EMI) Registers */
+#define I82579_EMI_ADDR		0x10
+#define I82579_EMI_DATA		0x11
+#define I82579_LPI_UPDATE_TIMER	0x4805	/* in 40ns units + 40 ns base value */
+#define I82579_MSE_THRESHOLD	0x084F	/* 82579 Mean Square Error Threshold */
+#define I82577_MSE_THRESHOLD	0x0887	/* 82577 Mean Square Error Threshold */
+#define I82579_MSE_LINK_DOWN	0x2411	/* MSE count before dropping link */
+#define I82579_RX_CONFIG		0x3412	/* Receive configuration */
+#define I82579_LPI_PLL_SHUT		0x4412	/* LPI PLL Shut Enable */
+#define I82579_EEE_PCS_STATUS		0x182E	/* IEEE MMD Register 3.1 >> 8 */
+#define I82579_EEE_CAPABILITY		0x0410	/* IEEE MMD Register 3.20 */
+#define I82579_EEE_ADVERTISEMENT	0x040E	/* IEEE MMD Register 7.60 */
+#define I82579_EEE_LP_ABILITY		0x040F	/* IEEE MMD Register 7.61 */
+#define I82579_EEE_100_SUPPORTED	(1 << 1)	/* 100BaseTx EEE */
+#define I82579_EEE_1000_SUPPORTED	(1 << 2)	/* 1000BaseTx EEE */
+#define I82579_LPI_100_PLL_SHUT	(1 << 2)	/* 100M LPI PLL Shut Enabled */
+#define I217_EEE_PCS_STATUS	0x9401	/* IEEE MMD Register 3.1 */
+#define I217_EEE_CAPABILITY	0x8000	/* IEEE MMD Register 3.20 */
+#define I217_EEE_ADVERTISEMENT	0x8001	/* IEEE MMD Register 7.60 */
+#define I217_EEE_LP_ABILITY	0x8002	/* IEEE MMD Register 7.61 */
+#define I217_RX_CONFIG		0xB20C	/* Receive configuration */
+
+#define E1000_EEE_RX_LPI_RCVD	0x0400	/* Tx LP idle received */
+#define E1000_EEE_TX_LPI_RCVD	0x0800	/* Rx LP idle received */
+
+/* Intel Rapid Start Technology Support */
+#define I217_PROXY_CTRL		BM_PHY_REG(BM_WUC_PAGE, 70)
+#define I217_PROXY_CTRL_AUTO_DISABLE	0x0080
+#define I217_SxCTRL			PHY_REG(BM_PORT_CTRL_PAGE, 28)
+#define I217_SxCTRL_ENABLE_LPI_RESET	0x1000
+#define I217_CGFREG			PHY_REG(772, 29)
+#define I217_CGFREG_ENABLE_MTA_RESET	0x0002
+#define I217_MEMPWR			PHY_REG(772, 26)
+#define I217_MEMPWR_DISABLE_SMB_RELEASE	0x0010
+
+/* Receive Address Initial CRC Calculation */
+#define E1000_PCH_RAICC(_n)	(0x05F50 + ((_n) * 4))
+
+/* Latency Tolerance Reporting */
+#define E1000_LTRV			0x000F8
+#define E1000_LTRV_SCALE_MAX		5
+#define E1000_LTRV_SCALE_FACTOR		5
+#define E1000_LTRV_REQ_SHIFT		15
+#define E1000_LTRV_NOSNOOP_SHIFT	16
+#define E1000_LTRV_SEND			(1 << 30)
+
+/* Proprietary Latency Tolerance Reporting PCI Capability */
+#define E1000_PCI_LTR_CAP_LPT		0xA8
+
+void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw);
+void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
+						  bool state);
+void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw);
+void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw);
+void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw);
+void e1000_resume_workarounds_pchlan(struct e1000_hw *hw);
+s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable);
+void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw);
+s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable);
+s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data);
+s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data);
+s32 e1000_set_eee_pchlan(struct e1000_hw *hw);
+s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx);
+#endif /* _E1000E_ICH8LAN_H_ */