diff -r 7e8a2e3dd3fb -r 0f65ac78c112 script/sysconfig --- a/script/sysconfig Tue Feb 13 11:54:38 2007 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,58 +0,0 @@ -#------------------------------------------------------------------------------ -# -# EtherCAT sysconfig file -# -# $Id$ -# -#------------------------------------------------------------------------------ - -# -# PCI index of the (RTL8139-)EtherCAT device -# Setting this is mandatory for the EtherCAT init script! -# -#DEVICE_INDEX=99 - -# -# Number of Ethernet-over-EtherCAT interfaces every master shall create -# on startup. Default is 0. -# -#EOE_INTERFACES=0 - -# -# Bridge all EoE interfaces after master startup -# This variable shall contain the name of the EoE bridge to set up. -# If the variable is empty or undefined, no EoE bridge will be built. -# -#EOE_BRIDGE=eoebr0 - -# -# IP address of the EoE bridge -# Set both EOE_IP_ADDRESS and EOE_IP_NETMASK to let the local host communicate -# with devices on the EoE bridge. -# -#EOE_IP_ADDRESS=192.168.X.X - -# -# IP netmask of the EoE bridge -# See EOE_IP_ADDRESS. -# -#EOE_IP_NETMASK=255.255.255.0 - -# -# Renew default gateway after bridge installation. -# Set this to the new default gateway, if the default route shall -# be renewed after the bridge has been installed. -# -#EOE_GATEWAY=192.168.X.X - -# -# List of extra interfaces to include in the EoE bridge. -# Set this to interconnect the EoE bridge with other local interfaces. -# If EOE_BRIDGE is empty or undefined, setting this variable has no effect. -# Important: The IP address of these interfaces will be cleared. Set -# EOE_IP_ADDRESS and EOE_IP_NETMASK accordingly to enable IP traffic to -# extra interfaces. -# -#EOE_EXTRA_INTERFACES=eth0 - -#------------------------------------------------------------------------------