fp@2133: #------------------------------------------------------------------------------
fp@2133: #
fp@2133: #  $Id$
fp@2133: #
fp@2685: #  Copyright (C) 2006-2017  Florian Pose, Ingenieurgemeinschaft IgH
fp@2133: #
fp@2133: #  This file is part of the IgH EtherCAT Master.
fp@2133: #
fp@2133: #  The IgH EtherCAT Master is free software; you can redistribute it and/or
fp@2133: #  modify it under the terms of the GNU General Public License version 2, as
fp@2133: #  published by the Free Software Foundation.
fp@2133: #
fp@2133: #  The IgH EtherCAT Master is distributed in the hope that it will be useful,
fp@2133: #  but WITHOUT ANY WARRANTY; without even the implied warranty of
fp@2133: #  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General
fp@2133: #  Public License for more details.
fp@2133: #
fp@2133: #  You should have received a copy of the GNU General Public License along
fp@2133: #  with the IgH EtherCAT Master; if not, write to the Free Software
fp@2133: #  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
fp@2133: #
fp@2133: #  ---
fp@2407: #
fp@2133: #  The license mentioned above concerns the source code only. Using the
fp@2133: #  EtherCAT technology and brand is only permitted in compliance with the
fp@2133: #  industrial property and similar rights of Beckhoff Automation GmbH.
fp@2133: #
fp@2133: #------------------------------------------------------------------------------
fp@2133: 
fp@2133: EXTRA_DIST = \
fp@2685: 	e1000_82575-3.18-ethercat.c
fp@2685: 	e1000_82575-3.18-ethercat.h
fp@2685: 	e1000_82575-3.18-orig.c
fp@2685: 	e1000_82575-3.18-orig.h
fp@2685: 	e1000_defines-3.18-ethercat.h
fp@2685: 	e1000_defines-3.18-orig.h
fp@2685: 	e1000_hw-3.18-ethercat.h
fp@2685: 	e1000_hw-3.18-orig.h
fp@2685: 	e1000_i210-3.18-ethercat.c
fp@2685: 	e1000_i210-3.18-ethercat.h
fp@2685: 	e1000_i210-3.18-orig.c
fp@2685: 	e1000_i210-3.18-orig.h
fp@2685: 	e1000_mac-3.18-ethercat.c
fp@2685: 	e1000_mac-3.18-ethercat.h
fp@2685: 	e1000_mac-3.18-orig.c
fp@2685: 	e1000_mac-3.18-orig.h
fp@2685: 	e1000_mbx-3.18-ethercat.c
fp@2685: 	e1000_mbx-3.18-ethercat.h
fp@2685: 	e1000_mbx-3.18-orig.c
fp@2685: 	e1000_mbx-3.18-orig.h
fp@2685: 	e1000_nvm-3.18-ethercat.c
fp@2685: 	e1000_nvm-3.18-ethercat.h
fp@2685: 	e1000_nvm-3.18-orig.c
fp@2685: 	e1000_nvm-3.18-orig.h
fp@2685: 	e1000_phy-3.18-ethercat.c
fp@2685: 	e1000_phy-3.18-ethercat.h
fp@2685: 	e1000_phy-3.18-orig.c
fp@2685: 	e1000_phy-3.18-orig.h
fp@2685: 	e1000_regs-3.18-ethercat.h
fp@2685: 	e1000_regs-3.18-orig.h
fp@2685: 	igb-3.18-ethercat.h
fp@2685: 	igb-3.18-orig.h
fp@2685: 	igb_ethtool-3.18-ethercat.c
fp@2685: 	igb_ethtool-3.18-orig.c
fp@2685: 	igb_hwmon-3.18-ethercat.c
fp@2685: 	igb_hwmon-3.18-orig.c
fp@2685: 	igb_main-3.18-ethercat.c
fp@2685: 	igb_main-3.18-orig.c
fp@2685: 	igb_ptp-3.18-ethercat.c
fp@2685: 	igb_ptp-3.18-orig.c
fp@2133: 
fp@2133: BUILT_SOURCES = \
fp@2407: 	Kbuild
fp@2133: 
fp@2133: modules:
fp@2133: 	$(MAKE) -C "$(LINUX_SOURCE_DIR)" M="@abs_srcdir@" modules
fp@2133: 
fp@2133: modules_install:
fp@2133: 	$(MAKE) -C "$(LINUX_SOURCE_DIR)" M="@abs_srcdir@" \
fp@2133: 		INSTALL_MOD_DIR="$(INSTALL_MOD_DIR)" modules_install
fp@2133: 
fp@2133: clean-local:
fp@2133: 	$(MAKE) -C "$(LINUX_SOURCE_DIR)" M="@abs_srcdir@" clean
fp@2133: 
fp@2133: #------------------------------------------------------------------------------