martin@1579: /******************************************************************************
martin@1579:  *
fp@1581:  *  $Id$
martin@1579:  *
martin@1579:  *  Copyright (C) 2006-2009  Florian Pose, Ingenieurgemeinschaft IgH
martin@1579:  *
martin@1579:  *  This file is part of the IgH EtherCAT Master.
martin@1579:  *
martin@1579:  *  The IgH EtherCAT Master is free software; you can redistribute it and/or
martin@1579:  *  modify it under the terms of the GNU General Public License version 2, as
martin@1579:  *  published by the Free Software Foundation.
martin@1579:  *
martin@1579:  *  The IgH EtherCAT Master is distributed in the hope that it will be useful,
martin@1579:  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
martin@1579:  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General
martin@1579:  *  Public License for more details.
martin@1579:  *
martin@1579:  *  You should have received a copy of the GNU General Public License along
martin@1579:  *  with the IgH EtherCAT Master; if not, write to the Free Software
martin@1579:  *  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
martin@1579:  *
martin@1579:  *  ---
martin@1579:  *
martin@1579:  *  The license mentioned above concerns the source code only. Using the
martin@1579:  *  EtherCAT technology and brand is only permitted in compliance with the
martin@1579:  *  industrial property and similar rights of Beckhoff Automation GmbH.
martin@1579:  *
martin@1579:  *****************************************************************************/
martin@1579: 
martin@1579: /**
martin@1579:    \file
martin@1579:    EtherCAT driver for RTL8139-compatible NICs.
martin@1579: */
martin@1579: 
martin@1579: /*****************************************************************************/
martin@1579: 
martin@1579: /*
martin@1579:   Former documentation:
martin@1579: 
martin@1579: 	8139too.c: A RealTek RTL-8139 Fast Ethernet driver for Linux.
martin@1579: 
martin@1579: 	Maintained by Jeff Garzik <jgarzik@pobox.com>
martin@1579: 	Copyright 2000-2002 Jeff Garzik
martin@1579: 
martin@1579: 	Much code comes from Donald Becker's rtl8139.c driver,
martin@1579: 	versions 1.13 and older.  This driver was originally based
martin@1579: 	on rtl8139.c version 1.07.  Header of rtl8139.c version 1.13:
martin@1579: 
martin@1579: 	-----<snip>-----
martin@1579: 
martin@1579:         	Written 1997-2001 by Donald Becker.
martin@1579: 		This software may be used and distributed according to the
martin@1579: 		terms of the GNU General Public License (GPL), incorporated
martin@1579: 		herein by reference.  Drivers based on or derived from this
martin@1579: 		code fall under the GPL and must retain the authorship,
martin@1579: 		copyright and license notice.  This file is not a complete
martin@1579: 		program and may only be used when the entire operating
martin@1579: 		system is licensed under the GPL.
martin@1579: 
martin@1579: 		This driver is for boards based on the RTL8129 and RTL8139
martin@1579: 		PCI ethernet chips.
martin@1579: 
martin@1579: 		The author may be reached as becker@scyld.com, or C/O Scyld
martin@1579: 		Computing Corporation 410 Severn Ave., Suite 210 Annapolis
martin@1579: 		MD 21403
martin@1579: 
martin@1579: 		Support and updates available at
martin@1579: 		http://www.scyld.com/network/rtl8139.html
martin@1579: 
martin@1579: 		Twister-tuning table provided by Kinston
martin@1579: 		<shangh@realtek.com.tw>.
martin@1579: 
martin@1579: 	-----<snip>-----
martin@1579: 
martin@1579: 	This software may be used and distributed according to the terms
martin@1579: 	of the GNU General Public License, incorporated herein by reference.
martin@1579: 
martin@1579: 	Contributors:
martin@1579: 
martin@1579: 		Donald Becker - he wrote the original driver, kudos to him!
martin@1579: 		(but please don't e-mail him for support, this isn't his driver)
martin@1579: 
martin@1579: 		Tigran Aivazian - bug fixes, skbuff free cleanup
martin@1579: 
martin@1579: 		Martin Mares - suggestions for PCI cleanup
martin@1579: 
martin@1579: 		David S. Miller - PCI DMA and softnet updates
martin@1579: 
martin@1579: 		Ernst Gill - fixes ported from BSD driver
martin@1579: 
martin@1579: 		Daniel Kobras - identified specific locations of
martin@1579: 			posted MMIO write bugginess
martin@1579: 
martin@1579: 		Gerard Sharp - bug fix, testing and feedback
martin@1579: 
martin@1579: 		David Ford - Rx ring wrap fix
martin@1579: 
martin@1579: 		Dan DeMaggio - swapped RTL8139 cards with me, and allowed me
martin@1579: 		to find and fix a crucial bug on older chipsets.
martin@1579: 
martin@1579: 		Donald Becker/Chris Butterworth/Marcus Westergren -
martin@1579: 		Noticed various Rx packet size-related buglets.
martin@1579: 
martin@1579: 		Santiago Garcia Mantinan - testing and feedback
martin@1579: 
martin@1579: 		Jens David - 2.2.x kernel backports
martin@1579: 
martin@1579: 		Martin Dennett - incredibly helpful insight on undocumented
martin@1579: 		features of the 8139 chips
martin@1579: 
martin@1579: 		Jean-Jacques Michel - bug fix
martin@1579: 
martin@1579: 		Tobias Ringström - Rx interrupt status checking suggestion
martin@1579: 
martin@1579: 		Andrew Morton - Clear blocked signals, avoid
martin@1579: 		buffer overrun setting current->comm.
martin@1579: 
martin@1579: 		Kalle Olavi Niemitalo - Wake-on-LAN ioctls
martin@1579: 
martin@1579: 		Robert Kuebel - Save kernel thread from dying on any signal.
martin@1579: 
martin@1579: 	Submitting bug reports:
martin@1579: 
martin@1579: 		"rtl8139-diag -mmmaaavvveefN" output
martin@1579: 		enable RTL8139_DEBUG below, and look at 'dmesg' or kernel log
martin@1579: 
martin@1579: */
martin@1579: 
martin@1579: #define DRV_NAME	"ec_8139too"
martin@1579: #define DRV_VERSION	"0.9.28"
martin@1579: 
martin@1579: 
martin@1579: #include <linux/module.h>
martin@1579: #include <linux/kernel.h>
martin@1579: #include <linux/compiler.h>
martin@1579: #include <linux/pci.h>
martin@1579: #include <linux/init.h>
martin@1579: #include <linux/netdevice.h>
martin@1579: #include <linux/etherdevice.h>
martin@1579: #include <linux/rtnetlink.h>
martin@1579: #include <linux/delay.h>
martin@1579: #include <linux/ethtool.h>
martin@1579: #include <linux/mii.h>
martin@1579: #include <linux/completion.h>
martin@1579: #include <linux/crc32.h>
martin@1579: #include <linux/io.h>
martin@1579: #include <linux/uaccess.h>
martin@1579: #include <asm/irq.h>
martin@1579: 
martin@1579: #include "../globals.h"
martin@1579: #include "ecdev.h"
martin@1579: 
martin@1579: #define RTL8139_DRIVER_NAME DRV_NAME \
martin@1579:                             " EtherCAT-capable Fast Ethernet driver " \
martin@1579:                             DRV_VERSION ", master " EC_MASTER_VERSION
martin@1579: 
martin@1579: #define PFX DRV_NAME ": "
martin@1579: 
martin@1579: /* Default Message level */
martin@1579: #define RTL8139_DEF_MSG_ENABLE   (NETIF_MSG_DRV   | \
martin@1579:                                  NETIF_MSG_PROBE  | \
martin@1579:                                  NETIF_MSG_LINK)
martin@1579: 
martin@1579: 
martin@1579: /* define to 1, 2 or 3 to enable copious debugging info */
martin@1579: #define RTL8139_DEBUG 0
martin@1579: 
martin@1579: /* define to 1 to disable lightweight runtime debugging checks */
martin@1579: #undef RTL8139_NDEBUG
martin@1579: 
martin@1579: 
martin@1579: #ifdef RTL8139_NDEBUG
martin@1579: #  define assert(expr) do {} while (0)
martin@1579: #else
martin@1579: #  define assert(expr) \
martin@1579:         if(unlikely(!(expr))) {				        \
martin@1579:         pr_err("Assertion failed! %s,%s,%s,line=%d\n",	\
martin@1579: 	#expr, __FILE__, __func__, __LINE__);			\
martin@1579:         }
martin@1579: #endif
martin@1579: 
martin@1579: 
martin@1579: /* A few user-configurable values. */
martin@1579: /* media options */
martin@1579: #define MAX_UNITS 8
martin@1579: static int media[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
martin@1579: static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
martin@1579: 
martin@1579: /* Whether to use MMIO or PIO. Default to MMIO. */
martin@1579: #ifdef CONFIG_8139TOO_PIO
martin@1579: static int use_io = 1;
martin@1579: #else
martin@1579: static int use_io = 0;
martin@1579: #endif
martin@1579: 
martin@1579: /* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
martin@1579:    The RTL chips use a 64 element hash table based on the Ethernet CRC.  */
martin@1579: static int multicast_filter_limit = 32;
martin@1579: 
martin@1579: /* bitmapped message enable number */
martin@1579: static int debug = -1;
martin@1579: 
martin@1579: /*
martin@1579:  * Receive ring size
martin@1579:  * Warning: 64K ring has hardware issues and may lock up.
martin@1579:  */
martin@1579: #if defined(CONFIG_SH_DREAMCAST)
martin@1579: #define RX_BUF_IDX 0	/* 8K ring */
martin@1579: #else
martin@1579: #define RX_BUF_IDX	2	/* 32K ring */
martin@1579: #endif
martin@1579: #define RX_BUF_LEN	(8192 << RX_BUF_IDX)
martin@1579: #define RX_BUF_PAD	16
martin@1579: #define RX_BUF_WRAP_PAD 2048 /* spare padding to handle lack of packet wrap */
martin@1579: 
martin@1579: #if RX_BUF_LEN == 65536
martin@1579: #define RX_BUF_TOT_LEN	RX_BUF_LEN
martin@1579: #else
martin@1579: #define RX_BUF_TOT_LEN	(RX_BUF_LEN + RX_BUF_PAD + RX_BUF_WRAP_PAD)
martin@1579: #endif
martin@1579: 
martin@1579: /* Number of Tx descriptor registers. */
martin@1579: #define NUM_TX_DESC	4
martin@1579: 
martin@1579: /* max supported ethernet frame size -- must be at least (dev->mtu+14+4).*/
martin@1579: #define MAX_ETH_FRAME_SIZE	1536
martin@1579: 
martin@1579: /* Size of the Tx bounce buffers -- must be at least (dev->mtu+14+4). */
martin@1579: #define TX_BUF_SIZE	MAX_ETH_FRAME_SIZE
martin@1579: #define TX_BUF_TOT_LEN	(TX_BUF_SIZE * NUM_TX_DESC)
martin@1579: 
martin@1579: /* PCI Tuning Parameters
martin@1579:    Threshold is bytes transferred to chip before transmission starts. */
martin@1579: #define TX_FIFO_THRESH 256	/* In bytes, rounded down to 32 byte units. */
martin@1579: 
martin@1579: /* The following settings are log_2(bytes)-4:  0 == 16 bytes .. 6==1024, 7==end of packet. */
martin@1579: #define RX_FIFO_THRESH	7	/* Rx buffer level before first PCI xfer.  */
martin@1579: #define RX_DMA_BURST	7	/* Maximum PCI burst, '6' is 1024 */
martin@1579: #define TX_DMA_BURST	6	/* Maximum PCI burst, '6' is 1024 */
martin@1579: #define TX_RETRY	8	/* 0-15.  retries = 16 + (TX_RETRY * 16) */
martin@1579: 
martin@1579: /* Operational parameters that usually are not changed. */
martin@1579: /* Time in jiffies before concluding the transmitter is hung. */
martin@1579: #define TX_TIMEOUT  (6*HZ)
martin@1579: 
martin@1579: 
martin@1579: enum {
martin@1579: 	HAS_MII_XCVR = 0x010000,
martin@1579: 	HAS_CHIP_XCVR = 0x020000,
martin@1579: 	HAS_LNK_CHNG = 0x040000,
martin@1579: };
martin@1579: 
martin@1579: #define RTL_NUM_STATS 4		/* number of ETHTOOL_GSTATS u64's */
martin@1579: #define RTL_REGS_VER 1		/* version of reg. data in ETHTOOL_GREGS */
martin@1579: #define RTL_MIN_IO_SIZE 0x80
martin@1579: #define RTL8139B_IO_SIZE 256
martin@1579: 
martin@1579: #define RTL8129_CAPS	HAS_MII_XCVR
martin@1579: #define RTL8139_CAPS	(HAS_CHIP_XCVR|HAS_LNK_CHNG)
martin@1579: 
martin@1579: typedef enum {
martin@1579: 	RTL8139 = 0,
martin@1579: 	RTL8129,
martin@1579: } board_t;
martin@1579: 
martin@1579: 
martin@1579: /* indexed by board_t, above */
martin@1579: static const struct {
martin@1579: 	const char *name;
martin@1579: 	u32 hw_flags;
martin@1579: } board_info[] __devinitdata = {
martin@1579: 	{ "RealTek RTL8139", RTL8139_CAPS },
martin@1579: 	{ "RealTek RTL8129", RTL8129_CAPS },
martin@1579: };
martin@1579: 
martin@1579: 
martin@1579: static struct pci_device_id rtl8139_pci_tbl[] = {
martin@1579: 	{0x10ec, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
martin@1579: 	{0x10ec, 0x8138, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
martin@1579: 	{0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
martin@1579: 	{0x1500, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
martin@1579: 	{0x4033, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
martin@1579: 	{0x1186, 0x1300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
martin@1579: 	{0x1186, 0x1340, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
martin@1579: 	{0x13d1, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
martin@1579: 	{0x1259, 0xa117, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
martin@1579: 	{0x1259, 0xa11e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
martin@1579: 	{0x14ea, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
martin@1579: 	{0x14ea, 0xab07, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
martin@1579: 	{0x11db, 0x1234, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
martin@1579: 	{0x1432, 0x9130, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
martin@1579: 	{0x02ac, 0x1012, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
martin@1579: 	{0x018a, 0x0106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
martin@1579: 	{0x126c, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
martin@1579: 	{0x1743, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
martin@1579: 	{0x021b, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
martin@1579: 
martin@1579: #ifdef CONFIG_SH_SECUREEDGE5410
martin@1579: 	/* Bogus 8139 silicon reports 8129 without external PROM :-( */
martin@1579: 	{0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
martin@1579: #endif
martin@1579: #ifdef CONFIG_8139TOO_8129
martin@1579: 	{0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8129 },
martin@1579: #endif
martin@1579: 
martin@1579: 	/* some crazy cards report invalid vendor ids like
martin@1579: 	 * 0x0001 here.  The other ids are valid and constant,
martin@1579: 	 * so we simply don't match on the main vendor id.
martin@1579: 	 */
martin@1579: 	{PCI_ANY_ID, 0x8139, 0x10ec, 0x8139, 0, 0, RTL8139 },
martin@1579: 	{PCI_ANY_ID, 0x8139, 0x1186, 0x1300, 0, 0, RTL8139 },
martin@1579: 	{PCI_ANY_ID, 0x8139, 0x13d1, 0xab06, 0, 0, RTL8139 },
martin@1579: 
martin@1579: 	{0,}
martin@1579: };
martin@1579: 
martin@1579: /* prevent driver from being loaded automatically */
martin@1579: //MODULE_DEVICE_TABLE (pci, rtl8139_pci_tbl);
martin@1579: 
martin@1579: static struct {
martin@1579: 	const char str[ETH_GSTRING_LEN];
martin@1579: } ethtool_stats_keys[] = {
martin@1579: 	{ "early_rx" },
martin@1579: 	{ "tx_buf_mapped" },
martin@1579: 	{ "tx_timeouts" },
martin@1579: 	{ "rx_lost_in_ring" },
martin@1579: };
martin@1579: 
martin@1579: /* The rest of these values should never change. */
martin@1579: 
martin@1579: /* Symbolic offsets to registers. */
martin@1579: enum RTL8139_registers {
martin@1579: 	MAC0		= 0,	 /* Ethernet hardware address. */
martin@1579: 	MAR0		= 8,	 /* Multicast filter. */
martin@1579: 	TxStatus0	= 0x10,	 /* Transmit status (Four 32bit registers). */
martin@1579: 	TxAddr0		= 0x20,	 /* Tx descriptors (also four 32bit). */
martin@1579: 	RxBuf		= 0x30,
martin@1579: 	ChipCmd		= 0x37,
martin@1579: 	RxBufPtr	= 0x38,
martin@1579: 	RxBufAddr	= 0x3A,
martin@1579: 	IntrMask	= 0x3C,
martin@1579: 	IntrStatus	= 0x3E,
martin@1579: 	TxConfig	= 0x40,
martin@1579: 	RxConfig	= 0x44,
martin@1579: 	Timer		= 0x48,	 /* A general-purpose counter. */
martin@1579: 	RxMissed	= 0x4C,  /* 24 bits valid, write clears. */
martin@1579: 	Cfg9346		= 0x50,
martin@1579: 	Config0		= 0x51,
martin@1579: 	Config1		= 0x52,
martin@1579: 	TimerInt	= 0x54,
martin@1579: 	MediaStatus	= 0x58,
martin@1579: 	Config3		= 0x59,
martin@1579: 	Config4		= 0x5A,	 /* absent on RTL-8139A */
martin@1579: 	HltClk		= 0x5B,
martin@1579: 	MultiIntr	= 0x5C,
martin@1579: 	TxSummary	= 0x60,
martin@1579: 	BasicModeCtrl	= 0x62,
martin@1579: 	BasicModeStatus	= 0x64,
martin@1579: 	NWayAdvert	= 0x66,
martin@1579: 	NWayLPAR	= 0x68,
martin@1579: 	NWayExpansion	= 0x6A,
martin@1579: 	/* Undocumented registers, but required for proper operation. */
martin@1579: 	FIFOTMS		= 0x70,	 /* FIFO Control and test. */
martin@1579: 	CSCR		= 0x74,	 /* Chip Status and Configuration Register. */
martin@1579: 	PARA78		= 0x78,
martin@1579: 	FlashReg	= 0xD4,	/* Communication with Flash ROM, four bytes. */
martin@1579: 	PARA7c		= 0x7c,	 /* Magic transceiver parameter register. */
martin@1579: 	Config5		= 0xD8,	 /* absent on RTL-8139A */
martin@1579: };
martin@1579: 
martin@1579: enum ClearBitMasks {
martin@1579: 	MultiIntrClear	= 0xF000,
martin@1579: 	ChipCmdClear	= 0xE2,
martin@1579: 	Config1Clear	= (1<<7)|(1<<6)|(1<<3)|(1<<2)|(1<<1),
martin@1579: };
martin@1579: 
martin@1579: enum ChipCmdBits {
martin@1579: 	CmdReset	= 0x10,
martin@1579: 	CmdRxEnb	= 0x08,
martin@1579: 	CmdTxEnb	= 0x04,
martin@1579: 	RxBufEmpty	= 0x01,
martin@1579: };
martin@1579: 
martin@1579: /* Interrupt register bits, using my own meaningful names. */
martin@1579: enum IntrStatusBits {
martin@1579: 	PCIErr		= 0x8000,
martin@1579: 	PCSTimeout	= 0x4000,
martin@1579: 	RxFIFOOver	= 0x40,
martin@1579: 	RxUnderrun	= 0x20,
martin@1579: 	RxOverflow	= 0x10,
martin@1579: 	TxErr		= 0x08,
martin@1579: 	TxOK		= 0x04,
martin@1579: 	RxErr		= 0x02,
martin@1579: 	RxOK		= 0x01,
martin@1579: 
martin@1579: 	RxAckBits	= RxFIFOOver | RxOverflow | RxOK,
martin@1579: };
martin@1579: 
martin@1579: enum TxStatusBits {
martin@1579: 	TxHostOwns	= 0x2000,
martin@1579: 	TxUnderrun	= 0x4000,
martin@1579: 	TxStatOK	= 0x8000,
martin@1579: 	TxOutOfWindow	= 0x20000000,
martin@1579: 	TxAborted	= 0x40000000,
martin@1579: 	TxCarrierLost	= 0x80000000,
martin@1579: };
martin@1579: enum RxStatusBits {
martin@1579: 	RxMulticast	= 0x8000,
martin@1579: 	RxPhysical	= 0x4000,
martin@1579: 	RxBroadcast	= 0x2000,
martin@1579: 	RxBadSymbol	= 0x0020,
martin@1579: 	RxRunt		= 0x0010,
martin@1579: 	RxTooLong	= 0x0008,
martin@1579: 	RxCRCErr	= 0x0004,
martin@1579: 	RxBadAlign	= 0x0002,
martin@1579: 	RxStatusOK	= 0x0001,
martin@1579: };
martin@1579: 
martin@1579: /* Bits in RxConfig. */
martin@1579: enum rx_mode_bits {
martin@1579: 	AcceptErr	= 0x20,
martin@1579: 	AcceptRunt	= 0x10,
martin@1579: 	AcceptBroadcast	= 0x08,
martin@1579: 	AcceptMulticast	= 0x04,
martin@1579: 	AcceptMyPhys	= 0x02,
martin@1579: 	AcceptAllPhys	= 0x01,
martin@1579: };
martin@1579: 
martin@1579: /* Bits in TxConfig. */
martin@1579: enum tx_config_bits {
martin@1579:         /* Interframe Gap Time. Only TxIFG96 doesn't violate IEEE 802.3 */
martin@1579:         TxIFGShift	= 24,
martin@1579:         TxIFG84		= (0 << TxIFGShift), /* 8.4us / 840ns (10 / 100Mbps) */
martin@1579:         TxIFG88		= (1 << TxIFGShift), /* 8.8us / 880ns (10 / 100Mbps) */
martin@1579:         TxIFG92		= (2 << TxIFGShift), /* 9.2us / 920ns (10 / 100Mbps) */
martin@1579:         TxIFG96		= (3 << TxIFGShift), /* 9.6us / 960ns (10 / 100Mbps) */
martin@1579: 
martin@1579: 	TxLoopBack	= (1 << 18) | (1 << 17), /* enable loopback test mode */
martin@1579: 	TxCRC		= (1 << 16),	/* DISABLE Tx pkt CRC append */
martin@1579: 	TxClearAbt	= (1 << 0),	/* Clear abort (WO) */
martin@1579: 	TxDMAShift	= 8, /* DMA burst value (0-7) is shifted X many bits */
martin@1579: 	TxRetryShift	= 4, /* TXRR value (0-15) is shifted X many bits */
martin@1579: 
martin@1579: 	TxVersionMask	= 0x7C800000, /* mask out version bits 30-26, 23 */
martin@1579: };
martin@1579: 
martin@1579: /* Bits in Config1 */
martin@1579: enum Config1Bits {
martin@1579: 	Cfg1_PM_Enable	= 0x01,
martin@1579: 	Cfg1_VPD_Enable	= 0x02,
martin@1579: 	Cfg1_PIO	= 0x04,
martin@1579: 	Cfg1_MMIO	= 0x08,
martin@1579: 	LWAKE		= 0x10,		/* not on 8139, 8139A */
martin@1579: 	Cfg1_Driver_Load = 0x20,
martin@1579: 	Cfg1_LED0	= 0x40,
martin@1579: 	Cfg1_LED1	= 0x80,
martin@1579: 	SLEEP		= (1 << 1),	/* only on 8139, 8139A */
martin@1579: 	PWRDN		= (1 << 0),	/* only on 8139, 8139A */
martin@1579: };
martin@1579: 
martin@1579: /* Bits in Config3 */
martin@1579: enum Config3Bits {
martin@1579: 	Cfg3_FBtBEn   	= (1 << 0), /* 1	= Fast Back to Back */
martin@1579: 	Cfg3_FuncRegEn	= (1 << 1), /* 1	= enable CardBus Function registers */
martin@1579: 	Cfg3_CLKRUN_En	= (1 << 2), /* 1	= enable CLKRUN */
martin@1579: 	Cfg3_CardB_En 	= (1 << 3), /* 1	= enable CardBus registers */
martin@1579: 	Cfg3_LinkUp   	= (1 << 4), /* 1	= wake up on link up */
martin@1579: 	Cfg3_Magic    	= (1 << 5), /* 1	= wake up on Magic Packet (tm) */
martin@1579: 	Cfg3_PARM_En  	= (1 << 6), /* 0	= software can set twister parameters */
martin@1579: 	Cfg3_GNTSel   	= (1 << 7), /* 1	= delay 1 clock from PCI GNT signal */
martin@1579: };
martin@1579: 
martin@1579: /* Bits in Config4 */
martin@1579: enum Config4Bits {
martin@1579: 	LWPTN	= (1 << 2),	/* not on 8139, 8139A */
martin@1579: };
martin@1579: 
martin@1579: /* Bits in Config5 */
martin@1579: enum Config5Bits {
martin@1579: 	Cfg5_PME_STS   	= (1 << 0), /* 1	= PCI reset resets PME_Status */
martin@1579: 	Cfg5_LANWake   	= (1 << 1), /* 1	= enable LANWake signal */
martin@1579: 	Cfg5_LDPS      	= (1 << 2), /* 0	= save power when link is down */
martin@1579: 	Cfg5_FIFOAddrPtr= (1 << 3), /* Realtek internal SRAM testing */
martin@1579: 	Cfg5_UWF        = (1 << 4), /* 1 = accept unicast wakeup frame */
martin@1579: 	Cfg5_MWF        = (1 << 5), /* 1 = accept multicast wakeup frame */
martin@1579: 	Cfg5_BWF        = (1 << 6), /* 1 = accept broadcast wakeup frame */
martin@1579: };
martin@1579: 
martin@1579: enum RxConfigBits {
martin@1579: 	/* rx fifo threshold */
martin@1579: 	RxCfgFIFOShift	= 13,
martin@1579: 	RxCfgFIFONone	= (7 << RxCfgFIFOShift),
martin@1579: 
martin@1579: 	/* Max DMA burst */
martin@1579: 	RxCfgDMAShift	= 8,
martin@1579: 	RxCfgDMAUnlimited = (7 << RxCfgDMAShift),
martin@1579: 
martin@1579: 	/* rx ring buffer length */
martin@1579: 	RxCfgRcv8K	= 0,
martin@1579: 	RxCfgRcv16K	= (1 << 11),
martin@1579: 	RxCfgRcv32K	= (1 << 12),
martin@1579: 	RxCfgRcv64K	= (1 << 11) | (1 << 12),
martin@1579: 
martin@1579: 	/* Disable packet wrap at end of Rx buffer. (not possible with 64k) */
martin@1579: 	RxNoWrap	= (1 << 7),
martin@1579: };
martin@1579: 
martin@1579: /* Twister tuning parameters from RealTek.
martin@1579:    Completely undocumented, but required to tune bad links on some boards. */
martin@1579: enum CSCRBits {
martin@1579: 	CSCR_LinkOKBit		= 0x0400,
martin@1579: 	CSCR_LinkChangeBit	= 0x0800,
martin@1579: 	CSCR_LinkStatusBits	= 0x0f000,
martin@1579: 	CSCR_LinkDownOffCmd	= 0x003c0,
martin@1579: 	CSCR_LinkDownCmd	= 0x0f3c0,
martin@1579: };
martin@1579: 
martin@1579: enum Cfg9346Bits {
martin@1579: 	Cfg9346_Lock	= 0x00,
martin@1579: 	Cfg9346_Unlock	= 0xC0,
martin@1579: };
martin@1579: 
martin@1579: typedef enum {
martin@1579: 	CH_8139	= 0,
martin@1579: 	CH_8139_K,
martin@1579: 	CH_8139A,
martin@1579: 	CH_8139A_G,
martin@1579: 	CH_8139B,
martin@1579: 	CH_8130,
martin@1579: 	CH_8139C,
martin@1579: 	CH_8100,
martin@1579: 	CH_8100B_8139D,
martin@1579: 	CH_8101,
martin@1579: } chip_t;
martin@1579: 
martin@1579: enum chip_flags {
martin@1579: 	HasHltClk	= (1 << 0),
martin@1579: 	HasLWake	= (1 << 1),
martin@1579: };
martin@1579: 
martin@1579: #define HW_REVID(b30, b29, b28, b27, b26, b23, b22) \
martin@1579: 	(b30<<30 | b29<<29 | b28<<28 | b27<<27 | b26<<26 | b23<<23 | b22<<22)
martin@1579: #define HW_REVID_MASK	HW_REVID(1, 1, 1, 1, 1, 1, 1)
martin@1579: 
martin@1579: /* directly indexed by chip_t, above */
martin@1579: static const struct {
martin@1579: 	const char *name;
martin@1579: 	u32 version; /* from RTL8139C/RTL8139D docs */
martin@1579: 	u32 flags;
martin@1579: } rtl_chip_info[] = {
martin@1579: 	{ "RTL-8139",
martin@1579: 	  HW_REVID(1, 0, 0, 0, 0, 0, 0),
martin@1579: 	  HasHltClk,
martin@1579: 	},
martin@1579: 
martin@1579: 	{ "RTL-8139 rev K",
martin@1579: 	  HW_REVID(1, 1, 0, 0, 0, 0, 0),
martin@1579: 	  HasHltClk,
martin@1579: 	},
martin@1579: 
martin@1579: 	{ "RTL-8139A",
martin@1579: 	  HW_REVID(1, 1, 1, 0, 0, 0, 0),
martin@1579: 	  HasHltClk, /* XXX undocumented? */
martin@1579: 	},
martin@1579: 
martin@1579: 	{ "RTL-8139A rev G",
martin@1579: 	  HW_REVID(1, 1, 1, 0, 0, 1, 0),
martin@1579: 	  HasHltClk, /* XXX undocumented? */
martin@1579: 	},
martin@1579: 
martin@1579: 	{ "RTL-8139B",
martin@1579: 	  HW_REVID(1, 1, 1, 1, 0, 0, 0),
martin@1579: 	  HasLWake,
martin@1579: 	},
martin@1579: 
martin@1579: 	{ "RTL-8130",
martin@1579: 	  HW_REVID(1, 1, 1, 1, 1, 0, 0),
martin@1579: 	  HasLWake,
martin@1579: 	},
martin@1579: 
martin@1579: 	{ "RTL-8139C",
martin@1579: 	  HW_REVID(1, 1, 1, 0, 1, 0, 0),
martin@1579: 	  HasLWake,
martin@1579: 	},
martin@1579: 
martin@1579: 	{ "RTL-8100",
martin@1579: 	  HW_REVID(1, 1, 1, 1, 0, 1, 0),
martin@1579:  	  HasLWake,
martin@1579:  	},
martin@1579: 
martin@1579: 	{ "RTL-8100B/8139D",
martin@1579: 	  HW_REVID(1, 1, 1, 0, 1, 0, 1),
martin@1579: 	  HasHltClk /* XXX undocumented? */
martin@1579: 	| HasLWake,
martin@1579: 	},
martin@1579: 
martin@1579: 	{ "RTL-8101",
martin@1579: 	  HW_REVID(1, 1, 1, 0, 1, 1, 1),
martin@1579: 	  HasLWake,
martin@1579: 	},
martin@1579: };
martin@1579: 
martin@1579: struct rtl_extra_stats {
martin@1579: 	unsigned long early_rx;
martin@1579: 	unsigned long tx_buf_mapped;
martin@1579: 	unsigned long tx_timeouts;
martin@1579: 	unsigned long rx_lost_in_ring;
martin@1579: };
martin@1579: 
martin@1579: struct rtl8139_private {
martin@1579: 	void __iomem		*mmio_addr;
martin@1579: 	int			drv_flags;
martin@1579: 	struct pci_dev		*pci_dev;
martin@1579: 	u32			msg_enable;
martin@1579: 	struct napi_struct	napi;
martin@1579: 	struct net_device	*dev;
martin@1579: 
martin@1579: 	unsigned char		*rx_ring;
martin@1579: 	unsigned int		cur_rx;	/* RX buf index of next pkt */
martin@1579: 	dma_addr_t		rx_ring_dma;
martin@1579: 
martin@1579: 	unsigned int		tx_flag;
martin@1579: 	unsigned long		cur_tx;
martin@1579: 	unsigned long		dirty_tx;
martin@1579: 	unsigned char		*tx_buf[NUM_TX_DESC];	/* Tx bounce buffers */
martin@1579: 	unsigned char		*tx_bufs;	/* Tx bounce buffer region. */
martin@1579: 	dma_addr_t		tx_bufs_dma;
martin@1579: 
martin@1579: 	signed char		phys[4];	/* MII device addresses. */
martin@1579: 
martin@1579: 				/* Twister tune state. */
martin@1579: 	char			twistie, twist_row, twist_col;
martin@1579: 
martin@1579: 	unsigned int		watchdog_fired : 1;
martin@1579: 	unsigned int		default_port : 4; /* Last dev->if_port value. */
martin@1579: 	unsigned int		have_thread : 1;
martin@1579: 
martin@1579: 	spinlock_t		lock;
martin@1579: 	spinlock_t		rx_lock;
martin@1579: 
martin@1579: 	chip_t			chipset;
martin@1579: 	u32			rx_config;
martin@1579: 	struct rtl_extra_stats	xstats;
martin@1579: 
martin@1579: 	struct delayed_work	thread;
martin@1579: 
martin@1579: 	struct mii_if_info	mii;
martin@1579: 	unsigned int		regs_len;
martin@1579: 	unsigned long		fifo_copy_timeout;
fp@2421: 
martin@1579: 	ec_device_t *ecdev;
martin@1579: };
martin@1579: 
martin@1579: MODULE_AUTHOR("Florian Pose <fp@igh-essen.com>");
martin@1579: MODULE_DESCRIPTION("RealTek RTL-8139 EtherCAT driver");
martin@1579: MODULE_LICENSE("GPL");
martin@1579: MODULE_VERSION(EC_MASTER_VERSION);
martin@1579: 
martin@1579: module_param(use_io, int, 0);
martin@1579: MODULE_PARM_DESC(use_io, "Force use of I/O access mode. 0=MMIO 1=PIO");
martin@1579: module_param(multicast_filter_limit, int, 0);
martin@1579: module_param_array(media, int, NULL, 0);
martin@1579: module_param_array(full_duplex, int, NULL, 0);
martin@1579: module_param(debug, int, 0);
martin@1579: MODULE_PARM_DESC (debug, "8139too bitmapped message enable number");
martin@1579: MODULE_PARM_DESC (multicast_filter_limit, "8139too maximum number of filtered multicast addresses");
martin@1579: MODULE_PARM_DESC (media, "8139too: Bits 4+9: force full duplex, bit 5: 100Mbps");
martin@1579: MODULE_PARM_DESC (full_duplex, "8139too: Force full duplex for board(s) (1)");
martin@1579: 
martin@1579: void ec_poll(struct net_device *);
martin@1579: 
martin@1579: static int read_eeprom (void __iomem *ioaddr, int location, int addr_len);
martin@1579: static int rtl8139_open (struct net_device *dev);
martin@1579: static int mdio_read (struct net_device *dev, int phy_id, int location);
martin@1579: static void mdio_write (struct net_device *dev, int phy_id, int location,
martin@1579: 			int val);
martin@1579: static void rtl8139_start_thread(struct rtl8139_private *tp);
martin@1579: static void rtl8139_tx_timeout (struct net_device *dev);
martin@1579: static void rtl8139_init_ring (struct net_device *dev);
martin@1579: static int rtl8139_start_xmit (struct sk_buff *skb,
martin@1579: 			       struct net_device *dev);
martin@1579: #ifdef CONFIG_NET_POLL_CONTROLLER
martin@1579: static void rtl8139_poll_controller(struct net_device *dev);
martin@1579: #endif
martin@1579: static int rtl8139_set_mac_address(struct net_device *dev, void *p);
martin@1579: static int rtl8139_poll(struct napi_struct *napi, int budget);
martin@1579: static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance);
martin@1579: static int rtl8139_close (struct net_device *dev);
martin@1579: static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd);
martin@1579: static struct net_device_stats *rtl8139_get_stats (struct net_device *dev);
martin@1579: static void rtl8139_set_rx_mode (struct net_device *dev);
martin@1579: static void __set_rx_mode (struct net_device *dev);
martin@1579: static void rtl8139_hw_start (struct net_device *dev);
martin@1579: static void rtl8139_thread (struct work_struct *work);
martin@1579: static void rtl8139_tx_timeout_task(struct work_struct *work);
martin@1579: static const struct ethtool_ops rtl8139_ethtool_ops;
martin@1579: 
martin@1579: /* write MMIO register, with flush */
martin@1579: /* Flush avoids rtl8139 bug w/ posted MMIO writes */
martin@1579: #define RTL_W8_F(reg, val8)	do { iowrite8 ((val8), ioaddr + (reg)); ioread8 (ioaddr + (reg)); } while (0)
martin@1579: #define RTL_W16_F(reg, val16)	do { iowrite16 ((val16), ioaddr + (reg)); ioread16 (ioaddr + (reg)); } while (0)
martin@1579: #define RTL_W32_F(reg, val32)	do { iowrite32 ((val32), ioaddr + (reg)); ioread32 (ioaddr + (reg)); } while (0)
martin@1579: 
martin@1579: /* write MMIO register */
martin@1579: #define RTL_W8(reg, val8)	iowrite8 ((val8), ioaddr + (reg))
martin@1579: #define RTL_W16(reg, val16)	iowrite16 ((val16), ioaddr + (reg))
martin@1579: #define RTL_W32(reg, val32)	iowrite32 ((val32), ioaddr + (reg))
martin@1579: 
martin@1579: /* read MMIO register */
martin@1579: #define RTL_R8(reg)		ioread8 (ioaddr + (reg))
martin@1579: #define RTL_R16(reg)		ioread16 (ioaddr + (reg))
martin@1579: #define RTL_R32(reg)		((unsigned long) ioread32 (ioaddr + (reg)))
martin@1579: 
martin@1579: 
martin@1579: static const u16 rtl8139_intr_mask =
martin@1579: 	PCIErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver |
martin@1579: 	TxErr | TxOK | RxErr | RxOK;
martin@1579: 
martin@1579: static const u16 rtl8139_norx_intr_mask =
martin@1579: 	PCIErr | PCSTimeout | RxUnderrun |
martin@1579: 	TxErr | TxOK | RxErr ;
martin@1579: 
martin@1579: #if RX_BUF_IDX == 0
martin@1579: static const unsigned int rtl8139_rx_config =
martin@1579: 	RxCfgRcv8K | RxNoWrap |
martin@1579: 	(RX_FIFO_THRESH << RxCfgFIFOShift) |
martin@1579: 	(RX_DMA_BURST << RxCfgDMAShift);
martin@1579: #elif RX_BUF_IDX == 1
martin@1579: static const unsigned int rtl8139_rx_config =
martin@1579: 	RxCfgRcv16K | RxNoWrap |
martin@1579: 	(RX_FIFO_THRESH << RxCfgFIFOShift) |
martin@1579: 	(RX_DMA_BURST << RxCfgDMAShift);
martin@1579: #elif RX_BUF_IDX == 2
martin@1579: static const unsigned int rtl8139_rx_config =
martin@1579: 	RxCfgRcv32K | RxNoWrap |
martin@1579: 	(RX_FIFO_THRESH << RxCfgFIFOShift) |
martin@1579: 	(RX_DMA_BURST << RxCfgDMAShift);
martin@1579: #elif RX_BUF_IDX == 3
martin@1579: static const unsigned int rtl8139_rx_config =
martin@1579: 	RxCfgRcv64K |
martin@1579: 	(RX_FIFO_THRESH << RxCfgFIFOShift) |
martin@1579: 	(RX_DMA_BURST << RxCfgDMAShift);
martin@1579: #else
martin@1579: #error "Invalid configuration for 8139_RXBUF_IDX"
martin@1579: #endif
martin@1579: 
martin@1579: static const unsigned int rtl8139_tx_config =
martin@1579: 	TxIFG96 | (TX_DMA_BURST << TxDMAShift) | (TX_RETRY << TxRetryShift);
martin@1579: 
martin@1579: static void __rtl8139_cleanup_dev (struct net_device *dev)
martin@1579: {
martin@1579: 	struct rtl8139_private *tp = netdev_priv(dev);
martin@1579: 	struct pci_dev *pdev;
martin@1579: 
martin@1579: 	assert (dev != NULL);
martin@1579: 	assert (tp->pci_dev != NULL);
martin@1579: 	pdev = tp->pci_dev;
martin@1579: 
martin@1579: 	if (tp->mmio_addr)
martin@1579: 		pci_iounmap (pdev, tp->mmio_addr);
martin@1579: 
martin@1579: 	/* it's ok to call this even if we have no regions to free */
martin@1579: 	pci_release_regions (pdev);
martin@1579: 
martin@1579: 	free_netdev(dev);
martin@1579: 	pci_set_drvdata (pdev, NULL);
martin@1579: }
martin@1579: 
martin@1579: 
martin@1579: static void rtl8139_chip_reset (void __iomem *ioaddr)
martin@1579: {
martin@1579: 	int i;
martin@1579: 
martin@1579: 	/* Soft reset the chip. */
martin@1579: 	RTL_W8 (ChipCmd, CmdReset);
martin@1579: 
martin@1579: 	/* Check that the chip has finished the reset. */
martin@1579: 	for (i = 1000; i > 0; i--) {
martin@1579: 		barrier();
martin@1579: 		if ((RTL_R8 (ChipCmd) & CmdReset) == 0)
martin@1579: 			break;
martin@1579: 		udelay (10);
martin@1579: 	}
martin@1579: }
martin@1579: 
martin@1579: 
martin@1579: static __devinit struct net_device * rtl8139_init_board (struct pci_dev *pdev)
martin@1579: {
martin@1579: 	void __iomem *ioaddr;
martin@1579: 	struct net_device *dev;
martin@1579: 	struct rtl8139_private *tp;
martin@1579: 	u8 tmp8;
martin@1579: 	int rc, disable_dev_on_err = 0;
martin@1579: 	unsigned int i;
martin@1579: 	unsigned long pio_start, pio_end, pio_flags, pio_len;
martin@1579: 	unsigned long mmio_start, mmio_end, mmio_flags, mmio_len;
martin@1579: 	u32 version;
martin@1579: 
martin@1579: 	assert (pdev != NULL);
martin@1579: 
martin@1579: 	/* dev and priv zeroed in alloc_etherdev */
martin@1579: 	dev = alloc_etherdev (sizeof (*tp));
martin@1579: 	if (dev == NULL) {
martin@1579: 		dev_err(&pdev->dev, "Unable to alloc new net device\n");
martin@1579: 		return ERR_PTR(-ENOMEM);
martin@1579: 	}
martin@1579: 	SET_NETDEV_DEV(dev, &pdev->dev);
martin@1579: 
martin@1579: 	tp = netdev_priv(dev);
martin@1579: 	tp->pci_dev = pdev;
martin@1579: 
martin@1579: 	/* enable device (incl. PCI PM wakeup and hotplug setup) */
martin@1579: 	rc = pci_enable_device (pdev);
martin@1579: 	if (rc)
martin@1579: 		goto err_out;
martin@1579: 
martin@1579: 	pio_start = pci_resource_start (pdev, 0);
martin@1579: 	pio_end = pci_resource_end (pdev, 0);
martin@1579: 	pio_flags = pci_resource_flags (pdev, 0);
martin@1579: 	pio_len = pci_resource_len (pdev, 0);
martin@1579: 
martin@1579: 	mmio_start = pci_resource_start (pdev, 1);
martin@1579: 	mmio_end = pci_resource_end (pdev, 1);
martin@1579: 	mmio_flags = pci_resource_flags (pdev, 1);
martin@1579: 	mmio_len = pci_resource_len (pdev, 1);
martin@1579: 
martin@1579: 	/* set this immediately, we need to know before
martin@1579: 	 * we talk to the chip directly */
martin@1579: 	pr_debug("PIO region size == 0x%02lX\n", pio_len);
martin@1579: 	pr_debug("MMIO region size == 0x%02lX\n", mmio_len);
martin@1579: 
martin@1579: retry:
martin@1579: 	if (use_io) {
martin@1579: 		/* make sure PCI base addr 0 is PIO */
martin@1579: 		if (!(pio_flags & IORESOURCE_IO)) {
martin@1579: 			dev_err(&pdev->dev, "region #0 not a PIO resource, aborting\n");
martin@1579: 			rc = -ENODEV;
martin@1579: 			goto err_out;
martin@1579: 		}
martin@1579: 		/* check for weird/broken PCI region reporting */
martin@1579: 		if (pio_len < RTL_MIN_IO_SIZE) {
martin@1579: 			dev_err(&pdev->dev, "Invalid PCI I/O region size(s), aborting\n");
martin@1579: 			rc = -ENODEV;
martin@1579: 			goto err_out;
martin@1579: 		}
martin@1579: 	} else {
martin@1579: 		/* make sure PCI base addr 1 is MMIO */
martin@1579: 		if (!(mmio_flags & IORESOURCE_MEM)) {
martin@1579: 			dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n");
martin@1579: 			rc = -ENODEV;
martin@1579: 			goto err_out;
martin@1579: 		}
martin@1579: 		if (mmio_len < RTL_MIN_IO_SIZE) {
martin@1579: 			dev_err(&pdev->dev, "Invalid PCI mem region size(s), aborting\n");
martin@1579: 			rc = -ENODEV;
martin@1579: 			goto err_out;
martin@1579: 		}
martin@1579: 	}
martin@1579: 
martin@1579: 	rc = pci_request_regions (pdev, DRV_NAME);
martin@1579: 	if (rc)
martin@1579: 		goto err_out;
martin@1579: 	disable_dev_on_err = 1;
martin@1579: 
martin@1579: 	/* enable PCI bus-mastering */
martin@1579: 	pci_set_master (pdev);
martin@1579: 
martin@1579: 	if (use_io) {
martin@1579: 		ioaddr = pci_iomap(pdev, 0, 0);
martin@1579: 		if (!ioaddr) {
martin@1579: 			dev_err(&pdev->dev, "cannot map PIO, aborting\n");
martin@1579: 			rc = -EIO;
martin@1579: 			goto err_out;
martin@1579: 		}
martin@1579: 		dev->base_addr = pio_start;
martin@1579: 		tp->regs_len = pio_len;
martin@1579: 	} else {
martin@1579: 		/* ioremap MMIO region */
martin@1579: 		ioaddr = pci_iomap(pdev, 1, 0);
martin@1579: 		if (ioaddr == NULL) {
martin@1579: 			dev_err(&pdev->dev, "cannot remap MMIO, trying PIO\n");
martin@1579: 			pci_release_regions(pdev);
martin@1579: 			use_io = 1;
martin@1579: 			goto retry;
martin@1579: 		}
martin@1579: 		dev->base_addr = (long) ioaddr;
martin@1579: 		tp->regs_len = mmio_len;
martin@1579: 	}
martin@1579: 	tp->mmio_addr = ioaddr;
martin@1579: 
martin@1579: 	/* Bring old chips out of low-power mode. */
martin@1579: 	RTL_W8 (HltClk, 'R');
martin@1579: 
martin@1579: 	/* check for missing/broken hardware */
martin@1579: 	if (RTL_R32 (TxConfig) == 0xFFFFFFFF) {
martin@1579: 		dev_err(&pdev->dev, "Chip not responding, ignoring board\n");
martin@1579: 		rc = -EIO;
martin@1579: 		goto err_out;
martin@1579: 	}
martin@1579: 
martin@1579: 	/* identify chip attached to board */
martin@1579: 	version = RTL_R32 (TxConfig) & HW_REVID_MASK;
martin@1579: 	for (i = 0; i < ARRAY_SIZE (rtl_chip_info); i++)
martin@1579: 		if (version == rtl_chip_info[i].version) {
martin@1579: 			tp->chipset = i;
martin@1579: 			goto match;
martin@1579: 		}
martin@1579: 
martin@1579: 	/* if unknown chip, assume array element #0, original RTL-8139 in this case */
martin@1579: 	dev_dbg(&pdev->dev, "unknown chip version, assuming RTL-8139\n");
martin@1579: 	dev_dbg(&pdev->dev, "TxConfig = 0x%lx\n", RTL_R32 (TxConfig));
martin@1579: 	tp->chipset = 0;
martin@1579: 
martin@1579: match:
martin@1579: 	pr_debug("chipset id (%d) == index %d, '%s'\n",
martin@1579: 		 version, i, rtl_chip_info[i].name);
martin@1579: 
martin@1579: 	if (tp->chipset >= CH_8139B) {
martin@1579: 		u8 new_tmp8 = tmp8 = RTL_R8 (Config1);
martin@1579: 		pr_debug("PCI PM wakeup\n");
martin@1579: 		if ((rtl_chip_info[tp->chipset].flags & HasLWake) &&
martin@1579: 		    (tmp8 & LWAKE))
martin@1579: 			new_tmp8 &= ~LWAKE;
martin@1579: 		new_tmp8 |= Cfg1_PM_Enable;
martin@1579: 		if (new_tmp8 != tmp8) {
martin@1579: 			RTL_W8 (Cfg9346, Cfg9346_Unlock);
martin@1579: 			RTL_W8 (Config1, tmp8);
martin@1579: 			RTL_W8 (Cfg9346, Cfg9346_Lock);
martin@1579: 		}
martin@1579: 		if (rtl_chip_info[tp->chipset].flags & HasLWake) {
martin@1579: 			tmp8 = RTL_R8 (Config4);
martin@1579: 			if (tmp8 & LWPTN) {
martin@1579: 				RTL_W8 (Cfg9346, Cfg9346_Unlock);
martin@1579: 				RTL_W8 (Config4, tmp8 & ~LWPTN);
martin@1579: 				RTL_W8 (Cfg9346, Cfg9346_Lock);
martin@1579: 			}
martin@1579: 		}
martin@1579: 	} else {
martin@1579: 		pr_debug("Old chip wakeup\n");
martin@1579: 		tmp8 = RTL_R8 (Config1);
martin@1579: 		tmp8 &= ~(SLEEP | PWRDN);
martin@1579: 		RTL_W8 (Config1, tmp8);
martin@1579: 	}
martin@1579: 
martin@1579: 	rtl8139_chip_reset (ioaddr);
martin@1579: 
martin@1579: 	return dev;
martin@1579: 
martin@1579: err_out:
martin@1579: 	__rtl8139_cleanup_dev (dev);
martin@1579: 	if (disable_dev_on_err)
martin@1579: 		pci_disable_device (pdev);
martin@1579: 	return ERR_PTR(rc);
martin@1579: }
martin@1579: 
martin@1579: static const struct net_device_ops rtl8139_netdev_ops = {
martin@1579: 	.ndo_open		= rtl8139_open,
martin@1579: 	.ndo_stop		= rtl8139_close,
martin@1579: 	.ndo_get_stats		= rtl8139_get_stats,
martin@1579: 	.ndo_change_mtu		= eth_change_mtu,
martin@1579: 	.ndo_validate_addr	= eth_validate_addr,
martin@1579: 	.ndo_set_mac_address 	= rtl8139_set_mac_address,
martin@1579: 	.ndo_start_xmit		= rtl8139_start_xmit,
martin@1579: 	.ndo_set_multicast_list	= rtl8139_set_rx_mode,
martin@1579: 	.ndo_do_ioctl		= netdev_ioctl,
martin@1579: 	.ndo_tx_timeout		= rtl8139_tx_timeout,
martin@1579: #ifdef CONFIG_NET_POLL_CONTROLLER
martin@1579: 	.ndo_poll_controller	= rtl8139_poll_controller,
martin@1579: #endif
martin@1579: };
martin@1579: 
martin@1579: static int __devinit rtl8139_init_one (struct pci_dev *pdev,
martin@1579: 				       const struct pci_device_id *ent)
martin@1579: {
martin@1579: 	struct net_device *dev = NULL;
martin@1579: 	struct rtl8139_private *tp;
martin@1579: 	int i, addr_len, option;
martin@1579: 	void __iomem *ioaddr;
martin@1579: 	static int board_idx = -1;
martin@1579: 
martin@1579: 	assert (pdev != NULL);
martin@1579: 	assert (ent != NULL);
martin@1579: 
martin@1579: 	board_idx++;
martin@1579: 
martin@1579: 	/* when we're built into the kernel, the driver version message
martin@1579: 	 * is only printed if at least one 8139 board has been found
martin@1579: 	 */
martin@1579: #ifndef MODULE
martin@1579: 	{
martin@1579: 		static int printed_version;
martin@1579: 		if (!printed_version++)
martin@1579: 			pr_info(RTL8139_DRIVER_NAME "\n");
martin@1579: 	}
martin@1579: #endif
martin@1579: 
martin@1579: 	if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
martin@1579: 	    pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pdev->revision >= 0x20) {
martin@1579: 		dev_info(&pdev->dev,
martin@1579: 			   "This (id %04x:%04x rev %02x) is an enhanced 8139C+ chip, use 8139cp\n",
martin@1579: 		       	   pdev->vendor, pdev->device, pdev->revision);
martin@1579: 		return -ENODEV;
martin@1579: 	}
martin@1579: 
martin@1579: 	if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
martin@1579: 	    pdev->device == PCI_DEVICE_ID_REALTEK_8139 &&
martin@1579: 	    pdev->subsystem_vendor == PCI_VENDOR_ID_ATHEROS &&
martin@1579: 	    pdev->subsystem_device == PCI_DEVICE_ID_REALTEK_8139) {
martin@1579: 		pr_info("8139too: OQO Model 2 detected. Forcing PIO\n");
martin@1579: 		use_io = 1;
martin@1579: 	}
martin@1579: 
martin@1579: 	dev = rtl8139_init_board (pdev);
martin@1579: 	if (IS_ERR(dev))
martin@1579: 		return PTR_ERR(dev);
martin@1579: 
martin@1579: 	assert (dev != NULL);
martin@1579: 	tp = netdev_priv(dev);
martin@1579: 	tp->dev = dev;
martin@1579: 
martin@1579: 	ioaddr = tp->mmio_addr;
martin@1579: 	assert (ioaddr != NULL);
martin@1579: 
martin@1579: 	addr_len = read_eeprom (ioaddr, 0, 8) == 0x8129 ? 8 : 6;
martin@1579: 	for (i = 0; i < 3; i++)
martin@1579: 		((__le16 *) (dev->dev_addr))[i] =
martin@1579: 		    cpu_to_le16(read_eeprom (ioaddr, i + 7, addr_len));
martin@1579: 	memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
martin@1579: 
martin@1579: 	/* The Rtl8139-specific entries in the device structure. */
martin@1579: 	dev->netdev_ops = &rtl8139_netdev_ops;
martin@1579: 	dev->ethtool_ops = &rtl8139_ethtool_ops;
martin@1579: 	dev->watchdog_timeo = TX_TIMEOUT;
martin@1579: 	netif_napi_add(dev, &tp->napi, rtl8139_poll, 64);
martin@1579: 
martin@1579: 	/* note: the hardware is not capable of sg/csum/highdma, however
martin@1579: 	 * through the use of skb_copy_and_csum_dev we enable these
martin@1579: 	 * features
martin@1579: 	 */
martin@1579: 	dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA;
martin@1579: 
martin@1579: 	dev->irq = pdev->irq;
martin@1579: 
martin@1579: 	/* tp zeroed and aligned in alloc_etherdev */
martin@1579: 	tp = netdev_priv(dev);
martin@1579: 
martin@1579: 	/* note: tp->chipset set in rtl8139_init_board */
martin@1579: 	tp->drv_flags = board_info[ent->driver_data].hw_flags;
martin@1579: 	tp->mmio_addr = ioaddr;
martin@1579: 	tp->msg_enable =
martin@1579: 		(debug < 0 ? RTL8139_DEF_MSG_ENABLE : ((1 << debug) - 1));
martin@1579: 	spin_lock_init (&tp->lock);
martin@1579: 	spin_lock_init (&tp->rx_lock);
martin@1579: 	INIT_DELAYED_WORK(&tp->thread, rtl8139_thread);
martin@1579: 	tp->mii.dev = dev;
martin@1579: 	tp->mii.mdio_read = mdio_read;
martin@1579: 	tp->mii.mdio_write = mdio_write;
martin@1579: 	tp->mii.phy_id_mask = 0x3f;
martin@1579: 	tp->mii.reg_num_mask = 0x1f;
martin@1579: 
martin@1579: 	/* dev is fully set up and ready to use now */
martin@1579: 	// offer device to EtherCAT master module
martin@1579: 	tp->ecdev = ecdev_offer(dev, ec_poll, THIS_MODULE);
martin@1579: 
martin@1579: 	if (!tp->ecdev) {
martin@1579: 		pr_debug("about to register device named %s (%p)...\n", dev->name, dev);
martin@1579: 		i = register_netdev (dev);
martin@1579: 		if (i) goto err_out;
martin@1579: 	}
martin@1579: 
martin@1579: 	pci_set_drvdata (pdev, dev);
martin@1579: 
martin@1579: 	pr_info("%s: %s at 0x%lx, %pM, IRQ %d\n",
martin@1579: 		dev->name,
martin@1579: 		board_info[ent->driver_data].name,
martin@1579: 		dev->base_addr,
martin@1579: 		dev->dev_addr,
martin@1579: 		dev->irq);
martin@1579: 
martin@1579: 	pr_debug("%s:  Identified 8139 chip type '%s'\n",
martin@1579: 		dev->name, rtl_chip_info[tp->chipset].name);
martin@1579: 
martin@1579: 	/* Find the connected MII xcvrs.
martin@1579: 	   Doing this in open() would allow detecting external xcvrs later, but
martin@1579: 	   takes too much time. */
martin@1579: #ifdef CONFIG_8139TOO_8129
martin@1579: 	if (tp->drv_flags & HAS_MII_XCVR) {
martin@1579: 		int phy, phy_idx = 0;
martin@1579: 		for (phy = 0; phy < 32 && phy_idx < sizeof(tp->phys); phy++) {
martin@1579: 			int mii_status = mdio_read(dev, phy, 1);
martin@1579: 			if (mii_status != 0xffff  &&  mii_status != 0x0000) {
martin@1579: 				u16 advertising = mdio_read(dev, phy, 4);
martin@1579: 				tp->phys[phy_idx++] = phy;
martin@1579: 				pr_info("%s: MII transceiver %d status 0x%4.4x advertising %4.4x.\n",
martin@1579: 					   dev->name, phy, mii_status, advertising);
martin@1579: 			}
martin@1579: 		}
martin@1579: 		if (phy_idx == 0) {
martin@1579: 			pr_info("%s: No MII transceivers found! Assuming SYM transceiver.\n",
martin@1579: 				   dev->name);
martin@1579: 			tp->phys[0] = 32;
martin@1579: 		}
martin@1579: 	} else
martin@1579: #endif
martin@1579: 		tp->phys[0] = 32;
martin@1579: 	tp->mii.phy_id = tp->phys[0];
martin@1579: 
martin@1579: 	/* The lower four bits are the media type. */
martin@1579: 	option = (board_idx >= MAX_UNITS) ? 0 : media[board_idx];
martin@1579: 	if (option > 0) {
martin@1579: 		tp->mii.full_duplex = (option & 0x210) ? 1 : 0;
martin@1579: 		tp->default_port = option & 0xFF;
martin@1579: 		if (tp->default_port)
martin@1579: 			tp->mii.force_media = 1;
martin@1579: 	}
martin@1579: 	if (board_idx < MAX_UNITS  &&  full_duplex[board_idx] > 0)
martin@1579: 		tp->mii.full_duplex = full_duplex[board_idx];
martin@1579: 	if (tp->mii.full_duplex) {
martin@1579: 		pr_info("%s: Media type forced to Full Duplex.\n", dev->name);
martin@1579: 		/* Changing the MII-advertised media because might prevent
martin@1579: 		   re-connection. */
martin@1579: 		tp->mii.force_media = 1;
martin@1579: 	}
martin@1579: 	if (tp->default_port) {
martin@1579: 		pr_info("  Forcing %dMbps %s-duplex operation.\n",
martin@1579: 			   (option & 0x20 ? 100 : 10),
martin@1579: 			   (option & 0x10 ? "full" : "half"));
martin@1579: 		mdio_write(dev, tp->phys[0], 0,
martin@1579: 				   ((option & 0x20) ? 0x2000 : 0) | 	/* 100Mbps? */
martin@1579: 				   ((option & 0x10) ? 0x0100 : 0)); /* Full duplex? */
martin@1579: 	}
martin@1579: 
martin@1579: 	/* Put the chip into low-power mode. */
martin@1579: 	if (rtl_chip_info[tp->chipset].flags & HasHltClk)
martin@1579: 		RTL_W8 (HltClk, 'H');	/* 'R' would leave the clock running. */
martin@1579: 
fp@2582: 	if (tp->ecdev) {
fp@2582: 		i = ecdev_open(tp->ecdev);
fp@2582: 		if (i) {
fp@2582: 			ecdev_withdraw(tp->ecdev);
fp@2582: 			goto err_out;
fp@2582: 		}
martin@1579: 	}
martin@1579: 
martin@1579: 	return 0;
martin@1579: 
martin@1579: err_out:
martin@1579: 	__rtl8139_cleanup_dev (dev);
martin@1579: 	pci_disable_device (pdev);
martin@1579: 	return i;
martin@1579: }
martin@1579: 
martin@1579: 
martin@1579: static void __devexit rtl8139_remove_one (struct pci_dev *pdev)
martin@1579: {
martin@1579: 	struct net_device *dev = pci_get_drvdata (pdev);
martin@1579: 	struct rtl8139_private *tp = netdev_priv(dev);
martin@1579: 
martin@1579: 	assert (dev != NULL);
martin@1579: 
martin@1579: 	flush_scheduled_work();
martin@1579: 
martin@1579: 	if (tp->ecdev) {
martin@1579: 		ecdev_close(tp->ecdev);
martin@1579: 		ecdev_withdraw(tp->ecdev);
martin@1579: 	}
martin@1579: 	else {
martin@1579: 		unregister_netdev (dev);
martin@1579: 	}
martin@1579: 
martin@1579: 	__rtl8139_cleanup_dev (dev);
martin@1579: 	pci_disable_device (pdev);
martin@1579: }
martin@1579: 
martin@1579: 
martin@1579: /* Serial EEPROM section. */
martin@1579: 
martin@1579: /*  EEPROM_Ctrl bits. */
martin@1579: #define EE_SHIFT_CLK	0x04	/* EEPROM shift clock. */
martin@1579: #define EE_CS			0x08	/* EEPROM chip select. */
martin@1579: #define EE_DATA_WRITE	0x02	/* EEPROM chip data in. */
martin@1579: #define EE_WRITE_0		0x00
martin@1579: #define EE_WRITE_1		0x02
martin@1579: #define EE_DATA_READ	0x01	/* EEPROM chip data out. */
martin@1579: #define EE_ENB			(0x80 | EE_CS)
martin@1579: 
martin@1579: /* Delay between EEPROM clock transitions.
martin@1579:    No extra delay is needed with 33Mhz PCI, but 66Mhz may change this.
martin@1579:  */
martin@1579: 
martin@1579: #define eeprom_delay()	(void)RTL_R32(Cfg9346)
martin@1579: 
martin@1579: /* The EEPROM commands include the alway-set leading bit. */
martin@1579: #define EE_WRITE_CMD	(5)
martin@1579: #define EE_READ_CMD		(6)
martin@1579: #define EE_ERASE_CMD	(7)
martin@1579: 
martin@1579: static int __devinit read_eeprom (void __iomem *ioaddr, int location, int addr_len)
martin@1579: {
martin@1579: 	int i;
martin@1579: 	unsigned retval = 0;
martin@1579: 	int read_cmd = location | (EE_READ_CMD << addr_len);
martin@1579: 
martin@1579: 	RTL_W8 (Cfg9346, EE_ENB & ~EE_CS);
martin@1579: 	RTL_W8 (Cfg9346, EE_ENB);
martin@1579: 	eeprom_delay ();
martin@1579: 
martin@1579: 	/* Shift the read command bits out. */
martin@1579: 	for (i = 4 + addr_len; i >= 0; i--) {
martin@1579: 		int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
martin@1579: 		RTL_W8 (Cfg9346, EE_ENB | dataval);
martin@1579: 		eeprom_delay ();
martin@1579: 		RTL_W8 (Cfg9346, EE_ENB | dataval | EE_SHIFT_CLK);
martin@1579: 		eeprom_delay ();
martin@1579: 	}
martin@1579: 	RTL_W8 (Cfg9346, EE_ENB);
martin@1579: 	eeprom_delay ();
martin@1579: 
martin@1579: 	for (i = 16; i > 0; i--) {
martin@1579: 		RTL_W8 (Cfg9346, EE_ENB | EE_SHIFT_CLK);
martin@1579: 		eeprom_delay ();
martin@1579: 		retval =
martin@1579: 		    (retval << 1) | ((RTL_R8 (Cfg9346) & EE_DATA_READ) ? 1 :
martin@1579: 				     0);
martin@1579: 		RTL_W8 (Cfg9346, EE_ENB);
martin@1579: 		eeprom_delay ();
martin@1579: 	}
martin@1579: 
martin@1579: 	/* Terminate the EEPROM access. */
martin@1579: 	RTL_W8 (Cfg9346, ~EE_CS);
martin@1579: 	eeprom_delay ();
martin@1579: 
martin@1579: 	return retval;
martin@1579: }
martin@1579: 
martin@1579: /* MII serial management: mostly bogus for now. */
martin@1579: /* Read and write the MII management registers using software-generated
martin@1579:    serial MDIO protocol.
martin@1579:    The maximum data clock rate is 2.5 Mhz.  The minimum timing is usually
martin@1579:    met by back-to-back PCI I/O cycles, but we insert a delay to avoid
martin@1579:    "overclocking" issues. */
martin@1579: #define MDIO_DIR		0x80
martin@1579: #define MDIO_DATA_OUT	0x04
martin@1579: #define MDIO_DATA_IN	0x02
martin@1579: #define MDIO_CLK		0x01
martin@1579: #define MDIO_WRITE0 (MDIO_DIR)
martin@1579: #define MDIO_WRITE1 (MDIO_DIR | MDIO_DATA_OUT)
martin@1579: 
martin@1579: #define mdio_delay()	RTL_R8(Config4)
martin@1579: 
martin@1579: 
martin@1579: static const char mii_2_8139_map[8] = {
martin@1579: 	BasicModeCtrl,
martin@1579: 	BasicModeStatus,
martin@1579: 	0,
martin@1579: 	0,
martin@1579: 	NWayAdvert,
martin@1579: 	NWayLPAR,
martin@1579: 	NWayExpansion,
martin@1579: 	0
martin@1579: };
martin@1579: 
martin@1579: 
martin@1579: #ifdef CONFIG_8139TOO_8129
martin@1579: /* Syncronize the MII management interface by shifting 32 one bits out. */
martin@1579: static void mdio_sync (void __iomem *ioaddr)
martin@1579: {
martin@1579: 	int i;
martin@1579: 
martin@1579: 	for (i = 32; i >= 0; i--) {
martin@1579: 		RTL_W8 (Config4, MDIO_WRITE1);
martin@1579: 		mdio_delay ();
martin@1579: 		RTL_W8 (Config4, MDIO_WRITE1 | MDIO_CLK);
martin@1579: 		mdio_delay ();
martin@1579: 	}
martin@1579: }
martin@1579: #endif
martin@1579: 
martin@1579: static int mdio_read (struct net_device *dev, int phy_id, int location)
martin@1579: {
martin@1579: 	struct rtl8139_private *tp = netdev_priv(dev);
martin@1579: 	int retval = 0;
martin@1579: #ifdef CONFIG_8139TOO_8129
martin@1579: 	void __iomem *ioaddr = tp->mmio_addr;
martin@1579: 	int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location;
martin@1579: 	int i;
martin@1579: #endif
martin@1579: 
martin@1579: 	if (phy_id > 31) {	/* Really a 8139.  Use internal registers. */
martin@1579: 		void __iomem *ioaddr = tp->mmio_addr;
martin@1579: 		return location < 8 && mii_2_8139_map[location] ?
martin@1579: 		    RTL_R16 (mii_2_8139_map[location]) : 0;
martin@1579: 	}
martin@1579: 
martin@1579: #ifdef CONFIG_8139TOO_8129
martin@1579: 	mdio_sync (ioaddr);
martin@1579: 	/* Shift the read command bits out. */
martin@1579: 	for (i = 15; i >= 0; i--) {
martin@1579: 		int dataval = (mii_cmd & (1 << i)) ? MDIO_DATA_OUT : 0;
martin@1579: 
martin@1579: 		RTL_W8 (Config4, MDIO_DIR | dataval);
martin@1579: 		mdio_delay ();
martin@1579: 		RTL_W8 (Config4, MDIO_DIR | dataval | MDIO_CLK);
martin@1579: 		mdio_delay ();
martin@1579: 	}
martin@1579: 
martin@1579: 	/* Read the two transition, 16 data, and wire-idle bits. */
martin@1579: 	for (i = 19; i > 0; i--) {
martin@1579: 		RTL_W8 (Config4, 0);
martin@1579: 		mdio_delay ();
martin@1579: 		retval = (retval << 1) | ((RTL_R8 (Config4) & MDIO_DATA_IN) ? 1 : 0);
martin@1579: 		RTL_W8 (Config4, MDIO_CLK);
martin@1579: 		mdio_delay ();
martin@1579: 	}
martin@1579: #endif
martin@1579: 
martin@1579: 	return (retval >> 1) & 0xffff;
martin@1579: }
martin@1579: 
martin@1579: 
martin@1579: static void mdio_write (struct net_device *dev, int phy_id, int location,
martin@1579: 			int value)
martin@1579: {
martin@1579: 	struct rtl8139_private *tp = netdev_priv(dev);
martin@1579: #ifdef CONFIG_8139TOO_8129
martin@1579: 	void __iomem *ioaddr = tp->mmio_addr;
martin@1579: 	int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location << 18) | value;
martin@1579: 	int i;
martin@1579: #endif
martin@1579: 
martin@1579: 	if (phy_id > 31) {	/* Really a 8139.  Use internal registers. */
martin@1579: 		void __iomem *ioaddr = tp->mmio_addr;
martin@1579: 		if (location == 0) {
martin@1579: 			RTL_W8 (Cfg9346, Cfg9346_Unlock);
martin@1579: 			RTL_W16 (BasicModeCtrl, value);
martin@1579: 			RTL_W8 (Cfg9346, Cfg9346_Lock);
martin@1579: 		} else if (location < 8 && mii_2_8139_map[location])
martin@1579: 			RTL_W16 (mii_2_8139_map[location], value);
martin@1579: 		return;
martin@1579: 	}
martin@1579: 
martin@1579: #ifdef CONFIG_8139TOO_8129
martin@1579: 	mdio_sync (ioaddr);
martin@1579: 
martin@1579: 	/* Shift the command bits out. */
martin@1579: 	for (i = 31; i >= 0; i--) {
martin@1579: 		int dataval =
martin@1579: 		    (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
martin@1579: 		RTL_W8 (Config4, dataval);
martin@1579: 		mdio_delay ();
martin@1579: 		RTL_W8 (Config4, dataval | MDIO_CLK);
martin@1579: 		mdio_delay ();
martin@1579: 	}
martin@1579: 	/* Clear out extra bits. */
martin@1579: 	for (i = 2; i > 0; i--) {
martin@1579: 		RTL_W8 (Config4, 0);
martin@1579: 		mdio_delay ();
martin@1579: 		RTL_W8 (Config4, MDIO_CLK);
martin@1579: 		mdio_delay ();
martin@1579: 	}
martin@1579: #endif
martin@1579: }
martin@1579: 
martin@1579: 
martin@1579: static int rtl8139_open (struct net_device *dev)
martin@1579: {
martin@1579: 	struct rtl8139_private *tp = netdev_priv(dev);
martin@1579: 	int retval;
martin@1579: 	void __iomem *ioaddr = tp->mmio_addr;
martin@1579: 
martin@1579: 	if (!tp->ecdev) {
martin@1579: 		retval = request_irq(dev->irq, rtl8139_interrupt,
martin@1579: 			IRQF_SHARED, dev->name, dev);
martin@1579: 		if (retval)
martin@1579: 			return retval;
martin@1579: 	}
martin@1579: 
martin@1579: 	tp->tx_bufs = dma_alloc_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
martin@1579: 					   &tp->tx_bufs_dma, GFP_KERNEL);
martin@1579: 	tp->rx_ring = dma_alloc_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
martin@1579: 					   &tp->rx_ring_dma, GFP_KERNEL);
martin@1579: 	if (tp->tx_bufs == NULL || tp->rx_ring == NULL) {
martin@1579: 		if (!tp->ecdev) free_irq(dev->irq, dev);
martin@1579: 
martin@1579: 		if (tp->tx_bufs)
martin@1579: 			dma_free_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
martin@1579: 					    tp->tx_bufs, tp->tx_bufs_dma);
martin@1579: 		if (tp->rx_ring)
martin@1579: 			dma_free_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
martin@1579: 					    tp->rx_ring, tp->rx_ring_dma);
martin@1579: 
martin@1579: 		return -ENOMEM;
martin@1579: 
martin@1579: 	}
martin@1579: 
martin@1579: 	napi_enable(&tp->napi);
martin@1579: 
martin@1579: 	tp->mii.full_duplex = tp->mii.force_media;
martin@1579: 	tp->tx_flag = (TX_FIFO_THRESH << 11) & 0x003f0000;
martin@1579: 
martin@1579: 	rtl8139_init_ring (dev);
martin@1579: 	rtl8139_hw_start (dev);
martin@1579: 	netif_start_queue (dev);
martin@1579: 
martin@1579: 	if (!tp->ecdev) {
martin@1579: 		if (netif_msg_ifup(tp))
martin@1579: 			pr_debug("%s: rtl8139_open() ioaddr %#llx IRQ %d"
martin@1579: 				" GP Pins %2.2x %s-duplex.\n", dev->name,
martin@1579: 				(unsigned long long)pci_resource_start (tp->pci_dev, 1),
martin@1579: 				dev->irq, RTL_R8 (MediaStatus),
martin@1579: 				tp->mii.full_duplex ? "full" : "half");
martin@1579: 
martin@1579: 		rtl8139_start_thread(tp);
martin@1579: 	}
martin@1579: 
martin@1579: 	return 0;
martin@1579: }
martin@1579: 
martin@1579: 
martin@1579: static void rtl_check_media (struct net_device *dev, unsigned int init_media)
martin@1579: {
martin@1579: 	struct rtl8139_private *tp = netdev_priv(dev);
martin@1579: 
martin@1579: 	if (tp->ecdev) {
martin@1579: 		void __iomem *ioaddr = tp->mmio_addr;
martin@1579: 		u16 state = RTL_R16(BasicModeStatus) & BMSR_LSTATUS;
martin@1579: 		ecdev_set_link(tp->ecdev, state ? 1 : 0);
martin@1579: 	}
martin@1579: 	else {
martin@1579: 		if (tp->phys[0] >= 0) {
martin@1579: 			mii_check_media(&tp->mii, netif_msg_link(tp), init_media);
martin@1579: 		}
martin@1579: 	}
martin@1579: }
martin@1579: 
martin@1579: /* Start the hardware at open or resume. */
martin@1579: static void rtl8139_hw_start (struct net_device *dev)
martin@1579: {
martin@1579: 	struct rtl8139_private *tp = netdev_priv(dev);
martin@1579: 	void __iomem *ioaddr = tp->mmio_addr;
martin@1579: 	u32 i;
martin@1579: 	u8 tmp;
martin@1579: 
martin@1579: 	/* Bring old chips out of low-power mode. */
martin@1579: 	if (rtl_chip_info[tp->chipset].flags & HasHltClk)
martin@1579: 		RTL_W8 (HltClk, 'R');
martin@1579: 
martin@1579: 	rtl8139_chip_reset (ioaddr);
martin@1579: 
martin@1579: 	/* unlock Config[01234] and BMCR register writes */
martin@1579: 	RTL_W8_F (Cfg9346, Cfg9346_Unlock);
martin@1579: 	/* Restore our idea of the MAC address. */
martin@1579: 	RTL_W32_F (MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0)));
martin@1579: 	RTL_W32_F (MAC0 + 4, le16_to_cpu (*(__le16 *) (dev->dev_addr + 4)));
martin@1579: 
martin@1579: 	tp->cur_rx = 0;
martin@1579: 
martin@1579: 	/* init Rx ring buffer DMA address */
martin@1579: 	RTL_W32_F (RxBuf, tp->rx_ring_dma);
martin@1579: 
martin@1579: 	/* Must enable Tx/Rx before setting transfer thresholds! */
martin@1579: 	RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
martin@1579: 
martin@1579: 	tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys;
martin@1579: 	RTL_W32 (RxConfig, tp->rx_config);
martin@1579: 	RTL_W32 (TxConfig, rtl8139_tx_config);
martin@1579: 
martin@1579: 	rtl_check_media (dev, 1);
martin@1579: 
martin@1579: 	if (tp->chipset >= CH_8139B) {
martin@1579: 		/* Disable magic packet scanning, which is enabled
martin@1579: 		 * when PM is enabled in Config1.  It can be reenabled
martin@1579: 		 * via ETHTOOL_SWOL if desired.  */
martin@1579: 		RTL_W8 (Config3, RTL_R8 (Config3) & ~Cfg3_Magic);
martin@1579: 	}
martin@1579: 
martin@1579: 	pr_debug("init buffer addresses\n");
martin@1579: 
martin@1579: 	/* Lock Config[01234] and BMCR register writes */
martin@1579: 	RTL_W8 (Cfg9346, Cfg9346_Lock);
martin@1579: 
martin@1579: 	/* init Tx buffer DMA addresses */
martin@1579: 	for (i = 0; i < NUM_TX_DESC; i++)
martin@1579: 		RTL_W32_F (TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs));
martin@1579: 
martin@1579: 	RTL_W32 (RxMissed, 0);
martin@1579: 
martin@1579: 	rtl8139_set_rx_mode (dev);
martin@1579: 
martin@1579: 	/* no early-rx interrupts */
martin@1579: 	RTL_W16 (MultiIntr, RTL_R16 (MultiIntr) & MultiIntrClear);
martin@1579: 
martin@1579: 	/* make sure RxTx has started */
martin@1579: 	tmp = RTL_R8 (ChipCmd);
martin@1579: 	if ((!(tmp & CmdRxEnb)) || (!(tmp & CmdTxEnb)))
martin@1579: 		RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
martin@1579: 
martin@1579: 	if (!tp->ecdev)
martin@1579: 		/* Enable all known interrupts by setting the interrupt mask. */
martin@1579: 		RTL_W16 (IntrMask, rtl8139_intr_mask);
martin@1579: }
martin@1579: 
martin@1579: 
martin@1579: /* Initialize the Rx and Tx rings, along with various 'dev' bits. */
martin@1579: static void rtl8139_init_ring (struct net_device *dev)
martin@1579: {
martin@1579: 	struct rtl8139_private *tp = netdev_priv(dev);
martin@1579: 	int i;
martin@1579: 
martin@1579: 	tp->cur_rx = 0;
martin@1579: 	tp->cur_tx = 0;
martin@1579: 	tp->dirty_tx = 0;
martin@1579: 
martin@1579: 	for (i = 0; i < NUM_TX_DESC; i++)
martin@1579: 		tp->tx_buf[i] = &tp->tx_bufs[i * TX_BUF_SIZE];
martin@1579: }
martin@1579: 
martin@1579: 
martin@1579: /* This must be global for CONFIG_8139TOO_TUNE_TWISTER case */
martin@1579: static int next_tick = 3 * HZ;
martin@1579: 
martin@1579: #ifndef CONFIG_8139TOO_TUNE_TWISTER
martin@1579: static inline void rtl8139_tune_twister (struct net_device *dev,
martin@1579: 				  struct rtl8139_private *tp) {}
martin@1579: #else
martin@1579: enum TwisterParamVals {
martin@1579: 	PARA78_default	= 0x78fa8388,
martin@1579: 	PARA7c_default	= 0xcb38de43,	/* param[0][3] */
martin@1579: 	PARA7c_xxx	= 0xcb38de43,
martin@1579: };
martin@1579: 
martin@1579: static const unsigned long param[4][4] = {
martin@1579: 	{0xcb39de43, 0xcb39ce43, 0xfb38de03, 0xcb38de43},
martin@1579: 	{0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
martin@1579: 	{0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
martin@1579: 	{0xbb39de43, 0xbb39ce43, 0xbb39ce83, 0xbb39ce83}
martin@1579: };
martin@1579: 
martin@1579: static void rtl8139_tune_twister (struct net_device *dev,
martin@1579: 				  struct rtl8139_private *tp)
martin@1579: {
martin@1579: 	int linkcase;
martin@1579: 	void __iomem *ioaddr = tp->mmio_addr;
martin@1579: 
martin@1579: 	/* This is a complicated state machine to configure the "twister" for
martin@1579: 	   impedance/echos based on the cable length.
martin@1579: 	   All of this is magic and undocumented.
martin@1579: 	 */
martin@1579: 	switch (tp->twistie) {
martin@1579: 	case 1:
martin@1579: 		if (RTL_R16 (CSCR) & CSCR_LinkOKBit) {
martin@1579: 			/* We have link beat, let us tune the twister. */
martin@1579: 			RTL_W16 (CSCR, CSCR_LinkDownOffCmd);
martin@1579: 			tp->twistie = 2;	/* Change to state 2. */
martin@1579: 			next_tick = HZ / 10;
martin@1579: 		} else {
martin@1579: 			/* Just put in some reasonable defaults for when beat returns. */
martin@1579: 			RTL_W16 (CSCR, CSCR_LinkDownCmd);
martin@1579: 			RTL_W32 (FIFOTMS, 0x20);	/* Turn on cable test mode. */
martin@1579: 			RTL_W32 (PARA78, PARA78_default);
martin@1579: 			RTL_W32 (PARA7c, PARA7c_default);
martin@1579: 			tp->twistie = 0;	/* Bail from future actions. */
martin@1579: 		}
martin@1579: 		break;
martin@1579: 	case 2:
martin@1579: 		/* Read how long it took to hear the echo. */
martin@1579: 		linkcase = RTL_R16 (CSCR) & CSCR_LinkStatusBits;
martin@1579: 		if (linkcase == 0x7000)
martin@1579: 			tp->twist_row = 3;
martin@1579: 		else if (linkcase == 0x3000)
martin@1579: 			tp->twist_row = 2;
martin@1579: 		else if (linkcase == 0x1000)
martin@1579: 			tp->twist_row = 1;
martin@1579: 		else
martin@1579: 			tp->twist_row = 0;
martin@1579: 		tp->twist_col = 0;
martin@1579: 		tp->twistie = 3;	/* Change to state 2. */
martin@1579: 		next_tick = HZ / 10;
martin@1579: 		break;
martin@1579: 	case 3:
martin@1579: 		/* Put out four tuning parameters, one per 100msec. */
martin@1579: 		if (tp->twist_col == 0)
martin@1579: 			RTL_W16 (FIFOTMS, 0);
martin@1579: 		RTL_W32 (PARA7c, param[(int) tp->twist_row]
martin@1579: 			 [(int) tp->twist_col]);
martin@1579: 		next_tick = HZ / 10;
martin@1579: 		if (++tp->twist_col >= 4) {
martin@1579: 			/* For short cables we are done.
martin@1579: 			   For long cables (row == 3) check for mistune. */
martin@1579: 			tp->twistie =
martin@1579: 			    (tp->twist_row == 3) ? 4 : 0;
martin@1579: 		}
martin@1579: 		break;
martin@1579: 	case 4:
martin@1579: 		/* Special case for long cables: check for mistune. */
martin@1579: 		if ((RTL_R16 (CSCR) &
martin@1579: 		     CSCR_LinkStatusBits) == 0x7000) {
martin@1579: 			tp->twistie = 0;
martin@1579: 			break;
martin@1579: 		} else {
martin@1579: 			RTL_W32 (PARA7c, 0xfb38de03);
martin@1579: 			tp->twistie = 5;
martin@1579: 			next_tick = HZ / 10;
martin@1579: 		}
martin@1579: 		break;
martin@1579: 	case 5:
martin@1579: 		/* Retune for shorter cable (column 2). */
martin@1579: 		RTL_W32 (FIFOTMS, 0x20);
martin@1579: 		RTL_W32 (PARA78, PARA78_default);
martin@1579: 		RTL_W32 (PARA7c, PARA7c_default);
martin@1579: 		RTL_W32 (FIFOTMS, 0x00);
martin@1579: 		tp->twist_row = 2;
martin@1579: 		tp->twist_col = 0;
martin@1579: 		tp->twistie = 3;
martin@1579: 		next_tick = HZ / 10;
martin@1579: 		break;
martin@1579: 
martin@1579: 	default:
martin@1579: 		/* do nothing */
martin@1579: 		break;
martin@1579: 	}
martin@1579: }
martin@1579: #endif /* CONFIG_8139TOO_TUNE_TWISTER */
martin@1579: 
martin@1579: static inline void rtl8139_thread_iter (struct net_device *dev,
martin@1579: 				 struct rtl8139_private *tp,
martin@1579: 				 void __iomem *ioaddr)
martin@1579: {
martin@1579: 	int mii_lpa;
martin@1579: 
martin@1579: 	mii_lpa = mdio_read (dev, tp->phys[0], MII_LPA);
martin@1579: 
martin@1579: 	if (!tp->mii.force_media && mii_lpa != 0xffff) {
martin@1579: 		int duplex = (mii_lpa & LPA_100FULL)
martin@1579: 		    || (mii_lpa & 0x01C0) == 0x0040;
martin@1579: 		if (tp->mii.full_duplex != duplex) {
martin@1579: 			tp->mii.full_duplex = duplex;
martin@1579: 
martin@1579: 			if (mii_lpa) {
martin@1579: 				pr_info("%s: Setting %s-duplex based on MII #%d link"
martin@1579: 					" partner ability of %4.4x.\n",
martin@1579: 					dev->name,
martin@1579: 					tp->mii.full_duplex ? "full" : "half",
martin@1579: 					tp->phys[0], mii_lpa);
martin@1579: 			} else {
martin@1579: 				pr_info("%s: media is unconnected, link down, or incompatible connection\n",
martin@1579: 				       dev->name);
martin@1579: 			}
martin@1579: #if 0
martin@1579: 			RTL_W8 (Cfg9346, Cfg9346_Unlock);
martin@1579: 			RTL_W8 (Config1, tp->mii.full_duplex ? 0x60 : 0x20);
martin@1579: 			RTL_W8 (Cfg9346, Cfg9346_Lock);
martin@1579: #endif
martin@1579: 		}
martin@1579: 	}
martin@1579: 
martin@1579: 	next_tick = HZ * 60;
martin@1579: 
martin@1579: 	rtl8139_tune_twister (dev, tp);
martin@1579: 
martin@1579: 	pr_debug("%s: Media selection tick, Link partner %4.4x.\n",
martin@1579: 		 dev->name, RTL_R16 (NWayLPAR));
martin@1579: 	pr_debug("%s:  Other registers are IntMask %4.4x IntStatus %4.4x\n",
martin@1579: 		 dev->name, RTL_R16 (IntrMask), RTL_R16 (IntrStatus));
martin@1579: 	pr_debug("%s:  Chip config %2.2x %2.2x.\n",
martin@1579: 		 dev->name, RTL_R8 (Config0),
martin@1579: 		 RTL_R8 (Config1));
martin@1579: }
martin@1579: 
martin@1579: static void rtl8139_thread (struct work_struct *work)
martin@1579: {
martin@1579: 	struct rtl8139_private *tp =
martin@1579: 		container_of(work, struct rtl8139_private, thread.work);
martin@1579: 	struct net_device *dev = tp->mii.dev;
martin@1579: 	unsigned long thr_delay = next_tick;
martin@1579: 
martin@1579: 	rtnl_lock();
martin@1579: 
martin@1579: 	if (!netif_running(dev))
martin@1579: 		goto out_unlock;
martin@1579: 
martin@1579: 	if (tp->watchdog_fired) {
martin@1579: 		tp->watchdog_fired = 0;
martin@1579: 		rtl8139_tx_timeout_task(work);
martin@1579: 	} else
martin@1579: 		rtl8139_thread_iter(dev, tp, tp->mmio_addr);
martin@1579: 
martin@1579: 	if (tp->have_thread)
martin@1579: 		schedule_delayed_work(&tp->thread, thr_delay);
martin@1579: out_unlock:
martin@1579: 	rtnl_unlock ();
martin@1579: }
martin@1579: 
martin@1579: static void rtl8139_start_thread(struct rtl8139_private *tp)
martin@1579: {
martin@1579: 	tp->twistie = 0;
martin@1579: 	if (tp->chipset == CH_8139_K)
martin@1579: 		tp->twistie = 1;
martin@1579: 	else if (tp->drv_flags & HAS_LNK_CHNG)
martin@1579: 		return;
martin@1579: 
martin@1579: 	tp->have_thread = 1;
martin@1579: 	tp->watchdog_fired = 0;
martin@1579: 
martin@1579: 	schedule_delayed_work(&tp->thread, next_tick);
martin@1579: }
martin@1579: 
martin@1579: static inline void rtl8139_tx_clear (struct rtl8139_private *tp)
martin@1579: {
martin@1579: 	tp->cur_tx = 0;
martin@1579: 	tp->dirty_tx = 0;
martin@1579: 
martin@1579: 	/* XXX account for unsent Tx packets in tp->stats.tx_dropped */
martin@1579: }
martin@1579: 
martin@1579: static void rtl8139_tx_timeout_task (struct work_struct *work)
martin@1579: {
martin@1579: 	struct rtl8139_private *tp =
martin@1579: 		container_of(work, struct rtl8139_private, thread.work);
martin@1579: 	struct net_device *dev = tp->mii.dev;
martin@1579: 	void __iomem *ioaddr = tp->mmio_addr;
martin@1579: 	int i;
martin@1579: 	u8 tmp8;
martin@1579: 
martin@1579: 	pr_debug("%s: Transmit timeout, status %2.2x %4.4x %4.4x media %2.2x.\n",
martin@1579: 		dev->name, RTL_R8 (ChipCmd),
martin@1579: 		RTL_R16(IntrStatus), RTL_R16(IntrMask), RTL_R8(MediaStatus));
martin@1579: 	/* Emit info to figure out what went wrong. */
martin@1579: 	pr_debug("%s: Tx queue start entry %ld  dirty entry %ld.\n",
martin@1579: 		dev->name, tp->cur_tx, tp->dirty_tx);
martin@1579: 	for (i = 0; i < NUM_TX_DESC; i++)
martin@1579: 		pr_debug("%s:  Tx descriptor %d is %8.8lx.%s\n",
martin@1579: 			dev->name, i, RTL_R32 (TxStatus0 + (i * 4)),
martin@1579: 			i == tp->dirty_tx % NUM_TX_DESC ?
martin@1579: 				" (queue head)" : "");
martin@1579: 
martin@1579: 	tp->xstats.tx_timeouts++;
martin@1579: 
martin@1579: 	/* disable Tx ASAP, if not already */
martin@1579: 	tmp8 = RTL_R8 (ChipCmd);
martin@1579: 	if (tmp8 & CmdTxEnb)
martin@1579: 		RTL_W8 (ChipCmd, CmdRxEnb);
martin@1579: 
martin@1579: 	if (tp->ecdev) {
martin@1579: 		rtl8139_tx_clear (tp);
martin@1579: 		rtl8139_hw_start (dev);
martin@1579: 	}
martin@1579: 	else {
martin@1579: 	  spin_lock_bh(&tp->rx_lock);
martin@1579: 	  /* Disable interrupts by clearing the interrupt mask. */
martin@1579: 	  RTL_W16 (IntrMask, 0x0000);
martin@1579: 
martin@1579: 	  /* Stop a shared interrupt from scavenging while we are. */
martin@1579: 	  spin_lock_irq(&tp->lock);
martin@1579: 	  rtl8139_tx_clear (tp);
martin@1579: 	  spin_unlock_irq(&tp->lock);
martin@1579: 
martin@1579: 	  /* ...and finally, reset everything */
martin@1579: 	  if (netif_running(dev)) {
martin@1579: 	    rtl8139_hw_start (dev);
martin@1579: 	    netif_wake_queue (dev);
martin@1579: 	  }
martin@1579: 	  spin_unlock_bh(&tp->rx_lock);
martin@1579: 	}
martin@1579: }
martin@1579: 
martin@1579: static void rtl8139_tx_timeout (struct net_device *dev)
martin@1579: {
martin@1579: 	struct rtl8139_private *tp = netdev_priv(dev);
martin@1579: 
martin@1579: 	tp->watchdog_fired = 1;
martin@1579: 	if (!tp->ecdev && !tp->have_thread) {
martin@1579: 		INIT_DELAYED_WORK(&tp->thread, rtl8139_thread);
martin@1579: 		schedule_delayed_work(&tp->thread, next_tick);
martin@1579: 	}
martin@1579: }
martin@1579: 
martin@1579: static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev)
martin@1579: {
martin@1579: 	struct rtl8139_private *tp = netdev_priv(dev);
martin@1579: 	void __iomem *ioaddr = tp->mmio_addr;
martin@1579: 	unsigned int entry;
martin@1579: 	unsigned int len = skb->len;
martin@1579: 	unsigned long flags;
martin@1579: 
martin@1579: 	/* Calculate the next Tx descriptor entry. */
martin@1579: 	entry = tp->cur_tx % NUM_TX_DESC;
martin@1579: 
martin@1579: 	/* Note: the chip doesn't have auto-pad! */
martin@1579: 	if (likely(len < TX_BUF_SIZE)) {
martin@1579: 		if (len < ETH_ZLEN)
martin@1579: 			memset(tp->tx_buf[entry], 0, ETH_ZLEN);
martin@1579: 		skb_copy_and_csum_dev(skb, tp->tx_buf[entry]);
martin@1579: 		if (!tp->ecdev) dev_kfree_skb(skb);
martin@1579: 	} else {
martin@1579: 		if (!tp->ecdev) dev_kfree_skb(skb);
martin@1579: 		dev->stats.tx_dropped++;
martin@1579: 		return 0;
martin@1579: 	}
martin@1579: 
martin@1579: 	if (tp->ecdev) {
martin@1579: 		wmb();
martin@1579: 		RTL_W32_F (TxStatus0 + (entry * sizeof (u32)),
martin@1579: 			tp->tx_flag | max(len, (unsigned int)ETH_ZLEN));
fp@2421: 
martin@1579: 		dev->trans_start = jiffies;
fp@2421: 
martin@1579: 		tp->cur_tx++;
martin@1579: 	} else {
martin@1579: 		spin_lock_irqsave(&tp->lock, flags);
martin@1579: 		/*
martin@1579: 		 * Writing to TxStatus triggers a DMA transfer of the data
martin@1579: 		 * copied to tp->tx_buf[entry] above. Use a memory barrier
martin@1579: 		 * to make sure that the device sees the updated data.
martin@1579: 		 */
martin@1579: 		wmb();
martin@1579: 		RTL_W32_F (TxStatus0 + (entry * sizeof (u32)),
martin@1579: 			   tp->tx_flag | max(len, (unsigned int)ETH_ZLEN));
martin@1579: 
martin@1579: 		dev->trans_start = jiffies;
martin@1579: 
martin@1579: 		tp->cur_tx++;
martin@1579: 
martin@1579: 		if ((tp->cur_tx - NUM_TX_DESC) == tp->dirty_tx)
martin@1579: 			netif_stop_queue (dev);
martin@1579: 		spin_unlock_irqrestore(&tp->lock, flags);
martin@1579: 
martin@1579: 		if (netif_msg_tx_queued(tp))
martin@1579: 			pr_debug("%s: Queued Tx packet size %u to slot %d.\n",
martin@1579: 				dev->name, len, entry);
martin@1579: 	}
martin@1579: 
martin@1579: 	return 0;
martin@1579: }
martin@1579: 
martin@1579: 
martin@1579: static void rtl8139_tx_interrupt (struct net_device *dev,
martin@1579: 				  struct rtl8139_private *tp,
martin@1579: 				  void __iomem *ioaddr)
martin@1579: {
martin@1579: 	unsigned long dirty_tx, tx_left;
martin@1579: 
martin@1579: 	assert (dev != NULL);
martin@1579: 	assert (ioaddr != NULL);
martin@1579: 
martin@1579: 	dirty_tx = tp->dirty_tx;
martin@1579: 	tx_left = tp->cur_tx - dirty_tx;
martin@1579: 	while (tx_left > 0) {
martin@1579: 		int entry = dirty_tx % NUM_TX_DESC;
martin@1579: 		int txstatus;
martin@1579: 
martin@1579: 		txstatus = RTL_R32 (TxStatus0 + (entry * sizeof (u32)));
martin@1579: 
martin@1579: 		if (!(txstatus & (TxStatOK | TxUnderrun | TxAborted)))
martin@1579: 			break;	/* It still hasn't been Txed */
martin@1579: 
martin@1579: 		/* Note: TxCarrierLost is always asserted at 100mbps. */
martin@1579: 		if (txstatus & (TxOutOfWindow | TxAborted)) {
martin@1579: 			/* There was an major error, log it. */
martin@1579: 			if (netif_msg_tx_err(tp))
martin@1579: 				pr_debug("%s: Transmit error, Tx status %8.8x.\n",
martin@1579: 					dev->name, txstatus);
martin@1579: 			dev->stats.tx_errors++;
martin@1579: 			if (txstatus & TxAborted) {
martin@1579: 				dev->stats.tx_aborted_errors++;
martin@1579: 				RTL_W32 (TxConfig, TxClearAbt);
martin@1579: 				RTL_W16 (IntrStatus, TxErr);
martin@1579: 				wmb();
martin@1579: 			}
martin@1579: 			if (txstatus & TxCarrierLost)
martin@1579: 				dev->stats.tx_carrier_errors++;
martin@1579: 			if (txstatus & TxOutOfWindow)
martin@1579: 				dev->stats.tx_window_errors++;
martin@1579: 		} else {
martin@1579: 			if (txstatus & TxUnderrun) {
martin@1579: 				/* Add 64 to the Tx FIFO threshold. */
martin@1579: 				if (tp->tx_flag < 0x00300000)
martin@1579: 					tp->tx_flag += 0x00020000;
martin@1579: 				dev->stats.tx_fifo_errors++;
martin@1579: 			}
martin@1579: 			dev->stats.collisions += (txstatus >> 24) & 15;
martin@1579: 			dev->stats.tx_bytes += txstatus & 0x7ff;
martin@1579: 			dev->stats.tx_packets++;
martin@1579: 		}
martin@1579: 
martin@1579: 		dirty_tx++;
martin@1579: 		tx_left--;
martin@1579: 	}
martin@1579: 
martin@1579: #ifndef RTL8139_NDEBUG
martin@1579: 	if (!tp->ecdev && tp->cur_tx - dirty_tx > NUM_TX_DESC) {
martin@1579: 		pr_err("%s: Out-of-sync dirty pointer, %ld vs. %ld.\n",
martin@1579: 		        dev->name, dirty_tx, tp->cur_tx);
martin@1579: 		dirty_tx += NUM_TX_DESC;
martin@1579: 	}
martin@1579: #endif /* RTL8139_NDEBUG */
martin@1579: 
martin@1579: 	/* only wake the queue if we did work, and the queue is stopped */
martin@1579: 	if (tp->dirty_tx != dirty_tx) {
martin@1579: 		tp->dirty_tx = dirty_tx;
martin@1579: 		mb();
martin@1579: 		if (!tp->ecdev) netif_wake_queue (dev);
martin@1579: 	}
martin@1579: }
martin@1579: 
martin@1579: 
martin@1579: /* TODO: clean this up!  Rx reset need not be this intensive */
martin@1579: static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
martin@1579: 			    struct rtl8139_private *tp, void __iomem *ioaddr)
martin@1579: {
martin@1579: 	u8 tmp8;
martin@1579: #ifdef CONFIG_8139_OLD_RX_RESET
martin@1579: 	int tmp_work;
martin@1579: #endif
martin@1579: 
martin@1579: 	if (netif_msg_rx_err (tp))
martin@1579: 		pr_debug("%s: Ethernet frame had errors, status %8.8x.\n",
martin@1579: 			dev->name, rx_status);
martin@1579: 	dev->stats.rx_errors++;
martin@1579: 	if (!(rx_status & RxStatusOK)) {
martin@1579: 		if (rx_status & RxTooLong) {
martin@1579: 			pr_debug("%s: Oversized Ethernet frame, status %4.4x!\n",
martin@1579: 			 	dev->name, rx_status);
martin@1579: 			/* A.C.: The chip hangs here. */
martin@1579: 		}
martin@1579: 		if (rx_status & (RxBadSymbol | RxBadAlign))
martin@1579: 			dev->stats.rx_frame_errors++;
martin@1579: 		if (rx_status & (RxRunt | RxTooLong))
martin@1579: 			dev->stats.rx_length_errors++;
martin@1579: 		if (rx_status & RxCRCErr)
martin@1579: 			dev->stats.rx_crc_errors++;
martin@1579: 	} else {
martin@1579: 		tp->xstats.rx_lost_in_ring++;
martin@1579: 	}
martin@1579: 
martin@1579: #ifndef CONFIG_8139_OLD_RX_RESET
martin@1579: 	tmp8 = RTL_R8 (ChipCmd);
martin@1579: 	RTL_W8 (ChipCmd, tmp8 & ~CmdRxEnb);
martin@1579: 	RTL_W8 (ChipCmd, tmp8);
martin@1579: 	RTL_W32 (RxConfig, tp->rx_config);
martin@1579: 	tp->cur_rx = 0;
martin@1579: #else
martin@1579: 	/* Reset the receiver, based on RealTek recommendation. (Bug?) */
martin@1579: 
martin@1579: 	/* disable receive */
martin@1579: 	RTL_W8_F (ChipCmd, CmdTxEnb);
martin@1579: 	tmp_work = 200;
martin@1579: 	while (--tmp_work > 0) {
martin@1579: 		udelay(1);
martin@1579: 		tmp8 = RTL_R8 (ChipCmd);
martin@1579: 		if (!(tmp8 & CmdRxEnb))
martin@1579: 			break;
martin@1579: 	}
martin@1579: 	if (tmp_work <= 0)
martin@1579: 		pr_warning(PFX "rx stop wait too long\n");
martin@1579: 	/* restart receive */
martin@1579: 	tmp_work = 200;
martin@1579: 	while (--tmp_work > 0) {
martin@1579: 		RTL_W8_F (ChipCmd, CmdRxEnb | CmdTxEnb);
martin@1579: 		udelay(1);
martin@1579: 		tmp8 = RTL_R8 (ChipCmd);
martin@1579: 		if ((tmp8 & CmdRxEnb) && (tmp8 & CmdTxEnb))
martin@1579: 			break;
martin@1579: 	}
martin@1579: 	if (tmp_work <= 0)
martin@1579: 		pr_warning(PFX "tx/rx enable wait too long\n");
martin@1579: 
martin@1579: 	/* and reinitialize all rx related registers */
martin@1579: 	RTL_W8_F (Cfg9346, Cfg9346_Unlock);
martin@1579: 	/* Must enable Tx/Rx before setting transfer thresholds! */
martin@1579: 	RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
martin@1579: 
martin@1579: 	tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys;
martin@1579: 	RTL_W32 (RxConfig, tp->rx_config);
martin@1579: 	tp->cur_rx = 0;
martin@1579: 
martin@1579: 	pr_debug("init buffer addresses\n");
martin@1579: 
martin@1579: 	/* Lock Config[01234] and BMCR register writes */
martin@1579: 	RTL_W8 (Cfg9346, Cfg9346_Lock);
martin@1579: 
martin@1579: 	/* init Rx ring buffer DMA address */
martin@1579: 	RTL_W32_F (RxBuf, tp->rx_ring_dma);
martin@1579: 
martin@1579: 	/* A.C.: Reset the multicast list. */
martin@1579: 	__set_rx_mode (dev);
martin@1579: #endif
martin@1579: }
martin@1579: 
martin@1579: #if RX_BUF_IDX == 3
martin@1579: static inline void wrap_copy(struct sk_buff *skb, const unsigned char *ring,
martin@1579: 				 u32 offset, unsigned int size)
martin@1579: {
martin@1579: 	u32 left = RX_BUF_LEN - offset;
martin@1579: 
martin@1579: 	if (size > left) {
martin@1579: 		skb_copy_to_linear_data(skb, ring + offset, left);
martin@1579: 		skb_copy_to_linear_data_offset(skb, left, ring, size - left);
martin@1579: 	} else
martin@1579: 		skb_copy_to_linear_data(skb, ring + offset, size);
martin@1579: }
martin@1579: #endif
martin@1579: 
martin@1579: static void rtl8139_isr_ack(struct rtl8139_private *tp)
martin@1579: {
martin@1579: 	void __iomem *ioaddr = tp->mmio_addr;
martin@1579: 	u16 status;
martin@1579: 
martin@1579: 	status = RTL_R16 (IntrStatus) & RxAckBits;
martin@1579: 
martin@1579: 	/* Clear out errors and receive interrupts */
martin@1579: 	if (likely(status != 0)) {
martin@1579: 		if (unlikely(status & (RxFIFOOver | RxOverflow))) {
martin@1579: 			tp->dev->stats.rx_errors++;
martin@1579: 			if (status & RxFIFOOver)
martin@1579: 				tp->dev->stats.rx_fifo_errors++;
martin@1579: 		}
martin@1579: 		RTL_W16_F (IntrStatus, RxAckBits);
martin@1579: 	}
martin@1579: }
martin@1579: 
martin@1579: static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
martin@1579: 		      int budget)
martin@1579: {
martin@1579: 	void __iomem *ioaddr = tp->mmio_addr;
martin@1579: 	int received = 0;
martin@1579: 	unsigned char *rx_ring = tp->rx_ring;
martin@1579: 	unsigned int cur_rx = tp->cur_rx;
martin@1579: 	unsigned int rx_size = 0;
martin@1579: 
martin@1579: 	pr_debug("%s: In rtl8139_rx(), current %4.4x BufAddr %4.4x,"
martin@1579: 		 " free to %4.4x, Cmd %2.2x.\n", dev->name, (u16)cur_rx,
martin@1579: 		 RTL_R16 (RxBufAddr),
martin@1579: 		 RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
martin@1579: 
martin@1579: 	while ((tp->ecdev || netif_running(dev))
martin@1579: 			&& received < budget
martin@1579: 			&& (RTL_R8 (ChipCmd) & RxBufEmpty) == 0) {
martin@1579: 		u32 ring_offset = cur_rx % RX_BUF_LEN;
martin@1579: 		u32 rx_status;
martin@1579: 		unsigned int pkt_size;
martin@1579: 		struct sk_buff *skb;
martin@1579: 
martin@1579: 		rmb();
martin@1579: 
martin@1579: 		/* read size+status of next frame from DMA ring buffer */
martin@1579: 		rx_status = le32_to_cpu (*(__le32 *) (rx_ring + ring_offset));
martin@1579: 		rx_size = rx_status >> 16;
martin@1579: 		pkt_size = rx_size - 4;
martin@1579: 
martin@1579: 		if (!tp->ecdev) {
martin@1579: 			if (netif_msg_rx_status(tp))
martin@1579: 				pr_debug("%s:  rtl8139_rx() status %4.4x, size %4.4x,"
martin@1579: 					" cur %4.4x.\n", dev->name, rx_status,
martin@1579: 				 rx_size, cur_rx);
martin@1579: 		}
martin@1579: #if RTL8139_DEBUG > 2
martin@1579: 		{
martin@1579: 			int i;
martin@1579: 			pr_debug("%s: Frame contents ", dev->name);
martin@1579: 			for (i = 0; i < 70; i++)
martin@1579: 				pr_cont(" %2.2x",
martin@1579: 					rx_ring[ring_offset + i]);
martin@1579: 			pr_cont(".\n");
martin@1579: 		}
martin@1579: #endif
martin@1579: 
martin@1579: 		/* Packet copy from FIFO still in progress.
martin@1579: 		 * Theoretically, this should never happen
martin@1579: 		 * since EarlyRx is disabled.
martin@1579: 		 */
martin@1579: 		if (unlikely(rx_size == 0xfff0)) {
martin@1579: 			if (!tp->fifo_copy_timeout)
martin@1579: 				tp->fifo_copy_timeout = jiffies + 2;
martin@1579: 			else if (time_after(jiffies, tp->fifo_copy_timeout)) {
martin@1579: 				pr_debug("%s: hung FIFO. Reset.", dev->name);
martin@1579: 				rx_size = 0;
martin@1579: 				goto no_early_rx;
martin@1579: 			}
martin@1579: 			if (netif_msg_intr(tp)) {
martin@1579: 				pr_debug("%s: fifo copy in progress.",
martin@1579: 				       dev->name);
martin@1579: 			}
martin@1579: 			tp->xstats.early_rx++;
martin@1579: 			break;
martin@1579: 		}
martin@1579: 
martin@1579: no_early_rx:
martin@1579: 		tp->fifo_copy_timeout = 0;
martin@1579: 
martin@1579: 		/* If Rx err or invalid rx_size/rx_status received
martin@1579: 		 * (which happens if we get lost in the ring),
martin@1579: 		 * Rx process gets reset, so we abort any further
martin@1579: 		 * Rx processing.
martin@1579: 		 */
martin@1579: 		if (unlikely((rx_size > (MAX_ETH_FRAME_SIZE+4)) ||
martin@1579: 			     (rx_size < 8) ||
martin@1579: 			     (!(rx_status & RxStatusOK)))) {
martin@1579: 			rtl8139_rx_err (rx_status, dev, tp, ioaddr);
martin@1579: 			received = -1;
martin@1579: 			goto out;
martin@1579: 		}
martin@1579: 
martin@1579: 		if (tp->ecdev) {
martin@1579: 			ecdev_receive(tp->ecdev,
martin@1579: 					&rx_ring[ring_offset + 4], pkt_size);
martin@1579: 					dev->last_rx = jiffies;
martin@1579: 					dev->stats.rx_bytes += pkt_size;
martin@1579: 					dev->stats.rx_packets++;
martin@1579: 		} else {
martin@1579: 			/* Malloc up new buffer, compatible with net-2e. */
martin@1579: 			/* Omit the four octet CRC from the length. */
martin@1579: 
martin@1579: 			skb = netdev_alloc_skb(dev, pkt_size + NET_IP_ALIGN);
martin@1579: 			if (likely(skb)) {
martin@1579: 				skb_reserve (skb, NET_IP_ALIGN);	/* 16 byte align the IP fields. */
martin@1579: #if RX_BUF_IDX == 3
martin@1579: 				wrap_copy(skb, rx_ring, ring_offset+4, pkt_size);
martin@1579: #else
martin@1579: 				skb_copy_to_linear_data (skb, &rx_ring[ring_offset + 4], pkt_size);
martin@1579: #endif
martin@1579: 				skb_put (skb, pkt_size);
martin@1579: 
martin@1579: 				skb->protocol = eth_type_trans (skb, dev);
martin@1579: 
martin@1579: 				dev->stats.rx_bytes += pkt_size;
martin@1579: 				dev->stats.rx_packets++;
martin@1579: 
martin@1579: 				netif_receive_skb (skb);
martin@1579: 			} else {
martin@1579: 				if (net_ratelimit())
martin@1579: 					pr_warning("%s: Memory squeeze, dropping packet.\n",
martin@1579: 						dev->name);
martin@1579: 				dev->stats.rx_dropped++;
martin@1579: 			}
martin@1579: 		}
martin@1579: 		received++;
martin@1579: 
martin@1579: 		cur_rx = (cur_rx + rx_size + 4 + 3) & ~3;
martin@1579: 		RTL_W16 (RxBufPtr, (u16) (cur_rx - 16));
martin@1579: 
martin@1579: 		rtl8139_isr_ack(tp);
martin@1579: 	}
martin@1579: 
martin@1579: 	if (unlikely(!received || rx_size == 0xfff0))
martin@1579: 		rtl8139_isr_ack(tp);
martin@1579: 
martin@1579: 	pr_debug("%s: Done rtl8139_rx(), current %4.4x BufAddr %4.4x,"
martin@1579: 		 " free to %4.4x, Cmd %2.2x.\n", dev->name, cur_rx,
martin@1579: 		 RTL_R16 (RxBufAddr),
martin@1579: 		 RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
martin@1579: 
martin@1579: 	tp->cur_rx = cur_rx;
martin@1579: 
martin@1579: 	/*
martin@1579: 	 * The receive buffer should be mostly empty.
martin@1579: 	 * Tell NAPI to reenable the Rx irq.
martin@1579: 	 */
martin@1579: 	if (tp->fifo_copy_timeout)
martin@1579: 		received = budget;
martin@1579: 
martin@1579: out:
martin@1579: 	return received;
martin@1579: }
martin@1579: 
martin@1579: 
martin@1579: static void rtl8139_weird_interrupt (struct net_device *dev,
martin@1579: 				     struct rtl8139_private *tp,
martin@1579: 				     void __iomem *ioaddr,
martin@1579: 				     int status, int link_changed)
martin@1579: {
martin@1579: 	pr_debug("%s: Abnormal interrupt, status %8.8x.\n",
martin@1579: 		 dev->name, status);
martin@1579: 
martin@1579: 	assert (dev != NULL);
martin@1579: 	assert (tp != NULL);
martin@1579: 	assert (ioaddr != NULL);
martin@1579: 
martin@1579: 	/* Update the error count. */
martin@1579: 	dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
martin@1579: 	RTL_W32 (RxMissed, 0);
martin@1579: 
martin@1579: 	if ((status & RxUnderrun) && link_changed &&
martin@1579: 	    (tp->drv_flags & HAS_LNK_CHNG)) {
martin@1579: 		rtl_check_media(dev, 0);
martin@1579: 		status &= ~RxUnderrun;
martin@1579: 	}
martin@1579: 
martin@1579: 	if (status & (RxUnderrun | RxErr))
martin@1579: 		dev->stats.rx_errors++;
martin@1579: 
martin@1579: 	if (status & PCSTimeout)
martin@1579: 		dev->stats.rx_length_errors++;
martin@1579: 	if (status & RxUnderrun)
martin@1579: 		dev->stats.rx_fifo_errors++;
martin@1579: 	if (status & PCIErr) {
martin@1579: 		u16 pci_cmd_status;
martin@1579: 		pci_read_config_word (tp->pci_dev, PCI_STATUS, &pci_cmd_status);
martin@1579: 		pci_write_config_word (tp->pci_dev, PCI_STATUS, pci_cmd_status);
martin@1579: 
martin@1579: 		pr_err("%s: PCI Bus error %4.4x.\n",
martin@1579: 			dev->name, pci_cmd_status);
martin@1579: 	}
martin@1579: }
martin@1579: 
martin@1579: static int rtl8139_poll(struct napi_struct *napi, int budget)
martin@1579: {
martin@1579: 	struct rtl8139_private *tp = container_of(napi, struct rtl8139_private, napi);
martin@1579: 	struct net_device *dev = tp->dev;
martin@1579: 	void __iomem *ioaddr = tp->mmio_addr;
martin@1579: 	int work_done;
martin@1579: 
martin@1579: 	spin_lock(&tp->rx_lock);
martin@1579: 	work_done = 0;
martin@1579: 	if (likely(RTL_R16(IntrStatus) & RxAckBits))
martin@1579: 		work_done += rtl8139_rx(dev, tp, budget);
martin@1579: 
martin@1579: 	if (work_done < budget) {
martin@1579: 		unsigned long flags;
martin@1579: 		/*
martin@1579: 		 * Order is important since data can get interrupted
martin@1579: 		 * again when we think we are done.
martin@1579: 		 */
martin@1579: 		spin_lock_irqsave(&tp->lock, flags);
martin@1579: 		RTL_W16_F(IntrMask, rtl8139_intr_mask);
martin@1579: 		__napi_complete(napi);
martin@1579: 		spin_unlock_irqrestore(&tp->lock, flags);
martin@1579: 	}
martin@1579: 	spin_unlock(&tp->rx_lock);
martin@1579: 
martin@1579: 	return work_done;
martin@1579: }
martin@1579: 
martin@1579: void ec_poll(struct net_device *dev)
martin@1579: {
martin@1579:     rtl8139_interrupt(0, dev);
martin@1579: }
martin@1579: 
martin@1579: /* The interrupt handler does all of the Rx thread work and cleans up
martin@1579:    after the Tx thread. */
martin@1579: static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance)
martin@1579: {
martin@1579: 	struct net_device *dev = (struct net_device *) dev_instance;
martin@1579: 	struct rtl8139_private *tp = netdev_priv(dev);
martin@1579: 	void __iomem *ioaddr = tp->mmio_addr;
martin@1579: 	u16 status, ackstat;
martin@1579: 	int link_changed = 0; /* avoid bogus "uninit" warning */
martin@1579: 	int handled = 0;
martin@1579: 
martin@1579: 	if (tp->ecdev) {
martin@1579: 		status = RTL_R16 (IntrStatus);
martin@1579: 	}
martin@1579: 	else {
martin@1579: 		spin_lock (&tp->lock);
martin@1579: 		status = RTL_R16 (IntrStatus);
martin@1579: 
martin@1579: 		/* shared irq? */
martin@1579: 		if (unlikely((status & rtl8139_intr_mask) == 0))
martin@1579: 			goto out;
martin@1579: 	}
martin@1579: 
martin@1579: 	handled = 1;
martin@1579: 
martin@1579: 	/* h/w no longer present (hotplug?) or major error, bail */
martin@1579: 	if (unlikely(status == 0xFFFF))
martin@1579: 		goto out;
martin@1579: 
martin@1579: 	if (!tp->ecdev) {
martin@1579: 		/* close possible race's with dev_close */
martin@1579: 		if (unlikely(!netif_running(dev))) {
martin@1579: 			RTL_W16 (IntrMask, 0);
martin@1579: 			goto out;
martin@1579: 		}
martin@1579: 	}
martin@1579: 
martin@1579: 	/* Acknowledge all of the current interrupt sources ASAP, but
martin@1579: 	   an first get an additional status bit from CSCR. */
martin@1579: 	if (unlikely(status & RxUnderrun))
martin@1579: 		link_changed = RTL_R16 (CSCR) & CSCR_LinkChangeBit;
martin@1579: 
martin@1579: 	ackstat = status & ~(RxAckBits | TxErr);
martin@1579: 	if (ackstat)
martin@1579: 		RTL_W16 (IntrStatus, ackstat);
martin@1579: 
martin@1579: 	/* Receive packets are processed by poll routine.
martin@1579: 	   If not running start it now. */
martin@1579: 	if (status & RxAckBits){
martin@1579: 		if (tp->ecdev) {
martin@1579: 			/* EtherCAT device: Just receive all frames */
martin@1579: 			rtl8139_rx(dev, tp, 100); // FIXME
martin@1579: 		} else {
martin@1579: 			/* Mark for polling */
martin@1579: 			if (napi_schedule_prep(&tp->napi)) {
martin@1579: 				RTL_W16_F (IntrMask, rtl8139_norx_intr_mask);
martin@1579: 				__napi_schedule(&tp->napi);
martin@1579: 			}
martin@1579: 		}
martin@1579: 	}
martin@1579: 
martin@1579: 	/* Check uncommon events with one test. */
martin@1579: 	if (unlikely(status & (PCIErr | PCSTimeout | RxUnderrun | RxErr)))
martin@1579: 		rtl8139_weird_interrupt (dev, tp, ioaddr,
martin@1579: 					 status, link_changed);
martin@1579: 
martin@1579: 	if (status & (TxOK | TxErr)) {
martin@1579: 		rtl8139_tx_interrupt (dev, tp, ioaddr);
martin@1579: 		if (status & TxErr)
martin@1579: 			RTL_W16 (IntrStatus, TxErr);
martin@1579: 	}
martin@1579:  out:
martin@1579: 	if (!tp->ecdev) spin_unlock (&tp->lock);
martin@1579: 
martin@1579: 	pr_debug("%s: exiting interrupt, intr_status=%#4.4x.\n",
martin@1579: 		 dev->name, RTL_R16 (IntrStatus));
martin@1579: 	return IRQ_RETVAL(handled);
martin@1579: }
martin@1579: 
martin@1579: #ifdef CONFIG_NET_POLL_CONTROLLER
martin@1579: /*
martin@1579:  * Polling receive - used by netconsole and other diagnostic tools
martin@1579:  * to allow network i/o with interrupts disabled.
martin@1579:  */
martin@1579: static void rtl8139_poll_controller(struct net_device *dev)
martin@1579: {
martin@1579: 	disable_irq(dev->irq);
martin@1579: 	rtl8139_interrupt(dev->irq, dev);
martin@1579: 	enable_irq(dev->irq);
martin@1579: }
martin@1579: #endif
martin@1579: 
martin@1579: static int rtl8139_set_mac_address(struct net_device *dev, void *p)
martin@1579: {
martin@1579: 	struct rtl8139_private *tp = netdev_priv(dev);
martin@1579: 	void __iomem *ioaddr = tp->mmio_addr;
martin@1579: 	struct sockaddr *addr = p;
martin@1579: 
martin@1579: 	if (!is_valid_ether_addr(addr->sa_data))
martin@1579: 		return -EADDRNOTAVAIL;
martin@1579: 
martin@1579: 	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
martin@1579: 
martin@1579: 	spin_lock_irq(&tp->lock);
martin@1579: 
martin@1579: 	RTL_W8_F(Cfg9346, Cfg9346_Unlock);
martin@1579: 	RTL_W32_F(MAC0 + 0, cpu_to_le32 (*(u32 *) (dev->dev_addr + 0)));
martin@1579: 	RTL_W32_F(MAC0 + 4, cpu_to_le32 (*(u32 *) (dev->dev_addr + 4)));
martin@1579: 	RTL_W8_F(Cfg9346, Cfg9346_Lock);
martin@1579: 
martin@1579: 	spin_unlock_irq(&tp->lock);
martin@1579: 
martin@1579: 	return 0;
martin@1579: }
martin@1579: 
martin@1579: static int rtl8139_close (struct net_device *dev)
martin@1579: {
martin@1579: 	struct rtl8139_private *tp = netdev_priv(dev);
martin@1579: 	void __iomem *ioaddr = tp->mmio_addr;
martin@1579: 	unsigned long flags;
martin@1579: 
martin@1579: 	if (tp->ecdev) {
martin@1579: 		/* Stop the chip's Tx and Rx DMA processes. */
martin@1579: 		RTL_W8 (ChipCmd, 0);
martin@1579: 
martin@1579: 		/* Disable interrupts by clearing the interrupt mask. */
martin@1579: 		RTL_W16 (IntrMask, 0);
martin@1579: 
martin@1579: 		/* Update the error counts. */
martin@1579: 		dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
martin@1579: 		RTL_W32 (RxMissed, 0);
martin@1579: 	} else {
martin@1579: 		netif_stop_queue(dev);
martin@1579: 		napi_disable(&tp->napi);
martin@1579: 
martin@1579: 		if (netif_msg_ifdown(tp))
martin@1579: 			pr_debug("%s: Shutting down ethercard, status was 0x%4.4x.\n",
martin@1579: 				dev->name, RTL_R16 (IntrStatus));
martin@1579: 
martin@1579: 		spin_lock_irqsave (&tp->lock, flags);
martin@1579: 
martin@1579: 		/* Stop the chip's Tx and Rx DMA processes. */
martin@1579: 		RTL_W8 (ChipCmd, 0);
martin@1579: 
martin@1579: 		/* Disable interrupts by clearing the interrupt mask. */
martin@1579: 		RTL_W16 (IntrMask, 0);
martin@1579: 
martin@1579: 		/* Update the error counts. */
martin@1579: 		dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
martin@1579: 		RTL_W32 (RxMissed, 0);
martin@1579: 
martin@1579: 		spin_unlock_irqrestore (&tp->lock, flags);
martin@1579: 
martin@1579: 		free_irq (dev->irq, dev);
martin@1579: 	}
martin@1579: 
martin@1579: 	rtl8139_tx_clear (tp);
martin@1579: 
martin@1579: 	dma_free_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
martin@1579: 			  tp->rx_ring, tp->rx_ring_dma);
martin@1579: 	dma_free_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
martin@1579: 			  tp->tx_bufs, tp->tx_bufs_dma);
martin@1579: 	tp->rx_ring = NULL;
martin@1579: 	tp->tx_bufs = NULL;
martin@1579: 
martin@1579: 	/* Green! Put the chip in low-power mode. */
martin@1579: 	RTL_W8 (Cfg9346, Cfg9346_Unlock);
martin@1579: 
martin@1579: 	if (rtl_chip_info[tp->chipset].flags & HasHltClk)
martin@1579: 		RTL_W8 (HltClk, 'H');	/* 'R' would leave the clock running. */
martin@1579: 
martin@1579: 	return 0;
martin@1579: }
martin@1579: 
martin@1579: 
martin@1579: /* Get the ethtool Wake-on-LAN settings.  Assumes that wol points to
martin@1579:    kernel memory, *wol has been initialized as {ETHTOOL_GWOL}, and
martin@1579:    other threads or interrupts aren't messing with the 8139.  */
martin@1579: static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
martin@1579: {
martin@1579: 	struct rtl8139_private *tp = netdev_priv(dev);
martin@1579: 	void __iomem *ioaddr = tp->mmio_addr;
martin@1579: 
martin@1579: 	spin_lock_irq(&tp->lock);
martin@1579: 	if (rtl_chip_info[tp->chipset].flags & HasLWake) {
martin@1579: 		u8 cfg3 = RTL_R8 (Config3);
martin@1579: 		u8 cfg5 = RTL_R8 (Config5);
martin@1579: 
martin@1579: 		wol->supported = WAKE_PHY | WAKE_MAGIC
martin@1579: 			| WAKE_UCAST | WAKE_MCAST | WAKE_BCAST;
martin@1579: 
martin@1579: 		wol->wolopts = 0;
martin@1579: 		if (cfg3 & Cfg3_LinkUp)
martin@1579: 			wol->wolopts |= WAKE_PHY;
martin@1579: 		if (cfg3 & Cfg3_Magic)
martin@1579: 			wol->wolopts |= WAKE_MAGIC;
martin@1579: 		/* (KON)FIXME: See how netdev_set_wol() handles the
martin@1579: 		   following constants.  */
martin@1579: 		if (cfg5 & Cfg5_UWF)
martin@1579: 			wol->wolopts |= WAKE_UCAST;
martin@1579: 		if (cfg5 & Cfg5_MWF)
martin@1579: 			wol->wolopts |= WAKE_MCAST;
martin@1579: 		if (cfg5 & Cfg5_BWF)
martin@1579: 			wol->wolopts |= WAKE_BCAST;
martin@1579: 	}
martin@1579: 	spin_unlock_irq(&tp->lock);
martin@1579: }
martin@1579: 
martin@1579: 
martin@1579: /* Set the ethtool Wake-on-LAN settings.  Return 0 or -errno.  Assumes
martin@1579:    that wol points to kernel memory and other threads or interrupts
martin@1579:    aren't messing with the 8139.  */
martin@1579: static int rtl8139_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
martin@1579: {
martin@1579: 	struct rtl8139_private *tp = netdev_priv(dev);
martin@1579: 	void __iomem *ioaddr = tp->mmio_addr;
martin@1579: 	u32 support;
martin@1579: 	u8 cfg3, cfg5;
martin@1579: 
martin@1579: 	support = ((rtl_chip_info[tp->chipset].flags & HasLWake)
martin@1579: 		   ? (WAKE_PHY | WAKE_MAGIC
martin@1579: 		      | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST)
martin@1579: 		   : 0);
martin@1579: 	if (wol->wolopts & ~support)
martin@1579: 		return -EINVAL;
martin@1579: 
martin@1579: 	spin_lock_irq(&tp->lock);
martin@1579: 	cfg3 = RTL_R8 (Config3) & ~(Cfg3_LinkUp | Cfg3_Magic);
martin@1579: 	if (wol->wolopts & WAKE_PHY)
martin@1579: 		cfg3 |= Cfg3_LinkUp;
martin@1579: 	if (wol->wolopts & WAKE_MAGIC)
martin@1579: 		cfg3 |= Cfg3_Magic;
martin@1579: 	RTL_W8 (Cfg9346, Cfg9346_Unlock);
martin@1579: 	RTL_W8 (Config3, cfg3);
martin@1579: 	RTL_W8 (Cfg9346, Cfg9346_Lock);
martin@1579: 
martin@1579: 	cfg5 = RTL_R8 (Config5) & ~(Cfg5_UWF | Cfg5_MWF | Cfg5_BWF);
martin@1579: 	/* (KON)FIXME: These are untested.  We may have to set the
martin@1579: 	   CRC0, Wakeup0 and LSBCRC0 registers too, but I have no
martin@1579: 	   documentation.  */
martin@1579: 	if (wol->wolopts & WAKE_UCAST)
martin@1579: 		cfg5 |= Cfg5_UWF;
martin@1579: 	if (wol->wolopts & WAKE_MCAST)
martin@1579: 		cfg5 |= Cfg5_MWF;
martin@1579: 	if (wol->wolopts & WAKE_BCAST)
martin@1579: 		cfg5 |= Cfg5_BWF;
martin@1579: 	RTL_W8 (Config5, cfg5);	/* need not unlock via Cfg9346 */
martin@1579: 	spin_unlock_irq(&tp->lock);
martin@1579: 
martin@1579: 	return 0;
martin@1579: }
martin@1579: 
martin@1579: static void rtl8139_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
martin@1579: {
martin@1579: 	struct rtl8139_private *tp = netdev_priv(dev);
martin@1579: 	strcpy(info->driver, DRV_NAME);
martin@1579: 	strcpy(info->version, DRV_VERSION);
martin@1579: 	strcpy(info->bus_info, pci_name(tp->pci_dev));
martin@1579: 	info->regdump_len = tp->regs_len;
martin@1579: }
martin@1579: 
martin@1579: static int rtl8139_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
martin@1579: {
martin@1579: 	struct rtl8139_private *tp = netdev_priv(dev);
martin@1579: 	spin_lock_irq(&tp->lock);
martin@1579: 	mii_ethtool_gset(&tp->mii, cmd);
martin@1579: 	spin_unlock_irq(&tp->lock);
martin@1579: 	return 0;
martin@1579: }
martin@1579: 
martin@1579: static int rtl8139_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
martin@1579: {
martin@1579: 	struct rtl8139_private *tp = netdev_priv(dev);
martin@1579: 	int rc;
martin@1579: 	spin_lock_irq(&tp->lock);
martin@1579: 	rc = mii_ethtool_sset(&tp->mii, cmd);
martin@1579: 	spin_unlock_irq(&tp->lock);
martin@1579: 	return rc;
martin@1579: }
martin@1579: 
martin@1579: static int rtl8139_nway_reset(struct net_device *dev)
martin@1579: {
martin@1579: 	struct rtl8139_private *tp = netdev_priv(dev);
martin@1579: 	return mii_nway_restart(&tp->mii);
martin@1579: }
martin@1579: 
martin@1579: static u32 rtl8139_get_link(struct net_device *dev)
martin@1579: {
martin@1579: 	struct rtl8139_private *tp = netdev_priv(dev);
martin@1579: 	return mii_link_ok(&tp->mii);
martin@1579: }
martin@1579: 
martin@1579: static u32 rtl8139_get_msglevel(struct net_device *dev)
martin@1579: {
martin@1579: 	struct rtl8139_private *tp = netdev_priv(dev);
martin@1579: 	return tp->msg_enable;
martin@1579: }
martin@1579: 
martin@1579: static void rtl8139_set_msglevel(struct net_device *dev, u32 datum)
martin@1579: {
martin@1579: 	struct rtl8139_private *tp = netdev_priv(dev);
martin@1579: 	tp->msg_enable = datum;
martin@1579: }
martin@1579: 
martin@1579: static int rtl8139_get_regs_len(struct net_device *dev)
martin@1579: {
martin@1579: 	struct rtl8139_private *tp;
martin@1579: 	/* TODO: we are too slack to do reg dumping for pio, for now */
martin@1579: 	if (use_io)
martin@1579: 		return 0;
martin@1579: 	tp = netdev_priv(dev);
martin@1579: 	return tp->regs_len;
martin@1579: }
martin@1579: 
martin@1579: static void rtl8139_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf)
martin@1579: {
martin@1579: 	struct rtl8139_private *tp;
martin@1579: 
martin@1579: 	/* TODO: we are too slack to do reg dumping for pio, for now */
martin@1579: 	if (use_io)
martin@1579: 		return;
martin@1579: 	tp = netdev_priv(dev);
martin@1579: 
martin@1579: 	regs->version = RTL_REGS_VER;
martin@1579: 
martin@1579: 	spin_lock_irq(&tp->lock);
martin@1579: 	memcpy_fromio(regbuf, tp->mmio_addr, regs->len);
martin@1579: 	spin_unlock_irq(&tp->lock);
martin@1579: }
martin@1579: 
martin@1579: static int rtl8139_get_sset_count(struct net_device *dev, int sset)
martin@1579: {
martin@1579: 	switch (sset) {
martin@1579: 	case ETH_SS_STATS:
martin@1579: 		return RTL_NUM_STATS;
martin@1579: 	default:
martin@1579: 		return -EOPNOTSUPP;
martin@1579: 	}
martin@1579: }
martin@1579: 
martin@1579: static void rtl8139_get_ethtool_stats(struct net_device *dev, struct ethtool_stats *stats, u64 *data)
martin@1579: {
martin@1579: 	struct rtl8139_private *tp = netdev_priv(dev);
martin@1579: 
martin@1579: 	data[0] = tp->xstats.early_rx;
martin@1579: 	data[1] = tp->xstats.tx_buf_mapped;
martin@1579: 	data[2] = tp->xstats.tx_timeouts;
martin@1579: 	data[3] = tp->xstats.rx_lost_in_ring;
martin@1579: }
martin@1579: 
martin@1579: static void rtl8139_get_strings(struct net_device *dev, u32 stringset, u8 *data)
martin@1579: {
martin@1579: 	memcpy(data, ethtool_stats_keys, sizeof(ethtool_stats_keys));
martin@1579: }
martin@1579: 
martin@1579: static const struct ethtool_ops rtl8139_ethtool_ops = {
martin@1579: 	.get_drvinfo		= rtl8139_get_drvinfo,
martin@1579: 	.get_settings		= rtl8139_get_settings,
martin@1579: 	.set_settings		= rtl8139_set_settings,
martin@1579: 	.get_regs_len		= rtl8139_get_regs_len,
martin@1579: 	.get_regs		= rtl8139_get_regs,
martin@1579: 	.nway_reset		= rtl8139_nway_reset,
martin@1579: 	.get_link		= rtl8139_get_link,
martin@1579: 	.get_msglevel		= rtl8139_get_msglevel,
martin@1579: 	.set_msglevel		= rtl8139_set_msglevel,
martin@1579: 	.get_wol		= rtl8139_get_wol,
martin@1579: 	.set_wol		= rtl8139_set_wol,
martin@1579: 	.get_strings		= rtl8139_get_strings,
martin@1579: 	.get_sset_count		= rtl8139_get_sset_count,
martin@1579: 	.get_ethtool_stats	= rtl8139_get_ethtool_stats,
martin@1579: };
martin@1579: 
martin@1579: static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
martin@1579: {
martin@1579: 	struct rtl8139_private *tp = netdev_priv(dev);
martin@1579: 	int rc;
martin@1579: 
martin@1579: 	if (tp->ecdev || !netif_running(dev))
martin@1579: 		return -EINVAL;
martin@1579: 
martin@1579: 	spin_lock_irq(&tp->lock);
martin@1579: 	rc = generic_mii_ioctl(&tp->mii, if_mii(rq), cmd, NULL);
martin@1579: 	spin_unlock_irq(&tp->lock);
martin@1579: 
martin@1579: 	return rc;
martin@1579: }
martin@1579: 
martin@1579: 
martin@1579: static struct net_device_stats *rtl8139_get_stats (struct net_device *dev)
martin@1579: {
martin@1579: 	struct rtl8139_private *tp = netdev_priv(dev);
martin@1579: 	void __iomem *ioaddr = tp->mmio_addr;
martin@1579: 	unsigned long flags;
martin@1579: 
martin@1579: 	if (tp->ecdev || netif_running(dev)) {
martin@1579: 		spin_lock_irqsave (&tp->lock, flags);
martin@1579: 		dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
martin@1579: 		RTL_W32 (RxMissed, 0);
martin@1579: 		spin_unlock_irqrestore (&tp->lock, flags);
martin@1579: 	}
martin@1579: 
martin@1579: 	return &dev->stats;
martin@1579: }
martin@1579: 
martin@1579: /* Set or clear the multicast filter for this adaptor.
martin@1579:    This routine is not state sensitive and need not be SMP locked. */
martin@1579: 
martin@1579: static void __set_rx_mode (struct net_device *dev)
martin@1579: {
martin@1579: 	struct rtl8139_private *tp = netdev_priv(dev);
martin@1579: 	void __iomem *ioaddr = tp->mmio_addr;
martin@1579: 	u32 mc_filter[2];	/* Multicast hash filter */
martin@1579: 	int i, rx_mode;
martin@1579: 	u32 tmp;
martin@1579: 
martin@1579: 	pr_debug("%s:   rtl8139_set_rx_mode(%4.4x) done -- Rx config %8.8lx.\n",
martin@1579: 			dev->name, dev->flags, RTL_R32 (RxConfig));
martin@1579: 
martin@1579: 	/* Note: do not reorder, GCC is clever about common statements. */
martin@1579: 	if (dev->flags & IFF_PROMISC) {
martin@1579: 		rx_mode =
martin@1579: 		    AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
martin@1579: 		    AcceptAllPhys;
martin@1579: 		mc_filter[1] = mc_filter[0] = 0xffffffff;
martin@1579: 	} else if ((dev->mc_count > multicast_filter_limit)
martin@1579: 		   || (dev->flags & IFF_ALLMULTI)) {
martin@1579: 		/* Too many to filter perfectly -- accept all multicasts. */
martin@1579: 		rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
martin@1579: 		mc_filter[1] = mc_filter[0] = 0xffffffff;
martin@1579: 	} else {
martin@1579: 		struct dev_mc_list *mclist;
martin@1579: 		rx_mode = AcceptBroadcast | AcceptMyPhys;
martin@1579: 		mc_filter[1] = mc_filter[0] = 0;
martin@1579: 		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
martin@1579: 		     i++, mclist = mclist->next) {
martin@1579: 			int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
martin@1579: 
martin@1579: 			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
martin@1579: 			rx_mode |= AcceptMulticast;
martin@1579: 		}
martin@1579: 	}
martin@1579: 
martin@1579: 	/* We can safely update without stopping the chip. */
martin@1579: 	tmp = rtl8139_rx_config | rx_mode;
martin@1579: 	if (tp->rx_config != tmp) {
martin@1579: 		RTL_W32_F (RxConfig, tmp);
martin@1579: 		tp->rx_config = tmp;
martin@1579: 	}
martin@1579: 	RTL_W32_F (MAR0 + 0, mc_filter[0]);
martin@1579: 	RTL_W32_F (MAR0 + 4, mc_filter[1]);
martin@1579: }
martin@1579: 
martin@1579: static void rtl8139_set_rx_mode (struct net_device *dev)
martin@1579: {
martin@1579: 	unsigned long flags;
martin@1579: 	struct rtl8139_private *tp = netdev_priv(dev);
martin@1579: 
martin@1579: 	spin_lock_irqsave (&tp->lock, flags);
martin@1579: 	__set_rx_mode(dev);
martin@1579: 	spin_unlock_irqrestore (&tp->lock, flags);
martin@1579: }
martin@1579: 
martin@1579: #ifdef CONFIG_PM
martin@1579: 
martin@1579: static int rtl8139_suspend (struct pci_dev *pdev, pm_message_t state)
martin@1579: {
martin@1579: 	struct net_device *dev = pci_get_drvdata (pdev);
martin@1579: 	struct rtl8139_private *tp = netdev_priv(dev);
martin@1579: 	void __iomem *ioaddr = tp->mmio_addr;
martin@1579: 	unsigned long flags;
martin@1579: 
martin@1579: 	pci_save_state (pdev);
martin@1579: 
martin@1579: 	if (tp->ecdev || !netif_running (dev))
martin@1579: 		return 0;
martin@1579: 
martin@1579: 	netif_device_detach (dev);
martin@1579: 
martin@1579: 	spin_lock_irqsave (&tp->lock, flags);
martin@1579: 
martin@1579: 	/* Disable interrupts, stop Tx and Rx. */
martin@1579: 	RTL_W16 (IntrMask, 0);
martin@1579: 	RTL_W8 (ChipCmd, 0);
martin@1579: 
martin@1579: 	/* Update the error counts. */
martin@1579: 	dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
martin@1579: 	RTL_W32 (RxMissed, 0);
martin@1579: 
martin@1579: 	spin_unlock_irqrestore (&tp->lock, flags);
martin@1579: 
martin@1579: 	pci_set_power_state (pdev, PCI_D3hot);
martin@1579: 
martin@1579: 	return 0;
martin@1579: }
martin@1579: 
martin@1579: 
martin@1579: static int rtl8139_resume (struct pci_dev *pdev)
martin@1579: {
martin@1579: 	struct net_device *dev = pci_get_drvdata (pdev);
martin@1579: 	struct rtl8139_private *tp = netdev_priv(dev);
martin@1579: 
martin@1579: 	pci_restore_state (pdev);
martin@1579: 	if (tp->ecdev || !netif_running (dev))
martin@1579: 		return 0;
martin@1579: 	pci_set_power_state (pdev, PCI_D0);
martin@1579: 	rtl8139_init_ring (dev);
martin@1579: 	rtl8139_hw_start (dev);
martin@1579: 	netif_device_attach (dev);
martin@1579: 	return 0;
martin@1579: }
martin@1579: 
martin@1579: #endif /* CONFIG_PM */
martin@1579: 
martin@1579: 
martin@1579: static struct pci_driver rtl8139_pci_driver = {
martin@1579: 	.name		= DRV_NAME,
martin@1579: 	.id_table	= rtl8139_pci_tbl,
martin@1579: 	.probe		= rtl8139_init_one,
martin@1579: 	.remove		= __devexit_p(rtl8139_remove_one),
martin@1579: #ifdef CONFIG_PM
martin@1579: 	.suspend	= rtl8139_suspend,
martin@1579: 	.resume		= rtl8139_resume,
martin@1579: #endif /* CONFIG_PM */
martin@1579: };
martin@1579: 
martin@1579: 
martin@1579: static int __init rtl8139_init_module (void)
martin@1579: {
martin@1579: 	/* when we're a module, we always print a version message,
martin@1579: 	 * even if no 8139 board is found.
martin@1579: 	 */
martin@1579: #ifdef MODULE
martin@1579: 	pr_info(RTL8139_DRIVER_NAME "\n");
martin@1579: #endif
martin@1579: 
martin@1579: 	return pci_register_driver(&rtl8139_pci_driver);
martin@1579: }
martin@1579: 
martin@1579: 
martin@1579: static void __exit rtl8139_cleanup_module (void)
martin@1579: {
martin@1579: 	pci_unregister_driver (&rtl8139_pci_driver);
martin@1579: }
martin@1579: 
martin@1579: 
martin@1579: module_init(rtl8139_init_module);
martin@1579: module_exit(rtl8139_cleanup_module);