fp@2685: /* Intel(R) Gigabit Ethernet Linux driver
fp@2685: * Copyright(c) 2007-2014 Intel Corporation.
fp@2685: *
fp@2685: * This program is free software; you can redistribute it and/or modify it
fp@2685: * under the terms and conditions of the GNU General Public License,
fp@2685: * version 2, as published by the Free Software Foundation.
fp@2685: *
fp@2685: * This program is distributed in the hope it will be useful, but WITHOUT
fp@2685: * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
fp@2685: * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
fp@2685: * more details.
fp@2685: *
fp@2685: * You should have received a copy of the GNU General Public License along with
fp@2685: * this program; if not, see .
fp@2685: *
fp@2685: * The full GNU General Public License is included in this distribution in
fp@2685: * the file called "COPYING".
fp@2685: *
fp@2685: * Contact Information:
fp@2685: * e1000-devel Mailing List
fp@2685: * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
fp@2685: */
fp@2685:
fp@2685: #ifndef _E1000_REGS_H_
fp@2685: #define _E1000_REGS_H_
fp@2685:
fp@2685: #define E1000_CTRL 0x00000 /* Device Control - RW */
fp@2685: #define E1000_STATUS 0x00008 /* Device Status - RO */
fp@2685: #define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */
fp@2685: #define E1000_EERD 0x00014 /* EEPROM Read - RW */
fp@2685: #define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */
fp@2685: #define E1000_MDIC 0x00020 /* MDI Control - RW */
fp@2685: #define E1000_MDICNFG 0x00E04 /* MDI Config - RW */
fp@2685: #define E1000_SCTL 0x00024 /* SerDes Control - RW */
fp@2685: #define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */
fp@2685: #define E1000_FCAH 0x0002C /* Flow Control Address High -RW */
fp@2685: #define E1000_FCT 0x00030 /* Flow Control Type - RW */
fp@2685: #define E1000_CONNSW 0x00034 /* Copper/Fiber switch control - RW */
fp@2685: #define E1000_VET 0x00038 /* VLAN Ether Type - RW */
fp@2685: #define E1000_TSSDP 0x0003C /* Time Sync SDP Configuration Register - RW */
fp@2685: #define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */
fp@2685: #define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */
fp@2685: #define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */
fp@2685: #define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */
fp@2685: #define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */
fp@2685: #define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */
fp@2685: #define E1000_RCTL 0x00100 /* RX Control - RW */
fp@2685: #define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */
fp@2685: #define E1000_TXCW 0x00178 /* TX Configuration Word - RW */
fp@2685: #define E1000_EICR 0x01580 /* Ext. Interrupt Cause Read - R/clr */
fp@2685: #define E1000_EITR(_n) (0x01680 + (0x4 * (_n)))
fp@2685: #define E1000_EICS 0x01520 /* Ext. Interrupt Cause Set - W0 */
fp@2685: #define E1000_EIMS 0x01524 /* Ext. Interrupt Mask Set/Read - RW */
fp@2685: #define E1000_EIMC 0x01528 /* Ext. Interrupt Mask Clear - WO */
fp@2685: #define E1000_EIAC 0x0152C /* Ext. Interrupt Auto Clear - RW */
fp@2685: #define E1000_EIAM 0x01530 /* Ext. Interrupt Ack Auto Clear Mask - RW */
fp@2685: #define E1000_GPIE 0x01514 /* General Purpose Interrupt Enable - RW */
fp@2685: #define E1000_IVAR0 0x01700 /* Interrupt Vector Allocation (array) - RW */
fp@2685: #define E1000_IVAR_MISC 0x01740 /* IVAR for "other" causes - RW */
fp@2685: #define E1000_TCTL 0x00400 /* TX Control - RW */
fp@2685: #define E1000_TCTL_EXT 0x00404 /* Extended TX Control - RW */
fp@2685: #define E1000_TIPG 0x00410 /* TX Inter-packet gap -RW */
fp@2685: #define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */
fp@2685: #define E1000_LEDCTL 0x00E00 /* LED Control - RW */
fp@2685: #define E1000_LEDMUX 0x08130 /* LED MUX Control */
fp@2685: #define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */
fp@2685: #define E1000_PBS 0x01008 /* Packet Buffer Size */
fp@2685: #define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */
fp@2685: #define E1000_EEARBC_I210 0x12024 /* EEPROM Auto Read Bus Control */
fp@2685: #define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */
fp@2685: #define E1000_I2CCMD 0x01028 /* SFPI2C Command Register - RW */
fp@2685: #define E1000_FRTIMER 0x01048 /* Free Running Timer - RW */
fp@2685: #define E1000_TCPTIMER 0x0104C /* TCP Timer - RW */
fp@2685: #define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */
fp@2685: #define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */
fp@2685: #define E1000_FCRTV 0x02460 /* Flow Control Refresh Timer Value - RW */
fp@2685: #define E1000_I2CPARAMS 0x0102C /* SFPI2C Parameters Register - RW */
fp@2685: #define E1000_I2CBB_EN 0x00000100 /* I2C - Bit Bang Enable */
fp@2685: #define E1000_I2C_CLK_OUT 0x00000200 /* I2C- Clock */
fp@2685: #define E1000_I2C_DATA_OUT 0x00000400 /* I2C- Data Out */
fp@2685: #define E1000_I2C_DATA_OE_N 0x00000800 /* I2C- Data Output Enable */
fp@2685: #define E1000_I2C_DATA_IN 0x00001000 /* I2C- Data In */
fp@2685: #define E1000_I2C_CLK_OE_N 0x00002000 /* I2C- Clock Output Enable */
fp@2685: #define E1000_I2C_CLK_IN 0x00004000 /* I2C- Clock In */
fp@2685: #define E1000_MPHY_ADDR_CTRL 0x0024 /* GbE MPHY Address Control */
fp@2685: #define E1000_MPHY_DATA 0x0E10 /* GBE MPHY Data */
fp@2685: #define E1000_MPHY_STAT 0x0E0C /* GBE MPHY Statistics */
fp@2685:
fp@2685: /* IEEE 1588 TIMESYNCH */
fp@2685: #define E1000_TSYNCRXCTL 0x0B620 /* Rx Time Sync Control register - RW */
fp@2685: #define E1000_TSYNCTXCTL 0x0B614 /* Tx Time Sync Control register - RW */
fp@2685: #define E1000_TSYNCRXCFG 0x05F50 /* Time Sync Rx Configuration - RW */
fp@2685: #define E1000_RXSTMPL 0x0B624 /* Rx timestamp Low - RO */
fp@2685: #define E1000_RXSTMPH 0x0B628 /* Rx timestamp High - RO */
fp@2685: #define E1000_RXSATRL 0x0B62C /* Rx timestamp attribute low - RO */
fp@2685: #define E1000_RXSATRH 0x0B630 /* Rx timestamp attribute high - RO */
fp@2685: #define E1000_TXSTMPL 0x0B618 /* Tx timestamp value Low - RO */
fp@2685: #define E1000_TXSTMPH 0x0B61C /* Tx timestamp value High - RO */
fp@2685: #define E1000_SYSTIML 0x0B600 /* System time register Low - RO */
fp@2685: #define E1000_SYSTIMH 0x0B604 /* System time register High - RO */
fp@2685: #define E1000_TIMINCA 0x0B608 /* Increment attributes register - RW */
fp@2685: #define E1000_TSAUXC 0x0B640 /* Timesync Auxiliary Control register */
fp@2685: #define E1000_TRGTTIML0 0x0B644 /* Target Time Register 0 Low - RW */
fp@2685: #define E1000_TRGTTIMH0 0x0B648 /* Target Time Register 0 High - RW */
fp@2685: #define E1000_TRGTTIML1 0x0B64C /* Target Time Register 1 Low - RW */
fp@2685: #define E1000_TRGTTIMH1 0x0B650 /* Target Time Register 1 High - RW */
fp@2685: #define E1000_AUXSTMPL0 0x0B65C /* Auxiliary Time Stamp 0 Register Low - RO */
fp@2685: #define E1000_AUXSTMPH0 0x0B660 /* Auxiliary Time Stamp 0 Register High - RO */
fp@2685: #define E1000_AUXSTMPL1 0x0B664 /* Auxiliary Time Stamp 1 Register Low - RO */
fp@2685: #define E1000_AUXSTMPH1 0x0B668 /* Auxiliary Time Stamp 1 Register High - RO */
fp@2685: #define E1000_SYSTIMR 0x0B6F8 /* System time register Residue */
fp@2685: #define E1000_TSICR 0x0B66C /* Interrupt Cause Register */
fp@2685: #define E1000_TSIM 0x0B674 /* Interrupt Mask Register */
fp@2685:
fp@2685: /* Filtering Registers */
fp@2685: #define E1000_SAQF(_n) (0x5980 + 4 * (_n))
fp@2685: #define E1000_DAQF(_n) (0x59A0 + 4 * (_n))
fp@2685: #define E1000_SPQF(_n) (0x59C0 + 4 * (_n))
fp@2685: #define E1000_FTQF(_n) (0x59E0 + 4 * (_n))
fp@2685: #define E1000_SAQF0 E1000_SAQF(0)
fp@2685: #define E1000_DAQF0 E1000_DAQF(0)
fp@2685: #define E1000_SPQF0 E1000_SPQF(0)
fp@2685: #define E1000_FTQF0 E1000_FTQF(0)
fp@2685: #define E1000_SYNQF(_n) (0x055FC + (4 * (_n))) /* SYN Packet Queue Fltr */
fp@2685: #define E1000_ETQF(_n) (0x05CB0 + (4 * (_n))) /* EType Queue Fltr */
fp@2685:
fp@2685: #define E1000_RQDPC(_n) (0x0C030 + ((_n) * 0x40))
fp@2685:
fp@2685: /* DMA Coalescing registers */
fp@2685: #define E1000_DMACR 0x02508 /* Control Register */
fp@2685: #define E1000_DMCTXTH 0x03550 /* Transmit Threshold */
fp@2685: #define E1000_DMCTLX 0x02514 /* Time to Lx Request */
fp@2685: #define E1000_DMCRTRH 0x05DD0 /* Receive Packet Rate Threshold */
fp@2685: #define E1000_DMCCNT 0x05DD4 /* Current Rx Count */
fp@2685: #define E1000_FCRTC 0x02170 /* Flow Control Rx high watermark */
fp@2685: #define E1000_PCIEMISC 0x05BB8 /* PCIE misc config register */
fp@2685:
fp@2685: /* TX Rate Limit Registers */
fp@2685: #define E1000_RTTDQSEL 0x3604 /* Tx Desc Plane Queue Select - WO */
fp@2685: #define E1000_RTTBCNRM 0x3690 /* Tx BCN Rate-scheduler MMW */
fp@2685: #define E1000_RTTBCNRC 0x36B0 /* Tx BCN Rate-Scheduler Config - WO */
fp@2685:
fp@2685: /* Split and Replication RX Control - RW */
fp@2685: #define E1000_RXPBS 0x02404 /* Rx Packet Buffer Size - RW */
fp@2685:
fp@2685: /* Thermal sensor configuration and status registers */
fp@2685: #define E1000_THMJT 0x08100 /* Junction Temperature */
fp@2685: #define E1000_THLOWTC 0x08104 /* Low Threshold Control */
fp@2685: #define E1000_THMIDTC 0x08108 /* Mid Threshold Control */
fp@2685: #define E1000_THHIGHTC 0x0810C /* High Threshold Control */
fp@2685: #define E1000_THSTAT 0x08110 /* Thermal Sensor Status */
fp@2685:
fp@2685: /* Convenience macros
fp@2685: *
fp@2685: * Note: "_n" is the queue number of the register to be written to.
fp@2685: *
fp@2685: * Example usage:
fp@2685: * E1000_RDBAL_REG(current_rx_queue)
fp@2685: */
fp@2685: #define E1000_RDBAL(_n) ((_n) < 4 ? (0x02800 + ((_n) * 0x100)) \
fp@2685: : (0x0C000 + ((_n) * 0x40)))
fp@2685: #define E1000_RDBAH(_n) ((_n) < 4 ? (0x02804 + ((_n) * 0x100)) \
fp@2685: : (0x0C004 + ((_n) * 0x40)))
fp@2685: #define E1000_RDLEN(_n) ((_n) < 4 ? (0x02808 + ((_n) * 0x100)) \
fp@2685: : (0x0C008 + ((_n) * 0x40)))
fp@2685: #define E1000_SRRCTL(_n) ((_n) < 4 ? (0x0280C + ((_n) * 0x100)) \
fp@2685: : (0x0C00C + ((_n) * 0x40)))
fp@2685: #define E1000_RDH(_n) ((_n) < 4 ? (0x02810 + ((_n) * 0x100)) \
fp@2685: : (0x0C010 + ((_n) * 0x40)))
fp@2685: #define E1000_RDT(_n) ((_n) < 4 ? (0x02818 + ((_n) * 0x100)) \
fp@2685: : (0x0C018 + ((_n) * 0x40)))
fp@2685: #define E1000_RXDCTL(_n) ((_n) < 4 ? (0x02828 + ((_n) * 0x100)) \
fp@2685: : (0x0C028 + ((_n) * 0x40)))
fp@2685: #define E1000_TDBAL(_n) ((_n) < 4 ? (0x03800 + ((_n) * 0x100)) \
fp@2685: : (0x0E000 + ((_n) * 0x40)))
fp@2685: #define E1000_TDBAH(_n) ((_n) < 4 ? (0x03804 + ((_n) * 0x100)) \
fp@2685: : (0x0E004 + ((_n) * 0x40)))
fp@2685: #define E1000_TDLEN(_n) ((_n) < 4 ? (0x03808 + ((_n) * 0x100)) \
fp@2685: : (0x0E008 + ((_n) * 0x40)))
fp@2685: #define E1000_TDH(_n) ((_n) < 4 ? (0x03810 + ((_n) * 0x100)) \
fp@2685: : (0x0E010 + ((_n) * 0x40)))
fp@2685: #define E1000_TDT(_n) ((_n) < 4 ? (0x03818 + ((_n) * 0x100)) \
fp@2685: : (0x0E018 + ((_n) * 0x40)))
fp@2685: #define E1000_TXDCTL(_n) ((_n) < 4 ? (0x03828 + ((_n) * 0x100)) \
fp@2685: : (0x0E028 + ((_n) * 0x40)))
fp@2685: #define E1000_RXCTL(_n) ((_n) < 4 ? (0x02814 + ((_n) * 0x100)) : \
fp@2685: (0x0C014 + ((_n) * 0x40)))
fp@2685: #define E1000_DCA_RXCTRL(_n) E1000_RXCTL(_n)
fp@2685: #define E1000_TXCTL(_n) ((_n) < 4 ? (0x03814 + ((_n) * 0x100)) : \
fp@2685: (0x0E014 + ((_n) * 0x40)))
fp@2685: #define E1000_DCA_TXCTRL(_n) E1000_TXCTL(_n)
fp@2685: #define E1000_TDWBAL(_n) ((_n) < 4 ? (0x03838 + ((_n) * 0x100)) \
fp@2685: : (0x0E038 + ((_n) * 0x40)))
fp@2685: #define E1000_TDWBAH(_n) ((_n) < 4 ? (0x0383C + ((_n) * 0x100)) \
fp@2685: : (0x0E03C + ((_n) * 0x40)))
fp@2685:
fp@2685: #define E1000_RXPBS 0x02404 /* Rx Packet Buffer Size - RW */
fp@2685: #define E1000_TXPBS 0x03404 /* Tx Packet Buffer Size - RW */
fp@2685:
fp@2685: #define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */
fp@2685: #define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */
fp@2685: #define E1000_TDFHS 0x03420 /* TX Data FIFO Head Saved - RW */
fp@2685: #define E1000_TDFPC 0x03430 /* TX Data FIFO Packet Count - RW */
fp@2685: #define E1000_DTXCTL 0x03590 /* DMA TX Control - RW */
fp@2685: #define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */
fp@2685: #define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */
fp@2685: #define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */
fp@2685: #define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */
fp@2685: #define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */
fp@2685: #define E1000_SCC 0x04014 /* Single Collision Count - R/clr */
fp@2685: #define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */
fp@2685: #define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */
fp@2685: #define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */
fp@2685: #define E1000_COLC 0x04028 /* Collision Count - R/clr */
fp@2685: #define E1000_DC 0x04030 /* Defer Count - R/clr */
fp@2685: #define E1000_TNCRS 0x04034 /* TX-No CRS - R/clr */
fp@2685: #define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */
fp@2685: #define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */
fp@2685: #define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */
fp@2685: #define E1000_XONRXC 0x04048 /* XON RX Count - R/clr */
fp@2685: #define E1000_XONTXC 0x0404C /* XON TX Count - R/clr */
fp@2685: #define E1000_XOFFRXC 0x04050 /* XOFF RX Count - R/clr */
fp@2685: #define E1000_XOFFTXC 0x04054 /* XOFF TX Count - R/clr */
fp@2685: #define E1000_FCRUC 0x04058 /* Flow Control RX Unsupported Count- R/clr */
fp@2685: #define E1000_PRC64 0x0405C /* Packets RX (64 bytes) - R/clr */
fp@2685: #define E1000_PRC127 0x04060 /* Packets RX (65-127 bytes) - R/clr */
fp@2685: #define E1000_PRC255 0x04064 /* Packets RX (128-255 bytes) - R/clr */
fp@2685: #define E1000_PRC511 0x04068 /* Packets RX (255-511 bytes) - R/clr */
fp@2685: #define E1000_PRC1023 0x0406C /* Packets RX (512-1023 bytes) - R/clr */
fp@2685: #define E1000_PRC1522 0x04070 /* Packets RX (1024-1522 bytes) - R/clr */
fp@2685: #define E1000_GPRC 0x04074 /* Good Packets RX Count - R/clr */
fp@2685: #define E1000_BPRC 0x04078 /* Broadcast Packets RX Count - R/clr */
fp@2685: #define E1000_MPRC 0x0407C /* Multicast Packets RX Count - R/clr */
fp@2685: #define E1000_GPTC 0x04080 /* Good Packets TX Count - R/clr */
fp@2685: #define E1000_GORCL 0x04088 /* Good Octets RX Count Low - R/clr */
fp@2685: #define E1000_GORCH 0x0408C /* Good Octets RX Count High - R/clr */
fp@2685: #define E1000_GOTCL 0x04090 /* Good Octets TX Count Low - R/clr */
fp@2685: #define E1000_GOTCH 0x04094 /* Good Octets TX Count High - R/clr */
fp@2685: #define E1000_RNBC 0x040A0 /* RX No Buffers Count - R/clr */
fp@2685: #define E1000_RUC 0x040A4 /* RX Undersize Count - R/clr */
fp@2685: #define E1000_RFC 0x040A8 /* RX Fragment Count - R/clr */
fp@2685: #define E1000_ROC 0x040AC /* RX Oversize Count - R/clr */
fp@2685: #define E1000_RJC 0x040B0 /* RX Jabber Count - R/clr */
fp@2685: #define E1000_MGTPRC 0x040B4 /* Management Packets RX Count - R/clr */
fp@2685: #define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */
fp@2685: #define E1000_MGTPTC 0x040BC /* Management Packets TX Count - R/clr */
fp@2685: #define E1000_TORL 0x040C0 /* Total Octets RX Low - R/clr */
fp@2685: #define E1000_TORH 0x040C4 /* Total Octets RX High - R/clr */
fp@2685: #define E1000_TOTL 0x040C8 /* Total Octets TX Low - R/clr */
fp@2685: #define E1000_TOTH 0x040CC /* Total Octets TX High - R/clr */
fp@2685: #define E1000_TPR 0x040D0 /* Total Packets RX - R/clr */
fp@2685: #define E1000_TPT 0x040D4 /* Total Packets TX - R/clr */
fp@2685: #define E1000_PTC64 0x040D8 /* Packets TX (64 bytes) - R/clr */
fp@2685: #define E1000_PTC127 0x040DC /* Packets TX (65-127 bytes) - R/clr */
fp@2685: #define E1000_PTC255 0x040E0 /* Packets TX (128-255 bytes) - R/clr */
fp@2685: #define E1000_PTC511 0x040E4 /* Packets TX (256-511 bytes) - R/clr */
fp@2685: #define E1000_PTC1023 0x040E8 /* Packets TX (512-1023 bytes) - R/clr */
fp@2685: #define E1000_PTC1522 0x040EC /* Packets TX (1024-1522 Bytes) - R/clr */
fp@2685: #define E1000_MPTC 0x040F0 /* Multicast Packets TX Count - R/clr */
fp@2685: #define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */
fp@2685: #define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */
fp@2685: #define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */
fp@2685: #define E1000_IAC 0x04100 /* Interrupt Assertion Count */
fp@2685: /* Interrupt Cause Rx Packet Timer Expire Count */
fp@2685: #define E1000_ICRXPTC 0x04104
fp@2685: /* Interrupt Cause Rx Absolute Timer Expire Count */
fp@2685: #define E1000_ICRXATC 0x04108
fp@2685: /* Interrupt Cause Tx Packet Timer Expire Count */
fp@2685: #define E1000_ICTXPTC 0x0410C
fp@2685: /* Interrupt Cause Tx Absolute Timer Expire Count */
fp@2685: #define E1000_ICTXATC 0x04110
fp@2685: /* Interrupt Cause Tx Queue Empty Count */
fp@2685: #define E1000_ICTXQEC 0x04118
fp@2685: /* Interrupt Cause Tx Queue Minimum Threshold Count */
fp@2685: #define E1000_ICTXQMTC 0x0411C
fp@2685: /* Interrupt Cause Rx Descriptor Minimum Threshold Count */
fp@2685: #define E1000_ICRXDMTC 0x04120
fp@2685: #define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */
fp@2685: #define E1000_PCS_CFG0 0x04200 /* PCS Configuration 0 - RW */
fp@2685: #define E1000_PCS_LCTL 0x04208 /* PCS Link Control - RW */
fp@2685: #define E1000_PCS_LSTAT 0x0420C /* PCS Link Status - RO */
fp@2685: #define E1000_CBTMPC 0x0402C /* Circuit Breaker TX Packet Count */
fp@2685: #define E1000_HTDPMC 0x0403C /* Host Transmit Discarded Packets */
fp@2685: #define E1000_CBRMPC 0x040FC /* Circuit Breaker RX Packet Count */
fp@2685: #define E1000_RPTHC 0x04104 /* Rx Packets To Host */
fp@2685: #define E1000_HGPTC 0x04118 /* Host Good Packets TX Count */
fp@2685: #define E1000_HTCBDPC 0x04124 /* Host TX Circuit Breaker Dropped Count */
fp@2685: #define E1000_HGORCL 0x04128 /* Host Good Octets Received Count Low */
fp@2685: #define E1000_HGORCH 0x0412C /* Host Good Octets Received Count High */
fp@2685: #define E1000_HGOTCL 0x04130 /* Host Good Octets Transmit Count Low */
fp@2685: #define E1000_HGOTCH 0x04134 /* Host Good Octets Transmit Count High */
fp@2685: #define E1000_LENERRS 0x04138 /* Length Errors Count */
fp@2685: #define E1000_SCVPC 0x04228 /* SerDes/SGMII Code Violation Pkt Count */
fp@2685: #define E1000_PCS_ANADV 0x04218 /* AN advertisement - RW */
fp@2685: #define E1000_PCS_LPAB 0x0421C /* Link Partner Ability - RW */
fp@2685: #define E1000_PCS_NPTX 0x04220 /* AN Next Page Transmit - RW */
fp@2685: #define E1000_PCS_LPABNP 0x04224 /* Link Partner Ability Next Page - RW */
fp@2685: #define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */
fp@2685: #define E1000_RLPML 0x05004 /* RX Long Packet Max Length */
fp@2685: #define E1000_RFCTL 0x05008 /* Receive Filter Control*/
fp@2685: #define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */
fp@2685: #define E1000_RA 0x05400 /* Receive Address - RW Array */
fp@2685: #define E1000_RA2 0x054E0 /* 2nd half of Rx address array - RW Array */
fp@2685: #define E1000_PSRTYPE(_i) (0x05480 + ((_i) * 4))
fp@2685: #define E1000_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \
fp@2685: (0x054E0 + ((_i - 16) * 8)))
fp@2685: #define E1000_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \
fp@2685: (0x054E4 + ((_i - 16) * 8)))
fp@2685: #define E1000_IP4AT_REG(_i) (0x05840 + ((_i) * 8))
fp@2685: #define E1000_IP6AT_REG(_i) (0x05880 + ((_i) * 4))
fp@2685: #define E1000_WUPM_REG(_i) (0x05A00 + ((_i) * 4))
fp@2685: #define E1000_FFMT_REG(_i) (0x09000 + ((_i) * 8))
fp@2685: #define E1000_FFVT_REG(_i) (0x09800 + ((_i) * 8))
fp@2685: #define E1000_FFLT_REG(_i) (0x05F00 + ((_i) * 8))
fp@2685: #define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */
fp@2685: #define E1000_VT_CTL 0x0581C /* VMDq Control - RW */
fp@2685: #define E1000_WUC 0x05800 /* Wakeup Control - RW */
fp@2685: #define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */
fp@2685: #define E1000_WUS 0x05810 /* Wakeup Status - RO */
fp@2685: #define E1000_MANC 0x05820 /* Management Control - RW */
fp@2685: #define E1000_IPAV 0x05838 /* IP Address Valid - RW */
fp@2685: #define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */
fp@2685:
fp@2685: #define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */
fp@2685: #define E1000_CCMCTL 0x05B48 /* CCM Control Register */
fp@2685: #define E1000_GIOCTL 0x05B44 /* GIO Analog Control Register */
fp@2685: #define E1000_SCCTL 0x05B4C /* PCIc PLL Configuration Register */
fp@2685: #define E1000_GCR 0x05B00 /* PCI-Ex Control */
fp@2685: #define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */
fp@2685: #define E1000_SWSM 0x05B50 /* SW Semaphore */
fp@2685: #define E1000_FWSM 0x05B54 /* FW Semaphore */
fp@2685: #define E1000_DCA_CTRL 0x05B74 /* DCA Control - RW */
fp@2685:
fp@2685: /* RSS registers */
fp@2685: #define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */
fp@2685: #define E1000_IMIR(_i) (0x05A80 + ((_i) * 4)) /* Immediate Interrupt */
fp@2685: #define E1000_IMIREXT(_i) (0x05AA0 + ((_i) * 4)) /* Immediate Interrupt Ext*/
fp@2685: #define E1000_IMIRVP 0x05AC0 /* Immediate Interrupt RX VLAN Priority - RW */
fp@2685: /* MSI-X Allocation Register (_i) - RW */
fp@2685: #define E1000_MSIXBM(_i) (0x01600 + ((_i) * 4))
fp@2685: /* Redirection Table - RW Array */
fp@2685: #define E1000_RETA(_i) (0x05C00 + ((_i) * 4))
fp@2685: #define E1000_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* RSS Random Key - RW Array */
fp@2685:
fp@2685: /* VT Registers */
fp@2685: #define E1000_MBVFICR 0x00C80 /* Mailbox VF Cause - RWC */
fp@2685: #define E1000_MBVFIMR 0x00C84 /* Mailbox VF int Mask - RW */
fp@2685: #define E1000_VFLRE 0x00C88 /* VF Register Events - RWC */
fp@2685: #define E1000_VFRE 0x00C8C /* VF Receive Enables */
fp@2685: #define E1000_VFTE 0x00C90 /* VF Transmit Enables */
fp@2685: #define E1000_QDE 0x02408 /* Queue Drop Enable - RW */
fp@2685: #define E1000_DTXSWC 0x03500 /* DMA Tx Switch Control - RW */
fp@2685: #define E1000_WVBR 0x03554 /* VM Wrong Behavior - RWS */
fp@2685: #define E1000_RPLOLR 0x05AF0 /* Replication Offload - RW */
fp@2685: #define E1000_UTA 0x0A000 /* Unicast Table Array - RW */
fp@2685: #define E1000_IOVTCL 0x05BBC /* IOV Control Register */
fp@2685: #define E1000_TXSWC 0x05ACC /* Tx Switch Control */
fp@2685: #define E1000_LVMMC 0x03548 /* Last VM Misbehavior cause */
fp@2685: /* These act per VF so an array friendly macro is used */
fp@2685: #define E1000_P2VMAILBOX(_n) (0x00C00 + (4 * (_n)))
fp@2685: #define E1000_VMBMEM(_n) (0x00800 + (64 * (_n)))
fp@2685: #define E1000_VMOLR(_n) (0x05AD0 + (4 * (_n)))
fp@2685: #define E1000_DVMOLR(_n) (0x0C038 + (64 * (_n)))
fp@2685: #define E1000_VLVF(_n) (0x05D00 + (4 * (_n))) /* VLAN VM Filter */
fp@2685: #define E1000_VMVIR(_n) (0x03700 + (4 * (_n)))
fp@2685:
fp@2685: struct e1000_hw;
fp@2685:
fp@2685: u32 igb_rd32(struct e1000_hw *hw, u32 reg);
fp@2685:
fp@2685: /* write operations, indexed using DWORDS */
fp@2685: #define wr32(reg, val) \
fp@2685: do { \
fp@2685: u8 __iomem *hw_addr = ACCESS_ONCE((hw)->hw_addr); \
fp@2685: if (!E1000_REMOVED(hw_addr)) \
fp@2685: writel((val), &hw_addr[(reg)]); \
fp@2685: } while (0)
fp@2685:
fp@2685: #define rd32(reg) (igb_rd32(hw, reg))
fp@2685:
fp@2685: #define wrfl() ((void)rd32(E1000_STATUS))
fp@2685:
fp@2685: #define array_wr32(reg, offset, value) \
fp@2685: wr32((reg) + ((offset) << 2), (value))
fp@2685:
fp@2685: #define array_rd32(reg, offset) \
fp@2685: (readl(hw->hw_addr + reg + ((offset) << 2)))
fp@2685:
fp@2685: /* DMA Coalescing registers */
fp@2685: #define E1000_PCIEMISC 0x05BB8 /* PCIE misc config register */
fp@2685:
fp@2685: /* Energy Efficient Ethernet "EEE" register */
fp@2685: #define E1000_IPCNFG 0x0E38 /* Internal PHY Configuration */
fp@2685: #define E1000_EEER 0x0E30 /* Energy Efficient Ethernet */
fp@2685: #define E1000_EEE_SU 0X0E34 /* EEE Setup */
fp@2685: #define E1000_EMIADD 0x10 /* Extended Memory Indirect Address */
fp@2685: #define E1000_EMIDATA 0x11 /* Extended Memory Indirect Data */
fp@2685: #define E1000_MMDAC 13 /* MMD Access Control */
fp@2685: #define E1000_MMDAAD 14 /* MMD Access Address/Data */
fp@2685:
fp@2685: /* Thermal Sensor Register */
fp@2685: #define E1000_THSTAT 0x08110 /* Thermal Sensor Status */
fp@2685:
fp@2685: /* OS2BMC Registers */
fp@2685: #define E1000_B2OSPC 0x08FE0 /* BMC2OS packets sent by BMC */
fp@2685: #define E1000_B2OGPRC 0x04158 /* BMC2OS packets received by host */
fp@2685: #define E1000_O2BGPTC 0x08FE4 /* OS2BMC packets received by BMC */
fp@2685: #define E1000_O2BSPC 0x0415C /* OS2BMC packets transmitted by host */
fp@2685:
fp@2685: #define E1000_SRWR 0x12018 /* Shadow Ram Write Register - RW */
fp@2685: #define E1000_I210_FLMNGCTL 0x12038
fp@2685: #define E1000_I210_FLMNGDATA 0x1203C
fp@2685: #define E1000_I210_FLMNGCNT 0x12040
fp@2685:
fp@2685: #define E1000_I210_FLSWCTL 0x12048
fp@2685: #define E1000_I210_FLSWDATA 0x1204C
fp@2685: #define E1000_I210_FLSWCNT 0x12050
fp@2685:
fp@2685: #define E1000_I210_FLA 0x1201C
fp@2685:
fp@2685: #define E1000_INVM_DATA_REG(_n) (0x12120 + 4*(_n))
fp@2685: #define E1000_INVM_SIZE 64 /* Number of INVM Data Registers */
fp@2685:
fp@2685: #define E1000_REMOVED(h) unlikely(!(h))
fp@2685:
fp@2685: #endif