Florian Pose <fp@igh-essen.com> [Wed, 25 Jul 2007 12:52:06 +0000] rev 670
Replaced ecdev_link_state() with ecdev_set_link(); added
ecdev_get_link().
Florian Pose <fp@igh-essen.com> [Wed, 25 Jul 2007 07:46:09 +0000] rev 669
Updated TODO and NEWS.
Florian Pose <fp@igh-essen.com> [Tue, 17 Jul 2007 18:47:12 +0000] rev 668
Advanced e1000 modifications.
Florian Pose <fp@igh-essen.com> [Fri, 13 Jul 2007 15:18:37 +0000] rev 667
First version with e1000 driver (to be continued...)
Florian Pose <fp@igh-essen.com> [Fri, 08 Jun 2007 12:03:20 +0000] rev 666
Improved dummy module.
Florian Pose <fp@igh-essen.com> [Wed, 06 Jun 2007 17:02:38 +0000] rev 665
Added dummy module for simulation purposes.
Florian Pose <fp@igh-essen.com> [Thu, 03 May 2007 14:29:21 +0000] rev 664
Introduced frames_timed_out flag to notice bus failure when link down is
not detected.
Florian Pose <fp@igh-essen.com> [Fri, 16 Mar 2007 14:42:04 +0000] rev 663
Completely lock master while an EoE cycle is executing.
Florian Pose <fp@igh-essen.com> [Fri, 16 Mar 2007 14:02:21 +0000] rev 662
Version 1.3.0-rc1.
Florian Pose <fp@igh-essen.com> [Fri, 16 Mar 2007 14:00:12 +0000] rev 661
Dynamic creation of EoE handlers.
Florian Pose <fp@igh-essen.com> [Fri, 16 Mar 2007 13:39:19 +0000] rev 660
Configure alternative PDO mapping only on slaves that have PDO sync
managers.
Florian Pose <fp@igh-essen.com> [Fri, 16 Mar 2007 11:23:08 +0000] rev 659
Removed unecessary clearing of EoE handlers in master init function;
fixed possible bug on failing to initialize or add master kobject.
Florian Pose <fp@igh-essen.com> [Fri, 16 Mar 2007 11:06:40 +0000] rev 658
Updated TODO.
Florian Pose <fp@igh-essen.com> [Fri, 16 Mar 2007 11:04:50 +0000] rev 657
Respected endianess in sysfs SDO output; Separate message, if data type
does not fit to bit length.
Florian Pose <fp@igh-essen.com> [Mon, 12 Mar 2007 18:21:42 +0000] rev 656
Slave configuration exclusively from master thread; removed
ec_master_sync_io(); introduced events in the master state machine;
locking of slave scanning and slave configuration through allow_scan
and allow_config flags.
Florian Pose <fp@igh-essen.com> [Mon, 12 Mar 2007 18:15:06 +0000] rev 655
Merged changes of examples/mini/mini.c -r858:859 to
examples/rtai/rtai_sample.c.
Florian Pose <fp@igh-essen.com> [Mon, 12 Mar 2007 18:12:30 +0000] rev 654
Minor changes in minimal example.
Florian Pose <fp@igh-essen.com> [Mon, 12 Mar 2007 16:40:23 +0000] rev 653
Fixed missing semaphore initialization.
Florian Pose <fp@igh-essen.com> [Mon, 12 Mar 2007 13:59:23 +0000] rev 652
Added scan time output.
Florian Pose <fp@igh-essen.com> [Mon, 12 Mar 2007 13:59:06 +0000] rev 651
Fixed skipped datagrams when not in FSM idle phase.
Florian Pose <fp@igh-essen.com> [Mon, 12 Mar 2007 12:11:43 +0000] rev 650
Introduced idle flag in master state machine.
Florian Pose <fp@igh-essen.com> [Mon, 12 Mar 2007 11:02:05 +0000] rev 649
Renamed names of enum type ec_request_state_t.
Florian Pose <fp@igh-essen.com> [Mon, 12 Mar 2007 08:47:56 +0000] rev 648
Made waiting for device semaphore uninterruptible.
Florian Pose <fp@igh-essen.com> [Mon, 12 Mar 2007 08:42:02 +0000] rev 647
Replaced master variable 'atomic_t available' by integer and used
semaphore in module.c instead.
Florian Pose <fp@igh-essen.com> [Fri, 09 Mar 2007 15:11:29 +0000] rev 646
Implemented SDO reading with wait queues.
Florian Pose <fp@igh-essen.com> [Fri, 09 Mar 2007 14:00:32 +0000] rev 645
Renamed ec_eeprom_request_state_t enum to ec_request_state_t and made it
global.
Florian Pose <fp@igh-essen.com> [Fri, 09 Mar 2007 13:44:46 +0000] rev 644
Updated TODO.
Florian Pose <fp@igh-essen.com> [Fri, 09 Mar 2007 13:24:15 +0000] rev 643
Removed X:Y addressing scheme, ec_slave_is_coupler(),
ec_master_calc_addressing(), coupler_index and coupler_subindex variables.
Adapted lsec script and examples.
Florian Pose <fp@igh-essen.com> [Fri, 09 Mar 2007 13:16:12 +0000] rev 642
Correctted resetting topology_change_pending and tainted flags.
Florian Pose <fp@igh-essen.com> [Fri, 09 Mar 2007 10:32:25 +0000] rev 641
Adjusted minimal example to interface changes.
Florian Pose <fp@igh-essen.com> [Fri, 09 Mar 2007 10:24:50 +0000] rev 640
Added parameters for vendor ID and product code to ecrt_get_slave(); PDO
registration functions now take a slave pointer as argument; changed
values for ec_bus_status_t.
Florian Pose <fp@igh-essen.com> [Thu, 08 Mar 2007 18:15:25 +0000] rev 639
Allow only MAC addresses as device identifiers; replaced master list by
master array; hand ober MAC addresses with array module parameters.
Florian Pose <fp@igh-essen.com> [Thu, 08 Mar 2007 13:06:20 +0000] rev 638
Updated NEWS and TODO.
Florian Pose <fp@igh-essen.com> [Thu, 08 Mar 2007 13:02:42 +0000] rev 637
Removed ecrt_master_run(), removed datagram queueing from state
machines, added datagram injection, two different master thread
functions.
Florian Pose <fp@igh-essen.com> [Thu, 08 Mar 2007 08:10:32 +0000] rev 636
Updated TODO.
Florian Pose <fp@igh-essen.com> [Wed, 07 Mar 2007 17:37:21 +0000] rev 635
Implemented alternative PDO mapping configuration interface.
Florian Pose <fp@igh-essen.com> [Wed, 07 Mar 2007 17:27:25 +0000] rev 634
Updated TODO.
Florian Pose <fp@igh-essen.com> [Wed, 07 Mar 2007 16:20:20 +0000] rev 633
Updated TODO.
Florian Pose <fp@igh-essen.com> [Wed, 07 Mar 2007 15:29:02 +0000] rev 632
Fixed sync manager freeing bug coming up in r833.
Florian Pose <fp@igh-essen.com> [Wed, 07 Mar 2007 13:56:00 +0000] rev 631
Removed obsolete ec_slave_sync_config().
Florian Pose <fp@igh-essen.com> [Wed, 07 Mar 2007 13:29:29 +0000] rev 630
Layed out FMMU structure and methods to own files.
Florian Pose <fp@igh-essen.com> [Wed, 07 Mar 2007 13:12:33 +0000] rev 629
Moved a few constants to the files they are needed in.
Florian Pose <fp@igh-essen.com> [Wed, 07 Mar 2007 13:06:40 +0000] rev 628
Layed out sync manager structures and methods into own files.
Florian Pose <fp@igh-essen.com> [Wed, 07 Mar 2007 11:46:02 +0000] rev 627
Layed out PDO structures to own files.
Florian Pose <fp@igh-essen.com> [Wed, 07 Mar 2007 11:30:09 +0000] rev 626
Renamed ec_sii_sync_t to ec_sync_t.
Florian Pose <fp@igh-essen.com> [Wed, 07 Mar 2007 11:18:34 +0000] rev 625
Renamed ec_sii_pdo_t and ec_sii_pdo_entry_t to ec_pdo_t and
ec_pdo_entry_t, respectively.
Florian Pose <fp@igh-essen.com> [Wed, 07 Mar 2007 11:11:17 +0000] rev 624
Simplified handling of EEPROM strings.
Florian Pose <fp@igh-essen.com> [Tue, 06 Mar 2007 15:11:44 +0000] rev 623
Renamed slave configuration states "sync" to "mbox_sync" and "sync2" to
"pdo_sync".
Florian Pose <fp@igh-essen.com> [Tue, 06 Mar 2007 15:07:13 +0000] rev 622
Changed order of slave conf FSM in graph.
Florian Pose <fp@igh-essen.com> [Tue, 06 Mar 2007 14:48:50 +0000] rev 621
Improved slave configuration FSM graph.
Florian Pose <fp@igh-essen.com> [Tue, 06 Mar 2007 10:37:56 +0000] rev 620
Renamed SII fetching functions (non-functional).
Florian Pose <fp@igh-essen.com> [Tue, 06 Mar 2007 09:15:12 +0000] rev 619
Introduced ec_slave_get_pdo_sync().
Florian Pose <fp@igh-essen.com> [Tue, 06 Mar 2007 09:06:01 +0000] rev 618
SII sync managers as array instead of list, removed sync manager
guessing, ignoring base_sync_count.
Florian Pose <fp@igh-essen.com> [Mon, 05 Mar 2007 16:59:02 +0000] rev 617
Improved mapping FSM graph.
Florian Pose <fp@igh-essen.com> [Mon, 05 Mar 2007 15:50:30 +0000] rev 616
Added PDO mapping FSM graph.
Florian Pose <fp@igh-essen.com> [Mon, 05 Mar 2007 14:59:23 +0000] rev 615
Removed unnecessary edge in slave configuration FSM graph.
Florian Pose <fp@igh-essen.com> [Mon, 05 Mar 2007 14:51:53 +0000] rev 614
Added DOT graph for slave configuration FSM.
Florian Pose <fp@igh-essen.com> [Mon, 05 Mar 2007 11:34:52 +0000] rev 613
Removed ugly ec_slave_has_subbus() function.
Florian Pose <fp@igh-essen.com> [Mon, 05 Mar 2007 10:35:50 +0000] rev 612
Introduced master status, ecrt_master_get_status(), tainted flag,
pdos_registered flags and pdo_slaves_offline counter.
Florian Pose <fp@igh-essen.com> [Mon, 05 Mar 2007 10:00:18 +0000] rev 611
Corrected type of online_state.
Florian Pose <fp@igh-essen.com> [Mon, 05 Mar 2007 09:55:39 +0000] rev 610
Introduced ec_slave_online_state_t, ec_slave_set_online_state(), renamed
slave->online to ec_online_state and introduced
ec_slave_set_app_state().
Florian Pose <fp@igh-essen.com> [Mon, 05 Mar 2007 09:10:02 +0000] rev 609
Moved state request on PDO registration to slave.c.
Florian Pose <fp@igh-essen.com> [Sun, 04 Mar 2007 16:15:23 +0000] rev 608
Updated TODO.
Florian Pose <fp@igh-essen.com> [Fri, 02 Mar 2007 15:43:45 +0000] rev 607
Implemented alias reading/writing via sysfs.
Florian Pose <fp@igh-essen.com> [Fri, 02 Mar 2007 14:47:09 +0000] rev 606
Minor changes in EEPROM write code.
Florian Pose <fp@igh-essen.com> [Fri, 02 Mar 2007 14:35:49 +0000] rev 605
Fixed signal issue in EEPROM writing code.
Florian Pose <fp@igh-essen.com> [Fri, 02 Mar 2007 08:45:21 +0000] rev 604
Fixed possible race with next request pointer again.
Florian Pose <fp@igh-essen.com> [Fri, 02 Mar 2007 07:45:00 +0000] rev 603
Fixed possible bug in master FSM concerning unqueueing of EEPROM write
requests.
Florian Pose <fp@igh-essen.com> [Fri, 02 Mar 2007 07:37:34 +0000] rev 602
Updated TODO.
Florian Pose <fp@igh-essen.com> [Thu, 01 Mar 2007 21:34:10 +0000] rev 601
Introduced EEPROM write requests: EEPROM write operations from user
space are now queued and block until completion. Also, appropriate error
codes are returned.
Florian Pose <fp@igh-essen.com> [Thu, 01 Mar 2007 21:23:07 +0000] rev 600
Made data pointer in ec_fsm_sii_write() const.
Florian Pose <fp@igh-essen.com> [Thu, 01 Mar 2007 15:03:08 +0000] rev 599
ec_slave_write_eeprom now returns certain error codes.
Florian Pose <fp@igh-essen.com> [Thu, 01 Mar 2007 14:52:17 +0000] rev 598
Updated NEWS file.
Florian Pose <fp@igh-essen.com> [Thu, 01 Mar 2007 14:50:53 +0000] rev 597
Removed eeprom_write_enable file.
Florian Pose <fp@igh-essen.com> [Wed, 28 Feb 2007 09:22:03 +0000] rev 596
Completely removed ecrt_slave_pdo_size() code.
Florian Pose <fp@igh-essen.com> [Fri, 23 Feb 2007 13:42:30 +0000] rev 595
Fixed enable8139too switch in config.kbuild.
Florian Pose <fp@igh-essen.com> [Thu, 22 Feb 2007 13:39:19 +0000] rev 594
Added datagram state to "Failed to receive..." messages.
Florian Pose <fp@igh-essen.com> [Thu, 22 Feb 2007 10:15:02 +0000] rev 593
Minor fix in 2.6.19 forcedeth driver.
Florian Pose <fp@igh-essen.com> [Thu, 22 Feb 2007 10:06:32 +0000] rev 592
Back-ported the running forcedeth driver from 2.6.19 to 2.6.17.
Florian Pose <fp@igh-essen.com> [Thu, 22 Feb 2007 09:34:32 +0000] rev 591
forcedeth device driver running fine.
Florian Pose <fp@igh-essen.com> [Thu, 22 Feb 2007 09:19:02 +0000] rev 590
Removed faulty polling before device->open().
Florian Pose <fp@igh-essen.com> [Wed, 21 Feb 2007 13:43:47 +0000] rev 589
Destroy slaves when leaving idle mode.
Florian Pose <fp@igh-essen.com> [Wed, 21 Feb 2007 13:38:02 +0000] rev 588
Introduced DEVICE_MODULES variable in sysconfig file; enabled init
script to handle serveral device modules.
Florian Pose <fp@igh-essen.com> [Wed, 21 Feb 2007 13:36:08 +0000] rev 587
Fixed installation of 8139too driver when disabled.
Florian Pose <fp@igh-essen.com> [Wed, 21 Feb 2007 12:42:20 +0000] rev 586
Made forcedeth driver compile with 2.6.19.
Florian Pose <fp@igh-essen.com> [Wed, 21 Feb 2007 12:41:25 +0000] rev 585
Fixed device Kbuild file again.
Florian Pose <fp@igh-essen.com> [Wed, 21 Feb 2007 11:47:18 +0000] rev 584
Fixed REV variable in devices Kbuild file.
Florian Pose <fp@igh-essen.com> [Wed, 21 Feb 2007 11:40:40 +0000] rev 583
Added testing version for forcedeth for 2.6.19 kernel.
Florian Pose <fp@igh-essen.com> [Wed, 21 Feb 2007 10:41:54 +0000] rev 582
Added --enable-8139too; cleaned up configure.ac and devices/Kbuild.
Florian Pose <fp@igh-essen.com> [Wed, 21 Feb 2007 10:26:19 +0000] rev 581
Added testing version of forcedeth driver.
Florian Pose <fp@igh-essen.com> [Wed, 21 Feb 2007 09:30:24 +0000] rev 580
Fixed addition of e100 driver to target objects in devices Kbuild makefile.
Florian Pose <fp@igh-essen.com> [Tue, 20 Feb 2007 17:15:43 +0000] rev 579
Made master devices persistent; added ec_device_attach() and ec_device_detach().
Florian Pose <fp@igh-essen.com> [Tue, 20 Feb 2007 13:42:44 +0000] rev 578
Removed ktype for module kobject; added backup device for master; device
connection information and IDs in master info file.
Florian Pose <fp@igh-essen.com> [Tue, 20 Feb 2007 13:40:30 +0000] rev 577
Added ec_device_id_print().
Florian Pose <fp@igh-essen.com> [Tue, 20 Feb 2007 11:28:15 +0000] rev 576
New module file /sys/ethercat, masters moved to /sys/ethercat/masterX.
Florian Pose <fp@igh-essen.com> [Tue, 20 Feb 2007 09:43:23 +0000] rev 575
Layed out device ID functionality in own files.
Florian Pose <fp@igh-essen.com> [Tue, 20 Feb 2007 09:37:57 +0000] rev 574
Minor change in device.c (removed unused header).
Florian Pose <fp@igh-essen.com> [Fri, 16 Feb 2007 17:13:39 +0000] rev 573
Introduced device IDs; removed comment lines from 8139too; removed
ec_eoeif_count parameter.
Florian Pose <fp@igh-essen.com> [Fri, 16 Feb 2007 13:30:46 +0000] rev 572
Removed ec_eoeif_count parameter from master module.
Florian Pose <fp@igh-essen.com> [Fri, 16 Feb 2007 13:23:57 +0000] rev 571
Removed XML device from master structure.
Florian Pose <fp@igh-essen.com> [Fri, 16 Feb 2007 09:52:39 +0000] rev 570
Fixed e100 installation with disabled ENABLE_E100.
Florian Pose <fp@igh-essen.com> [Thu, 15 Feb 2007 16:59:28 +0000] rev 569
Added --enable-e100 switch to configure.
Florian Pose <fp@igh-essen.com> [Wed, 14 Feb 2007 17:26:25 +0000] rev 568
First experimental version of e100 driver.
Florian Pose <fp@igh-essen.com> [Wed, 14 Feb 2007 17:24:22 +0000] rev 567
Minor changes to root Makefile.am.
Florian Pose <fp@igh-essen.com> [Wed, 14 Feb 2007 09:33:32 +0000] rev 566
Updated TODO.
Florian Pose <fp@igh-essen.com> [Tue, 13 Feb 2007 13:07:27 +0000] rev 565
Release 1.2
Florian Pose <fp@igh-essen.com> [Tue, 13 Feb 2007 13:05:25 +0000] rev 564
Updated NEWS file.
Florian Pose <fp@igh-essen.com> [Tue, 13 Feb 2007 13:01:59 +0000] rev 563
Changed structure of scripts subdirectory.
Florian Pose <fp@igh-essen.com> [Tue, 13 Feb 2007 13:00:19 +0000] rev 562
Updated AUTHORS file.
Florian Pose <fp@igh-essen.com> [Tue, 13 Feb 2007 12:59:18 +0000] rev 561
Updated README file.
Florian Pose <fp@igh-essen.com> [Tue, 13 Feb 2007 12:57:22 +0000] rev 560
Updated INSTALL file.
Florian Pose <fp@igh-essen.com> [Tue, 13 Feb 2007 12:44:11 +0000] rev 559
Do not include documentation in distribution any more.
Florian Pose <fp@igh-essen.com> [Tue, 13 Feb 2007 12:34:59 +0000] rev 558
Renamed sysconfig file to sysconfig-file.
Florian Pose <fp@igh-essen.com> [Tue, 13 Feb 2007 11:54:38 +0000] rev 557
Updated TODO.
Florian Pose <fp@igh-essen.com> [Tue, 13 Feb 2007 11:48:46 +0000] rev 556
Made ec_sync_config() and ec_fmmu_config() to methods of ec_slave_t.
Florian Pose <fp@igh-essen.com> [Tue, 13 Feb 2007 11:32:17 +0000] rev 555
Updated FEATURES file.
Florian Pose <fp@igh-essen.com> [Tue, 13 Feb 2007 11:21:23 +0000] rev 554
Updated TODO.
Florian Pose <fp@igh-essen.com> [Tue, 13 Feb 2007 10:51:40 +0000] rev 553
Introduced topology_change_pending to delay bus scanning until IDLE mode
has been reached.
Florian Pose <fp@igh-essen.com> [Mon, 12 Feb 2007 14:42:36 +0000] rev 552
Minor: Removed warning when EoE interface is up upon master unloading.
Florian Pose <fp@igh-essen.com> [Mon, 12 Feb 2007 11:16:54 +0000] rev 551
Minor: Adjusted minimal example to new testing hardware.