- Exit properly on "restart" request to init script. 2014-06-01, by Gavin Lambert
- Add generated files to mrproper rule. 2014-05-31, by Gavin Lambert
- Mark download data as const. 2014-05-31, by Gavin Lambert
- Fix for strings containing spaces. 2014-05-31, by Gavin Lambert
- Abort requests started for slave_configs that don't have any actual slaves. 2015-04-14, by Gavin Lambert
- When detaching a slave from a slave_config, fail any pending register requests instead of leaving them BUSY forever. 2015-04-14, by Gavin Lambert
- Ignore NXIO error otherwise this causes spam if network is empty or refclk not 2015-04-14, by Gavin Lambert
- Do not force the DC reference clock to OP; if it is not configured it may refuse and flood the logs. 2014-05-31, by Gavin Lambert
- Moved userspace domain unmap to deactivate instead of release, fixing memory/ref leak. 2014-05-31, by Gavin Lambert
- Add DEBUG_DATAGRAM_OVERFLOW to support ec_domain_finish datagram overflow testing 2015-04-07, by Dave Page
- Fix datagram overflow layout issue 2015-04-07, by Dave Page
- Remove unused variable 2015-04-06, by Dave Page
- overlapping PDO split datagram support 2015-04-06, by Dave Page
- overlapping PDO initial working. datagram size is not correct 2015-04-02, by Dave Page
- Refactor fmmu->logical_start_address to fmmu->logical_domain_offset 2015-03-26, by Dave Page
- Integrate skeleton of allow_overlapping_pdos from af21f0bdc7c9 2015-03-26, by Dave Page
- Reduce frequency of DC Sync debug messages 2015-03-16, by Dave Page
- Fix fsm_foe timeout regression 2014-03-05, by Dave Page
- Gavin Lambert FoE Patches 2014-01-22, by Dave Page
- FoE: Fix expected packet number when busy 2014-01-22, by Dave Page
- [etherlab-dev] [PATCH] FoE: fix read packet number check 2014-01-22, by Dave Page
- Undefined debugging. 2015-04-17, by Florian Pose
- FoE: fix state transition when busy during read. Not working. 2014-01-22, by Dave Page
- Fix spurious FoE write timeout 2013-12-16, by Dave Page
- Added --enable-loop-control to make use of the loop control registers. 2015-02-20, by Florian Pose
- Fixed bug concerning netdev_completed_queue(); thanks to B. Benner. stable-1.5 2015-02-19, by Florian Pose
- Fixed bug concerning netdev_completed_queue(); thanks to B. Benner. 2015-02-19, by Florian Pose
- Implemented EoE Set IP parameter request via command-line tool. 2014-11-12, by Florian Pose
- Removed obsolete mailbox type name and clarified documentation. 2014-11-06, by Florian Pose
- Removed obsolete SoE type name. 2014-11-06, by Florian Pose
- Removed obsolete FoE type name. 2014-11-06, by Florian Pose
- Cleaned up EoE frame type definitions. 2014-11-06, by Florian Pose
- EoE frame types. 2014-11-05, by Florian Pose
- Centrally defined mailbox types. 2014-11-05, by Florian Pose
- Made some throw methods static. 2014-11-05, by Florian Pose
- Reverted default branch to stable-1.5. 2014-11-03, by Florian Pose
- Added all drivers for kernel 3.16. stable-1.5 2014-10-28, by Florian Pose
- Added all drivers for kernel 3.14. stable-1.5 2014-10-28, by Florian Pose
- Added all drivers for kernel 3.12. stable-1.5 2014-10-28, by Florian Pose
- Added all drivers for kernel 3.10. stable-1.5 2014-10-28, by Florian Pose
- Added all drivers for kernel 3.8. stable-1.5 2014-10-28, by Florian Pose
- Fixed wrong version e1000 includes. stable-1.5 2014-10-28, by Florian Pose
- Use return value of ecdev_open(); thanks to Patrick Bruenn. stable-1.5 2014-10-27, by Florian Pose
- Ignore .dirstamp. stable-1.5 2014-10-27, by Florian Pose
- CCAT: Support kernels before 3.14 without dma_set_mask_and_coherent(). stable-1.5 2014-10-27, by Florian Pose
- Merged CCAT 0.10 changes. stable-1.5 2014-10-27, by Florian Pose
- - increase version number to 0.10 stable-1.5 2014-07-02, by Patrick Bruenn
- remove unused files CCatDefinitions.h and compat.h stable-1.5 2014-07-02, by Patrick Bruenn
- Refactoring: stable-1.5 2014-07-02, by Patrick Bruenn
- remove obsolete print.* files stable-1.5 2014-06-05, by Patrick Bruenn
- remove dead commented code stable-1.5 2014-06-05, by Patrick Bruenn
- remove print.* from release tree stable-1.5 2014-06-05, by Patrick Bruenn
- reorder functions in netdev.c to avoid forward declarations stable-1.5 2014-06-05, by Patrick Bruenn
- reorder functions in update.c to omit forward declarations stable-1.5 2014-06-05, by Patrick Bruenn
- - don't use compat.h in the mainline driver stable-1.5 2014-06-05, by Patrick Bruenn
- make ccat driver more linux compliant stable-1.5 2014-06-05, by Patrick Bruenn
- move first *_carrier_off() in front of register_netdev()/ ecdev_open() stable-1.5 2014-06-05, by Patrick Bruenn
- - use short kernel types, add empty lines after variable declaration to conform better with linux coding style stable-1.5 2014-06-05, by Patrick Bruenn
- added subdir-objects option to automake script to support automake 1.14.1 stable-1.5 2014-05-06, by Patrick Bruenn
- - restored examples/user/ stable-1.5 2014-05-06, by Patrick Bruenn
- Prevent CCAT auto-loading. stable-1.5 2014-10-27, by Florian Pose
- Output CCAT configuration. stable-1.5 2014-10-27, by Florian Pose
- merge. stable-1.5 2014-10-27, by Florian Pose
- List ccat driver in configuration files. stable-1.5 2014-04-25, by Florian Pose
- Avoid replacing ccat driver. stable-1.5 2014-04-25, by Florian Pose
- Avoided unused return value warning. stable-1.5 2014-04-25, by Florian Pose
- Removed obsolete EXTRA_DIST files. stable-1.5 2014-04-25, by Florian Pose
- Removed unused CCAT kernel version. stable-1.5 2014-04-25, by Florian Pose
- merge stable-1.5 2014-04-25, by Florian Pose
- replace symlink in example with the real file stable-1.5 2014-04-23, by Patrick Bruenn
- change back the version number to release 0.8 stable-1.5 2014-04-23, by Patrick Bruenn
- ccat: use the same file for different driver version stable-1.5 2014-04-23, by Patrick Bruenn
- added ccat support for kernel 2.6.32 stable-1.5 2014-04-23, by Patrick Bruenn
- clean up CCatDefinitions.h stable-1.5 2014-04-07, by Patrick Bruenn
- replace not working symlinks with real copies from the ccat main repository(git) stable-1.5 2014-04-04, by Patrick Bruenn
- Add ccat driver for Beckhoff CCAT communication controller in Beckhoff CX20xx device stable-1.5 2014-04-04, by Patrick Bruenn
- Added e100 driver for kernel 3.6. stable-1.5 2014-10-27, by Florian Pose
- Added r8169 driver for kernel 3.6. stable-1.5 2014-10-27, by Florian Pose
- Added e1000e driver for kernel 3.6. stable-1.5 2014-10-27, by Florian Pose
- Added e1000 driver for kernel 3.6. stable-1.5 2014-10-27, by Florian Pose
- Added 8139too driver for kernel 3.6. stable-1.5 2014-10-27, by Florian Pose
- Use absolute path fpr ldmod; thanks to S. Blanchet. stable-1.5 2014-07-08, by Florian Pose
- Fixed hex display of slave position; thanks to Henry Bausley. stable-1.5 2014-05-05, by Florian Pose
- Fixed possible NULL pointer dereference; thanks to Matthieu Bec. stable-1.5 2014-05-05, by Florian Pose
- Added --enable-kernel switch to disable kernel module building. stable-1.5 2014-03-10, by Florian Pose
- Added notes about systemd dependencies. stable-1.5 2014-02-19, by Florian Pose
- merge stable-1.5 2013-12-10, by Florian Pose
- Output datagram stats only if EC_RT_SYSLOG. stable-1.5 2013-12-04, by Florian Pose
- Device activation note. stable-1.5 2013-12-10, by Florian Pose
- Generic driver device activation in documentation. stable-1.5 2013-12-10, by Florian Pose
- Fixed request_irq() bug for non EtherCAT-devices in r8169 for kernel 3.4. stable-1.5 2013-11-29, by Florian Pose
- Improved r8169 for 3.4. stable-1.5 2013-11-26, by Florian Pose
- Added configure switch --disable-rt-syslog. stable-1.5 2013-10-21, by Florian Pose
- Reset e100 watchdog only if link up. stable-1.5 2013-10-21, by Florian Pose
- Introduced FORCE_OUTPUT_CORRUPTED. stable-1.5 2013-05-21, by Florian Pose
- Implemented emergency register requests to analyze a broken bus. stable-1.5 2013-05-13, by Florian Pose
- Fixed FoE timeout calculation bug. stable-1.5 2013-02-14, by Florian Pose
- Improved FoE debug messages. stable-1.5 2013-02-14, by Florian Pose
- Version 1.5.2. stable-1.5 2013-02-12, by Florian Pose
- Fixed missing distribution of lib/ioctl.h. stable-1.5 2013-02-12, by Florian Pose
- Some more doxygen documentation. stable-1.5 2013-02-12, by Florian Pose
- Improved API documentation. stable-1.5 2013-02-12, by Florian Pose
- Updated Doxygen documentation. stable-1.5 2013-02-12, by Florian Pose
- Removed unused prototype. stable-1.5 2013-02-12, by Florian Pose
- Added 8139too driver for kernel 3.2. stable-1.5 2013-02-12, by Florian Pose
- Added 8139too driver for kernel 3.0. stable-1.5 2013-02-12, by Florian Pose
- TTY: termios structure was included in 'struct tty' with kernel 3.7. stable-1.5 2013-02-12, by Florian Pose
- TTY ioctl() file parameter was dropped in kernel 2.6.39. stable-1.5 2013-02-12, by Florian Pose
- Replaced VM_RESERVED for kernel 3.7. stable-1.5 2013-02-12, by Florian Pose
- Documented redundancy, RTDM interface and systemd usage. stable-1.5 2013-02-08, by Florian Pose
- Release procedure. stable-1.5 2013-02-08, by Florian Pose
- Improved fon specifications in DOT graphs. stable-1.5 2013-02-08, by Florian Pose
- Directly export PDFs from DOT graphs. stable-1.5 2013-02-08, by Florian Pose
- Updated NEWS file. stable-1.5 2013-02-07, by Florian Pose
- Debug message. stable-1.5 2013-02-06, by Florian Pose
- More detailed output of configure script. stable-1.5 2013-02-06, by Florian Pose
- Introduced --enable-sii-assign. stable-1.5 2013-02-06, by Florian Pose
- Fixed annoying fprintf in ecrt_slave_config_emerg_pop(). stable-1.5 2013-02-06, by Florian Pose
- TODO. stable-1.5 2013-02-05, by Florian Pose
- Added ecrt_slave_config_reg_so_entry_pos() to register non-unique entries. stable-1.5 2013-02-05, by Florian Pose
- Exported ecrt_domain_size() for userspace. stable-1.5 2013-02-05, by Florian Pose
- TODO. stable-1.5 2013-02-05, by Florian Pose
- FoE datagram / fsm->datagram bugfix, thanks to R. Roesch. stable-1.5 2013-02-05, by Florian Pose
- Fixed FoE data opcode, thanks to R. Roesch. stable-1.5 2013-02-05, by Florian Pose
- Fixed repeating e1000e reset while link down, thanks to J. Kunz. stable-1.5 2013-02-05, by Florian Pose
- Fixed link detection in older e1000e drivers. stable-1.5 2013-01-11, by Florian Pose
- Avoided io_sem locking from userspace/rtdm library. stable-1.5 2013-01-10, by Florian Pose
- Fixed link detection in e1000e driver for 3.4. stable-1.5 2013-01-10, by Florian Pose
- Minor change. stable-1.5 2013-01-10, by Florian Pose
- Added r8169 driver for kernel 3.4. stable-1.5 2013-01-10, by Florian Pose
- Added e1000 driver for kernel 3.4. stable-1.5 2013-01-08, by Florian Pose
- Added e100 driver for kernel 3.4. stable-1.5 2013-01-08, by Florian Pose
- Improved e1000e driver for kernel 3.4. stable-1.5 2013-01-08, by Florian Pose
- Added e1000e driver for kernel 3.4. stable-1.5 2013-01-07, by Florian Pose
- Added 8139too driver for kernel 3.4. stable-1.5 2013-01-07, by Florian Pose
- Added AM_PROG_AR necessary for autoconf 1.12. stable-1.5 2012-12-13, by Florian Pose
- Made datagram const. stable-1.5 2012-12-07, by Florian Pose
- Fixed some warnings on 64 bit systems. stable-1.5 2012-12-06, by Florian Pose
- Removed unused variable. stable-1.5 2012-12-06, by Florian Pose
- Fixed io_sem usage in queue_external_datagrams(). stable-1.5 2012-12-06, by Florian Pose
- Removed unnecessary semaphore uses for emergency requests. stable-1.5 2012-12-06, by Florian Pose
- Added vmalloc() include fix for ARM architecture, thanks to Andrea Scian. stable-1.5 2012-12-06, by Florian Pose
- Do not use slaves's SoE state machine for configuration. stable-1.5 2012-12-06, by Florian Pose
- Added function attribute definition. stable-1.5 2012-12-06, by Florian Pose
- Fixed format specifiers. stable-1.5 2012-12-06, by Florian Pose
- Fixed format specifiers. stable-1.5 2012-12-06, by Florian Pose
- Minor: Fixed format specifiers. stable-1.5 2012-12-06, by Florian Pose
- Fixed some ioctl() permissions. stable-1.5 2012-12-06, by Florian Pose
- Send sync datagrams only if reference clock is found. stable-1.5 2012-12-05, by Florian Pose
- Minor DC debugging. stable-1.5 2012-12-05, by Florian Pose
- Fixed some ioctl() return values. stable-1.5 2012-12-05, by Florian Pose
- Fixed e1000_open() in e1000e drivers. stable-1.5 2012-12-05, by Florian Pose
- Fixed __e1000_maybe_stop_tx() for e1000e. stable-1.5 2012-12-05, by Florian Pose
- Fixed __e1000_maybe_stop_tx(). stable-1.5 2012-12-05, by Florian Pose
- Fixed ecrt_domain_process() broken in 71d38ff288b3. stable-1.5 2012-12-05, by Florian Pose
- Fixed possible segfault in e1000_open() function. stable-1.5 2012-12-05, by Florian Pose
- Minor change. stable-1.5 2012-12-05, by Florian Pose
- Using common waitqueue for requests. stable-1.5 2012-12-04, by Florian Pose
- TODO. stable-1.5 2012-12-04, by Florian Pose
- Removed unnecessary ec_master_soe_request_t type. stable-1.5 2012-12-04, by Florian Pose
- Removed unnecessary ec_master_foe_request_t; fixed FoE access. stable-1.5 2012-12-04, by Florian Pose
- Improved preprocessor macro usage reg. redundancy. stable-1.5 2012-12-04, by Florian Pose
- Removed unnecessary loop when dequeuing register requests. stable-1.5 2012-12-04, by Florian Pose
- Removed unnecessary ec_master_sdo_request_t. stable-1.5 2012-12-04, by Florian Pose
- Minor: Renamed slave_sdo_requests. stable-1.5 2012-12-04, by Florian Pose
- Invalidate processing register requests when clearing configuration. stable-1.5 2012-12-04, by Florian Pose
- Removed unused method. stable-1.5 2012-12-04, by Florian Pose
- Mark processing SDO request as invalid if config is cleared. stable-1.5 2012-12-04, by Florian Pose
- Reset master state machine when going to orphaned phase. stable-1.5 2012-12-04, by Florian Pose
- Minor changes. stable-1.5 2012-12-04, by Florian Pose
- merge stable-1.5 2012-11-30, by Florian Pose
- Added configure option for redundancy (--with-devices). stable-1.5 2012-11-30, by Florian Pose
- Added missing newline. stable-1.5 2012-11-30, by Florian Pose
- Improved device member initialisation. stable-1.5 2012-11-30, by Florian Pose
- Removed unused field. stable-1.5 2012-11-30, by Florian Pose
- Changed the datatypes of the shift times in ecrt_slave_config_dc() stable-1.5 2012-11-29, by Florian Pose
- Adjusted DC clock discipline parameters. stable-1.5 2012-11-20, by Florian Pose
- Added interface to select the reference clock and to sync to it. stable-1.5 2012-11-20, by Florian Pose
- Removed AM_PROG_AR. stable-1.5 2012-11-20, by Florian Pose
- Added feature flag for register access. stable-1.5 2012-11-20, by Florian Pose
- Fixed typos in doc. stable-1.5 2012-11-20, by Florian Pose
- Added interface to read/write register contents; re-worked register requests. stable-1.5 2012-11-14, by Florian Pose
- Immediately restart slave FSM on several failed requests. stable-1.5 2012-11-14, by Florian Pose
- Removed state-dependent skip messages. stable-1.5 2012-11-14, by Florian Pose
- Output slave FSM datagram statistics. stable-1.5 2012-11-14, by Florian Pose
- Fixed documentation of EC_REQUEST_BUSY. stable-1.5 2012-11-14, by Florian Pose
- Added API for querying CoE emergency requests. stable-1.5 2012-11-06, by Florian Pose
- Added AM_PROG_AR to configure.ac. stable-1.5 2012-11-06, by Florian Pose
- EtherLab skin for 'ethercat pdos' command. stable-1.5 2012-10-24, by Florian Pose
- Show complete access flag in config view. stable-1.5 2012-10-09, by Florian Pose
- Added ecrt_sdo_request_index() method to change index and subindex. stable-1.5 2012-10-04, by Florian Pose
- Re-worked and seamlessly integrated RTDM interface. stable-1.5 2012-09-20, by Florian Pose
- Do not re-allocate memory in VoE handler. stable-1.5 2012-09-20, by Florian Pose
- Do not re-alloc memory in library implementation of ecrt_sdo_request_state(). stable-1.5 2012-09-20, by Florian Pose
- Minor change. stable-1.5 2012-09-19, by Florian Pose
- Minor: Line breaking. stable-1.5 2012-09-19, by Florian Pose
- Again fixed some compiler warnings. stable-1.5 2012-09-19, by Florian Pose
- Fixed some compiler warnings. stable-1.5 2012-09-19, by Florian Pose
- Minor: Fixed max line length. stable-1.5 2012-09-19, by Florian Pose
- Avoided use of AM_CFLAGS, which is not used in some situations; fixed warning. stable-1.5 2012-09-19, by Florian Pose
- Minor change. stable-1.5 2012-09-11, by Florian Pose
- Minor change. stable-1.5 2012-09-11, by Florian Pose
- Minor: removed spaces from Makefile. stable-1.5 2012-09-11, by Florian Pose
- Removed trailing spaces. stable-1.5 2012-09-06, by Florian Pose
- Ignore .deps/*.Po stable-1.5 2012-09-06, by Florian Pose
- Merged redundancy branch to stable-1.5. stable-1.5 2012-09-06, by Florian Pose
- Fixed all mangled hg keywords. redundancy 2012-09-06, by Florian Pose
- Fixed all mangled hg keywords. stable-1.5 2012-09-06, by Florian Pose
- Fixed malformed keywords. stable-1.5 2012-09-06, by Florian Pose
- merge. 2012-09-06, by Florian Pose
- Replaced all mangled hg keywords. 2012-09-06, by Florian Pose
- Fixed malformed keywords. 2012-09-06, by Florian Pose
- Fixed AL status code lookup. 2012-08-06, by Florian Pose
- Malformed hg keywords. 2012-09-04, by Florian Pose
- Malformed hg keywords. stable-1.5 2012-09-04, by Florian Pose
- Fixed AL status code lookup. 2012-08-06, by Florian Pose
- Fixed AL status code lookup. stable-1.5 2012-08-06, by Florian Pose
- Added e1000e driver for kernel 3.2, thanks to J. Kunz. stable-1.5 2012-07-23, by Florian Pose
- Added e1000e driver for kernel 3.2, thanks to J. Kunz. 2012-07-23, by Florian Pose
- Added r8169 driver for kernel 3.2 (thanks to J. Kunz). stable-1.5 2012-07-23, by Florian Pose
- Added missing linux/modules.h include. stable-1.5 2012-07-23, by Florian Pose
- Added r8169 driver for kernel 3.2 (thanks to J. Kunz). 2012-07-23, by Florian Pose
- Added missing linux/modules.h include. 2012-07-23, by Florian Pose
- Added r8169 driver for 2.6.36, thanks to J. Kunz. stable-1.5 2012-07-23, by Florian Pose
- Added r8169 driver for 2.6.36, thanks to J. Kunz. 2012-07-23, by Florian Pose
- Fixed 8139too driver for 2.6.36. stable-1.5 2012-07-23, by Florian Pose
- Fixed 8139too driver for 2.6.36. 2012-07-23, by Florian Pose
- Applied ethtool patch from Jun Yuan. stable-1.5 2012-07-23, by Florian Pose
- Applied ethtool patch from Jun Yuan. 2012-07-23, by Florian Pose
- Added e1000 driver for kernel 3.0. 2012-07-13, by Florian Pose
- Fixed COPYING.LESSER to be LGPL 2.1 (like in file headers). 2012-07-13, by Florian Pose
- Removed whitespace. 2012-07-13, by Florian Pose
- Removed whitespace. 2012-07-09, by Florian Pose
- Removed whitespace. 2012-07-09, by Florian Pose
- Install ethercat service to multi-user target by default. 2012-04-10, by Florian Pose
- Added e100 driver for kernel 3.0. 2012-04-10, by Florian Pose
- Fixed 'String too large' error in command-line tool. 2012-04-10, by Florian Pose
- TODO. 2012-07-13, by Florian Pose
- Added e1000 driver for kernel 3.0. stable-1.5 2012-07-13, by Florian Pose
- Fixed COPYING.LESSER to be LGPL 2.1 (like in file headers). stable-1.5 2012-07-13, by Florian Pose
- Removed whitespace. stable-1.5 2012-07-13, by Florian Pose
- Removed whitespace. stable-1.5 2012-07-09, by Florian Pose
- Removed whitespace. stable-1.5 2012-07-09, by Florian Pose
- Added EC_HAVE_REDUNDANCY. redundancy 2012-05-31, by Florian Pose
- Added ecrt_master_link_state() to retrieve information about a redundant link. redundancy 2012-05-31, by Florian Pose
- Minor: Braces. redundancy 2012-05-31, by Florian Pose
- merge. stable-1.5 2012-04-10, by Florian Pose
- Install ethercat service to multi-user target by default. stable-1.5 2012-04-10, by Florian Pose
- Added e100 driver for kernel 3.0. stable-1.5 2012-04-10, by Florian Pose
- Fixed 'String too large' error in command-line tool. stable-1.5 2012-04-10, by Florian Pose
- Slave scanning and configuration on all links. redundancy 2012-04-06, by Florian Pose
- Clarified fields of ec_master_state_t in redundancy case. redundancy 2012-04-06, by Florian Pose
- Improved/fixed frame statistics (low-pass filters). redundancy 2012-03-19, by Florian Pose
- Fixed frame loss statistics. redundancy 2012-03-19, by Florian Pose
- Fixed sending on backup link if main link is down. redundancy 2012-03-17, by Florian Pose
- Partial WC output in domains command. redundancy 2012-03-16, by Florian Pose
- Loop through datagrams, then FMMUs; redundancy flag in domain state. redundancy 2012-03-16, by Florian Pose
- Compare with send buffer; copy changed data. redundancy 2012-03-16, by Florian Pose
- Avoided casting-away constness in expected working counter calculation. redundancy 2011-08-11, by Florian Pose
- Replaced i with dev_idx. redundancy 2012-03-15, by Florian Pose
- Use 1.5 documentation/ethercat_doc.tex. redundancy 2012-03-15, by Florian Pose
- Use 1.5 devices/e1000e/Makefile.am. redundancy 2012-03-15, by Florian Pose
- Use 1.5 NEWS. redundancy 2012-03-15, by Florian Pose
- NEWS. redundancy 2012-01-30, by Florian Pose
- Added fix for ESC port order (DC delay calculation). redundancy 2012-01-30, by Florian Pose
- Added e1000e driver for 2.6.35. redundancy 2012-01-30, by Florian Pose
- Minor: Indentation and braces. redundancy 2012-01-30, by Florian Pose
- Minor: Indentation. redundancy 2012-01-30, by Florian Pose
- Added e1000 driver for 2.6.35. redundancy 2012-01-30, by Florian Pose
- Added e100 driver for 2.6.35. redundancy 2012-01-30, by Florian Pose
- Fixed opening device. redundancy 2012-01-25, by Florian Pose
- Added r8169 driver for 2.6.35. redundancy 2012-01-25, by Florian Pose
- Version 1.5.1. redundancy 2012-01-24, by Florian Pose
- Added missing dist for e1000 driver for 2.6.31. redundancy 2012-01-24, by Florian Pose
- Fixed missing dist for r8169 for 2.6.32. redundancy 2012-01-24, by Florian Pose
- Fixed reset of allow_scanning flag if ecrt_master_activate() was not called. redundancy 2012-01-13, by Florian Pose
- Version 1.5.0. redundancy 2012-01-10, by Florian Pose
- Add ethercat.conf to distribution. redundancy 2012-01-10, by Florian Pose
- Renamed original parts of e1000 driver for 2.6.29. redundancy 2012-01-10, by Florian Pose
- Allocated ioctl data structures dynamically to avoid stack warnings. redundancy 2012-01-10, by Florian Pose
- Decreased maximum length of error message to avoid stack warning. redundancy 2012-01-10, by Florian Pose
- Added changes in e1000 driver for 2.6.27. redundancy 2012-01-10, by Florian Pose
- Fixed suspend/resume for r8169 drivers. redundancy 2012-01-10, by Florian Pose
- Fixed semaphore header for kernels < 2.6.27. redundancy 2012-01-10, by Florian Pose
- Copy missing slave_info data in kernel space. redundancy 2012-01-10, by Florian Pose
- Added slave_info documentation. redundancy 2012-01-10, by Florian Pose
- Fixed copying port information. redundancy 2010-04-30, by Stefan Weiser
- Insert port information into slave info. redundancy 2010-04-30, by Stefan Weiser
- Avoided unused variable warnings. redundancy 2012-01-09, by Florian Pose
- Avoided unused variable warnings. redundancy 2012-01-09, by Florian Pose
- Avoided unused variable warnings. redundancy 2012-01-09, by Florian Pose
- Avoided unused variable warnings. redundancy 2012-01-09, by Florian Pose
- Avoided unused variable warnings. redundancy 2012-01-09, by Florian Pose
- TODO. redundancy 2012-01-09, by Florian Pose
- Enable generic driver by default. redundancy 2012-01-09, by Florian Pose
- Minor changes. redundancy 2012-01-04, by Florian Pose
- Added r8169 driver for 2.6.37. redundancy 2012-01-04, by Florian Pose
- Added e100 driver for 2.6.37. redundancy 2012-01-04, by Florian Pose
- Fixed crash on loading e100 driver for 2.6.33 (allocating cbs_pool). redundancy 2012-01-04, by Florian Pose
- Fixed typo. redundancy 2011-11-04, by Florian Pose
- Added e1000e driver for 2.6.33. redundancy 2011-12-15, by Florian Pose
- Added 8139too driver for 2.6.35. redundancy 2012-01-09, by Florian Pose
- Avoided enabling timer. redundancy 2012-01-09, by Florian Pose
- Fixed ISR. redundancy 2012-01-09, by Florian Pose
- Fixed e1000 link detection race. redundancy 2012-01-09, by Florian Pose
- Minor spacing changes. redundancy 2012-01-09, by Florian Pose
- Fixed accidentially used operator & by using &&. redundancy 2011-11-23, by Florian Pose
- Added e1000 driver for 2.6.37. redundancy 2011-12-15, by Florian Pose
- Add drivers for kernel 2.6.33 redundancy 2011-03-03, by Andreas Stewering-Bone
- Removed executable permissions. redundancy 2011-12-15, by Florian Pose
- Added e1000 driver for 2.6.32. redundancy 2011-12-15, by Florian Pose
- Added e1000 port for 2.6.31 redundancy 2010-11-04, by Christoph Mathys
- Allow gaps between SDO subindices when fetching dictionary. redundancy 2012-01-05, by Florian Pose
- Allow CoE OD List Segments to have 6 bytes instead of 8. redundancy 2012-01-05, by Florian Pose
- Fixed appending to LOADED_MODULES variable. redundancy 2012-01-04, by Florian Pose
- Added first systemd support. redundancy 2012-01-04, by Florian Pose
- Fixed possible null pointer dereference in ethercat tool. redundancy 2012-01-04, by Florian Pose
- TODO. redundancy 2012-01-04, by Florian Pose
- Removed some locks causing latency when using the library; added ioctl() redundancy 2011-12-20, by Florian Pose
- Removed unnecessary call of ec_master_inject_external_datagrams(). redundancy 2011-12-16, by Florian Pose
- Minor: Fixed spacing. redundancy 2011-12-16, by Florian Pose
- Read AL status code before acknowledging spontaneous state change. redundancy 2011-12-16, by Florian Pose
- Improved generic driver error messages. redundancy 2011-12-14, by Florian Pose
- Improved resetting number of responding slaves. redundancy 2011-12-09, by Florian Pose
- Minor: Ordered master member initialisations. redundancy 2011-12-09, by Florian Pose
- Minor. redundancy 2011-12-09, by Florian Pose
- Add e1000 for 2.6.29 redundancy 2011-05-25, by Andreas Stewering-Bone
- Updated configuration docs. redundancy 2011-11-04, by Florian Pose
- Use ps2pdf for graph generation. redundancy 2011-11-04, by Florian Pose
- Added --enable-wildcards to use 0xffffffff as wildcard for vendor ID and redundancy 2011-11-04, by Florian Pose
- Again coding style. redundancy 2011-10-28, by Florian Pose
- Added coding style document. redundancy 2011-10-28, by Florian Pose
- NEWS. stable-1.5 2012-01-30, by Florian Pose
- Added fix for ESC port order (DC delay calculation). stable-1.5 2012-01-30, by Florian Pose
- Added e1000e driver for 2.6.35. stable-1.5 2012-01-30, by Florian Pose
- Minor: Indentation and braces. stable-1.5 2012-01-30, by Florian Pose
- Minor: Indentation. stable-1.5 2012-01-30, by Florian Pose
- Added e1000 driver for 2.6.35. stable-1.5 2012-01-30, by Florian Pose
- Added e100 driver for 2.6.35. stable-1.5 2012-01-30, by Florian Pose
- Added e1000e driver for 2.6.35. 2012-01-30, by Florian Pose
- Minor: Indentation and braces. 2012-01-30, by Florian Pose
- Minor: Indentation. 2012-01-30, by Florian Pose
- Added e1000 driver for 2.6.35. 2012-01-30, by Florian Pose
- Added e100 driver for 2.6.35. 2012-01-30, by Florian Pose
- Fixed opening device. stable-1.5 2012-01-25, by Florian Pose
- Added r8169 driver for 2.6.35. stable-1.5 2012-01-25, by Florian Pose
- Fixed opening device. 2012-01-25, by Florian Pose
- Added r8169 driver for 2.6.35. 2012-01-25, by Florian Pose
- Version 1.5.1. stable-1.5 2012-01-24, by Florian Pose
- Added missing dist for e1000 driver for 2.6.31. 2012-01-24, by Florian Pose
- Fixed missing dist for r8169 for 2.6.32. 2012-01-24, by Florian Pose
- Added missing dist for e1000 driver for 2.6.31. stable-1.5 2012-01-24, by Florian Pose
- Fixed missing dist for r8169 for 2.6.32. stable-1.5 2012-01-24, by Florian Pose
- Fixed semaphore bug introduced in 96e2ae6cce95. 2012-01-13, by Florian Pose
- Fixed reset of allow_scanning flag if ecrt_master_activate() was not called. 2012-01-13, by Florian Pose
- Redundant outputs via datagram pairs. redundancy 2012-01-12, by Florian Pose
- Datagram device_index member. redundancy 2012-01-12, by Florian Pose
- Devices as array; lock all device modules with module_get(). redundancy 2012-01-12, by Florian Pose
- Fixed reset of allow_scanning flag if ecrt_master_activate() was not called. stable-1.5 2012-01-13, by Florian Pose
- Version 1.5.0. stable-1.5 2012-01-10, by Florian Pose
- Add ethercat.conf to distribution. 2012-01-10, by Florian Pose
- Add ethercat.conf to distribution. stable-1.5 2012-01-10, by Florian Pose
- Renamed original parts of e1000 driver for 2.6.29. 2012-01-10, by Florian Pose
- Renamed original parts of e1000 driver for 2.6.29. stable-1.5 2012-01-10, by Florian Pose
- Allocated ioctl data structures dynamically to avoid stack warnings. 2012-01-10, by Florian Pose
- Decreased maximum length of error message to avoid stack warning. 2012-01-10, by Florian Pose
- Allocated ioctl data structures dynamically to avoid stack warnings. stable-1.5 2012-01-10, by Florian Pose
- Decreased maximum length of error message to avoid stack warning. stable-1.5 2012-01-10, by Florian Pose
- TODO. 2012-01-10, by Florian Pose
- Added changes in e1000 driver for 2.6.27. 2012-01-10, by Florian Pose
- Fixed suspend/resume for r8169 drivers. 2012-01-10, by Florian Pose
- Fixed semaphore header for kernels < 2.6.27. 2012-01-10, by Florian Pose
- Added changes in e1000 driver for 2.6.27. stable-1.5 2012-01-10, by Florian Pose
- Fixed suspend/resume for r8169 drivers. stable-1.5 2012-01-10, by Florian Pose
- Fixed semaphore header for kernels < 2.6.27. stable-1.5 2012-01-10, by Florian Pose
- Copy missing slave_info data in kernel space. 2012-01-10, by Florian Pose
- Added slave_info documentation. 2012-01-10, by Florian Pose
- Minor: Indentation. 2012-01-10, by Florian Pose
- Minor: Line wrapping. 2012-01-10, by Florian Pose
- Improved docs. 2012-01-10, by Florian Pose
- Copy missing slave_info data in kernel space. stable-1.5 2012-01-10, by Florian Pose
- Added slave_info documentation. stable-1.5 2012-01-10, by Florian Pose
- Fixed copying port information. stable-1.5 2010-04-30, by Stefan Weiser
- Insert port information into slave info. stable-1.5 2010-04-30, by Stefan Weiser
- Avoided unused variable warnings. 2012-01-09, by Florian Pose
- Avoided unused variable warnings. 2012-01-09, by Florian Pose
- Avoided unused variable warnings. 2012-01-09, by Florian Pose
- Avoided unused variable warnings. 2012-01-09, by Florian Pose
- Avoided unused variable warnings. 2012-01-09, by Florian Pose
- Avoided unused variable warnings. stable-1.5 2012-01-09, by Florian Pose
- Avoided unused variable warnings. stable-1.5 2012-01-09, by Florian Pose
- Avoided unused variable warnings. stable-1.5 2012-01-09, by Florian Pose
- Avoided unused variable warnings. stable-1.5 2012-01-09, by Florian Pose
- Avoided unused variable warnings. stable-1.5 2012-01-09, by Florian Pose
- TODO. stable-1.5 2012-01-09, by Florian Pose
- Enable generic driver by default. 2012-01-09, by Florian Pose
- Enable generic driver by default. stable-1.5 2012-01-09, by Florian Pose
- Added missing slash. 2012-01-09, by Florian Pose
- Improved generic driver error messages. 2011-12-14, by Florian Pose
- Minor changes. stable-1.5 2012-01-04, by Florian Pose
- Added r8169 driver for 2.6.37. stable-1.5 2012-01-04, by Florian Pose
- Added e100 driver for 2.6.37. stable-1.5 2012-01-04, by Florian Pose
- Fixed crash on loading e100 driver for 2.6.33 (allocating cbs_pool). stable-1.5 2012-01-04, by Florian Pose
- Minor. stable-1.5 2011-07-25, by Florian Pose
- Fixed typo. stable-1.5 2011-11-04, by Florian Pose
- Added e1000e driver for 2.6.37. stable-1.5 2011-07-25, by Florian Pose
- Added e1000e driver for 2.6.33. stable-1.5 2011-12-15, by Florian Pose
- Added e1000e driver for 2.6.32. stable-1.5 2011-10-28, by Florian Pose
- Added e1000e driver for 2.6.34. Thanks to Siwei Zhuang. stable-1.5 2011-07-06, by Florian Pose
- Added 8139too driver for 2.6.35. stable-1.5 2012-01-09, by Florian Pose
- Avoided enabling timer. stable-1.5 2012-01-09, by Florian Pose
- Avoided enabling timer. 2012-01-09, by Florian Pose
- Fixed ISR. stable-1.5 2012-01-09, by Florian Pose
- Fixed ISR. 2012-01-09, by Florian Pose
- Fixed missing slash. 2012-01-09, by Florian Pose
- Fixed e1000 link detection race. 2012-01-09, by Florian Pose
- Minor spacing changes. 2012-01-09, by Florian Pose
- Fixed e1000 link detection race. stable-1.5 2012-01-09, by Florian Pose
- Minor spacing changes. 2012-01-09, by Florian Pose
- Merged 8139too-2.6.32-ethercat.c from stable-1.5. 2012-01-09, by Florian Pose
- Minor spacing changes. stable-1.5 2012-01-09, by Florian Pose
- Fixed accidentially used operator & by using &&. stable-1.5 2011-11-23, by Florian Pose
- Added e1000 driver for 2.6.37. stable-1.5 2011-12-15, by Florian Pose
- Add drivers for kernel 2.6.33 stable-1.5 2011-03-03, by Andreas Stewering-Bone
- Removed executable permissions. stable-1.5 2011-12-15, by Florian Pose
- Added e1000 driver for 2.6.32. stable-1.5 2011-12-15, by Florian Pose
- Added e1000 port for 2.6.31 stable-1.5 2010-11-04, by Christoph Mathys
- Allow gaps between SDO subindices when fetching dictionary. stable-1.5 2012-01-05, by Florian Pose
- Allow CoE OD List Segments to have 6 bytes instead of 8. stable-1.5 2012-01-05, by Florian Pose
- Allow gaps between SDO subindices when fetching dictionary. 2012-01-05, by Florian Pose
- Allow CoE OD List Segments to have 6 bytes instead of 8. 2012-01-05, by Florian Pose
- Fixed appending to LOADED_MODULES variable. stable-1.5 2012-01-04, by Florian Pose
- Added first systemd support. stable-1.5 2012-01-04, by Florian Pose
- Fixed possible null pointer dereference in ethercat tool. stable-1.5 2012-01-04, by Florian Pose
- Fixed appending to LOADED_MODULES variable. 2012-01-04, by Florian Pose
- Added first systemd support. 2012-01-04, by Florian Pose
- Fixed possible null pointer dereference in ethercat tool. 2012-01-04, by Florian Pose
- TODO. stable-1.5 2012-01-04, by Florian Pose
- Added r8169 driver for 2.6.37. 2012-01-04, by Florian Pose
- Minor changes. 2012-01-04, by Florian Pose
- Added e100 driver for 2.6.37. 2012-01-04, by Florian Pose
- Fixed crash on loading e100 driver for 2.6.33 (allocating cbs_pool). 2012-01-04, by Florian Pose
- Removed some locks causing latency when using the library; added ioctl() 2011-12-20, by Florian Pose
- Minor: Fixed spacing. 2011-12-16, by Florian Pose
- Removed some locks causing latency when using the library; added ioctl() stable-1.5 2011-12-20, by Florian Pose
- merge stable-1.5 2011-12-16, by Florian Pose
- Removed unnecessary call of ec_master_inject_external_datagrams(). stable-1.5 2011-12-16, by Florian Pose
- Minor: Fixed spacing. stable-1.5 2011-12-16, by Florian Pose
- Read AL status code before acknowledging spontaneous state change. 2011-12-16, by Florian Pose
- Read AL status code before acknowledging spontaneous state change. stable-1.5 2011-12-16, by Florian Pose
- Added e1000e driver for 2.6.33. 2011-12-15, by Florian Pose
- Added e1000 driver for 2.6.37. 2011-12-15, by Florian Pose
- Removed executable permissions. 2011-12-15, by Florian Pose
- Added e1000 driver for 2.6.32. 2011-12-15, by Florian Pose
- Improved generic driver error messages. stable-1.5 2011-12-14, by Florian Pose
- Improved resetting number of responding slaves. stable-1.5 2011-12-09, by Florian Pose
- Minor: Ordered master member initialisations. stable-1.5 2011-12-09, by Florian Pose
- Minor. stable-1.5 2011-12-09, by Florian Pose
- Improved resetting number of responding slaves. 2011-12-09, by Florian Pose
- Fixed missing initialisation of allow_config flag. 2011-12-09, by Florian Pose
- Fixed compiler error in master.c; thanks to Jun Yuan. 2011-12-05, by Florian Pose
- Fixed accidentially used operator & by using &&. 2011-11-23, by Florian Pose
- Fixed driver unloading in e1000 for 2.6.29. 2011-11-23, by Florian Pose
- Add e1000 for 2.6.29 stable-1.5 2011-05-25, by Andreas Stewering-Bone
- Output device name in link change message; fixed null-pointer protections. redundancy 2011-11-09, by Florian Pose
- Renamed main device to ecmX. redundancy 2011-11-09, by Florian Pose
- Adjusted frame statistics for the use with two devices. redundancy 2011-11-09, by Florian Pose
- Poll both devices. redundancy 2011-11-09, by Florian Pose
- Master accepting two devices. redundancy 2011-11-09, by Florian Pose
- Fixed compiler warning. stable-1.5 2011-10-28, by Florian Pose
- Fixed null pointer dereference on loading e100 driver for 2.6.32. 2011-11-09, by Florian Pose
- Updated configuration docs. 2011-11-04, by Florian Pose
- Use ps2pdf for graph generation. 2011-11-04, by Florian Pose
- Added --enable-wildcards to use 0xffffffff as wildcard for vendor ID and 2011-11-04, by Florian Pose
- Added ecrt_master_sdo_download_complete() for ad-hoc downloading SDOs (also 2011-10-24, by Florian Pose
- Always enable a sync manager, if there are registered PDOs conatined (and it 2011-10-24, by Florian Pose
- Minor: Added missing comma. 2011-10-11, by Florian Pose
- Added e100 driver for 2.6.32. 2011-09-22, by Florian Pose
- Fixed missing return causing slaves not going to OP. 2011-09-22, by Florian Pose
- Fixed typo. 2011-09-19, by Florian Pose
- Removed unnecessary list header. 2011-09-16, by Florian Pose
- Fixed null pointer dereference on loading e100 driver for 2.6.32. stable-1.5 2011-11-09, by Florian Pose
- Fixed null pointer dereference on loading e100 driver for 2.6.32. redundancy 2011-11-09, by Florian Pose
- Updated configuration docs. stable-1.5 2011-11-04, by Florian Pose
- Use ps2pdf for graph generation. stable-1.5 2011-11-04, by Florian Pose
- Added --enable-wildcards to use 0xffffffff as wildcard for vendor ID and stable-1.5 2011-11-04, by Florian Pose
- Fixed typo. 2011-11-04, by Florian Pose
- Fixed compiler warning. redundancy 2011-10-28, by Florian Pose
- Added e1000e driver for 2.6.32. redundancy 2011-10-28, by Florian Pose
- Added e1000e driver for 2.6.37. redundancy 2011-07-25, by Florian Pose
- Minor. redundancy 2011-07-25, by Florian Pose
- Added e1000e driver for 2.6.34. Thanks to Siwei Zhuang. redundancy 2011-07-06, by Florian Pose
- merge 2011-10-28, by Florian Pose
- Added e1000e driver for 2.6.32. 2011-10-28, by Florian Pose
- Fixed compiler warning. 2011-10-28, by Florian Pose
- Improved comments. redundancy 2011-10-28, by Florian Pose
- Again coding style. stable-1.5 2011-10-28, by Florian Pose
- Again coding style. 2011-10-28, by Florian Pose
- Added coding style document. 2011-10-28, by Florian Pose
- Added coding style document. stable-1.5 2011-10-28, by Florian Pose
- Added ecrt_master_sdo_download_complete() for ad-hoc downloading SDOs (also stable-1.5 2011-10-24, by Florian Pose
- Always enable a sync manager, if there are registered PDOs conatined (and it stable-1.5 2011-10-24, by Florian Pose
- Minor: Added missing comma. stable-1.5 2011-10-11, by Florian Pose
- Added e100 driver for 2.6.32. stable-1.5 2011-09-22, by Florian Pose
- Fixed missing return causing slaves not going to OP. stable-1.5 2011-09-22, by Florian Pose
- Fixed typo. stable-1.5 2011-09-19, by Florian Pose
- Removed unnecessary list header. stable-1.5 2011-09-16, by Florian Pose
- Removed allow_config flag and obsolete request to OP. 2011-09-16, by Florian Pose
- Don not copy frame data to datagram memory, if datagram type is write-only. 2011-09-16, by Florian Pose
- Removed allow_config flag and obsolete request to OP. stable-1.5 2011-09-16, by Florian Pose
- Don not copy frame data to datagram memory, if datagram type is write-only. stable-1.5 2011-09-16, by Florian Pose
- Fixed keywords. 2011-09-16, by Florian Pose
- Bugfix: Reset config_changed flag when aborting state check. 2011-09-16, by Florian Pose
- Bugfix: Reset config_changed flag when aborting state check. stable-1.5 2011-09-16, by Florian Pose
- Fixed compiler error; added SDO debugging. 2011-09-15, by Florian Pose
- Implemented ecrt_master_sdo_upload() and ecrt_master_sdo_download() also for stable-1.5 2011-09-15, by Florian Pose
- No app_time is only warning. stable-1.5 2011-09-15, by Florian Pose
- Implemented ecrt_master_sdo_upload() and ecrt_master_sdo_download() for kernel 2011-09-15, by Florian Pose
- Minor: Fixed line breaks and spacing. 2011-09-15, by Florian Pose
- Minor: Fixed line breaks and spacing... 2011-09-15, by Florian Pose
- Output app_time in DC debugging. stable-1.5 2011-09-15, by Florian Pose
- Fixed spacing and added some thoughts about the overlapping PDOs 2011-08-11, by Florian Pose
- Minor: removed empty lines. 2011-08-11, by Florian Pose
- Avoided casting-away constness in expected working counter calculation. 2011-08-11, by Florian Pose
- Improved DC sync at startup: Abort iterating though slaves and first correct stable-1.5 2011-08-09, by Florian Pose
- Minor: Fixed broken keyword strings. stable-1.5 2011-08-09, by Florian Pose
- Improved DC sync at startup: Abort iterating though slaves and first correct 2011-08-09, by Florian Pose
- Updated master fsm graph. 2011-08-09, by Florian Pose
- Updated master fsm graph. stable-1.5 2011-08-09, by Florian Pose
- Fixed skipped datagrams output again; added datagram information on skip. 2011-08-01, by Florian Pose
- Minor: Fixed line wraps and spacing. 2011-08-01, by Florian Pose
- Fixed typo. 2011-08-01, by Florian Pose
- Added e1000e driver for 2.6.37. 2011-07-25, by Florian Pose
- Minor. 2011-07-25, by Florian Pose
- merge. 2011-07-25, by Florian Pose
- Removed unused variables. 2011-07-25, by Florian Pose
- Minor spacing changes. 2011-07-25, by Florian Pose
- Fixed malformed comment. 2011-07-25, by Florian Pose
- merge. 2011-07-21, by Florian Pose
- Fixed bug in ec_master_queue_datagram() introduced in c9d32805d984. stable-1.5 2011-07-21, by Florian Pose
- Fixed bug in ec_master_queue_datagram() introduced in c9d32805d984. 2011-07-21, by Florian Pose
- Minor: removed unnecessary return. stable-1.5 2011-07-08, by Florian Pose
- Improved ecrt_master_queue_datagram(); detect skipped datagrams also when stable-1.5 2011-07-08, by Florian Pose
- Fixed datagram statistics output (skipped datagrams). stable-1.5 2011-07-08, by Florian Pose
- merge. 2011-07-08, by Florian Pose
- Minor: removed unnecessary return. 2011-07-08, by Florian Pose
- Improved ecrt_master_queue_datagram(); detect skipped datagrams also when 2011-07-08, by Florian Pose
- Fixed datagram statistics output (skipped datagrams). 2011-07-08, by Florian Pose
- Added e1000e driver for 2.6.34. Thanks to Siwei Zhuang. 2011-07-06, by Florian Pose
- Added 8139too driver for 2.6.32. stable-1.5 2011-05-16, by Florian Pose
- Fixed compiler error in 8139too-2.6.37-ethercat.c. stable-1.5 2011-05-13, by Florian Pose
- Added 8139too drivers for 2.6.36 and 2.6.37. stable-1.5 2011-05-12, by Florian Pose
- Add e1000 for 2.6.29 2011-05-25, by Andreas Stewering-Bone
- Fix for new locking for rtdm module 2011-05-23, by Andreas Stewering-Bone
- Added ignores for rtdm examples. 2011-05-13, by Florian Pose
- Merge. 2011-05-13, by Florian Pose
- Merge. 2011-05-13, by Florian Pose
- Fixed compiler error in 8139too-2.6.37-ethercat.c. 2011-05-13, by Florian Pose
- merge. 2011-05-12, by Florian Pose
- Added 8139too drivers for 2.6.36 and 2.6.37. 2011-05-12, by Florian Pose
- Version 1.5-pre. stable-1.5 2011-05-12, by Florian Pose
- Created stable-1.5 branch. stable-1.5 2011-05-12, by Florian Pose
- Removed "Pd: 0" output that does the initial pagefault. Write to the 2011-05-12, by Florian Pose
- Fixed compiler error for kernel versions < 2.6.23. 2011-05-12, by Florian Pose
- Merge 2011-04-13, by Andreas Stewering-Bone
- Working RTAI LXRT example 2011-03-23, by Andreas Stewering-Bone
- Working RTAI RTDM module 2011-03-22, by Andreas Stewering-Bone
- Working Xenomai Posix example 2011-03-21, by Andreas Stewering-Bone
- Work on Xenomai Posix interface, to be tested 2011-03-21, by Andreas Stewering-Bone
- Fix application time for RTDM interface 2011-03-17, by Andreas Stewering-Bone
- First working RTDM Version, 2011-03-16, by Andreas Stewering-Bone
- Add drivers for kernel 2.6.33 2011-03-03, by Andreas Stewering-Bone
- Merge, adding 8139too for 2.6.32 2011-02-07, by Andreas Stewering-Bone
- Added e1000 driver for 2.6.28. 2011-01-18, by Florian Pose
- Changed accidentally used & operator to &&. 2011-01-18, by Florian Pose
- Add Driver 8139too for kernel 2.6.32 2011-02-07, by Andreas Stewering-Bone
- Merged. 2011-04-05, by Martin Troxler
- fixed kernel oops bug in ec_fsm_coe_down_response (Blame the C Compiler) 2011-03-31, by Martin Troxler
- merged 2011-03-14, by Martin Troxler
- Reduced frame size when sending to mailbox, uses 2 datagrams. Enabled with configure option --enable-mboxframesize 2011-03-14, by Martin Troxler
- fixed race condition when comparing datagram state 2011-03-14, by Martin Troxler
- Added tag Stable for changeset ce2fae4d3c4f 2011-03-14, by Martin Troxler
- merged 2011-03-14, by Martin Troxler
- Fixed segmented sdo dictionary upload (only first segment contains list type) 2011-02-24, by Rafael Blank
- lock io_mutex when unqueueing datagrams; unqueue datagrams from send-receive queue. 2011-01-17, by Martin Troxler
- Minor changes (consistent variable naming) 2011-01-14, by Martin Troxler
- Datagram queue race fixed: insert datagrams into master-fsm_queue with fsm_queue list_head 2011-01-14, by Martin Troxler
- Optionally compile with trace_printk support 2011-01-12, by Martin Troxler
- properly deactivate slaves if there is no eoe slave 2011-01-06, by Matthias Luescher
- always use rt_mutex instead of semaphore for mutual exclusion on kernels >= 2.6.24 (removed --enable-mutex build option) 2011-01-06, by Martin Troxler
- releasing of refcounted requests fixed: do not call EC_SLAVE_DBG without valid slave 2011-01-06, by Martin Troxler
- e1000 on 2.6.33: handle link-down 2011-01-06, by Martin Troxler
- SoE request wait_event() deadlock fixed: use wait_event_interruptible and refcount ec_master_soe_request_t objects with kref 2011-01-05, by Martin Troxler
- Register read/write wait_event() deadlock fixed: use wait_event_interruptible and refcount ec_reg_request_t objects with kref 2011-01-05, by Martin Troxler
- Sii write wait_event() deadlock fixed: use wait_event_interruptible and refcount ec_master_sii_write_request_t objects with kref 2011-01-05, by Martin Troxler
- FoE wait_event() deadlock fixed: refcount ec_master_foe_request_t objects with kref 2011-01-05, by Martin Troxler
- use rt_mutex instead of semaphore for mutual exclusion (use --enable-mutex) 2011-01-05, by Martin Troxler
- SDO wait_event() deadlock fixed: refcount ec_master_sdo_request_t objects with kref 2010-12-23, by Martin Troxler
- Failed FoE transfer: notify foe_queue instead of sdo_queue 2010-12-23, by Martin Troxler
- fixed warning due to 64bit size_t 2010-12-16, by Martin Troxler
- ecrt_master_callbacks: replaced send/receive callback mechanism with locking mechanism; removed ecrt_master_send_ext 2010-12-16, by Martin Troxler
- fixed 'ethercat eoe' command: interchanged rx/tx bytes/rates 2010-12-16, by Martin Troxler
- renamed ext_injection_timeout -> fsm_injection_timeout 2010-12-16, by Martin Troxler
- removed now obsolete ext_datagram_queu 2010-12-16, by Martin Troxler
- removed eoe thread: eoe processing now done by Idle/Operation thread 2010-12-16, by Martin Troxler
- use ext_queue_sem for fsm datagram queue (instead of io_sem) 2010-12-16, by Martin Troxler
- replaced injection_seq mechanism with fsm datagram queue 2010-12-16, by Martin Troxler
- Increment injection_seq on slave state changes 2010-12-14, by Martin Troxler
- ec_master_queue_external_datagram: fixed missing up(io_sem) 2010-12-13, by Martin Troxler
- merge 2011-01-14, by Florian Pose
- Be more tolerant when selecting slaves and domains. 2011-01-04, by Florian Pose
- Fixed / improved config selection. 2011-01-04, by Florian Pose
- Assume increasing ranges if second number is omitted. 2011-01-04, by Florian Pose
- merge. 2010-12-20, by Florian Pose
- Implemented ranges for slaves, configs and domains. 2010-12-14, by Florian Pose
- Added ecrt_master_reset() method. 2010-11-30, by Florian Pose
- Inplace I/O bug: correct domain tx-size when tx-size of input and output fmmu is different. 2010-12-06, by Martin Troxler
- fixed compiling without EC_HAVE_CYCLES (dc_jiffies_app_start_time) 2010-11-30, by Martin Troxler
- Minor 64bit improvements (use %zu when formatting size_t values in printk) 2010-11-29, by Martin Troxler
- fixed ioctl codes, increased ioctl version magic 2010-11-29, by Martin Troxler
- Merged 2010-11-27, by Martin Troxler
- Re-enabled waiting for clock synchronity before setting dc offsets. (changeset b0dcdfbd4238) 2010-11-26, by Martin Troxler
- fixed race when calculating DC offsets and start times due to ec_slave_config_attach: removed obsolete request to change slave state to OP. 2010-11-26, by Martin Troxler
- renamed dc_cycles_app_time -> dc_cycles_app_start_time & dc_jiffies_app_time -> dc_jiffies_app_start_time 2010-11-22, by Martin Troxler
- Idle thread considers fsm step prepared by Op-thread (Otherwise some state changes may get lost) 2010-11-22, by Martin Troxler
- use app_start_time for initial DC offset calculation because app_time might be overwritten while calculating the offsets. 2010-11-22, by Martin Troxler
- Use ESC port order (0-3-1-2) for bus topology and DC delay calculation 2010-11-16, by Martin Troxler
- hg ignored debuild.log 2010-11-09, by Martin Troxler
- Added e1000 port for 2.6.31 2010-11-04, by Christoph Mathys
- merged 2010-10-18, by Martin Troxler
- Inplace I/O: prevent pairing with already paired fmmus 2010-10-18, by Martin Troxler
- Added 8139too driver for 2.6.33 2010-07-23, by Christoph Mathys
- Added e1000 driver for 2.6.33 2010-07-23, by Christoph Mathys
- foe: size of filename truncated to 31 chars and null-terminated 2010-07-07, by Dominik Staubli
- Disabled waiting for clock synchronity before setting dc offsets 2010-05-12, by Martin Troxler
- merged 2010-05-11, by Martin Troxler
- Merged 2010-05-07, by Martin Troxler
- Improved distributed clock offset calculation to speed-up initial drift compensation 2010-05-07, by Martin Troxler
- Increase version magic due to changed ioctl interface: Slave port info, inplace I/O 2010-05-07, by Martin Troxler
- Master process data are initialized to zero. 2010-05-05, by Stefan Weiser
- Inplace I/O: fixed domain command (fmmu logical_address -> domain_address); show domain tx size 2010-05-03, by Martin Troxler
- Fixed copying port information. 2010-04-30, by Stefan Weiser
- Insert port information into slave info. 2010-04-30, by Stefan Weiser
- Inplace I/O: let input Pdos use the same bus space as Output Pdos 2010-04-29, by Martin Troxler
- Merged 2010-04-29, by Martin Troxler
- Added r8169 driver for kernel 2.6.31 2010-03-19, by Matthias Luescher
- added API ecrt_master_configured_slaves_state 2010-03-14, by Martin Troxler
- TODO. 2010-10-25, by Florian Pose
- Added 8139too driver for 2.6.34, thanks to Malcolm Lewis. 2010-10-25, by Florian Pose
- Improved compiling on 2.6.34 (thanks to Malcolm Lewis). 2010-10-25, by Florian Pose
- Added missing header. 2010-10-25, by Florian Pose
- Added r8169 for 2.6.32 (thanks to Robbie K). 2010-10-25, by Florian Pose
- Minor 64bit improvements. 2010-10-25, by Florian Pose
- Fixed TIMESPEC2NS() macro use. 2010-10-25, by Florian Pose
- Improved dc_user example. 2010-10-25, by Florian Pose
- Ignore .gcno files. 2010-10-25, by Florian Pose
- Implemented drive_no for command-line tool; binary base name is now a 2010-10-25, by Florian Pose
- Increased AL state change timeout to 5 s. 2010-10-25, by Florian Pose
- Output IDN configuration as part of 'ethercat config -v'. 2010-10-24, by Florian Pose
- merge. 2010-09-22, by Florian Pose
- Always write PDO mapping/assignment. 2010-09-21, by Florian Pose
- Merge. 2010-09-16, by Florian Pose
- Set master stats colum with to 6. 2010-08-05, by Florian Pose
- Rescan command. 2010-09-16, by Florian Pose
- Clear configuration on deactivation; also in userspace. 2010-09-16, by Florian Pose
- Free all userspace library objects on releasing master. 2010-09-16, by Florian Pose
- Read at least 64 words, when SII size determination failed. 2010-09-22, by Florian Pose
- Minor: Improved SII debugging. 2010-09-22, by Florian Pose
- Fixed frame statistics overflow (to be verified). 2010-07-31, by Florian Pose
- Dropped '0x' before process data bytes to fit on an 80 col console. 2010-07-31, by Florian Pose
- TODO. 2010-07-31, by Florian Pose
- Always set drive_no to zero in ethercat tool (TBC). 2010-07-23, by Florian Pose
- Added drive_no parameter to SoE layer. 2010-07-20, by Florian Pose
- Improved SII debugging. 2010-07-13, by Florian Pose
- TODO for 1.5. 2010-07-06, by Florian Pose
- Implemented delimiter for cstruct command. 2010-07-06, by Florian Pose
- Output correct errno when transferring SDOs via command-line interface. 2010-07-06, by Florian Pose
- Implemented ecrt_master_read_idn() and ecrt_master_write_idn() in kernel space. 2010-07-06, by Florian Pose
- Ignore files ending with ~. 2010-06-06, by Florian Pose
- Incremented ioctl interface version; Minor changes. 2010-06-06, by Florian Pose
- Added state parameter to ecrt_slave_config_idn(). 2010-06-06, by Florian Pose
- TODO. 2010-06-06, by Florian Pose
- merge 2010-06-06, by Florian Pose
- Minor change. 2010-06-06, by Florian Pose
- TODO. 2010-06-03, by Florian Pose
- Fixed bug that caused the configuration not to be cleared when reserved but 2010-06-02, by Florian Pose
- Minor change. 2010-06-02, by Florian Pose
- merge. 2010-06-02, by Florian Pose
- TODO. 2010-06-01, by Florian Pose
- Fixed NULL pointer dereference on request error in RTAI example. 2010-06-01, by Florian Pose
- Introduced configure switch --enable-regalias for enabling reading alias 2010-05-25, by Florian Pose
- Added debug output for ecrt_slave_config_dc(). 2010-05-25, by Florian Pose
- TODO. 2010-06-02, by Florian Pose
- Fixed format specifiers. 2010-05-20, by Florian Pose
- Made send_interval variable an unsigned int; fixed format specifiers for 2010-05-20, by Florian Pose
- Added r8169 port based on 2.6.31.13 by M. Lüscher. 2010-05-20, by Florian Pose
- Fixed compiler warning. 2010-05-20, by Florian Pose
- Fixed NULL pointer dereference caused by wrong usage of DBG macro. 2010-05-06, by Florian Pose
- TODO. 2010-05-06, by Florian Pose
- Write DC system time offsets right after slave scan / config change. Wait for DC clock discipline. 2010-05-06, by Florian Pose
- Minor change. 2010-05-06, by Florian Pose
- Minor. 2010-05-06, by Florian Pose
- Minor. 2010-05-06, by Florian Pose
- Improved syslog macros. 2010-05-03, by Florian Pose
- TODO. 2010-05-03, by Florian Pose
- TODO 2010-05-02, by Florian Pose
- Fixed AL state display in command-line tool. 2010-04-30, by Florian Pose
- SoE documentation. 2010-04-30, by Florian Pose
- Updated master state graph. 2010-04-29, by Florian Pose
- Graph font declaration in header. 2010-04-29, by Florian Pose
- Fixed possible bug in EoE code: Only restart EoE process, when it was running 2010-04-27, by Florian Pose
- Added ecrt_master_read_idn() and ecrt_master_write_idn() to read/write SoE 2010-04-27, by Florian Pose
- TODO. 2010-04-27, by Florian Pose
- Fixed errno usage in user library. 2010-04-27, by Florian Pose
- TODO. 2010-04-27, by Florian Pose
- Introduced effective_alias variable to separate reg12 alias from SII alias. 2010-04-23, by Florian Pose
- Removed TIOCSSERIAL because it doesn't make sense for virtual tty interfaces. 2010-04-20, by Florian Pose
- Added missing code documentation. 2010-04-19, by Florian Pose
- Renamed sdo_injecton_timeout to ext_injection_timeout. 2010-04-19, by Florian Pose
- Better use enums in SoE code. 2010-04-19, by Florian Pose
- Moved ABS() macro to globals. 2010-04-19, by Florian Pose
- Completed code documentation for ectty. 2010-04-19, by Florian Pose
- TODO. 2010-04-19, by Florian Pose
- Documented fsm_foe members and removed unused variables. 2010-04-16, by Florian Pose
- Added e1000 driver for 2.6.27. 2010-04-15, by Florian Pose
- Fixed warning. 2010-04-15, by Florian Pose
- Added r8169 driver for 2.6.27 and 2.6.31. 2010-04-15, by Florian Pose
- Removed printk(). 2010-04-15, by Florian Pose
- Use ec_datagram_zero() wherever possible. 2010-04-15, by Florian Pose
- TODO. 2010-04-15, by Florian Pose
- TODO. 2010-04-15, by Florian Pose
- Fixed segfault in reg_read when no datatype is specified. 2010-04-15, by Florian Pose
- Added debugging output for result of register request. 2010-04-15, by Florian Pose
- Added api doc. 2010-04-14, by Florian Pose
- Output hex values in ethercat xml. 2010-04-07, by Florian Pose
- Improved DC tome offset calculation: 2010-03-29, by Florian Pose
- Implemented sign-and-magnitude integer types. 2010-03-29, by Florian Pose
- TODO. 2010-03-29, by Florian Pose
- Included futher AL status code messages. 2010-03-29, by Florian Pose
- TODO. 2010-03-29, by Florian Pose
- Removed unnecessary kernel header inclusion. 2010-03-25, by Florian Pose
- Added bootstrap call to INSTALL. 2010-03-22, by Florian Pose
- Minor fix. 2010-03-19, by Florian Pose
- Improved SoE statemachine error output. 2010-03-19, by Florian Pose
- Removed tabs. 2010-03-19, by Florian Pose
- Removed tabs. 2010-03-19, by Florian Pose
- Minor fix. 2010-03-19, by Florian Pose
- Included list of common SoE error messages. 2010-03-19, by Florian Pose
- TODO. 2010-03-19, by Florian Pose
- Omit newline on octet_string output. 2010-03-19, by Florian Pose
- TODO. 2010-03-19, by Florian Pose
- Added missing queue_external_datagram(); removed tabs. 2010-03-19, by Florian Pose
- Improved SoE command help. 2010-03-11, by Florian Pose
- Implemented a bunch of CANopen data types for the command-line tool. 2010-03-11, by Florian Pose
- Added getSingleMasterIndex() for command-line tool. 2010-03-11, by Florian Pose
- Open master device as late as possible. 2010-03-11, by Florian Pose
- Implemented SoE IDN parser for strings like 'P-0-0150'; moved data type 2010-03-11, by Florian Pose
- Fixed string argument for soe_write. 2010-03-09, by Florian Pose
- Fixed fragmented SoE write. 2010-03-09, by Florian Pose
- Implemented SoE write fragmenting. 2010-03-09, by Florian Pose
- Implemented SoE fragmented reading. 2010-03-09, by Florian Pose
- 64 bit frame statistics. 2010-03-09, by Florian Pose
- Implemented ecrt_slave_config_idn() for user-space library. 2010-03-09, by Florian Pose
- Documented idn parameter. 2010-03-09, by Florian Pose
- Ignore doxygen output. 2010-03-09, by Florian Pose
- TODO. 2010-03-09, by Florian Pose
- Improved frame statistics output again. 2010-03-09, by Florian Pose
- Output tx errors and tx rate in byte/s. 2010-03-09, by Florian Pose
- Fixed clearing frame statistics on link down. 2010-03-09, by Florian Pose
- TODO. 2010-03-08, by Florian Pose
- Clear frame statistics on link loss. 2010-03-08, by Florian Pose
- Improved frame statistics output. 2010-03-08, by Florian Pose
- Fixed frame statistics. 2010-03-08, by Florian Pose
- Frame statistics in 'ethercat master' output. 2010-03-07, by Florian Pose
- Fixed device file name output on ioctl mismatch. 2010-03-07, by Florian Pose
- Fixed segfault - Initialize SoE request properly. 2010-03-07, by Florian Pose
- Removed unused variable frames_timed_out. 2010-03-07, by Florian Pose
- TODO. 2010-03-06, by Florian Pose
- TODO. 2010-03-05, by Florian Pose
- TODO. 2010-03-05, by Florian Pose
- Added ecrt_slave_config_idn() method to store SoE IDN configurations. 2010-03-05, by Florian Pose
- Added ec_soe_request_copy() method. 2010-03-05, by Florian Pose
- Minor: Removed unnecessary include. 2010-03-05, by Florian Pose
- TODO. 2010-03-05, by Florian Pose
- Fixed reading error code from write response. 2010-03-05, by Florian Pose
- Fixed returning SoE error code. 2010-03-05, by Florian Pose
- Fixed SoE opcode determination. 2010-03-05, by Florian Pose
- Implemented SoE write state machine and soe_write command. 2010-03-05, by Florian Pose
- TODO. 2010-03-05, by Florian Pose
- Sourced out data type handling into an own class. 2010-03-05, by Florian Pose
- Overloaded throwCommandException(). 2010-03-05, by Florian Pose
- Fixed memory allocation while lock is held. Thanks to Esben Haabendal. 2010-03-03, by Florian Pose
- Typo. 2010-03-01, by Florian Pose
- Implemented reading Sercos-over-EtherCAT services. To be continued... 2010-03-01, by Florian Pose
- Reset AL states on link down. 2010-02-26, by Florian Pose
- Fixed compiler warning. 2010-02-25, by Florian Pose
- Fixed endless loop if negative master index range ends at zero. 2010-02-25, by Florian Pose
- Improved multi-master capabilities of ethercat tool. 2010-02-24, by Florian Pose
- Multi-master support for command-line tool. The --master option supports 2010-02-24, by Florian Pose
- Minor changes in configure output. 2010-02-23, by Florian Pose
- Use kernel's modules_install target, instead of building our own. Attention: 2010-02-23, by Florian Pose
- Improved output when PDO assignment/mapping fails. 2010-02-23, by Florian Pose
- Introduced ec_datagram_print_state() method and used it at all places where 2010-02-23, by Florian Pose
- merge 2010-02-23, by Florian Pose
- TODO 2010-02-23, by Florian Pose
- Avoid compiler warning. 2010-02-22, by Florian Pose
- Added e100 to specfile config. 2010-02-17, by Florian Pose
- merge 2010-02-17, by Florian Pose
- Improved spec file. 2010-02-17, by Florian Pose
- merge 2010-02-17, by Florian Pose
- Increased default number of masters to 32. 2010-02-16, by Florian Pose
- merge 2010-02-17, by Florian Pose
- Added e100 driver for 2.6.31. 2010-02-17, by Florian Pose
- Removed installation of symvers file, because it makes no sense when 2010-02-17, by Florian Pose
- Added spec file for building an RPM package. 2010-02-16, by Florian Pose
- Improved handling and installation of the modules' symbol versions. 2010-02-16, by Florian Pose
- Replaced deprecated init_MUTEX in tty code. 2010-02-16, by Florian Pose
- Added missing serial.c to dist. 2010-02-16, by Florian Pose
- Added 8139too for 2.6.31 to distribution. 2010-02-16, by Florian Pose
- Fixed master/Makefile.am in case Module.symvers does not exist. 2010-02-15, by Florian Pose
- Removed tabulators. 2010-02-05, by Florian Pose
- Merge 2010-02-02, by Martin Troxler
- Merge 2010-02-02, by Martin Troxler
- Support of virtual sync managers 2010-01-26, by Dominik Staubli
- Merged 2010-01-31, by Martin Troxler
- Merge 2010-01-21, by Dominik Staubli
- Domain datagram working counter calculation bugfix: increment expected wc for a given slave & direction just once for each datagram 2010-01-21, by Dominik Staubli
- Allow multiple open() calls to tty devices. 2010-02-02, by Florian Pose
- Minor change. 2010-01-26, by Florian Pose
- Include termios.h from ectty.h. 2010-01-26, by Florian Pose
- Reduced CoE timeouts to 1000 ms. 2010-01-26, by Florian Pose
- Improved dictionary timeout messages. 2010-01-26, by Florian Pose
- Improved CoE error messages. 2010-01-26, by Florian Pose
- Do not output CoE retries. 2010-01-26, by Florian Pose
- Added variable vor master module arguments. 2010-01-26, by Florian Pose
- Pass initial cflag to device-specific implementation in constructor. 2010-01-25, by Florian Pose
- Fixed segfault if creation of TTY devices fails. 2010-01-25, by Florian Pose
- Callback set via own structure. 2010-01-25, by Florian Pose
- Sorted methods. 2010-01-25, by Florian Pose
- Named serial ports. 2010-01-22, by Florian Pose
- Implemented all 2 ports of EL6002. 2010-01-22, by Florian Pose
- Also accept ids 2-port serial slave. 2010-01-22, by Florian Pose
- Implemented setting of baud rate, data frame and RTS/CTS. 2010-01-22, by Florian Pose
- Request initial configuration on tty open. 2010-01-22, by Florian Pose
- Check EL600x frame data configuration. 2010-01-22, by Florian Pose
- Passing tty cflag to serial implementation. 2010-01-21, by Florian Pose
- Basic configuration for tty. 2010-01-21, by Florian Pose
- Merged 2010-01-19, by Martin Troxler
- removed tabulators 2010-01-19, by Martin Troxler
- Silently use alias from SII if reading it from register 0x0012 fails 2010-01-11, by Martin Troxler
- Fixed name of byte transmission time define; changed coding style. 2010-01-19, by Florian Pose
- Disable use of hrtimer for scheduling by default. Does not work on some PPC targets. 2010-01-19, by Florian Pose
- Improved installation chapter. 2010-01-13, by Florian Pose
- Auto-generate architecture pdf. 2010-01-13, by Florian Pose
- TODO for 1.5.0. 2010-01-13, by Florian Pose
- merge stable-1.4 2010-01-13, by Florian Pose
- Added hg ignores. 2009-10-19, by Florian Pose
- Closed branch. kernel2.6 2010-01-12, by Florian Pose
- Closed branch. kernel-2.4 2010-01-12, by Florian Pose
- Closed branch. 1.4-foe 2010-01-12, by Florian Pose
- merge 2010-01-12, by Florian Pose
- update tags 2010-01-12, by convert-repo
- user-Implementation aus 2.4er Branch entfernt. kernel-2.4 2005-12-16, by Florian Pose
- Alter Hauptzweig ist jetzt Zweig branches/kernel-2.4 kernel-2.4 2005-12-16, by Florian Pose
- Fixed lsec for terminals that do not support getting the terminal width. stable-1.3 2008-10-02, by Florian Pose
- merge -r1459:1464,1472,1476 trunk: Added e100 driver. stable-1.3 2008-10-02, by Florian Pose
- merge -r1464:1467 trunk: Removed unstable forcedeth and e100. stable-1.3 2008-10-02, by Florian Pose
- merge -c1374 trunk: Missing spin_lock_irqrestore() protection. stable-1.3 2008-07-28, by Florian Pose
- merge -c1371 trunk: Reduced watchdog executions in e1000. stable-1.3 2008-07-28, by Florian Pose
- Version 1.3.3-pre. stable-1.3 2008-04-30, by Florian Pose
- Added e1000 driver for kernel 2.6.22. stable-1.3 2008-04-30, by Florian Pose
- Sync manager size is always the total size of the assigned Pdos, if stable-1.3 2008-04-30, by Florian Pose
- Output domain data via sysfs. stable-1.3 2008-04-29, by Florian Pose
- merge -r974:979 trunk -> branches/stable-1.3 (lsec fix). stable-1.3 version-1.3.2 2007-10-05, by Florian Pose
- Removed mydist target. stable-1.3 2007-10-04, by Florian Pose
- merge -r972:974 trunk -> branches/stable-1.3 (mapping source, new slave info file) stable-1.3 2007-10-04, by Florian Pose
- Removed xmldev.o from ec_master.o dependencies. stable-1.3 2007-10-03, by Florian Pose
- Added fsm_coe_map.[ch] to dist. stable-1.3 2007-10-03, by Florian Pose
- merge -r931:HEAD svn://yak/vol/projekte/msr_messen_steuern_regeln/ethercat/rep/trunk . stable-1.3 2007-10-03, by Florian Pose
- MERGE -r908:HEAD svn://yak/vol/projekte/msr_messen_steuern_regeln/ethercat/rep/trunk (1.3.1 changes) stable-1.3 2007-09-13, by Florian Pose
- MERGE trunk -r770:907 -> branches-1.3 (1.3 changes) stable-1.3 2007-08-10, by Florian Pose
- Added stable-1.3 branch. stable-1.3 2007-08-10, by Florian Pose
- Removed unwanted label. stable-1.2 2007-02-13, by Florian Pose
- Generate ChangeLog from whole repository in stable-1.2 branch. stable-1.2 2007-02-13, by Florian Pose
- MERGE -r759:762 trunk -> branches/stable-1.2 (release 1.2, part two). stable-1.2 2007-02-13, by Florian Pose
- MERGE -r688:759 trunk -> branches/stable-1.2 (release 1.2, part one). stable-1.2 2007-02-13, by Florian Pose
- Re-added sysconfig file. stable-1.2 2007-02-13, by Florian Pose
- Temporarily removed sysconfig script. stable-1.2 2007-02-13, by Florian Pose
- Removed traces of XML daemon from stable branch. stable-1.2 2007-02-13, by Florian Pose
- Created branch stable-1.2. stable-1.2 2007-02-13, by Florian Pose
- MERGE trunk -r686:687 -> branches/stable-1.1 (ChangeLog) stable-1.1 2006-11-07, by Florian Pose
- MERGE trunk -r682:685 -> branches/stable-1.1 (Fixed dist files, source docs, version 1.1.1) stable-1.1 2006-11-07, by Florian Pose
- MERGE trunk -r588:681 -> branches/stable-1.1 (Bugfixes, Ack behaviour, CoE via Sysfs, PDO ranges, 2.6.17 support, improved autotools, documentation) stable-1.1 2006-11-07, by Florian Pose
- MERGE trunk -r573:587 -> branches/stable-1.1 (race, bootstrap, mailbox bugfix, debug interface switch) stable-1.1 2006-10-13, by Florian Pose
- MERGE trunk -r571:572 -> branches/stable-1.1 (INSTALL file) stable-1.1 2006-09-28, by Florian Pose
- MERGE trunk -r569:570 -> branches/stable-1.1 (doc) stable-1.1 2006-09-27, by Florian Pose
- MERGE trunk -r564:568 -> branches/stable-1.1 (doc, master output, atomic flag) stable-1.1 2006-09-26, by Florian Pose
- MERGE trunk -r556:562 -> branches/stable-1.1 (new doc) stable-1.1 2006-09-25, by Florian Pose
- MERGE trunk -r 554:555 -> branches/stable-1.1 (--with-linux fix) stable-1.1 2006-09-25, by Florian Pose
- MERGE trunk -r 552:553 -> branches/stable-1.1 (--with-linux, mydist) stable-1.1 2006-09-25, by Florian Pose
- MERGE trunk -r546:550 -> branches/stable-1.1 (Bugfix, Autotools, still w/o XML) stable-1.1 2006-09-25, by Florian Pose
- MERGE: trunk -r543:544 -> branches/stable-1.1 (Indentation init script) stable-1.1 2006-09-25, by Florian Pose
- MERGE trunk -r537:540 -> branches/stable-1.1 (coupler info in sysfs, lines in lsec) stable-1.1 2006-09-11, by Florian Pose
- MERGE trunk -r534:537 -> branches/stable-1.1 (INSTALL file, Version info) stable-1.1 2006-09-08, by Florian Pose
- MERGE trunk -r528:534 -> branches/stable-1.1 (master version in Doxyfile) stable-1.1 2006-09-01, by Florian Pose
- MERGE trunk -r516:527 -> branches/stable-1.1 (jiffies, bugfixes, pdo defines) stable-1.1 2006-09-01, by Florian Pose
- Changes extra version to "stable". stable-1.1 2006-08-09, by Florian Pose
- MERGE trunk -r513:515 -> branches/stable-1.1 (Missing code docs) stable-1.1 2006-08-09, by Florian Pose
- MERGE trunk -r494:513 -> branches/stable-1.1 (SDO configuration, bugfixes, EoE frame rates) stable-1.1 2006-08-09, by Florian Pose
- MERGE trunk -r463:494 -> branches/stable-1.1 (Version 1.1) stable-1.1 2006-08-03, by Florian Pose
- Created stable-1.1 branch for new interfaces. stable-1.1 2006-07-13, by Florian Pose
- Removed todo line. 1.4-foe 2009-01-26, by Florian Pose
- Fixed seg_size parameter when processing an CoE Upload Segment Response. 1.4-foe 2009-01-20, by Florian Pose
- Introduced configured_[tr]x_mailbox(size|offset) members of slave. 1.4-foe 2009-01-20, by Florian Pose
- merge -c1617 branches/stable-1.4 1.4-foe 2009-01-20, by Florian Pose
- Implemented going to bootstrap state BOOT. 1.4-foe 2009-01-19, by Florian Pose
- Improved FoE. 1.4-foe 2009-01-19, by Florian Pose
- Included FoE patch from Olav Zarges. 1.4-foe 2009-01-19, by Florian Pose
- Created FoE branch for 1.4. 1.4-foe 2009-01-19, by Florian Pose
- Version 1.4.1. stable-1.4 2009-06-22, by Florian Pose
- ec_master.symvers. stable-1.4 2009-06-19, by Florian Pose
- Added r8169 driver for 2.6.28. stable-1.4 2009-06-19, by Florian Pose
- Added distfiles for r8169. stable-1.4 2009-06-19, by Florian Pose
- Added r8169 driver for kernel 2.6.24. stable-1.4 2009-06-19, by Florian Pose
- Sysfs device creation for kernels >= 2.6.26. stable-1.4 2009-06-19, by Florian Pose
- Ignores for recent kernel versions. stable-1.4 2009-06-19, by Florian Pose
- Doc: Features, installation. stable-1.4 2009-02-04, by Florian Pose
- NEWS. stable-1.4 2009-01-26, by Florian Pose
- merge -c1622 branches/1.4-foe: Fixed seg_size parameter when processing an CoE Upload Segment Response. stable-1.4 2009-01-26, by Florian Pose
- Added octet_string as an SDO data type. stable-1.4 2009-01-19, by Florian Pose
- Fixed datagram cleaning. stable-1.4 2009-01-19, by Florian Pose
- Version 1.4.0. stable-1.4 2008-12-29, by Florian Pose
- Added missing doxygen docs. stable-1.4 2008-12-29, by Florian Pose
- INSTALL, README. stable-1.4 2008-12-29, by Florian Pose
- TODO. stable-1.4 2008-12-29, by Florian Pose
- merge -c1501 trunk: ecrt_domain_size() const. stable-1.4 2008-12-29, by Florian Pose
- Output vendor Id in hex. stable-1.4 2008-12-29, by Florian Pose
- Output ioctl() debugging in hex. stable-1.4 2008-12-29, by Florian Pose
- Fixed spelling of EtherCAT terms. stable-1.4 2008-12-29, by Florian Pose
- Changed licence headers to avoid conflicts with the GPL; restricted licence to GPLv2 only. stable-1.4 2008-12-29, by Florian Pose
- Fixed e1000 ring bug. stable-1.4 2008-12-29, by Florian Pose
- Ignores. stable-1.4 2008-12-29, by Florian Pose
- Removed bashisms from init script. stable-1.4 2008-12-29, by Florian Pose
- Reverted rtai example changes. stable-1.4 2008-12-29, by Florian Pose
- TODO. stable-1.4 2008-12-29, by Florian Pose
- FEATURES. stable-1.4 2008-11-26, by Florian Pose
- NEWS. stable-1.4 2008-11-25, by Florian Pose
- Fixed kernel oops concerning slave configuration detaching. stable-1.4 2008-11-25, by Florian Pose
- Added ec_sdo_request_copy(). stable-1.4 2008-11-25, by Florian Pose
- Fixed logging output typo. stable-1.4 2008-11-06, by Florian Pose
- New profiling measured. stable-1.4 2008-11-05, by Florian Pose
- merge -c1578 trunk: Debug if. stable-1.4 2008-11-05, by Florian Pose
- Debug interface improvements. stable-1.4 2008-11-05, by Florian Pose
- Ignore *.nls. stable-1.4 2008-11-05, by Florian Pose
- Switched master phases and module; removed behavior. stable-1.4 2008-11-05, by Florian Pose
- Nomenclature and index. stable-1.4 2008-11-05, by Florian Pose
- udev rule for writing access. stable-1.4 2008-11-05, by Florian Pose
- Debug interfaces. stable-1.4 2008-11-05, by Florian Pose
- Fixed quotation. stable-1.4 2008-11-05, by Florian Pose
- Dot spacing. stable-1.4 2008-11-05, by Florian Pose
- merge -r1545:1547 trunk: Removed ldots; FIXME, TODO; typos. stable-1.4 2008-11-05, by Florian Pose
- merge -c1545 trunk: Capital. stable-1.4 2008-11-05, by Florian Pose
- merge -c1544 trunk: Fixed missing paren. stable-1.4 2008-11-05, by Florian Pose
- merge -c1543 trunk: Prcess data; slave configuration + attachment; typos. stable-1.4 2008-11-05, by Florian Pose
- merge -c1542 trunk: Avoided 'you'. stable-1.4 2008-11-05, by Florian Pose
- merge -c1541 trunk: Userspace applications (excerpts). stable-1.4 2008-11-05, by Florian Pose
- merge -c1540 trunk: Realtime->Application. stable-1.4 2008-11-05, by Florian Pose
- merge -c1539 trunk: Removed unnecessary modules; renamed references. stable-1.4 2008-11-05, by Florian Pose
- merge -c1519 trunk: *space without whitespace; licensing; userspace interfaces. stable-1.4 2008-11-05, by Florian Pose
- merge -c1513 trunk: sec:ecrt is a chapter; sec:eoeimp -> sec:eoe, ... stable-1.4 2008-11-05, by Florian Pose
- merge -c1442 trunk: Udev docs. stable-1.4 2008-11-05, by Florian Pose
- Fixed WC calculation for multiple datagrams. stable-1.4 2008-11-05, by Florian Pose
- Fixed EXTRA_DIST. stable-1.4 2008-10-21, by Florian Pose
- Removed branch information. stable-1.4 2008-10-17, by Florian Pose
- Moved globals.h to noinst_HEADERS. stable-1.4 2008-10-17, by Florian Pose
- NEWS. stable-1.4 2008-10-17, by Florian Pose
- Fixed jace in jiffies timeout calculation. stable-1.4 2008-10-17, by Florian Pose
- Fixed race concerning ec_slave_config_state->operational. stable-1.4 2008-10-17, by Florian Pose
- TODO. stable-1.4 2008-10-02, by Florian Pose
- Version 1.4.0-rc3. stable-1.4 2008-10-02, by Florian Pose
- merge -c1477 trunk: Moved threads to kthread interface. stable-1.4 2008-10-02, by Florian Pose
- merge -c1474 trunk: Added missing header. stable-1.4 2008-10-02, by Florian Pose
- merge -c1473 trunk: Avoided using #ifdef inside a macro. stable-1.4 2008-10-02, by Florian Pose
- Removed some more old driver relics. stable-1.4 2008-09-30, by Florian Pose
- Removed e100 relicts. stable-1.4 2008-09-30, by Florian Pose
- merge -r1464:1467 trunk: Removed forcedeth, e100 and r8169. stable-1.4 2008-09-30, by Florian Pose
- NEWS for -c1455. stable-1.4 2008-09-29, by Florian Pose
- merge -c1454 trunk: Missing up(). stable-1.4 2008-09-29, by Florian Pose
- merge -c1452 trunk: Headers. stable-1.4 2008-09-24, by Florian Pose
- TODO. stable-1.4 2008-09-24, by Florian Pose
- merge -r1446:1448 trunk: Plugfest6 fixes. stable-1.4 2008-09-24, by Florian Pose
- Fixed nodist causing master files not to be distributed... stable-1.4 2008-08-27, by Florian Pose
- Version 1.4.0-rc2. stable-1.4 2008-08-27, by Florian Pose
- merge -c1430 trunk: NEWS. stable-1.4 2008-08-27, by Florian Pose
- merge -r1424:1428 trunk: TODO, docs. stable-1.4 2008-08-27, by Florian Pose
- merge -c1422 trunk: Fixed output spacing. stable-1.4 2008-08-13, by Florian Pose
- Stable. stable-1.4 2008-08-13, by Florian Pose
- Created branch stable-1.4. stable-1.4 2008-08-13, by Florian Pose
- MERGE trunk -r492:493 -> branches/stable-1.0 (Init script identation. stable-1.0 2006-08-03, by Florian Pose
- MERGE trunk -r490:491 -> branches/stable-1.0 (Init script bug) stable-1.0 2006-08-02, by Florian Pose
- MERGE trunk -r452:489 -> stable-1.0 (datagrams, bugfixes, EEPROM info, idle mode) stable-1.0 2006-08-02, by Florian Pose
- MERGE trunk -r450:451 -> branches/stable-1.0 (docs) stable-1.0 2006-06-26, by Florian Pose
- MERGE trunk -r 448:449 -> branches/stable-1.0 (bridge gateway) stable-1.0 2006-06-26, by Florian Pose
- MERGE trunk -r428:447 -> branches/stable-1.0 (Complete EEPROM data, unloading buxfix, variable data, bridging) stable-1.0 2006-06-26, by Florian Pose
- Consistent example configuration files. stable-1.0 2006-05-29, by Florian Pose
- MERGE -r361:425 trunk -> branches/stable-1.0: EoE, License, State machines. stable-1.0 2006-05-29, by Florian Pose
- MERGE trunk -r355:360 -> branches/stable-1.0 (Doxygen, INSTALL, and GPLv2) stable-1.0 2006-04-24, by Florian Pose
- MERGE trunk -r354:355 -> branches/stable-1.0 (version numbers) stable-1.0 2006-04-20, by Florian Pose
- (Re-) Creating stable-1.0 branch stable-1.0 2006-04-20, by Florian Pose
- TTY example: Auto-create multiple handlers. 2010-01-08, by Florian Pose
- Fixed function call. 2010-01-08, by Florian Pose
- TTY: Sourced serial device functions out into serial.c/serial.h. 2010-01-08, by Florian Pose
- Removed tabulators. 2010-01-08, by Florian Pose
- Merged Komax changes. 2010-01-08, by Florian Pose
- Merged 2010-01-04, by Martin Troxler
- Merged 2010-01-04, by Matthias Luescher
- Fixed sdo request handling in case of failure 2010-01-04, by Matthias Luescher
- generic device driver checks link up/down 2010-01-04, by Martin Troxler
- Merged 2009-12-27, by Martin Troxler
- merged 2009-12-18, by Martin Troxler
- undone changes of revision 1547: Abort SDO/FOE requests when slave is in INIT 2009-12-18, by Martin Troxler
- fix build for recent kernel versions (tested with 2.6.31) 2009-12-17, by Matthias Luescher
- removed busy loop in idle thread 2009-12-17, by Martin Troxler
- master FSM enables slave FSM 2009-12-15, by Martin Troxler
- use given send interval to limit SDO/FOE traffic 2009-12-15, by Martin Troxler
- removed obsolete datagram reinit in fsm_sii 2009-12-15, by Martin Troxler
- Postpone SDO request when slave is in INIT 2009-12-10, by Martin Troxler
- Moved FOE request queue and fsm into slaves 2009-12-01, by Martin Troxler
- Moved sdo request queue to slaves 2009-12-01, by Martin Troxler
- Implemented tty put_char and break_ctl callbacks for kernels newer than 2.6.26 2010-01-08, by Florian Pose
- Implemented ecrt_master() and ecrt_master_get_slave() in kernel space. 2010-01-07, by Florian Pose
- Fixed string length constant bug. 2010-01-07, by Florian Pose
- Removed 'Preliminary'. 2010-01-05, by Florian Pose
- Ignore documentation files. 2010-01-05, by Florian Pose
- Updated FEATURES. 2010-01-05, by Florian Pose
- Revision and date on every page. 2010-01-05, by Florian Pose
- Using rcsInfo; Documented generic Ethernet driver. 2010-01-05, by Florian Pose
- Updated TODO. 2009-12-14, by Florian Pose
- Merged changes by Martin Troxler. 2009-12-14, by Florian Pose
- ecrt_master_set_max_cycle_size: limit SDO traffic 2009-11-30, by Martin Troxler
- ec_print_data: show only the first 128 and the last 128 bytes of a data block 2009-11-30, by Martin Troxler
- Each slave got its own SDO state machine (faster handling of external SDO requests) 2009-11-26, by Martin Troxler
- Fixed SDO up/download kernel oops bug 2009-11-23, by Martin Troxler
- Merged changes from Martin Troxler. 2009-12-14, by Florian Pose
- Merge 2009-11-19, by Martin Troxler
- applied komax patch to version r1822 2009-11-19, by Martin Troxler
- Added README to dist. 2009-12-09, by Florian Pose
- Implemented reading direction of tty driver. 2009-12-09, by Florian Pose
- Fixed distribution of TTY example. 2009-12-02, by Florian Pose
- Send direction works! 2009-12-02, by Florian Pose
- Add ectty.h to dist. 2009-12-01, by Florian Pose
- Create tty. 2009-12-01, by Florian Pose
- Removed semaphore header. 2009-12-01, by Florian Pose
- TTY open and close. 2009-12-01, by Florian Pose
- Use own PFX for printk. 2009-12-01, by Florian Pose
- Interface management. 2009-12-01, by Florian Pose
- Register a TTY driver with one device. 2009-12-01, by Florian Pose
- Added tty example. 2009-12-01, by Florian Pose
- Install ec_tty module. 2009-11-30, by Florian Pose
- Base files for new TTY driver. 2009-11-30, by Florian Pose
- TODO. 2009-11-23, by Florian Pose
- Introduced mailbox/CoE defines; avoided duplicate code in CoE segmented 2009-11-21, by Florian Pose
- SDO segmented download. 2009-11-20, by Florian Pose
- Use net_device_ops also for EoE devices from 2.6.29 on. 2009-11-19, by Florian Pose
- Allow BITx types in XML output. 2009-11-17, by Florian Pose
- Fixed receiving multiple frames in generic device. 2009-11-09, by Florian Pose
- generic device receive buffer in heap. 2009-11-09, by Florian Pose
- Fixed bug in generic driver failing to create debug interfaces, because the 2009-11-05, by Florian Pose
- Init script and sysconfig file for generic Ethernet driver. 2009-11-05, by Florian Pose
- Generic driver net_device_ops for kernels < 2.6.29. 2009-11-05, by Florian Pose
- Print complete Ethernet frame during debug. 2009-11-05, by Florian Pose
- Bugfix: Unqueue datagram before destroying. 2009-10-29, by Florian Pose
- Later freeing of netdev. 2009-10-28, by Florian Pose
- Added missing newline. 2009-10-28, by Florian Pose
- Avoid zeroing mailbox datagram because of VoE handlers. 2009-10-28, by Florian Pose
- merge 2009-10-28, by Florian Pose
- Using snprintf for interface name. 2009-10-28, by Florian Pose
- merged e100 for 2.6.27. 2009-10-21, by Florian Pose
- Added e100 driver for 2.6.27. 2009-09-30, by Florian Pose
- TODO 2009-10-20, by Florian Pose
- Merge x86_64 fixes. 2009-10-19, by Florian Pose
- Avoid warnings on x86_64 platform. Thanks to Thomas Elste. 2009-10-19, by Florian Pose
- Implemented poll(); receiving on generic device also works. 2009-10-15, by Florian Pose
- Sending via generic device works. 2009-10-15, by Florian Pose
- Basic generic Ethernet device module. 2009-10-13, by Florian Pose
- Removed unused sysfs macros. 2009-10-13, by Florian Pose
- Fixed clearing slaves: Also clear external requests before. Thanks to Martin 2009-10-06, by Florian Pose
- TODO. 2009-08-27, by Florian Pose
- Added watchdog documentation. 2009-08-24, by Florian Pose
- DC synchrony monitoring methods. 2009-08-21, by Florian Pose
- Merge 2009-08-21, by Florian Pose
- Fixed SDO upload segment response for 10 bytes mailbox length (thanks to Joerg 2009-08-21, by Florian Pose
- TODO. 2009-08-20, by Florian Pose
- Implemented ecrt_master_deactivate() in userspace. 2009-08-20, by Florian Pose
- Added ecrt_master_deactivate() to remove the bus configuration. 2009-08-20, by Florian Pose
- TODO. 2009-08-18, by Florian Pose
- Switched from Subversion to Mercurial. 2009-08-13, by Florian Pose
- Ignore swp files. 2009-08-13, by Florian Pose
- Implemented CompleteAccess for SDO downloads. 2009-08-13, by Florian Pose
- Ignore m4 files. 2009-08-13, by Florian Pose
- Committed misteriously modified files... 2009-08-11, by Florian Pose
- Added .hgignore. 2009-08-11, by Florian Pose
- update tags 2009-08-11, by convert-repo
- Check for NULL pointer in ecdev_receive(). 2009-08-11, by Florian Pose
- Fixed setting watchdog intervals. 2009-08-06, by Florian Pose
- Minrt changes. 2009-08-04, by Florian Pose
- Output watchdog configuration in ethercat config. 2009-08-04, by Florian Pose
- DC documentation; new callback mechanism; cstruct 2009-08-04, by Florian Pose
- Fixed compiler error on --disable-eoe. 2009-08-04, by Florian Pose
- Added r8169 driver for 2.6.29. 2009-07-30, by Florian Pose
- Added 'ethercat cstruct' command to output PDO information in C language. 2009-07-29, by Florian Pose
- Re-added callback data pointer, because it is necessary for some applications. 2009-07-29, by Florian Pose
- Fixed typos. 2009-07-28, by Florian Pose
- TODO. 2009-07-28, by Florian Pose
- Improved bus information API. 2009-07-28, by Florian Pose
- Added watchdog configuration via application interface (thanks to J. Mohre). 2009-07-27, by Florian Pose
- Removed more tabulators. 2009-07-27, by Florian Pose
- Removed unwanted tabulators. 2009-07-27, by Florian Pose
- Fixed IRQ freeing bug in e100 drivers. 2009-07-16, by Florian Pose
- Added e100 for kernel 2.6.29, thanks to Andre Puschmann. 2009-07-15, by Florian Pose
- Minor: Removed unnecessary condition. 2009-07-15, by Florian Pose
- TODO 2009-07-15, by Florian Pose
- Fixed segfault on link change in e100 drivers. 2009-07-15, by Florian Pose
- Added semaphore header distinction in minimal example. 2009-07-13, by Florian Pose
- Improved the callback mechanism. 2009-07-13, by Florian Pose
- TODO. 2009-07-10, by Florian Pose
- Fixed SDO upload segment response (thanks to Christoph Peter). 2009-07-10, by Florian Pose
- Separated master requesting into open and reserve for userspace library. 2009-07-10, by Florian Pose
- TODO. 2009-07-10, by Florian Pose
- Reverted accidential checkin. 2009-07-10, by Florian Pose
- TODO. 2009-07-10, by Florian Pose
- Increased default buffer size for SDO uploads to 64k. 2009-07-09, by Florian Pose
- Zero mailbox datagram before sending. 2009-07-09, by Florian Pose
- Configure PDO sync managers even if no configuration has been applied. 2009-07-09, by Florian Pose
- Ignores. 2009-07-06, by Florian Pose
- EoE processing with kthread. 2009-06-30, by Florian Pose
- Output device opened/closed only on debug level 2. 2009-06-29, by Florian Pose
- Minor: Changed comment style. 2009-06-29, by Florian Pose
- EoE transmit retry; EoE warnings. 2009-06-26, by Florian Pose
- ethercat eoe command. 2009-06-26, by Florian Pose
- Debug statements with EC_DBG() in EoE code. 2009-06-26, by Florian Pose
- Minor: vendor/product with 8 hex digits. 2009-06-26, by Florian Pose
- TODO. 2009-06-24, by Florian Pose
- Ignore Module.markers. 2009-06-19, by Florian Pose
- merge -c1788 branches/stable-1.4: ec_master.symvers installation. 2009-06-19, by Florian Pose
- merge -c1787 branches/stable-1.4: Added r8169 driver for 2.6.28. 2009-06-19, by Florian Pose
- Redesign of EoE statemachine. 2009-06-18, by Florian Pose
- Added e100 driver for 2.6.28, thanks to Kim H. Madsen. 2009-06-16, by Florian Pose
- Implemented new network device operations for kernel 2.6.29, thanks to M. Goetze. 2009-06-16, by Florian Pose
- Added 8139too driver for 2.6.29, thanks to M. Goetze. 2009-06-16, by Florian Pose
- 'ethercat xml' creates <EtherCATInfoList> for more than one slave. 2009-06-16, by Florian Pose
- TODO. 2009-06-16, by Florian Pose
- Continue with next sync manager if reading the PDOs failed. 2009-06-15, by Florian Pose
- Fixed mailbox usage for slaves that do not provide sync manager 2009-06-15, by Florian Pose
- Minor. 2009-06-15, by Florian Pose
- Improved newlines in debug data output. 2009-06-15, by Florian Pose
- Improved error checking on SDO upload. 2009-06-15, by Florian Pose
- Minor fix in 'ethercat config' output. 2009-06-15, by Florian Pose
- EC_TIMEVAL2NANO() takes no pointer argument any more. 2009-05-15, by Florian Pose
- Added documentation. 2009-05-15, by Florian Pose
- TODO. 2009-05-13, by Florian Pose
- Minor: Added missing setfill(). 2009-05-08, by Florian Pose
- TODO. 2009-05-08, by Florian Pose
- TODO. 2009-05-08, by Florian Pose
- Added 8139too driver for 2.6.28, thanks to M. Goetze. 2009-05-07, by Florian Pose
- TODO. 2009-05-07, by Florian Pose
- Debugging output. 2009-05-07, by Florian Pose
- Slightly improved CoE download expedited request. 2009-05-07, by Florian Pose
- Fixed output of 'ethercat config'. 2009-05-07, by Florian Pose
- Output DC config in 'ethercat config'. 2009-05-07, by Florian Pose
- Added EC_IOCTL_APP_TIME. 2009-05-07, by Florian Pose
- Symbol versions; Makefile improvements. 2009-05-07, by Florian Pose
- Do not create m4 directory in bootstrap file. 2009-05-07, by Florian Pose
- Always set DC reference clock to OP. 2009-05-06, by Florian Pose
- TODO. 2009-05-06, by Florian Pose
- Ported examples to new DC configuration function. 2009-05-05, by Florian Pose
- Merged ecrt_slave_config_dc_assign_activate() and 2009-05-05, by Florian Pose
- Added scan_busy flag to ioctl(). 2009-05-05, by Florian Pose
- Fixed usage of IS_ERR() in FoE state machine. 2009-05-05, by Florian Pose
- Introduced EC_AL_STATE_CHANGE_TIMEOUT and set it to 2 s. 2009-05-05, by Florian Pose
- Unset idle flag while processing FoE requests. 2009-05-05, by Florian Pose
- Changed EC_MAX_SII_SIZE to 4096. 2009-05-05, by Florian Pose
- TODO. 2009-05-05, by Florian Pose
- Added ecrt_slave_sdo_upload() and ecrt_slave_sdo_download(). Thanks to 2009-05-05, by Florian Pose
- Added deummy Makefile.am for m4 directory. 2009-05-04, by Florian Pose
- Added m4 directory. 2009-05-04, by Florian Pose
- Replaced ecrt_slave_config_dc_cycle_times() and ecrt_slave_config_dc_shift_times() by ecrt_slave_config_dc_sync_signals(). 2009-05-04, by Florian Pose
- TODO. 2009-05-04, by Florian Pose
- Use application start time as a common reference for cyclic generation 2009-05-04, by Florian Pose
- Take ref clock address from dc_ref_clock pointer. 2009-05-04, by Florian Pose
- Separated application time from synchronizing reference clock. 2009-05-04, by Florian Pose
- Add empty m4 directory. 2009-05-04, by Florian Pose
- m4 macro dir. 2009-04-30, by Florian Pose
- Fixed const char * comparison. 2009-04-30, by Florian Pose
- Set system time transmission delay during config. 2009-04-30, by Florian Pose
- Decimal transmission delay. 2009-04-30, by Florian Pose
- Moved fonts to graph begin. 2009-04-30, by Florian Pose
- TODO. 2009-04-30, by Florian Pose
- Transition->Transmission. 2009-04-30, by Florian Pose
- Transition delay calculation. TBC... 2009-04-30, by Florian Pose
- Modeline for vim > 7.0. 2009-04-29, by Florian Pose
- Updated command doc. 2009-04-29, by Florian Pose
- Added 'ethercat graph' command. 2009-04-29, by Florian Pose
- Bus topology calculation. 2009-04-29, by Florian Pose
- Measure port receive times. 2009-04-27, by Florian Pose
- Determine type of DC implementation (full or delay meas. only); update scan FSM graph. 2009-04-27, by Florian Pose
- TODO. 2009-04-24, by Florian Pose
- Replaced timeval by 64-bit EtherCAT time. 2009-04-24, by Florian Pose
- Added missing doc. 2009-04-24, by Florian Pose
- Output reference clock and application time in 'ethercat Master'. 2009-04-24, by Florian Pose
- DC example applications. 2009-04-23, by Florian Pose
- Userspace library implementation of DC functions. 2009-04-23, by Florian Pose
- DC shift time working. 2009-04-23, by Florian Pose
- Added shift times to api. 2009-04-23, by Florian Pose
- Separated sync_reference_clock() and sync_slave_clocks(). 2009-04-23, by Florian Pose
- Updated graph for slave configuration FSM. 2009-04-20, by Florian Pose
- Find DC reference clock. 2009-04-20, by Florian Pose
- Improved DC configuration. 2009-04-20, by Florian Pose
- Clear DC assignment after going to INIT. 2009-04-20, by Florian Pose
- Updated graph of slave configuration FSM. 2009-04-20, by Florian Pose
- Minor changes. 2009-04-20, by Florian Pose
- TODO. 2009-04-20, by Florian Pose
- Tested clearing slave list after link down; minor changes. 2009-04-20, by Florian Pose
- Output link state in 'ethercat master'. 2009-04-17, by Florian Pose
- Clear slave list on link down. 2009-04-17, by Florian Pose
- Added debug_level module parameter. debug_level is now unsigned int. 2009-04-17, by Florian Pose
- Removed unused variable. 2009-04-17, by Florian Pose
- Introduced DEBUG_IOCTL. 2009-04-17, by Florian Pose
- DC sync reference clock to application time. TBC... 2009-04-09, by Florian Pose
- Added 64-bit types to reg_write. 2009-04-09, by Florian Pose
- Introduced ecrt_master_sync() for synchronizing slave clocks to reference clock. 2009-04-09, by Florian Pose
- Output (fixed-size) hex value before decimal value. 2009-04-09, by Florian Pose
- DC cyclic operation and slave configuration. TBC... 2009-04-09, by Florian Pose
- Fixed uint64 width at reg_read. 2009-04-08, by Florian Pose
- Fixed 64-bit register reading. 2009-04-08, by Florian Pose
- reg_write with data types. 2009-04-08, by Florian Pose
- Renamed phy_ commands to reg_. 2009-04-08, by Florian Pose
- Data types for phy_read. 2009-04-08, by Florian Pose
- Check phy_request length for read operations, too! 2009-04-08, by Florian Pose
- Process working counter of phy_* commands. 2009-04-08, by Florian Pose
- Added 64-bit data access macros. 2009-04-08, by Florian Pose
- Fixed phy_write usage. 2009-04-08, by Florian Pose
- Read SDO entry access rights. 2009-04-08, by Florian Pose
- Fixed VoE ioctl(). 2009-04-07, by Florian Pose
- Improved phy debugging. 2009-04-07, by Florian Pose
- Reading more base information (incl. whether DC supported). 2009-04-07, by Florian Pose
- Removed IS_ERR() from minimal example. 2009-04-06, by Florian Pose
- Removed list of 1.4 changes from header file. 2009-04-06, by Florian Pose
- Fixed r8169 frame reception if NAPI is enabled. 2009-04-01, by Florian Pose
- TODO. 2009-03-19, by Florian Pose
- Warn if going to SAFEOP without configuration. 2009-03-19, by Florian Pose
- Complain about given arguments if none are required. 2009-03-19, by Florian Pose
- TODO. 2009-03-19, by Florian Pose
- Fixed SDO configuration via library. 2009-03-18, by Florian Pose
- Added 8139too driver for 2.6.27, thanks to M. Goetze. 2009-03-09, by Florian Pose
- Preparations to compile against 2.6.27. 2009-03-09, by Florian Pose
- Replaced single uint16_t by u16. 2009-03-09, by Florian Pose
- Ignore modules.order. 2009-03-09, by Florian Pose
- Fixed compile error in e1000 driver for 2.6.26. 2009-03-09, by Florian Pose
- TODO. 2009-02-24, by Florian Pose
- Updated features. 2009-02-24, by Florian Pose
- Improved and added license headers. 2009-02-24, by Florian Pose
- Fixed SDO upload via library. 2009-02-24, by Florian Pose
- Fixed SDO download via library. 2009-02-24, by Florian Pose
- Added e1000 driver for 2.6.26, thanks to M. Luescher. 2009-02-24, by Florian Pose
- Added 8139too for 2.6.26, thanks to M. Luescher. 2009-02-24, by Florian Pose
- Added missing distfiles for 8139too-2.6.25. 2009-02-24, by Florian Pose
- Added missing headers for newer GCC versions. 2009-02-24, by Florian Pose
- TODO. 2009-02-24, by Florian Pose
- Improved master licensing paragraph. Should be included in every file... 2009-02-18, by Florian Pose
- builddir and srcdir, tbc. 2009-02-04, by Florian Pose
- First version of r8169 driver. 2009-02-04, by Florian Pose
- Implemented SDO requests in userspace library. 2009-02-02, by Florian Pose
- Added ec_slave_config_find_sdo_request(). 2009-02-02, by Florian Pose
- Minor fix in VoE handler. 2009-02-02, by Florian Pose
- Fixed FoE request states. 2009-01-30, by Florian Pose
- Fixed usage of internal request states. 2009-01-30, by Florian Pose
- Allow the slave to not respond to the mailbox sync manager configuration 2009-01-27, by Florian Pose
- Added missing files to dist. 2009-01-27, by Florian Pose
- TODO. 2009-01-26, by Florian Pose
- Debug message. 2009-01-26, by Florian Pose
- Fixed spacing and comments. 2009-01-26, by Florian Pose
- Clear sync managers before configuration. 2009-01-26, by Florian Pose
- Added ecrt_master_slave(). 2009-01-26, by Florian Pose
- merge -c1635 branches/1.4-foe: Removed todo line. 2009-01-26, by Florian Pose
- merge -c1622 branches/1.4-foe: Fixed seg_size parameter when processing an CoE Upload Segment Response. 2009-01-26, by Florian Pose
- merge -c1621 branches/1.4-foe: Introduced configured_[tr]x_mailbox(size|offset) members of slave. 2009-01-26, by Florian Pose
- merge -c1619 branches/1.4-foe: Implemented going to bootstrap state BOOT. 2009-01-26, by Florian Pose
- merge -c1618 branches/1.4-foe: Improved FoE. 2009-01-26, by Florian Pose
- merge -c1616 branches/1.4-foe: Included FoE patch from Olav Zarges. 2009-01-26, by Florian Pose
- merge -c1617 branches/stable-1.4: Added octet_string as an SDO data type. 2009-01-26, by Florian Pose
- merge -c1614 branches/stable-1.4: Fixed datagram cleaning. 2009-01-26, by Florian Pose
- merge -c1610 branches/stable-1.4: Added missing doxygen docs. 2009-01-26, by Florian Pose
- merge -c1609 branches/stable-1.4: INSTALL, README. 2009-01-26, by Florian Pose
- TODO. 2009-01-26, by Florian Pose
- merge -c1606 branches/stable-1.4: Output vendor Id in hex. 2009-01-26, by Florian Pose
- merge -c1605 branches/stable-1.4: Output ioctl() debugging in hex. 2009-01-26, by Florian Pose
- merge -c1604 branches/stable-1.4: Fixed spelling of EtherCAT terms. 2009-01-26, by Florian Pose
- merge -c1603 branches/stable-1.4: Changed licence headers to avoid conflicts with the GPL; restricted licence to GPLv2 only. 2009-01-26, by Florian Pose
- merge -c1602 branches/stable-1.4: Fixed e1000 ring bug. 2009-01-26, by Florian Pose
- merge -c1601 branches/stable-1.4: Ignores. 2009-01-26, by Florian Pose
- merge -r1599:1600 branches/stable-1.4: Removed bashisms from init script. 2009-01-26, by Florian Pose
- TODO 2009-01-19, by Florian Pose
- Added 8139too for 2.6.25. 2009-01-13, by Florian Pose
- FEATURES. 2008-11-26, by Florian Pose
- Updated features. 2008-11-25, by Florian Pose
- merge -r1583:1593 branches/stable-1.4: Fixed detaching oops. 2008-11-25, by Florian Pose
- Allow disabling interrupts on e100, because they are enabled after hardware reset. 2008-11-20, by Florian Pose
- Fixed unprocessed interrupts in e100 driver. 2008-11-19, by Florian Pose
- Output debug message only on debug level > 0. 2008-11-18, by Florian Pose
- Included ecrt_voe_handler_read_nosync()-Patch by Mathias Weber. 2008-11-18, by Florian Pose
- Improved error case return codes of many functions. 2008-11-17, by Florian Pose
- Created backend versions of all API functions returing a pointer; using 2008-11-17, by Florian Pose
- Fixed generation of unnecessary software interrupt in e100 driver. 2008-11-06, by Florian Pose
- merge -c1582 branches/stable-1.4: Typo. 2008-11-06, by Florian Pose
- Typo. 2008-11-05, by Florian Pose
- Improved new debug interfaces again. 2008-11-05, by Florian Pose
- New debug interfaces docs. 2008-11-05, by Florian Pose
- merge -r1566:1573 branches/stable-1.4: Documentation. 2008-11-05, by Florian Pose
- Create debug interface with address of physical device on attachment. 2008-11-05, by Florian Pose
- merge -c1554 branches/stable-1.4: Fixed WC calculation for multiple datagrams. 2008-11-05, by Florian Pose
- Output corrupted frame reasons. 2008-11-05, by Florian Pose
- Added AM_PROG_CC_C_O. 2008-10-28, by Florian Pose
- TODO. 2008-10-23, by Florian Pose
- Removed fix setting of device name to 'ec0'. 2008-10-22, by Florian Pose
- Userlib. 2008-10-22, by Florian Pose
- VoE handlers. 2008-10-22, by Florian Pose
- FIXME, TODO; typos. 2008-10-22, by Florian Pose
- Removed ldots 2008-10-22, by Florian Pose
- Capital. 2008-10-22, by Florian Pose
- Fixed missing paren. 2008-10-22, by Florian Pose
- Prcess data; slave configuration + attachment; typos. 2008-10-22, by Florian Pose
- Avouded 'you'. 2008-10-22, by Florian Pose
- Userspace applications. 2008-10-22, by Florian Pose
- Realtime->Application. 2008-10-21, by Florian Pose
- Removed unnecessary modules; renamed references. 2008-10-21, by Florian Pose
- Wrapped c function in 'extern "C"' to make the library usable in C++ 2008-10-21, by Florian Pose
- Improved LGPL headers. 2008-10-21, by Florian Pose
- Build examples by default. 2008-10-21, by Florian Pose
- merge -c1534 branches/stable-1.4: Fixed EXTRA_DIST. 2008-10-21, by Florian Pose
- Fixed page fault handler. 2008-10-21, by Florian Pose
- Differences kernel/user. 2008-10-20, by Florian Pose
- Completed library. 2008-10-20, by Florian Pose
- Added userspace timing. 2008-10-20, by Florian Pose
- merge -c1524 branches/stable-1.4: Moved globals.h to noinst_HEADERS. 2008-10-17, by Florian Pose
- merge -c1522 branches/stable-1.4: Fixed jace in jiffies timeout calculation. 2008-10-17, by Florian Pose
- TODO. 2008-10-17, by Florian Pose
- merge -c1521 branches/stable-1.4: Fixed race concerning ec_slave_config_state->operational. 2008-10-17, by Florian Pose
- Fixed receiving for e100, 2.6.26. 2008-10-17, by Florian Pose
- *space without whitespace; licensing; userspace interfaces. 2008-10-16, by Florian Pose
- Minor change. 2008-10-16, by Florian Pose
- Ignore modules.order. 2008-10-16, by Florian Pose
- Use .fault handler instead of .nopage handler from 2.6.23. 2008-10-16, by Florian Pose
- Fixed VoE data reading in userspace. 2008-10-15, by Florian Pose
- Version 1.5.0; VoE documentation. 2008-10-15, by Florian Pose
- sec:ecrt is a chapter; sec:eoeimp -> sec:eoe, ... 2008-10-15, by Florian Pose
- Maintained code docs. 2008-10-15, by Florian Pose
- Improved VoE docs. 2008-10-15, by Florian Pose
- Added LGPL licence headers to userspace library. 2008-10-14, by Florian Pose
- TODO. 2008-10-14, by Florian Pose
- Implemented VoE handler in userspace. 2008-10-14, by Florian Pose
- Added ec_slave_config_find_voe_handler(). 2008-10-14, by Florian Pose
- Added e100 for kernel 2.6.24, provided by Mathias Weber. 2008-10-14, by Florian Pose
- Replaced sleep() with pause(). 2008-10-14, by Florian Pose
- TODO, NEWS. 2008-10-10, by Florian Pose
- Added state functions; writing of process data works. 2008-10-10, by Florian Pose
- Memory-mapped process data. 2008-10-10, by Florian Pose
- Made ecrt_domain_size() const. 2008-10-10, by Florian Pose
- Warning. 2008-10-09, by Florian Pose
- Added some slave configuration methods. 2008-10-09, by Florian Pose
- Moved byteorder macros to ecrt.h. 2008-10-09, by Florian Pose
- Added configure switch for disabling the command-line tool. 2008-10-09, by Florian Pose
- Added ec_master_get_config(). 2008-10-09, by Florian Pose
- Added e100 driver for kernel 2.6.26 basically provided by Mario 2008-10-09, by Florian Pose
- Applied patch by Mario Witkowski to support the new class/device 2008-10-09, by Florian Pose
- Userspace example with priority. 2008-10-02, by Florian Pose
- External memory only in kernel space. 2008-10-02, by Florian Pose
- Activate, Send and received; cyclic timer with setitimer(). 2008-10-02, by Florian Pose
- Creating slave configurations. 2008-10-02, by Florian Pose
- Minor change. 2008-10-02, by Florian Pose
- No kernel handles in userspace; Domain creation. 2008-10-02, by Florian Pose
- Added changes since 1.4.0-rc2. 2008-10-02, by Florian Pose
- First version of userspace library with requesting/releasing. 2008-10-01, by Florian Pose
- Moved threads to kthread interface. 2008-10-01, by Florian Pose
- Removed watchdog debugging output. 2008-10-01, by Florian Pose
- Used ERR_PTR() macro for return value of ecrt_request_master(). 2008-10-01, by Florian Pose
- Added missing header. 2008-10-01, by Florian Pose
- Avoided using #ifdef inside a macro. 2008-10-01, by Florian Pose
- Fixed warning on some compilers. 2008-10-01, by Florian Pose
- Removed r8169 and forcedeth relics. 2008-09-30, by Florian Pose
- Removed untested r8169 driver. 2008-09-30, by Florian Pose
- Removed the forcedeth drivers. 2008-09-30, by Florian Pose
- Removed e100 driver for kernel 2.6.18. 2008-09-30, by Florian Pose
- e100 NEWS. 2008-09-30, by Florian Pose
- Fixed freeing transmit socket buffers. 2008-09-30, by Florian Pose
- Fixed re-using RFDs. 2008-09-30, by Florian Pose
- Frame reception basically working (still some more testing needed). 2008-09-30, by Florian Pose
- Added e100 driver for 2.6.20, sending works, receiving still disabled. 2008-09-30, by Florian Pose
- Introduced ecrt_voe_handler_received_header(); renamed 2008-09-30, by Florian Pose
- Introduced ec_datagram_zero(). 2008-09-30, by Florian Pose
- Fixed VoE mailbox type. 2008-09-29, by Florian Pose
- Added missing up(). 2008-09-29, by Florian Pose
- Applied patch by Karsten Schwinne, adding a few header files necessary 2008-09-24, by Florian Pose
- TODO. 2008-09-24, by Florian Pose
- Fixed minor supported mailbox protocol display bug. 2008-09-24, by Florian Pose
- Only query Sdo information service, if slave supports it. 2008-09-24, by Florian Pose
- Introduced VoE header. 2008-09-22, by Florian Pose
- Introduced EC_MBOX_HEADER_SIZE. 2008-09-22, by Florian Pose
- Changed VoE mailbox type to 0xff. 2008-09-22, by Florian Pose
- Added missing export. 2008-09-22, by Florian Pose
- udev docs. 2008-09-04, by Florian Pose
- TODO. 2008-09-03, by Florian Pose
- mini top. 2008-09-03, by Florian Pose
- Removed branch information. 2008-09-01, by Florian Pose
- NEWS. 2008-09-01, by Florian Pose
- Added VoE handler. 2008-09-01, by Florian Pose
- Changed version to 'devel'. 2008-08-27, by Florian Pose
- merge -c1434 branches/stable-1.4: Fixed nodist. 2008-08-27, by Florian Pose
- NEWS 2008-08-27, by Florian Pose
- 1.4.0-rc2 NEWS 2008-08-27, by Florian Pose
- Removed examples; fixed undefines references; preliminary version. 2008-08-22, by Florian Pose
- Some more documentation... 2008-08-14, by Florian Pose
- Next changes for the documentation. 2008-08-13, by Florian Pose
- TODO. 2008-08-13, by Florian Pose
- Added phy commands. 2008-08-13, by Florian Pose
- Fixed spacing. 2008-08-13, by Florian Pose
- Fixed race concerning thread signaling when master thread had no 2008-08-08, by Florian Pose
- Fixed missing up(). 2008-08-08, by Florian Pose
- Fixed missing up(). 2008-08-08, by Florian Pose
- TAGS creation. 2008-08-08, by Florian Pose
- Added missing header. 2008-08-07, by Florian Pose
- Added some documentation. 2008-08-01, by Florian Pose
- Removed a few old scripts. 2008-08-01, by Florian Pose
- Version 1.4.0-rc1. 2008-08-01, by Florian Pose
- Added spaces to init script. 2008-08-01, by Florian Pose
- Use down_interruptible() wherever possible. 2008-08-01, by Florian Pose
- Don't show Pdo (entry) names in configuration output. 2008-08-01, by Florian Pose
- Show Pdo bit lengths right-aligned. 2008-08-01, by Florian Pose
- Attach Pdo names from dictionary. 2008-08-01, by Florian Pose
- Repaired init script status command. 2008-08-01, by Florian Pose
- Introduced SdoCommand class to replace coe_datatypes.[ch]; added CoE abort codes in user space- 2008-08-01, by Florian Pose
- Removed sync manager assign source. 2008-08-01, by Florian Pose
- ApplicationInterface 2008-08-01, by Florian Pose
- Added debugging for configuration function of the application interface. 2008-08-01, by Florian Pose
- Configure Pdos before configuring the Pdo sync managers, 2008-08-01, by Florian Pose
- Added analog output to minimal example. 2008-08-01, by Florian Pose
- Fixed reconfiguration: Force config when application detaches. 2008-08-01, by Florian Pose
- Minor change. 2008-08-01, by Florian Pose
- TODO. 2008-07-31, by Florian Pose
- Avoided compiler warning. 2008-07-31, by Florian Pose
- Major Pdo configuration change: Read mapping of unknown Pdos during 2008-07-31, by Florian Pose
- Only warn (and do not abort) if Pdo assignment/mapping configuration 2008-07-31, by Florian Pose
- Fixed attached slave position in 'ethercat config' -> decimal. 2008-07-30, by Florian Pose
- Alternative Pdo assignment for el3162. 2008-07-29, by Florian Pose
- TODO. 2008-07-29, by Florian Pose
- Use expedited transfer type for Sdos <= 4 byte. 2008-07-29, by Florian Pose
- Added noinst_HEADERS variable. 2008-07-28, by Florian Pose
- Improved help. 2008-07-28, by Florian Pose
- Removed global variables. 2008-07-28, by Florian Pose
- Added 'ethercat version' command. 2008-07-28, by Florian Pose
- Fixed svnversion path argument. 2008-07-28, by Florian Pose
- Minor changes. 2008-07-28, by Florian Pose
- Display real ethernet address. 2008-07-28, by Florian Pose
- Accept '-' as filename to read from stdin. 2008-07-28, by Florian Pose
- Removed MasterDevice::slaveCount(). 2008-07-28, by Florian Pose
- Improved alias/position addressing in case od duplicated aliases. 2008-07-28, by Florian Pose
- Removed parameter values 'all'. 2008-07-28, by Florian Pose
- Added --help for alias and position parameters. 2008-07-28, by Florian Pose
- Implemented alias and position for configs. 2008-07-28, by Florian Pose
- Common message for single slave selections. 2008-07-28, by Florian Pose
- Fixed missing protection for a spin_lock_irqrestore() call. 2008-07-28, by Florian Pose
- NEWS. 2008-07-28, by Florian Pose
- No need to call e1000 watchdog when frames are received (thanks to O. Zarges). 2008-07-28, by Florian Pose
- Alias/Position selection. 2008-07-25, by Florian Pose
- Fixed requested_state. 2008-07-25, by Florian Pose
- Minor change. 2008-07-25, by Florian Pose
- Renamed state field to al_state. 2008-07-25, by Florian Pose
- Show attached slave position and state in 'ethercat config'. 2008-07-25, by Florian Pose
- Moved slaveState() to Command::alStateString(). 2008-07-25, by Florian Pose
- Force reconfiguration after attachment. 2008-07-24, by Florian Pose
- Bugfixes and improvements. 2008-07-24, by Florian Pose
- Fixed duplicate alias command. 2008-07-24, by Florian Pose
- Redesigned command interface. 2008-07-24, by Florian Pose
- Minor fixes. 2008-07-24, by Florian Pose
- Command-line help in the docs. 2008-07-24, by Florian Pose
- Output requested help to stdout, help on invalid usage to stderr. 2008-07-24, by Florian Pose
- TODO. 2008-07-23, by Florian Pose
- Added command-line help for every ethercat command. 2008-07-23, by Florian Pose
- Improved exceptions and commandName usage. 2008-07-23, by Florian Pose
- Fixed sdoUpload(). 2008-07-23, by Florian Pose
- Renamed sdo_download command to download. Same with upload. 2008-07-23, by Florian Pose
- Updated docs. 2008-07-23, by Florian Pose
- TODO. 2008-07-23, by Florian Pose
- TODO. 2008-07-22, by Florian Pose
- Updated first part of command documentation. 2008-07-22, by Florian Pose
- Replace abbreviation by full command. 2008-07-22, by Florian Pose
- Fixed typos. 2008-07-22, by Florian Pose
- Improved abbreviation. 2008-07-22, by Florian Pose
- Moved every command into a separate file. 2008-07-22, by Florian Pose
- Command abbreviation. 2008-07-22, by Florian Pose
- TODO. 2008-07-22, by Florian Pose
- Fixed SII reading timeout bug on 100 Hz kernels. 2008-07-22, by Florian Pose
- First step of moving to command list. 2008-07-21, by Florian Pose
- helpRequested. 2008-07-21, by Florian Pose
- Moved tools to tool. 2008-07-21, by Florian Pose
- TODO. 2008-07-21, by Florian Pose
- helpWanted; cmdName. 2008-07-18, by Florian Pose
- TODO. 2008-07-18, by Florian Pose
- Improved WC changes message. 2008-07-18, by Florian Pose
- Sdo configuration debugging. 2008-07-17, by Florian Pose
- Output Sdo configuration header even if no Sdos were configured. 2008-07-17, by Florian Pose
- Updated doc. 2008-07-17, by Florian Pose
- Fixed CoE transfer timeout bug. 2008-07-17, by Florian Pose
- Improved timeout error messages. 2008-07-14, by Florian Pose
- Added Mandatory attribute for XML Pdo elements. 2008-07-10, by Florian Pose
- Group/Image/Order strings in slave ioctl; order number as text content 2008-07-10, by Florian Pose
- Added ec_cdev_strcpy() function. 2008-07-10, by Florian Pose
- Fixme. 2008-07-08, by Florian Pose
- Added depmod call to docs. 2008-07-08, by Florian Pose
- Sort configuration list. 2008-07-08, by Florian Pose
- Added attention to ecrt_slave_config_sdo(). 2008-07-08, by Florian Pose
- Output category names. 2008-07-07, by Florian Pose
- Implemented 'ethercat sii_read -v'. 2008-07-07, by Florian Pose
- Break domain output data after 16 bytes. 2008-07-07, by Florian Pose
- Show domain data only if verbose. 2008-07-07, by Florian Pose
- Made verbosity a master property; added -Wall flag to tools. 2008-07-07, by Florian Pose
- todo. 2008-07-07, by Florian Pose
- Using EC_END. 2008-07-04, by Florian Pose
- Minor change. 2008-07-04, by Florian Pose
- Ethernet devices. 2008-07-04, by Florian Pose
- App interface; doxygen; bib. 2008-07-04, by Florian Pose
- Fixed line. 2008-07-04, by Florian Pose
- Improved source code doc. 2008-07-04, by Florian Pose
- Improved doc; removed BACKUP variables. 2008-07-04, by Florian Pose
- Minor change. 2008-07-04, by Florian Pose
- Generate pdfs with makefile. 2008-07-04, by Florian Pose
- Master locks image. 2008-07-04, by Florian Pose
- prepared command-line tool. 2008-07-04, by Florian Pose
- Doc: Architecture, master module, system integration. 2008-07-04, by Florian Pose
- Started to re-write the documentation. 2008-07-03, by Florian Pose
- NEWS. 2008-07-02, by Florian Pose
- Updated header docs, features and news file. 2008-07-02, by Florian Pose
- Renamed ecrt_slave_config_sync_managers() to ecrt_slave_config_pdos(); 2008-07-02, by Florian Pose
- Minor change. 2008-07-02, by Florian Pose
- Removed MSR example; adapted RTAI example; README files for examples. 2008-07-02, by Florian Pose
- Improved locking between ioctl()s and master state machine; separate 2008-07-02, by Florian Pose
- Added ec_master_find_domain_const(). 2008-07-02, by Florian Pose
- Added ec_master_find_slave_const(). 2008-07-02, by Florian Pose
- TODO. 2008-07-01, by Florian Pose
- Implemented master semaphore to secure concurrent access from ioctls, state machine and realtime interface. 2008-07-01, by Florian Pose
- Added Kbuild files to BUILT_SOURCES in Makefile.am files to create dependencies. 2008-06-30, by Florian Pose
- Sync manager and name information in xml. 2008-06-30, by Florian Pose
- Improved input/output of hex numbers. 2008-06-30, by Florian Pose
- Added Fixed="1" to Pdo element. 2008-06-30, by Florian Pose
- Xml: Output sync manager index with Pdo. 2008-06-30, by Florian Pose
- Output slave headers in 'ethercat slaves'; show alias only if set. 2008-06-27, by Florian Pose
- Alias decimal. 2008-06-27, by Florian Pose
- Removed TODOx:y-Output. 2008-06-27, by Florian Pose
- Added configuration listing command. 2008-06-27, by Florian Pose
- United 'ethercat slaves' and 'ethercat list' with a verbose flag. 2008-06-27, by Florian Pose
- Avoid duplicate reconfiguration. 2008-06-27, by Florian Pose
- TODO. 2008-06-27, by Florian Pose
- Show sync manager index in 'ethercat domain'. 2008-06-26, by Florian Pose
- Adapted minimal example to sync manager configuration interface. 2008-06-26, by Florian Pose
- Fixed sync manager direction bug. 2008-06-26, by Florian Pose
- Minor change. 2008-06-26, by Florian Pose
- Begin reading of Pdo assignment at sync manager 2; removed some 2008-06-26, by Florian Pose
- Operational flag in 'ethercat config'. 2008-06-26, by Florian Pose
- Configuration error, if sync manager configuration configuration with 2008-06-26, by Florian Pose
- Store sync manager configurations in ec_slave_config_t instead of Pdo 2008-06-26, by Florian Pose
- Return out of ecrt_slave_config_pdos() when pdo_infos == NULL 2008-06-24, by Richard Hacker
- Central CoE timeouts; retry on CoE response mismatch. 2008-06-23, by Florian Pose
- Added a timeout for Sdo configurations. 2008-06-23, by Florian Pose
- Added ec_pdo_list_print(). 2008-06-23, by Florian Pose
- Added some debugging. 2008-06-23, by Florian Pose
- Minor change. 2008-06-23, by Florian Pose
- TODO. 2008-06-20, by Florian Pose
- Fixed alias bug. 2008-06-20, by Florian Pose
- TODO. 2008-06-20, by Florian Pose
- Introduced global upload timeout for fsm_coe_map. 2008-06-19, by Florian Pose
- Timeouts set for various uploads in FSM COE MAP 2008-06-19, by Richard Hacker
- Response timeout for checking Sdo upload. 2008-06-19, by Florian Pose
- TODO. 2008-06-19, by Florian Pose
- Removed state machine cycle time measuring. 2008-06-19, by Florian Pose
- Disable use of CPU timestamp counter by default. 2008-06-19, by Florian Pose
- Use jiffies instead of cycles in SII state machine. 2008-06-19, by Florian Pose
- Use jiffies instead of cycles in CoE state machine. 2008-06-19, by Florian Pose
- Store abort code in sdo request; output it in user space; added some 2008-06-19, by Florian Pose
- Check for data sizes when reading Pdo assignment/mapping from CoE. 2008-06-19, by Florian Pose
- Added response timeout to sdo_request; removed timout from fsm_coe_map. 2008-06-19, by Florian Pose
- Retry reading assigned pdos using timeout. 2008-06-18, by Richard Hacker
- Retry reading Pdo assignment. 2008-06-18, by Florian Pose
- working_counter = 0x0000; 2008-06-18, by Florian Pose
- Removed 'end' and 'error' states from master state machine. 2008-06-18, by Florian Pose
- Bugfix: Bitlength always decimal in XML. 2008-06-18, by Florian Pose
- Renamed master 'mode' to 'phase'. 2008-06-18, by Florian Pose
- Removed configs_attached flag; changed return value of 2008-06-18, by Florian Pose
- Fixed analog in position. 2008-06-18, by Florian Pose
- Minor changes to minimal example. 2008-06-18, by Florian Pose
- Output attachment failure messages only when debugging. 2008-06-18, by Florian Pose
- Minor change. 2008-06-18, by Florian Pose
- Only load default assignment, if slave was attached. 2008-06-18, by Florian Pose
- Implemented ecrt_slave_config_state(); minor changes in 2008-06-18, by Florian Pose
- Set slave_states to 0x00 when no slaves are present. 2008-06-18, by Florian Pose
- Completed ec_master_state_t and documented ec_master_state_t and 2008-06-18, by Florian Pose
- Removed some unnecessary code. 2008-06-18, by Florian Pose
- Completed master states. 2008-06-17, by Richard Hacker
- Updated install script; udev rule. 2008-06-17, by Florian Pose
- Remove manual creation of device nodes, this is done by udev. 2008-06-17, by Florian Pose
- Added support for different versions of class_device_create(). 2008-06-17, by Florian Pose
- Replaced include sysfs->device. 2008-06-17, by Florian Pose
- Create class device with device_number information in sysfs. 2008-06-17, by Florian Pose
- Create device class. Preparation for device numbers in sysfs. 2008-06-17, by Florian Pose
- Improved ecdev_offer(). 2008-06-17, by Florian Pose
- Reverted revision number checking from r1228. 2008-06-17, by Florian Pose
- Added revision number to slave type checking. 2008-06-16, by Florian Pose
- TODO. 2008-06-12, by Florian Pose
- Minor change. 2008-06-12, by Florian Pose
- Added a few debugging messages. 2008-06-12, by Florian Pose
- Minor change. 2008-06-12, by Florian Pose
- Fixed duplicate kfree() bug. 2008-06-12, by Florian Pose
- Minor change. 2008-06-12, by Florian Pose
- Fixed bug in slave scanning, causing a segmentation fault. 2008-06-12, by Florian Pose
- Removed EC_IOCTL_DOMAIN_COUNT. 2008-06-12, by Florian Pose
- Store slaves in an array instead of a list. 2008-06-12, by Florian Pose
- Removed unnecessary code. 2008-06-12, by Florian Pose
- Replaced a few GFP_ATOMIC allocations with GFP_KERNEL ones. 2008-06-12, by Florian Pose
- Removed kobject from master and module. Sysfs is gone! 2008-06-12, by Florian Pose
- Removed deprecated default_config flag. 2008-06-12, by Florian Pose
- Removed kobject from slave_config. 2008-06-12, by Florian Pose
- Clear domains before slave configs, because domain references the FMMU 2008-06-12, by Florian Pose
- Removed kobject from domain. 2008-06-12, by Florian Pose
- Removed kobjects from sdo and slave. 2008-06-12, by Florian Pose
- Removed kobject from sdo entry. 2008-06-11, by Florian Pose
- Bus configuration via 'ethercat config'. 2008-06-11, by Florian Pose
- Slave information via 'ethercat slave'. 2008-06-11, by Florian Pose
- Improved 'ethercat ls' formatting. 2008-06-10, by Florian Pose
- Display error flag in 'ethercat ls'; cleaned up usage of error flag; 2008-06-10, by Florian Pose
- Replaced misleading %i by %u. 2008-06-10, by Florian Pose
- Fixed calculation of expected working counter. 2008-06-10, by Florian Pose
- TODO. 2008-06-10, by Florian Pose
- Output Sdo index at entry. 2008-06-10, by Florian Pose
- Open device with correct permissions immediately. 2008-06-10, by Florian Pose
- Output decoded ioctl command number. 2008-06-10, by Florian Pose
- Implemented SII writing (including alias writing) via ethercat command. 2008-06-10, by Florian Pose
- Renamed some fields in ec_sii_request_t to word addressing. 2008-06-09, by Florian Pose
- Implemented SII read. 2008-06-09, by Florian Pose
- Moved sii to words. 2008-06-09, by Florian Pose
- Removed debugging data. 2008-06-09, by Florian Pose
- Added debugging for sdo download. 2008-06-09, by Florian Pose
- Implemented Sdo download via ethercat command. 2008-06-09, by Florian Pose
- TODO. 2008-06-09, by Florian Pose
- ioctl() permissions. 2008-06-09, by Florian Pose
- Using Linux ioctl() number generation macros. 2008-06-09, by Florian Pose
- Display textual data type in 'ethercat sdos'. 2008-06-06, by Florian Pose
- process Sdo requests even with error_flag set. 2008-06-06, by Florian Pose
- Implemented sdo_upload command. 2008-06-06, by Florian Pose
- Added ec_slave_get_sdo_const(). 2008-06-06, by Florian Pose
- Added -q flag (quiet). 2008-06-06, by Florian Pose
- Implemented Sdo dictionary info via 'ethercat sdos'. 2008-06-06, by Florian Pose
- Added ec_slave_get_sdo_by_pos_const() and ec_slave_sdo_count(). 2008-06-06, by Florian Pose
- Added ec_sdo_get_entry_const(). 2008-06-06, by Florian Pose
- Renamed subindices to max_subindex. 2008-06-06, by Florian Pose
- Fixed bug in data size check for sysfs reading of sdo entries. 2008-06-06, by Florian Pose
- Request slave state(s) with 'ethercat state'; removed sysfs state file. 2008-06-06, by Florian Pose
- TODO. 2008-06-05, by Florian Pose
- Removed master info from sysfs. 2008-06-05, by Florian Pose
- Replaced EC_IOCTL_SLAVE_COUNT with EC_IOCTL_MASTER; implemented 2008-06-05, by Florian Pose
- Implemented 'ethercat debug' command. 2008-06-05, by Florian Pose
- Added 8139too 2.6.24 to dist. 2008-06-05, by Florian Pose
- Removed static from device. 2008-06-05, by Florian Pose
- Nicer usage. 2008-06-04, by Florian Pose
- TODO. 2008-06-04, by Florian Pose
- Improved output of 'ethercat domain'. 2008-06-04, by Florian Pose
- 'ethercat domain' shows domain contents and process data. 2008-06-04, by Florian Pose
- Implemented 'data' command. 2008-06-04, by Florian Pose
- Implemented domain command. 2008-06-04, by Florian Pose
- Removed O="". 2008-06-04, by Florian Pose
- Introduced ec_master_domain_count() and ec_master_find_domain(). 2008-06-04, by Florian Pose
- Improved out-of-place build. 2008-06-04, by Florian Pose
- Working counter as uint16_t. 2008-06-04, by Florian Pose
- Enable sync managers only if SII enable is set and size is greater zero. 2008-06-04, by Florian Pose
- Abort, if MAJOR number could not be determined. 2008-06-03, by Florian Pose
- Added debugging for ecrt_slave_config_reg_pdo_entry(). 2008-06-03, by Florian Pose
- TODO. 2008-06-03, by Florian Pose
- Check for matching data size when reading Sdo entries via sysfs. 2008-06-03, by Florian Pose
- Added 'xml' command to generate a slave description file from a real 2008-06-02, by Florian Pose
- Adapted to new entry syntax. 2008-06-02, by Florian Pose
- Added multi-slave support. 2008-06-02, by Florian Pose
- Added 'pdos' command to ethercat tool. 2008-06-02, by Florian Pose
- Added entry access functions. 2008-06-02, by Florian Pose
- Separated Pdo and Pdo entry classes. 2008-06-02, by Florian Pose
- Added ec_pdo_list_find_by_pos_const(). 2008-06-02, by Florian Pose
- Added ec_pdo_list_count(). 2008-06-02, by Florian Pose
- configs_attached = 0. 2008-05-30, by Florian Pose
- Added debugging. 2008-05-30, by Florian Pose
- Removed deprecated ec_slave_validate(). 2008-05-30, by Florian Pose
- Introduced ec_master_find_slave(). 2008-05-30, by Florian Pose
- Output subindices with %02X. 2008-05-30, by Florian Pose
- Some improvements concerning bit_position. 2008-05-30, by Florian Pose
- Fixed missing right brace 2008-05-30, by Richard Hacker
- Changed Pdo entry registration function - return byte and bit positions 2008-05-30, by Richard Hacker
- Added the new ethercat comman-line tool with lsec functionality. 2008-05-29, by Florian Pose
- Removed some xmldev survivors. 2008-05-29, by Florian Pose
- Added 8139too for kernel 2.6.24. 2008-05-29, by Andreas Stewering-Bone
- Removed xmldev. 2008-05-29, by Florian Pose
- TODO. 2008-05-29, by Florian Pose
- Fixed bug concerning listings package. 2008-05-29, by Florian Pose
- Added bitwise Pdo registration. 2008-05-28, by Florian Pose
- Fixed RevisionNo. 2008-05-28, by Florian Pose
- Added slaveinfo2xml.py. 2008-05-27, by Florian Pose
- Temporaryly removed r8169 from dist because of missing orig file. 2008-05-13, by Florian Pose
- Improved working counter output; fixed problem with slaves that have a single sync manager used for outputs. 2008-05-13, by Florian Pose
- Re-ordered TODO. 2008-04-25, by Florian Pose
- Fetch Sdo dictionaries and process SII requests in operation mode. 2008-04-25, by Florian Pose
- Removed ecdb.h 2008-04-25, by Florian Pose
- Replaced self_configured flag with force_config flag. 2008-04-25, by Florian Pose
- Improved master state machine. 2008-04-25, by Florian Pose
- Removed slave online flag. 2008-04-25, by Florian Pose
- Renamed state sdodict to sdo_dictionary. 2008-04-25, by Florian Pose
- Removed some debugging. 2008-04-25, by Florian Pose
- Improved a few debugging outputs. 2008-04-25, by Florian Pose
- Moved setting of the allow flags. 2008-04-25, by Florian Pose
- Removed ec_master_prepare(). 2008-04-25, by Florian Pose
- Removed bus validation; slave configuration during realtime operation; 2008-04-25, by Florian Pose
- TODO. 2008-04-24, by Florian Pose
- Added support for e1000 2.6.24, thanks to Matthias Luescher. 2008-04-18, by Florian Pose
- Added alpha support for the Realtek r8169 chipset, thanks to Scott 2008-04-18, by Florian Pose
- NEWS. 2008-04-18, by Florian Pose
- Check for emergency requests during CoE transfers. 2008-04-18, by Florian Pose
- Improved EC_WRITE macros by replacing in-situ conversions 2008-04-16, by Florian Pose
- Exported ecrt_slave_config_sdo(); added documentation. 2008-04-16, by Florian Pose
- Added vim modelines and properties. 2008-04-08, by Florian Pose
- Avoided duplicate datagram, if Pdo mapping/assignment does not have to 2008-04-07, by Florian Pose
- Debug messaged on configuring assignment and mapping. 2008-04-07, by Florian Pose
- Moved configuration of Pdo mapping before Pdo assignment. 2008-04-07, by Florian Pose
- Moved Pdo sync manager configuration before Pdo assignment in slave 2008-04-07, by Florian Pose
- Cleaned up graph and added fontname. 2008-04-07, by Florian Pose
- Added a few docs. 2008-04-07, by Florian Pose
- Removed unused domain state. 2008-04-07, by Florian Pose
- Fixed properties. 2008-04-03, by Florian Pose
- Equalized defines against duplicated header inclusion. 2008-04-03, by Florian Pose
- Removed dummy master. 2008-04-03, by Florian Pose
- Added missing jiffies header. 2008-04-03, by Florian Pose
- Implemented Sdo timeout. 2008-04-03, by Florian Pose
- Changed terms "Pdo mapping" -> "Pdo assignment" and "Pdo configuration" 2008-04-03, by Florian Pose
- Introduced EC_MAP_END. 2008-03-31, by Florian Pose
- Fixed minor bug. 2008-03-19, by Florian Pose
- Fixed general flags on big-endian archs. 2008-03-18, by Florian Pose
- Fixed access to data pointers in Pdo config and Pdo mapping FSM's. 2008-03-18, by Florian Pose
- Added CoE debugging. 2008-03-18, by Florian Pose
- Fixed bug in copying sync managers. Now making a deep copy. 2008-03-17, by Florian Pose
- Renamed EEPROM to SII. 2008-03-17, by Florian Pose
- Added some const's. 2008-03-17, by Florian Pose
- Allow multiple sync manager categories. 2008-03-17, by Florian Pose
- Added ecrt_sdo_request_data_size(). 2008-03-13, by Florian Pose
- Added documentation. 2008-03-13, by Florian Pose
- Minor changes. 2008-03-13, by Florian Pose
- TODO. 2008-03-06, by Florian Pose
- Minor change. 2008-03-04, by Florian Pose
- Updated docs. 2008-03-04, by Florian Pose
- Added doxygen markers. 2008-03-04, by Florian Pose
- Minor changes. 2008-03-04, by Florian Pose
- Introduced ec_sdo_request_state_t, making ec_request_t private again; 2008-03-04, by Florian Pose
- Minor change: Moved state assign to beginning. 2008-03-04, by Florian Pose
- Replaced ec_fsm_coe_\(upload\|download\)() with ec_fsm_coe_transfer(); 2008-03-04, by Florian Pose
- Basic reading realtime Sdo access working. 2008-03-04, by Florian Pose
- TODO. 2008-03-04, by Florian Pose
- Improved error messages on EEPROM writing. 2008-03-04, by Florian Pose
- TODO. 2008-03-03, by Florian Pose
- Removed ec_sdodata_t; CoE state machines work on ec_sdo_request_t. 2008-03-03, by Florian Pose
- Fixed bug if scanning is not allowed when link goes up. 2008-03-03, by Florian Pose
- Separated ec_sdo_request_init() and ec_sdo_request_read(). 2008-03-03, by Florian Pose
- Removed 'const' from Pdo configuration entries. 2008-03-03, by Florian Pose
- TODO. 2008-02-29, by Florian Pose
- Removed slave pointer from ec_sdo_request_t class. 2008-02-29, by Florian Pose
- TODO. 2008-02-29, by Florian Pose
- Saparated ec_sdo_t, ec_sdo_entry_t and ec_sdo_request_t. 2008-02-29, by Florian Pose
- Cross blinking. 2008-02-29, by Florian Pose
- TODO. 2008-02-28, by Florian Pose
- Fixed 2 bugs in new Pdo mapping function. 2008-02-28, by Florian Pose
- Added some debugging and fixed a bug, when Pdo was not found. 2008-02-28, by Florian Pose
- Added ecrt_slave_config_pdo() and ecrt_slave_config_pdo_entry(). 2008-02-28, by Florian Pose
- Added documentation. 2008-02-28, by Florian Pose
- Added documentation. 2008-02-28, by Florian Pose
- Renamed ec_pdo_mapping_find_pdo() to ec_pdo_mapping_find_pdo_const(). 2008-02-28, by Florian Pose
- Renamed ec_pdo_mapping_add_pdo() to ec_pdo_mapping_add_pdo_copy(). 2008-02-28, by Florian Pose
- NEWS. 2008-02-28, by Florian Pose
- Display notLRW flag. 2008-02-28, by Florian Pose
- Evaluate CoE details from general category; moved current consumption 2008-02-28, by Florian Pose
- Separated SII data from slave. 2008-02-27, by Florian Pose
- TODO. 2008-02-27, by Florian Pose