1

/* Intel PRO/1000 Linux driver

     2

 * Copyright(c) 1999 - 2014 Intel Corporation.

     3

 *

     4

 * This program is free software; you can redistribute it and/or modify it

     5

 * under the terms and conditions of the GNU General Public License,

     6

 * version 2, as published by the Free Software Foundation.

     7

 *

     8

 * This program is distributed in the hope it will be useful, but WITHOUT

     9

 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

    10

 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for

    11

 * more details.

    12

 *

    13

 * The full GNU General Public License is included in this distribution in

    14

 * the file called "COPYING".

    15

 *

    16

 * Contact Information:

    17

 * Linux NICS <linux.nics@intel.com>

    18

 * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>

    19

 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497

    20

 */

    21

    22

#include "e1000.h"

    23

    24

/**

    25

 *  e1000_raise_eec_clk - Raise EEPROM clock

    26

 *  @hw: pointer to the HW structure

    27

 *  @eecd: pointer to the EEPROM

    28

 *

    29

 *  Enable/Raise the EEPROM clock bit.

    30

 **/

    31

static void e1000_raise_eec_clk(struct e1000_hw *hw, u32 *eecd)

    32

{

    33

	*eecd = *eecd | E1000_EECD_SK;

    34

	ew32(EECD, *eecd);

    35

	e1e_flush();

    36

	udelay(hw->nvm.delay_usec);

    37

}

    38

    39

/**

    40

 *  e1000_lower_eec_clk - Lower EEPROM clock

    41

 *  @hw: pointer to the HW structure

    42

 *  @eecd: pointer to the EEPROM

    43

 *

    44

 *  Clear/Lower the EEPROM clock bit.

    45

 **/

    46

static void e1000_lower_eec_clk(struct e1000_hw *hw, u32 *eecd)

    47

{

    48

	*eecd = *eecd & ~E1000_EECD_SK;

    49

	ew32(EECD, *eecd);

    50

	e1e_flush();

    51

	udelay(hw->nvm.delay_usec);

    52

}

    53

    54

/**

    55

 *  e1000_shift_out_eec_bits - Shift data bits our to the EEPROM

    56

 *  @hw: pointer to the HW structure

    57

 *  @data: data to send to the EEPROM

    58

 *  @count: number of bits to shift out

    59

 *

    60

 *  We need to shift 'count' bits out to the EEPROM.  So, the value in the

    61

 *  "data" parameter will be shifted out to the EEPROM one bit at a time.

    62

 *  In order to do this, "data" must be broken down into bits.

    63

 **/

    64

static void e1000_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count)

    65

{

    66

	struct e1000_nvm_info *nvm = &hw->nvm;

    67

	u32 eecd = er32(EECD);

    68

	u32 mask;

    69

    70

	mask = 0x01 << (count - 1);

    71

	if (nvm->type == e1000_nvm_eeprom_spi)

    72

		eecd |= E1000_EECD_DO;

    73

    74

	do {

    75

		eecd &= ~E1000_EECD_DI;

    76

    77

		if (data & mask)

    78

			eecd |= E1000_EECD_DI;

    79

    80

		ew32(EECD, eecd);

    81

		e1e_flush();

    82

    83

		udelay(nvm->delay_usec);

    84

    85

		e1000_raise_eec_clk(hw, &eecd);

    86

		e1000_lower_eec_clk(hw, &eecd);

    87

    88

		mask >>= 1;

    89

	} while (mask);

    90

    91

	eecd &= ~E1000_EECD_DI;

    92

	ew32(EECD, eecd);

    93

}

    94

    95

/**

    96

 *  e1000_shift_in_eec_bits - Shift data bits in from the EEPROM

    97

 *  @hw: pointer to the HW structure

    98

 *  @count: number of bits to shift in

    99

 *

   100

 *  In order to read a register from the EEPROM, we need to shift 'count' bits

   101

 *  in from the EEPROM.  Bits are "shifted in" by raising the clock input to

   102

 *  the EEPROM (setting the SK bit), and then reading the value of the data out

   103

 *  "DO" bit.  During this "shifting in" process the data in "DI" bit should

   104

 *  always be clear.

   105

 **/

   106

static u16 e1000_shift_in_eec_bits(struct e1000_hw *hw, u16 count)

   107

{

   108

	u32 eecd;

   109

	u32 i;

   110

	u16 data;

   111

   112

	eecd = er32(EECD);

   113

	eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);

   114

	data = 0;

   115

   116

	for (i = 0; i < count; i++) {

   117

		data <<= 1;

   118

		e1000_raise_eec_clk(hw, &eecd);

   119

   120

		eecd = er32(EECD);

   121

   122

		eecd &= ~E1000_EECD_DI;

   123

		if (eecd & E1000_EECD_DO)

   124

			data |= 1;

   125

   126

		e1000_lower_eec_clk(hw, &eecd);

   127

	}

   128

   129

	return data;

   130

}

   131

   132

/**

   133

 *  e1000e_poll_eerd_eewr_done - Poll for EEPROM read/write completion

   134

 *  @hw: pointer to the HW structure

   135

 *  @ee_reg: EEPROM flag for polling

   136

 *

   137

 *  Polls the EEPROM status bit for either read or write completion based

   138

 *  upon the value of 'ee_reg'.

   139

 **/

   140

s32 e1000e_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg)

   141

{

   142

	u32 attempts = 100000;

   143

	u32 i, reg = 0;

   144

   145

	for (i = 0; i < attempts; i++) {

   146

		if (ee_reg == E1000_NVM_POLL_READ)

   147

			reg = er32(EERD);

   148

		else

   149

			reg = er32(EEWR);

   150

   151

		if (reg & E1000_NVM_RW_REG_DONE)

   152

			return 0;

   153

   154

		udelay(5);

   155

	}

   156

   157

	return -E1000_ERR_NVM;

   158

}

   159

   160

/**

   161

 *  e1000e_acquire_nvm - Generic request for access to EEPROM

   162

 *  @hw: pointer to the HW structure

   163

 *

   164

 *  Set the EEPROM access request bit and wait for EEPROM access grant bit.

   165

 *  Return successful if access grant bit set, else clear the request for

   166

 *  EEPROM access and return -E1000_ERR_NVM (-1).

   167

 **/

   168

s32 e1000e_acquire_nvm(struct e1000_hw *hw)

   169

{

   170

	u32 eecd = er32(EECD);

   171

	s32 timeout = E1000_NVM_GRANT_ATTEMPTS;

   172

   173

	ew32(EECD, eecd | E1000_EECD_REQ);

   174

	eecd = er32(EECD);

   175

   176

	while (timeout) {

   177

		if (eecd & E1000_EECD_GNT)

   178

			break;

   179

		udelay(5);

   180

		eecd = er32(EECD);

   181

		timeout--;

   182

	}

   183

   184

	if (!timeout) {

   185

		eecd &= ~E1000_EECD_REQ;

   186

		ew32(EECD, eecd);

   187

		e_dbg("Could not acquire NVM grant\n");

   188

		return -E1000_ERR_NVM;

   189

	}

   190

   191

	return 0;

   192

}

   193

   194

/**

   195

 *  e1000_standby_nvm - Return EEPROM to standby state

   196

 *  @hw: pointer to the HW structure

   197

 *

   198

 *  Return the EEPROM to a standby state.

   199

 **/

   200

static void e1000_standby_nvm(struct e1000_hw *hw)

   201

{

   202

	struct e1000_nvm_info *nvm = &hw->nvm;

   203

	u32 eecd = er32(EECD);

   204

   205

	if (nvm->type == e1000_nvm_eeprom_spi) {

   206

		/* Toggle CS to flush commands */

   207

		eecd |= E1000_EECD_CS;

   208

		ew32(EECD, eecd);

   209

		e1e_flush();

   210

		udelay(nvm->delay_usec);

   211

		eecd &= ~E1000_EECD_CS;

   212

		ew32(EECD, eecd);

   213

		e1e_flush();

   214

		udelay(nvm->delay_usec);

   215

	}

   216

}

   217

   218

/**

   219

 *  e1000_stop_nvm - Terminate EEPROM command

   220

 *  @hw: pointer to the HW structure

   221

 *

   222

 *  Terminates the current command by inverting the EEPROM's chip select pin.

   223

 **/

   224

static void e1000_stop_nvm(struct e1000_hw *hw)

   225

{

   226

	u32 eecd;

   227

   228

	eecd = er32(EECD);

   229

	if (hw->nvm.type == e1000_nvm_eeprom_spi) {

   230

		/* Pull CS high */

   231

		eecd |= E1000_EECD_CS;

   232

		e1000_lower_eec_clk(hw, &eecd);

   233

	}

   234

}

   235

   236

/**

   237

 *  e1000e_release_nvm - Release exclusive access to EEPROM

   238

 *  @hw: pointer to the HW structure

   239

 *

   240

 *  Stop any current commands to the EEPROM and clear the EEPROM request bit.

   241

 **/

   242

void e1000e_release_nvm(struct e1000_hw *hw)

   243

{

   244

	u32 eecd;

   245

   246

	e1000_stop_nvm(hw);

   247

   248

	eecd = er32(EECD);

   249

	eecd &= ~E1000_EECD_REQ;

   250

	ew32(EECD, eecd);

   251

}

   252

   253

/**

   254

 *  e1000_ready_nvm_eeprom - Prepares EEPROM for read/write

   255

 *  @hw: pointer to the HW structure

   256

 *

   257

 *  Setups the EEPROM for reading and writing.

   258

 **/

   259

static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw)

   260

{

   261

	struct e1000_nvm_info *nvm = &hw->nvm;

   262

	u32 eecd = er32(EECD);

   263

	u8 spi_stat_reg;

   264

   265

	if (nvm->type == e1000_nvm_eeprom_spi) {

   266

		u16 timeout = NVM_MAX_RETRY_SPI;

   267

   268

		/* Clear SK and CS */

   269

		eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);

   270

		ew32(EECD, eecd);

   271

		e1e_flush();

   272

		udelay(1);

   273

   274

		/* Read "Status Register" repeatedly until the LSB is cleared.

   275

		 * The EEPROM will signal that the command has been completed

   276

		 * by clearing bit 0 of the internal status register.  If it's

   277

		 * not cleared within 'timeout', then error out.

   278

		 */

   279

		while (timeout) {

   280

			e1000_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI,

   281

						 hw->nvm.opcode_bits);

   282

			spi_stat_reg = (u8)e1000_shift_in_eec_bits(hw, 8);

   283

			if (!(spi_stat_reg & NVM_STATUS_RDY_SPI))

   284

				break;

   285

   286

			udelay(5);

   287

			e1000_standby_nvm(hw);

   288

			timeout--;

   289

		}

   290

   291

		if (!timeout) {

   292

			e_dbg("SPI NVM Status error\n");

   293

			return -E1000_ERR_NVM;

   294

		}

   295

	}

   296

   297

	return 0;

   298

}

   299

   300

/**

   301

 *  e1000e_read_nvm_eerd - Reads EEPROM using EERD register

   302

 *  @hw: pointer to the HW structure

   303

 *  @offset: offset of word in the EEPROM to read

   304

 *  @words: number of words to read

   305

 *  @data: word read from the EEPROM

   306

 *

   307

 *  Reads a 16 bit word from the EEPROM using the EERD register.

   308

 **/

   309

s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)

   310

{

   311

	struct e1000_nvm_info *nvm = &hw->nvm;

   312

	u32 i, eerd = 0;

   313

	s32 ret_val = 0;

   314

   315

	/* A check for invalid values:  offset too large, too many words,

   316

	 * too many words for the offset, and not enough words.

   317

	 */

   318

	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||

   319

	    (words == 0)) {

   320

		e_dbg("nvm parameter(s) out of bounds\n");

   321

		return -E1000_ERR_NVM;

   322

	}

   323

   324

	for (i = 0; i < words; i++) {

   325

		eerd = ((offset + i) << E1000_NVM_RW_ADDR_SHIFT) +

   326

		    E1000_NVM_RW_REG_START;

   327

   328

		ew32(EERD, eerd);

   329

		ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ);

   330

		if (ret_val)

   331

			break;

   332

   333

		data[i] = (er32(EERD) >> E1000_NVM_RW_REG_DATA);

   334

	}

   335

   336

	return ret_val;

   337

}

   338

   339

/**

   340

 *  e1000e_write_nvm_spi - Write to EEPROM using SPI

   341

 *  @hw: pointer to the HW structure

   342

 *  @offset: offset within the EEPROM to be written to

   343

 *  @words: number of words to write

   344

 *  @data: 16 bit word(s) to be written to the EEPROM

   345

 *

   346

 *  Writes data to EEPROM at offset using SPI interface.

   347

 *

   348

 *  If e1000e_update_nvm_checksum is not called after this function , the

   349

 *  EEPROM will most likely contain an invalid checksum.

   350

 **/

   351

s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)

   352

{

   353

	struct e1000_nvm_info *nvm = &hw->nvm;

   354

	s32 ret_val = -E1000_ERR_NVM;

   355

	u16 widx = 0;

   356

   357

	/* A check for invalid values:  offset too large, too many words,

   358

	 * and not enough words.

   359

	 */

   360

	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||

   361

	    (words == 0)) {

   362

		e_dbg("nvm parameter(s) out of bounds\n");

   363

		return -E1000_ERR_NVM;

   364

	}

   365

   366

	while (widx < words) {

   367

		u8 write_opcode = NVM_WRITE_OPCODE_SPI;

   368

   369

		ret_val = nvm->ops.acquire(hw);

   370

		if (ret_val)

   371

			return ret_val;

   372

   373

		ret_val = e1000_ready_nvm_eeprom(hw);

   374

		if (ret_val) {

   375

			nvm->ops.release(hw);

   376

			return ret_val;

   377

		}

   378

   379

		e1000_standby_nvm(hw);

   380

   381

		/* Send the WRITE ENABLE command (8 bit opcode) */

   382

		e1000_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI,

   383

					 nvm->opcode_bits);

   384

   385

		e1000_standby_nvm(hw);

   386

   387

		/* Some SPI eeproms use the 8th address bit embedded in the

   388

		 * opcode

   389

		 */

   390

		if ((nvm->address_bits == 8) && (offset >= 128))

   391

			write_opcode |= NVM_A8_OPCODE_SPI;

   392

   393

		/* Send the Write command (8-bit opcode + addr) */

   394

		e1000_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits);

   395

		e1000_shift_out_eec_bits(hw, (u16)((offset + widx) * 2),

   396

					 nvm->address_bits);

   397

   398

		/* Loop to allow for up to whole page write of eeprom */

   399

		while (widx < words) {

   400

			u16 word_out = data[widx];

   401

   402

			word_out = (word_out >> 8) | (word_out << 8);

   403

			e1000_shift_out_eec_bits(hw, word_out, 16);

   404

			widx++;

   405

   406

			if ((((offset + widx) * 2) % nvm->page_size) == 0) {

   407

				e1000_standby_nvm(hw);

   408

				break;

   409

			}

   410

		}

   411

		usleep_range(10000, 20000);

   412

		nvm->ops.release(hw);

   413

	}

   414

   415

	return ret_val;

   416

}

   417

   418

/**

   419

 *  e1000_read_pba_string_generic - Read device part number

   420

 *  @hw: pointer to the HW structure

   421

 *  @pba_num: pointer to device part number

   422

 *  @pba_num_size: size of part number buffer

   423

 *

   424

 *  Reads the product board assembly (PBA) number from the EEPROM and stores

   425

 *  the value in pba_num.

   426

 **/

   427

s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num,

   428

				  u32 pba_num_size)

   429

{

   430

	s32 ret_val;

   431

	u16 nvm_data;

   432

	u16 pba_ptr;

   433

	u16 offset;

   434

	u16 length;

   435

   436

	if (pba_num == NULL) {

   437

		e_dbg("PBA string buffer was null\n");

   438

		return -E1000_ERR_INVALID_ARGUMENT;

   439

	}

   440

   441

	ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);

   442

	if (ret_val) {

   443

		e_dbg("NVM Read Error\n");

   444

		return ret_val;

   445

	}

   446

   447

	ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_1, 1, &pba_ptr);

   448

	if (ret_val) {

   449

		e_dbg("NVM Read Error\n");

   450

		return ret_val;

   451

	}

   452

   453

	/* if nvm_data is not ptr guard the PBA must be in legacy format which

   454

	 * means pba_ptr is actually our second data word for the PBA number

   455

	 * and we can decode it into an ascii string

   456

	 */

   457

	if (nvm_data != NVM_PBA_PTR_GUARD) {

   458

		e_dbg("NVM PBA number is not stored as string\n");

   459

   460

		/* make sure callers buffer is big enough to store the PBA */

   461

		if (pba_num_size < E1000_PBANUM_LENGTH) {

   462

			e_dbg("PBA string buffer too small\n");

   463

			return E1000_ERR_NO_SPACE;

   464

		}

   465

   466

		/* extract hex string from data and pba_ptr */

   467

		pba_num[0] = (nvm_data >> 12) & 0xF;

   468

		pba_num[1] = (nvm_data >> 8) & 0xF;

   469

		pba_num[2] = (nvm_data >> 4) & 0xF;

   470

		pba_num[3] = nvm_data & 0xF;

   471

		pba_num[4] = (pba_ptr >> 12) & 0xF;

   472

		pba_num[5] = (pba_ptr >> 8) & 0xF;

   473

		pba_num[6] = '-';

   474

		pba_num[7] = 0;

   475

		pba_num[8] = (pba_ptr >> 4) & 0xF;

   476

		pba_num[9] = pba_ptr & 0xF;

   477

   478

		/* put a null character on the end of our string */

   479

		pba_num[10] = '\0';

   480

   481

		/* switch all the data but the '-' to hex char */

   482

		for (offset = 0; offset < 10; offset++) {

   483

			if (pba_num[offset] < 0xA)

   484

				pba_num[offset] += '0';

   485

			else if (pba_num[offset] < 0x10)

   486

				pba_num[offset] += 'A' - 0xA;

   487

		}

   488

   489

		return 0;

   490

	}

   491

   492

	ret_val = e1000_read_nvm(hw, pba_ptr, 1, &length);

   493

	if (ret_val) {

   494

		e_dbg("NVM Read Error\n");

   495

		return ret_val;

   496

	}

   497

   498

	if (length == 0xFFFF || length == 0) {

   499

		e_dbg("NVM PBA number section invalid length\n");

   500

		return -E1000_ERR_NVM_PBA_SECTION;

   501

	}

   502

	/* check if pba_num buffer is big enough */

   503

	if (pba_num_size < (((u32)length * 2) - 1)) {

   504

		e_dbg("PBA string buffer too small\n");

   505

		return -E1000_ERR_NO_SPACE;

   506

	}

   507

   508

	/* trim pba length from start of string */

   509

	pba_ptr++;

   510

	length--;

   511

   512

	for (offset = 0; offset < length; offset++) {

   513

		ret_val = e1000_read_nvm(hw, pba_ptr + offset, 1, &nvm_data);

   514

		if (ret_val) {

   515

			e_dbg("NVM Read Error\n");

   516

			return ret_val;

   517

		}

   518

		pba_num[offset * 2] = (u8)(nvm_data >> 8);

   519

		pba_num[(offset * 2) + 1] = (u8)(nvm_data & 0xFF);

   520

	}

   521

	pba_num[offset * 2] = '\0';

   522

   523

	return 0;

   524

}

   525

   526

/**

   527

 *  e1000_read_mac_addr_generic - Read device MAC address

   528

 *  @hw: pointer to the HW structure

   529

 *