/*
  This file is part of CanFestival, a library implementing CanOpen
  Stack.

  Copyright (C): Edouard TISSERANT and Francis DUPIN

  See COPYING file for copyrights details.

  This library is free software; you can redistribute it and/or
  modify it under the terms of the GNU Lesser General Public
  License as published by the Free Software Foundation; either
  version 2.1 of the License, or (at your option) any later version.

  This library is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  Lesser General Public License for more details.

  You should have received a copy of the GNU Lesser General Public
  License along with this library; if not, write to the Free Software
  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307
  USA
*/
/*!
** @file   nmtSlave.c
** @author Edouard TISSERANT and Francis DUPIN
** @date   Tue Jun  5 08:50:53 2007
**
** @brief
**
**
*/
#include "nmtSlave.h"
#include "states.h"
#include "canfestival.h"
#include "sysdep.h"

/*!
** put the slave in the state wanted by the master
**
** @param d
** @param m
**/
void proceedNMTstateChange(CO_Data* d, Message *m)
{
  if( d->nodeState == Pre_operational ||
      d->nodeState == Operational ||
      d->nodeState == Stopped ) {

    MSG_WAR(0x3400, "NMT received. for node :  ", (*m).data[1]);

    /* Check if this NMT-message is for this node */
    /* byte 1 = 0 : all the nodes are concerned (broadcast) */

    if( ( (*m).data[1] == 0 ) || ( (*m).data[1] == *d->bDeviceNodeId ) ){

      switch( (*m).data[0]){ /* command specifier (cs) */
      case NMT_Start_Node:
        if ( (d->nodeState == Pre_operational) || (d->nodeState == Stopped) )
          setState(d,Operational);
        break;

      case NMT_Stop_Node:
        if ( d->nodeState == Pre_operational ||
             d->nodeState == Operational )
          setState(d,Stopped);
        break;

      case NMT_Enter_PreOperational:
        if ( d->nodeState == Operational ||
             d->nodeState == Stopped )
          setState(d,Pre_operational);
        break;

      case NMT_Reset_Node:
#ifdef CO_ENABLE_LSS
  		if(getNodeId(d)!=d->lss_transfer.nodeID)
  			setNodeId(d, d->lss_transfer.nodeID);
#endif
        setState(d,Initialisation);
        break;

      case NMT_Reset_Comunication:
#ifdef CO_ENABLE_LSS
  		if(getNodeId(d)!=d->lss_transfer.nodeID && getNodeId(d)>0 && getNodeId(d)<=127)
  			setNodeId(d, d->lss_transfer.nodeID);
#endif
        setState(d,Initialisation);
        break;

      }/* end switch */

    }/* end if( ( (*m).data[1] == 0 ) || ( (*m).data[1] ==
        bDeviceNodeId ) ) */
  }
}


/*!
**
**
** @param d
**
** @return
**/
UNS8 slaveSendBootUp(CO_Data* d)
{
  Message m;

#ifdef CO_ENABLE_LSS
  if(*d->bDeviceNodeId==0xFF)return 0;
#endif

  MSG_WAR(0x3407, "Send a Boot-Up msg ", 0);

  /* message configuration */
  {
	  UNS16 tmp = NODE_GUARD << 7 | *d->bDeviceNodeId; 
	  m.cob_id = UNS16_LE(tmp);
  }
  m.rtr = NOT_A_REQUEST;
  m.len = 1;
  m.data[0] = 0x00;

  return canSend(d->canHandle,&m);
}