objdictgen/doc/manual_en.pdf
author |
bmakuc <blaz.makuc@smarteh.si> |
|
Fri, 24 Mar 2017 10:52:38 +0100 |
changeset 796 |
1c87f7a8cb8a |
parent 567 |
8c71fdc46735
|
permissions |
-rw-r--r-- |
Send timeout is set to 10 ms. Without timeout PLC can be blocked by CAN driver: if CAN bus is not connected to controller CAN driver never returns and therfore PLC application halts. This is a temporary solution.